* [Buildroot] [buildroot 0000932]: make didn't run through buildroot
@ 2007-02-12 13:43 bugs at busybox.net
0 siblings, 0 replies; only message in thread
From: bugs at busybox.net @ 2007-02-12 13:43 UTC (permalink / raw)
To: buildroot
The following issue has been ASSIGNED.
======================================================================
http://busybox.net/bugs/view.php?id=932
======================================================================
Reported By: raina
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 932
Category: Architecture Specific
Reproducibility: always
Severity: crash
Priority: normal
Status: assigned
======================================================================
Date Submitted: 07-02-2006 14:27 PDT
Last Modified: 02-12-2007 05:43 PST
======================================================================
Summary: make didn't run through buildroot
Description:
I tried compiling buildroot following the instructions on
http://buildroot.uclibc.org/buildroot.html
but make didn't run through. I did:
~/buildroot$ make menuconfig
~/buildroot$ make -d 2>&1 |tee logfile
Here is some tail from the logfile (omitted lots of checking lines):
...
checking ...
checking for unistd.h... (cached) yes
updating cache ./config.cache
configure: creating ./config.status
config.status: creating Makefile
config.status: executing default-1 commands
Adding multilib support to Makefile in
/home/raina/Desktop/buildroot/toolchain_build_i586/gcc-4.0.3/zlib
multidirs=64
with_multisubdir=
Running configure in multilib subdirs 64
pwd:
/home/raina/Desktop/buildroot/toolchain_build_i586/gcc-4.0.3-final/zlib
Running configure in multilib subdir 64
pwd: /home/raina/Desktop/buildroot/toolchain_build_i586/gcc-4.0.3-final
mkdir 64
configure: creating cache ./config.cache
checking build system type... i386-pc-linux-gnu
checking ...
...
checking ...
checking whether to build static libraries... yes
creating libtool
updating cache ./config.cache
configure: loading cache ./config.cache
checking how to run the C preprocessor... gcc -m64 -E
checking for memcpy... configure: error: Link tests are not allowed after
GCC_NO_EXECUTABLES.
Reaping losing child 0x080c3838 PID 11125
make[1]: *** [configure-zlib] Error 1
Removing child 0x080c3838 PID 11125 from chain.
make[1]: Leaving directory
`/home/raina/Desktop/buildroot/toolchain_build_i586/gcc-4.0.3-final'
Reaping losing child 0x08651818 PID 9366
make: ***
[/home/raina/Desktop/buildroot/toolchain_build_i586/gcc-4.0.3-final/.compiled]
Error 2
Removing child 0x08651818 PID 9366 from chain.
======================================================================
----------------------------------------------------------------------
bernhardf - 08-28-06 03:50
----------------------------------------------------------------------
Sounds like
http://gcc.gnu.org/PR16838
----------------------------------------------------------------------
jimdigriz - 10-29-06 04:04
----------------------------------------------------------------------
Just reporting a 'me too' bug report, it is fixed when MULTILIB is turned
off though as suggested in the GCC bug report.
Any ideas how to get around it? I am building for an arm926t target with
a i386 host. Below I have attached the relevant bits from my config. In
addition when building uclibc I throw through ARCH_HAS_MMU=N,
BUILD_UCLIBC_LDSO=Y, DL_FINI_CRT_COMPAT=N and UCLIBC_MALLOC_DEBUGGING=N.
I'm using the 'buildroot-20061029' snapshot and applying the patch
mentioned in the mailing list[1]. I'm happy to be a 'test monkey' too if
people need me to do some legwork for them.
