All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hui-Ping Chen <hpchen0nvt@gmail.com>
To: Krzysztof Kozlowski <krzk@kernel.org>,
	vkoul@kernel.org, kishon@kernel.org, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 2/2] phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY
Date: Fri, 2 Aug 2024 13:01:08 +0800	[thread overview]
Message-ID: <ea046ad5-ee78-44a5-803c-a09669cb8a82@gmail.com> (raw)
In-Reply-To: <85bd5da2-312e-4d25-a4e9-afae4fedbd50@kernel.org>

Dear Krzysztof,

Thank you for your reply.



On 2024/8/1 下午 10:43, Krzysztof Kozlowski wrote:
> On 01/08/2024 07:37, Hui-Ping Chen wrote:
>> +	struct regmap *sysreg;
> Look here - iomem? No.

Yes, this is my mistake.



>> +};
>> +
>> +static int ma35_usb_phy_power_on(struct phy *phy)
>> +{
>> +	struct ma35_usb_phy *p_phy = phy_get_drvdata(phy);
>> +	unsigned int val;
>> +	int ret;
>> +
>> +	ret = clk_prepare_enable(p_phy->clk);
>> +	if (ret < 0) {
>> +		dev_err(p_phy->dev, "Failed to enable PHY clock: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	regmap_read(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, &val);
>> +	if (val & PHY0SUSPEND) {
>> +		/*
>> +		 * USB PHY0 is in operation mode already
>> +		 * make sure USB PHY 60 MHz UTMI Interface Clock ready
>> +		 */
>> +		ret = readl_poll_timeout((void __iomem *)p_phy->sysreg + MA35_SYS_REG_USBPMISCR,
> Eh, I responded to v2, not here, so repeating:
>
> sysreg is a regmap, not io address. How could it possibly work and be
> tested?!? This cannot work. Test your code *before* sending it.
>
Yes, this is my mistake. I won't reply to v2. I will reply here.


I would change 'readl_poll_timeout' to 'regmap_read_poll_timeout'.

And it has been tested OK on our platform.



> Best regards,
> Krzysztof


Best regards,

Hui-Ping Chen



-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

WARNING: multiple messages have this Message-ID (diff)
From: Hui-Ping Chen <hpchen0nvt@gmail.com>
To: Krzysztof Kozlowski <krzk@kernel.org>,
	vkoul@kernel.org, kishon@kernel.org, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 2/2] phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY
Date: Fri, 2 Aug 2024 13:01:08 +0800	[thread overview]
Message-ID: <ea046ad5-ee78-44a5-803c-a09669cb8a82@gmail.com> (raw)
In-Reply-To: <85bd5da2-312e-4d25-a4e9-afae4fedbd50@kernel.org>

Dear Krzysztof,

Thank you for your reply.



On 2024/8/1 下午 10:43, Krzysztof Kozlowski wrote:
> On 01/08/2024 07:37, Hui-Ping Chen wrote:
>> +	struct regmap *sysreg;
> Look here - iomem? No.

Yes, this is my mistake.



>> +};
>> +
>> +static int ma35_usb_phy_power_on(struct phy *phy)
>> +{
>> +	struct ma35_usb_phy *p_phy = phy_get_drvdata(phy);
>> +	unsigned int val;
>> +	int ret;
>> +
>> +	ret = clk_prepare_enable(p_phy->clk);
>> +	if (ret < 0) {
>> +		dev_err(p_phy->dev, "Failed to enable PHY clock: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	regmap_read(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, &val);
>> +	if (val & PHY0SUSPEND) {
>> +		/*
>> +		 * USB PHY0 is in operation mode already
>> +		 * make sure USB PHY 60 MHz UTMI Interface Clock ready
>> +		 */
>> +		ret = readl_poll_timeout((void __iomem *)p_phy->sysreg + MA35_SYS_REG_USBPMISCR,
> Eh, I responded to v2, not here, so repeating:
>
> sysreg is a regmap, not io address. How could it possibly work and be
> tested?!? This cannot work. Test your code *before* sending it.
>
Yes, this is my mistake. I won't reply to v2. I will reply here.


I would change 'readl_poll_timeout' to 'regmap_read_poll_timeout'.

And it has been tested OK on our platform.



> Best regards,
> Krzysztof


Best regards,

Hui-Ping Chen




  reply	other threads:[~2024-08-02  5:01 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-01  5:37 [PATCH v3 0/2] Add support for nuvoton ma35 usb2 phy Hui-Ping Chen
2024-08-01  5:37 ` Hui-Ping Chen
2024-08-01  5:37 ` [PATCH v3 1/2] dt-bindings: phy: nuvoton,ma35-usb2-phy: add new bindings Hui-Ping Chen
2024-08-01  5:37   ` Hui-Ping Chen
2024-08-01 14:40   ` Krzysztof Kozlowski
2024-08-01 14:40     ` Krzysztof Kozlowski
2024-08-01  5:37 ` [PATCH v3 2/2] phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY Hui-Ping Chen
2024-08-01  5:37   ` Hui-Ping Chen
2024-08-01  9:50   ` Markus Elfring
2024-08-01  9:50     ` Markus Elfring
2024-08-02  4:57     ` Hui-Ping Chen
2024-08-02  4:57       ` Hui-Ping Chen
2024-08-01 14:43   ` Krzysztof Kozlowski
2024-08-01 14:43     ` Krzysztof Kozlowski
2024-08-02  5:01     ` Hui-Ping Chen [this message]
2024-08-02  5:01       ` Hui-Ping Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ea046ad5-ee78-44a5-803c-a09669cb8a82@gmail.com \
    --to=hpchen0nvt@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=robh@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.