Fix for sparc64 irq.c compile error

All of lore.kernel.org
 help / color / mirror / Atom feed

* Fix for sparc64 irq.c compile error
@ 2005-10-09  0:23 Sven Hartge
  2005-10-09  4:12 ` David S. Miller
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: Sven Hartge @ 2005-10-09  0:23 UTC (permalink / raw)
  To: ultralinux

[-- Attachment #1: Type: TEXT/PLAIN, Size: 553 bytes --]

Hello.

Please excuse me for contacting you so bluntly, but after some hours of 
debugging, I feel the need to contribute my little patch, in the hope it 
is somewhat helpful.

The problem: On sparc64, arch/sparc64/kernel/irq.c is missing the 
inclusion of asm/io.h, which causes readb() and writeb() to be undefined. 
Please see the attached patch for the correction.

This should also go into the -stable-series.

Grüße,
Sven Hartge

-- 
Sven Hartge -- professioneller Unix-Geek
Meine Gedanken im Netz: http://sven.formvision.de/blog/

[-- Attachment #2: Type: TEXT/PLAIN, Size: 515 bytes --]

[SPARC64]: Fix compile error in irq.c

irq.c is missing the inclusion of asm/io.h, which causes
readb() and writeb() the be undefined.

Signed-off-by: Sven Hartge <hartge@ds9.argh.org>

diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -27,6 +27,7 @@
 #include <asm/atomic.h>
 #include <asm/system.h>
 #include <asm/irq.h>
+#include <asm/io.h>
 #include <asm/sbus.h>
 #include <asm/iommu.h>
 #include <asm/upa.h>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Fix for sparc64 irq.c compile error
  2005-10-09  0:23 Fix for sparc64 irq.c compile error Sven Hartge
@ 2005-10-09  4:12 ` David S. Miller
  2005-10-09 14:54 ` Sven Hartge
  2005-10-13  4:34 ` Horms
  2 siblings, 0 replies; 7+ messages in thread
From: David S. Miller @ 2005-10-09  4:12 UTC (permalink / raw)
  To: ultralinux

From: Sven Hartge <hartge@ds9.argh.org>
Date: Sun, 9 Oct 2005 02:23:18 +0200 (CEST)

> The problem: On sparc64, arch/sparc64/kernel/irq.c is missing the 
> inclusion of asm/io.h, which causes readb() and writeb() to be undefined. 
> Please see the attached patch for the correction.
> 
> This should also go into the -stable-series.

Applied, thanks Sven.

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Fix for sparc64 irq.c compile error
  2005-10-09  0:23 Fix for sparc64 irq.c compile error Sven Hartge
  2005-10-09  4:12 ` David S. Miller
@ 2005-10-09 14:54 ` Sven Hartge
  2005-10-13  4:34 ` Horms
  2 siblings, 0 replies; 7+ messages in thread
From: Sven Hartge @ 2005-10-09 14:54 UTC (permalink / raw)
  To: ultralinux

[-- Attachment #1: Type: TEXT/PLAIN, Size: 2844 bytes --]

Um 21:12 Uhr am 08.10.05 schrieb David S. Miller:

>> The problem: On sparc64, arch/sparc64/kernel/irq.c is missing the 
>> inclusion of asm/io.h, which causes readb() and writeb() to be undefined. 
>> Please see the attached patch for the correction.
> Applied, thanks Sven.

Thank you. With this patch (and your FPU corruption fix), the 2.6.13.3 
boots and the system runs quite well (for an Ultra1), but as soon as I 
change the runlevel, the following panic dumps me back to the PROM:

