All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Amelie Delaunay <amelie.delaunay@foss.st.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>
Cc: devicetree@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/5] ARM: dts: stm32: fullfill diversity with OPP for STM32M15x SOCs
Date: Tue, 27 May 2025 15:12:54 +0200	[thread overview]
Message-ID: <eec2a1db-717e-46f2-a988-6beefab7b699@kernel.org> (raw)
In-Reply-To: <20250527-stm32mp157f-dk2-v1-1-8aef885a4928@foss.st.com>

On 27/05/2025 15:03, Amelie Delaunay wrote:
> From: Alexandre Torgue <alexandre.torgue@foss.st.com>
> 
> This commit creates new files to manage security features and supported OPP
> on STM32MP15x SOCs. On STM32MP15xY, "Y" gives information:
>  -Y = A means no cryp IP and no secure boot + A7-CPU@650MHz.
>  -Y = C means cryp IP + optee + secure boot + A7-CPU@650MHz.
>  -Y = D means no cryp IP and no secure boot + A7-CPU@800MHz.
>  -Y = F means cryp IP + optee + secure boot + A7-CPU@800MHz.
> 
> It fullfills the initial STM32MP15x SoC diversity introduced by
> commit 0eda69b6c5f9 ("ARM: dts: stm32: Manage security diversity
> for STM32M15x SOCs").
> 
> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
> ---
>  arch/arm/boot/dts/st/stm32mp15xa.dtsi |  5 +++++
>  arch/arm/boot/dts/st/stm32mp15xc.dtsi |  4 +++-
>  arch/arm/boot/dts/st/stm32mp15xd.dtsi |  5 +++++
>  arch/arm/boot/dts/st/stm32mp15xf.dtsi | 20 ++++++++++++++++++++
>  4 files changed, 33 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/st/stm32mp15xa.dtsi b/arch/arm/boot/dts/st/stm32mp15xa.dtsi
> new file mode 100644
> index 0000000000000000000000000000000000000000..cb55f5966f74011d12d7a5c6ad047569d25d4e98
> --- /dev/null
> +++ b/arch/arm/boot/dts/st/stm32mp15xa.dtsi
> @@ -0,0 +1,5 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
> +/*
> + * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
> + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.

You create entirely empty, unused file. There is literally no benefit of
this file, no impact, just more files to handle.

> + */
> diff --git a/arch/arm/boot/dts/st/stm32mp15xc.dtsi b/arch/arm/boot/dts/st/stm32mp15xc.dtsi
> index 97465717f932fc223647af76e88a6182cf3c870f..4d30a2a537f15c1e145635b090de0f0222526579 100644
> --- a/arch/arm/boot/dts/st/stm32mp15xc.dtsi
> +++ b/arch/arm/boot/dts/st/stm32mp15xc.dtsi
> @@ -1,9 +1,11 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)

License change is not explained in commit msg and anyway should be
separate commit with acks/sobs from all copyright holders. You also need
to CC them (Cc e.g. Gatien).

>  /*
>   * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
>   * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
>   */
>  
> +#include "stm32mp15xa.dtsi"
> +
>  &etzpc {
>  	cryp1: cryp@54001000 {
>  		compatible = "st,stm32mp1-cryp";
> diff --git a/arch/arm/boot/dts/st/stm32mp15xd.dtsi b/arch/arm/boot/dts/st/stm32mp15xd.dtsi
> new file mode 100644
> index 0000000000000000000000000000000000000000..cb55f5966f74011d12d7a5c6ad047569d25d4e98
> --- /dev/null
> +++ b/arch/arm/boot/dts/st/stm32mp15xd.dtsi
> @@ -0,0 +1,5 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
> +/*
> + * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
> + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
> + */

Same problems.

> diff --git a/arch/arm/boot/dts/st/stm32mp15xf.dtsi b/arch/arm/boot/dts/st/stm32mp15xf.dtsi
> new file mode 100644
> index 0000000000000000000000000000000000000000..5f6a2952125d00d468e2e4012024f02380cfaa49
> --- /dev/null
> +++ b/arch/arm/boot/dts/st/stm32mp15xf.dtsi
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
> +/*
> + * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
> + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
> + */
> +
> +#include "stm32mp15xd.dtsi"
> +
> +/ {
> +	soc {
> +		cryp1: cryp@54001000 {
> +			compatible = "st,stm32mp1-cryp";
> +			reg = <0x54001000 0x400>;
> +			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&rcc CRYP1>;
> +			resets = <&rcc CRYP1_R>;
> +			status = "disabled";
> +		};
> +	};
> +};
> 


Best regards,
Krzysztof


  reply	other threads:[~2025-05-27 13:29 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-27 13:03 [PATCH 0/5] Introduce STM32MP157F-DK2 board Amelie Delaunay
2025-05-27 13:03 ` [PATCH 1/5] ARM: dts: stm32: fullfill diversity with OPP for STM32M15x SOCs Amelie Delaunay
2025-05-27 13:12   ` Krzysztof Kozlowski [this message]
2025-05-27 14:03     ` Amelie Delaunay
2025-05-27 14:08       ` Krzysztof Kozlowski
2025-05-27 13:03 ` [PATCH 2/5] ARM: dts: stm32: use 'typec' generic name for stusb1600 on stm32mp15xx-dkx Amelie Delaunay
2025-05-27 13:03 ` [PATCH 3/5] dt-bindings: regulator: Add STM32MP15 SCMI regulator identifiers Amelie Delaunay
2025-05-27 13:03 ` [PATCH 4/5] dt-bindings: arm: stm32: add STM32MP157F-DK2 board compatible Amelie Delaunay
2025-05-27 13:09   ` Krzysztof Kozlowski
2025-05-27 13:17     ` Amelie Delaunay
2025-05-27 13:03 ` [PATCH 5/5] ARM: dts: stm32: add stm32mp157f-dk2 board support Amelie Delaunay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=eec2a1db-717e-46f2-a988-6beefab7b699@kernel.org \
    --to=krzk@kernel.org \
    --cc=alexandre.torgue@foss.st.com \
    --cc=amelie.delaunay@foss.st.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.