diff for duplicates of <e09ea99753ce59e4b595ba3ecab36c8a@codeaurora.org> diff --git a/a/1.txt b/N1/1.txt index 3fe570e..822b8d8 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -42,16 +42,16 @@ On 2018-03-16 15:08, Sricharan R wrote: > + > + soc { -> + pcie0: pci@40000000 { +> + pcie0: pci at 40000000 { > + status = "ok"; > + perst-gpio = <&tlmm 38 0x1>; > + }; > + -> + spi_1: spi@78b6000 { /* BLSP1 QUP2 */ +> + spi_1: spi at 78b6000 { /* BLSP1 QUP2 */ > + status = "ok"; > + }; > + -> + pinctrl@1000000 { +> + pinctrl at 1000000 { > + serial_1_pins: serial1_pinmux { > + mux { > + pins = "gpio8", "gpio9", @@ -76,19 +76,19 @@ On 2018-03-16 15:08, Sricharan R wrote: > + }; > + }; > + -> + serial@78b0000 { +> + serial at 78b0000 { > + pinctrl-0 = <&serial_1_pins>; > + pinctrl-names = "default"; > + status = "ok"; > + }; > + -> + spi_0: spi@78b5000 { /* BLSP1 QUP1 */ +> + spi_0: spi at 78b5000 { /* BLSP1 QUP1 */ > + pinctrl-0 = <&spi_0_pins>; > + pinctrl-names = "default"; > + status = "ok"; > + cs-gpios = <&tlmm 12 0>; > + -> + m25p80@0 { +> + m25p80 at 0 { > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0>; diff --git a/a/content_digest b/N1/content_digest index f3abe71..921d623 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,24 +1,9 @@ "ref\01521193101-4586-1-git-send-email-sricharan@codeaurora.org\0" "ref\01521193101-4586-10-git-send-email-sricharan@codeaurora.org\0" - "From\0Abhishek Sahu <absahu@codeaurora.org>\0" - "Subject\0Re: [PATCH v2 09/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file\0" + "From\0absahu@codeaurora.org (Abhishek Sahu)\0" + "Subject\0[PATCH v2 09/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file\0" "Date\0Fri, 16 Mar 2018 15:55:24 +0530\0" - "To\0Sricharan R <sricharan@codeaurora.org>\0" - "Cc\0robh+dt@kernel.org" - robh@kernel.org - mark.rutland@arm.com - linux@armlinux.org.uk - andy.gross@linaro.org - david.brown@linaro.org - catalin.marinas@arm.com - will.deacon@arm.com - sboyd@codeaurora.org - bjorn.andersson@linaro.org - devicetree@vger.kernel.org - linux-kernel@vger.kernel.org - linux-arm-kernel@lists.infradead.org - linux-arm-msm@vger.kernel.org - " linux-soc@vger.kernel.org\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "On 2018-03-16 15:08, Sricharan R wrote:\n" @@ -65,16 +50,16 @@ "\n" "> +\n" "> +\tsoc {\n" - "> +\t\tpcie0: pci@40000000 {\n" + "> +\t\tpcie0: pci at 40000000 {\n" "> +\t\t\tstatus = \"ok\";\n" "> +\t\t\tperst-gpio = <&tlmm 38 0x1>;\n" "> +\t\t};\n" "> +\n" - "> +\t\tspi_1: spi@78b6000 { /* BLSP1 QUP2 */\n" + "> +\t\tspi_1: spi at 78b6000 { /* BLSP1 QUP2 */\n" "> +\t\t\tstatus = \"ok\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tpinctrl@1000000 {\n" + "> +\t\tpinctrl at 1000000 {\n" "> +\t\t\tserial_1_pins: serial1_pinmux {\n" "> +\t\t\t\tmux {\n" "> +\t\t\t\t\tpins = \"gpio8\", \"gpio9\",\n" @@ -99,19 +84,19 @@ "> +\t\t\t};\n" "> +\t\t};\n" "> +\n" - "> +\t\tserial@78b0000 {\n" + "> +\t\tserial at 78b0000 {\n" "> +\t\t\tpinctrl-0 = <&serial_1_pins>;\n" "> +\t\t\tpinctrl-names = \"default\";\n" "> +\t\t\tstatus = \"ok\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tspi_0: spi@78b5000 { /* BLSP1 QUP1 */\n" + "> +\t\tspi_0: spi at 78b5000 { /* BLSP1 QUP1 */\n" "> +\t\t\tpinctrl-0 = <&spi_0_pins>;\n" "> +\t\t\tpinctrl-names = \"default\";\n" "> +\t\t\tstatus = \"ok\";\n" "> +\t\t\tcs-gpios = <&tlmm 12 0>;\n" "> +\n" - "> +\t\t\tm25p80@0 {\n" + "> +\t\t\tm25p80 at 0 {\n" "> +\t\t\t\t#address-cells = <1>;\n" "> +\t\t\t\t#size-cells = <1>;\n" "> +\t\t\t\treg = <0>;\n" @@ -122,4 +107,4 @@ "> +\t};\n" > +}; -868676909815891eed47385e089babef0648681139b0e45fa05f3fcb1aee611c +05093ebdc4d6a2c44a2f1665ac339c3abd3322c655134a806e32ab2ade275b6d
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.