From: Walker Chen <walker.chen@starfivetech.com>
To: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>,
Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor.dooley@microchip.com>,
Palmer Dabbelt <palmer@dabbelt.com>, <dmaengine@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-riscv@lists.infradead.org>
Subject: Re: [PATCH v3 2/3] dmaengine: dw-axi-dmac: Add support for StarFive JH7110 DMA
Date: Fri, 3 Mar 2023 16:18:04 +0800 [thread overview]
Message-ID: <ffe8f7d0-8f47-859f-e7f8-8343b3ae6330@starfivetech.com> (raw)
In-Reply-To: <CAJM55Z946EVyN50KcBmh7chOOnzwTOjwLR+Z_fCOrfin9j7LNA@mail.gmail.com>
On 2023/2/27 21:47, Emil Renner Berthing wrote:
> On Mon, 27 Feb 2023 at 14:11, Walker Chen <walker.chen@starfivetech.com> wrote:
>>
>> Add DMA reset operation in device probe and use different configuration
>> on CH_CFG registers according to match data.
>>
>> Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
>> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
>
> Hi Walker,
>
> Firstly your Signed-off-by should be the last line.
>
> I may have been unclear in my last review, sorry. I meant to give my
> reviewed-by if you just removed the reset pointer that was never used.
> This new version also adds a lot of new code.
>
> Though, I'm glad you want to update the driver to use match data
> rather than of_device_is_compatible, but then please update all uses
> of of_device_is_compatible. With this patch starfive uses match data
> and the intel,kmb-axi-dma still uses of_device_is_compatible.
Hey Emil, thank you for pointing out these problems for me.
Will be fixed.
> More comments below..
>
>> ---
>> .../dma/dw-axi-dmac/dw-axi-dmac-platform.c | 34 +++++++++++++++++--
>> drivers/dma/dw-axi-dmac/dw-axi-dmac.h | 7 ++++
>> 2 files changed, 39 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
>> index bf85aa0979ec..400eeef707bf 100644
>> --- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
>> +++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
>> @@ -21,10 +21,12 @@
>> #include <linux/kernel.h>
>> #include <linux/module.h>
>> #include <linux/of.h>
>> +#include <linux/of_device.h>
>> #include <linux/of_dma.h>
>> #include <linux/platform_device.h>
>> #include <linux/pm_runtime.h>
>> #include <linux/property.h>
>> +#include <linux/reset.h>
>> #include <linux/slab.h>
>> #include <linux/types.h>
>>
>> @@ -86,7 +88,8 @@ static inline void axi_chan_config_write(struct axi_dma_chan *chan,
>>
>> cfg_lo = (config->dst_multblk_type << CH_CFG_L_DST_MULTBLK_TYPE_POS |
>> config->src_multblk_type << CH_CFG_L_SRC_MULTBLK_TYPE_POS);
>> - if (chan->chip->dw->hdata->reg_map_8_channels) {
>> + if (chan->chip->dw->hdata->reg_map_8_channels &&
>> + !chan->chip->dw->hdata->use_cfg2) {
>> cfg_hi = config->tt_fc << CH_CFG_H_TT_FC_POS |
>> config->hs_sel_src << CH_CFG_H_HS_SEL_SRC_POS |
>> config->hs_sel_dst << CH_CFG_H_HS_SEL_DST_POS |
>> @@ -1142,7 +1145,7 @@ static int dma_chan_terminate_all(struct dma_chan *dchan)
>> axi_chan_disable(chan);
>>
>> ret = readl_poll_timeout_atomic(chan->chip->regs + DMAC_CHEN, val,
>> - !(val & chan_active), 1000, 10000);
>> + !(val & chan_active), 1000, DMAC_TIMEOUT_US);
>> if (ret == -ETIMEDOUT)
>> dev_warn(dchan2dev(dchan),
>> "%s failed to stop\n", axi_chan_name(chan));
>> @@ -1367,6 +1370,17 @@ static int parse_device_properties(struct axi_dma_chip *chip)
>> return 0;
>> }
>>
>> +static int jh7110_rst_init(struct platform_device *pdev)
>> +{
>> + struct reset_control *resets;
>> +
>> + resets = devm_reset_control_array_get_exclusive(&pdev->dev);
