* [PATCH rtw-next v3 01/14] wifi: rtw89: 8851b: Accept USB devices and load their MAC address
2025-06-20 18:51 [PATCH rtw-next v3 00/14] wifi: rtw89: Add support for USB devices Bitterblue Smith
@ 2025-06-20 18:53 ` Bitterblue Smith
2025-06-20 18:54 ` [PATCH rtw-next v3 02/14] wifi: rtw89: Make dle_mem in rtw89_chip_info an array Bitterblue Smith
` (12 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Bitterblue Smith @ 2025-06-20 18:53 UTC (permalink / raw)
To: linux-wireless@vger.kernel.org; +Cc: Ping-Ke Shih
Make rtw8851b_read_efuse() accept USB devices and load the MAC address
from the correct offset.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
---
v2:
- Add Acked-by.
v3:
- No change.
---
drivers/net/wireless/realtek/rtw89/rtw8851b.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8851b.c b/drivers/net/wireless/realtek/rtw89/rtw8851b.c
index 39df1a255095..6ba88ca2bab3 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8851b.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8851b.c
@@ -461,14 +461,6 @@ static int rtw8851b_pwr_off_func(struct rtw89_dev *rtwdev)
return 0;
}
-static void rtw8851b_efuse_parsing(struct rtw89_efuse *efuse,
- struct rtw8851b_efuse *map)
-{
- ether_addr_copy(efuse->addr, map->e.mac_addr);
- efuse->rfe_type = map->rfe_type;
- efuse->xtal_cap = map->xtal_k;
-}
-
static void rtw8851b_efuse_parsing_tssi(struct rtw89_dev *rtwdev,
struct rtw8851b_efuse *map)
{
@@ -549,12 +541,18 @@ static int rtw8851b_read_efuse(struct rtw89_dev *rtwdev, u8 *log_map,
switch (rtwdev->hci.type) {
case RTW89_HCI_TYPE_PCIE:
- rtw8851b_efuse_parsing(efuse, map);
+ ether_addr_copy(efuse->addr, map->e.mac_addr);
+ break;
+ case RTW89_HCI_TYPE_USB:
+ ether_addr_copy(efuse->addr, map->u.mac_addr);
break;
default:
return -EOPNOTSUPP;
}
+ efuse->rfe_type = map->rfe_type;
+ efuse->xtal_cap = map->xtal_k;
+
rtw89_info(rtwdev, "chip rfe_type is %d\n", efuse->rfe_type);
return 0;
--
2.49.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH rtw-next v3 02/14] wifi: rtw89: Make dle_mem in rtw89_chip_info an array
2025-06-20 18:51 [PATCH rtw-next v3 00/14] wifi: rtw89: Add support for USB devices Bitterblue Smith
2025-06-20 18:53 ` [PATCH rtw-next v3 01/14] wifi: rtw89: 8851b: Accept USB devices and load their MAC address Bitterblue Smith
@ 2025-06-20 18:54 ` Bitterblue Smith
2025-06-24 5:42 ` Ping-Ke Shih
2025-06-20 18:56 ` [PATCH rtw-next v3 03/14] wifi: rtw89: Make hfc_param_ini " Bitterblue Smith
` (11 subsequent siblings)
13 siblings, 1 reply; 22+ messages in thread
From: Bitterblue Smith @ 2025-06-20 18:54 UTC (permalink / raw)
To: linux-wireless@vger.kernel.org; +Cc: Ping-Ke Shih
USB 2, USB 3, and SDIO will need different sets of values compared to
PCIe.
Add a new dle_type member in struct rtw89_hci_info and make dle_mem in
struct rtw89_chip_info an array to hold the four different sets of
values.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
---
v2:
- Make dle_mem an array instead of having (eventually) four different
dle_mem_* members.
v3:
- Add null check for rtwdev->chip->dle_mem[rtwdev->hci.dle_type].
---
drivers/net/wireless/realtek/rtw89/core.h | 12 +++++++++++-
drivers/net/wireless/realtek/rtw89/mac.c | 7 ++++---
drivers/net/wireless/realtek/rtw89/pci.c | 1 +
drivers/net/wireless/realtek/rtw89/rtw8851b.c | 2 +-
drivers/net/wireless/realtek/rtw89/rtw8852a.c | 2 +-
drivers/net/wireless/realtek/rtw89/rtw8852b.c | 2 +-
drivers/net/wireless/realtek/rtw89/rtw8852bt.c | 2 +-
drivers/net/wireless/realtek/rtw89/rtw8852c.c | 2 +-
drivers/net/wireless/realtek/rtw89/rtw8922a.c | 2 +-
9 files changed, 22 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/core.h b/drivers/net/wireless/realtek/rtw89/core.h
index 328d4e9352fe..46d3512afb57 100644
--- a/drivers/net/wireless/realtek/rtw89/core.h
+++ b/drivers/net/wireless/realtek/rtw89/core.h
@@ -132,6 +132,15 @@ enum rtw89_hci_type {
RTW89_HCI_TYPE_SDIO,
};
+enum rtw89_hci_dle_type {
+ RTW89_HCI_DLE_TYPE_PCIE,
+ RTW89_HCI_DLE_TYPE_USB2,
+ RTW89_HCI_DLE_TYPE_USB3,
+ RTW89_HCI_DLE_TYPE_SDIO,
+
+ RTW89_HCI_DLE_TYPE_NUM,
+};
+
enum rtw89_core_chip_id {
RTL8852A,
RTL8852B,
@@ -3647,6 +3656,7 @@ struct rtw89_hci_ops {
struct rtw89_hci_info {
const struct rtw89_hci_ops *ops;
enum rtw89_hci_type type;
+ enum rtw89_hci_dle_type dle_type;
u32 rpwm_addr;
u32 cpwm_addr;
bool paused;
@@ -4346,7 +4356,7 @@ struct rtw89_chip_info {
bool dis_2g_40m_ul_ofdma;
u32 rsvd_ple_ofst;
const struct rtw89_hfc_param_ini *hfc_param_ini;
- const struct rtw89_dle_mem *dle_mem;
+ const struct rtw89_dle_mem *dle_mem[RTW89_HCI_DLE_TYPE_NUM];
u8 wde_qempty_acq_grpnum;
u8 wde_qempty_mgq_grpsel;
u32 rf_base_addr[2];
diff --git a/drivers/net/wireless/realtek/rtw89/mac.c b/drivers/net/wireless/realtek/rtw89/mac.c
index 8ec86e1fa9d6..7d3e6448423a 100644
--- a/drivers/net/wireless/realtek/rtw89/mac.c
+++ b/drivers/net/wireless/realtek/rtw89/mac.c
@@ -1717,12 +1717,13 @@ static const struct rtw89_dle_mem *get_dle_mem_cfg(struct rtw89_dev *rtwdev,
enum rtw89_qta_mode mode)
{
struct rtw89_mac_info *mac = &rtwdev->mac;
- const struct rtw89_dle_mem *cfg;
+ const struct rtw89_dle_mem *cfg, *cfgs;
- cfg = &rtwdev->chip->dle_mem[mode];
- if (!cfg)
+ cfgs = rtwdev->chip->dle_mem[rtwdev->hci.dle_type];
+ if (!cfgs)
return NULL;
+ cfg = &cfgs[mode];
if (cfg->mode != mode) {
rtw89_warn(rtwdev, "qta mode unmatch!\n");
return NULL;
diff --git a/drivers/net/wireless/realtek/rtw89/pci.c b/drivers/net/wireless/realtek/rtw89/pci.c
index 204a3748d913..597de632e364 100644
--- a/drivers/net/wireless/realtek/rtw89/pci.c
+++ b/drivers/net/wireless/realtek/rtw89/pci.c
@@ -4486,6 +4486,7 @@ int rtw89_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
rtwdev->pci_info = info->bus.pci;
rtwdev->hci.ops = &rtw89_pci_ops;
rtwdev->hci.type = RTW89_HCI_TYPE_PCIE;
+ rtwdev->hci.dle_type = RTW89_HCI_DLE_TYPE_PCIE;
rtwdev->hci.rpwm_addr = pci_info->rpwm_addr;
rtwdev->hci.cpwm_addr = pci_info->cpwm_addr;
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8851b.c b/drivers/net/wireless/realtek/rtw89/rtw8851b.c
index 6ba88ca2bab3..bd777b0c3f4d 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8851b.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8851b.c
@@ -2466,7 +2466,7 @@ const struct rtw89_chip_info rtw8851b_chip_info = {
.dis_2g_40m_ul_ofdma = true,
.rsvd_ple_ofst = 0x2f800,
.hfc_param_ini = rtw8851b_hfc_param_ini_pcie,
- .dle_mem = rtw8851b_dle_mem_pcie,
+ .dle_mem = {rtw8851b_dle_mem_pcie, NULL, NULL, NULL},
.wde_qempty_acq_grpnum = 4,
.wde_qempty_mgq_grpsel = 4,
.rf_base_addr = {0xe000},
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8852a.c b/drivers/net/wireless/realtek/rtw89/rtw8852a.c
index dc4eab2e7919..13fbc3a1b49e 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8852a.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8852a.c
@@ -2185,7 +2185,7 @@ const struct rtw89_chip_info rtw8852a_chip_info = {
.dis_2g_40m_ul_ofdma = true,
.rsvd_ple_ofst = 0x6f800,
.hfc_param_ini = rtw8852a_hfc_param_ini_pcie,
- .dle_mem = rtw8852a_dle_mem_pcie,
+ .dle_mem = {rtw8852a_dle_mem_pcie, NULL, NULL, NULL},
.wde_qempty_acq_grpnum = 16,
.wde_qempty_mgq_grpsel = 16,
.rf_base_addr = {0xc000, 0xd000},
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8852b.c b/drivers/net/wireless/realtek/rtw89/rtw8852b.c
index 1f1e10f2b39d..b2989cdcce34 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8852b.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8852b.c
@@ -821,7 +821,7 @@ const struct rtw89_chip_info rtw8852b_chip_info = {
.dis_2g_40m_ul_ofdma = true,
.rsvd_ple_ofst = 0x2f800,
.hfc_param_ini = rtw8852b_hfc_param_ini_pcie,
- .dle_mem = rtw8852b_dle_mem_pcie,
+ .dle_mem = {rtw8852b_dle_mem_pcie, NULL, NULL, NULL},
.wde_qempty_acq_grpnum = 4,
.wde_qempty_mgq_grpsel = 4,
.rf_base_addr = {0xe000, 0xf000},
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8852bt.c b/drivers/net/wireless/realtek/rtw89/rtw8852bt.c
index 4c34f5037908..762a1fc005d2 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8852bt.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8852bt.c
@@ -755,7 +755,7 @@ const struct rtw89_chip_info rtw8852bt_chip_info = {
.dis_2g_40m_ul_ofdma = true,
.rsvd_ple_ofst = 0x6f800,
.hfc_param_ini = rtw8852bt_hfc_param_ini_pcie,
- .dle_mem = rtw8852bt_dle_mem_pcie,
+ .dle_mem = {rtw8852bt_dle_mem_pcie, NULL, NULL, NULL},
.wde_qempty_acq_grpnum = 4,
.wde_qempty_mgq_grpsel = 4,
.rf_base_addr = {0xe000, 0xf000},
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8852c.c b/drivers/net/wireless/realtek/rtw89/rtw8852c.c
index b39add1b798c..c0d76d318b24 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8852c.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8852c.c
@@ -3005,7 +3005,7 @@ const struct rtw89_chip_info rtw8852c_chip_info = {
.dis_2g_40m_ul_ofdma = false,
.rsvd_ple_ofst = 0x6f800,
.hfc_param_ini = rtw8852c_hfc_param_ini_pcie,
- .dle_mem = rtw8852c_dle_mem_pcie,
+ .dle_mem = {rtw8852c_dle_mem_pcie, NULL, NULL, NULL},
.wde_qempty_acq_grpnum = 16,
.wde_qempty_mgq_grpsel = 16,
.rf_base_addr = {0xe000, 0xf000},
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8922a.c b/drivers/net/wireless/realtek/rtw89/rtw8922a.c
index ca32ccb00107..7854d6f30b6d 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8922a.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8922a.c
@@ -2860,7 +2860,7 @@ const struct rtw89_chip_info rtw8922a_chip_info = {
.dis_2g_40m_ul_ofdma = false,
.rsvd_ple_ofst = 0x8f800,
.hfc_param_ini = rtw8922a_hfc_param_ini_pcie,
- .dle_mem = rtw8922a_dle_mem_pcie,
+ .dle_mem = {rtw8922a_dle_mem_pcie, NULL, NULL, NULL},
.wde_qempty_acq_grpnum = 4,
.wde_qempty_mgq_grpsel = 4,
.rf_base_addr = {0xe000, 0xf000},
--
2.49.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH rtw-next v3 03/14] wifi: rtw89: Make hfc_param_ini in rtw89_chip_info an array
2025-06-20 18:51 [PATCH rtw-next v3 00/14] wifi: rtw89: Add support for USB devices Bitterblue Smith
2025-06-20 18:53 ` [PATCH rtw-next v3 01/14] wifi: rtw89: 8851b: Accept USB devices and load their MAC address Bitterblue Smith
2025-06-20 18:54 ` [PATCH rtw-next v3 02/14] wifi: rtw89: Make dle_mem in rtw89_chip_info an array Bitterblue Smith
@ 2025-06-20 18:56 ` Bitterblue Smith
2025-06-24 5:45 ` Ping-Ke Shih
2025-06-20 18:56 ` [PATCH rtw-next v3 04/14] wifi: rtw89: Add rtw8851b_dle_mem_usb{2,3} Bitterblue Smith
` (10 subsequent siblings)
13 siblings, 1 reply; 22+ messages in thread
From: Bitterblue Smith @ 2025-06-20 18:56 UTC (permalink / raw)
To: linux-wireless@vger.kernel.org; +Cc: Ping-Ke Shih
USB and SDIO will need different sets of values, so make hfc_param_ini
in struct rtw89_chip_info an array.
Also make param_ini a pointer instead of copying the struct.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
---
v2:
- Make hfc_param_ini an array instead of having (eventually) three
different hfc_param_ini_* members.
v3:
- Add null check for rtwdev->chip->hfc_param_ini[rtwdev->hci.type].
- Make param_ini a pointer instead of copying the struct.