----------------------------------------------------------------

The system is going down for reboot NOW!
ININUnable to handle kernel NULL pointer dereference
tsk->{mm,active_mm}->context = 0000000000000353
tsk->{mm,active_mm}->pgd = fffff8003696e000
              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/
init(495): Oops [#1]
TSTATE: 0000000011009600 TPC: 0000000000534ce4 TNPC: 0000000000534ce8 Y: 00000000    Not tainted
TPC: <tty_wakeup+0x4/0x80>
g0: fffff80037d3d420 g1: 000000000044d19c g2: 0000000000000001 g3: 0000000000000000
g4: fffff800378c1940 g5: 0000006c69627300 g6: fffff80036f44000 g7: 0000000000000001
o0: 0000000000000000 o1: fffff80037f1b1e8 o2: 0000000000000001 o3: 000000007002db4c
o4: 0000000070022080 o5: fffff800378c1940 sp: fffff80036f46d61 ret_pc: 000000000054c6ac
RPC: <uart_write_wakeup+0x2c/0x40>
l0: 000000000000000f l1: fffff8003057a0b8 l2: 00000000c0000000 l3: 000000000bea6495
l4: 0000000000000000 l5: 0000000000000001 l6: 0000000000000001 l7: 00000000701bd000
i0: 0000000000000000 i1: fffff80037f1b1e8 i2: 0000000000000001 i3: fffff80037f1b1c8
i4: fffff80037f1b1c0 i5: fffff8003057a060 i6: fffff80036f46e21 i7: 000000000044d19c
I7: <tasklet_action+0x7c/0xc0>
Caller[000000000044d19c]: tasklet_action+0x7c/0xc0
Caller[000000000044d39c]: __do_softirq+0x5c/0xe0
Caller[000000000044d464]: do_softirq+0x44/0x60
Caller[0000000000408994]: tl0_irq11+0x34/0x40
Caller[000000000046c800]: free_hot_cold_page+0x20/0x120
Caller[0000000000476b58]: unmap_vmas+0x2d8/0x6a0
Caller[00000000004799ac]: exit_mmap+0x6c/0x1c0
Caller[00000000004462cc]: mmput+0x2c/0xc0
Caller[000000000044a01c]: do_exit+0xdc/0xc80
Caller[000000000044ac18]: do_group_exit+0x58/0xa0
Caller[00000000004112d4]: linux_sparc_syscall32+0x34/0x40
Caller[00000000700f6130]: 0x700f6130
2086020 
Kernel panic - not syncing: Aiee, killing interrupt handler!
 <0>Press Stop-A (L1-A) to return to the boot prom

----------------------------------------------------------------

My .config and the bootlog is attached. I am using Debian unstable

BTW: Is this the right place to ask, or should I remail this to LKML
with [SPARC64] as subject tag?

Grüße,
Sven.

-- 
Sven Hartge -- professioneller Unix-Geek
Meine Gedanken im Netz: http://sven.formvision.de/blog/

[-- Attachment #2: Type: TEXT/PLAIN, Size: 4828 bytes --]

PROMLIB: Sun IEEE Boot Prom 3.11.1 1997/12/03 15:55
Linux version 2.6.13.3-3 (root@belldandy) (gcc version 4.0.2 (Debian 4.0.2-2)) #1 Sun Oct 9 03:21: 5 CEST 2005
ARCH: SUN4U
Ethernet address: 08:00:20:80:e5:c0
Built 1 zonelists
Kernel command line: root=/dev/sda1 ro
PID hash table entries: 2048 (order: 11, 65536 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 5, 262144 bytes)
Memory: 446824k available (2184k kernel code, 640k data, 128k init) [fffff80000000000,0000000037f4 000]
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
SYSIO: UPA portID 1f, at 000001fe00000000
sbus0: Clock 25.0 MHz
dma0: Revision 2 
dma1: Revision 2 
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Console: switching to mono PROM 80x34
zs2 at 0x000001fff1000004 (irq = 12,7e8) is a SunZilog
zs3 at 0x000001fff1000000 (irq = 12,7e8) is a SunZilog
Console: ttyS0 (SunZilog zs0)
ttyS0 at MMIO 0x0 (irq = 7342464) is a SunZilog
ttyS1 at MMIO 0x0 (irq = 7342464) is a SunZilog
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
sunlance.c:v2.02 8/24/03 Miguel de Icaza (miguel@nuclecu.unam.mx)
SunLance: using auto-carrier-detection.
eth0: LANCE 08:00:20:80:e5:c0 
esp0: IRQ 4,7e0 SCSI ID 7 Clk 40MHz CCYC=25000 CCF=8 TOut 167 NCR53C9XF(espfast)
ESP: Total of 1 ESP hosts found, 1 actually in use.
scsi0 : Sparc ESP100A-FAST
  Vendor: SEAGATE   Model: ST15230W SUN4.2G  Rev: 0738
  Type:   Direct-Access                      ANSI SCSI revision: 02
esp0: target 0 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sda: 8386733 512-byte hdwr sectors (4294 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 8386733 512-byte hdwr sectors (4294 MB)
SCSI device sda: drive cache: write through
 sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
rtc_sun_init: Registered Mostek RTC driver.
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 65536 bytes)
TCP established hash table entries: 32768 (order: 5, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 262144 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
input: Sun Mouse on zs/serio1
Failed to mount /selinux/: No such file or directory
INIT: version 2.86 booting
Activating swap...
Adding 106904k swap on /dev/sda2.  Priority:-1 extents:1
.
Checking root file system.../dev/sda1: clean, 67989/510976 files, 290005/1020600 blocks
.
EXT3 FS on sda1, internal journal
Cleaning up ifupdown...done.
Calculating module dependencies...done.
Loading modules...
All modules loaded.
Setting the System Clock using the Hardware Clock as reference
System Clock set. Local time: Sun Oct  9 14:44:54 UTC 2005
.
Checking all file systems....
Setting kernel variables ...
... done.
Mounting local filesystems... failed!
Cleaning /tmp....
Cleaning /var/run ....
Cleaning /var/lock ....
Setting up networking...done.
* /etc/network/options is deprecated.
Setting up IP spoofing protection...done (rp_filter).
Configuring network interfaces...eth0: Carrier Lost, trying TPE
done.
Starting portmap daemon: portmap.
Loading the saved-state of the serial devices... 
Setting the System Clock using the Hardware Clock as reference
System Clock set. Local time: Sun Oct  9 14:45:00 UTC 2005
.
Initializing random number generator....
Setting auINIT: Entering runlevel: 2
Starting system log daemon: syslogdprocess `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
.
Starting kernel log daemon: klogd.
Not starting portmap daemon.  Already running.
Starting MTA: exim4.
Starting internet superserver: inetd.
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
Not starting NFS kernel daemon: No exports.
Starting OpenBSD Secure Shell server: sshd.
Starting NFS common utilities: statd.
Running ntpdate to synchronize clock.
Starting NTP server: ntpd.
Starting anac(h)ronistic cron: anacron.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: cron.