Cheers
Alex
[1] http://buildroot.uclibc.org/lists/buildroot/2006-October/000356.html
=============
alex at inskipp:~/buildroot$ grep .config -e '^[^#]'
BR2_HAVE_DOT_CONFIG=y
BR2_arm=y
BR2_arm926t=y
BR2_ARM_TYPE="ARM926T"
BR2_ARM_EABI=y
BR2_ARCH="arm"
BR2_ENDIAN="LITTLE"
BR2_WGET="wget --passive-ftp"
BR2_SVN="svn co"
BR2_ZCAT="zcat"
BR2_TAR_OPTIONS=""
BR2_DL_DIR="$(BASE_DIR)/dl"
BR2_SOURCEFORGE_MIRROR="easynews"
BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
BR2_TOPDIR_PREFIX=""
BR2_TOPDIR_SUFFIX=""
BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
BR2_GNU_TARGET_SUFFIX="linux-uclibcgnueabi"
BR2_JLEVEL=1
BR2_KERNEL_HEADERS_2_6_12=y
BR2_DEFAULT_KERNEL_HEADERS="2.6.12"
BR2_ENABLE_LOCALE=y
BR2_PTHREADS_NATIVE=y
BR2_BINUTILS_VERSION_2_17=y
BR2_BINUTILS_VERSION="2.17"
BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
BR2_GCC_VERSION_4_1_1=y
BR2_GCC_VERSION="4.1.1"
BR2_EXTRA_GCC_CONFIG_OPTIONS=""
BR2_INSTALL_LIBSTDCPP=y
BR2_GCC_SHARED_LIBGCC=y
BR2_CCACHE=y
BR2_PACKAGE_GDB=y
BR2_GDB_VERSION_6_3=y
BR2_GDB_VERSION="6.3"
BR2_ELF2FLT=y
BR2_PACKAGE_SSTRIP_TARGET=y
BR2_PACKAGE_SSTRIP_HOST=y
BR2_ENABLE_MULTILIB=y
BR2_LARGEFILE=y
BR2_SOFT_FLOAT=y
BR2_TARGET_OPTIMIZATION="-Os -pipe"
BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y
BR2_PACKAGE_BUSYBOX=y
BR2_PACKAGE_BUSYBOX_SNAPSHOT=y
BR2_PACKAGE_BUSYBOX_INSTALL_SYMLINKS=y
BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox.config"
BR2_PACKAGE_BASH=y
BR2_PACKAGE_BZIP2=y
[snipped]
BR2_PACKAGE_WHICH=y
BR2_PACKAGE_ZLIB=y
BR2_TARGET_ROOTFS_SQUASHFS=y
----------------------------------------------------------------------
bernhardf - 11-22-06 15:16
----------------------------------------------------------------------
jimdigriz,
Can you please attach your buildroot.config and your uClibc.config
thanks
----------------------------------------------------------------------
bernhardf - 01-19-07 08:27
----------------------------------------------------------------------
Please retry with current trunk and gcc >= 4.1, preferably 4.2
I shall close this report as fixed unless i hear anything back within a
few days.
Thanks for the report.
----------------------------------------------------------------------
jimdigriz - 01-20-07 05:20
----------------------------------------------------------------------
Hi,
Sorry for not being able to get back to you. I am unable to repeat the
issue
and the original project that needed buildroot 'expired' :-/
Anyway, once again sorry for having wasted your time.
Regards
Alex
----------------------------------------------------------------------
bernhardf - 01-20-07 11:00
----------------------------------------------------------------------
Works for me (tm). Thanks for the report anyway :)
Issue History
Date Modified Username Field Change
======================================================================
07-02-06 14:27 raina New Issue
07-02-06 14:28 raina Status new => assigned
07-02-06 14:28 raina Assigned To => uClibc
07-02-06 14:28 raina File Added: .config
07-06-06 03:16 raina Issue Monitored: raina
08-28-06 03:50 bernhardf Note Added: 0001594
10-29-06 04:04 jimdigriz Note Added: 0001725
11-22-06 15:16 bernhardf Note Added: 0001784
01-19-07 08:27 bernhardf Note Added: 0002000
01-19-07 08:27 bernhardf Status assigned => feedback
01-20-07 05:20 jimdigriz Note Added: 0002011
01-20-07 11:00 bernhardf Status feedback => closed
01-20-07 11:00 bernhardf Note Added: 0002012
01-20-07 11:00 bernhardf Resolution open => unable to
reproduce
02-12-07 05:43 vapier Status closed => assigned
02-12-07 05:43 vapier Assigned To uClibc => buildroot
======================================================================
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-02-12 13:43 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-02-12 13:43 [Buildroot] [buildroot 0000932]: make didn't run through buildroot bugs at busybox.net
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.