hard freezes with hdsp with cardbus/pci adapter card

hard freezes with hdsp with cardbus/pci adapter card

[Tim Blechmann]

[-- Attachment #1.1: Type: text/plain, Size: 2285 bytes --]

hi all,

i have some issues with playback on one of my machines with different
kernels, having my rme hammerfall hdsp connected via a cardbus/pci
adapter card.

after some time (between a few seconds and several minutes) of flawless
playback, the system completely freezes, magic sysrq keys are not
functional either ... the freeze occurs with rt and non-rt kernels,
with jack running with and without realtime scheduling.

i have the suspicion, that it is related to the combination of the hdsp
with the cardbus controller of the adapter card ...

the interesting part of lspci is:
06:01.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller
(rev 01)
	Subsystem: ENE Technology Inc CB1410 Cardbus Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fb600000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
	Memory window 0: c4000000-c7fff000 (prefetchable)
	Memory window 1: c8000000-cbfff000
	I/O window 0: 0000e000-0000e0ff
	I/O window 1: 0000e400-0000e4ff
	BridgeCtl: Parity+ SERR+ ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket

07:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall
DSP (rev 0f)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 255
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=64K]
	Kernel driver in use: RME Hammerfall DSP
	Kernel modules: snd-hdsp

the irq 17 is used by these two devices only. i am not sure, how to
proceed debugging this, since i cannot get any useful debugging
information ...

thnx, tim

-- 
tim@klingt.org
http://tim.klingt.org

A paranoid is a man who knows a little of what's going on.
  William S. Burroughs


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: hard freezes with hdsp with cardbus/pci adapter card

[Florian Faber]

Tim,

> i have the suspicion, that it is related to the combination of the hdsp
> with the cardbus controller of the adapter card ...

Yes. Seen it several times. Get the PCI interface is the only advice I
can give.


Flo
-- 
Machines can do the work, so people have time to think.
public key DA43FEF4          x-hkp://wwwkeys.eu.pgp.net

Re: hard freezes with hdsp with cardbus/pci adapter card

[Wolfram Sang]

[-- Attachment #1.1: Type: text/plain, Size: 313 bytes --]

> i have the suspicion, that it is related to the combination of the hdsp
> with the cardbus controller of the adapter card ...

Full bootlog please.

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: hard freezes with hdsp with cardbus/pci adapter card

[Tim Blechmann]

[-- Attachment #1.1.1: Type: text/plain, Size: 327 bytes --]

On 08/11/2009 07:06 AM, Wolfram Sang wrote:
>> i have the suspicion, that it is related to the combination of the hdsp
>> with the cardbus controller of the adapter card ...
> 
> Full bootlog please.