Debian GNU/Linux testing/unstable belldandy ttyS0

belldandy login:

[-- Attachment #3: Type: TEXT/PLAIN, Size: 16267 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13.3-3
# Sun Oct  9 02:08:25 2005
#
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_SPARC64_PAGE_SIZE_8KB=y
# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
# CONFIG_SPARC64_PAGE_SIZE_512KB is not set
# CONFIG_SPARC64_PAGE_SIZE_4MB is not set
CONFIG_SECCOMP=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_SYSVIPC_COMPAT=y

#
# General machine setup
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_CPU_FREQ is not set
CONFIG_SPARC64=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
CONFIG_SUN_AUXIO=y
CONFIG_SUN_IO=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
CONFIG_SUN_OPENPROMFS=y
CONFIG_SPARC32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_UID16=y
CONFIG_BINFMT_ELF32=y
CONFIG_BINFMT_AOUT32=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_SUNOS_EMUL=y
CONFIG_SOLARIS_EMUL=y

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_SUNBPP=m
CONFIG_PARPORT_1284=y
CONFIG_PRINTER=m
# CONFIG_PPDEV is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_RAW=m

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set

#
# Graphics support
#
# CONFIG_FB is not set

#
# Console display driver support
#
CONFIG_PROM_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y

#
# Serial drivers
#

#
# Non-8250 serial port support
#
CONFIG_SERIAL_SUNCORE=y
CONFIG_SERIAL_SUNZILOG=y
CONFIG_SERIAL_SUNZILOG_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y

#
# Misc Linux/SPARC drivers
#
CONFIG_SUN_OPENPROMIO=y
CONFIG_SUN_MOSTEK_RTC=y
CONFIG_OBP_FLASH=m
# CONFIG_SUN_BPP is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_QLOGICPTI is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SUNESP=y

#
# Fibre Channel support
#
# CONFIG_FC4 is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# IEEE 1394 (FireWire) support
#

#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SUNLANCE=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNBMAC=y
CONFIG_SUNQE=y

#
# Ethernet (1000 Mbit)
#
# CONFIG_MYRI_SBUS is not set

#
# Ethernet (10000 Mbit)
#

#
# Token Ring devices
#

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Unix98 PTY support
#
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256

#
# XFree86 DRI support
#
# CONFIG_DRM is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# I2C support
#
# CONFIG_I2C is not set
# CONFIG_I2C_SENSOR is not set

#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVPTS_FS_XATTR=y
# CONFIG_DEVPTS_FS_SECURITY is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_SECURITY is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SUN_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# InfiniBand support
#

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_DCFLUSH is not set
# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_BOOTMEM is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Hardware crypto devices
#

#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Fix for sparc64 irq.c compile error
  2005-10-09  0:23 Fix for sparc64 irq.c compile error Sven Hartge
  2005-10-09  4:12 ` David S. Miller
  2005-10-09 14:54 ` Sven Hartge
@ 2005-10-13  4:34 ` Horms
  2 siblings, 0 replies; 7+ messages in thread
From: Horms @ 2005-10-13  4:34 UTC (permalink / raw)
  To: ultralinux

Sven Hartge <hartge <at> ds9.argh.org> writes:

> 
> Hello.
> 
> Please excuse me for contacting you so bluntly, but after some hours of 
> debugging, I feel the need to contribute my little patch, in the hope it 
> is somewhat helpful.
> 
> The problem: On sparc64, arch/sparc64/kernel/irq.c is missing the 
> inclusion of asm/io.h, which causes readb() and writeb() to be undefined. 
> Please see the attached patch for the correction.
> 
> This should also go into the -stable-series.

