Re: [PATCHv5 1/9] nl80211: New netlink command for TID specific configuration

[Tamizh chelvam <tamizhr@codeaurora.org>]

>> +enum ieee80211_tid_conf_mask {
>> +	IEEE80211_TID_CONF_NOACK	= BIT(0),
>> +};
>> +
>> +/**
>> + * struct ieee80211_tid_cfg - TID specific configuration
>> + * @tid: TID number
>> + * @tid_conf_mask: bitmap indicating which parameter changed
>> + *	see %enum ieee80211_tid_conf_mask
>> + * @noack: noack configuration value for the TID
>> + */
>> +struct ieee80211_tid_cfg {
>> +	u8 tid;
>> +	enum ieee80211_tid_conf_mask tid_conf_mask;
> 
> This shouldn't use the enum type if it's a bitmap. Doing the enum type
> above is only useful for documentation, which you should add there.
> 
Okay. I will change this to u32.

>> + * @set_tid_config: TID specific configuration. Apply this 
>> configuration for
>> + *	all the connected stations in the BSS if peer is NULL. Otherwise
> 
> %NULL renders better, IIRC
> 
Sure.

>> + * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a
>> + *	nested attribute with %NL80211_ATTR_TID_* sub-attributes.
> 
> Please use NL80211_TID_ATTR_* to disambiguate the namespaces
> 
Sure.
>> +enum nl80211_tid_config {
>> +	NL80211_TID_CONFIG_DEFAULT,
>> +	NL80211_TID_CONFIG_ENABLE,
>> +	NL80211_TID_CONFIG_DISABLE,
>> +};
> 
> 
> That could do with some documentation
> 
Sure.
>> +
>> +/* enum nl80211_attr_tid_config - TID specific configuration.
>> + * @NL80211_ATTR_TID_CONFIG_TID: a TID value (u8 attribute).
> 
> See above - TID_ATTR_* is better.
> 
>> + * @NL80211_ATTR_TID_CONFIG_NOACK: Configure ack policy for the TID.
>> + *	specified in %NL80211_ATTR_TID_CONFIG_TID. see %enum 
>> nl80211_tid_config.
>> + *	Its type is u8, if the peer MAC address is passed in 
>> %NL80211_ATTR_MAC,
>> + *	then the noack configuration is applied to the data frame for the 
>> tid
>> + *	to that connected station. This configuration is valid only for 
>> STA's
>> + *      current connection. i.e. the configuration will be reset to 
>> default when
>> + *      the station connects back after disconnection/roaming.
>> + *      when user-space does not include %NL80211_ATTR_MAC, then this
> 
> please use tabs consistently
> 
>> + *	configuration should be treated as per-netdev configuration.
>> + *	This configuration will be cleared when the interface goes down 
>> and on
>> + *	the disconnection from a BSS.
> 
> "goes down" is redundant then? Or do you mean that's for the AP case?
> 
In AP case, if a station disconnects from AP then the configuration will 
be cleared for the station. Similarly in STA mode if it disconnected 
from the BSS then the configuration also will be cleared.

>> +static const struct nla_policy
>> +nl80211_attr_tid_config_policy[NL80211_ATTR_TID_CONFIG_MAX + 1] = {
>> +	[NL80211_ATTR_TID_CONFIG_TID] = { .type = NLA_U8 },
> 
> Shouldn't this use NLA_POLICY_RANGE() or MAX()?
> 
To give option to apply configuration for all TIDs if the value is 
255(likely).
>> +	[NL80211_ATTR_TID_CONFIG_NOACK] =
>> +			NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
>> +};
>> +
>>  const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
>>  	[NL80211_ATTR_WIPHY] = { .type = NLA_U32 },
>>  	[NL80211_ATTR_WIPHY_NAME] = { .type = NLA_NUL_STRING,
>> @@ -541,6 +548,8 @@ static int validate_ie_attr(const struct nlattr 
>> *attr,
>>  	[NL80211_ATTR_PEER_MEASUREMENTS] =
>>  		NLA_POLICY_NESTED(nl80211_pmsr_attr_policy),
>>  	[NL80211_ATTR_AIRTIME_WEIGHT] = NLA_POLICY_MIN(NLA_U16, 1),
>> +	[NL80211_ATTR_TID_CONFIG] =
>> +			NLA_POLICY_NESTED(nl80211_attr_tid_config_policy),
>>  };
> 
> Great! :-)
> 
>>  /* policy for the key attributes */
>> @@ -13259,6 +13268,93 @@ static int 
>> nl80211_get_ftm_responder_stats(struct sk_buff *skb,
>>  	return -ENOBUFS;
>>  }
>> 
>> +static int parse_tid_conf(struct cfg80211_registered_device *rdev,
>> +			  struct nlattr *attrs[],
>> +			  struct ieee80211_tid_cfg *tid_conf,
>> +			  const u8 *peer)
>> +{
>> +	tid_conf->tid = nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_TID]);
> 
> You need to check that this is even present!
> 
>> +	size_of_conf = sizeof(struct ieee80211_tid_config) +
>> +		num_conf * sizeof(struct ieee80211_tid_cfg);
> 
> use struct_size()
Sure
> 
>> +	tid_conf = kzalloc(size_of_conf, GFP_KERNEL);
>> +	if (!tid_conf)
>> +		return -ENOMEM;
>> +
>> +	tid_conf->n_tid_conf = num_conf;
>> +
>> +	if (info->attrs[NL80211_ATTR_MAC])
>> +		tid_conf->peer = nla_data(info->attrs[NL80211_ATTR_MAC]);
>> +	else
>> +		tid_conf->peer = NULL;
> 
> No need to initialize to NULL after kzalloc()
okay sure.
> 
>> +	nla_for_each_nested(tid, info->attrs[NL80211_ATTR_TID_CONFIG],
>> +			    rem_conf) {
>> +		ret = nla_parse_nested(attrs, NL80211_ATTR_TID_CONFIG_MAX, tid,
>> +				       NULL, NULL);
>> +
>> +		if (ret)
>> +			goto bad_tid_conf;
>> +
>> +		if (!attrs[NL80211_ATTR_TID_CONFIG_TID]) {
>> +			ret = -EINVAL;
>> +			goto bad_tid_conf;
>> +		}
> 
> Oh, you check here. Perhaps easier to do inside though?
Checked here since the parse_tid_conf function called after this check.
> 
>> +	{
>> +		.cmd = NL80211_CMD_SET_TID_CONFIG,
>> +		.doit = nl80211_set_tid_config,
>> +		.policy = nl80211_policy,
> 
> The .policy field no longer exists.
Sure, I will remove this
> 
> johannes

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k