attached

-- 
tim@klingt.org
http://tim.klingt.org

You can play a shoestring if you're sincere
  John Coltrane

[-- Attachment #1.1.2: bootlog --]
[-- Type: text/plain, Size: 57463 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.30.4 (tim@moka) (gcc version 4.4.1 (Ubuntu 4.4.1-1ubuntu1~jaunty1) ) #4 SMP PREEMPT Mon Aug 10 17:55:02 CEST 2009
[    0.000000] Command line: root=UUID=f4e801b1-b54a-4002-a3e3-328308ad48fb ro quiet splash vga=769 
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf680000 (usable)
[    0.000000]  BIOS-e820: 00000000bf680000 - 00000000bf698000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf6dc000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[    0.000000] DMI 2.5 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x340000 max_arch_pfn = 0x100000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E3FFF write-protect
[    0.000000]   E4000-EBFFF write-through
[    0.000000]   EC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask F00000000 write-back
[    0.000000]   2 base 300000000 mask FC0000000 write-back
[    0.000000]   3 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   4 base 0BF700000 mask FFFF00000 uncachable
[    0.000000]   5 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbf680 max_arch_pfn = 0x100000000
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e4c00 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000bf680000 (usable)
[    0.000000]  modified: 00000000bf680000 - 00000000bf698000 (ACPI data)
[    0.000000]  modified: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS)
[    0.000000]  modified: 00000000bf6dc000 - 00000000c0000000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  modified: 0000000100000000 - 0000000340000000 (usable)
[    0.000000] init_memory_mapping: 0000000000000000-00000000bf680000
[    0.000000]  0000000000 - 00bf600000 page 2M
[    0.000000]  00bf600000 - 00bf680000 page 4k
[    0.000000] kernel direct mapping tables up to bf680000 @ 10000-15000
[    0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[    0.000000]  0100000000 - 0340000000 page 2M
[    0.000000] kernel direct mapping tables up to 340000000 @ 13000-21000
[    0.000000] RAMDISK: 37857000 - 37fef11d
[    0.000000] ACPI: RSDP 00000000000fabd0 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 00000000bf680100 0005C (v01 022609 XSDT1156 20090226 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000bf680290 000F4 (v03 022609 FACP1156 20090226 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000bf6804b0 0C3DD (v01  A1146 A1146001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 00000000bf698000 00040
[    0.000000] ACPI: APIC 00000000bf680390 000D8 (v01 022609 APIC1156 20090226 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000bf680470 0003C (v01 022609 OEMMCFG  20090226 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000bf698040 00072 (v01 022609 OEMB1156 20090226 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bf68f4b0 00038 (v01 022609 OEMHPET  20090226 MSFT 00000097)
[    0.000000] ACPI: OSFR 00000000bf68f4f0 000B0 (v01 022609 OEMOSFR  20090226 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000bf69a8f0 0249F (v01 DpgPmm    CpuPm 00000012 INTL 20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0340000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0000200000 - 0001304b7c]    TEXT DATA BSS ==> [0000200000 - 0001304b7c]
[    0.000000]   #3 [0037857000 - 0037fef11d]          RAMDISK ==> [0037857000 - 0037fef11d]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [0001305000 - 0001305288]              BRK ==> [0001305000 - 0001305288]
[    0.000000]   #6 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
[    0.000000]   #7 [0000013000 - 000001c000]          PGTABLE ==> [0000013000 - 000001c000]
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000]  [ffffe20000000000-ffffe2000f5fffff] PMD -> [ffff880028200000-ffff8800377fffff] on node 0
[    0.000000]  [ffffe2000f600000-ffffe20011dfffff] PMD -> [ffff880038000000-ffff88003a7fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00340000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000bf680
[    0.000000]     0: 0x00100000 -> 0x00340000
[    0.000000] On node 0 totalpages: 3143183
[    0.000000]   DMA zone: 88 pages used for memmap
[    0.000000]   DMA zone: 111 pages reserved
[    0.000000]   DMA zone: 3784 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 22440 pages used for memmap
[    0.000000]   DMA32 zone: 757464 pages, LIFO batch:31
[    0.000000]   Normal zone: 50688 pages used for memmap
[    0.000000]   Normal zone: 2308608 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec8a000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] 16 Processors exceeds NR_CPUS limit of 8
[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 48
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
[    0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bf680000 - 00000000bf698000
[    0.000000] PM: Registered nosave memory: 00000000bf698000 - 00000000bf6dc000
[    0.000000] PM: Registered nosave memory: 00000000bf6dc000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[    0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000)
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages at ffff880028105000, static data 83332 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 3069856
[    0.000000] Kernel command line: root=UUID=f4e801b1-b54a-4002-a3e3-328308ad48fb ro quiet splash vga=769 
[    0.000000] Initializing CPU#0
[    0.000000] Preemptible RCU implementation.
[    0.000000] NR_IRQS:512
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Extended CMOS year: 2000
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2672.657 MHz processor.
[   32.396589] Console: colour dummy device 80x25
[   32.396602] console [tty0] enabled
[   32.396624] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[   32.396626] ... MAX_LOCKDEP_SUBCLASSES:  8
[   32.396627] ... MAX_LOCK_DEPTH:          48
[   32.396628] ... MAX_LOCKDEP_KEYS:        8191
[   32.396629] ... CLASSHASH_SIZE:          4096
[   32.396631] ... MAX_LOCKDEP_ENTRIES:     16384
[   32.396632] ... MAX_LOCKDEP_CHAINS:      32768
[   32.396633] ... CHAINHASH_SIZE:          16384
[   32.396634]  memory used by lock dependency info: 5695 kB
[   32.396635]  per task-struct memory footprint: 1920 bytes
[   32.398237] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[   32.401458] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[   32.430953] allocated 136314880 bytes of page_cgroup
[   32.430956] please try cgroup_disable=memory option if you don't want
[   32.431180] Checking aperture...
[   32.436782] No AGP bridge found
[   32.436818] Calgary: detecting Calgary via BIOS EBDA area
[   32.436820] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[   32.436822] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[   32.443191] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[   32.443194] software IO TLB at phys 0x20000000 - 0x24000000
[   32.525374] Memory: 12028536k/13631488k available (4975k kernel code, 1058756k absent, 543268k reserved, 2539k data, 504k init)
[   32.525867] hpet clockevent registered
[   32.525870] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[   32.525882] Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.31 BogoMIPS (lpj=2672657)
[   32.526002] Security Framework initialized
[   32.526006] SELinux:  Disabled at boot.
[   32.526060] Mount-cache hash table entries: 256
[   32.526953] Initializing cgroup subsys ns
[   32.526956] Initializing cgroup subsys cpuacct
[   32.526962] Initializing cgroup subsys memory
[   32.526997] Initializing cgroup subsys freezer
[   32.527015] CPU: Physical Processor ID: 0
[   32.527016] CPU: Processor Core ID: 0
[   32.527019] CPU: L1 I cache: 32K, L1 D cache: 32K
[   32.527021] CPU: L2 cache: 256K
[   32.527022] CPU: L3 cache: 8192K
[   32.527025] using mwait in idle threads.
[   32.527027] ... installed Nehalem/Corei7 event tables
[   32.527028] Intel Performance Monitoring support detected.
[   32.527030] ... version:         3
[   32.527031] ... bit width:       48
[   32.527032] ... num counters:    4
[   32.527033] ... value mask:      0000ffffffffffff
[   32.527034] ... max period:      000000007fffffff
[   32.527035] ... fixed counters:  3
[   32.527036] ... counter mask:    000000070000000f
[   32.527816] ACPI: Core revision 20090320
[   32.566868] Setting APIC routing to flat
[   32.567355] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[   32.577354] CPU0: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