Given that this patch has been queued for stable it caught my
eye for possible inclusion in Debian packages. But if I'm not
mistaken its just a build cleanup. Certainly the Debian kernels
do seem to build, well possibly with the exception of the 2.6.13
variant. Could someone shed some light on if a particular config
option is needed to show this problem and if it is only
a >= 2.6.13 problem?

Thanks

-- 
Horms

P.S: Sorry if this mail turns out poorly, I'm experimenting
with posting using gmane as I'm not on the list. Ohh, and
please CC me on replies.

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Fix for sparc64 irq.c compile error
@ 2005-10-10  3:24 David S. Miller
  2005-10-10  6:20 ` Sven Hartge
  2005-10-10 18:11 ` David S. Miller
  0 siblings, 2 replies; 7+ messages in thread
From: David S. Miller @ 2005-10-10  3:24 UTC (permalink / raw)
  To: sparclinux

From: Sven Hartge <hartge@ds9.argh.org>
Date: Sun, 9 Oct 2005 16:54:01 +0200 (CEST)

[ Please use sparclinux, you'll reach more Sparc users there.
  ultralinux ought to be deprecated at some point since there
  is zero traffic level justification for two lists these days ]

> init(495): Oops [#1]
> TSTATE: 0000000011009600 TPC: 0000000000534ce4 TNPC: 0000000000534ce8 Y: 00000000    Not tainted
> TPC: <tty_wakeup+0x4/0x80>

Known problem with serial console, I mean to get to fixing it
at some point.

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Fix for sparc64 irq.c compile error
  2005-10-10  3:24 David S. Miller
@ 2005-10-10  6:20 ` Sven Hartge
  2005-10-10 18:11 ` David S. Miller
  1 sibling, 0 replies; 7+ messages in thread
From: Sven Hartge @ 2005-10-10  6:20 UTC (permalink / raw)
  To: sparclinux

Um 20:24 Uhr am 09.10.05 schrieb David S. Miller:

>> init(495): Oops [#1]
>> TSTATE: 0000000011009600 TPC: 0000000000534ce4 TNPC: 0000000000534ce8 Y: 00000000    Not tainted
>> TPC: <tty_wakeup+0x4/0x80>
 
> Known problem with serial console, I mean to get to fixing it
> at some point.

The Debian variant of 2.6.12 works fine and does shutdown correct. I have 
yet to check, if they include any patch to solve this issue or if only 
2.6.13 and higher are affected.

Grüße,
Sven.

-- 
Sven Hartge -- professioneller Unix-Geek
Meine Gedanken im Netz: http://sven.formvision.de/blog/

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Fix for sparc64 irq.c compile error
  2005-10-10  3:24 David S. Miller
  2005-10-10  6:20 ` Sven Hartge
@ 2005-10-10 18:11 ` David S. Miller
  1 sibling, 0 replies; 7+ messages in thread
From: David S. Miller @ 2005-10-10 18:11 UTC (permalink / raw)
  To: sparclinux

From: Sven Hartge <hartge@ds9.argh.org>
Date: Mon, 10 Oct 2005 08:20:37 +0200 (CEST)

> The Debian variant of 2.6.12 works fine and does shutdown correct. I have 
> yet to check, if they include any patch to solve this issue or if only 
> 2.6.13 and higher are affected.

I believe they have a hack workaround that checks for a NULL tty in
the wakeup routine, it's the wrong fix.

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2005-10-13  4:34 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-10-09  0:23 Fix for sparc64 irq.c compile error Sven Hartge
2005-10-09  4:12 ` David S. Miller
2005-10-09 14:54 ` Sven Hartge
2005-10-13  4:34 ` Horms
  -- strict thread matches above, loose matches on Subject: below --
2005-10-10  3:24 David S. Miller
2005-10-10  6:20 ` Sven Hartge
2005-10-10 18:11 ` David S. Miller

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.