---
drivers/net/wireless/realtek/rtw89/core.h | 4 ++-
drivers/net/wireless/realtek/rtw89/mac.c | 29 +++++++++----------
drivers/net/wireless/realtek/rtw89/rtw8851b.c | 2 +-
drivers/net/wireless/realtek/rtw89/rtw8852a.c | 2 +-
drivers/net/wireless/realtek/rtw89/rtw8852b.c | 2 +-
.../net/wireless/realtek/rtw89/rtw8852bt.c | 2 +-
drivers/net/wireless/realtek/rtw89/rtw8852c.c | 2 +-
drivers/net/wireless/realtek/rtw89/rtw8922a.c | 2 +-
8 files changed, 23 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/core.h b/drivers/net/wireless/realtek/rtw89/core.h
index 46d3512afb57..cab28dc10b4e 100644
--- a/drivers/net/wireless/realtek/rtw89/core.h
+++ b/drivers/net/wireless/realtek/rtw89/core.h
@@ -130,6 +130,8 @@ enum rtw89_hci_type {
RTW89_HCI_TYPE_PCIE,
RTW89_HCI_TYPE_USB,
RTW89_HCI_TYPE_SDIO,
+
+ RTW89_HCI_TYPE_NUM,
};
enum rtw89_hci_dle_type {
@@ -4355,7 +4357,7 @@ struct rtw89_chip_info {
u16 max_amsdu_limit;
bool dis_2g_40m_ul_ofdma;
u32 rsvd_ple_ofst;
- const struct rtw89_hfc_param_ini *hfc_param_ini;
+ const struct rtw89_hfc_param_ini *hfc_param_ini[RTW89_HCI_TYPE_NUM];
const struct rtw89_dle_mem *dle_mem[RTW89_HCI_DLE_TYPE_NUM];
u8 wde_qempty_acq_grpnum;
u8 wde_qempty_mgq_grpsel;
diff --git a/drivers/net/wireless/realtek/rtw89/mac.c b/drivers/net/wireless/realtek/rtw89/mac.c
index 7d3e6448423a..d3814012a02e 100644
--- a/drivers/net/wireless/realtek/rtw89/mac.c
+++ b/drivers/net/wireless/realtek/rtw89/mac.c
@@ -875,31 +875,30 @@ EXPORT_SYMBOL(rtw89_mac_set_err_status);
static int hfc_reset_param(struct rtw89_dev *rtwdev)
{
+ const struct rtw89_hfc_param_ini *param_ini, *param_inis;
struct rtw89_hfc_param *param = &rtwdev->mac.hfc_param;
- struct rtw89_hfc_param_ini param_ini = {NULL};
u8 qta_mode = rtwdev->mac.dle_info.qta_mode;
- switch (rtwdev->hci.type) {
- case RTW89_HCI_TYPE_PCIE:
- param_ini = rtwdev->chip->hfc_param_ini[qta_mode];
- param->en = 0;
- break;
- default:
+ param_inis = rtwdev->chip->hfc_param_ini[rtwdev->hci.type];
+ if (!param_inis)
return -EINVAL;
- }
- if (param_ini.pub_cfg)
- param->pub_cfg = *param_ini.pub_cfg;
+ param_ini = ¶m_inis[qta_mode];
+
+ param->en = 0;
+
+ if (param_ini->pub_cfg)
+ param->pub_cfg = *param_ini->pub_cfg;
- if (param_ini.prec_cfg)
- param->prec_cfg = *param_ini.prec_cfg;
+ if (param_ini->prec_cfg)
+ param->prec_cfg = *param_ini->prec_cfg;
- if (param_ini.ch_cfg)
- param->ch_cfg = param_ini.ch_cfg;
+ if (param_ini->ch_cfg)
+ param->ch_cfg = param_ini->ch_cfg;
memset(¶m->ch_info, 0, sizeof(param->ch_info));
memset(¶m->pub_info, 0, sizeof(param->pub_info));
- param->mode = param_ini.mode;
+ param->mode = param_ini->mode;
return 0;
}
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8851b.c b/drivers/net/wireless/realtek/rtw89/rtw8851b.c
index bd777b0c3f4d..7872c58c37ec 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8851b.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8851b.c
@@ -2465,7 +2465,7 @@ const struct rtw89_chip_info rtw8851b_chip_info = {
.max_amsdu_limit = 3500,
.dis_2g_40m_ul_ofdma = true,
.rsvd_ple_ofst = 0x2f800,
- .hfc_param_ini = rtw8851b_hfc_param_ini_pcie,
+ .hfc_param_ini = {rtw8851b_hfc_param_ini_pcie, NULL, NULL},
.dle_mem = {rtw8851b_dle_mem_pcie, NULL, NULL, NULL},
.wde_qempty_acq_grpnum = 4,
.wde_qempty_mgq_grpsel = 4,
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8852a.c b/drivers/net/wireless/realtek/rtw89/rtw8852a.c
index 13fbc3a1b49e..222d271771be 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8852a.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8852a.c
@@ -2184,7 +2184,7 @@ const struct rtw89_chip_info rtw8852a_chip_info = {
.max_amsdu_limit = 3500,
.dis_2g_40m_ul_ofdma = true,
.rsvd_ple_ofst = 0x6f800,
- .hfc_param_ini = rtw8852a_hfc_param_ini_pcie,
+ .hfc_param_ini = {rtw8852a_hfc_param_ini_pcie, NULL, NULL},
.dle_mem = {rtw8852a_dle_mem_pcie, NULL, NULL, NULL},
.wde_qempty_acq_grpnum = 16,
.wde_qempty_mgq_grpsel = 16,
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8852b.c b/drivers/net/wireless/realtek/rtw89/rtw8852b.c
index b2989cdcce34..ce2df199307f 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8852b.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8852b.c
@@ -820,7 +820,7 @@ const struct rtw89_chip_info rtw8852b_chip_info = {
.max_amsdu_limit = 5000,
.dis_2g_40m_ul_ofdma = true,
.rsvd_ple_ofst = 0x2f800,
- .hfc_param_ini = rtw8852b_hfc_param_ini_pcie,
+ .hfc_param_ini = {rtw8852b_hfc_param_ini_pcie, NULL, NULL},
.dle_mem = {rtw8852b_dle_mem_pcie, NULL, NULL, NULL},
.wde_qempty_acq_grpnum = 4,
.wde_qempty_mgq_grpsel = 4,
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8852bt.c b/drivers/net/wireless/realtek/rtw89/rtw8852bt.c
index 762a1fc005d2..8f79207bfcf0 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8852bt.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8852bt.c
@@ -754,7 +754,7 @@ const struct rtw89_chip_info rtw8852bt_chip_info = {
.max_amsdu_limit = 5000,
.dis_2g_40m_ul_ofdma = true,
.rsvd_ple_ofst = 0x6f800,
- .hfc_param_ini = rtw8852bt_hfc_param_ini_pcie,
+ .hfc_param_ini = {rtw8852bt_hfc_param_ini_pcie, NULL, NULL},
.dle_mem = {rtw8852bt_dle_mem_pcie, NULL, NULL, NULL},
.wde_qempty_acq_grpnum = 4,
.wde_qempty_mgq_grpsel = 4,
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8852c.c b/drivers/net/wireless/realtek/rtw89/rtw8852c.c
index c0d76d318b24..6f481f335484 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8852c.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8852c.c
@@ -3004,7 +3004,7 @@ const struct rtw89_chip_info rtw8852c_chip_info = {
.max_amsdu_limit = 8000,
.dis_2g_40m_ul_ofdma = false,
.rsvd_ple_ofst = 0x6f800,
- .hfc_param_ini = rtw8852c_hfc_param_ini_pcie,
+ .hfc_param_ini = {rtw8852c_hfc_param_ini_pcie, NULL, NULL},
.dle_mem = {rtw8852c_dle_mem_pcie, NULL, NULL, NULL},
.wde_qempty_acq_grpnum = 16,
.wde_qempty_mgq_grpsel = 16,
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8922a.c b/drivers/net/wireless/realtek/rtw89/rtw8922a.c
index 7854d6f30b6d..43efb6b4e9cb 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8922a.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8922a.c
@@ -2859,7 +2859,7 @@ const struct rtw89_chip_info rtw8922a_chip_info = {
.max_amsdu_limit = 8000,
.dis_2g_40m_ul_ofdma = false,
.rsvd_ple_ofst = 0x8f800,
- .hfc_param_ini = rtw8922a_hfc_param_ini_pcie,
+ .hfc_param_ini = {rtw8922a_hfc_param_ini_pcie, NULL, NULL},
.dle_mem = {rtw8922a_dle_mem_pcie, NULL, NULL, NULL},
.wde_qempty_acq_grpnum = 4,
.wde_qempty_mgq_grpsel = 4,
--
2.49.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH rtw-next v3 04/14] wifi: rtw89: Add rtw8851b_dle_mem_usb{2,3}
2025-06-20 18:51 [PATCH rtw-next v3 00/14] wifi: rtw89: Add support for USB devices Bitterblue Smith
` (2 preceding siblings ...)
2025-06-20 18:56 ` [PATCH rtw-next v3 03/14] wifi: rtw89: Make hfc_param_ini " Bitterblue Smith
@ 2025-06-20 18:56 ` Bitterblue Smith
2025-06-20 18:57 ` [PATCH rtw-next v3 05/14] wifi: rtw89: Add rtw8851b_hfc_param_ini_usb Bitterblue Smith
` (9 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Bitterblue Smith @ 2025-06-20 18:56 UTC (permalink / raw)
To: linux-wireless@vger.kernel.org; +Cc: Ping-Ke Shih
Add rtw8851b_dle_mem_usb2 and rtw8851b_dle_mem_usb3 and their various
quotas and sizes in struct rtw89_mac_size_set.
"dle" could be "Data Link Engine" or "Double Link Engine". These are
some parameters needed for RTL8851BU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
---
v2:
- Add space in comments before */
- Add more information in the commit message.
- Adapt to the changes in patch 2.
v3:
- Add Acked-by.
---
drivers/net/wireless/realtek/rtw89/mac.c | 15 +++++++++
drivers/net/wireless/realtek/rtw89/mac.h | 8 +++++
drivers/net/wireless/realtek/rtw89/rtw8851b.c | 31 ++++++++++++++++++-
3 files changed, 53 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtw89/mac.c b/drivers/net/wireless/realtek/rtw89/mac.c
index d3814012a02e..b281668c6c87 100644
--- a/drivers/net/wireless/realtek/rtw89/mac.c
+++ b/drivers/net/wireless/realtek/rtw89/mac.c
@@ -1645,6 +1645,8 @@ const struct rtw89_mac_size_set rtw89_mac_size = {
/* 8852C PCIE SCC */
.wde_size19 = {RTW89_WDE_PG_64, 3328, 0,},
.wde_size23 = {RTW89_WDE_PG_64, 1022, 2,},
+ /* 8852B USB2.0/USB3.0 SCC */
+ .wde_size25 = {RTW89_WDE_PG_64, 162, 94,},
/* PCIE */
.ple_size0 = {RTW89_PLE_PG_128, 1520, 16,},
.ple_size0_v1 = {RTW89_PLE_PG_128, 2688, 240, 212992,},
@@ -1660,6 +1662,10 @@ const struct rtw89_mac_size_set rtw89_mac_size = {
.ple_size18 = {RTW89_PLE_PG_128, 2544, 16,},
/* 8852C PCIE SCC */
.ple_size19 = {RTW89_PLE_PG_128, 1904, 16,},
+ /* 8852B USB2.0 SCC */
+ .ple_size32 = {RTW89_PLE_PG_128, 620, 20,},
+ /* 8852B USB3.0 SCC */
+ .ple_size33 = {RTW89_PLE_PG_128, 632, 8,},
/* PCIE 64 */
.wde_qt0 = {3792, 196, 0, 107,},
.wde_qt0_v1 = {3302, 6, 0, 20,},
@@ -1674,6 +1680,8 @@ const struct rtw89_mac_size_set rtw89_mac_size = {
/* 8852C PCIE SCC */
.wde_qt18 = {3228, 60, 0, 40,},
.wde_qt23 = {958, 48, 0, 16,},
+ /* 8852B USB2.0/USB3.0 SCC */
+ .wde_qt25 = {152, 2, 0, 8,},
.ple_qt0 = {320, 320, 32, 16, 13, 13, 292, 292, 64, 18, 1, 4, 0,},
.ple_qt1 = {320, 320, 32, 16, 1316, 1316, 1595, 1595, 1367, 1321, 1, 1307, 0,},
/* PCIE SCC */
@@ -1697,6 +1705,13 @@ const struct rtw89_mac_size_set rtw89_mac_size = {
/* PCIE 64 */
.ple_qt58 = {147, 0, 16, 20, 157, 13, 229, 0, 172, 14, 24, 0,},
.ple_qt59 = {147, 0, 32, 20, 1860, 13, 2025, 0, 1879, 14, 24, 0,},
+ /* USB2.0 52B SCC */
+ .ple_qt72 = {130, 0, 16, 48, 4, 13, 322, 0, 32, 14, 8, 0, 0,},
+ /* USB2.0 52B 92K */
+ .ple_qt73 = {130, 0, 32, 48, 37, 13, 355, 0, 65, 14, 24, 0, 0,},
+ /* USB3.0 52B 92K */
+ .ple_qt74 = {286, 0, 16, 48, 4, 13, 178, 0, 32, 14, 8, 0, 0,},
+ .ple_qt75 = {286, 0, 32, 48, 37, 13, 211, 0, 65, 14, 24, 0, 0,},
/* 8852A PCIE WOW */
.ple_qt_52a_wow = {264, 0, 32, 20, 64, 13, 1005, 0, 64, 128, 120,},
/* 8852B PCIE WOW */
diff --git a/drivers/net/wireless/realtek/rtw89/mac.h b/drivers/net/wireless/realtek/rtw89/mac.h
index c1cbc53b16a7..50deea693447 100644
--- a/drivers/net/wireless/realtek/rtw89/mac.h
+++ b/drivers/net/wireless/realtek/rtw89/mac.h
@@ -922,6 +922,7 @@ struct rtw89_mac_size_set {
const struct rtw89_dle_size wde_size18;
const struct rtw89_dle_size wde_size19;
const struct rtw89_dle_size wde_size23;
+ const struct rtw89_dle_size wde_size25;
const struct rtw89_dle_size ple_size0;
const struct rtw89_dle_size ple_size0_v1;
const struct rtw89_dle_size ple_size3_v1;
@@ -931,6 +932,8 @@ struct rtw89_mac_size_set {
const struct rtw89_dle_size ple_size9;
const struct rtw89_dle_size ple_size18;
const struct rtw89_dle_size ple_size19;
+ const struct rtw89_dle_size ple_size32;
+ const struct rtw89_dle_size ple_size33;
const struct rtw89_wde_quota wde_qt0;
const struct rtw89_wde_quota wde_qt0_v1;
const struct rtw89_wde_quota wde_qt4;
@@ -939,6 +942,7 @@ struct rtw89_mac_size_set {
const struct rtw89_wde_quota wde_qt17;
const struct rtw89_wde_quota wde_qt18;
const struct rtw89_wde_quota wde_qt23;
+ const struct rtw89_wde_quota wde_qt25;
const struct rtw89_ple_quota ple_qt0;
const struct rtw89_ple_quota ple_qt1;
const struct rtw89_ple_quota ple_qt4;
@@ -953,6 +957,10 @@ struct rtw89_mac_size_set {
const struct rtw89_ple_quota ple_qt57;
const struct rtw89_ple_quota ple_qt58;
const struct rtw89_ple_quota ple_qt59;
+ const struct rtw89_ple_quota ple_qt72;
+ const struct rtw89_ple_quota ple_qt73;
+ const struct rtw89_ple_quota ple_qt74;
+ const struct rtw89_ple_quota ple_qt75;
const struct rtw89_ple_quota ple_qt_52a_wow;
const struct rtw89_ple_quota ple_qt_52b_wow;
const struct rtw89_ple_quota ple_qt_52bt_wow;
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8851b.c b/drivers/net/wireless/realtek/rtw89/rtw8851b.c
index 7872c58c37ec..55703de9920a 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8851b.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8851b.c
@@ -68,6 +68,32 @@ static const struct rtw89_dle_mem rtw8851b_dle_mem_pcie[] = {
NULL},
};
+static const struct rtw89_dle_mem rtw8851b_dle_mem_usb2[] = {
+ [RTW89_QTA_SCC] = {RTW89_QTA_SCC, &rtw89_mac_size.wde_size25,
+ &rtw89_mac_size.ple_size32, &rtw89_mac_size.wde_qt25,
+ &rtw89_mac_size.wde_qt25, &rtw89_mac_size.ple_qt72,
+ &rtw89_mac_size.ple_qt73},
+ [RTW89_QTA_DLFW] = {RTW89_QTA_DLFW, &rtw89_mac_size.wde_size9,
+ &rtw89_mac_size.ple_size8, &rtw89_mac_size.wde_qt4,
+ &rtw89_mac_size.wde_qt4, &rtw89_mac_size.ple_qt13,
+ &rtw89_mac_size.ple_qt13},
+ [RTW89_QTA_INVALID] = {RTW89_QTA_INVALID, NULL, NULL, NULL, NULL, NULL,
+ NULL},
+};
+
+static const struct rtw89_dle_mem rtw8851b_dle_mem_usb3[] = {
+ [RTW89_QTA_SCC] = {RTW89_QTA_SCC, &rtw89_mac_size.wde_size25,
+ &rtw89_mac_size.ple_size33, &rtw89_mac_size.wde_qt25,
+ &rtw89_mac_size.wde_qt25, &rtw89_mac_size.ple_qt74,
+ &rtw89_mac_size.ple_qt75},
+ [RTW89_QTA_DLFW] = {RTW89_QTA_DLFW, &rtw89_mac_size.wde_size9,
+ &rtw89_mac_size.ple_size8, &rtw89_mac_size.wde_qt4,
+ &rtw89_mac_size.wde_qt4, &rtw89_mac_size.ple_qt13,
+ &rtw89_mac_size.ple_qt13},
+ [RTW89_QTA_INVALID] = {RTW89_QTA_INVALID, NULL, NULL, NULL, NULL, NULL,
+ NULL},
+};
+
static const struct rtw89_reg3_def rtw8851b_btc_preagc_en_defs[] = {
{0x46D0, GENMASK(1, 0), 0x3},
{0x4AD4, GENMASK(31, 0), 0xf},
@@ -2466,7 +2492,10 @@ const struct rtw89_chip_info rtw8851b_chip_info = {
.dis_2g_40m_ul_ofdma = true,
.rsvd_ple_ofst = 0x2f800,
.hfc_param_ini = {rtw8851b_hfc_param_ini_pcie, NULL, NULL},
- .dle_mem = {rtw8851b_dle_mem_pcie, NULL, NULL, NULL},
+ .dle_mem = {rtw8851b_dle_mem_pcie,
+ rtw8851b_dle_mem_usb2,
+ rtw8851b_dle_mem_usb3,
+ NULL},
.wde_qempty_acq_grpnum = 4,
.wde_qempty_mgq_grpsel = 4,
.rf_base_addr = {0xe000},
--
2.49.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH rtw-next v3 05/14] wifi: rtw89: Add rtw8851b_hfc_param_ini_usb
2025-06-20 18:51 [PATCH rtw-next v3 00/14] wifi: rtw89: Add support for USB devices Bitterblue Smith
` (3 preceding siblings ...)