[   32.680378] lockdep: fixing up alternatives.
[   32.680474] Booting processor 1 APIC 0x2 ip 0x6000
[   32.690735] Initializing CPU#1
[   32.751494] Calibrating delay using timer specific routine.. 5397.79 BogoMIPS (lpj=2698899)
[   32.751500] CPU: Physical Processor ID: 0
[   32.751501] CPU: Processor Core ID: 1
[   32.751503] CPU: L1 I cache: 32K, L1 D cache: 32K
[   32.751505] CPU: L2 cache: 256K
[   32.751506] CPU: L3 cache: 8192K
[   32.751998] CPU1: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
[   32.752017] Skipping synchronization checks as TSC is reliable.
[   32.752246] lockdep: fixing up alternatives.
[   32.752265] Booting processor 2 APIC 0x4 ip 0x6000
[   32.762624] Initializing CPU#2
[   32.823165] Calibrating delay using timer specific routine.. 5397.79 BogoMIPS (lpj=2698897)
[   32.823171] CPU: Physical Processor ID: 0
[   32.823172] CPU: Processor Core ID: 2
[   32.823174] CPU: L1 I cache: 32K, L1 D cache: 32K
[   32.823175] CPU: L2 cache: 256K
[   32.823176] CPU: L3 cache: 8192K
[   32.823587] CPU2: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
[   32.823606] Skipping synchronization checks as TSC is reliable.
[   32.823821] lockdep: fixing up alternatives.
[   32.823842] Booting processor 3 APIC 0x6 ip 0x6000
[   32.834200] Initializing CPU#3
[   32.895846] Calibrating delay using timer specific routine.. 5505.75 BogoMIPS (lpj=2752878)
[   32.895855] CPU: Physical Processor ID: 0
[   32.895856] CPU: Processor Core ID: 3
[   32.895858] CPU: L1 I cache: 32K, L1 D cache: 32K
[   32.895859] CPU: L2 cache: 256K
[   32.895860] CPU: L3 cache: 8192K
[   32.896267] CPU3: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
[   32.896286] Skipping synchronization checks as TSC is reliable.
[   32.896506] lockdep: fixing up alternatives.
[   32.896526] Booting processor 4 APIC 0x1 ip 0x6000
[   32.906884] Initializing CPU#4
[   32.967515] Calibrating delay using timer specific routine.. 5397.80 BogoMIPS (lpj=2698901)
[   32.967524] CPU: Physical Processor ID: 0
[   32.967525] CPU: Processor Core ID: 0
[   32.967528] CPU: L1 I cache: 32K, L1 D cache: 32K
[   32.967530] CPU: L2 cache: 256K
[   32.967532] CPU: L3 cache: 8192K
[   32.968046] CPU4: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
[   32.968065] Skipping synchronization checks as TSC is reliable.
[   32.968284] lockdep: fixing up alternatives.
[   32.968304] Booting processor 5 APIC 0x3 ip 0x6000
[   32.978661] Initializing CPU#5
[   33.039186] Calibrating delay using timer specific routine.. 5397.80 BogoMIPS (lpj=2698900)
[   33.039192] CPU: Physical Processor ID: 0
[   33.039193] CPU: Processor Core ID: 1
[   33.039195] CPU: L1 I cache: 32K, L1 D cache: 32K
[   33.039197] CPU: L2 cache: 256K
[   33.039198] CPU: L3 cache: 8192K
[   33.039726] CPU5: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
[   33.039744] Skipping synchronization checks as TSC is reliable.
[   33.039961] lockdep: fixing up alternatives.
[   33.039982] Booting processor 6 APIC 0x5 ip 0x6000
[   33.050340] Initializing CPU#6
[   33.110856] Calibrating delay using timer specific routine.. 5397.79 BogoMIPS (lpj=2698899)
[   33.110862] CPU: Physical Processor ID: 0
[   33.110863] CPU: Processor Core ID: 2
[   33.110865] CPU: L1 I cache: 32K, L1 D cache: 32K
[   33.110867] CPU: L2 cache: 256K
[   33.110868] CPU: L3 cache: 8192K
[   33.111406] CPU6: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
[   33.111425] Skipping synchronization checks as TSC is reliable.
[   33.111635] lockdep: fixing up alternatives.
[   33.111670] Booting processor 7 APIC 0x7 ip 0x6000
[   33.122027] Initializing CPU#7
[   33.183538] Calibrating delay using timer specific routine.. 5505.75 BogoMIPS (lpj=2752876)
[   33.183545] CPU: Physical Processor ID: 0
[   33.183546] CPU: Processor Core ID: 3
[   33.183548] CPU: L1 I cache: 32K, L1 D cache: 32K
[   33.183550] CPU: L2 cache: 256K
[   33.183551] CPU: L3 cache: 8192K
[   33.184095] CPU7: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
[   33.184113] Skipping synchronization checks as TSC is reliable.
[   33.184133] Brought up 8 CPUs
[   33.184135] Total of 8 processors activated (43345.81 BogoMIPS).
[   33.184263] CPU0 attaching sched-domain:
[   33.184266]  domain 0: span 0,4 level SIBLING
[   33.184268]   groups: 0 4
[   33.184271]   domain 1: span 0-7 level MC
[   33.184273]    groups: 0,4 1,5 2,6 3,7
[   33.184292] CPU1 attaching sched-domain:
[   33.184294]  domain 0: span 1,5 level SIBLING
[   33.184296]   groups: 1 5
[   33.184299]   domain 1: span 0-7 level MC
[   33.184301]    groups: 1,5 2,6 3,7 0,4
[   33.184307] CPU2 attaching sched-domain:
[   33.184308]  domain 0: span 2,6 level SIBLING
[   33.184310]   groups: 2 6
[   33.184313]   domain 1: span 0-7 level MC
[   33.184315]    groups: 2,6 3,7 0,4 1,5
[   33.184321] CPU3 attaching sched-domain:
[   33.184322]  domain 0: span 3,7 level SIBLING
[   33.184324]   groups: 3 7
[   33.184327]   domain 1: span 0-7 level MC
[   33.184329]    groups: 3,7 0,4 1,5 2,6
[   33.184335] CPU4 attaching sched-domain:
[   33.184336]  domain 0: span 0,4 level SIBLING
[   33.184338]   groups: 4 0
[   33.184341]   domain 1: span 0-7 level MC
[   33.184343]    groups: 0,4 1,5 2,6 3,7
[   33.184349] CPU5 attaching sched-domain:
[   33.184350]  domain 0: span 1,5 level SIBLING
[   33.184352]   groups: 5 1
[   33.184355]   domain 1: span 0-7 level MC
[   33.184357]    groups: 1,5 2,6 3,7 0,4
[   33.184363] CPU6 attaching sched-domain:
[   33.184364]  domain 0: span 2,6 level SIBLING
[   33.184366]   groups: 6 2
[   33.184369]   domain 1: span 0-7 level MC
[   33.184371]    groups: 2,6 3,7 0,4 1,5
[   33.184377] CPU7 attaching sched-domain:
[   33.184378]  domain 0: span 3,7 level SIBLING
[   33.184380]   groups: 7 3
[   33.184383]   domain 1: span 0-7 level MC
[   33.184385]    groups: 3,7 0,4 1,5 2,6
[   33.185179] net_namespace: 2152 bytes
[   33.185235] Booting paravirtualized kernel on bare hardware
[   33.185490] regulator: core version 0.5
[   33.185517] Time:  5:38:21  Date: 08/11/09
[   33.185713] NET: Registered protocol family 16
[   33.186191] ACPI: bus type pci registered
[   33.186313] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[   33.186315] PCI: Not using MMCONFIG.
[   33.186317] PCI: Using configuration type 1 for base access
[   33.187791] bio: create slab <bio-0> at 0
[   33.191136] ACPI: EC: Look up EC in DSDT
[   33.232914] ACPI: Interpreter enabled
[   33.232918] ACPI: (supports S0 S1 S3 S4 S5)
[   33.232971] ACPI: Using IOAPIC for interrupt routing
[   33.233047] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[   33.236356] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[   33.237902] PCI: Using MMCONFIG at e0000000 - efffffff
[   33.252278] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 8B, should be 83 [20090320]
[   33.252595] ACPI: No dock devices found.
[   33.252691] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   33.252924] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[   33.252928] pci 0000:00:00.0: PME# disabled
[   33.253005] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[   33.253008] pci 0000:00:01.0: PME# disabled
[   33.253087] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[   33.253090] pci 0000:00:03.0: PME# disabled
[   33.253171] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[   33.253174] pci 0000:00:07.0: PME# disabled
[   33.253628] pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f]
[   33.253716] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f]
[   33.253804] pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f]
[   33.253895] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf7fff000-0xf7fff3ff]
[   33.253960] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[   33.253965] pci 0000:00:1a.7: PME# disabled
[   33.254016] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7ff8000-0xf7ffbfff]
[   33.254067] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[   33.254071] pci 0000:00:1b.0: PME# disabled
[   33.254142] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[   33.254146] pci 0000:00:1c.0: PME# disabled
[   33.254225] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[   33.254229] pci 0000:00:1c.2: PME# disabled
[   33.254301] pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f]
[   33.254388] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
[   33.254473] pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f]
[   33.254565] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7ffe000-0xf7ffe3ff]
