From: Neil Armstrong <narmstrong@baylibre.com>
To: Jerome Brunet <jbrunet@baylibre.com>,
Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Kevin Hilman <khilman@baylibre.com>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/5] ASoC: meson: add hdmitx glue support
Date: Wed, 15 May 2019 15:32:55 +0200 [thread overview]
Message-ID: <f7bafd16-1332-e124-79fb-7f045975aed9@baylibre.com> (raw)
In-Reply-To: <20190515131858.32130-1-jbrunet@baylibre.com>
On 15/05/2019 15:18, Jerome Brunet wrote:
> On the Amlogic SoC, there is a glue between the SoC audio outputs and the
> input of the embedded Synopsys HDMI controller.
>
> On the g12a, this glue is mostly a couple of muxes to select the i2s and
> spdif inputs of the hdmi controller. Each of these inputs may have
> different hw_params and fmt which makes our life a little bit more
> interesting, especially when switching between to active inputs.
>
> This glue is modeled as codec driver and uses codec-to-codec links to
> connect to the Synopsys controller. This allows to use the regular
> hdmi-codec driver (used by dw-hdmi i2s).
>
> To avoid glitches while switching input, the trick is to temporarily
> force a disconnection of the mux output, which shutdowns the output dai
> link. This also ensure that the stream parameters and fmt are updated
> when the output is connected back.
>
> Jerome Brunet (5):
> ASoC: meson: axg-card: set link name based on link node name
> ASoC: dapm: allow muxes to force a disconnect
> ASoC: meson: add tohdmitx DT bindings
> ASoC: meson: axg-card: add basic codec-to-codec link support
> ASoC: meson: add g12a tohdmitx control
>
> .../bindings/sound/amlogic,g12a-tohdmitx.txt | 55 +++
> .../dt-bindings/sound/meson-g12a-tohdmitx.h | 13 +
> sound/soc/meson/Kconfig | 8 +
> sound/soc/meson/Makefile | 2 +
> sound/soc/meson/axg-card.c | 31 +-
> sound/soc/meson/g12a-tohdmitx.c | 413 ++++++++++++++++++
> sound/soc/soc-dapm.c | 2 +-
> 7 files changed, 518 insertions(+), 6 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt
> create mode 100644 include/dt-bindings/sound/meson-g12a-tohdmitx.h
> create mode 100644 sound/soc/meson/g12a-tohdmitx.c
>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: Jerome Brunet <jbrunet@baylibre.com>,
Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Kevin Hilman <khilman@baylibre.com>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org
Subject: Re: [PATCH 0/5] ASoC: meson: add hdmitx glue support
Date: Wed, 15 May 2019 15:32:55 +0200 [thread overview]
Message-ID: <f7bafd16-1332-e124-79fb-7f045975aed9@baylibre.com> (raw)
In-Reply-To: <20190515131858.32130-1-jbrunet@baylibre.com>
On 15/05/2019 15:18, Jerome Brunet wrote:
> On the Amlogic SoC, there is a glue between the SoC audio outputs and the
> input of the embedded Synopsys HDMI controller.
>
> On the g12a, this glue is mostly a couple of muxes to select the i2s and
> spdif inputs of the hdmi controller. Each of these inputs may have
> different hw_params and fmt which makes our life a little bit more
> interesting, especially when switching between to active inputs.
>
> This glue is modeled as codec driver and uses codec-to-codec links to
> connect to the Synopsys controller. This allows to use the regular
> hdmi-codec driver (used by dw-hdmi i2s).
>
> To avoid glitches while switching input, the trick is to temporarily
> force a disconnection of the mux output, which shutdowns the output dai
> link. This also ensure that the stream parameters and fmt are updated
> when the output is connected back.
>
> Jerome Brunet (5):
> ASoC: meson: axg-card: set link name based on link node name
> ASoC: dapm: allow muxes to force a disconnect
> ASoC: meson: add tohdmitx DT bindings
> ASoC: meson: axg-card: add basic codec-to-codec link support
> ASoC: meson: add g12a tohdmitx control
>
> .../bindings/sound/amlogic,g12a-tohdmitx.txt | 55 +++
> .../dt-bindings/sound/meson-g12a-tohdmitx.h | 13 +
> sound/soc/meson/Kconfig | 8 +
> sound/soc/meson/Makefile | 2 +
> sound/soc/meson/axg-card.c | 31 +-
> sound/soc/meson/g12a-tohdmitx.c | 413 ++++++++++++++++++
> sound/soc/soc-dapm.c | 2 +-
> 7 files changed, 518 insertions(+), 6 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt
> create mode 100644 include/dt-bindings/sound/meson-g12a-tohdmitx.h
> create mode 100644 sound/soc/meson/g12a-tohdmitx.c
>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-05-15 13:32 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-15 13:18 [PATCH 0/5] ASoC: meson: add hdmitx glue support Jerome Brunet
2019-05-15 13:18 ` Jerome Brunet
2019-05-15 13:18 ` [PATCH 1/5] ASoC: meson: axg-card: set link name based on link node name Jerome Brunet
2019-05-15 13:18 ` Jerome Brunet
2019-05-16 11:13 ` Applied "ASoC: meson: axg-card: set link name based on link node name" to the asoc tree Mark Brown
2019-05-16 11:13 ` Mark Brown
2019-05-16 11:13 ` Mark Brown
2019-05-15 13:18 ` [PATCH 2/5] ASoC: dapm: allow muxes to force a disconnect Jerome Brunet
2019-05-15 13:18 ` Jerome Brunet
2019-05-16 11:13 ` Applied "ASoC: dapm: allow muxes to force a disconnect" to the asoc tree Mark Brown
2019-05-16 11:13 ` Mark Brown
2019-05-16 11:13 ` Mark Brown
2019-05-15 13:18 ` [PATCH 3/5] ASoC: meson: add tohdmitx DT bindings Jerome Brunet
2019-05-15 13:18 ` Jerome Brunet
2019-05-16 11:13 ` Applied "ASoC: meson: add tohdmitx DT bindings" to the asoc tree Mark Brown
2019-05-16 11:13 ` Mark Brown
2019-05-16 11:13 ` Mark Brown
2019-05-15 13:18 ` [PATCH 4/5] ASoC: meson: axg-card: add basic codec-to-codec link support Jerome Brunet
2019-05-15 13:18 ` Jerome Brunet
2019-05-16 11:13 ` Applied "ASoC: meson: axg-card: add basic codec-to-codec link support" to the asoc tree Mark Brown
2019-05-16 11:13 ` Mark Brown
2019-05-16 11:13 ` Mark Brown
2019-05-15 13:18 ` [PATCH 5/5] ASoC: meson: add g12a tohdmitx control Jerome Brunet
2019-05-15 13:18 ` Jerome Brunet
2019-05-16 11:13 ` Applied "ASoC: meson: add g12a tohdmitx control" to the asoc tree Mark Brown
2019-05-16 11:13 ` Mark Brown
2019-05-16 11:13 ` Mark Brown
2019-05-15 13:32 ` Neil Armstrong [this message]
2019-05-15 13:32 ` [PATCH 0/5] ASoC: meson: add hdmitx glue support Neil Armstrong
2019-05-15 18:33 ` Kevin Hilman
2019-05-15 18:33 ` Kevin Hilman
2019-05-15 18:33 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f7bafd16-1332-e124-79fb-7f045975aed9@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=lgirdwood@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.