Build problems

Build problems

[Paolo Cremonese]

Hi all.
I'm new in Openembedded.
I'm trying to build an image ( bitbake opie-image), and I get errors.
In the following the output of bitbake:

Can anyone help me?

Thanks in advance,
Paolo



NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it
to increase performance.
NOTE: Handling BitBake files: \ (6411/6411) [100 %]
NOTE: Parsing finished. 6140 cached, 0 parsed, 271 skipped, 0 masked.
NOTE: Cache is clean, not saving.
NOTE: build 200901271107: started

OE Build Configuration:
BB_VERSION        = "1.8.13"
METADATA_BRANCH   = "org.openembedded.dev"
METADATA_REVISION = "a41bdd6cda499d2629ce2a156348620b7ab7afc4"
TARGET_ARCH       = "i686"
TARGET_OS         = "linux"
MACHINE           = "i686-generic"
DISTRO            = "minimal"
DISTRO_VERSION    = ".dev-snapshot-20090127"
TARGET_FPU        = ""

NOTE: Resolving any missing task queue dependencies
NOTE: multiple providers are available for virtual/i686-linux-binutils
(binutils-cross, external-toolchain);
NOTE: consider defining PREFERRED_PROVIDER_virtual/i686-linux-binutils
NOTE: multiple providers are available for virtual/libqte2
(qte-mt-static, qte, qte-mt);
NOTE: consider defining PREFERRED_PROVIDER_virtual/libqte2
NOTE: multiple providers are available for
virtual/i686-linux-libc-initial (glibc-initial, eglibc-initial);
NOTE: consider defining
PREFERRED_PROVIDER_virtual/i686-linux-libc-initial
NOTE: multiple providers are available for gconf (gconf, gconf-dbus);
NOTE: consider defining PREFERRED_PROVIDER_gconf
NOTE: multiple providers are available for avahi (avahi, avahi-python);
NOTE: consider defining PREFERRED_PROVIDER_avahi
NOTE: multiple providers are available for virtual/db (db3, db);
NOTE: consider defining PREFERRED_PROVIDER_virtual/db
NOTE: multiple providers are available for virtual/db-native
(db3-native, db-native);
NOTE: consider defining PREFERRED_PROVIDER_virtual/db-native
NOTE: multiple providers are available for gtk+ (gtk+, gtk
+-fastscaling);
NOTE: consider defining PREFERRED_PROVIDER_gtk+
NOTE: Preparing runqueue
NOTE: Executing runqueue
NOTE: Running task 60 of 2525 (ID:
1007, /home/paolo/oe/stuff/openembedded/packages/pkgconfig/pkgconfig-native_0.22.bb, do_setscene)
NOTE: package pkgconfig-native-0.22: started
NOTE: package pkgconfig-native-0.22-r7: task do_setscene: started
NOTE: package pkgconfig-native-0.22-r7: task do_setscene: completed
NOTE: package pkgconfig-native-0.22: completed
NOTE: Running task 61 of 2525 (ID:
1008, /home/paolo/oe/stuff/openembedded/packages/pkgconfig/pkgconfig-native_0.22.bb, do_fetch)
NOTE: package pkgconfig-native-0.22: started
NOTE: package pkgconfig-native-0.22-r7: task do_fetch: started
NOTE: fetch
http://pkgconfig.freedesktop.org/releases/pkg-config-0.22.tar.gz
--11:09:10--
http://pkgconfig.freedesktop.org/releases/pkg-config-0.22.tar.gz
           => `/home/paolo/sources/pkg-config-0.22.tar.gz'
Resolving pkgconfig.freedesktop.org... 131.252.210.176
Connecting to pkgconfig.freedesktop.org|131.252.210.176|:80...
connected.
HTTP request sent, awaiting response... 200 OK
Length: 1,006,425 (983K) [application/x-gzip]

100%[====================================>] 1,006,425    206.02K/s
ETA 00:00

11:09:16 (181.24 KB/s) - `/home/paolo/sources/pkg-config-0.22.tar.gz'
saved [1006425/1006425]

NOTE: package pkgconfig-native-0.22-r7: task do_fetch: completed
NOTE: package pkgconfig-native-0.22: completed
NOTE: Running task 62 of 2525 (ID:
1009, /home/paolo/oe/stuff/openembedded/packages/pkgconfig/pkgconfig-native_0.22.bb, do_unpack)
NOTE: package pkgconfig-native-0.22: started
NOTE: package pkgconfig-native-0.22-r7: task do_unpack: started
NOTE: Unpacking /home/paolo/sources/pkg-config-0.22.tar.gz
to /home/paolo/oe/stuff/build/tmp/work/i686-linux/pkgconfig-native-0.22-r7/
NOTE:
Unpacking /home/paolo/oe/stuff/openembedded/packages/pkgconfig/pkgconfig-0.22/glibconfig-sysdefs.h to /home/paolo/oe/stuff/build/tmp/work/i686-linux/pkgconfig-native-0.22-r7/
NOTE: package pkgconfig-native-0.22-r7: task do_unpack: completed
NOTE: package pkgconfig-native-0.22: completed
NOTE: Running task 64 of 2525 (ID:
1131, /home/paolo/oe/stuff/openembedded/packages/libtool/libtool-cross_1.5.10.bb, do_configure)
NOTE: package libtool-cross-1.5.10: started
NOTE: package libtool-cross-1.5.10-r10: task do_configure: started
ERROR: function do_configure failed
ERROR: log data follows
(/home/paolo/oe/stuff/build/tmp/work/i686-linux/libtool-cross-1.5.10-r10/temp/log.do_configure.7933)
| automake (GNU automake) 1.9.3
| Written by Tom Tromey <tromey@redhat.com>.
| 
| Copyright 2004 Free Software Foundation, Inc.
| This is free software; see the source for copying conditions.  There
is NO
| warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE.
| AUTOV is 1.9
| NOTE: Executing autoreconf --verbose --install --force
--exclude=libtoolize
-I /home/paolo/oe/stuff/build/tmp/work/i686-linux/libtool-cross-1.5.10-r10/libtool-1.5.10/ -I/home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/share/aclocal-1.9 -I /home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/share/aclocal
| autoreconf: Entering directory `.'
| autoreconf: configure.ac: not using Gettext
| autoreconf: running: aclocal
-I /home/paolo/oe/stuff/build/tmp/work/i686-linux/libtool-cross-1.5.10-r10/libtool-1.5.10/ -I /home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/share/aclocal-1.9 -I /home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/share/aclocal --force
| autoreconf: configure.ac: tracing
| autoreconf: configure.ac: adding subdirectory libltdl to autoreconf
| autoreconf: Entering directory `libltdl'
| autoreconf:
running: /home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/bin/autoconf --include=/home/paolo/oe/stuff/build/tmp/work/i686-linux/libtool-cross-1.5.10-r10/libtool-1.5.10/ --include=/home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/share/aclocal-1.9 --include=/home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/share/aclocal --force --warnings=cross
| autoreconf:
running: /home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/bin/autoheader --include=/home/paolo/oe/stuff/build/tmp/work/i686-linux/libtool-cross-1.5.10-r10/libtool-1.5.10/ --include=/home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/share/aclocal-1.9 --include=/home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/share/aclocal --force --warnings=cross
| autoreconf: running: automake --foreign --add-missing --copy
--force-missing --warnings=cross
| automake: unknown warning category `cross'
| autoreconf: running: gnu-configize
| autoreconf: Leaving directory `libltdl'
| autoreconf: configure.ac: not using Autoheader
| automake: unknown warning category `cross'
| autoreconf: Leaving directory `.'
| NOTE:
Running /home/paolo/oe/stuff/build/tmp/work/i686-linux/libtool-cross-1.5.10-r10/libtool-1.5.10/configure 		    --build=i686-linux 		    --host=i686-linux 		    --target=i686-linux 		    --prefix=/home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr 		    --exec_prefix=/home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr 		    --bindir=/home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/bin 		    --sbindir=/usr/sbin 		    --libexecdir=/usr/libexec 		    --datadir=/usr/share 		    --sysconfdir=/etc 		    --sharedstatedir=/usr/com 		    --localstatedir=/var 		    --libdir=/usr/lib 		    --includedir=/usr/include 		    --oldincludedir=/usr/include 		    --infodir=/usr/share/info 		    --mandir=/usr/share/man 			 		    ...
| configure: loading site
script /home/paolo/oe/stuff/openembedded/site/endian-little
| configure: loading site
script /home/paolo/oe/stuff/openembedded/site/common-linux
| configure: loading site
script /home/paolo/oe/stuff/openembedded/site/common-glibc
| configure: loading site
script /home/paolo/oe/stuff/openembedded/site/ix86-common
| configure: loading site
script /home/paolo/oe/stuff/openembedded/site/common
| configure: loading site
script /home/paolo/oe/stuff/openembedded/site/common
| checking for a BSD-compatible install... /usr/bin/install -c
| checking whether build environment is sane... yes
| checking for gawk... gawk
| checking whether make sets $(MAKE)... yes
| checking for i686-linux-gcc... ccache i686-linux-gcc -march=pentiumpro
| checking for C compiler default output file name...
| configure: error: C compiler cannot create executables
| See `config.log' for more details.
| FATAL: oe_runconf failed
NOTE: Task
failed: /home/paolo/oe/stuff/build/tmp/work/i686-linux/libtool-cross-1.5.10-r10/temp/log.do_configure.7933
NOTE: package libtool-cross-1.5.10-r10: task do_configure: failed
ERROR: TaskFailed event exception, aborting
NOTE: package libtool-cross-1.5.10: failed
ERROR: Build
of /home/paolo/oe/stuff/openembedded/packages/libtool/libtool-cross_1.5.10.bb do_configure failed
ERROR: Task 1131
(/home/paolo/oe/stuff/openembedded/packages/libtool/libtool-cross_1.5.10.bb, do_configure) failed
NOTE: Tasks Summary: Attempted 63 tasks of which 60 didn't need to be
rerun and 1 failed.
ERROR:
'/home/paolo/oe/stuff/openembedded/packages/libtool/libtool-cross_1.5.10.bb' failed
NOTE: build 200901271107: completed
paolo@ubuntu2:~/oe/stuff/build$ 