[   33.254631] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[   33.254635] pci 0000:00:1d.7: PME# disabled
[   33.254786] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[   33.254790] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[   33.254793] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[   33.254798] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[   33.254863] pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007]
[   33.254869] pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03]
[   33.254875] pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887]
[   33.254881] pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803]
[   33.254888] pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f]
[   33.254894] pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f]
[   33.254953] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7ffd000-0xf7ffd0ff]
[   33.254969] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[   33.255023] pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007]
[   33.255030] pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03]
[   33.255036] pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887]
[   33.255042] pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803]
[   33.255048] pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f]
[   33.255054] pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f]
[   33.255191] pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[   33.255202] pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[   33.255216] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[   33.255222] pci 0000:02:00.0: reg 24 io port: [0xcc00-0xcc7f]
[   33.255228] pci 0000:02:00.0: reg 30 32bit mmio: [0xfb480000-0xfb4fffff]
[   33.255315] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff]
[   33.255319] pci 0000:00:03.0: bridge 32bit mmio: [0xf8000000-0xfb4fffff]
[   33.255325] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[   33.255457] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf4f00000-0xf4ffffff]
[   33.255512] pci 0000:04:00.0: reg 10 io port: [0xd800-0xd8ff]
[   33.255534] pci 0000:04:00.0: reg 18 64bit mmio: [0xfb5ff000-0xfb5fffff]
[   33.255550] pci 0000:04:00.0: reg 20 64bit mmio: [0xf4ef0000-0xf4efffff]
[   33.255559] pci 0000:04:00.0: reg 30 32bit mmio: [0xfb5c0000-0xfb5dffff]
[   33.255605] pci 0000:04:00.0: supports D1 D2
[   33.255606] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[   33.255611] pci 0000:04:00.0: PME# disabled
[   33.255694] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
[   33.255698] pci 0000:00:1c.2: bridge 32bit mmio: [0xfb500000-0xfb5fffff]
[   33.255705] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4e00000-0xf4efffff]
[   33.255751] pci 0000:06:00.0: reg 10 32bit mmio: [0xfb6f8000-0xfb6fffff]
[   33.255847] pci 0000:06:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[   33.255870] pci 0000:06:01.0: supports D1 D2
[   33.255871] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[   33.255876] pci 0000:06:01.0: PME# disabled
[   33.255945] pci 0000:00:1e.0: transparent bridge
[   33.255949] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[   33.255953] pci 0000:00:1e.0: bridge 32bit mmio: [0xfb600000-0xfbefffff]
[   33.255960] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf5000000-0xf6ffffff]
[   33.256014] pci_bus 0000:00: on NUMA node 0
[   33.256022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   33.256486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   33.256627] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[   33.256708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[   33.256797] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[   33.256874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[   33.256950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[   33.296439] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[   33.296611] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[   33.296774] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
[   33.296938] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[   33.297102] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[   33.297269] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[   33.297433] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[   33.297597] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[   33.297934] SCSI subsystem initialized
[   33.298187] libata version 3.00 loaded.
[   33.298290] usbcore: registered new interface driver usbfs
[   33.298312] usbcore: registered new interface driver hub
[   33.298351] usbcore: registered new device driver usb
[   33.298556] ACPI: WMI: Mapper loaded
[   33.298557] PCI: Using ACPI for IRQ routing
[   33.307766] Bluetooth: Core ver 2.15
[   33.307830] NET: Registered protocol family 31
[   33.307831] Bluetooth: HCI device and connection manager initialized
[   33.307851] Bluetooth: HCI socket layer initialized
[   33.307853] NET: Registered protocol family 8
[   33.307855] NET: Registered protocol family 20
[   33.307873] NetLabel: Initializing
[   33.307875] NetLabel:  domain hash size = 128
[   33.307876] NetLabel:  protocols = UNLABELED CIPSOv4
[   33.307919] NetLabel:  unlabeled traffic allowed by default
[   33.307988] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[   33.307993] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[   33.316859] Switched to high resolution mode on CPU 0
[   33.317292] Switched to high resolution mode on CPU 2
[   33.317297] Switched to high resolution mode on CPU 3
[   33.317306] Switched to high resolution mode on CPU 1
[   33.317375] Switched to high resolution mode on CPU 6
[   33.317377] Switched to high resolution mode on CPU 5
[   33.317379] Switched to high resolution mode on CPU 4
[   33.317382] Switched to high resolution mode on CPU 7
[   33.328881] pnp: PnP ACPI init
[   33.328920] ACPI: bus type pnp registered
[   33.333170] pnp: PnP ACPI: found 15 devices
[   33.333173] ACPI: ACPI bus type pnp unregistered
[   33.333186] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
[   33.333188] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[   33.333190] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
[   33.333193] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[   33.333195] system 00:01: iomem range 0xfec8a000-0xfec8afff could not be reserved
[   33.333198] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
[   33.333208] system 00:07: ioport range 0x290-0x29f has been reserved
[   33.333216] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[   33.333218] system 00:08: ioport range 0x800-0x87f has been reserved
[   33.333221] system 00:08: ioport range 0x500-0x57f could not be reserved
[   33.333223] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[   33.333226] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[   33.333228] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
[   33.333237] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved
[   33.333245] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[   33.333247] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[   33.333254] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[   33.333262] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[   33.333264] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[   33.333267] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[   33.333269] system 00:0e: iomem range 0x100000-0xbfefffff could not be reserved
[   33.333272] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved
[   33.338093] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[   33.338095] pci 0000:00:01.0:   IO window: disabled
[   33.338099] pci 0000:00:01.0:   MEM window: disabled
[   33.338103] pci 0000:00:01.0:   PREFETCH window: disabled
[   33.338111] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[   33.338113] pci 0000:00:03.0:   IO window: 0xc000-0xcfff
[   33.338118] pci 0000:00:03.0:   MEM window: 0xf8000000-0xfb4fffff
[   33.338122] pci 0000:00:03.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[   33.338128] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[   33.338129] pci 0000:00:07.0:   IO window: disabled
[   33.338134] pci 0000:00:07.0:   MEM window: disabled
[   33.338137] pci 0000:00:07.0:   PREFETCH window: disabled
[   33.338143] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[   33.338144] pci 0000:00:1c.0:   IO window: disabled
[   33.338149] pci 0000:00:1c.0:   MEM window: disabled
[   33.338152] pci 0000:00:1c.0:   PREFETCH window: 0x000000f4f00000-0x000000f4ffffff
