Re: [PATCH 1/2] arm64: dts: ti: k3-am62l-main: Add ADC nodes

[Vignesh Raghavendra <vigneshr@ti.com>]

On 28/09/26 09:11, Sai Sree Kartheek Adivi wrote:
> From: Judith Mendez <jm@ti.com>
> 
> AM62L has an ADC in main domain, add ADC node in the respective
> voltage domain file.
> 
> Signed-off-by: Judith Mendez <jm@ti.com>
> Signed-off-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am62l-main.dtsi | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62l-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62l-main.dtsi
> index 80615ca1e01a2..70157981aba5d 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62l-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62l-main.dtsi
> @@ -544,6 +544,24 @@ elm0: ecc@25010000 {
>  		status = "disabled";
>  	};
>  
> +	tscadc0: tscadc@28001000 {
> +		compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
> +		reg = <0x00 0x28001000 0x00 0x1000>;
> +		interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
> +		power-domains = <&scmi_pds 0>;
> +		clocks = <&scmi_clk 4>;
> +		assigned-clocks = <&scmi_clk 4>;
> +		assigned-clock-parents = <&scmi_clk 2>;
> +		assigned-clock-rates = <60000000>;
> +		clock-names = "fck";
> +		status = "disabled";
> +
> +		adc {
> +			#io-channel-cells = <1>;
> +			compatible = "ti,am654-adc", "ti,am3359-adc";

compatible goes first

> +		};
> +	};
> +
>  	gpmc0: memory-controller@3b000000 {
>  		compatible = "ti,am64-gpmc";
>  		power-domains = <&scmi_pds 37>;

-- 
Regards
Vignesh
https://ti.com/opensource