Re: Build problems

[Charlton, John]

You might try the angstrom-2008.1 DISTRO with the org.openembedded.dev branch Or angstrom-2007.1 with the org.openembedded.stable branch.  I have built oe for the "i686-generic" MACHINE with the angstrom-2007.1 with some problems but the Angstrom distro seems to define all of the things you need to do the build.

--John

-----Original Message-----
From: openembedded-devel-bounces@lists.openembedded.org [mailto:openembedded-devel-bounces@lists.openembedded.org] On Behalf Of Paolo Cremonese
Sent: Tuesday, January 27, 2009 7:26 AM
To: openembedded-devel@lists.openembedded.org
Subject: [oe] Build problems

Hi all.
I'm new in Openembedded.
I'm trying to build an image ( bitbake opie-image), and I get errors.
In the following the output of bitbake:

Can anyone help me?

Thanks in advance,
Paolo



NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it to increase performance.
NOTE: Handling BitBake files: \ (6411/6411) [100 %]
NOTE: Parsing finished. 6140 cached, 0 parsed, 271 skipped, 0 masked.
NOTE: Cache is clean, not saving.
NOTE: build 200901271107: started

OE Build Configuration:
BB_VERSION        = "1.8.13"
METADATA_BRANCH   = "org.openembedded.dev"
METADATA_REVISION = "a41bdd6cda499d2629ce2a156348620b7ab7afc4"
TARGET_ARCH       = "i686"
TARGET_OS         = "linux"
MACHINE           = "i686-generic"
DISTRO            = "minimal"
DISTRO_VERSION    = ".dev-snapshot-20090127"
TARGET_FPU        = ""

NOTE: Resolving any missing task queue dependencies
NOTE: multiple providers are available for virtual/i686-linux-binutils (binutils-cross, external-toolchain);
NOTE: consider defining PREFERRED_PROVIDER_virtual/i686-linux-binutils
NOTE: multiple providers are available for virtual/libqte2 (qte-mt-static, qte, qte-mt);
NOTE: consider defining PREFERRED_PROVIDER_virtual/libqte2
NOTE: multiple providers are available for virtual/i686-linux-libc-initial (glibc-initial, eglibc-initial);
NOTE: consider defining
PREFERRED_PROVIDER_virtual/i686-linux-libc-initial
NOTE: multiple providers are available for gconf (gconf, gconf-dbus);
NOTE: consider defining PREFERRED_PROVIDER_gconf
NOTE: multiple providers are available for avahi (avahi, avahi-python);
NOTE: consider defining PREFERRED_PROVIDER_avahi
NOTE: multiple providers are available for virtual/db (db3, db);
NOTE: consider defining PREFERRED_PROVIDER_virtual/db
NOTE: multiple providers are available for virtual/db-native (db3-native, db-native);
NOTE: consider defining PREFERRED_PROVIDER_virtual/db-native
NOTE: multiple providers are available for gtk+ (gtk+, gtk
+-fastscaling);
NOTE: consider defining PREFERRED_PROVIDER_gtk+
NOTE: Preparing runqueue
NOTE: Executing runqueue
NOTE: Running task 60 of 2525 (ID:
1007, /home/paolo/oe/stuff/openembedded/packages/pkgconfig/pkgconfig-native_0.22.bb, do_setscene)
NOTE: package pkgconfig-native-0.22: started
NOTE: package pkgconfig-native-0.22-r7: task do_setscene: started
NOTE: package pkgconfig-native-0.22-r7: task do_setscene: completed
NOTE: package pkgconfig-native-0.22: completed
NOTE: Running task 61 of 2525 (ID:
1008, /home/paolo/oe/stuff/openembedded/packages/pkgconfig/pkgconfig-native_0.22.bb, do_fetch)
NOTE: package pkgconfig-native-0.22: started
NOTE: package pkgconfig-native-0.22-r7: task do_fetch: started
NOTE: fetch
http://pkgconfig.freedesktop.org/releases/pkg-config-0.22.tar.gz
--11:09:10--
http://pkgconfig.freedesktop.org/releases/pkg-config-0.22.tar.gz
           => `/home/paolo/sources/pkg-config-0.22.tar.gz'
Resolving pkgconfig.freedesktop.org... 131.252.210.176 Connecting to pkgconfig.freedesktop.org|131.252.210.176|:80...
connected.
HTTP request sent, awaiting response... 200 OK
Length: 1,006,425 (983K) [application/x-gzip]