[   33.338159] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[   33.338162] pci 0000:00:1c.2:   IO window: 0xd000-0xdfff
[   33.338167] pci 0000:00:1c.2:   MEM window: 0xfb500000-0xfb5fffff
[   33.338171] pci 0000:00:1c.2:   PREFETCH window: 0x000000f4e00000-0x000000f4efffff
[   33.338185] pci 0000:06:01.0: CardBus bridge, secondary bus 0000:07
[   33.338187] pci 0000:06:01.0:   IO window: 0x00e000-0x00e0ff
[   33.338191] pci 0000:06:01.0:   IO window: 0x00e400-0x00e4ff
[   33.338196] pci 0000:06:01.0:   PREFETCH window: 0xc4000000-0xc7ffffff
[   33.338200] pci 0000:06:01.0:   MEM window: 0xc8000000-0xcbffffff
[   33.338205] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[   33.338208] pci 0000:00:1e.0:   IO window: 0xe000-0xefff
[   33.338213] pci 0000:00:1e.0:   MEM window: 0xfb600000-0xfbefffff
[   33.338217] pci 0000:00:1e.0:   PREFETCH window: 0x000000f5000000-0x000000f6ffffff
[   33.338231] pci 0000:00:01.0: setting latency timer to 64
[   33.338239] pci 0000:00:03.0: setting latency timer to 64
[   33.338247] pci 0000:00:07.0: setting latency timer to 64
[   33.338259] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   33.338263] pci 0000:00:1c.0: setting latency timer to 64
[   33.338272] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   33.338276] pci 0000:00:1c.2: setting latency timer to 64
[   33.338283] pci 0000:00:1e.0: setting latency timer to 64
[   33.338291] pci 0000:06:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   33.338297] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[   33.338299] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[   33.338301] pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
[   33.338302] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfb4fffff]
[   33.338304] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[   33.338306] pci_bus 0000:05: resource 2 pref mem [0xf4f00000-0xf4ffffff]
[   33.338308] pci_bus 0000:04: resource 0 io:  [0xd000-0xdfff]
[   33.338310] pci_bus 0000:04: resource 1 mem: [0xfb500000-0xfb5fffff]
[   33.338311] pci_bus 0000:04: resource 2 pref mem [0xf4e00000-0xf4efffff]
[   33.338313] pci_bus 0000:06: resource 0 io:  [0xe000-0xefff]
[   33.338315] pci_bus 0000:06: resource 1 mem: [0xfb600000-0xfbefffff]
[   33.338316] pci_bus 0000:06: resource 2 pref mem [0xf5000000-0xf6ffffff]
[   33.338318] pci_bus 0000:06: resource 3 io:  [0x00-0xffff]
[   33.338320] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]
[   33.338322] pci_bus 0000:07: resource 0 io:  [0xe000-0xe0ff]
[   33.338323] pci_bus 0000:07: resource 1 io:  [0xe400-0xe4ff]
[   33.338325] pci_bus 0000:07: resource 2 pref mem [0xc4000000-0xc7ffffff]
[   33.338327] pci_bus 0000:07: resource 3 mem: [0xc8000000-0xcbffffff]
[   33.338453] NET: Registered protocol family 2
[   33.374055] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[   33.375111] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[   33.375740] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[   33.380156] TCP: Hash tables configured (established 262144 bind 65536)
[   33.380179] TCP reno registered
[   33.392073] NET: Registered protocol family 1
[   33.392313] Trying to unpack rootfs image as initramfs...
[   33.536907] Freeing initrd memory: 7776k freed
[   33.538914] Scanning for low memory corruption every 60 seconds
[   33.539337] audit: initializing netlink socket (disabled)
[   33.539372] type=2000 audit(1249969100.871:1): initialized
[   33.543050] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[   33.543521] VFS: Disk quotas dquot_6.5.2
[   33.543601] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   33.544667] fuse init (API version 7.11)
[   33.544736] msgmni has been set to 23510
[   33.545447] alg: No test for stdrng (krng)
[   33.545486] io scheduler noop registered
[   33.545489] io scheduler anticipatory registered
[   33.545490] io scheduler deadline registered
[   33.545534] io scheduler cfq registered (default)
[   33.545699] pci 0000:02:00.0: Boot video device
[   33.545944] pcieport-driver 0000:00:01.0: irq 48 for MSI/MSI-X
[   33.545958] pcieport-driver 0000:00:01.0: setting latency timer to 64
[   33.546121] pcieport-driver 0000:00:03.0: irq 49 for MSI/MSI-X
[   33.546135] pcieport-driver 0000:00:03.0: setting latency timer to 64
[   33.546300] pcieport-driver 0000:00:07.0: irq 50 for MSI/MSI-X
[   33.546313] pcieport-driver 0000:00:07.0: setting latency timer to 64
[   33.546465] pcieport-driver 0000:00:1c.0: irq 51 for MSI/MSI-X
[   33.546480] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[   33.546638] pcieport-driver 0000:00:1c.2: irq 52 for MSI/MSI-X
[   33.546653] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[   33.546775] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[   33.546803] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[   33.546814] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[   33.546828] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   33.547113] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[   33.547382] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   33.547419] ACPI: Power Button [PWRF]
[   33.547508] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[   33.547511] ACPI: Power Button [PWRB]
[   33.548649] ACPI: SSDT 00000000bf6980c0 00403 (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
[   33.549638] ACPI: SSDT 00000000bf69a140 003B2 (v01  PmRef  P001Cst 00003001 INTL 20060113)
[   33.552725] Monitor-Mwait will be used to enter C-1 state
[   33.552775] Monitor-Mwait will be used to enter C-2 state
[   33.552810] Monitor-Mwait will be used to enter C-3 state
[   33.552949] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   33.553086] processor ACPI_CPU:00: registered as cooling_device0
[   33.553658] ACPI: SSDT 00000000bf6984d0 00403 (v01 DpgPmm  P002Ist 00000012 INTL 20060113)
[   33.554605] ACPI: SSDT 00000000bf69a500 00085 (v01  PmRef  P002Cst 00003000 INTL 20060113)
[   33.557740] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[   33.557783] processor ACPI_CPU:01: registered as cooling_device1
[   33.558366] ACPI: SSDT 00000000bf6988e0 00403 (v01 DpgPmm  P003Ist 00000012 INTL 20060113)
[   33.559315] ACPI: SSDT 00000000bf69a590 00085 (v01  PmRef  P003Cst 00003000 INTL 20060113)
[   33.562456] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
[   33.562492] processor ACPI_CPU:02: registered as cooling_device2
[   33.563078] ACPI: SSDT 00000000bf698cf0 00403 (v01 DpgPmm  P004Ist 00000012 INTL 20060113)
[   33.564030] ACPI: SSDT 00000000bf69a620 00085 (v01  PmRef  P004Cst 00003000 INTL 20060113)
[   33.567165] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
[   33.567201] processor ACPI_CPU:03: registered as cooling_device3
[   33.567782] ACPI: SSDT 00000000bf699100 00403 (v01 DpgPmm  P005Ist 00000012 INTL 20060113)
[   33.568730] ACPI: SSDT 00000000bf69a6b0 00085 (v01  PmRef  P005Cst 00003000 INTL 20060113)
[   33.571901] ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3])
[   33.571940] processor ACPI_CPU:04: registered as cooling_device4
[   33.572516] ACPI: SSDT 00000000bf699510 00403 (v01 DpgPmm  P006Ist 00000012 INTL 20060113)
[   33.573477] ACPI: SSDT 00000000bf69a740 00085 (v01  PmRef  P006Cst 00003000 INTL 20060113)
[   33.576630] ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3])
[   33.576666] processor ACPI_CPU:05: registered as cooling_device5
[   33.577256] ACPI: SSDT 00000000bf699920 00403 (v01 DpgPmm  P007Ist 00000012 INTL 20060113)
[   33.578220] ACPI: SSDT 00000000bf69a7d0 00085 (v01  PmRef  P007Cst 00003000 INTL 20060113)
[   33.581372] ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3])
[   33.581409] processor ACPI_CPU:06: registered as cooling_device6
[   33.581992] ACPI: SSDT 00000000bf699d30 00403 (v01 DpgPmm  P008Ist 00000012 INTL 20060113)
[   33.582957] ACPI: SSDT 00000000bf69a860 00085 (v01  PmRef  P008Cst 00003000 INTL 20060113)
[   33.586129] ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3])
[   33.586173] processor ACPI_CPU:07: registered as cooling_device7
[   33.590035] XENFS: not registering filesystem on non-xen platform
[   33.591793] Linux agpgart interface v0.103
[   33.591798] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   33.593808] brd: module loaded
[   33.594389] loop: module loaded
[   33.594503] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[   33.594550] Driver 'sd' needs updating - please use bus_type methods
[   33.594562] Driver 'sr' needs updating - please use bus_type methods
[   33.594708] ata_piix 0000:00:1f.2: version 2.13