>> + if (IS_ERR(resets))
>> + return PTR_ERR(resets);
>> +
>> + return reset_control_deassert(resets);
>> +}
>> +
>> static int dw_probe(struct platform_device *pdev)
>> {
>> struct device_node *node = pdev->dev.of_node;
>> @@ -1374,6 +1388,7 @@ static int dw_probe(struct platform_device *pdev)
>> struct resource *mem;
>> struct dw_axi_dma *dw;
>> struct dw_axi_dma_hcfg *hdata;
>> + const struct axi_dma_chip_config *ccfg;
>> u32 i;
>> int ret;
>>
>> @@ -1416,6 +1431,15 @@ static int dw_probe(struct platform_device *pdev)
>> if (IS_ERR(chip->cfgr_clk))
>> return PTR_ERR(chip->cfgr_clk);
>>
>> + ccfg = of_device_get_match_data(&pdev->dev);
>> + if (ccfg) {
>> + ret = ccfg->rst_init(pdev);
>> + if (ret)
>> + return ret;
>> +
>> + chip->dw->hdata->use_cfg2 = ccfg->use_cfg2;
>> + }
>> +
>> ret = parse_device_properties(chip);
>> if (ret)
>> return ret;
>> @@ -1557,9 +1581,15 @@ static const struct dev_pm_ops dw_axi_dma_pm_ops = {
>> SET_RUNTIME_PM_OPS(axi_dma_runtime_suspend, axi_dma_runtime_resume, NULL)
>> };
>>
>> +static const struct axi_dma_chip_config jh7110_chip_config = {
>> + .rst_init = jh7110_rst_init,
>> + .use_cfg2 = true,
>> +};
>> +
>> static const struct of_device_id dw_dma_of_id_table[] = {
>> { .compatible = "snps,axi-dma-1.01a" },
>> { .compatible = "intel,kmb-axi-dma" },
>> + { .compatible = "starfive,jh7110-axi-dma", .data = &jh7110_chip_config },
>> {}
>> };
>> MODULE_DEVICE_TABLE(of, dw_dma_of_id_table);
>> diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
>> index e9d5eb0fd594..7b404ae9a26a 100644
>> --- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
>> +++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
>> @@ -21,6 +21,7 @@
>> #define DMAC_MAX_CHANNELS 16
>> #define DMAC_MAX_MASTERS 2
>> #define DMAC_MAX_BLK_SIZE 0x200000
>> +#define DMAC_TIMEOUT_US 200000
>>
>> struct dw_axi_dma_hcfg {
>> u32 nr_channels;
>> @@ -33,6 +34,7 @@ struct dw_axi_dma_hcfg {
>> /* Register map for DMAX_NUM_CHANNELS <= 8 */
>> bool reg_map_8_channels;
>> bool restrict_axi_burst_len;
>> + bool use_cfg2;
>> };
>>
>> struct axi_dma_chan {
>> @@ -72,6 +74,11 @@ struct axi_dma_chip {
>> struct dw_axi_dma *dw;
>> };
>>
>> +struct axi_dma_chip_config {
>> + int (*rst_init)(struct platform_device *pdev);
>
> Please just spell reset in full, it's not that much longer.
Okay, this will be modified.
>
>> + bool use_cfg2;
>> +};
>> +
>
> This struct is only used in dw-axi-dmac-platform.c above, so no need
> to add it here.
Okay, will be fixed.
Thank you very much for your review and comment!
Best regards,
Walker
WARNING: multiple messages have this Message-ID (diff)
From: Walker Chen <walker.chen@starfivetech.com>
To: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>,
Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor.dooley@microchip.com>,
Palmer Dabbelt <palmer@dabbelt.com>, <dmaengine@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-riscv@lists.infradead.org>
Subject: Re: [PATCH v3 2/3] dmaengine: dw-axi-dmac: Add support for StarFive JH7110 DMA
Date: Fri, 3 Mar 2023 16:18:04 +0800 [thread overview]
Message-ID: <ffe8f7d0-8f47-859f-e7f8-8343b3ae6330@starfivetech.com> (raw)
In-Reply-To: <CAJM55Z946EVyN50KcBmh7chOOnzwTOjwLR+Z_fCOrfin9j7LNA@mail.gmail.com>
On 2023/2/27 21:47, Emil Renner Berthing wrote:
> On Mon, 27 Feb 2023 at 14:11, Walker Chen <walker.chen@starfivetech.com> wrote:
>>
>> Add DMA reset operation in device probe and use different configuration
>> on CH_CFG registers according to match data.
