From: Abhishek Sahu <absahu@codeaurora.org>
To: Sricharan R <sricharan@codeaurora.org>
Cc: robh+dt@kernel.org, robh@kernel.org, mark.rutland@arm.com,
linux@armlinux.org.uk, andy.gross@linaro.org,
david.brown@linaro.org, catalin.marinas@arm.com,
will.deacon@arm.com, sboyd@codeaurora.org,
bjorn.andersson@linaro.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org
Subject: Re: [PATCH v2 09/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file
Date: Fri, 16 Mar 2018 15:55:24 +0530 [thread overview]
Message-ID: <e09ea99753ce59e4b595ba3ecab36c8a@codeaurora.org> (raw)
In-Reply-To: <1521193101-4586-10-git-send-email-sricharan@codeaurora.org>
On 2018-03-16 15:08, Sricharan R wrote:
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 65
> +++++++++++++++++++++++++
> 2 files changed, 66 insertions(+)
> create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index b71487a..8c93fd0 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -749,6 +749,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
> qcom-ipq4019-ap.dk01.1-c1.dtb \
> qcom-ipq4019-ap.dk04.1-c1.dtb \
> qcom-ipq4019-ap.dk04.1-c3.dtb \
> + qcom-ipq4019-ap.dk07.1-c1.dtb \
> qcom-ipq8064-ap148.dtb \
> qcom-msm8660-surf.dtb \
> qcom-msm8960-cdp.dtb \
> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
> b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
> new file mode 100644
> index 0000000..4562f7f
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
> @@ -0,0 +1,65 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018, The Linux Foundation. All rights reserved.
> +
> +#include "qcom-ipq4019-ap.dk07.1.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK07.1-C1";
s/IPQ40xx/IPQ4019
with that.
Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
> +
> + soc {
> + pcie0: pci@40000000 {
> + status = "ok";
> + perst-gpio = <&tlmm 38 0x1>;
> + };
> +
> + spi_1: spi@78b6000 { /* BLSP1 QUP2 */
> + status = "ok";
> + };
> +
> + pinctrl@1000000 {
> + serial_1_pins: serial1_pinmux {
> + mux {
> + pins = "gpio8", "gpio9",
> + "gpio10", "gpio11";
> + function = "blsp_uart1";
> + bias-disable;
> + };
> + };
> +
> + spi_0_pins: spi_0_pinmux {
> + pinmux {
> + function = "blsp_spi0";
> + pins = "gpio13", "gpio14", "gpio15";
> + bias-disable;
> + };
> + pinmux_cs {
> + function = "gpio";
> + pins = "gpio12";
> + bias-disable;
> + output-high;
> + };
> + };
> + };
> +
> + serial@78b0000 {
> + pinctrl-0 = <&serial_1_pins>;
> + pinctrl-names = "default";
> + status = "ok";
> + };
> +
> + spi_0: spi@78b5000 { /* BLSP1 QUP1 */
> + pinctrl-0 = <&spi_0_pins>;
> + pinctrl-names = "default";
> + status = "ok";
> + cs-gpios = <&tlmm 12 0>;
> +
> + m25p80@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0>;
> + compatible = "n25q128a11";
> + spi-max-frequency = <24000000>;
> + };
> + };
> + };
> +};
WARNING: multiple messages have this Message-ID (diff)
From: absahu@codeaurora.org (Abhishek Sahu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 09/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file
Date: Fri, 16 Mar 2018 15:55:24 +0530 [thread overview]
Message-ID: <e09ea99753ce59e4b595ba3ecab36c8a@codeaurora.org> (raw)
In-Reply-To: <1521193101-4586-10-git-send-email-sricharan@codeaurora.org>
On 2018-03-16 15:08, Sricharan R wrote:
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 65
> +++++++++++++++++++++++++
> 2 files changed, 66 insertions(+)
> create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index b71487a..8c93fd0 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -749,6 +749,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
> qcom-ipq4019-ap.dk01.1-c1.dtb \
> qcom-ipq4019-ap.dk04.1-c1.dtb \
> qcom-ipq4019-ap.dk04.1-c3.dtb \
> + qcom-ipq4019-ap.dk07.1-c1.dtb \
> qcom-ipq8064-ap148.dtb \
> qcom-msm8660-surf.dtb \
> qcom-msm8960-cdp.dtb \
> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
> b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
> new file mode 100644
> index 0000000..4562f7f
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
> @@ -0,0 +1,65 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018, The Linux Foundation. All rights reserved.
> +
> +#include "qcom-ipq4019-ap.dk07.1.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK07.1-C1";
s/IPQ40xx/IPQ4019
with that.
Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
> +
> + soc {
> + pcie0: pci at 40000000 {
> + status = "ok";
> + perst-gpio = <&tlmm 38 0x1>;
> + };
> +
> + spi_1: spi at 78b6000 { /* BLSP1 QUP2 */
> + status = "ok";
> + };
> +
> + pinctrl at 1000000 {
> + serial_1_pins: serial1_pinmux {
> + mux {
> + pins = "gpio8", "gpio9",
> + "gpio10", "gpio11";
> + function = "blsp_uart1";
> + bias-disable;
> + };
> + };
> +
> + spi_0_pins: spi_0_pinmux {
> + pinmux {
> + function = "blsp_spi0";
> + pins = "gpio13", "gpio14", "gpio15";
> + bias-disable;
> + };
> + pinmux_cs {
> + function = "gpio";
> + pins = "gpio12";
> + bias-disable;
> + output-high;
> + };
> + };
> + };
> +
> + serial at 78b0000 {
> + pinctrl-0 = <&serial_1_pins>;
> + pinctrl-names = "default";
> + status = "ok";
> + };
> +
> + spi_0: spi at 78b5000 { /* BLSP1 QUP1 */
> + pinctrl-0 = <&spi_0_pins>;
> + pinctrl-names = "default";
> + status = "ok";
> + cs-gpios = <&tlmm 12 0>;
> +
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0>;
> + compatible = "n25q128a11";
> + spi-max-frequency = <24000000>;
> + };
> + };
> + };
> +};
next prev parent reply other threads:[~2018-03-16 10:25 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-16 9:38 [PATCH v2 00/13] ARM: dts: ipq: updates to enable a few peripherals Sricharan R
2018-03-16 9:38 ` Sricharan R
2018-03-16 9:38 ` [PATCH v2 01/13] firmware: qcom: scm: Add ipq4019 soc compatible Sricharan R
2018-03-16 9:38 ` Sricharan R
2018-03-16 9:38 ` [PATCH v2 02/13] ARM: dts: ipq4019: Add a few peripheral nodes Sricharan R
2018-03-16 9:38 ` Sricharan R
2018-03-16 10:17 ` Abhishek Sahu
2018-03-16 10:17 ` Abhishek Sahu
2018-03-16 11:29 ` Abhishek Sahu
2018-03-16 11:29 ` Abhishek Sahu
2018-03-16 12:17 ` Marc Zyngier
2018-03-16 12:17 ` Marc Zyngier
2018-03-16 12:40 ` Sricharan R
2018-03-16 12:40 ` Sricharan R
2018-03-16 9:38 ` [PATCH v2 03/13] ARM: dts: ipq4019: Change the max opp frequency Sricharan R
2018-03-16 9:38 ` Sricharan R
2018-03-16 10:19 ` Abhishek Sahu
2018-03-16 10:19 ` Abhishek Sahu
2018-03-16 10:19 ` Abhishek Sahu
2018-03-16 9:38 ` [PATCH v2 04/13] ARM: dts: ipq4019: Update ipq4019-dk01.1 board data Sricharan R
2018-03-16 9:38 ` Sricharan R
2018-03-16 10:20 ` Abhishek Sahu
2018-03-16 10:20 ` Abhishek Sahu
2018-03-16 9:38 ` [PATCH v2 05/13] ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi Sricharan R
2018-03-16 9:38 ` Sricharan R
2018-03-16 10:21 ` Abhishek Sahu
2018-03-16 10:21 ` Abhishek Sahu
2018-03-16 9:38 ` [PATCH v2 06/13] ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file Sricharan R
2018-03-16 9:38 ` Sricharan R
2018-03-16 10:21 ` Abhishek Sahu
2018-03-16 10:21 ` Abhishek Sahu
2018-03-16 9:38 ` [PATCH v2 07/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 " Sricharan R
2018-03-16 9:38 ` Sricharan R
2018-03-16 10:22 ` Abhishek Sahu
2018-03-16 10:22 ` Abhishek Sahu
2018-03-16 9:38 ` [PATCH v2 08/13] ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data Sricharan R
2018-03-16 9:38 ` Sricharan R
2018-03-16 10:22 ` Abhishek Sahu
2018-03-16 10:22 ` Abhishek Sahu
2018-03-16 9:38 ` [PATCH v2 09/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file Sricharan R
2018-03-16 9:38 ` Sricharan R
2018-03-16 10:25 ` Abhishek Sahu [this message]
2018-03-16 10:25 ` Abhishek Sahu
2018-03-16 12:45 ` Sricharan R
2018-03-16 12:45 ` Sricharan R
2018-03-16 9:38 ` [PATCH v2 10/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 " Sricharan R
2018-03-16 9:38 ` Sricharan R
2018-03-16 10:27 ` Abhishek Sahu
2018-03-16 10:27 ` Abhishek Sahu
2018-03-16 9:38 ` [PATCH v2 11/13] ARM: dts: ipq8074: Add peripheral nodes Sricharan R
2018-03-16 9:38 ` Sricharan R
2018-03-16 10:47 ` Abhishek Sahu
2018-03-16 10:47 ` Abhishek Sahu
2018-03-16 12:43 ` Sricharan R
2018-03-16 12:43 ` Sricharan R
2018-03-16 9:38 ` [PATCH v2 12/13] ARM: dts: ipq8074: Add pcie nodes Sricharan R
2018-03-16 9:38 ` Sricharan R
2018-03-16 11:20 ` Abhishek Sahu
2018-03-16 11:20 ` Abhishek Sahu
2018-03-16 12:42 ` Sricharan R
2018-03-16 12:42 ` Sricharan R
2018-03-16 9:38 ` [PATCH v2 13/13] ARM: dts: ipq8074: Enable few peripherals for hk01 board Sricharan R
2018-03-16 9:38 ` Sricharan R
2018-03-16 10:57 ` Abhishek Sahu
2018-03-16 10:57 ` Abhishek Sahu
2018-03-16 12:43 ` Sricharan R
2018-03-16 12:43 ` Sricharan R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e09ea99753ce59e4b595ba3ecab36c8a@codeaurora.org \
--to=absahu@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=sricharan@codeaurora.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.