2025-06-20 18:56 ` [PATCH rtw-next v3 04/14] wifi: rtw89: Add rtw8851b_dle_mem_usb{2,3} Bitterblue Smith
@ 2025-06-20 18:57 ` Bitterblue Smith
2025-06-20 18:58 ` [PATCH rtw-next v3 06/14] wifi: rtw89: Disable deep power saving for USB/SDIO Bitterblue Smith
` (8 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Bitterblue Smith @ 2025-06-20 18:57 UTC (permalink / raw)
To: linux-wireless@vger.kernel.org; +Cc: Ping-Ke Shih
"hfc" means "hci fc" which is "Host Control Interface Flow Control".
These are some parameters needed for RTL8851BU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
---
v2:
- Adapt to the changes in patch 3.
- Add more information in the commit message.
v3:
- Add Acked-by.
- Adjust the wording of the commit message.
---
drivers/net/wireless/realtek/rtw89/rtw8851b.c | 46 ++++++++++++++++++-
1 file changed, 45 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8851b.c b/drivers/net/wireless/realtek/rtw89/rtw8851b.c
index 55703de9920a..e6ca3b045fc2 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8851b.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8851b.c
@@ -51,6 +51,48 @@ static const struct rtw89_hfc_param_ini rtw8851b_hfc_param_ini_pcie[] = {
[RTW89_QTA_INVALID] = {NULL},
};
+static const struct rtw89_hfc_ch_cfg rtw8851b_hfc_chcfg_usb[] = {
+ {18, 152, grp_0}, /* ACH 0 */
+ {18, 152, grp_0}, /* ACH 1 */
+ {18, 152, grp_0}, /* ACH 2 */
+ {18, 152, grp_0}, /* ACH 3 */
+ {0, 0, grp_0}, /* ACH 4 */
+ {0, 0, grp_0}, /* ACH 5 */
+ {0, 0, grp_0}, /* ACH 6 */
+ {0, 0, grp_0}, /* ACH 7 */
+ {18, 152, grp_0}, /* B0MGQ */
+ {18, 152, grp_0}, /* B0HIQ */
+ {0, 0, grp_0}, /* B1MGQ */
+ {0, 0, grp_0}, /* B1HIQ */
+ {0, 0, 0} /* FWCMDQ */
+};
+
+static const struct rtw89_hfc_pub_cfg rtw8851b_hfc_pubcfg_usb = {
+ 152, /* Group 0 */
+ 0, /* Group 1 */
+ 152, /* Public Max */
+ 0 /* WP threshold */
+};
+
+static const struct rtw89_hfc_prec_cfg rtw8851b_hfc_preccfg_usb = {
+ 9, /* CH 0-11 pre-cost */
+ 32, /* H2C pre-cost */
+ 64, /* WP CH 0-7 pre-cost */
+ 24, /* WP CH 8-11 pre-cost */
+ 1, /* CH 0-11 full condition */
+ 1, /* H2C full condition */
+ 1, /* WP CH 0-7 full condition */
+ 1, /* WP CH 8-11 full condition */
+};
+
+static const struct rtw89_hfc_param_ini rtw8851b_hfc_param_ini_usb[] = {
+ [RTW89_QTA_SCC] = {rtw8851b_hfc_chcfg_usb, &rtw8851b_hfc_pubcfg_usb,
+ &rtw8851b_hfc_preccfg_usb, RTW89_HCIFC_STF},
+ [RTW89_QTA_DLFW] = {NULL, NULL,
+ &rtw8851b_hfc_preccfg_usb, RTW89_HCIFC_STF},
+ [RTW89_QTA_INVALID] = {NULL},
+};
+
static const struct rtw89_dle_mem rtw8851b_dle_mem_pcie[] = {
[RTW89_QTA_SCC] = {RTW89_QTA_SCC, &rtw89_mac_size.wde_size6,
&rtw89_mac_size.ple_size6, &rtw89_mac_size.wde_qt6,
@@ -2491,7 +2533,9 @@ const struct rtw89_chip_info rtw8851b_chip_info = {
.max_amsdu_limit = 3500,
.dis_2g_40m_ul_ofdma = true,
.rsvd_ple_ofst = 0x2f800,
- .hfc_param_ini = {rtw8851b_hfc_param_ini_pcie, NULL, NULL},
+ .hfc_param_ini = {rtw8851b_hfc_param_ini_pcie,
+ rtw8851b_hfc_param_ini_usb,
+ NULL},
.dle_mem = {rtw8851b_dle_mem_pcie,
rtw8851b_dle_mem_usb2,
rtw8851b_dle_mem_usb3,
--
2.49.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH rtw-next v3 06/14] wifi: rtw89: Disable deep power saving for USB/SDIO
2025-06-20 18:51 [PATCH rtw-next v3 00/14] wifi: rtw89: Add support for USB devices Bitterblue Smith
` (4 preceding siblings ...)
2025-06-20 18:57 ` [PATCH rtw-next v3 05/14] wifi: rtw89: Add rtw8851b_hfc_param_ini_usb Bitterblue Smith
@ 2025-06-20 18:58 ` Bitterblue Smith
2025-06-24 5:50 ` Ping-Ke Shih
2025-06-20 18:59 ` [PATCH rtw-next v3 07/14] wifi: rtw89: Add extra TX headroom for USB Bitterblue Smith
` (7 subsequent siblings)
13 siblings, 1 reply; 22+ messages in thread
From: Bitterblue Smith @ 2025-06-20 18:58 UTC (permalink / raw)
To: linux-wireless@vger.kernel.org; +Cc: Ping-Ke Shih
Disable deep power saving for USB and SDIO because rtw89_mac_send_rpwm()
is called in atomic context and accessing hardware registers results in
"scheduling while atomic" errors.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
---
v2:
- Disable deep power saving for SDIO also.
- Don't disable rtw89_ps_power_mode_change() for USB/SDIO.
- Disable rtw89_mac_power_mode_change() for USB/SDIO.
- Call rtw89_ps_power_mode_change_with_hci() only for PCI and call
rtw89_mac_power_mode_change() for USB/SDIO.
- Update the commit message.
v3:
- Disable deep ps from rtw89_update_ps_mode() because it's simpler.
- Leave rtw89_ps_power_mode_change_with_hci() for later.
- Update the commit message.
---
drivers/net/wireless/realtek/rtw89/core.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
index 4026cda04ef6..bc7af6117709 100644
--- a/drivers/net/wireless/realtek/rtw89/core.c
+++ b/drivers/net/wireless/realtek/rtw89/core.c
@@ -2871,6 +2871,9 @@ static enum rtw89_ps_mode rtw89_update_ps_mode(struct rtw89_dev *rtwdev)
{
const struct rtw89_chip_info *chip = rtwdev->chip;
+ if (rtwdev->hci.type != RTW89_HCI_TYPE_PCIE)
+ return RTW89_PS_MODE_NONE;
+
if (rtw89_disable_ps_mode || !chip->ps_mode_supported ||
RTW89_CHK_FW_FEATURE(NO_DEEP_PS, &rtwdev->fw))
return RTW89_PS_MODE_NONE;
--
2.49.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH rtw-next v3 07/14] wifi: rtw89: Add extra TX headroom for USB
2025-06-20 18:51 [PATCH rtw-next v3 00/14] wifi: rtw89: Add support for USB devices Bitterblue Smith
` (5 preceding siblings ...)
2025-06-20 18:58 ` [PATCH rtw-next v3 06/14] wifi: rtw89: Disable deep power saving for USB/SDIO Bitterblue Smith
@ 2025-06-20 18:59 ` Bitterblue Smith
2025-06-20 19:00 ` [PATCH rtw-next v3 08/14] wifi: rtw89: Hide some errors when the device is unplugged Bitterblue Smith
` (6 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Bitterblue Smith @ 2025-06-20 18:59 UTC (permalink / raw)
To: linux-wireless@vger.kernel.org; +Cc: Ping-Ke Shih
In the case of USB the TX descriptor is transmitted in the same buffer
as the 802.11 frame, so add the required headroom.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
---
v2:
- Add Acked-by.
v3:
- No change.
---
drivers/net/wireless/realtek/rtw89/core.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
index bc7af6117709..3e53b1f1a35f 100644
--- a/drivers/net/wireless/realtek/rtw89/core.c
+++ b/drivers/net/wireless/realtek/rtw89/core.c
@@ -5578,6 +5578,9 @@ static int rtw89_core_register_hw(struct rtw89_dev *rtwdev)
int ret;
int tx_headroom = IEEE80211_HT_CTL_LEN;
+ if (rtwdev->hci.type == RTW89_HCI_TYPE_USB)
+ tx_headroom += chip->txwd_body_size + chip->txwd_info_size;
+
hw->vif_data_size = struct_size_t(struct rtw89_vif, links_inst, n);
hw->sta_data_size = struct_size_t(struct rtw89_sta, links_inst, n);
hw->txq_data_size = sizeof(struct rtw89_txq);
--
2.49.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH rtw-next v3 08/14] wifi: rtw89: Hide some errors when the device is unplugged
2025-06-20 18:51 [PATCH rtw-next v3 00/14] wifi: rtw89: Add support for USB devices Bitterblue Smith
` (6 preceding siblings ...)
2025-06-20 18:59 ` [PATCH rtw-next v3 07/14] wifi: rtw89: Add extra TX headroom for USB Bitterblue Smith
@ 2025-06-20 19:00 ` Bitterblue Smith
2025-06-20 19:01 ` [PATCH rtw-next v3 09/14] wifi: rtw89: 8851b: Modify rtw8851b_pwr_{on,off}_func() for USB Bitterblue Smith
` (5 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Bitterblue Smith @ 2025-06-20 19:00 UTC (permalink / raw)
To: linux-wireless@vger.kernel.org; +Cc: Ping-Ke Shih
A few unnecessary error messages are printed when the device is
unplugged. "read swsi busy" in particular can appear ~1000 times when
RTL8851BU is unplugged.
Add a new flag RTW89_FLAG_UNPLUGGED and print some error messages only
when this flag is not set. The new USB driver will set the flag when
the device is unplugged.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
---
v2:
- Add Acked-by.
v3:
- No change.