100%[====================================>] 1,006,425    206.02K/s
ETA 00:00

11:09:16 (181.24 KB/s) - `/home/paolo/sources/pkg-config-0.22.tar.gz'
saved [1006425/1006425]

NOTE: package pkgconfig-native-0.22-r7: task do_fetch: completed
NOTE: package pkgconfig-native-0.22: completed
NOTE: Running task 62 of 2525 (ID:
1009, /home/paolo/oe/stuff/openembedded/packages/pkgconfig/pkgconfig-native_0.22.bb, do_unpack)
NOTE: package pkgconfig-native-0.22: started
NOTE: package pkgconfig-native-0.22-r7: task do_unpack: started
NOTE: Unpacking /home/paolo/sources/pkg-config-0.22.tar.gz
to /home/paolo/oe/stuff/build/tmp/work/i686-linux/pkgconfig-native-0.22-r7/
NOTE:
Unpacking /home/paolo/oe/stuff/openembedded/packages/pkgconfig/pkgconfig-0.22/glibconfig-sysdefs.h to /home/paolo/oe/stuff/build/tmp/work/i686-linux/pkgconfig-native-0.22-r7/
NOTE: package pkgconfig-native-0.22-r7: task do_unpack: completed
NOTE: package pkgconfig-native-0.22: completed
NOTE: Running task 64 of 2525 (ID:
1131, /home/paolo/oe/stuff/openembedded/packages/libtool/libtool-cross_1.5.10.bb, do_configure)
NOTE: package libtool-cross-1.5.10: started
NOTE: package libtool-cross-1.5.10-r10: task do_configure: started
ERROR: function do_configure failed
ERROR: log data follows
(/home/paolo/oe/stuff/build/tmp/work/i686-linux/libtool-cross-1.5.10-r10/temp/log.do_configure.7933)
| automake (GNU automake) 1.9.3
| Written by Tom Tromey <tromey@redhat.com>.
| 
| Copyright 2004 Free Software Foundation, Inc.
| This is free software; see the source for copying conditions.  There
is NO
| warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE.
| AUTOV is 1.9
| NOTE: Executing autoreconf --verbose --install --force
--exclude=libtoolize
-I /home/paolo/oe/stuff/build/tmp/work/i686-linux/libtool-cross-1.5.10-r10/libtool-1.5.10/ -I/home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/share/aclocal-1.9 -I /home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/share/aclocal
| autoreconf: Entering directory `.'
| autoreconf: configure.ac: not using Gettext
| autoreconf: running: aclocal
-I /home/paolo/oe/stuff/build/tmp/work/i686-linux/libtool-cross-1.5.10-r10/libtool-1.5.10/ -I /home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/share/aclocal-1.9 -I /home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/share/aclocal --force
| autoreconf: configure.ac: tracing
| autoreconf: configure.ac: adding subdirectory libltdl to autoreconf
| autoreconf: Entering directory `libltdl'
| autoreconf:
running: /home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/bin/autoconf --include=/home/paolo/oe/stuff/build/tmp/work/i686-linux/libtool-cross-1.5.10-r10/libtool-1.5.10/ --include=/home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/share/aclocal-1.9 --include=/home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/share/aclocal --force --warnings=cross
| autoreconf:
running: /home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/bin/autoheader --include=/home/paolo/oe/stuff/build/tmp/work/i686-linux/libtool-cross-1.5.10-r10/libtool-1.5.10/ --include=/home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/share/aclocal-1.9 --include=/home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/share/aclocal --force --warnings=cross
| autoreconf: running: automake --foreign --add-missing --copy
--force-missing --warnings=cross
| automake: unknown warning category `cross'
| autoreconf: running: gnu-configize
| autoreconf: Leaving directory `libltdl'
| autoreconf: configure.ac: not using Autoheader
| automake: unknown warning category `cross'
| autoreconf: Leaving directory `.'
| NOTE:
Running /home/paolo/oe/stuff/build/tmp/work/i686-linux/libtool-cross-1.5.10-r10/libtool-1.5.10/configure 		    --build=i686-linux 		    --host=i686-linux 		    --target=i686-linux 		    --prefix=/home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr 		    --exec_prefix=/home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr 		    --bindir=/home/paolo/oe/stuff/build/tmp/staging/i686-linux/usr/bin 		    --sbindir=/usr/sbin 		    --libexecdir=/usr/libexec 		    --datadir=/usr/share 		    --sysconfdir=/etc 		    --sharedstatedir=/usr/com 		    --localstatedir=/var 		    --libdir=/usr/lib 		    --includedir=/usr/include 		    --oldincludedir=/usr/include 		    --infodir=/usr/share/info 		    --mandir=/usr/share/man 			 		    ...
| configure: loading site
script /home/paolo/oe/stuff/openembedded/site/endian-little
| configure: loading site
script /home/paolo/oe/stuff/openembedded/site/common-linux
| configure: loading site
script /home/paolo/oe/stuff/openembedded/site/common-glibc
| configure: loading site
script /home/paolo/oe/stuff/openembedded/site/ix86-common
| configure: loading site
script /home/paolo/oe/stuff/openembedded/site/common
| configure: loading site
script /home/paolo/oe/stuff/openembedded/site/common
| checking for a BSD-compatible install... /usr/bin/install -c checking 
| whether build environment is sane... yes checking for gawk... gawk 
| checking whether make sets $(MAKE)... yes checking for 
| i686-linux-gcc... ccache i686-linux-gcc -march=pentiumpro checking for 
| C compiler default output file name...
| configure: error: C compiler cannot create executables See 
| `config.log' for more details.
| FATAL: oe_runconf failed
NOTE: Task
failed: /home/paolo/oe/stuff/build/tmp/work/i686-linux/libtool-cross-1.5.10-r10/temp/log.do_configure.7933
NOTE: package libtool-cross-1.5.10-r10: task do_configure: failed
ERROR: TaskFailed event exception, aborting
NOTE: package libtool-cross-1.5.10: failed
ERROR: Build
of /home/paolo/oe/stuff/openembedded/packages/libtool/libtool-cross_1.5.10.bb do_configure failed
ERROR: Task 1131
(/home/paolo/oe/stuff/openembedded/packages/libtool/libtool-cross_1.5.10.bb, do_configure) failed
NOTE: Tasks Summary: Attempted 63 tasks of which 60 didn't need to be rerun and 1 failed.
ERROR:
'/home/paolo/oe/stuff/openembedded/packages/libtool/libtool-cross_1.5.10.bb' failed
NOTE: build 200901271107: completed
paolo@ubuntu2:~/oe/stuff/build$ 




_______________________________________________
Openembedded-devel mailing list
Openembedded-devel@lists.openembedded.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Re: Build problems

[Marco Cavallini]

Paolo Cremonese ha scritto:
> Hi all.
> I'm new in Openembedded.
> I'm trying to build an image ( bitbake opie-image), and I get errors.
> In the following the output of bitbake:
> 
> Can anyone help me?
> 
> Thanks in advance,
> Paolo
> 
> 
> 
> NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it
> to increase performance.
> NOTE: Handling BitBake files: \ (6411/6411) [100 %]
> NOTE: Parsing finished. 6140 cached, 0 parsed, 271 skipped, 0 masked.
> NOTE: Cache is clean, not saving.
> NOTE: build 200901271107: started
> 
> OE Build Configuration:
> BB_VERSION        = "1.8.13"
> METADATA_BRANCH   = "org.openembedded.dev"
> METADATA_REVISION = "a41bdd6cda499d2629ce2a156348620b7ab7afc4"
> TARGET_ARCH       = "i686"
> TARGET_OS         = "linux"
> MACHINE           = "i686-generic"
> DISTRO            = "minimal"
> DISTRO_VERSION    = ".dev-snapshot-20090127"
> TARGET_FPU        = ""

It might be worth trying with "bitbake minimal-image" to start with,
just to see if basic system works.
I just built an i586-generic angstrom-2008.1 DISTRO with the
org.openembedded.dev branch and it works.

