From: "Shankar, Uma" <uma.shankar@intel.com>
To: "Souza, Jose" <jose.souza@intel.com>,
"intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>
Subject: Re: [Intel-gfx] [v4 1/2] drm/i915/display/tgl: Disable FBC with PSR2
Date: Tue, 1 Dec 2020 16:00:17 +0000 [thread overview]
Message-ID: <e5319acc210348b9aa4e2697295be824@intel.com> (raw)
In-Reply-To: <7bb7468a0b8f43258d7e01a64fee31f682fd5737.camel@intel.com>
> -----Original Message-----
> From: Souza, Jose <jose.souza@intel.com>
> Sent: Tuesday, December 1, 2020 9:25 PM
> To: Shankar, Uma <uma.shankar@intel.com>; intel-gfx@lists.freedesktop.org
> Cc: ville.syrjala@linux.intel.com
> Subject: Re: [v4 1/2] drm/i915/display/tgl: Disable FBC with PSR2
>
> On Tue, 2020-12-01 at 07:51 -0800, José Roberto de Souza wrote:
> > On Tue, 2020-12-01 at 20:00 +0530, Uma Shankar wrote:
> > > There are some corner cases wrt underrun when we enable FBC with
> > > PSR2 on TGL. Recommendation from hardware is to keep this
> > > combination disabled.
> > >
> > > Bspec: 50422 HSD: 14010260002
> > >
> > > v2: Added psr2 enabled check from crtc_state (Anshuman) Added Bspec
> > > link and HSD referneces (Jose)
> > >
> > > v3: Moved the logic to disable fbc to intel_fbc_update_state_cache
> > > and removed the crtc->config usages, as per Ville's recommendation.
> > >
> > > v4: Introduced a variable in fbc state_cache instead of the earlier
> > > plane.visible WA, as suggested by Jose.
> > >
> > > Signed-off-by: Uma Shankar <uma.shankar@intel.com>
> > > ---
> > > drivers/gpu/drm/i915/display/intel_fbc.c | 29 ++++++++++++++++++++++++
> > > drivers/gpu/drm/i915/i915_drv.h | 1 +
> > > 2 files changed, 30 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_fbc.c
> > > b/drivers/gpu/drm/i915/display/intel_fbc.c
> > > index a5b072816a7b..ff2f2c00a10e 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_fbc.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_fbc.c
> > > @@ -700,7 +700,21 @@ static void intel_fbc_update_state_cache(struct
> intel_crtc *crtc,
> > > struct intel_fbc_state_cache *cache = &fbc->state_cache;
> > > struct drm_framebuffer *fb = plane_state->hw.fb;
> > >
> > >
> > >
> > >
> > > + if (crtc_state->has_psr2)
> > > + cache->psr2_active = true;
> > > + else
> > > + cache->psr2_active = false;
> >
> > cache->psr2_active = crtc_state->has_psr2;
Yeah sure, will update this.
> >
> > > +
> > > + /*
> > > + * Tigerlake is not supporting FBC with PSR2.
> > > + * Recommendation is to keep this combination disabled
> > > + * Bspec: 50422 HSD: 14010260002
> > > + */
> > > + if (IS_TIGERLAKE(dev_priv) && cache->psr2_active)
> > > + return;
> >
> >
> > Here you should only set psr2_active, add it to the bottom of
> intel_fbc_update_state_cache.
> > The check should only be done in intel_fbc_can_activate().
Ok, I will drop the explicit return here.
> > > +
> > > cache->plane.visible = plane_state->uapi.visible;
> > > +
> > > if (!cache->plane.visible)
> > > return;
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > @@ -799,6 +813,16 @@ static bool intel_fbc_can_activate(struct intel_crtc
> *crtc)
> > > struct intel_fbc *fbc = &dev_priv->fbc;
> > > struct intel_fbc_state_cache *cache = &fbc->state_cache;
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > + /*
> > > + * Tigerlake is not supporting FBC with PSR2.
> > > + * Recommendation is to keep this combination disabled
> > > + * Bspec: 50422 HSD: 14010260002
> > > + */
> > > + if (fbc->state_cache.psr2_active && IS_TIGERLAKE(dev_priv)) {
> > > + fbc->no_fbc_reason = "not supported with PSR2";
> > > + return false;
> > > + }
> > > +
> > > if (!intel_fbc_can_enable(dev_priv))
> > > return false;
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > @@ -1273,6 +1297,11 @@ void intel_fbc_enable(struct intel_atomic_state
> *state,
> > > if (!cache->plane.visible)
> > > goto out;
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > + if (fbc->state_cache.psr2_active && IS_TIGERLAKE(dev_priv)) {
> > > + fbc->no_fbc_reason = "not supported with PSR2";
> > > + goto out;
> > > + }
>
> Also no need to check it here, only in intel_fbc_can_activate.
> We already allocate the cfb even when other reasons do not allow FBC to be
> activated.
Ok got it, will drop the check here as well.
Thanks Jose for the feedback, will re-send the next version with updates.
Regards,
Uma Shankar
> > > +
> > > if (intel_fbc_alloc_cfb(dev_priv,
> > > intel_fbc_calculate_cfb_size(dev_priv, cache),
> > > plane_state->hw.fb->format->cpp[0])) { diff --git
> > > a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > > index 15be8debae54..f4e08c1a5867 100644
> > > --- a/drivers/gpu/drm/i915/i915_drv.h
> > > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > > @@ -416,6 +416,7 @@ struct intel_fbc {
> > > u16 gen9_wa_cfb_stride;
> > > u16 interval;
> > > s8 fence_id;
> > > + bool psr2_active;
> > > } state_cache;
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > /*
> >
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-12-01 16:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-01 14:30 [Intel-gfx] [v4 0/2] Re-enable FBC on TGL Uma Shankar
2020-12-01 14:30 ` [Intel-gfx] [v4 1/2] drm/i915/display/tgl: Disable FBC with PSR2 Uma Shankar
2020-12-01 15:51 ` Souza, Jose
2020-12-01 15:55 ` Souza, Jose
2020-12-01 16:00 ` Shankar, Uma [this message]
2020-12-01 14:30 ` [Intel-gfx] [v4 2/2] Revert "drm/i915/display/fbc: Disable fbc by default on TGL" Uma Shankar
2020-12-01 14:39 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for Re-enable FBC on TGL (rev4) Patchwork
2020-12-01 15:08 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-12-01 18:36 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e5319acc210348b9aa4e2697295be824@intel.com \
--to=uma.shankar@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jose.souza@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.