---
drivers/net/wireless/realtek/rtw89/core.h | 1 +
drivers/net/wireless/realtek/rtw89/mac.c | 13 ++++++++-----
drivers/net/wireless/realtek/rtw89/phy.c | 3 ++-
3 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/core.h b/drivers/net/wireless/realtek/rtw89/core.h
index cab28dc10b4e..763f7ba76084 100644
--- a/drivers/net/wireless/realtek/rtw89/core.h
+++ b/drivers/net/wireless/realtek/rtw89/core.h
@@ -4983,6 +4983,7 @@ enum rtw89_flags {
RTW89_FLAG_FORBIDDEN_TRACK_WORK,
RTW89_FLAG_CHANGING_INTERFACE,
RTW89_FLAG_HW_RFKILL_STATE,
+ RTW89_FLAG_UNPLUGGED,
NUM_OF_RTW89_FLAGS,
};
diff --git a/drivers/net/wireless/realtek/rtw89/mac.c b/drivers/net/wireless/realtek/rtw89/mac.c
index b281668c6c87..c018071c94ee 100644
--- a/drivers/net/wireless/realtek/rtw89/mac.c
+++ b/drivers/net/wireless/realtek/rtw89/mac.c
@@ -88,7 +88,7 @@ int rtw89_mac_write_lte(struct rtw89_dev *rtwdev, const u32 offset, u32 val)
ret = read_poll_timeout(rtw89_read8, lte_ctrl, (lte_ctrl & BIT(5)) != 0,
50, 50000, false, rtwdev, R_AX_LTE_CTRL + 3);
- if (ret)
+ if (ret && !test_bit(RTW89_FLAG_UNPLUGGED, rtwdev->flags))
rtw89_err(rtwdev, "[ERR]lte not ready(W)\n");
rtw89_write32(rtwdev, R_AX_LTE_WDATA, val);
@@ -104,7 +104,7 @@ int rtw89_mac_read_lte(struct rtw89_dev *rtwdev, const u32 offset, u32 *val)
ret = read_poll_timeout(rtw89_read8, lte_ctrl, (lte_ctrl & BIT(5)) != 0,
50, 50000, false, rtwdev, R_AX_LTE_CTRL + 3);
- if (ret)
+ if (ret && !test_bit(RTW89_FLAG_UNPLUGGED, rtwdev->flags))
rtw89_err(rtwdev, "[ERR]lte not ready(W)\n");
rtw89_write32(rtwdev, R_AX_LTE_CTRL, 0x800F0000 | offset);
@@ -5922,13 +5922,15 @@ int rtw89_mac_coex_init(struct rtw89_dev *rtwdev, const struct rtw89_mac_ax_coex
ret = rtw89_mac_read_lte(rtwdev, R_AX_LTE_SW_CFG_2, &val32);
if (ret) {
- rtw89_err(rtwdev, "Read R_AX_LTE_SW_CFG_2 fail!\n");
+ if (!test_bit(RTW89_FLAG_UNPLUGGED, rtwdev->flags))
+ rtw89_err(rtwdev, "Read R_AX_LTE_SW_CFG_2 fail!\n");
return ret;
}
val32 = val32 & B_AX_WL_RX_CTRL;
ret = rtw89_mac_write_lte(rtwdev, R_AX_LTE_SW_CFG_2, val32);
if (ret) {
- rtw89_err(rtwdev, "Write R_AX_LTE_SW_CFG_2 fail!\n");
+ if (!test_bit(RTW89_FLAG_UNPLUGGED, rtwdev->flags))
+ rtw89_err(rtwdev, "Write R_AX_LTE_SW_CFG_2 fail!\n");
return ret;
}
@@ -6052,7 +6054,8 @@ int rtw89_mac_cfg_gnt(struct rtw89_dev *rtwdev,
ret = rtw89_mac_write_lte(rtwdev, R_AX_LTE_SW_CFG_1, val);
if (ret) {
- rtw89_err(rtwdev, "Write LTE fail!\n");
+ if (!test_bit(RTW89_FLAG_UNPLUGGED, rtwdev->flags))
+ rtw89_err(rtwdev, "Write LTE fail!\n");
return ret;
}
diff --git a/drivers/net/wireless/realtek/rtw89/phy.c b/drivers/net/wireless/realtek/rtw89/phy.c
index a05841304e0e..46e2b3bbb313 100644
--- a/drivers/net/wireless/realtek/rtw89/phy.c
+++ b/drivers/net/wireless/realtek/rtw89/phy.c
@@ -897,7 +897,8 @@ static u32 rtw89_phy_read_rf_a(struct rtw89_dev *rtwdev,
30, false, rtwdev, R_SWSI_V1,
B_SWSI_R_DATA_DONE_V1);
if (ret) {
- rtw89_err(rtwdev, "read swsi busy\n");
+ if (!test_bit(RTW89_FLAG_UNPLUGGED, rtwdev->flags))
+ rtw89_err(rtwdev, "read swsi busy\n");
return INV_RF_DATA;
}
--
2.49.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH rtw-next v3 09/14] wifi: rtw89: 8851b: Modify rtw8851b_pwr_{on,off}_func() for USB
2025-06-20 18:51 [PATCH rtw-next v3 00/14] wifi: rtw89: Add support for USB devices Bitterblue Smith
` (7 preceding siblings ...)
2025-06-20 19:00 ` [PATCH rtw-next v3 08/14] wifi: rtw89: Hide some errors when the device is unplugged Bitterblue Smith
@ 2025-06-20 19:01 ` Bitterblue Smith
2025-06-24 5:51 ` Ping-Ke Shih
2025-06-20 19:02 ` [PATCH rtw-next v3 10/14] wifi: rtw89: Fix rtw89_mac_power_switch() " Bitterblue Smith
` (4 subsequent siblings)
13 siblings, 1 reply; 22+ messages in thread
From: Bitterblue Smith @ 2025-06-20 19:01 UTC (permalink / raw)
To: linux-wireless@vger.kernel.org; +Cc: Ping-Ke Shih
There are a few differences in the power on/off functions between PCIE
and USB.
While the RTL8851BU appears to work without these changes, it's
probably best to implement them, in case they are needed in some
situations.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
---
v2:
- Patch is new in v2.
v3:
- Add B_AX_SOP_EDSWR to reg.h, which was accidentally missing in v2.
---
drivers/net/wireless/realtek/rtw89/reg.h | 1 +
drivers/net/wireless/realtek/rtw89/rtw8851b.c | 22 ++++++++++++++-----
2 files changed, 18 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/reg.h b/drivers/net/wireless/realtek/rtw89/reg.h
index 4a65b0c9c2d1..c680441232fb 100644
--- a/drivers/net/wireless/realtek/rtw89/reg.h
+++ b/drivers/net/wireless/realtek/rtw89/reg.h
@@ -21,6 +21,7 @@
#define R_AX_SYS_PW_CTRL 0x0004
#define B_AX_SOP_ASWRM BIT(31)
#define B_AX_SOP_PWMM_DSWR BIT(29)
+#define B_AX_SOP_EDSWR BIT(28)
#define B_AX_XTAL_OFF_A_DIE BIT(22)
#define B_AX_DIS_WLBT_PDNSUSEN_SOPC BIT(18)
#define B_AX_RDY_SYSPWR BIT(17)
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8851b.c b/drivers/net/wireless/realtek/rtw89/rtw8851b.c
index e6ca3b045fc2..30fa64f02e94 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8851b.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8851b.c
@@ -385,7 +385,8 @@ static int rtw8851b_pwr_on_func(struct rtw89_dev *rtwdev)
rtw89_write8_clr(rtwdev, R_AX_PLATFORM_ENABLE, B_AX_PLATFORM_EN);
rtw89_write8_set(rtwdev, R_AX_PLATFORM_ENABLE, B_AX_PLATFORM_EN);
- rtw89_write32_clr(rtwdev, R_AX_SYS_SDIO_CTRL, B_AX_PCIE_CALIB_EN_V1);
+ if (rtwdev->hci.type == RTW89_HCI_TYPE_PCIE)
+ rtw89_write32_clr(rtwdev, R_AX_SYS_SDIO_CTRL, B_AX_PCIE_CALIB_EN_V1);
ret = rtw89_mac_write_xtal_si(rtwdev, XTAL_SI_ANAPAR_WL, XTAL_SI_OFF_WEI,
XTAL_SI_OFF_WEI);
@@ -430,8 +431,9 @@ static int rtw8851b_pwr_on_func(struct rtw89_dev *rtwdev)
rtw89_write32_clr(rtwdev, R_AX_SYS_ISO_CTRL, B_AX_PWC_EV2EF_B14);
rtw89_write32_clr(rtwdev, R_AX_PMC_DBG_CTRL2, B_AX_SYSON_DIS_PMCR_AX_WRMSK);
- rtw89_write32_set(rtwdev, R_AX_GPIO0_16_EECS_EESK_LED1_PULL_LOW_EN,
- B_AX_GPIO10_PULL_LOW_EN | B_AX_GPIO16_PULL_LOW_EN_V1);
+ if (rtwdev->hci.type == RTW89_HCI_TYPE_PCIE)
+ rtw89_write32_set(rtwdev, R_AX_GPIO0_16_EECS_EESK_LED1_PULL_LOW_EN,
+ B_AX_GPIO10_PULL_LOW_EN | B_AX_GPIO16_PULL_LOW_EN_V1);
if (rtwdev->hal.cv == CHIP_CAV) {
ret = rtw89_read_efuse_ver(rtwdev, &val8);
@@ -515,7 +517,10 @@ static int rtw8851b_pwr_off_func(struct rtw89_dev *rtwdev)
if (ret)
return ret;
- rtw89_write32(rtwdev, R_AX_WLLPS_CTRL, SW_LPS_OPTION);
+ if (rtwdev->hci.type == RTW89_HCI_TYPE_PCIE)
+ rtw89_write32(rtwdev, R_AX_WLLPS_CTRL, SW_LPS_OPTION);
+ else if (rtwdev->hci.type == RTW89_HCI_TYPE_USB)
+ rtw89_write32_clr(rtwdev, R_AX_SYS_PW_CTRL, B_AX_SOP_EDSWR);
if (rtwdev->hal.cv == CHIP_CAV) {
rtw8851b_patch_swr_pfm2pwm(rtwdev);
@@ -524,7 +529,14 @@ static int rtw8851b_pwr_off_func(struct rtw89_dev *rtwdev)
rtw89_write32_set(rtwdev, R_AX_SPSANA_ON_CTRL1, B_AX_FPWMDELAY);
}
- rtw89_write32_set(rtwdev, R_AX_SYS_PW_CTRL, B_AX_APFM_SWLPS);
+ if (rtwdev->hci.type == RTW89_HCI_TYPE_PCIE) {
+ rtw89_write32_set(rtwdev, R_AX_SYS_PW_CTRL, B_AX_APFM_SWLPS);
+ } else if (rtwdev->hci.type == RTW89_HCI_TYPE_USB) {
+ val32 = rtw89_read32(rtwdev, R_AX_SYS_PW_CTRL);
+ val32 &= ~B_AX_AFSM_PCIE_SUS_EN;
+ val32 |= B_AX_AFSM_WLSUS_EN;
+ rtw89_write32(rtwdev, R_AX_SYS_PW_CTRL, val32);
+ }
return 0;
}
--
2.49.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH rtw-next v3 10/14] wifi: rtw89: Fix rtw89_mac_power_switch() for USB
2025-06-20 18:51 [PATCH rtw-next v3 00/14] wifi: rtw89: Add support for USB devices Bitterblue Smith
` (8 preceding siblings ...)
2025-06-20 19:01 ` [PATCH rtw-next v3 09/14] wifi: rtw89: 8851b: Modify rtw8851b_pwr_{on,off}_func() for USB Bitterblue Smith
@ 2025-06-20 19:02 ` Bitterblue Smith
2025-06-24 5:52 ` Ping-Ke Shih
2025-06-20 19:03 ` [PATCH rtw-next v3 11/14] wifi: rtw89: Add some definitions " Bitterblue Smith
` (3 subsequent siblings)
13 siblings, 1 reply; 22+ messages in thread
From: Bitterblue Smith @ 2025-06-20 19:02 UTC (permalink / raw)
To: linux-wireless@vger.kernel.org; +Cc: Ping-Ke Shih
Clear some bits in some registers in order to allow RTL8851BU to power
on. This is done both when powering on and when powering off because
that's what the vendor driver does.
Also tested with RTL8832BU and RTL8832CU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
---
v2:
- Put the new code in a function.
v3:
- Delete empty line.
- Add more information to the commit message.
---
drivers/net/wireless/realtek/rtw89/mac.c | 19 +++++++++++++++++++
drivers/net/wireless/realtek/rtw89/reg.h | 1 +
2 files changed, 20 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw89/mac.c b/drivers/net/wireless/realtek/rtw89/mac.c
index c018071c94ee..96c54d1c658e 100644
--- a/drivers/net/wireless/realtek/rtw89/mac.c
+++ b/drivers/net/wireless/realtek/rtw89/mac.c
@@ -1440,6 +1440,23 @@ void rtw89_mac_notify_wake(struct rtw89_dev *rtwdev)
rtw89_mac_send_rpwm(rtwdev, state, true);
}
+static void rtw89_mac_power_switch_boot_mode(struct rtw89_dev *rtwdev)
+{
+ u32 boot_mode;
+
+ if (rtwdev->hci.type != RTW89_HCI_TYPE_USB)
+ return;
+
+ boot_mode = rtw89_read32_mask(rtwdev, R_AX_GPIO_MUXCFG, B_AX_BOOT_MODE);
+ if (!boot_mode)
+ return;
+
+ rtw89_write32_clr(rtwdev, R_AX_SYS_PW_CTRL, B_AX_APFN_ONMAC);
+ rtw89_write32_clr(rtwdev, R_AX_SYS_STATUS1, B_AX_AUTO_WLPON);
+ rtw89_write32_clr(rtwdev, R_AX_GPIO_MUXCFG, B_AX_BOOT_MODE);
+ rtw89_write32_clr(rtwdev, R_AX_RSV_CTRL, B_AX_R_DIS_PRST);
+}
+
static int rtw89_mac_power_switch(struct rtw89_dev *rtwdev, bool on)
{
#define PWR_ACT 1
@@ -1450,6 +1467,8 @@ static int rtw89_mac_power_switch(struct rtw89_dev *rtwdev, bool on)
int ret;
u8 val;
+ rtw89_mac_power_switch_boot_mode(rtwdev);
+
if (on) {
cfg_seq = chip->pwr_on_seq;
cfg_func = chip->ops->pwr_on_func;
diff --git a/drivers/net/wireless/realtek/rtw89/reg.h b/drivers/net/wireless/realtek/rtw89/reg.h
index c680441232fb..be4a8486c9f8 100644
--- a/drivers/net/wireless/realtek/rtw89/reg.h
+++ b/drivers/net/wireless/realtek/rtw89/reg.h
@@ -183,6 +183,7 @@
#define R_AX_SYS_STATUS1 0x00F4
#define B_AX_SEL_0XC0_MASK GENMASK(17, 16)
+#define B_AX_AUTO_WLPON BIT(10)
#define B_AX_PAD_HCI_SEL_V2_MASK GENMASK(5, 3)
#define MAC_AX_HCI_SEL_SDIO_UART 0
#define MAC_AX_HCI_SEL_MULTI_USB 1
--
2.49.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH rtw-next v3 11/14] wifi: rtw89: Add some definitions for USB
2025-06-20 18:51 [PATCH rtw-next v3 00/14] wifi: rtw89: Add support for USB devices Bitterblue Smith
` (9 preceding siblings ...)
2025-06-20 19:02 ` [PATCH rtw-next v3 10/14] wifi: rtw89: Fix rtw89_mac_power_switch() " Bitterblue Smith
@ 2025-06-20 19:03 ` Bitterblue Smith
2025-06-20 19:04 ` [PATCH rtw-next v3 12/14] wifi: rtw89: Add usb.{c,h} Bitterblue Smith
` (2 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Bitterblue Smith @ 2025-06-20 19:03 UTC (permalink / raw)
To: linux-wireless@vger.kernel.org; +Cc: Ping-Ke Shih
Add various register and bit definitions which will be used by the new
USB driver.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
---
v2:
- Add Acked-by.
v3:
- No change.