Ciao
--
Marco Cavallini | KOAN sas | Bergamo - Italia
 embedded and real-time software engineering
Phone:+39-035-255.235 - Fax:+39-178-22.39.748
      http://www.KoanSoftware.com

Re: Build problems

[Paolo Cremonese]

OK, I have built the image wihout errors, thank you.

Now, what I have to do to create a bootable compact flash with the
image?

Thanks in advance,
Paolo


On mar, 2009-01-27 at 14:35 +0100, Marco Cavallini wrote:
> Paolo Cremonese ha scritto:
> > Hi all.
> > I'm new in Openembedded.
> > I'm trying to build an image ( bitbake opie-image), and I get errors.
> > In the following the output of bitbake:
> > 
> > Can anyone help me?
> > 
> > Thanks in advance,
> > Paolo
> > 
> > 
> > 
> > NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it
> > to increase performance.
> > NOTE: Handling BitBake files: \ (6411/6411) [100 %]
> > NOTE: Parsing finished. 6140 cached, 0 parsed, 271 skipped, 0 masked.
> > NOTE: Cache is clean, not saving.
> > NOTE: build 200901271107: started
> > 
> > OE Build Configuration:
> > BB_VERSION        = "1.8.13"
> > METADATA_BRANCH   = "org.openembedded.dev"
> > METADATA_REVISION = "a41bdd6cda499d2629ce2a156348620b7ab7afc4"
> > TARGET_ARCH       = "i686"
> > TARGET_OS         = "linux"
> > MACHINE           = "i686-generic"
> > DISTRO            = "minimal"
> > DISTRO_VERSION    = ".dev-snapshot-20090127"
> > TARGET_FPU        = ""
> 
> It might be worth trying with "bitbake minimal-image" to start with,
> just to see if basic system works.
> I just built an i586-generic angstrom-2008.1 DISTRO with the
> org.openembedded.dev branch and it works.
> 
> Ciao
> --
> Marco Cavallini | KOAN sas | Bergamo - Italia
>  embedded and real-time software engineering
> Phone:+39-035-255.235 - Fax:+39-178-22.39.748
>       http://www.KoanSoftware.com
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Re: Build problems

[Marco Cavallini]

Paolo Cremonese ha scritto:
> OK, I have built the image wihout errors, thank you.
> 
> Now, what I have to do to create a bootable compact flash with the
> image?
> 
> Thanks in advance,
> Paolo

Paolo,
I'm just working on a system like your, but with i486.

1. prtition your CF
2. format CF ext3
3. load (untar) yourimage.tar into CF
4. install bootloader (GRUB)[1]

[1] GRUB build in OE is broken at the moment, I'm patching it ;-)

Cordiali Saluti / Kindest Regards / mit freundlichen Grüssen
--
Marco Cavallini | KOAN sas | Bergamo - Italia
 embedded and real-time software engineering
Phone:+39-035-255.235 - Fax:+39-178-22.39.748
      http://www.KoanSoftware.com

Re: Build problems

[Elena of Valhalla]

On Wed, Jan 28, 2009 at 10:49 AM, Paolo Cremonese <pisa.t@teledata-i.com> wrote:
> Now, what I have to do to create a bootable compact flash with the
> image?

What image format did you build? I've found that the easier way to
create a bootable compact flash would be to build the .tar image,
format the CF as ext(2|3), extract the contents of the tarball in the
mounted CF and then install extlinux on it

-- 
Elena ``of Valhalla''

email: elena.valhalla@gmail.com

Re: Build problems

[Paolo Cremonese]

OK, I done all but GRUB.

My CF is connected through an USB adapter, and is seen as /dev/sdb

I can navigate into the filesystem.

I try to install GRUB using

sudo grub-install /dev/sdb

but the answer is

/dev/sdb does not have any corresponding BIOS drive.

Do I have necessarly to connect the CF using an IDE port?

Thanks in advance.

Ciao,
Paolo


On mer, 2009-01-28 at 11:03 +0100, Marco Cavallini wrote:
> Paolo Cremonese ha scritto:
> > OK, I have built the image wihout errors, thank you.
> > 
> > Now, what I have to do to create a bootable compact flash with the
> > image?
> > 
> > Thanks in advance,
> > Paolo
> 
> Paolo,
> I'm just working on a system like your, but with i486.
> 
> 1. prtition your CF
> 2. format CF ext3
> 3. load (untar) yourimage.tar into CF
> 4. install bootloader (GRUB)[1]
> 
> [1] GRUB build in OE is broken at the moment, I'm patching it ;-)
> 
> Cordiali Saluti / Kindest Regards / mit freundlichen Grüssen
> --
> Marco Cavallini | KOAN sas | Bergamo - Italia
>  embedded and real-time software engineering
> Phone:+39-035-255.235 - Fax:+39-178-22.39.748
>       http://www.KoanSoftware.com
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Re: Build problems

[Yuri Bushmelev]

Hello!

> I try to install GRUB using
>
> sudo grub-install /dev/sdb
>
> but the answer is
>
> /dev/sdb does not have any corresponding BIOS drive.

Try with --recheck-devices or something like (look at grub-install --help).

-- 
Yuri Bushmelev

Re: Build problems

[Marco Cavallini]

> On mer, 2009-01-28 at 11:03 +0100, Marco Cavallini wrote:
>> Paolo Cremonese ha scritto:
>>> OK, I have built the image wihout errors, thank you.
>>>
>>> Now, what I have to do to create a bootable compact flash with the
>>> image?
>>>
>>> Thanks in advance,
>>> Paolo
>> Paolo,
>> I'm just working on a system like your, but with i486.
>>
>> 1. prtition your CF
>> 2. format CF ext3
>> 3. load (untar) yourimage.tar into CF
>> 4. install bootloader (GRUB)[1]
>>
>> [1] GRUB build in OE is broken at the moment, I'm patching it ;-)
>>

GRUB patch is ready and should be pushed soon by hrw.

Cordiali Saluti / Kindest Regards / mit freundlichen Grüssen
--
Marco Cavallini | KOAN sas | Bergamo - Italia
 embedded and real-time software engineering
   Atmel third party certified consultant
Phone:+39-035-255.235 - Fax:+39-178-22.39.748
      http://www.KoanSoftware.com

Re: Build problems

[Paolo Cremonese]

Fine, waiting for GRUB patch. (what is "hrw" ?)

