* [ALSA - driver 0000795]: Broken Pipe
@ 2005-01-08 22:21 bugtrack
0 siblings, 0 replies; 5+ messages in thread
From: bugtrack @ 2005-01-08 22:21 UTC (permalink / raw)
To: alsa-devel
The following issue has been SUBMITTED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=795>
======================================================================
Reported By: ajir
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 795
Category: PCI - intel8x0
Reproducibility: always
Severity: crash
Priority: normal
Status: new
Distribution:
Kernel Version:
======================================================================
Date Submitted: 01-08-2005 23:21 CET
Last Modified: 01-08-2005 23:21 CET
======================================================================
Summary: Broken Pipe
Description:
Hi!
I got a problem, with softvolume plugin and 1.0.8rc2 drivers( without
softvol plugin too).
When I changed ALSA from 1.0.5 to 1.0.8rc2 after system boot all modules
load perfectly but! any program like amp(in text mode) or xmms(X mode)
report broken pipe (no dsp device). When I enable softvol it remains the
same. But if softvol is on and manualy set to off(deleting of .asoundrc
without rebooting) Sustem is OK, I got all programs playing and I CAN
FINALY set volume!!! (but starting and stoping .asoundrd by hand is
annoying!). Without softvol set by asoundrc only aplay can give a sound
from wave file
======================================================================
Issue History
Date Modified Username Field Change
======================================================================
01-08-05 23:21 ajir New Issue
======================================================================
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
^ permalink raw reply [flat|nested] 5+ messages in thread
* [ALSA - driver 0000795]: Broken Pipe
@ 2005-01-08 22:22 bugtrack
0 siblings, 0 replies; 5+ messages in thread
From: bugtrack @ 2005-01-08 22:22 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=795>
======================================================================
Reported By: ajir
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 795
Category: PCI - intel8x0
Reproducibility: always
Severity: crash
Priority: normal
Status: new
Distribution:
Kernel Version:
======================================================================
Date Submitted: 01-08-2005 23:21 CET
Last Modified: 01-08-2005 23:22 CET
======================================================================
Summary: Broken Pipe
Description:
Hi!
I got a problem, with softvolume plugin and 1.0.8rc2 drivers( without
softvol plugin too).
When I changed ALSA from 1.0.5 to 1.0.8rc2 after system boot all modules
load perfectly but! any program like amp(in text mode) or xmms(X mode)
report broken pipe (no dsp device). When I enable softvol it remains the
same. But if softvol is on and manualy set to off(deleting of .asoundrc
without rebooting) Sustem is OK, I got all programs playing and I CAN
FINALY set volume!!! (but starting and stoping .asoundrd by hand is
annoying!). Without softvol set by asoundrc only aplay can give a sound
from wave file
======================================================================
----------------------------------------------------------------------
ajir - 01-08-05 23:22
----------------------------------------------------------------------
I use 1.08.rc2 drivers, OSS, lib, utils codec is CMI9739A
Issue History
Date Modified Username Field Change
======================================================================
01-08-05 23:21 ajir New Issue
01-08-05 23:22 ajir Note Added: 0003130
======================================================================
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
^ permalink raw reply [flat|nested] 5+ messages in thread
* [ALSA - driver 0000795]: Broken Pipe
@ 2005-01-11 15:46 bugtrack
0 siblings, 0 replies; 5+ messages in thread
From: bugtrack @ 2005-01-11 15:46 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=795>
======================================================================
Reported By: ajir
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 795
Category: PCI - intel8x0
Reproducibility: always
Severity: crash
Priority: normal
Status: new
Distribution:
Kernel Version:
======================================================================
Date Submitted: 01-08-2005 23:21 CET
Last Modified: 01-11-2005 16:46 CET
======================================================================
Summary: Broken Pipe
Description:
Hi!
I got a problem, with softvolume plugin and 1.0.8rc2 drivers( without
softvol plugin too).
When I changed ALSA from 1.0.5 to 1.0.8rc2 after system boot all modules
load perfectly but! any program like amp(in text mode) or xmms(X mode)
report broken pipe (no dsp device). When I enable softvol it remains the
same. But if softvol is on and manualy set to off(deleting of .asoundrc
without rebooting) Sustem is OK, I got all programs playing and I CAN
FINALY set volume!!! (but starting and stoping .asoundrd by hand is
annoying!). Without softvol set by asoundrc only aplay can give a sound
from wave file
======================================================================
----------------------------------------------------------------------
ajir - 01-08-05 23:22
----------------------------------------------------------------------
I use 1.08.rc2 drivers, OSS, lib, utils codec is CMI9739A
----------------------------------------------------------------------
tiwai - 01-11-05 16:46
----------------------------------------------------------------------
Don't use any of entries ~/.asoundrc but just pass "default" as the PCM to
use.