---
drivers/net/wireless/realtek/rtw89/reg.h | 29 +++++++++++++++++++++++
drivers/net/wireless/realtek/rtw89/txrx.h | 1 +
2 files changed, 30 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw89/reg.h b/drivers/net/wireless/realtek/rtw89/reg.h
index be4a8486c9f8..aa9e1668996d 100644
--- a/drivers/net/wireless/realtek/rtw89/reg.h
+++ b/drivers/net/wireless/realtek/rtw89/reg.h
@@ -382,6 +382,18 @@
#define B_AX_ACH1_BUSY BIT(9)
#define B_AX_ACH0_BUSY BIT(8)
+#define R_AX_USB_ENDPOINT_0 0x1060
+#define B_AX_EP_IDX GENMASK(3, 0)
+#define R_AX_USB_ENDPOINT_2 0x1068
+#define NUMP 0x1
+#define R_AX_USB_HOST_REQUEST_2 0x1078
+#define B_AX_R_USBIO_MODE BIT(4)
+#define R_AX_USB3_MAC_NPI_CONFIG_INTF_0 0x1114
+#define B_AX_SSPHY_LFPS_FILTER BIT(31)
+#define R_AX_USB_WLAN0_1 0x1174
+#define B_AX_USBRX_RST BIT(9)
+#define B_AX_USBTX_RST BIT(8)
+
#define R_AX_PCIE_DBG_CTRL 0x11C0
#define B_AX_DBG_DUMMY_MASK GENMASK(23, 16)
#define B_AX_PCIE_DBG_SEL_MASK GENMASK(15, 13)
@@ -461,6 +473,17 @@
#define R_AX_WP_PAGE_CTRL2_V1 0x17A4
#define R_AX_WP_PAGE_INFO1_V1 0x17A8
+#define R_AX_USB_ENDPOINT_0_V1 0x5060
+#define B_AX_EP_IDX_V1 GENMASK(3, 0)
+#define R_AX_USB_ENDPOINT_2_V1 0x5068
+#define R_AX_USB_HOST_REQUEST_2_V1 0x5078
+#define B_AX_R_USBIO_MODE_V1 BIT(4)
+#define R_AX_USB3_MAC_NPI_CONFIG_INTF_0_V1 0x5114
+#define B_AX_SSPHY_LFPS_FILTER_V1 BIT(31)
+#define R_AX_USB_WLAN0_1_V1 0x5174
+#define B_AX_USBRX_RST_V1 BIT(9)
+#define B_AX_USBTX_RST_V1 BIT(8)
+
#define R_AX_H2CREG_DATA0_V1 0x7140
#define R_AX_H2CREG_DATA1_V1 0x7144
#define R_AX_H2CREG_DATA2_V1 0x7148
@@ -1027,6 +1050,12 @@
#define B_AX_DISPATCHER_INTN_SEL_MASK GENMASK(7, 4)
#define B_AX_DISPATCHER_CH_SEL_MASK GENMASK(3, 0)
+#define R_AX_RXDMA_SETTING 0x8908
+#define B_AX_BULK_SIZE GENMASK(1, 0)
+#define USB11_BULKSIZE 0x2
+#define USB2_BULKSIZE 0x1
+#define USB3_BULKSIZE 0x0
+
#define R_AX_RX_FUNCTION_STOP 0x8920
#define B_AX_HDR_RX_STOP BIT(0)
diff --git a/drivers/net/wireless/realtek/rtw89/txrx.h b/drivers/net/wireless/realtek/rtw89/txrx.h
index 94f27a9ee9f7..ec01bfc363da 100644
--- a/drivers/net/wireless/realtek/rtw89/txrx.h
+++ b/drivers/net/wireless/realtek/rtw89/txrx.h
@@ -73,6 +73,7 @@ static inline u8 rtw89_get_data_nss(struct rtw89_dev *rtwdev, u16 hw_rate)
#define RTW89_TXWD_BODY0_FW_DL BIT(20)
#define RTW89_TXWD_BODY0_CHANNEL_DMA GENMASK(19, 16)
#define RTW89_TXWD_BODY0_HDR_LLC_LEN GENMASK(15, 11)
+#define RTW89_TXWD_BODY0_STF_MODE BIT(10)
#define RTW89_TXWD_BODY0_WD_PAGE BIT(7)
#define RTW89_TXWD_BODY0_HW_AMSDU BIT(5)
#define RTW89_TXWD_BODY0_HW_SSN_SEL GENMASK(3, 2)
--
2.49.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH rtw-next v3 12/14] wifi: rtw89: Add usb.{c,h}
2025-06-20 18:51 [PATCH rtw-next v3 00/14] wifi: rtw89: Add support for USB devices Bitterblue Smith
` (10 preceding siblings ...)
2025-06-20 19:03 ` [PATCH rtw-next v3 11/14] wifi: rtw89: Add some definitions " Bitterblue Smith
@ 2025-06-20 19:04 ` Bitterblue Smith
2025-06-23 20:08 ` Bitterblue Smith
2025-06-24 6:18 ` Ping-Ke Shih
2025-06-20 19:05 ` [PATCH rtw-next v3 13/14] wifi: rtw89: Add rtw8851bu.c Bitterblue Smith
2025-06-20 19:05 ` [PATCH rtw-next v3 14/14] wifi: rtw89: Enable the new USB modules Bitterblue Smith
13 siblings, 2 replies; 22+ messages in thread
From: Bitterblue Smith @ 2025-06-20 19:04 UTC (permalink / raw)
To: linux-wireless@vger.kernel.org; +Cc: Ping-Ke Shih
Add very basic USB support. No TX/RX aggregation, no TX queues, no
switching to USB 3 mode.
RTL8851BU and RTL8832BU work.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
---
v2:
- Don't do vendor requests when unplugged.
- Rename rtw89_get_usb_priv() to rtw89_usb_priv().
- Move rtw89_usb_read_port_complete() forward declaration to the top
of usb.c.
- Remove unnecessary empty lines.
- Rename "error" variable to "ret".
- Don't call usb_kill_urb() in rtw89_usb_free_rx_bufs().
- Use u32_get_bits() in rtw89_usb_vendorreq().
- Initialise rtwdev->hci.dle_type.
- Delete vendor_req_mutex.
v3:
- Avoid skb_over_panic in rtw89_usb_fwcmd_submit() when the size is
a multiple of 512. We can't just extend the skb by 4 bytes, it has
to be copied. This was triggered by the hardware scan offload feature
in the "00" regulatory domain.
- Convert the warning in rtw89_usb_fwcmd_submit() into a debug message.
- Delete empty line in rtw89_usb_fwcmd_submit().
- Reschedule rx_work when rtw89_usb_rx_handler() finds more than 200
frames in the queue.
- Use sizeof(*rtwusb->vendor_req_buf) instead of sizeof(u32) in
rtw89_usb_intf_init().
---
drivers/net/wireless/realtek/rtw89/usb.c | 1031 ++++++++++++++++++++++
drivers/net/wireless/realtek/rtw89/usb.h | 60 ++
2 files changed, 1091 insertions(+)
create mode 100644 drivers/net/wireless/realtek/rtw89/usb.c
create mode 100644 drivers/net/wireless/realtek/rtw89/usb.h
diff --git a/drivers/net/wireless/realtek/rtw89/usb.c b/drivers/net/wireless/realtek/rtw89/usb.c
new file mode 100644
index 000000000000..f92ea6068c95
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtw89/usb.c
@@ -0,0 +1,1031 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/* Copyright(c) 2025 Realtek Corporation
+ */
+
+#include <linux/usb.h>
+#include "debug.h"
+#include "mac.h"
+#include "reg.h"
+#include "txrx.h"
+#include "usb.h"
+
+static void rtw89_usb_read_port_complete(struct urb *urb);
+
+static void rtw89_usb_vendorreq(struct rtw89_dev *rtwdev, u32 addr,
+ void *data, u16 len, u8 reqtype)
+{
+ struct rtw89_usb *rtwusb = rtw89_usb_priv(rtwdev);
+ struct usb_device *udev = rtwusb->udev;
+ unsigned int pipe;
+ u16 value, index;
+ int attempt, ret;
+
+ if (test_bit(RTW89_FLAG_UNPLUGGED, rtwdev->flags))
+ return;
+
+ value = u32_get_bits(addr, GENMASK(15, 0));
+ index = u32_get_bits(addr, GENMASK(23, 16));
+
+ for (attempt = 0; attempt < 10; attempt++) {
+ *rtwusb->vendor_req_buf = 0;
+
+ if (reqtype == RTW89_USB_VENQT_READ) {
+ pipe = usb_rcvctrlpipe(udev, 0);
+ } else { /* RTW89_USB_VENQT_WRITE */
+ pipe = usb_sndctrlpipe(udev, 0);
+
+ memcpy(rtwusb->vendor_req_buf, data, len);
+ }
+
+ ret = usb_control_msg(udev, pipe, RTW89_USB_VENQT, reqtype,
+ value, index, rtwusb->vendor_req_buf,
+ len, 500);
+
+ if (ret == len) { /* Success */
+ atomic_set(&rtwusb->continual_io_error, 0);
+
+ if (reqtype == RTW89_USB_VENQT_READ)
+ memcpy(data, rtwusb->vendor_req_buf, len);
+
+ break;
+ }
+
+ if (ret == -ESHUTDOWN || ret == -ENODEV)
+ set_bit(RTW89_FLAG_UNPLUGGED, rtwdev->flags);
+ else if (ret < 0)
+ rtw89_warn(rtwdev,
+ "usb %s%u 0x%x fail ret=%d value=0x%x attempt=%d\n",
+ reqtype == RTW89_USB_VENQT_READ ? "read" : "write",
+ len * 8, addr, ret,
+ le32_to_cpup(rtwusb->vendor_req_buf),
+ attempt);
+ else if (ret > 0 && reqtype == RTW89_USB_VENQT_READ)
+ memcpy(data, rtwusb->vendor_req_buf, len);
+
+ if (atomic_inc_return(&rtwusb->continual_io_error) > 4) {
+ set_bit(RTW89_FLAG_UNPLUGGED, rtwdev->flags);
+ break;
+ }
+ }
+}
+
+static u32 rtw89_usb_read_cmac(struct rtw89_dev *rtwdev, u32 addr)
+{
+ u32 addr32, val32, shift;
+ __le32 data = 0;
+ int count;
+
+ addr32 = addr & ~0x3;
+ shift = (addr & 0x3) * 8;
+
+ for (count = 0; ; count++) {
+ rtw89_usb_vendorreq(rtwdev, addr32, &data, 4,
+ RTW89_USB_VENQT_READ);
+
+ val32 = le32_to_cpu(data);
+ if (val32 != RTW89_R32_DEAD)
+ break;
+
+ if (count >= MAC_REG_POOL_COUNT) {
+ rtw89_warn(rtwdev, "%s: addr %#x = %#x\n",
+ __func__, addr32, val32);
+ val32 = RTW89_R32_DEAD;
+ break;
+ }
+
+ rtw89_write32(rtwdev, R_AX_CK_EN, B_AX_CMAC_ALLCKEN);
+ }
+
+ return val32 >> shift;
+}
+
+static u8 rtw89_usb_ops_read8(struct rtw89_dev *rtwdev, u32 addr)
+{
+ u8 data = 0;
+
+ if (ACCESS_CMAC(addr))
+ return rtw89_usb_read_cmac(rtwdev, addr);
+
+ rtw89_usb_vendorreq(rtwdev, addr, &data, 1, RTW89_USB_VENQT_READ);
+
+ return data;
+}
+
+static u16 rtw89_usb_ops_read16(struct rtw89_dev *rtwdev, u32 addr)
+{
+ __le16 data = 0;
+
+ if (ACCESS_CMAC(addr))
+ return rtw89_usb_read_cmac(rtwdev, addr);
+
+ rtw89_usb_vendorreq(rtwdev, addr, &data, 2, RTW89_USB_VENQT_READ);
+
+ return le16_to_cpu(data);
+}
+
+static u32 rtw89_usb_ops_read32(struct rtw89_dev *rtwdev, u32 addr)
+{
+ __le32 data = 0;
+
+ if (ACCESS_CMAC(addr))
+ return rtw89_usb_read_cmac(rtwdev, addr);
+
+ rtw89_usb_vendorreq(rtwdev, addr, &data, 4,
+ RTW89_USB_VENQT_READ);
+
+ return le32_to_cpu(data);
+}
+
+static void rtw89_usb_ops_write8(struct rtw89_dev *rtwdev, u32 addr, u8 val)
+{
+ u8 data = val;
+
+ rtw89_usb_vendorreq(rtwdev, addr, &data, 1, RTW89_USB_VENQT_WRITE);
+}
+
+static void rtw89_usb_ops_write16(struct rtw89_dev *rtwdev, u32 addr, u16 val)
+{
+ __le16 data = cpu_to_le16(val);
+
+ rtw89_usb_vendorreq(rtwdev, addr, &data, 2, RTW89_USB_VENQT_WRITE);
+}
+
+static void rtw89_usb_ops_write32(struct rtw89_dev *rtwdev, u32 addr, u32 val)
+{
+ __le32 data = cpu_to_le32(val);
+
+ rtw89_usb_vendorreq(rtwdev, addr, &data, 4, RTW89_USB_VENQT_WRITE);
+}
+
+static u32
+rtw89_usb_ops_check_and_reclaim_tx_resource(struct rtw89_dev *rtwdev,
+ u8 txch)
+{
+ if (txch == RTW89_TXCH_CH12)
+ return 1;
+
+ return 42; /* TODO some kind of calculation? */
+}
+
+static void rtw89_usb_ops_tx_kick_off(struct rtw89_dev *rtwdev, u8 txch)
+{
+ /* TODO later. for now transmit every frame right away in
+ * rtw89_usb_ops_tx_write
+ */
+}
+
+static u8 rtw89_usb_get_bulkout_id(u8 ch_dma)
+{
+ switch (ch_dma) {
+ case RTW89_DMA_ACH0:
+ return 3;
+ case RTW89_DMA_ACH1:
+ return 4;
+ case RTW89_DMA_ACH2:
+ return 5;
+ case RTW89_DMA_ACH3:
+ return 6;
+ default:
+ case RTW89_DMA_B0MG:
+ return 0;
+ case RTW89_DMA_B0HI:
+ return 1;
+ case RTW89_DMA_H2C:
+ return 2;
+ }
+}
+
+static int rtw89_usb_write_port(struct rtw89_dev *rtwdev, u8 ch_dma,
+ void *data, int len, usb_complete_t cb,
+ void *context)
+{
+ struct rtw89_usb *rtwusb = rtw89_usb_priv(rtwdev);
+ struct usb_device *usbd = rtwusb->udev;
+ struct urb *urb;
+ u8 bulkout_id = rtw89_usb_get_bulkout_id(ch_dma);
+ unsigned int pipe;
+ int ret;
+
+ if (test_bit(RTW89_FLAG_UNPLUGGED, rtwdev->flags))
+ return 0;
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb)
+ return -ENOMEM;
+
+ pipe = usb_sndbulkpipe(usbd, rtwusb->out_pipe[bulkout_id]);
+
+ usb_fill_bulk_urb(urb, usbd, pipe, data, len, cb, context);
+ urb->transfer_flags |= URB_ZERO_PACKET;
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+
+ if (ret)
+ usb_free_urb(urb);
+
+ if (ret == -ENODEV)
+ set_bit(RTW89_FLAG_UNPLUGGED, rtwdev->flags);
+
+ return ret;
+}
+
+static void rtw89_usb_write_port_complete_fwcmd(struct urb *urb)
