Re: [PATCH v1 0/3] StarFive's SDIO/eMMC driver support

[William Qiu <william.qiu@starfivetech.com>]

On 2022/12/16 17:22, Ulf Hansson wrote:
> On Fri, 16 Dec 2022 at 03:02, William Qiu <william.qiu@starfivetech.com> wrote:
>>
>>
>>
>> On 2022/12/7 21:17, William Qiu wrote:
>> > Hi,
>> >
>> > This patchset adds initial rudimentary support for the StarFive
>> > designware mobile storage host controller driver. And this driver will
>> > be used in StarFive's visionfive-v2 board. The main purpose of adding
>> > this driver is to accommodate the ultra-high speed mode of eMMC.
>> >
>> > The patch series is based on v6.1-rc5.
>> >
>> > -- William
>> >
>> > William Qiu (3):
>> >   dt-bindings: mmc: Add bindings for StarFive
>> >   mmc: starfive: Add sdio/emmc driver support
>> >   riscv: dts: starfive: Add mmc node
>> >
>> >  .../bindings/mmc/starfive,jh7110-sdio.yaml    |  71 +++++++
>> >  MAINTAINERS                                   |   6 +
>> >  .../jh7110-starfive-visionfive-v2.dts         |  25 +++
>> >  arch/riscv/boot/dts/starfive/jh7110.dtsi      |  38 ++++
>> >  drivers/mmc/host/Kconfig                      |  10 +
>> >  drivers/mmc/host/Makefile                     |   1 +
>> >  drivers/mmc/host/dw_mmc-starfive.c            | 197 ++++++++++++++++++
>> >  7 files changed, 348 insertions(+)
>> >  create mode 100644 Documentation/devicetree/bindings/mmc/starfive,jh7110-sdio.yaml
>> >  create mode 100644 drivers/mmc/host/dw_mmc-starfive.c
>> >
>> > --
>> > 2.34.1
>> >
>>
>> Hi Jaehoon/Ulf,
>>
>> Could you please help to review and provide comments on this patch series?
>> Thank you in advance.
> 
> Hi William,
> 
> Looks like you have received plenty of good comments already and there
> are a lot of things for you to update. That said, I think it makes
> better sense for me to look at the next version instead.
> 

Fine, I'll do that then.

Thanks
William Qiu

>>
>> Best regards,
>> William Qiu
> 
> Kind regards
> Uffe