[   33.594725] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[   33.594730] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[   33.594792] ata_piix 0000:00:1f.2: setting latency timer to 64
[   33.594885] scsi0 : ata_piix
[   33.595206] scsi1 : ata_piix
[   33.597287] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 20
[   33.597291] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 20
[   33.597323] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[   33.597330] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[   33.597378] ata_piix 0000:00:1f.5: setting latency timer to 64
[   33.597428] scsi2 : ata_piix
[   33.597518] scsi3 : ata_piix
[   33.599541] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 20
[   33.599544] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 20
[   33.600815] Fixed MDIO Bus: probed
[   33.600819] PPP generic driver version 2.4.2
[   33.601047] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   33.601073] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   33.601085] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[   33.601088] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   33.602064] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[   33.605995] ehci_hcd 0000:00:1a.7: debug port 1
[   33.606001] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[   33.606022] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
[   33.615841] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[   33.616138] usb usb1: configuration #1 chosen from 1 choice
[   33.616317] hub 1-0:1.0: USB hub found
[   33.616365] hub 1-0:1.0: 6 ports detected
[   33.616925] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   33.616936] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[   33.616939] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   33.617019] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[   33.620912] ehci_hcd 0000:00:1d.7: debug port 1
[   33.620918] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[   33.620935] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
[   33.630815] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[   33.630950] usb usb2: configuration #1 chosen from 1 choice
[   33.630994] hub 2-0:1.0: USB hub found
[   33.631001] hub 2-0:1.0: 6 ports detected
[   33.631148] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   33.631177] uhci_hcd: USB Universal Host Controller Interface driver
[   33.631221] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   33.631227] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[   33.631230] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   33.631310] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[   33.631344] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[   33.631457] usb usb3: configuration #1 chosen from 1 choice
[   33.631500] hub 3-0:1.0: USB hub found
[   33.631546] hub 3-0:1.0: 2 ports detected
[   33.631696] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[   33.631702] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[   33.631705] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   33.631815] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[   33.631851] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[   33.631960] usb usb4: configuration #1 chosen from 1 choice
[   33.632004] hub 4-0:1.0: USB hub found
[   33.632011] hub 4-0:1.0: 2 ports detected
[   33.632138] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[   33.632144] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[   33.632147] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[   33.632239] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[   33.632274] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
[   33.632387] usb usb5: configuration #1 chosen from 1 choice
[   33.632429] hub 5-0:1.0: USB hub found
[   33.632436] hub 5-0:1.0: 2 ports detected
[   33.632591] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   33.632597] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[   33.632600] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   33.632679] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[   33.632707] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[   33.632827] usb usb6: configuration #1 chosen from 1 choice
[   33.632871] hub 6-0:1.0: USB hub found
[   33.632878] hub 6-0:1.0: 2 ports detected
[   33.633036] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   33.633042] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[   33.633044] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   33.633126] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[   33.633150] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[   33.633279] usb usb7: configuration #1 chosen from 1 choice
[   33.633320] hub 7-0:1.0: USB hub found
[   33.633354] hub 7-0:1.0: 2 ports detected
[   33.633479] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   33.633485] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[   33.633488] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   33.633567] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[   33.633592] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[   33.633703] usb usb8: configuration #1 chosen from 1 choice
[   33.633745] hub 8-0:1.0: USB hub found
[   33.633758] hub 8-0:1.0: 2 ports detected
[   33.633956] PNP: No PS/2 controller found. Probing ports directly.
[   33.636763] serio: i8042 KBD port at 0x60,0x64 irq 1
[   33.636794] serio: i8042 AUX port at 0x60,0x64 irq 12
[   33.637210] mice: PS/2 mouse device common for all mice
[   33.637348] rtc_cmos 00:03: RTC can wake from S4
[   33.637544] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[   33.637571] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[   33.637722] device-mapper: uevent: version 1.0.3
[   33.637844] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[   33.638133] device-mapper: multipath: version 1.0.5 loaded
[   33.638163] device-mapper: multipath round-robin: version 1.0.0 loaded
[   33.639202] cpuidle: using governor ladder
[   33.639965] cpuidle: using governor menu
[   33.640705] TCP cubic registered
[   33.641210] NET: Registered protocol family 10
[   33.642463] lo: Disabled Privacy Extensions
[   33.643261] NET: Registered protocol family 17
[   33.643328] Bluetooth: L2CAP ver 2.13
[   33.643330] Bluetooth: L2CAP socket layer initialized
[   33.643333] Bluetooth: SCO (Voice Link) ver 0.6
[   33.643334] Bluetooth: SCO socket layer initialized
[   33.643594] Bluetooth: RFCOMM socket layer initialized
[   33.643602] Bluetooth: RFCOMM TTY layer initialized
[   33.643604] Bluetooth: RFCOMM ver 1.11
[   33.653574] PM: Resume from disk failed.
[   33.653592] registered taskstats version 1
[   33.653919]   Magic number: 5:945:617
[   33.654175] rtc_cmos 00:03: setting system clock to 2009-08-11 05:38:21 UTC (1249969101)
[   33.654182] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   33.654184] EDD information not available.
[   34.054786] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   34.074510] ata3.00: ATA-7: SAMSUNG HD753LJ, 1AA01112, max UDMA7
[   34.074515] ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   34.094141] ata3.00: configured for UDMA/133
[   34.124050] usb 3-1: new low speed USB device using uhci_hcd and address 2
[   34.290369] usb 3-1: configuration #1 chosen from 1 choice
[   34.358007] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   34.358021] ata1.01: SATA link down (SStatus 0 SControl 300)
[   34.360967] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB01, max UDMA/100
[   34.366967] ata1.00: configured for UDMA/100
[   34.368877] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223B  SB01 PQ: 0 ANSI: 5
[   34.373494] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   34.373498] Uniform CD-ROM driver Revision: 3.20
[   34.373781] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   34.374130] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   34.541585] usb 8-1: new low speed USB device using uhci_hcd and address 2
[   34.705476] usb 8-1: configuration #1 chosen from 1 choice
[   35.134429] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   35.134445] ata2.01: SATA link down (SStatus 0 SControl 300)
[   35.153869] ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
[   35.153873] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   35.172793] ata2.00: configured for UDMA/133
[   35.173054] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  1AA0 PQ: 0 ANSI: 5