+{
+ struct rtw89_usb_tx_ctrl_block *txcb = urb->context;
+ struct rtw89_dev *rtwdev = txcb->rtwdev;
+
+ switch (urb->status) {
+ case 0:
+ case -EPIPE:
+ case -EPROTO:
+ case -EINPROGRESS:
+ case -ENOENT:
+ case -ECONNRESET:
+ break;
+ default:
+ set_bit(RTW89_FLAG_UNPLUGGED, rtwdev->flags);
+ break;
+ }
+
+ skb_queue_purge(&txcb->tx_ack_queue);
+ kfree(txcb);
+ usb_free_urb(urb);
+}
+
+static int rtw89_usb_fwcmd_submit(struct rtw89_dev *rtwdev,
+ struct rtw89_core_tx_request *tx_req)
+{
+ struct rtw89_tx_desc_info *desc_info = &tx_req->desc_info;
+ struct rtw89_usb_tx_ctrl_block *txcb;
+ struct sk_buff *skb = tx_req->skb;
+ struct sk_buff *skb512;
+ int txdesc_size = rtwdev->chip->h2c_desc_size;
+ void *txdesc;
+ int ret;
+
+ if (((desc_info->pkt_size + txdesc_size) % 512) == 0) {
+ rtw89_info(rtwdev, "avoiding multiple of 512\n");
+
+ skb512 = dev_alloc_skb(txdesc_size + desc_info->pkt_size +
+ RTW89_USB_MOD512_PADDING);
+ if (!skb512) {
+ rtw89_err(rtwdev, "%s: failed to allocate skb\n",
+ __func__);
+
+ return -ENOMEM;
+ }
+
+ skb_pull(skb512, txdesc_size);
+ skb_put_data(skb512, skb->data, skb->len);
+ skb_put_zero(skb512, RTW89_USB_MOD512_PADDING);
+
+ dev_kfree_skb_any(skb);
+ skb = skb512;
+ tx_req->skb = skb512;
+
+ desc_info->pkt_size += RTW89_USB_MOD512_PADDING;
+ }
+
+ txcb = kmalloc(sizeof(*txcb), GFP_ATOMIC);
+ if (!txcb)
+ return -ENOMEM;
+
+ txdesc = skb_push(skb, txdesc_size);
+ memset(txdesc, 0, txdesc_size);
+ rtw89_chip_fill_txdesc_fwcmd(rtwdev, desc_info, txdesc);
+
+ txcb->rtwdev = rtwdev;
+ skb_queue_head_init(&txcb->tx_ack_queue);
+
+ skb_queue_tail(&txcb->tx_ack_queue, skb);
+
+ ret = rtw89_usb_write_port(rtwdev, RTW89_DMA_H2C, skb->data, skb->len,
+ rtw89_usb_write_port_complete_fwcmd, txcb);
+ if (ret) {
+ rtw89_err(rtwdev, "%s failed: %d\n", __func__, ret);
+
+ skb_dequeue(&txcb->tx_ack_queue);
+ kfree(txcb);
+ }
+
+ return ret;
+}
+
+static void rtw89_usb_write_port_complete(struct urb *urb)
+{
+ struct rtw89_usb_tx_ctrl_block *txcb = urb->context;
+ struct rtw89_dev *rtwdev = txcb->rtwdev;
+ struct ieee80211_tx_info *info;
+ struct sk_buff *skb;
+
+ while (true) {
+ skb = skb_dequeue(&txcb->tx_ack_queue);
+ if (!skb)
+ break;
+
+ info = IEEE80211_SKB_CB(skb);
+ ieee80211_tx_info_clear_status(info);
+
+ if (urb->status == 0) {
+ if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+ info->flags |= IEEE80211_TX_STAT_NOACK_TRANSMITTED;
+ else
+ info->flags |= IEEE80211_TX_STAT_ACK;
+ }
+
+ ieee80211_tx_status_irqsafe(rtwdev->hw, skb);
+ }
+
+ switch (urb->status) {
+ case 0:
+ case -EPIPE:
+ case -EPROTO:
+ case -EINPROGRESS:
+ case -ENOENT:
+ case -ECONNRESET:
+ break;
+ default:
+ set_bit(RTW89_FLAG_UNPLUGGED, rtwdev->flags);
+ break;
+ }
+
+ kfree(txcb);
+ usb_free_urb(urb);
+}
+
+static int rtw89_usb_ops_tx_write(struct rtw89_dev *rtwdev,
+ struct rtw89_core_tx_request *tx_req)
+{
+ struct rtw89_tx_desc_info *desc_info = &tx_req->desc_info;
+ const struct rtw89_chip_info *chip = rtwdev->chip;
+ struct rtw89_usb_tx_ctrl_block *txcb;
+ struct sk_buff *skb = tx_req->skb;
+ struct rtw89_txwd_body *txdesc;
+ u32 txdesc_size;
+ int ret, len;
+
+ if ((desc_info->ch_dma == RTW89_TXCH_CH12 ||
+ tx_req->tx_type == RTW89_CORE_TX_TYPE_FWCMD) &&
+ (desc_info->ch_dma != RTW89_TXCH_CH12 ||
+ tx_req->tx_type != RTW89_CORE_TX_TYPE_FWCMD)) {
+ rtw89_err(rtwdev, "dma channel %d/TX type %d mismatch\n",
+ desc_info->ch_dma, tx_req->tx_type);
+ return -EINVAL;
+ }
+
+ if (desc_info->ch_dma == RTW89_TXCH_CH12)
+ return rtw89_usb_fwcmd_submit(rtwdev, tx_req);
+
+ txcb = kmalloc(sizeof(*txcb), GFP_ATOMIC);
+ if (!txcb)
+ return -ENOMEM;
+
+ txdesc_size = chip->txwd_body_size;
+ if (desc_info->en_wd_info)
+ txdesc_size += chip->txwd_info_size;
+
+ txdesc = (struct rtw89_txwd_body *)(skb->data - txdesc_size);
+ len = skb->len + txdesc_size;
+ memset(txdesc, 0, txdesc_size);
+ rtw89_chip_fill_txdesc(rtwdev, desc_info, txdesc);
+
+ le32p_replace_bits(&txdesc->dword0, 1, RTW89_TXWD_BODY0_STF_MODE);
+
+ txcb->rtwdev = rtwdev;
+ skb_queue_head_init(&txcb->tx_ack_queue);
+
+ skb_queue_tail(&txcb->tx_ack_queue, skb);
+
+ ret = rtw89_usb_write_port(rtwdev, desc_info->ch_dma, txdesc, len,
+ rtw89_usb_write_port_complete, txcb);
+ if (ret) {
+ rtw89_err(rtwdev, "%s failed: %d\n", __func__, ret);
+
+ skb_dequeue(&txcb->tx_ack_queue);
+ kfree(txcb);
+ }
+
+ return ret;
+}
+
+static void rtw89_usb_rx_handler(struct work_struct *work)
+{
+ struct rtw89_usb *rtwusb = container_of(work, struct rtw89_usb, rx_work);
+ struct rtw89_dev *rtwdev = rtwusb->rtwdev;
+ struct rtw89_rx_desc_info desc_info;
+ struct sk_buff *rx_skb;
+ struct sk_buff *skb;
+ u32 pkt_offset;
+ int limit;
+
+ for (limit = 0; limit < 200; limit++) {
+ rx_skb = skb_dequeue(&rtwusb->rx_queue);
+ if (!rx_skb)
+ break;
+
+ if (skb_queue_len(&rtwusb->rx_queue) >= RTW89_USB_MAX_RXQ_LEN) {
+ rtw89_warn(rtwdev, "rx_queue overflow\n");
+ dev_kfree_skb_any(rx_skb);
+ continue;
+ }
+
+ memset(&desc_info, 0, sizeof(desc_info));
+ rtw89_chip_query_rxdesc(rtwdev, &desc_info, rx_skb->data, 0);
+
+ skb = rtw89_alloc_skb_for_rx(rtwdev, desc_info.pkt_size);
+ if (!skb) {
+ rtw89_debug(rtwdev, RTW89_DBG_HCI,
+ "failed to allocate RX skb of size %u\n",
+ desc_info.pkt_size);
+ continue;
+ }
+
+ pkt_offset = desc_info.offset + desc_info.rxd_len;
+
+ skb_put_data(skb, rx_skb->data + pkt_offset,
+ desc_info.pkt_size);
+
+ rtw89_core_rx(rtwdev, &desc_info, skb);
+
+ if (skb_queue_len(&rtwusb->rx_free_queue) >= RTW89_USB_RX_SKB_NUM)
+ dev_kfree_skb_any(rx_skb);
+ else
+ skb_queue_tail(&rtwusb->rx_free_queue, rx_skb);
+ }
+
+ if (limit == 200) {
+ rtw89_debug(rtwdev, RTW89_DBG_HCI,
+ "left %d rx skbs in the queue for later\n",
+ skb_queue_len(&rtwusb->rx_queue));
+ queue_work(rtwusb->rxwq, &rtwusb->rx_work);
+ }
+}
+
+static void rtw89_usb_rx_resubmit(struct rtw89_usb *rtwusb,
+ struct rtw89_usb_rx_ctrl_block *rxcb,
+ gfp_t gfp)
+{
+ struct rtw89_dev *rtwdev = rtwusb->rtwdev;
+ struct sk_buff *rx_skb;
+ int ret;
+
+ rx_skb = skb_dequeue(&rtwusb->rx_free_queue);
+ if (!rx_skb)
+ rx_skb = alloc_skb(RTW89_USB_RECVBUF_SZ, gfp);
+
+ if (!rx_skb)
+ goto try_later;
+
+ skb_reset_tail_pointer(rx_skb);
+ rx_skb->len = 0;
+
+ rxcb->rx_skb = rx_skb;
+
+ usb_fill_bulk_urb(rxcb->rx_urb, rtwusb->udev,
+ usb_rcvbulkpipe(rtwusb->udev, rtwusb->in_pipe),
+ rxcb->rx_skb->data, RTW89_USB_RECVBUF_SZ,
+ rtw89_usb_read_port_complete, rxcb);
+
+ ret = usb_submit_urb(rxcb->rx_urb, gfp);
+ if (ret) {
+ skb_queue_tail(&rtwusb->rx_free_queue, rxcb->rx_skb);
+
+ if (ret == -ENODEV)
+ set_bit(RTW89_FLAG_UNPLUGGED, rtwdev->flags);
+ else
+ rtw89_err(rtwdev, "Err sending rx data urb %d\n", ret);
+
+ if (ret == -ENOMEM)
+ goto try_later;
+ }
+
+ return;
+
+try_later:
+ rxcb->rx_skb = NULL;
+ queue_work(rtwusb->rxwq, &rtwusb->rx_urb_work);
+}
+
+static void rtw89_usb_rx_resubmit_work(struct work_struct *work)
+{
+ struct rtw89_usb *rtwusb = container_of(work, struct rtw89_usb, rx_urb_work);
+ struct rtw89_usb_rx_ctrl_block *rxcb;
+ int i;
+
+ for (i = 0; i < RTW89_USB_RXCB_NUM; i++) {
+ rxcb = &rtwusb->rx_cb[i];
+
+ if (!rxcb->rx_skb)
+ rtw89_usb_rx_resubmit(rtwusb, rxcb, GFP_ATOMIC);
+ }
+}
+
+static void rtw89_usb_read_port_complete(struct urb *urb)
+{
+ struct rtw89_usb_rx_ctrl_block *rxcb = urb->context;
+ struct rtw89_dev *rtwdev = rxcb->rtwdev;
+ struct rtw89_usb *rtwusb = rtw89_usb_priv(rtwdev);
+ struct sk_buff *skb = rxcb->rx_skb;
+
+ if (urb->status == 0) {
+ if (urb->actual_length > urb->transfer_buffer_length ||
+ urb->actual_length < sizeof(struct rtw89_rxdesc_short)) {
+ rtw89_err(rtwdev, "failed to get urb length: %d\n",
+ urb->actual_length);
+ skb_queue_tail(&rtwusb->rx_free_queue, skb);
+ } else {
+ skb_put(skb, urb->actual_length);
+ skb_queue_tail(&rtwusb->rx_queue, skb);
+ queue_work(rtwusb->rxwq, &rtwusb->rx_work);
+ }
+
+ rtw89_usb_rx_resubmit(rtwusb, rxcb, GFP_ATOMIC);
+ } else {
+ skb_queue_tail(&rtwusb->rx_free_queue, skb);
+
+ if (atomic_inc_return(&rtwusb->continual_io_error) > 4)
+ set_bit(RTW89_FLAG_UNPLUGGED, rtwdev->flags);
+
+ switch (urb->status) {
+ case -EINVAL:
+ case -EPIPE:
+ case -ENODEV:
+ case -ESHUTDOWN:
+ set_bit(RTW89_FLAG_UNPLUGGED, rtwdev->flags);
+ break;
+ case -EPROTO:
+ case -EILSEQ:
+ case -ETIME:
+ case -ECOMM:
+ case -EOVERFLOW:
+ case -ENOENT:
+ break;
+ case -EINPROGRESS:
+ rtw89_info(rtwdev, "URB is in progress\n");
+ break;
+ default:
+ rtw89_err(rtwdev, "%s status %d\n",
+ __func__, urb->status);
+ break;
+ }
+ }
+}
+
+static void rtw89_usb_cancel_rx_bufs(struct rtw89_usb *rtwusb)
+{
+ struct rtw89_usb_rx_ctrl_block *rxcb;
+ int i;
+
+ for (i = 0; i < RTW89_USB_RXCB_NUM; i++) {
+ rxcb = &rtwusb->rx_cb[i];
+ usb_kill_urb(rxcb->rx_urb);
+ }
+}
+
+static void rtw89_usb_free_rx_bufs(struct rtw89_usb *rtwusb)
+{
+ struct rtw89_usb_rx_ctrl_block *rxcb;
+ int i;
+
+ for (i = 0; i < RTW89_USB_RXCB_NUM; i++) {
+ rxcb = &rtwusb->rx_cb[i];
+ usb_free_urb(rxcb->rx_urb);
+ }
+}
+
+static int rtw89_usb_alloc_rx_bufs(struct rtw89_usb *rtwusb)
+{
+ struct rtw89_usb_rx_ctrl_block *rxcb;
+ int i;
+
+ for (i = 0; i < RTW89_USB_RXCB_NUM; i++) {
+ rxcb = &rtwusb->rx_cb[i];
+
+ rxcb->rtwdev = rtwusb->rtwdev;
+ rxcb->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!rxcb->rx_urb) {
+ rtw89_usb_free_rx_bufs(rtwusb);
+ return -ENOMEM;
+ }
+ }
+
+ return 0;
+}
+
+static int rtw89_usb_init_rx(struct rtw89_dev *rtwdev)
+{
+ struct rtw89_usb *rtwusb = rtw89_usb_priv(rtwdev);
+ struct sk_buff *rx_skb;
+ int i;
+
+ rtwusb->rxwq = alloc_workqueue("rtw89_usb: rx wq", WQ_BH, 0);
+ if (!rtwusb->rxwq) {
+ rtw89_err(rtwdev, "failed to create RX work queue\n");
+ return -ENOMEM;
+ }
+
+ skb_queue_head_init(&rtwusb->rx_queue);
+ skb_queue_head_init(&rtwusb->rx_free_queue);
+
+ INIT_WORK(&rtwusb->rx_work, rtw89_usb_rx_handler);
+ INIT_WORK(&rtwusb->rx_urb_work, rtw89_usb_rx_resubmit_work);
+
+ for (i = 0; i < RTW89_USB_RX_SKB_NUM; i++) {
+ rx_skb = alloc_skb(RTW89_USB_RECVBUF_SZ, GFP_KERNEL);
+ if (rx_skb)
+ skb_queue_tail(&rtwusb->rx_free_queue, rx_skb);
+ }
+
+ return 0;
+}
+
+static void rtw89_usb_deinit_rx(struct rtw89_dev *rtwdev)
+{
+ struct rtw89_usb *rtwusb = rtw89_usb_priv(rtwdev);
+
+ skb_queue_purge(&rtwusb->rx_queue);
+
+ destroy_workqueue(rtwusb->rxwq);
+
+ skb_queue_purge(&rtwusb->rx_free_queue);
+}
+
+static void rtw89_usb_start_rx(struct rtw89_dev *rtwdev)
+{
+ struct rtw89_usb *rtwusb = rtw89_usb_priv(rtwdev);
+ int i;
+