>>
>> Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
>> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
>
> Hi Walker,
>
> Firstly your Signed-off-by should be the last line.
>
> I may have been unclear in my last review, sorry. I meant to give my
> reviewed-by if you just removed the reset pointer that was never used.
> This new version also adds a lot of new code.
>
> Though, I'm glad you want to update the driver to use match data
> rather than of_device_is_compatible, but then please update all uses
> of of_device_is_compatible. With this patch starfive uses match data
> and the intel,kmb-axi-dma still uses of_device_is_compatible.
Hey Emil, thank you for pointing out these problems for me.
Will be fixed.
> More comments below..
>
>> ---
>> .../dma/dw-axi-dmac/dw-axi-dmac-platform.c | 34 +++++++++++++++++--
>> drivers/dma/dw-axi-dmac/dw-axi-dmac.h | 7 ++++
>> 2 files changed, 39 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
>> index bf85aa0979ec..400eeef707bf 100644
>> --- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
>> +++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
>> @@ -21,10 +21,12 @@
>> #include <linux/kernel.h>
>> #include <linux/module.h>
>> #include <linux/of.h>
>> +#include <linux/of_device.h>
>> #include <linux/of_dma.h>
>> #include <linux/platform_device.h>
>> #include <linux/pm_runtime.h>
>> #include <linux/property.h>
>> +#include <linux/reset.h>
>> #include <linux/slab.h>
>> #include <linux/types.h>
>>
>> @@ -86,7 +88,8 @@ static inline void axi_chan_config_write(struct axi_dma_chan *chan,
>>
>> cfg_lo = (config->dst_multblk_type << CH_CFG_L_DST_MULTBLK_TYPE_POS |
>> config->src_multblk_type << CH_CFG_L_SRC_MULTBLK_TYPE_POS);
>> - if (chan->chip->dw->hdata->reg_map_8_channels) {
>> + if (chan->chip->dw->hdata->reg_map_8_channels &&
>> + !chan->chip->dw->hdata->use_cfg2) {
>> cfg_hi = config->tt_fc << CH_CFG_H_TT_FC_POS |
>> config->hs_sel_src << CH_CFG_H_HS_SEL_SRC_POS |
>> config->hs_sel_dst << CH_CFG_H_HS_SEL_DST_POS |
>> @@ -1142,7 +1145,7 @@ static int dma_chan_terminate_all(struct dma_chan *dchan)
>> axi_chan_disable(chan);
>>
>> ret = readl_poll_timeout_atomic(chan->chip->regs + DMAC_CHEN, val,
>> - !(val & chan_active), 1000, 10000);
>> + !(val & chan_active), 1000, DMAC_TIMEOUT_US);
>> if (ret == -ETIMEDOUT)
>> dev_warn(dchan2dev(dchan),
>> "%s failed to stop\n", axi_chan_name(chan));
>> @@ -1367,6 +1370,17 @@ static int parse_device_properties(struct axi_dma_chip *chip)
>> return 0;
>> }
>>
>> +static int jh7110_rst_init(struct platform_device *pdev)
>> +{
>> + struct reset_control *resets;
>> +
>> + resets = devm_reset_control_array_get_exclusive(&pdev->dev);
>> + if (IS_ERR(resets))
>> + return PTR_ERR(resets);
>> +
>> + return reset_control_deassert(resets);
>> +}
>> +
>> static int dw_probe(struct platform_device *pdev)
>> {
>> struct device_node *node = pdev->dev.of_node;
>> @@ -1374,6 +1388,7 @@ static int dw_probe(struct platform_device *pdev)
>> struct resource *mem;
>> struct dw_axi_dma *dw;
>> struct dw_axi_dma_hcfg *hdata;
>> + const struct axi_dma_chip_config *ccfg;
>> u32 i;
>> int ret;
>>
>> @@ -1416,6 +1431,15 @@ static int dw_probe(struct platform_device *pdev)
>> if (IS_ERR(chip->cfgr_clk))