[   35.173436] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   35.173554] sd 1:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[   35.173576] sd 1:0:0:0: [sda] Write Protect is off
[   35.173578] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   35.173615] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   35.173642] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD753LJ  1AA0 PQ: 0 ANSI: 5
[   35.173802] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   35.173910] sd 2:0:0:0: [sdb] 1465149168 512-byte hardware sectors: (750 GB/698 GiB)
[   35.173930]  sda:<5>sd 2:0:0:0: [sdb] Write Protect is off
[   35.173932] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   35.173964] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   35.174162]  sdb: sdb1
[   35.181613] sd 2:0:0:0: [sdb] Attached SCSI disk
[   35.185385]  sda1 sda2 < sda5 >
[   35.208062] sd 1:0:0:0: [sda] Attached SCSI disk
[   35.629222] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   35.632695] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   35.632699] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   35.635567] ata4.00: configured for UDMA/133
[   35.635820] scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
[   35.636101] sd 3:0:0:0: Attached scsi generic sg3 type 0
[   35.636153] sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[   35.636171] sd 3:0:0:0: [sdc] Write Protect is off
[   35.636173] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   35.636208] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   35.636330]  sdc: sdc1
[   35.643466] sd 3:0:0:0: [sdc] Attached SCSI disk
[   35.643661] Freeing unused kernel memory: 504k freed
[   35.643758] Write protecting the kernel read-only data: 6996k
[   35.837251] Floppy drive(s): fd0 is 1.44M
[   35.852311] FDC 0 is a post-1991 82077
[   35.859507] usbcore: registered new interface driver hiddev
[   35.871084] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   35.871106] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   35.871128] r8169 0000:04:00.0: setting latency timer to 64
[   35.871238] r8169 0000:04:00.0: irq 53 for MSI/MSI-X
[   35.873068] eth0: RTL8168c/8111c at 0xffffc20000022000, 00:24:8c:a7:6e:2d, XID 3c4000c0 IRQ 53
[   35.879962] input: Cherry GmbH Cherry TouchBoard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[   35.880833] generic-usb 0003:046A:002F.0001: input,hidraw0: USB HID v1.11 Keyboard [Cherry GmbH Cherry TouchBoard] on usb-0000:00:1a.0-1/input0
[   35.906887] input: Cherry GmbH Cherry TouchBoard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4
[   35.907043] generic-usb 0003:046A:002F.0002: input,hidraw1: USB HID v1.11 Mouse [Cherry GmbH Cherry TouchBoard] on usb-0000:00:1a.0-1/input1
[   35.920124] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input5
[   35.920365] generic-usb 0003:046D:C03D.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
[   35.920410] usbcore: registered new interface driver usbhid
[   35.920416] usbhid: v2.6:USB HID core driver
[   36.304059] PM: Starting manual resume from disk
[   36.304072] PM: Resume from partition 8:5
[   36.304073] PM: Checking hibernation image.
[   36.304440] PM: Resume from disk failed.
[   36.347715] EXT4-fs: barriers enabled
[   36.360731] kjournald2 starting: pid 1024, dev sda1:8, commit interval 5 seconds
[   36.360837] EXT4-fs: delayed allocation enabled
[   36.360844] EXT4-fs: file extents enabled
[   36.406006] EXT4-fs: mballoc enabled
[   36.406062] EXT4-fs: mounted filesystem sda1 with ordered data mode
[   39.364563] udev: starting version 141
[   39.763113] yenta_cardbus 0000:06:01.0: CardBus bridge found [1524:1410]
[   39.763135] yenta_cardbus 0000:06:01.0: Using CSCINT to route CSC interrupts to PCI
[   39.763136] yenta_cardbus 0000:06:01.0: Routing CardBus interrupts to PCI
[   39.763141] yenta_cardbus 0000:06:01.0: TI: mfunc 0x00001002, devctl 0x44
[   39.775743] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   39.986605] yenta_cardbus 0000:06:01.0: ISA IRQ mask 0x0000, PCI irq 17
[   39.986609] yenta_cardbus 0000:06:01.0: Socket status: 30000020
[   39.986612] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[   39.986676] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
[   39.986703] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xfb600000 - 0xfbefffff
[   39.986706] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xf5000000 - 0xf6ffffff
[   40.137586] nvidia: module license 'NVIDIA' taints kernel.
[   40.137589] Disabling lock debugging due to kernel taint
[   40.179544] iTCO_vendor_support: vendor-support=0
[   40.209034] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[   40.209109] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[   40.209155] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   40.265902] cfg80211: Calling CRDA to update world regulatory domain
[   40.335851] cfg80211: World regulatory domain updated:
[   40.335854] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   40.335856] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   40.335858] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   40.335860] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   40.335861] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   40.335863] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   40.392500] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[   40.392508] nvidia 0000:02:00.0: setting latency timer to 64
[   40.392654] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.18.03  Fri Jul 31 21:54:40 PDT 2009
[   40.418505] rt61pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   40.453798] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   40.453820] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   40.471353] phy0: Selected rate control algorithm 'minstrel'
[   40.472027] Registered led device: rt61pci-phy0::radio
[   40.472127] Registered led device: rt61pci-phy0::assoc
[   40.503746] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   40.611364] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[   40.611400] pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[   40.611465] yenta_cardbus 0000:06:01.0: EnE: chaning testregister 0xC9, 0e -> 0c
[   40.647677] RME Hammerfall DSP 0000:07:00.0: enabling device (0000 -> 0002)
[   40.647685] RME Hammerfall DSP 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   43.510353] Hammerfall-DSP: wait for FIFO status <= 0 failed after 30 iterations
[   43.510458] RME Hammerfall DSP 0000:07:00.0: firmware: requesting multiface_firmware_rev11.bin
[   43.558780] Hammerfall-DSP: loading firmware
[   46.859098] Hammerfall-DSP: finished firmware loading
[   47.006422] lp: driver loaded but no devices found
[   47.178743] Adding 2000052k swap on /dev/sda5.  Priority:-1 extents:1 across:2000052k 
[   47.724157] EXT4 FS on sda1, internal journal on sda1:8
[   53.073131] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   53.073133] Bluetooth: BNEP filters: protocol multicast
[   53.096698] Bridge firewalling registered
[   54.311418] ppdev: user-space parallel port driver
[   58.146517] r8169: eth0: link down
[   58.147764] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   58.148398] rt61pci 0000:06:00.0: firmware: requesting rt2561.bin
[   58.187206] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   59.614468] wlan0: authenticate with AP 00:24:fe:09:94:18
[   59.616294] wlan0: authenticated
[   59.616298] wlan0: associate with AP 00:24:fe:09:94:18
[   59.618637] wlan0: RX AssocResp from 00:24:fe:09:94:18 (capab=0x401 status=12 aid=1)
[   59.618641] wlan0: AP denied association (code=12)
[   59.816348] wlan0: associate with AP 00:24:fe:09:94:18
[   59.818201] wlan0: RX AssocResp from 00:24:fe:09:94:18 (capab=0x401 status=12 aid=1)
[   59.818205] wlan0: AP denied association (code=12)
[   60.016275] wlan0: associate with AP 00:24:fe:09:94:18
[   60.018111] wlan0: RX AssocResp from 00:24:fe:09:94:18 (capab=0x401 status=12 aid=1)
[   60.018115] wlan0: AP denied association (code=12)
[   60.216199] wlan0: association with AP 00:24:fe:09:94:18 timed out
[   85.816991] wlan0: authenticate with AP 00:24:fe:09:94:18
[   85.819890] wlan0: authenticate with AP 00:24:fe:09:94:18
[   85.821949] wlan0: authenticated
[   85.821954] wlan0: associate with AP 00:24:fe:09:94:18
[   85.825749] wlan0: RX AssocResp from 00:24:fe:09:94:18 (capab=0x401 status=0 aid=1)
[   85.825753] wlan0: associated
[   85.827490] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   95.979123] wlan0: no IPv6 routers present