+ for (i = 0; i < RTW89_USB_RXCB_NUM; i++)
+ rtw89_usb_rx_resubmit(rtwusb, &rtwusb->rx_cb[i], GFP_KERNEL);
+}
+
+static void rtw89_usb_ops_reset(struct rtw89_dev *rtwdev)
+{
+ /* TODO: anything to do here? */
+}
+
+static int rtw89_usb_ops_start(struct rtw89_dev *rtwdev)
+{
+ return 0; /* Nothing to do. */
+}
+
+static void rtw89_usb_ops_stop(struct rtw89_dev *rtwdev)
+{
+ /* Nothing to do. */
+}
+
+static void rtw89_usb_ops_pause(struct rtw89_dev *rtwdev, bool pause)
+{
+ /* Nothing to do? */
+}
+
+static void rtw89_usb_ops_switch_mode(struct rtw89_dev *rtwdev, bool low_power)
+{
+ /* Nothing to do. */
+}
+
+static int rtw89_usb_ops_deinit(struct rtw89_dev *rtwdev)
+{
+ return 0; /* Nothing to do. */
+}
+
+static int rtw89_usb_ops_mac_pre_init(struct rtw89_dev *rtwdev)
+{
+ u32 val32;
+
+ rtw89_write32_set(rtwdev, R_AX_USB_HOST_REQUEST_2, B_AX_R_USBIO_MODE);
+
+ /* fix USB IO hang suggest by chihhanli@realtek.com */
+ rtw89_write32_clr(rtwdev, R_AX_USB_WLAN0_1,
+ B_AX_USBRX_RST | B_AX_USBTX_RST);
+
+ val32 = rtw89_read32(rtwdev, R_AX_HCI_FUNC_EN);
+ val32 &= ~(B_AX_HCI_RXDMA_EN | B_AX_HCI_TXDMA_EN);
+ rtw89_write32(rtwdev, R_AX_HCI_FUNC_EN, val32);
+
+ val32 |= B_AX_HCI_RXDMA_EN | B_AX_HCI_TXDMA_EN;
+ rtw89_write32(rtwdev, R_AX_HCI_FUNC_EN, val32);
+ /* fix USB TRX hang suggest by chihhanli@realtek.com */
+
+ return 0;
+}
+
+static int rtw89_usb_ops_mac_pre_deinit(struct rtw89_dev *rtwdev)
+{
+ return 0; /* Nothing to do. */
+}
+
+static int rtw89_usb_ops_mac_post_init(struct rtw89_dev *rtwdev)
+{
+ struct rtw89_usb *rtwusb = rtw89_usb_priv(rtwdev);
+ enum usb_device_speed speed;
+ u32 ep;
+
+ rtw89_write32_clr(rtwdev, R_AX_USB3_MAC_NPI_CONFIG_INTF_0,
+ B_AX_SSPHY_LFPS_FILTER);
+
+ speed = rtwusb->udev->speed;
+
+ if (speed == USB_SPEED_SUPER)
+ rtw89_write8(rtwdev, R_AX_RXDMA_SETTING, USB3_BULKSIZE);
+ else if (speed == USB_SPEED_HIGH)
+ rtw89_write8(rtwdev, R_AX_RXDMA_SETTING, USB2_BULKSIZE);
+ else
+ rtw89_write8(rtwdev, R_AX_RXDMA_SETTING, USB11_BULKSIZE);
+
+ for (ep = 5; ep <= 12; ep++) {
+ if (ep == 8)
+ continue;
+
+ rtw89_write8_mask(rtwdev, R_AX_USB_ENDPOINT_0,
+ B_AX_EP_IDX, ep);
+ rtw89_write8(rtwdev, R_AX_USB_ENDPOINT_2 + 1, NUMP);
+ }
+
+ return 0;
+}
+
+static void rtw89_usb_ops_recalc_int_mit(struct rtw89_dev *rtwdev)
+{
+ /* Nothing to do. */
+}
+
+static int rtw89_usb_ops_mac_lv1_rcvy(struct rtw89_dev *rtwdev,
+ enum rtw89_lv1_rcvy_step step)
+{
+ u32 reg, mask;
+
+ switch (rtwdev->chip->chip_id) {
+ case RTL8851B:
+ case RTL8852A:
+ case RTL8852B:
+ reg = R_AX_USB_WLAN0_1;
+ mask = B_AX_USBRX_RST | B_AX_USBTX_RST;
+ break;
+ case RTL8852C:
+ reg = R_AX_USB_WLAN0_1_V1;
+ mask = B_AX_USBRX_RST_V1 | B_AX_USBTX_RST_V1;
+ break;
+ default:
+ rtw89_err(rtwdev, "%s: fix me\n", __func__);
+ return -EOPNOTSUPP;
+ }
+
+ switch (step) {
+ case RTW89_LV1_RCVY_STEP_1:
+ rtw89_write32_set(rtwdev, reg, mask);
+
+ msleep(30);
+ break;
+ case RTW89_LV1_RCVY_STEP_2:
+ rtw89_write32_clr(rtwdev, reg, mask);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void rtw89_usb_ops_dump_err_status(struct rtw89_dev *rtwdev)
+{
+ rtw89_warn(rtwdev, "%s TODO\n", __func__);
+}
+
+static const struct rtw89_hci_ops rtw89_usb_ops = {
+ .tx_write = rtw89_usb_ops_tx_write,
+ .tx_kick_off = rtw89_usb_ops_tx_kick_off,
+ .flush_queues = NULL, /* Not needed? */
+ .reset = rtw89_usb_ops_reset,
+ .start = rtw89_usb_ops_start,
+ .stop = rtw89_usb_ops_stop,
+ .pause = rtw89_usb_ops_pause,
+ .switch_mode = rtw89_usb_ops_switch_mode,
+ .recalc_int_mit = rtw89_usb_ops_recalc_int_mit,
+
+ .read8 = rtw89_usb_ops_read8,
+ .read16 = rtw89_usb_ops_read16,
+ .read32 = rtw89_usb_ops_read32,
+ .write8 = rtw89_usb_ops_write8,
+ .write16 = rtw89_usb_ops_write16,
+ .write32 = rtw89_usb_ops_write32,
+
+ .mac_pre_init = rtw89_usb_ops_mac_pre_init,
+ .mac_pre_deinit = rtw89_usb_ops_mac_pre_deinit,
+ .mac_post_init = rtw89_usb_ops_mac_post_init,
+ .deinit = rtw89_usb_ops_deinit,
+
+ .check_and_reclaim_tx_resource = rtw89_usb_ops_check_and_reclaim_tx_resource,
+ .mac_lv1_rcvy = rtw89_usb_ops_mac_lv1_rcvy,
+ .dump_err_status = rtw89_usb_ops_dump_err_status,
+ .napi_poll = NULL,
+
+ .recovery_start = NULL,
+ .recovery_complete = NULL,
+
+ .ctrl_txdma_ch = NULL,
+ .ctrl_txdma_fw_ch = NULL,
+ .ctrl_trxhci = NULL,
+ .poll_txdma_ch_idle = NULL,
+
+ .clr_idx_all = NULL,
+ .clear = NULL,
+ .disable_intr = NULL,
+ .enable_intr = NULL,
+ .rst_bdram = NULL,
+};
+
+static int rtw89_usb_parse(struct rtw89_dev *rtwdev,
+ struct usb_interface *intf)
+{
+ struct usb_host_interface *host_interface = &intf->altsetting[0];
+ struct usb_interface_descriptor *intf_desc = &host_interface->desc;
+ struct rtw89_usb *rtwusb = rtw89_usb_priv(rtwdev);
+ struct usb_endpoint_descriptor *endpoint;
+ int num_out_pipes = 0;
+ u8 num;
+ int i;
+
+ if (intf_desc->bNumEndpoints > RTW89_MAX_ENDPOINT_NUM) {
+ rtw89_err(rtwdev, "found %d endpoints, expected %d max\n",
+ intf_desc->bNumEndpoints, RTW89_MAX_ENDPOINT_NUM);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < intf_desc->bNumEndpoints; i++) {
+ endpoint = &host_interface->endpoint[i].desc;
+ num = usb_endpoint_num(endpoint);
+
+ if (usb_endpoint_dir_in(endpoint) &&
+ usb_endpoint_xfer_bulk(endpoint)) {
+ if (rtwusb->in_pipe) {
+ rtw89_err(rtwdev,
+ "found more than 1 bulk in endpoint\n");
+ return -EINVAL;
+ }
+
+ rtwusb->in_pipe = num;
+ }
+
+ if (usb_endpoint_dir_out(endpoint) &&
+ usb_endpoint_xfer_bulk(endpoint)) {
+ if (num_out_pipes >= RTW89_MAX_BULKOUT_NUM) {
+ rtw89_err(rtwdev,
+ "found more than %d bulk out endpoints\n",
+ RTW89_MAX_BULKOUT_NUM);
+ return -EINVAL;
+ }
+
+ rtwusb->out_pipe[num_out_pipes++] = num;
+ }
+ }
+
+ if (num_out_pipes < 1) {
+ rtw89_err(rtwdev, "no bulk out endpoints found\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int rtw89_usb_intf_init(struct rtw89_dev *rtwdev,
+ struct usb_interface *intf)
+{
+ struct rtw89_usb *rtwusb = rtw89_usb_priv(rtwdev);
+ int ret;
+
+ ret = rtw89_usb_parse(rtwdev, intf);
+ if (ret)
+ return ret;
+
+ rtwusb->vendor_req_buf = kmalloc(sizeof(*rtwusb->vendor_req_buf),
+ GFP_KERNEL);
+ if (!rtwusb->vendor_req_buf)
+ return -ENOMEM;
+
+ rtwusb->udev = usb_get_dev(interface_to_usbdev(intf));
+
+ usb_set_intfdata(intf, rtwdev->hw);
+
+ SET_IEEE80211_DEV(rtwdev->hw, &intf->dev);
+
+ return 0;
+}
+
+static void rtw89_usb_intf_deinit(struct rtw89_dev *rtwdev,
+ struct usb_interface *intf)
+{
+ struct rtw89_usb *rtwusb = rtw89_usb_priv(rtwdev);
+
+ usb_put_dev(rtwusb->udev);
+ kfree(rtwusb->vendor_req_buf);
+ usb_set_intfdata(intf, NULL);
+}
+
+int rtw89_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ const struct rtw89_driver_info *info;
+ struct rtw89_dev *rtwdev;
+ struct rtw89_usb *rtwusb;
+ int ret;
+
+ info = (const struct rtw89_driver_info *)id->driver_info;
+
+ rtwdev = rtw89_alloc_ieee80211_hw(&intf->dev,
+ sizeof(struct rtw89_usb),
+ info->chip, info->variant);
+ if (!rtwdev) {
+ dev_err(&intf->dev, "failed to allocate hw\n");
+ return -ENOMEM;
+ }
+
+ rtwusb = rtw89_usb_priv(rtwdev);
+ rtwusb->rtwdev = rtwdev;
+
+ rtwdev->hci.ops = &rtw89_usb_ops;
+ rtwdev->hci.type = RTW89_HCI_TYPE_USB;
+
+ ret = rtw89_usb_intf_init(rtwdev, intf);
+ if (ret) {
+ rtw89_err(rtwdev, "failed to initialise intf: %d\n", ret);
+ goto err_free_hw;
+ }
+
+ if (rtwusb->udev->speed == USB_SPEED_SUPER)
+ rtwdev->hci.dle_type = RTW89_HCI_DLE_TYPE_USB3;
+ else
+ rtwdev->hci.dle_type = RTW89_HCI_DLE_TYPE_USB2;
+
+ ret = rtw89_usb_alloc_rx_bufs(rtwusb);
+ if (ret)
+ goto err_intf_deinit;
+
+ ret = rtw89_usb_init_rx(rtwdev);
+ if (ret)
+ goto err_free_rx_bufs;
+
+ ret = rtw89_core_init(rtwdev);
+ if (ret) {
+ rtw89_err(rtwdev, "failed to initialise core: %d\n", ret);
+ goto err_deinit_rx;
+ }
+
+ ret = rtw89_chip_info_setup(rtwdev);
+ if (ret) {
+ rtw89_err(rtwdev, "failed to setup chip information\n");
+ goto err_core_deinit;
+ }
+
+ ret = rtw89_core_register(rtwdev);
+ if (ret) {
+ rtw89_err(rtwdev, "failed to register core\n");
+ goto err_core_deinit;
+ }
+
+ rtw89_usb_start_rx(rtwdev);
+
+ set_bit(RTW89_FLAG_PROBE_DONE, rtwdev->flags);
+
+ return 0;
+
+err_core_deinit:
+ rtw89_core_deinit(rtwdev);
+err_deinit_rx:
+ rtw89_usb_deinit_rx(rtwdev);
+err_free_rx_bufs:
+ rtw89_usb_free_rx_bufs(rtwusb);
+err_intf_deinit:
+ rtw89_usb_intf_deinit(rtwdev, intf);
+err_free_hw:
+ rtw89_free_ieee80211_hw(rtwdev);
+
+ return ret;
+}
+EXPORT_SYMBOL(rtw89_usb_probe);
+
+void rtw89_usb_disconnect(struct usb_interface *intf)
+{
+ struct ieee80211_hw *hw = usb_get_intfdata(intf);
+ struct rtw89_dev *rtwdev;
+ struct rtw89_usb *rtwusb;
+
+ if (!hw)
+ return;
+
+ rtwdev = hw->priv;
+ rtwusb = rtw89_usb_priv(rtwdev);
+
+ rtw89_usb_cancel_rx_bufs(rtwusb);
+
+ rtw89_core_unregister(rtwdev);
+ rtw89_core_deinit(rtwdev);
+ rtw89_usb_deinit_rx(rtwdev);
+ rtw89_usb_free_rx_bufs(rtwusb);
+ rtw89_usb_intf_deinit(rtwdev, intf);
+ rtw89_free_ieee80211_hw(rtwdev);
+}
+EXPORT_SYMBOL(rtw89_usb_disconnect);
+
+MODULE_AUTHOR("Bitterblue Smith <rtl8821cerfe2@gmail.com>");
+MODULE_DESCRIPTION("Realtek USB 802.11ax wireless driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/wireless/realtek/rtw89/usb.h b/drivers/net/wireless/realtek/rtw89/usb.h
new file mode 100644
index 000000000000..a2ab4e3f2115
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtw89/usb.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/* Copyright(c) 2025 Realtek Corporation
+ */
+
+#ifndef __RTW89_USB_H__
+#define __RTW89_USB_H__
+
+#define RTW89_USB_VENQT 0x05
+#define RTW89_USB_VENQT_READ 0xc0
+#define RTW89_USB_VENQT_WRITE 0x40
+
+#define RTW89_USB_RECVBUF_SZ 20480
+#define RTW89_USB_RXCB_NUM 8
+#define RTW89_USB_RX_SKB_NUM 16
+#define RTW89_USB_MAX_RXQ_LEN 512
+#define RTW89_USB_MOD512_PADDING 4
+
+#define RTW89_MAX_ENDPOINT_NUM 9
+#define RTW89_MAX_BULKOUT_NUM 7
+
+struct rtw89_usb_rx_ctrl_block {
+ struct rtw89_dev *rtwdev;
+ struct urb *rx_urb;
+ struct sk_buff *rx_skb;
+};
+
+struct rtw89_usb_tx_ctrl_block {
+ struct rtw89_dev *rtwdev;
+ struct sk_buff_head tx_ack_queue;
+};
+
+struct rtw89_usb {
+ struct rtw89_dev *rtwdev;
+ struct usb_device *udev;
+
+ __le32 *vendor_req_buf;
+
+ atomic_t continual_io_error;
+
+ u8 in_pipe;
+ u8 out_pipe[RTW89_MAX_BULKOUT_NUM];
+
+ struct workqueue_struct *rxwq;
+ struct rtw89_usb_rx_ctrl_block rx_cb[RTW89_USB_RXCB_NUM];
+ struct sk_buff_head rx_queue;
+ struct sk_buff_head rx_free_queue;
+ struct work_struct rx_work;
+ struct work_struct rx_urb_work;
+};
+
