Re: [PATCH] phy: qualcomm: phy-qcom-eusb2-repeater: rework reg override handler

From: Krzysztof Kozlowski <krzk@kernel.org>
To: Pengyu Luo <mitltlatltl@gmail.com>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Vinod Koul <vkoul@kernel.org>,
	Kishon Vijay Abraham I <kishon@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org
Subject: Re: [PATCH] phy: qualcomm: phy-qcom-eusb2-repeater: rework reg override handler
Date: Sun, 6 Apr 2025 14:21:47 +0200	[thread overview]
Message-ID: <e9265770-784a-4682-b3b3-bace88aef36c@kernel.org> (raw)
In-Reply-To: <20250405174319.405975-1-mitltlatltl@gmail.com>

On 05/04/2025 19:43, Pengyu Luo wrote:
> In downstream tree, many registers need to be overrided, it varies
> from devices and platforms, not only HS trasmit amplitude(0x51),
> HS disconnect threshold(0x53), Tx pre-emphasis tuning(0x57).
> 
> The device I plan to upstream also uses it, so I write the patch for
> it (Oneplus Pad Pro / Oneplus Pad 2, sm8650-mtp based).
> 
> In upstream, only Sony Xperia 1 V is using this, so fixing it for sony,
> in downstream, some crd, mtp, htk devices also use it, I have no
> such device, don't set it for them.
> 
> Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
> ---
>  .../qcom/sm8550-sony-xperia-yodo-pdx234.dts   |  5 +-
>  .../phy/qualcomm/phy-qcom-eusb2-repeater.c    | 86 +++++++++++++++----

DTS is always separate patch.

>  2 files changed, 72 insertions(+), 19 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
> index d90dc7b37..99f5fd32c 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
> @@ -673,9 +673,8 @@ cam_pwr_a_cs: cam-pwr-a-cs-state {
>  };
>  
>  &pm8550b_eusb2_repeater {
> -	qcom,tune-usb2-disc-thres = /bits/ 8 <0x6>;
> -	qcom,tune-usb2-amplitude = /bits/ 8 <0xf>;
> -	qcom,tune-usb2-preem = /bits/ 8 <0x7>;
> +	qcom,param-override-seq = <0x51 0x08 0x53 0x06 0x57 0x07>;
> +	qcom,host-param-override-seq = <0x51 0x08 0x53 0x06 0x57 0x07>;

There are no such properties.

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).
Maybe you need to update your dtschema and yamllint. Don't rely on
distro packages for dtschema and be sure you are using the latest
released dtschema.

>  	vdd18-supply = <&pm8550_l15>;
>  	vdd3-supply = <&pm8550_l5>;
>  };

...

> +
>  static int eusb2_repeater_init_vregs(struct eusb2_repeater *rptr)
>  {
>  	int num = rptr->cfg->num_vregs;
> @@ -127,20 +189,12 @@ static int eusb2_repeater_init_vregs(struct eusb2_repeater *rptr)
>  static int eusb2_repeater_init(struct phy *phy)
>  {
>  	struct eusb2_repeater *rptr = phy_get_drvdata(phy);
> -	struct device_node *np = rptr->dev->of_node;
>  	struct regmap *regmap = rptr->regmap;
>  	const u32 *init_tbl = rptr->cfg->init_tbl;
> -	u8 tune_usb2_preem = init_tbl[TUNE_USB2_PREEM];
> -	u8 tune_hsdisc = init_tbl[TUNE_HSDISC];
> -	u8 tune_iusb2 = init_tbl[TUNE_IUSB2];
>  	u32 base = rptr->base;
>  	u32 val;
>  	int ret;
>  
> -	of_property_read_u8(np, "qcom,tune-usb2-amplitude", &tune_iusb2);
> -	of_property_read_u8(np, "qcom,tune-usb2-disc-thres", &tune_hsdisc);
> -	of_property_read_u8(np, "qcom,tune-usb2-preem", &tune_usb2_preem);

NAK, that's an ABI break.

Best regards,
Krzysztof