>> return PTR_ERR(chip->cfgr_clk);
>>
>> + ccfg = of_device_get_match_data(&pdev->dev);
>> + if (ccfg) {
>> + ret = ccfg->rst_init(pdev);
>> + if (ret)
>> + return ret;
>> +
>> + chip->dw->hdata->use_cfg2 = ccfg->use_cfg2;
>> + }
>> +
>> ret = parse_device_properties(chip);
>> if (ret)
>> return ret;
>> @@ -1557,9 +1581,15 @@ static const struct dev_pm_ops dw_axi_dma_pm_ops = {
>> SET_RUNTIME_PM_OPS(axi_dma_runtime_suspend, axi_dma_runtime_resume, NULL)
>> };
>>
>> +static const struct axi_dma_chip_config jh7110_chip_config = {
>> + .rst_init = jh7110_rst_init,
>> + .use_cfg2 = true,
>> +};
>> +
>> static const struct of_device_id dw_dma_of_id_table[] = {
>> { .compatible = "snps,axi-dma-1.01a" },
>> { .compatible = "intel,kmb-axi-dma" },
>> + { .compatible = "starfive,jh7110-axi-dma", .data = &jh7110_chip_config },
>> {}
>> };
>> MODULE_DEVICE_TABLE(of, dw_dma_of_id_table);
>> diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
>> index e9d5eb0fd594..7b404ae9a26a 100644
>> --- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
>> +++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
>> @@ -21,6 +21,7 @@
>> #define DMAC_MAX_CHANNELS 16
>> #define DMAC_MAX_MASTERS 2
>> #define DMAC_MAX_BLK_SIZE 0x200000
>> +#define DMAC_TIMEOUT_US 200000
>>
>> struct dw_axi_dma_hcfg {
>> u32 nr_channels;
>> @@ -33,6 +34,7 @@ struct dw_axi_dma_hcfg {
>> /* Register map for DMAX_NUM_CHANNELS <= 8 */
>> bool reg_map_8_channels;
>> bool restrict_axi_burst_len;
>> + bool use_cfg2;
>> };
>>
>> struct axi_dma_chan {
>> @@ -72,6 +74,11 @@ struct axi_dma_chip {
>> struct dw_axi_dma *dw;
>> };
>>
>> +struct axi_dma_chip_config {
>> + int (*rst_init)(struct platform_device *pdev);
>
> Please just spell reset in full, it's not that much longer.
Okay, this will be modified.
>
>> + bool use_cfg2;
>> +};
>> +
>
> This struct is only used in dw-axi-dmac-platform.c above, so no need
> to add it here.
Okay, will be fixed.
Thank you very much for your review and comment!
Best regards,
Walker
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2023-03-03 8:18 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-27 13:10 [PATCH v3 0/3] Add DMA driver for StarFive JH7110 SoC Walker Chen
2023-02-27 13:10 ` Walker Chen
2023-02-27 13:10 ` [PATCH v3 1/3] dt-bindings: dma: snps,dw-axi-dmac: constrain minItems/maxItems of resets for JH7110 DMA Walker Chen
2023-02-27 13:10 ` Walker Chen
2023-02-28 15:37 ` Rob Herring
2023-02-28 15:37 ` Rob Herring
2023-03-03 8:24 ` Walker Chen
2023-03-03 8:24 ` Walker Chen
2023-02-27 13:10 ` [PATCH v3 2/3] dmaengine: dw-axi-dmac: Add support for StarFive " Walker Chen
2023-02-27 13:10 ` Walker Chen
2023-02-27 13:47 ` Emil Renner Berthing
2023-02-27 13:47 ` Emil Renner Berthing
2023-03-03 8:18 ` Walker Chen [this message]
2023-03-03 8:18 ` Walker Chen
2023-02-27 13:10 ` [PATCH v3 3/3] riscv: dts: starfive: add dma controller node Walker Chen
2023-02-27 13:10 ` Walker Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ffe8f7d0-8f47-859f-e7f8-8343b3ae6330@starfivetech.com \
--to=walker.chen@starfivetech.com \
--cc=Eugeniy.Paltsev@synopsys.com \
--cc=conor.dooley@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=emil.renner.berthing@canonical.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.