+static inline struct rtw89_usb *rtw89_usb_priv(struct rtw89_dev *rtwdev)
+{
+ return (struct rtw89_usb *)rtwdev->priv;
+}
+
+int rtw89_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id);
+void rtw89_usb_disconnect(struct usb_interface *intf);
+
+#endif
--
2.49.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH rtw-next v3 12/14] wifi: rtw89: Add usb.{c,h}
2025-06-20 19:04 ` [PATCH rtw-next v3 12/14] wifi: rtw89: Add usb.{c,h} Bitterblue Smith
@ 2025-06-23 20:08 ` Bitterblue Smith
2025-06-24 6:18 ` Ping-Ke Shih
1 sibling, 0 replies; 22+ messages in thread
From: Bitterblue Smith @ 2025-06-23 20:08 UTC (permalink / raw)
To: linux-wireless@vger.kernel.org; +Cc: Ping-Ke Shih
On 20/06/2025 22:04, Bitterblue Smith wrote:
> Add very basic USB support. No TX/RX aggregation, no TX queues,
Commit 47a498b84f01 ("wifi: rtw89: TX nulldata 0 after scan complete")
exposed a problem with my lazy "no TX queues" approach:
[30316.444515] BUG: KFENCE: use-after-free write in rtw89_core_tx_kick_off_and_wait+0xed/0x1e0 [rtw89_core]
[30316.444616] Use-after-free write at 0x00000000719224cd (in kfence-#231):
[30316.444623] rtw89_core_tx_kick_off_and_wait+0xed/0x1e0 [rtw89_core]
[30316.444716] rtw89_core_scan_complete+0x19b/0x260 [rtw89_core]
[30316.444810] rtw89_hw_scan_complete_cb+0xbb/0x150 [rtw89_core]
[30316.444906] rtw89_chanctx_proceed_cb+0x21/0x40 [rtw89_core]
[30316.444988] rtw89_chanctx_proceed+0x45/0x90 [rtw89_core]
[30316.445067] rtw89_hw_scan_complete+0x4e/0x70 [rtw89_core]
[30316.445156] rtw89_mac_c2h_scanofld_rsp+0x33a/0x380 [rtw89_core]
[30316.445241] rtw89_fw_c2h_cmd_handle+0x89/0x100 [rtw89_core]
[30316.445332] rtw89_fw_c2h_work+0x3c/0x60 [rtw89_core]
[30316.445412] cfg80211_wiphy_work+0x110/0x190 [cfg80211]
[30316.445412] process_one_work+0x190/0x350
[30316.445412] worker_thread+0x2d7/0x410
[30316.445412] kthread+0xf9/0x240
[30316.445412] ret_from_fork+0x31/0x50
[30316.445412] ret_from_fork_asm+0x1a/0x30
[30316.445412] kfence-#231: 0x0000000049346f7c-0x000000006dacad1c, size=232, cache=skbuff_head_cache
[30316.445412] allocated by task 17836 on cpu 0 at 30316.413509s (0.031903s ago):
[30316.445412] __alloc_skb+0x148/0x1a0
[30316.445412] __netdev_alloc_skb+0x38/0x190
[30316.445412] ieee80211_nullfunc_get+0x3f/0x210 [mac80211]
[30316.445412] rtw89_core_send_nullfunc+0xd2/0x190 [rtw89_core]
[30316.445412] rtw89_core_scan_complete+0x19b/0x260 [rtw89_core]
[30316.445412] rtw89_hw_scan_complete_cb+0xbb/0x150 [rtw89_core]
[30316.445412] rtw89_chanctx_proceed_cb+0x21/0x40 [rtw89_core]
[30316.445412] rtw89_chanctx_proceed+0x45/0x90 [rtw89_core]
[30316.445412] rtw89_hw_scan_complete+0x4e/0x70 [rtw89_core]
[30316.445412] rtw89_mac_c2h_scanofld_rsp+0x33a/0x380 [rtw89_core]
[30316.445412] rtw89_fw_c2h_cmd_handle+0x89/0x100 [rtw89_core]
[30316.445412] rtw89_fw_c2h_work+0x3c/0x60 [rtw89_core]
[30316.445412] cfg80211_wiphy_work+0x110/0x190 [cfg80211]
[30316.445412] process_one_work+0x190/0x350
[30316.445412] worker_thread+0x2d7/0x410
[30316.445412] kthread+0xf9/0x240
[30316.445412] ret_from_fork+0x31/0x50
[30316.445412] ret_from_fork_asm+0x1a/0x30
[30316.445412] freed by task 0 on cpu 3 at 30316.413558s (0.031854s ago):
[30316.445412] ieee80211_tx_status_skb+0x75/0xb0 [mac80211]
[30316.445412] ieee80211_handle_queued_frames+0x9f/0xd0 [mac80211]
[30316.445412] tasklet_action_common+0xc5/0x230
[30316.445412] handle_softirqs+0xe3/0x2a0
[30316.445412] __irq_exit_rcu+0xcb/0xf0
[30316.445412] common_interrupt+0x85/0xa0
[30316.445412] asm_common_interrupt+0x26/0x40
[30316.445412] cpuidle_enter_state+0xbb/0x410
[30316.445412] cpuidle_enter+0x31/0x50
[30316.445412] do_idle+0x1b1/0x210
[30316.445412] cpu_startup_entry+0x29/0x30
[30316.445412] start_secondary+0x119/0x140
[30316.445412] common_startup_64+0x13e/0x141
[30316.445412] CPU: 0 UID: 0 PID: 17836 Comm: kworker/u16:1 Tainted: G OE 6.15.1-arch1-2 #1 PREEMPT(full) cd63386364b969355862abafc710704c8116e874
[30316.445412] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[30316.445412] Hardware name: LENOVO 82KR/LNVNB161216, BIOS HBCN18WW 08/27/2021
[30316.445412] Workqueue: events_unbound cfg80211_wiphy_work [cfg80211]
rtw89_core_send_nullfunc() calls rtw89_core_tx_write_link().
rtw89_usb_ops_tx_write() transmits the frame immediately and
rtw89_usb_write_port_complete() hands it to
ieee80211_tx_status_irqsafe(). Then rtw89_core_send_nullfunc()
calls rtw89_core_tx_kick_off_and_wait(), but the nullfunc was
already freed by mac80211.
So I will add TX queues in v4.
^ permalink raw reply [flat|nested] 22+ messages in thread* RE: [PATCH rtw-next v3 12/14] wifi: rtw89: Add usb.{c,h}
2025-06-20 19:04 ` [PATCH rtw-next v3 12/14] wifi: rtw89: Add usb.{c,h} Bitterblue Smith
2025-06-23 20:08 ` Bitterblue Smith
@ 2025-06-24 6:18 ` Ping-Ke Shih
1 sibling, 0 replies; 22+ messages in thread
From: Ping-Ke Shih @ 2025-06-24 6:18 UTC (permalink / raw)
To: Bitterblue Smith, linux-wireless@vger.kernel.org
Bitterblue Smith <rtl8821cerfe2@gmail.com> wrote:
> Add very basic USB support. No TX/RX aggregation, no TX queues, no
> switching to USB 3 mode.
>
> RTL8851BU and RTL8832BU work.
>
> Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
v3 is fine to me.
Since you are going to add TX queues by v4, I don't add my Acked-by.
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH rtw-next v3 13/14] wifi: rtw89: Add rtw8851bu.c
2025-06-20 18:51 [PATCH rtw-next v3 00/14] wifi: rtw89: Add support for USB devices Bitterblue Smith
` (11 preceding siblings ...)
2025-06-20 19:04 ` [PATCH rtw-next v3 12/14] wifi: rtw89: Add usb.{c,h} Bitterblue Smith
@ 2025-06-20 19:05 ` Bitterblue Smith
2025-06-20 19:05 ` [PATCH rtw-next v3 14/14] wifi: rtw89: Enable the new USB modules Bitterblue Smith
13 siblings, 0 replies; 22+ messages in thread
From: Bitterblue Smith @ 2025-06-20 19:05 UTC (permalink / raw)
To: linux-wireless@vger.kernel.org; +Cc: Ping-Ke Shih
This is the entry point for the new rtw89_8851bu module.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
---
v2:
- Add USB ID 3625:010b for TP-Link Archer TX10UB Nano.
- Add USB ID 7392:e611 for Edimax EW-7611UXB.
v3:
- Add Acked-by.
---
.../net/wireless/realtek/rtw89/rtw8851bu.c | 39 +++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 drivers/net/wireless/realtek/rtw89/rtw8851bu.c
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8851bu.c b/drivers/net/wireless/realtek/rtw89/rtw8851bu.c
new file mode 100644
index 000000000000..c3722547c6b0
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtw89/rtw8851bu.c
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/* Copyright(c) 2025 Realtek Corporation
+ */
+
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "rtw8851b.h"
+#include "usb.h"
+
+static const struct rtw89_driver_info rtw89_8851bu_info = {
+ .chip = &rtw8851b_chip_info,
+ .variant = NULL,
+ .quirks = NULL,
+};
+
+static const struct usb_device_id rtw_8851bu_id_table[] = {
+ { USB_DEVICE_AND_INTERFACE_INFO(0x0bda, 0xb851, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&rtw89_8851bu_info },
+ /* TP-Link Archer TX10UB Nano */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x3625, 0x010b, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&rtw89_8851bu_info },
+ /* Edimax EW-7611UXB */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x7392, 0xe611, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&rtw89_8851bu_info },
+ {},
+};
+MODULE_DEVICE_TABLE(usb, rtw_8851bu_id_table);
+
+static struct usb_driver rtw_8851bu_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = rtw_8851bu_id_table,
+ .probe = rtw89_usb_probe,
+ .disconnect = rtw89_usb_disconnect,
+};
+module_usb_driver(rtw_8851bu_driver);
+
+MODULE_AUTHOR("Bitterblue Smith <rtl8821cerfe2@gmail.com>");
+MODULE_DESCRIPTION("Realtek 802.11ax wireless 8851BU driver");
+MODULE_LICENSE("Dual BSD/GPL");
--
2.49.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH rtw-next v3 14/14] wifi: rtw89: Enable the new USB modules
2025-06-20 18:51 [PATCH rtw-next v3 00/14] wifi: rtw89: Add support for USB devices Bitterblue Smith
` (12 preceding siblings ...)
2025-06-20 19:05 ` [PATCH rtw-next v3 13/14] wifi: rtw89: Add rtw8851bu.c Bitterblue Smith
@ 2025-06-20 19:05 ` Bitterblue Smith
13 siblings, 0 replies; 22+ messages in thread
From: Bitterblue Smith @ 2025-06-20 19:05 UTC (permalink / raw)
To: linux-wireless@vger.kernel.org; +Cc: Ping-Ke Shih
Enable compilation of the new rtw89_usb and rtw89_8851bu modules.
Tested mostly in station mode, and a little bit in AP mode.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
---
v2:
- Add Acked-by.
- Add more information in the commit message.
v3:
- No change.
---
drivers/net/wireless/realtek/rtw89/Kconfig | 14 ++++++++++++++
drivers/net/wireless/realtek/rtw89/Makefile | 6 ++++++
2 files changed, 20 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw89/Kconfig b/drivers/net/wireless/realtek/rtw89/Kconfig
index 205d7ecca7d7..bd180f3369c3 100644
--- a/drivers/net/wireless/realtek/rtw89/Kconfig
+++ b/drivers/net/wireless/realtek/rtw89/Kconfig
@@ -17,6 +17,9 @@ config RTW89_CORE
config RTW89_PCI
tristate
+config RTW89_USB
+ tristate
+
config RTW89_8851B
tristate
@@ -49,6 +52,17 @@ config RTW89_8851BE
802.11ax PCIe wireless network (Wi-Fi 6) adapter
+config RTW89_8851BU
+ tristate "Realtek 8851BU USB wireless network (Wi-Fi 6) adapter"
+ depends on USB
+ select RTW89_CORE
+ select RTW89_USB
+ select RTW89_8851B
+ help
+ Select this option will enable support for 8851BU chipset
+
+ 802.11ax USB wireless network (Wi-Fi 6) adapter
+
config RTW89_8852AE
tristate "Realtek 8852AE PCI wireless network (Wi-Fi 6) adapter"
depends on PCI
diff --git a/drivers/net/wireless/realtek/rtw89/Makefile b/drivers/net/wireless/realtek/rtw89/Makefile
index c751013e811e..891e2d55c335 100644
--- a/drivers/net/wireless/realtek/rtw89/Makefile
+++ b/drivers/net/wireless/realtek/rtw89/Makefile
@@ -31,6 +31,9 @@ rtw89_8851b-objs := rtw8851b.o \
obj-$(CONFIG_RTW89_8851BE) += rtw89_8851be.o
rtw89_8851be-objs := rtw8851be.o
+obj-$(CONFIG_RTW89_8851BU) += rtw89_8851bu.o
+rtw89_8851bu-objs := rtw8851bu.o
+
obj-$(CONFIG_RTW89_8852A) += rtw89_8852a.o
rtw89_8852a-objs := rtw8852a.o \
rtw8852a_table.o \
@@ -81,3 +84,6 @@ rtw89_core-$(CONFIG_RTW89_DEBUG) += debug.o
obj-$(CONFIG_RTW89_PCI) += rtw89_pci.o
rtw89_pci-y := pci.o pci_be.o
+obj-$(CONFIG_RTW89_USB) += rtw89_usb.o
+rtw89_usb-y := usb.o
+
--
2.49.0
^ permalink raw reply related [flat|nested] 22+ messages in thread