My target has not hard disk, only CF.
To run the image, do I need a RAMFS ?
And in this case, I have to add it to the GRUB "menu.lst" ?


title		Test Minimalist Image Angstrom
root		(hd0,0)
kernel		/boot/bzImage-2.6.21
initrd		/boot/initrd.img root=/dev/ram0 rw init=/linuxrc



Ciao,
Paolo

On ven, 2009-01-30 at 17:33 +0100, Marco Cavallini wrote:
> > On mer, 2009-01-28 at 11:03 +0100, Marco Cavallini wrote:
> >> Paolo Cremonese ha scritto:
> >>> OK, I have built the image wihout errors, thank you.
> >>>
> >>> Now, what I have to do to create a bootable compact flash with the
> >>> image?
> >>>
> >>> Thanks in advance,
> >>> Paolo
> >> Paolo,
> >> I'm just working on a system like your, but with i486.
> >>
> >> 1. prtition your CF
> >> 2. format CF ext3
> >> 3. load (untar) yourimage.tar into CF
> >> 4. install bootloader (GRUB)[1]
> >>
> >> [1] GRUB build in OE is broken at the moment, I'm patching it ;-)
> >>
> 
> GRUB patch is ready and should be pushed soon by hrw.
> 
> Cordiali Saluti / Kindest Regards / mit freundlichen Grüssen
> --
> Marco Cavallini | KOAN sas | Bergamo - Italia
>  embedded and real-time software engineering
>    Atmel third party certified consultant
> Phone:+39-035-255.235 - Fax:+39-178-22.39.748
>       http://www.KoanSoftware.com
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Re: Build problems

[Ihar Hrachyshka]

On Mon, Feb 2, 2009 at 4:57 PM, Paolo Cremonese <pisa.t@teledata-i.com> wrote:
> (what is "hrw" ?)
hrw is Marcin Juszkiewicz :D

Re: Build problems

[Marco Cavallini]

Paolo Cremonese ha scritto:
> Fine, waiting for GRUB patch. (what is "hrw" ?)
> 
> My target has not hard disk, only CF.
> To run the image, do I need a RAMFS ?
> And in this case, I have to add it to the GRUB "menu.lst" ?

Paolo,
hrw is Marcin Juszkiewicz, an OE developer and mantainer.
GRUB patch was pushed this morning and is ready for use into git mainstream.

Cordiali Saluti / Kindest Regards / mit freundlichen Grüssen
--
Marco Cavallini | KOAN sas | Bergamo - Italia
 embedded and real-time software engineering
   Atmel third party certified consultant
Phone:+39-035-255.235 - Fax:+39-178-22.39.748
      http://www.KoanSoftware.com

Re: Build problems

[Philip Balister]

[-- Attachment #1: Type: text/plain, Size: 255 bytes --]

Ihar Hrachyshka wrote:
> On Mon, Feb 2, 2009 at 4:57 PM, Paolo Cremonese <pisa.t@teledata-i.com> wrote:
>> (what is "hrw" ?)
> hrw is Marcin Juszkiewicz :D

See also:

http://marcin.juszkiewicz.com.pl/2007/04/26/how-to-pronounce-haerwu/

Philip

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/x-pkcs7-signature, Size: 3303 bytes --]

Re: Build problems

[Paolo Cremonese]

Sorry, don't know...

Now the image works !

Then I try to build a gpe-image, but i get an error at the last step.

Thanks in advance,

Paolo



| /home/paolo/oe/stuff/build/tmp/cross/i586/lib/gcc/i586-angstrom-linux/4.2.4/../../../../i586-angstrom-linux/bin/ld:.libs/libgdk_pixbuf-2.0.ver:2: ignoring invalid character `\001' in script
| /home/paolo/oe/stuff/build/tmp/cross/i586/lib/gcc/i586-angstrom-linux/4.2.4/../../../../i586-angstrom-linux/bin/ld:.libs/libgdk_pixbuf-2.0.ver:2: syntax error in VERSION script
| collect2: ld returned 1 exit status
| make[4]: *** [libgdk_pixbuf-2.0.la] Error 1
| make[4]: Leaving directory
`/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/gtk+-2.14.2/gdk-pixbuf'
| make[3]: *** [all-recursive] Error 1
| make[3]: Leaving directory
`/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/gtk+-2.14.2/gdk-pixbuf'
| make[2]: *** [all] Error 2
| make[2]: Leaving directory
`/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/gtk+-2.14.2/gdk-pixbuf'
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory
`/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/gtk+-2.14.2'
| make: *** [all] Error 2
| FATAL: oe_runmake failed
NOTE: Task
failed: /home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/temp/log.do_compile.22403
NOTE: package gtk+-2.14.2-r1: task do_compile: failed
ERROR: TaskFailed event exception, aborting
NOTE: package gtk+-2.14.2: failed
ERROR: Build of /home/paolo/oe/stuff/openembedded/packages/gtk+/gtk
+_2.14.2.bb do_compile failed
ERROR: Task 951 (/home/paolo/oe/stuff/openembedded/packages/gtk+/gtk
+_2.14.2.bb, do_compile) failed
NOTE: Tasks Summary: Attempted 1003 tasks of which 788 didn't need to be
rerun and 1 failed.
ERROR: '/home/paolo/oe/stuff/openembedded/packages/gtk+/gtk+_2.14.2.bb'
failed
NOTE: build 200902040809: completed






On lun, 2009-02-02 at 17:13 +0100, Marco Cavallini wrote:
> Paolo Cremonese ha scritto:
> > Fine, waiting for GRUB patch. (what is "hrw" ?)
> > 
> > My target has not hard disk, only CF.
> > To run the image, do I need a RAMFS ?
> > And in this case, I have to add it to the GRUB "menu.lst" ?
> 
> Paolo,
> hrw is Marcin Juszkiewicz, an OE developer and mantainer.
> GRUB patch was pushed this morning and is ready for use into git mainstream.
> 
> Cordiali Saluti / Kindest Regards / mit freundlichen Grüssen
> --
> Marco Cavallini | KOAN sas | Bergamo - Italia
>  embedded and real-time software engineering
>    Atmel third party certified consultant
> Phone:+39-035-255.235 - Fax:+39-178-22.39.748
>       http://www.KoanSoftware.com
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Re: Build problems

[Koen Kooi]

On 04-02-09 10:27, Paolo Cremonese wrote:
> Sorry, don't know...
>
> Now the image works !
>
> Then I try to build a gpe-image, but i get an error at the last step.

