All of lore.kernel.org
 help / color / mirror / Atom feed
From: Federico Quagliata <federico@quagliata.org>
To: alsa-devel@lists.sourceforge.net
Subject: HP dv6000t
Date: Mon, 20 Nov 2006 21:09:15 +0100	[thread overview]
Message-ID: <ejt21b$qit$1@sea.gmane.org> (raw)
In-Reply-To: 1164046446.5390.234.camel@razman

Hi Tobin... I wrote you a private mail, but I'm not sure you got it as I had
problem with my mail server.

Here it is:

> I have a HP dv6000t laptop with 1 mic-in, 1-hp-out and 1-hp-spdif-out.
> 
> I use the latest alsa-drivers from the hg repository.
> 
> What works
>  - With model=hp-laptop sound from speakers is correctly muted when I 
> plug the hp jack in both hp and spdif out. Headphones do work.
> 
> What doesn't
>  - The laptop has a "mute" orange led on the mute button that stays 
> always on, even when mute is off;
>  - mute on master only actually mute the line-out, not the
>    integrated speakers;
>  - recording: neither from line-in nor the internal mic.
> 
> 
> System informations
> 
> dmesg
> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 20
> PCI: Setting latency timer of device 0000:00:1b.0 to 64
> 
> 
> lspci -s 0:1b -vn
> 00:1b.0 0403: 8086:27d8 (rev 02)
>         Subsystem: 103c:30bb
>         Flags: bus master, fast devsel, latency 0, IRQ 20
>         Memory at de300000 (64-bit, non-prefetchable) [size=16K]
>         Capabilities: [50] Power Management version 2
>         Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ 
> Queue=0/0 Enable-
>         Capabilities: [70] Express Unknown type IRQ 0
>         Capabilities: [100] Virtual Channel
>         Capabilities: [130] Unknown (5)
> 
> 
> cat /proc/asound/card0/codec#0
> Codec: Conexant CXT5045
> Address: 0
> Vendor Id: 0x14f15045
> Subsystem Id: 0x103c30bb
> Revision Id: 0x100100
> Default PCM:
>     rates [0x140]: 48000 96000
>     bits [0xe]: 16 20 24
>     formats [0x1]: PCM
> Default Amp-In caps: N/A
> Default Amp-Out caps: N/A
> Node 0x10 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
>   Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
>   Amp-Out vals:  [0x9c 0x9c]
>   Pincap 0x0810014: OUT EAPD Detect
>   Pin Default 0x90170110: [Fixed] Speaker at Int N/A
>     Conn = Analog, Color = Unknown
>   Pin-ctls: 0x40: OUT
>   Power: 0x0
>   Connection: 2
>      0x19* 0x17
> Node 0x11 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
>   Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
>   Amp-Out vals:  [0x1c 0x1c]
>   Pincap 0x08113c: IN OUT HP Detect
>   Pin Default 0x0121401f: [Jack] HP Out at Ext Rear
>     Conn = 1/8, Color = Green
>   Pin-ctls: 0x40: OUT
>   Power: 0x0
>   Connection: 2
>      0x19* 0x17
> Node 0x12 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
>   Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
>   Amp-Out vals:  [0xab 0xab]
>   Pincap 0x08113c: IN OUT HP Detect
>   Pin Default 0x01813030: [Jack] Line In at Ext Rear
>     Conn = 1/8, Color = Blue
>   Pin-ctls: 0x20: IN
>   Power: 0x0
>   Connection: 2
>      0x19* 0x17
> Node 0x13 [Pin Complex] wcaps 0x400301: Stereo Digital
>   Pincap 0x0810: OUT
>   Pin Default 0x21447040: [Jack] SPDIF Out at Sep Rear
>     Conn = RCA, Color = Yellow
>   Pin-ctls: 0x00:
>   Connection: 1
>      0x18
> Node 0x14 [Pin Complex] wcaps 0x400081: Stereo
>   Pincap 0x081124: IN Detect
>   Pin Default 0x97a70050: [Fixed] Mic at Int Riser
>     Conn = Analog, Color = Unknown
>   Pin-ctls: 0x20: IN
> Node 0x15 [Pin Complex] wcaps 0x400001: Stereo
>   Pincap 0x0820: IN
>   Pin Default 0x99330060: [Fixed] CD at Int ATAPI
>     Conn = ATAPI, Color = Unknown
>   Pin-ctls: 0x00:
> Node 0x16 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
>   Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0b, mute=1
>   Amp-Out vals:  [0x06]
> Node 0x17 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
>   Amp-In caps: ofs=0x14, nsteps=0x2b, stepsize=0x05, mute=1
>   Amp-In vals:  [0x17 0x17] [0x94 0x94] [0x94 0x94] [0x94 0x94] [0x94 
> 0x94]
>   Power: 0x0
>   Connection: 5
>      0x19 0x14 0x12 0x11 0x15
> Node 0x18 [Audio Output] wcaps 0x211: Stereo Digital
>   PCM:
>     rates [0x40]: 48000
>     bits [0x6]: 16 20
>     formats [0x5]: PCM AC3
> Node 0x19 [Audio Output] wcaps 0xc11: Stereo
>   PCM:
>     rates [0x540]: 48000 96000 192000
>     bits [0xe]: 16 20 24
>     formats [0x1]: PCM
>   Power: 0x0
> Node 0x1a [Audio Input] wcaps 0x100d0b: Stereo Amp-In
>   Amp-In caps: ofs=0x00, nsteps=0x17, stepsize=0x05, mute=1
>   Amp-In vals:  [0x80 0x80] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 
> 0x00]
>   Power: 0x0
>   Connection: 5
>      0x17 0x14* 0x12 0x11 0x15
> Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono

Greetings,
Federico
-- 
On the web:  http://www.quaqo.org - OpenPGP KeyID: 0x1D535856
Jabber: quaqo@jabber.org - MSN: quaqo@msn.com - ICQ: 48618109
Linux User: #263663 / Machine: #341187 (Arch Linux / Gimmick)


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

      reply	other threads:[~2006-11-20 20:09 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-11-20 18:08 alsa conexant HP dv2035LA Antonio Sampayo
2006-11-20 18:14 ` Tobin Davis
2006-11-20 20:09   ` Federico Quagliata [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='ejt21b$qit$1@sea.gmane.org' \
    --to=federico@quagliata.org \
    --cc=alsa-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.