Issue History
Date Modified Username Field Change
======================================================================
01-08-05 23:21 ajir New Issue
01-08-05 23:22 ajir Note Added: 0003130
01-11-05 16:46 tiwai Note Added: 0003155
======================================================================
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
^ permalink raw reply [flat|nested] 5+ messages in thread
* [ALSA - driver 0000795]: Broken Pipe
@ 2005-09-14 14:20 bugtrack
0 siblings, 0 replies; 5+ messages in thread
From: bugtrack @ 2005-09-14 14:20 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=795>
======================================================================
Reported By: ajir
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 795
Category: PCI - intel8x0
Reproducibility: always
Severity: crash
Priority: normal
Status: new
Distribution:
Kernel Version:
======================================================================
Date Submitted: 01-08-2005 23:21 CET
Last Modified: 09-14-2005 16:20 CEST
======================================================================
Summary: Broken Pipe
Description:
Hi!
I got a problem, with softvolume plugin and 1.0.8rc2 drivers( without
softvol plugin too).
When I changed ALSA from 1.0.5 to 1.0.8rc2 after system boot all modules
load perfectly but! any program like amp(in text mode) or xmms(X mode)
report broken pipe (no dsp device). When I enable softvol it remains the
same. But if softvol is on and manualy set to off(deleting of .asoundrc
without rebooting) Sustem is OK, I got all programs playing and I CAN
FINALY set volume!!! (but starting and stoping .asoundrd by hand is
annoying!). Without softvol set by asoundrc only aplay can give a sound
from wave file
======================================================================
----------------------------------------------------------------------
tiwai - 01-11-05 16:46
----------------------------------------------------------------------
Don't use any of entries ~/.asoundrc but just pass "default" as the PCM to
use.
----------------------------------------------------------------------
jdthood - 09-14-05 16:20
----------------------------------------------------------------------
Submitter: Did you manage to solve this problem?
Issue History
Date Modified Username Field Change
======================================================================
01-08-05 23:21 ajir New Issue
01-08-05 23:22 ajir Note Added: 0003130
01-11-05 16:46 tiwai Note Added: 0003155
09-14-05 16:20 jdthood Note Added: 0006181
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server.
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
^ permalink raw reply [flat|nested] 5+ messages in thread
* [ALSA - driver 0000795]: Broken Pipe
@ 2006-03-22 2:16 bugtrack
0 siblings, 0 replies; 5+ messages in thread
From: bugtrack @ 2006-03-22 2:16 UTC (permalink / raw)
To: alsa-devel
The following issue has been CLOSED
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=795>
======================================================================
Reported By: ajir
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 795
Category: PCI - intel8x0
Reproducibility: always
Severity: crash
Priority: normal
Status: closed
Distribution:
Kernel Version:
Resolution: open
Fixed in Version:
======================================================================
Date Submitted: 01-08-2005 23:21 CET
Last Modified: 03-22-2006 03:16 CET
======================================================================
Summary: Broken Pipe
Description:
Hi!
I got a problem, with softvolume plugin and 1.0.8rc2 drivers( without
softvol plugin too).
When I changed ALSA from 1.0.5 to 1.0.8rc2 after system boot all modules
load perfectly but! any program like amp(in text mode) or xmms(X mode)
report broken pipe (no dsp device). When I enable softvol it remains the
same. But if softvol is on and manualy set to off(deleting of .asoundrc
without rebooting) Sustem is OK, I got all programs playing and I CAN
FINALY set volume!!! (but starting and stoping .asoundrd by hand is
annoying!). Without softvol set by asoundrc only aplay can give a sound
from wave file
======================================================================
----------------------------------------------------------------------
jdthood - 09-14-05 16:20
----------------------------------------------------------------------
Submitter: Did you manage to solve this problem?
----------------------------------------------------------------------
rlrevell - 03-22-06 03:16
----------------------------------------------------------------------
No response
Issue History
Date Modified Username Field Change
======================================================================
01-08-05 23:21 ajir New Issue
01-08-05 23:22 ajir Note Added: 0003130
01-11-05 16:46 tiwai Note Added: 0003155
09-14-05 16:20 jdthood Note Added: 0006181
03-22-06 03:16 rlrevell Status new => closed
03-22-06 03:16 rlrevell Note Added: 0008806
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2006-03-22 2:16 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-01-08 22:21 [ALSA - driver 0000795]: Broken Pipe bugtrack
-- strict thread matches above, loose matches on Subject: below --
2005-01-08 22:22 bugtrack
2005-01-11 15:46 bugtrack
2005-09-14 14:20 bugtrack
2006-03-22 2:16 bugtrack
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.