Don't use dash as /bin/sh, use bash and rebuild libtool-cross and gtk+

regards,

Koen

>
> Thanks in advance,
>
> Paolo
>
>
>
> | /home/paolo/oe/stuff/build/tmp/cross/i586/lib/gcc/i586-angstrom-linux/4.2.4/../../../../i586-angstrom-linux/bin/ld:.libs/libgdk_pixbuf-2.0.ver:2: ignoring invalid character `\001' in script
> | /home/paolo/oe/stuff/build/tmp/cross/i586/lib/gcc/i586-angstrom-linux/4.2.4/../../../../i586-angstrom-linux/bin/ld:.libs/libgdk_pixbuf-2.0.ver:2: syntax error in VERSION script
> | collect2: ld returned 1 exit status
> | make[4]: *** [libgdk_pixbuf-2.0.la] Error 1
> | make[4]: Leaving directory
> `/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
> +-2.14.2-r1/gtk+-2.14.2/gdk-pixbuf'
> | make[3]: *** [all-recursive] Error 1
> | make[3]: Leaving directory
> `/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
> +-2.14.2-r1/gtk+-2.14.2/gdk-pixbuf'
> | make[2]: *** [all] Error 2
> | make[2]: Leaving directory
> `/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
> +-2.14.2-r1/gtk+-2.14.2/gdk-pixbuf'
> | make[1]: *** [all-recursive] Error 1
> | make[1]: Leaving directory
> `/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
> +-2.14.2-r1/gtk+-2.14.2'
> | make: *** [all] Error 2
> | FATAL: oe_runmake failed
> NOTE: Task
> failed: /home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
> +-2.14.2-r1/temp/log.do_compile.22403
> NOTE: package gtk+-2.14.2-r1: task do_compile: failed
> ERROR: TaskFailed event exception, aborting
> NOTE: package gtk+-2.14.2: failed
> ERROR: Build of /home/paolo/oe/stuff/openembedded/packages/gtk+/gtk
> +_2.14.2.bb do_compile failed
> ERROR: Task 951 (/home/paolo/oe/stuff/openembedded/packages/gtk+/gtk
> +_2.14.2.bb, do_compile) failed
> NOTE: Tasks Summary: Attempted 1003 tasks of which 788 didn't need to be
> rerun and 1 failed.
> ERROR: '/home/paolo/oe/stuff/openembedded/packages/gtk+/gtk+_2.14.2.bb'
> failed
> NOTE: build 200902040809: completed
>
>
>
>
>
>
> On lun, 2009-02-02 at 17:13 +0100, Marco Cavallini wrote:
>> Paolo Cremonese ha scritto:
>>> Fine, waiting for GRUB patch. (what is "hrw" ?)
>>>
>>> My target has not hard disk, only CF.
>>> To run the image, do I need a RAMFS ?
>>> And in this case, I have to add it to the GRUB "menu.lst" ?
>> Paolo,
>> hrw is Marcin Juszkiewicz, an OE developer and mantainer.
>> GRUB patch was pushed this morning and is ready for use into git mainstream.
>>
>> Cordiali Saluti / Kindest Regards / mit freundlichen Grüssen
>> --
>> Marco Cavallini | KOAN sas | Bergamo - Italia
>>   embedded and real-time software engineering
>>     Atmel third party certified consultant
>> Phone:+39-035-255.235 - Fax:+39-178-22.39.748
>>        http://www.KoanSoftware.com
>>
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Re: Build problems

[Paolo Cremonese]

OK, changed DASH to BASH.
Compiled libtool-cross OK.

compiling gtk+ (bitbake gtk+), fails.