[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: hard freezes with hdsp with cardbus/pci adapter card

[Tim Blechmann]

[-- Attachment #1.1: Type: text/plain, Size: 1867 bytes --]

hm, actually, i think the issue is related to the pci latency of the
cardbus controller.

after changing the latency timer of the card to 0xff, i am running the
system for about an hour without freeze. the new output of lspci is:

06:01.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller
(rev 01)
	Subsystem: ENE Technology Inc CB1410 Cardbus Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 255, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fb600000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
	Memory window 0: c4000000-c7fff000 (prefetchable)
	Memory window 1: c8000000-cbfff000
	I/O window 0: 0000e000-0000e0ff
	I/O window 1: 0000e400-0000e4ff
	BridgeCtl: Parity+ SERR+ ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket


i am not sure, whether it is related, but the hdsp driver sets its
latency timer to 0xff as well, commented with:

	/* From Martin Bjoernsen :
	    "It is important that the card's latency timer register in
	    the PCI configuration space is set to a value much larger
	    than 0 by the computer's BIOS or the driver.
	    The windows driver always sets this 8 bit register [...]
	    to its maximum 255 to avoid problems with some computers."
	*/

maybe the ene bridge doesn't like to have devices connected, with a
higher latency timer value, that it is using itself?

tim

-- 
tim@klingt.org
http://tim.klingt.org

Every word is like an unnecessary stain on silence and nothingness
  Samuel Beckett


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: hard freezes with hdsp with cardbus/pci adapter card

[Wolfram Sang]

[-- Attachment #1.1: Type: text/plain, Size: 477 bytes --]

Hi Tim,

> hm, actually, i think the issue is related to the pci latency of the
> cardbus controller.

Looks like it:

http://lkml.indiana.edu/hypermail/linux/kernel/0404.1/0602.html

Do you know if the increased latency is needed for all bridges, not just ENE?
(I'd assume so...)

Regards,

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: hard freezes with hdsp with cardbus/pci adapter card

[Tim Blechmann]

[-- Attachment #1.1: Type: text/plain, Size: 825 bytes --]

On 08/11/2009 11:25 AM, Wolfram Sang wrote:
> Hi Tim,
> 
>> hm, actually, i think the issue is related to the pci latency of the
>> cardbus controller.
> 
> Looks like it:
> 
> http://lkml.indiana.edu/hypermail/linux/kernel/0404.1/0602.html
> 
> Do you know if the increased latency is needed for all bridges, not just ENE?
> (I'd assume so...)

i remember that issue, it had different symptoms (distorted sound) ...
the ene bridge seems to be the only cardbus bridge, that requires the
increased latency, but maybe other controllers are just more robust and
don't completely freeze the system

cheers, tim

-- 
tim@klingt.org
http://tim.klingt.org

Happiness is a byproduct of function, purpose, and conflict; those who
seek happiness for itself seek victory without war.
  William S. Burroughs


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: hard freezes with hdsp with cardbus/pci adapter card

[Tim Blechmann]

[-- Attachment #1.1: Type: text/plain, Size: 1122 bytes --]

>>> hm, actually, i think the issue is related to the pci latency of the
>>> cardbus controller.
>>
>> Looks like it:
>>
>> http://lkml.indiana.edu/hypermail/linux/kernel/0404.1/0602.html
>>
>> Do you know if the increased latency is needed for all bridges, not just ENE?
>> (I'd assume so...)
> 
> i remember that issue, it had different symptoms (distorted sound) ...
> the ene bridge seems to be the only cardbus bridge, that requires the
> increased latency, but maybe other controllers are just more robust and
> don't completely freeze the system

hm, i guess, it is not that easy ... having the hdsp running at 44.1khz,
the machine ran for several hours, but when i switch the sampling rate
to 96khz, the machine freezes quickly.

also playing with the pci latency settings of cardbus bridge and hdsp
didn't change this. from my understanding the only difference between
44.1khz and 96khz in terms of the higher bandwidth ...

tim

-- 
tim@klingt.org
http://tim.klingt.org

Your mind will answer most questions if you learn to relax and wait
for the answer.
  William S. Burroughs


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel