* [LARTC] Re: route mail through different gateway
@ 2006-08-10 13:14 Jarek Poplawski
0 siblings, 0 replies; only message in thread
From: Jarek Poplawski @ 2006-08-10 13:14 UTC (permalink / raw)
To: lartc
On 04-08-2006 04:36, Michael wrote:
> Hi All,
>
> I've got server with one LAN card eth0 ip\x10.0.0.5 <http://10.0.0.5>
>
> default access t ointernety done through ADSL router gw 10.0.0.1
> <http://10.0.0.1>
> we got second internet access through another ADSL router gw 10.0.0.2
> <http://10.0.0.2>
>
> I want to send all e-mail out through gw 10.0.0.2 <http://10.0.0.2>
> How it can be done?
> I've tried to mark packets:
> iptables -t mangle -A OUTPUT -p tcp --dport 25 -j MARK --set-mark 0x1
> and
> ip ru add fwmark 0x1 table mail.out
> ip ro add default via 10.0.0.2 <http://10.0.0.2> lookup mail.out
You mean:
ip ro add default via 10.0.0.2 table mail.out
Try this also:
echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter
Jarek P.
PS: I hope you have this mail.out properly added (or replace this
with a number e.g.: 100) and fwmark enabled in kernel config.
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-08-10 13:14 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-08-10 13:14 [LARTC] Re: route mail through different gateway Jarek Poplawski
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.