Regards,
Paolo


NOTE: package libxft-2.1.13: completed
NOTE: Running task 1114 of 1553 (ID:
7, /home/paolo/oe/stuff/openembedded/packages/gtk+/gtk+_2.14.2.bb,
do_compile)
NOTE: package gtk+-2.14.2: started
NOTE: package gtk+-2.14.2-r1: task do_compile: started
ERROR: function do_compile failed
ERROR: log data follows
(/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/temp/log.do_compile.15854)
| NOTE: make
| make  all-recursive
| make[1]: Entering directory
`/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/gtk+-2.14.2'
| Making all in po
| make[2]: Entering directory
`/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/gtk+-2.14.2/po'
| make[2]: Nothing to be done for `all'.
| make[2]: Leaving directory
`/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/gtk+-2.14.2/po'
| Making all in po-properties
| make[2]: Entering directory
`/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/gtk+-2.14.2/po-properties'
| make[2]: Nothing to be done for `all'.
| make[2]: Leaving directory
`/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/gtk+-2.14.2/po-properties'
| Making all in gdk-pixbuf
| make[2]: Entering directory
`/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/gtk+-2.14.2/gdk-pixbuf'
| make  all-recursive
| make[3]: Entering directory
`/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/gtk+-2.14.2/gdk-pixbuf'
| Making all in pixops
| make[4]: Entering directory
`/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/gtk+-2.14.2/gdk-pixbuf/pixops'
| make[4]: Nothing to be done for `all'.
| make[4]: Leaving directory
`/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/gtk+-2.14.2/gdk-pixbuf/pixops'
| make[4]: Entering directory
`/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/gtk+-2.14.2/gdk-pixbuf'
| /bin/bash ../i586-angstrom-linux-libtool --tag=CC   --mode=link ccache
i586-angstrom-linux-gcc -march=pentium  -DGDK_PIXBUF_DISABLE_DEPRECATED
-isystem/home/paolo/oe/stuff/build/tmp/staging/i586-angstrom-linux/usr/include -fexpensive-optimizations -frename-registers -fomit-frame-pointer -O2 -Wall  -version-info 1400:2:1400 -export-symbols-regex "^[^_].*"   -L/home/paolo/oe/stuff/build/tmp/staging/i586-angstrom-linux/usr/lib -Wl,-rpath-link,/home/paolo/oe/stuff/build/tmp/staging/i586-angstrom-linux/usr/lib -Wl,-O1 -Wl,--hash-style=gnu -o libgdk_pixbuf-2.0.la -rpath /usr/lib gdk-pixbuf.lo gdk-pixbuf-animation.lo gdk-pixbuf-data.lo gdk-pixbuf-io.lo gdk-pixbuf-loader.lo gdk-pixbuf-scale.lo gdk-pixbuf-simple-anim.lo gdk-pixbuf-scaled-anim.lo gdk-pixbuf-util.lo gdk-pixdata.lo gdk-pixbuf-enum-types.lo pixops/libpixops.la  -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lglib-2.0 -lm
| i586-angstrom-linux-libtool: link: rm
-fr  .libs/libgdk_pixbuf-2.0.exp .libs/libgdk_pixbuf-2.0.ver
| i586-angstrom-linux-libtool:
link: /home/paolo/oe/stuff/build/tmp/cross/i586/bin/i586-angstrom-linux-nm -B  .libs/gdk-pixbuf.o .libs/gdk-pixbuf-animation.o .libs/gdk-pixbuf-data.o .libs/gdk-pixbuf-io.o .libs/gdk-pixbuf-loader.o .libs/gdk-pixbuf-scale.o .libs/gdk-pixbuf-simple-anim.o .libs/gdk-pixbuf-scaled-anim.o .libs/gdk-pixbuf-util.o .libs/gdk-pixdata.o .libs/gdk-pixbuf-enum-types.o   pixops/.libs/libpixops.a | sed -n -e 's/^.*[	 ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[	 ][	 ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\x01 \x02 \x02/p' | /bin/sed 's/.* //' | sort | uniq > .libs/libgdk_pixbuf-2.0.exp
| i586-angstrom-linux-libtool: link: /bin/grep -E -e "^[^_].*"
".libs/libgdk_pixbuf-2.0.exp" > ".libs/libgdk_pixbuf-2.0.expT"
| i586-angstrom-linux-libtool: link: mv -f
".libs/libgdk_pixbuf-2.0.expT" ".libs/libgdk_pixbuf-2.0.exp"
| i586-angstrom-linux-libtool: link: echo "{ global:"
> .libs/libgdk_pixbuf-2.0.ver
| i586-angstrom-linux-libtool: link:  cat .libs/libgdk_pixbuf-2.0.exp |
sed -e "s/\(.*\)/\x01;/" >> .libs/libgdk_pixbuf-2.0.ver
| i586-angstrom-linux-libtool: link:  echo "local: *; };"
>> .libs/libgdk_pixbuf-2.0.ver
| i586-angstrom-linux-libtool: link:  ccache i586-angstrom-linux-gcc
-march=pentium
-shared  .libs/gdk-pixbuf.o .libs/gdk-pixbuf-animation.o .libs/gdk-pixbuf-data.o .libs/gdk-pixbuf-io.o .libs/gdk-pixbuf-loader.o .libs/gdk-pixbuf-scale.o .libs/gdk-pixbuf-simple-anim.o .libs/gdk-pixbuf-scaled-anim.o .libs/gdk-pixbuf-util.o .libs/gdk-pixdata.o .libs/gdk-pixbuf-enum-types.o  -Wl,--whole-archive pixops/.libs/libpixops.a -Wl,--no-whole-archive  -Wl,-rpath -Wl,/home/paolo/oe/stuff/build/tmp/staging/i586-angstrom-linux/usr/lib -L/home/paolo/oe/stuff/build/tmp/staging/i586-angstrom-linux/usr/lib/.libs -L/home/paolo/oe/stuff/build/tmp/staging/i586-angstrom-linux/usr/lib /home/paolo/oe/stuff/build/tmp/staging/i586-angstrom-linux/usr/lib/libgio-2.0.so /home/paolo/oe/stuff/build/tmp/staging/i586-angstrom-linux/usr/lib/libgobject-2.0.so /home/paolo/oe/stuff/build/tmp/staging/i586-angstrom-linux/usr/lib/libgmodule-2.0.so -ldl /home/paolo/oe/stuff/build/tmp/staging/i586-angstrom-linux/usr/lib/libglib-2.0.so -lm  -march=pentium -Wl,-rpath-link -Wl,/home/paolo/oe/stuff/build/tmp/staging/i586-angstrom-linux/usr/lib -Wl,-O1 -Wl,--hash-style=gnu   -Wl,-soname -Wl,libgdk_pixbuf-2.0.so.0 -Wl,-version-script -Wl,.libs/libgdk_pixbuf-2.0.ver -o .libs/libgdk_pixbuf-2.0.so.0.1400.2
| /home/paolo/oe/stuff/build/tmp/cross/i586/lib/gcc/i586-angstrom-linux/4.2.4/../../../../i586-angstrom-linux/bin/ld:.libs/libgdk_pixbuf-2.0.ver:2: ignoring invalid character `\001' in script
| /home/paolo/oe/stuff/build/tmp/cross/i586/lib/gcc/i586-angstrom-linux/4.2.4/../../../../i586-angstrom-linux/bin/ld:.libs/libgdk_pixbuf-2.0.ver:2: syntax error in VERSION script
| collect2: ld returned 1 exit status
| make[4]: *** [libgdk_pixbuf-2.0.la] Error 1
| make[4]: Leaving directory
`/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/gtk+-2.14.2/gdk-pixbuf'
| make[3]: *** [all-recursive] Error 1
| make[3]: Leaving directory
`/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/gtk+-2.14.2/gdk-pixbuf'
| make[2]: *** [all] Error 2
| make[2]: Leaving directory
`/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/gtk+-2.14.2/gdk-pixbuf'
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory
`/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/gtk+-2.14.2'
| make: *** [all] Error 2
| FATAL: oe_runmake failed
NOTE: Task
failed: /home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
+-2.14.2-r1/temp/log.do_compile.15854
NOTE: package gtk+-2.14.2-r1: task do_compile: failed
ERROR: TaskFailed event exception, aborting
NOTE: package gtk+-2.14.2: failed
ERROR: Build of /home/paolo/oe/stuff/openembedded/packages/gtk+/gtk
+_2.14.2.bb do_compile failed
ERROR: Task 7 (/home/paolo/oe/stuff/openembedded/packages/gtk+/gtk
+_2.14.2.bb, do_compile) failed
NOTE: Tasks Summary: Attempted 1113 tasks of which 972 didn't need to be
rerun and 1 failed.
ERROR: '/home/paolo/oe/stuff/openembedded/packages/gtk+/gtk+_2.14.2.bb'
failed
NOTE: build 200902041611: completed


On mer, 2009-02-04 at 12:29 +0100, Koen Kooi wrote:
> On 04-02-09 10:27, Paolo Cremonese wrote:
> > Sorry, don't know...
> >
> > Now the image works !
> >
> > Then I try to build a gpe-image, but i get an error at the last step.
> 
> Don't use dash as /bin/sh, use bash and rebuild libtool-cross and gtk+
> 
> regards,
> 
> Koen
> 
> >
> > Thanks in advance,
> >
> > Paolo
> >
> >
> >
> > | /home/paolo/oe/stuff/build/tmp/cross/i586/lib/gcc/i586-angstrom-linux/4.2.4/../../../../i586-angstrom-linux/bin/ld:.libs/libgdk_pixbuf-2.0.ver:2: ignoring invalid character `\001' in script
> > | /home/paolo/oe/stuff/build/tmp/cross/i586/lib/gcc/i586-angstrom-linux/4.2.4/../../../../i586-angstrom-linux/bin/ld:.libs/libgdk_pixbuf-2.0.ver:2: syntax error in VERSION script
> > | collect2: ld returned 1 exit status
> > | make[4]: *** [libgdk_pixbuf-2.0.la] Error 1
> > | make[4]: Leaving directory
> > `/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
> > +-2.14.2-r1/gtk+-2.14.2/gdk-pixbuf'
> > | make[3]: *** [all-recursive] Error 1
> > | make[3]: Leaving directory
> > `/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
> > +-2.14.2-r1/gtk+-2.14.2/gdk-pixbuf'
> > | make[2]: *** [all] Error 2
> > | make[2]: Leaving directory
> > `/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
> > +-2.14.2-r1/gtk+-2.14.2/gdk-pixbuf'
> > | make[1]: *** [all-recursive] Error 1
> > | make[1]: Leaving directory
> > `/home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
> > +-2.14.2-r1/gtk+-2.14.2'
> > | make: *** [all] Error 2
> > | FATAL: oe_runmake failed
> > NOTE: Task
> > failed: /home/paolo/oe/stuff/build/tmp/work/i586-angstrom-linux/gtk
> > +-2.14.2-r1/temp/log.do_compile.22403
> > NOTE: package gtk+-2.14.2-r1: task do_compile: failed
> > ERROR: TaskFailed event exception, aborting
> > NOTE: package gtk+-2.14.2: failed
> > ERROR: Build of /home/paolo/oe/stuff/openembedded/packages/gtk+/gtk
> > +_2.14.2.bb do_compile failed
> > ERROR: Task 951 (/home/paolo/oe/stuff/openembedded/packages/gtk+/gtk
> > +_2.14.2.bb, do_compile) failed
> > NOTE: Tasks Summary: Attempted 1003 tasks of which 788 didn't need to be
> > rerun and 1 failed.
> > ERROR: '/home/paolo/oe/stuff/openembedded/packages/gtk+/gtk+_2.14.2.bb'
> > failed
> > NOTE: build 200902040809: completed
> >
> >
> >
> >
> >
> >
> > On lun, 2009-02-02 at 17:13 +0100, Marco Cavallini wrote:
> >> Paolo Cremonese ha scritto:
> >>> Fine, waiting for GRUB patch. (what is "hrw" ?)
> >>>
> >>> My target has not hard disk, only CF.
> >>> To run the image, do I need a RAMFS ?
> >>> And in this case, I have to add it to the GRUB "menu.lst" ?
> >> Paolo,
> >> hrw is Marcin Juszkiewicz, an OE developer and mantainer.
> >> GRUB patch was pushed this morning and is ready for use into git mainstream.
> >>
> >> Cordiali Saluti / Kindest Regards / mit freundlichen Grüssen
> >> --
> >> Marco Cavallini | KOAN sas | Bergamo - Italia
> >>   embedded and real-time software engineering
> >>     Atmel third party certified consultant
> >> Phone:+39-035-255.235 - Fax:+39-178-22.39.748
> >>        http://www.KoanSoftware.com
> >>
> >> _______________________________________________
> >> Openembedded-devel mailing list
> >> Openembedded-devel@lists.openembedded.org
> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
> >
> >
> > _______________________________________________
> > Openembedded-devel mailing list
> > Openembedded-devel@lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
> 
> 
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Re: Build problems

