[GIT PULL 1/2] arm64: dts: ti: K3 devicetree updates for v6.15

[GIT PULL 1/2] arm64: dts: ti: K3 devicetree updates for v6.15

[Vignesh Raghavendra]

Hi ARM SoC Maintainers,


The following changes since commit 2014c95afecee3e76ca4a56956a936e23283f05b:

  Linux 6.14-rc1 (2025-02-02 15:39:26 -0800)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git tags/ti-k3-dt-for-v6.15

for you to fetch changes up to 377fde74eae4abcbcd5475676d58fb595a07ff85:

  arm64: dts: ti: k3-am62a-phycore-som: Reorder properties per DTS coding style (2025-03-07 18:48:05 +0530)

----------------------------------------------------------------
TI K3 device tree updates for v6.15

Generic Fixups/Cleanups:

SoC Specific features and Fixes:
AM62Ax:
Enable MCU domain pinctrl node

J784S4/J742S4:
GICD reg size fixes
Serdes lane ctrl reg mux mask fix

AM62P/J722s:
Wakeup UART0 sysc updates for system wakeup
pinctrl node fixes drop pinctrl-single,gpio-ranges
BCDMA CSI-RX support
Audio REFCLKx output support

Board Specific:
J784S4:
EVM: Cleanup duplicate gpio-hogs

J722S:
TypeC port mux selection fix

AM62Ax
SK: boot-phase tag to support USB bootmode
RTC support
Aliases for wakeup and MCU serial UARTs

AM62P
SK: boot-phase tag to support USB bootmode
USB wakeup support
Aliases for wakeup and MCU serial UARTs

AM62:
verdin-dahila: microphone support
SK: Aliases for wakeup and MCU serial UARTs
BeaglePlay: reserved CMA region for Multimedia applications

J721e:
SK/EVM: boot-phase tags for Serdes for DFU boot

Phytech board updates:
Boot-phase tag updates for AM64/AM62/AM62A boards
DTS coding style cleanups
RTOS IPC reserved-memory additions
DT overlay for X27 Connectors on AM64 SOMs

J721S2 SOM:
Add flash partitions

----------------------------------------------------------------
Daniel Schultz (1):
      arm64: dts: ti: am64-phyboard-electra: Add DT overlay for X27 connector

Francesco Dolcini (1):
      arm64: dts: ti: k3-am62p: Enable AUDIO_REFCLKx

Hrushikesh Salunke (1):
      arm64: dts: ti: k3-j722s-evm: Fix USB2.0_MUX_SEL to select Type-C

Jayesh Choudhary (1):
      arm64: dts: ti: k3-j784s4-evm-quad-port-eth-exp1: Remove duplicate hogs

Keerthy (1):
      arm64: dts: ti: k3-j784s4-j742s2-main-common: Correct the GICD size

Markus Schneider-Pargmann (2):
      arm64: dts: ti: k3-am62x-sk-common: Add serial aliases
      arm64: dts: ti: k3-am62a7-sk: Add serial alias

Michael Walle (2):
      arm64: dts: ti: k3-am62p: fix pinctrl settings
      arm64: dts: ti: k3-j722s: fix pinctrl settings

Nishanth Menon (1):
      arm64: dts: ti: k3-am625-beagleplay: Reserve 128MiB of global CMA

Sai Sree Kartheek Adivi (1):
      arm64: dts: ti: k3-am62a-mcu: enable mcu domain pinmux

Siddharth Vadapalli (6):
      arm64: dts: ti: k3-am62a7-sk: Add boot phase tag for USB0
      arm64: dts: ti: k3-am62p5-sk: Add boot phase tag for USB0
      arm64: dts: ti: k3-j721e-common-proc-board: Add boot phase tag to SERDES3
      arm64: dts: ti: k3-j721e-sk: Add boot phase tag to SERDES3
      arm64: dts: ti: k3-am62p5-sk: Support SoC wakeup using USB1 wakeup
      arm64: dts: ti: k3-j784s4-j742s2-main-common: Fix serdes_ln_ctrl reg-masks

Stefan Eichenberger (1):
      arm64: dts: ti: k3-am62-verdin-dahlia: add Microphone Jack to sound card

Udit Kumar (1):
      arm64: dts: ti: k3-j721s2-som-p0: Add flash partition details

Vaishnav Achath (3):
      arm64: dts: ti: k3-j722s-main: Add BCDMA CSI overrides
      arm64: dts: ti: k3-j722s-main: Add CSI2RX nodes
      arm64: dts: ti: k3-j722s-evm: Add camera peripherals

Vibhore Vardhan (3):
      arm64: dts: ti: k3-am62a7-sk: Add alias for RTC
      arm64: dts: ti: k3-am62p-j722s-common-wakeup: Configure ti-sysc for wkup_uart0
      arm64: dts: ti: k3-am62p5-sk: Add serial alias

Wadim Egorov (7):
      arm64: dts: ti: k3-am64-phycore-som: Reserve RTOS IPC memory
      arm64: dts: ti: k3-am62-phycore-som: Reserve RTOS IPC memory
      arm64: dts: ti: k3-am62x-phyboard-lyra: Add boot phase tags
      arm64: dts: ti: k3-am62a-phycore-som: Add boot phase tags
      arm64: dts: ti: k3-am642-phyboard-electra: Add boot phase tags
      arm64: dts: ti: k3-am642-phyboard-electra: Reorder properties per DTS coding style
      arm64: dts: ti: k3-am62a-phycore-som: Reorder properties per DTS coding style

 arch/arm64/boot/dts/ti/Makefile                               |   3 +
 arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi               |  25 +-
 arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi             |   6 +-
 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts                |   8 +
 arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi                      |   1 -
 arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi              |  19 +-
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts                       |   4 +
 arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi         |   8 -
 arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi      |  36 +-
 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi                     |  26 +-
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts                       |   4 +-
 arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi            |   9 +
 arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi                |   2 +
 arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi               |  33 +-
 arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts      |  19 +-
 .../ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso    |  63 +++
 arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts         |   1 +
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts                        |   1 +
 arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi                  |  41 ++
 arch/arm64/boot/dts/ti/k3-j722s-evm.dts                       |  30 +-
 arch/arm64/boot/dts/ti/k3-j722s-main.dtsi                     | 208 +++++++++-
 arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso  |   7 -
 arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi      |   6 +-
 23 files changed, 488 insertions(+), 72 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso
-- 
Regards
Vignesh
https://ti.com/opensource

[GIT PULL 2/2] arm64: defconfig: Updates for v6.15 for TI K3 platforms

[Vignesh Raghavendra]

The following changes since commit c7691aec5e991cec9c5c5fdab08c24856a1fc56f:

  arm64: defconfig: Enable TISCI Interrupt Router and Aggregator (2025-02-06 09:10:24 +0530)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git tags/ti-k3-config-for-v6.15

for you to fetch changes up to 75a41c26351a77cd5dd01e14d059eaf11358689c:

  arm64: defconfig: Enable SPI NAND flashes (2025-03-07 16:33:25 +0530)

----------------------------------------------------------------
TI K3 defconfig updates for v6.15

- Enable Support for SPI NAND flashes on AM62Ax/J721s2 and other boards
- HSR protocol support for AM65/AM64 ICSSG based multi-port ethernet
- Greybus modules to support CC1352P7 chips on BeaglePlay

----------------------------------------------------------------
Ayush Singh (1):
      arm64: defconfig: Enable gb_beagleplay

Ravi Gunasekaran (1):
      arm64: defconfig: Enable HSR protocol driver

Santhosh Kumar K (1):
      arm64: defconfig: Enable SPI NAND flashes

 arch/arm64/configs/defconfig | 4 ++++
 1 file changed, 4 insertions(+)

Re: [GIT PULL 1/2] arm64: dts: ti: K3 devicetree updates for v6.15

[patchwork-bot+linux-soc]

Hello:

This pull request was applied to soc/soc.git (for-next)
by Arnd Bergmann <arnd@arndb.de>:

On Wed, 12 Mar 2025 19:13:57 +0530 you wrote:
> Hi ARM SoC Maintainers,
> 
> 
> The following changes since commit 2014c95afecee3e76ca4a56956a936e23283f05b:
> 
>   Linux 6.14-rc1 (2025-02-02 15:39:26 -0800)
> 
> [...]

Here is the summary with links:
  - [GIT,PULL,1/2] arm64: dts: ti: K3 devicetree updates for v6.15
    https://git.kernel.org/soc/soc/c/35759662efff
  - [GIT,PULL,2/2] arm64: defconfig: Updates for v6.15 for TI K3 platforms
    https://git.kernel.org/soc/soc/c/1156ebe3f925

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html