[Marcin Juszkiewicz]

On Wednesday 04 of February 2009 16:48:53 Paolo Cremonese wrote:
> OK, changed DASH to BASH.
> Compiled libtool-cross OK.
>
> compiling gtk+ (bitbake gtk+), fails.

"bitbake -crebuild gtk+" is needed because gtk+ configure was done with 
dash.

Regards, 
-- 
JID:      hrw@jabber.org
Website:  http://marcin.juszkiewicz.com.pl/
LinkedIn: http://www.linkedin.com/in/marcinjuszkiewicz

Build problems

[Ananth, Rajesh]

[-- Attachment #1: Type: text/plain, Size: 3969 bytes --]

Hi,


I am new to the OpenBmc development, and as a first step I am trying to build the "bitbake obmc-phosphor-image" for the s2600wf platform. I have followed the instructions as per the OpenBmc git page.



I could see that the build is not validated for Ubuntu-24.04 and it fails with some network related errors. I don't have any firewall restrictions. For a starter like me, what would be the ideal base Kernel/distribution to get started with?




My build environment is:
====================
Linux bld-ub24s-openbmc 6.8.0-31-generic #31-Ubuntu SMP PREEMPT_DYNAMIC Sat Apr 20 00:40:06 UTC 2024 x86_64 x86_64 x86_64 GNU/Linux



Output from the bitbake:

=======================
WARNING: Host distribution "ubuntu-24.04" has not been validated with this version of the build system; you may possibly experience unexpected failures. It is recommended that you use a tested distribution.
Loading cache: 100% |########################################################################################################| Time: 0:00:02
Loaded 4747 entries from dependency cache.
Parsing recipes: 100% |######################################################################################################| Time: 0:00:00
Parsing of 2864 .bb files complete (2863 cached, 1 parsed). 4748 targets, 673 skipped, 0 masked, 0 errors.
WARNING: No bb files in default matched BBFILE_PATTERN_s2600wf ''
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION           = "2.9.0"
BUILD_SYS            = "x86_64-linux"
NATIVELSBSTRING      = "ubuntu-24.04"
TARGET_SYS           = "arm-openbmc-linux-gnueabi"
MACHINE              = "s2600wf"
DISTRO               = "openbmc-phosphor"
DISTRO_VERSION       = "nodistro.0"
TUNE_FEATURES        = "arm thumb arm1176jzs"
TARGET_FPU           = "soft"
meta
meta-oe
meta-networking
meta-python
meta-phosphor
meta-aspeed
meta-intel-openbmc
meta-s2600wf         = "master:ecb9886523248ce726b2a452d12a48234d126fc5"

Sstate summary: Wanted 2809 Local 0 Mirrors 0 Missed 2809 Current 2 (0% match, 0% complete)#######################           | ETA:  0:00:00
Initialising tasks: 100% |###################################################################################################| Time: 0:00:04
NOTE: Executing Tasks
ERROR: PermissionError: [Errno 1] Operation not permitted

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/rajesh/openbmc/poky/bitbake/bin/bitbake-worker", line 278, in child
    bb.utils.disable_network(uid, gid)
  File "/home/rajesh/openbmc/poky/bitbake/lib/bb/utils.py", line 1696, in disable_network
    with open("/proc/self/uid_map", "w") as f:
PermissionError: [Errno 1] Operation not permitted

ERROR: PermissionError: [Errno 1] Operation not permitted

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/rajesh/openbmc/poky/bitbake/bin/bitbake-worker", line 278, in child
    bb.utils.disable_network(uid, gid)
  File "/home/rajesh/openbmc/poky/bitbake/lib/bb/utils.py", line 1696, in disable_network
    with open("/proc/self/uid_map", "w") as f:
PermissionError: [Errno 1] Operation not permitted

ERROR: Task (/home/rajesh/openbmc/meta/recipes-devtools/quilt/quilt-native_0.67.bb:do_prepare_recipe_sysroot) failed with exit code '1'
ERROR: Task (/home/rajesh/openbmc/meta/recipes-devtools/quilt/quilt-native_0.67.bb:do_unpack) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5 tasks of which 3 didn't need to be rerun and 2 failed.

Summary: 2 tasks failed:
  /home/rajesh/openbmc/meta/recipes-devtools/quilt/quilt-native_0.67.bb:do_prepare_recipe_sysroot
  /home/rajesh/openbmc/meta/recipes-devtools/quilt/quilt-native_0.67.bb:do_unpack
Summary: There were 2 WARNING messages.
Summary: There were 2 ERROR messages, returning a non-zero exit code.





[-- Attachment #2: Type: text/html, Size: 18015 bytes --]

Re: Build problems

[Patrick Williams]

[-- Attachment #1: Type: text/plain, Size: 934 bytes --]

On Mon, Jun 03, 2024 at 11:34:52PM +0000, Ananth, Rajesh wrote:
> WARNING: Host distribution "ubuntu-24.04" has not been validated with this version of the build system; you may possibly experience unexpected failures. It is recommended that you use a tested distribution.

> Traceback (most recent call last):
>   File "/home/rajesh/openbmc/poky/bitbake/bin/bitbake-worker", line 278, in child
>     bb.utils.disable_network(uid, gid)
>   File "/home/rajesh/openbmc/poky/bitbake/lib/bb/utils.py", line 1696, in disable_network
>     with open("/proc/self/uid_map", "w") as f:
> PermissionError: [Errno 1] Operation not permitted
> 
> ERROR: PermissionError: [Errno 1] Operation not permitted

This is a compatibility problem between bitbake and Ubuntu 24.04 which is
not yet resolved.  They are discussing this upstream already.

https://lists.yoctoproject.org/g/docs/topic/106220010#msg5234

-- 
Patrick Williams

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]