* [PATCH,V2 0/6] libtool 2.4 upgrade
@ 2010-10-07 1:46 Khem Raj
2010-10-07 1:46 ` [PATCH,V2 1/6] libtool-2.4: Add recipes for libtool 2.4 Khem Raj
` (7 more replies)
0 siblings, 8 replies; 19+ messages in thread
From: Khem Raj @ 2010-10-07 1:46 UTC (permalink / raw)
To: openembedded-devel
Hi
Following set of patches is v2 of the patches adding support for getting libtool 2.4 into
openemebedded. I have so far built minimal-image for two machines successfully using old
and new libtool.
The libtool sysroot feature knob is added through LIBTOOL_HAS_SYSROOT variable. If this is
set to "yes" then you ought to use libtool > 2.4 by default its set to "no" which means
the current behavior remains.
The big change that libtool 2.4 brings is sysroot support and I have added
support to use this feature. It should make our life easier.
This needs a lot of testing.
Please cherry pick the patch bundle and give it a try in yout environment
Some distros pin libtool version to 2.2.6b
include/preferred-slugos-versions.inc
include/angstrom-2008-preferred-versions.inc
include/kaeilos-2009-preferred-versions.inc
include/angstrom-2010-preferred-versions.inc
include/preferred-shr-versions.inc
So if you are using one of these distro's then you might have
to override the version in your local.conf
LIBTOOL_HAS_SYSROOT = "yes"
LIBTOOL_VER = "2.4"
PREFERRED_VERSION_libtool = "${LIBTOOL_VER}"
PREFERRED_VERSION_libtool-native = "${LIBTOOL_VER}"
PREFERRED_VERSION_libtool-cross = "${LIBTOOL_VER}"
PREFERRED_VERSION_libtool-nativesdk = "${LIBTOOL_VER}"
PREFERRED_VERSION_libtool-sdk = "${LIBTOOL_VER}"
Please review, test, and provide feedback
Thanks
-Khem
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH,V2 1/6] libtool-2.4: Add recipes for libtool 2.4
2010-10-07 1:46 [PATCH,V2 0/6] libtool 2.4 upgrade Khem Raj
@ 2010-10-07 1:46 ` Khem Raj
2010-10-07 1:46 ` [PATCH,V2 2/6] bitbake.conf: Define LIBTOOL_HAS_SYSROOT Khem Raj
` (6 subsequent siblings)
7 siblings, 0 replies; 19+ messages in thread
From: Khem Raj @ 2010-10-07 1:46 UTC (permalink / raw)
To: openembedded-devel
* Add fixes needed for sysroot working within libtool
Signed-off-by: Khem Raj <raj.khem@gmail.com>
---
recipes/libtool/libtool-2.4/cross.patch | 34 +++++++
.../libtool/libtool-2.4/prefix-manpage-fix.patch | 19 ++++
recipes/libtool/libtool-2.4/prefix.patch | 100 ++++++++++++++++++++
recipes/libtool/libtool-2.4/resolve-sysroot.patch | 18 ++++
recipes/libtool/libtool-2.4/trailingslash.patch | 32 ++++++
recipes/libtool/libtool-cross_2.4.bb | 34 +++++++
recipes/libtool/libtool-native_2.4.bb | 22 +++++
recipes/libtool/libtool-nativesdk_2.4.bb | 26 +++++
recipes/libtool/libtool-sdk_2.4.bb | 54 +++++++++++
recipes/libtool/libtool_2.4.bb | 40 ++++++++
10 files changed, 379 insertions(+), 0 deletions(-)
create mode 100644 recipes/libtool/libtool-2.4/cross.patch
create mode 100644 recipes/libtool/libtool-2.4/prefix-manpage-fix.patch
create mode 100644 recipes/libtool/libtool-2.4/prefix.patch
create mode 100644 recipes/libtool/libtool-2.4/resolve-sysroot.patch
create mode 100644 recipes/libtool/libtool-2.4/trailingslash.patch
create mode 100644 recipes/libtool/libtool-cross_2.4.bb
create mode 100644 recipes/libtool/libtool-native_2.4.bb
create mode 100644 recipes/libtool/libtool-nativesdk_2.4.bb
create mode 100644 recipes/libtool/libtool-sdk_2.4.bb
create mode 100644 recipes/libtool/libtool_2.4.bb
diff --git a/recipes/libtool/libtool-2.4/cross.patch b/recipes/libtool/libtool-2.4/cross.patch
new file mode 100644
index 0000000..fb25e38
--- /dev/null
+++ b/recipes/libtool/libtool-2.4/cross.patch
@@ -0,0 +1,34 @@
+Index: libtool-2.4/libltdl/config/ltmain.m4sh
+===================================================================
+--- libtool-2.4.orig/libltdl/config/ltmain.m4sh
++++ libtool-2.4/libltdl/config/ltmain.m4sh
+@@ -6121,8 +6121,6 @@ func_mode_link ()
+ add="$libdir/$linklib"
+ fi
+ else
+- # We cannot seem to hardcode it, guess we'll fake it.
+- add_dir="-L$libdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+@@ -6277,8 +6275,18 @@ func_mode_link ()
+ fi
+ ;;
+ *)
+- path="-L$absdir/$objdir"
+- ;;
++ # OE sets installed=no in staging. We need to look in $objdir and $absdir,
++ # preferring $objdir. RP 31/04/2008
++ if test -f "$absdir/$objdir/$depdepl" ; then
++ depdepl="$absdir/$objdir/$depdepl"
++ path="-L$absdir/$objdir"
++ elif test -f "$absdir/$depdepl" ; then
++ depdepl="$absdir/$depdepl"
++ path="-L$absdir"
++ else
++ path="-L$absdir/$objdir"
++ fi
++ ;;
+ esac
+ else
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
diff --git a/recipes/libtool/libtool-2.4/prefix-manpage-fix.patch b/recipes/libtool/libtool-2.4/prefix-manpage-fix.patch
new file mode 100644
index 0000000..4728669
--- /dev/null
+++ b/recipes/libtool/libtool-2.4/prefix-manpage-fix.patch
@@ -0,0 +1,19 @@
+For cross environment, it not possible to run the generated executable.
+nstead use the build version of libtool to generate the man pages.
+
+Date: 2010/07/09
+Signed-Off-By: Nitin A Kamble <nitin.a.kamble@intel.com>
+
+Index: libtool-2.2.10/Makefile.am
+===================================================================
+--- libtool-2.2.10.orig/Makefile.am
++++ libtool-2.2.10/Makefile.am
+@@ -337,7 +337,7 @@ update_mans = \
+ PATH=.$(PATH_SEPARATOR)$$PATH; export PATH; \
+ $(HELP2MAN) --output=$@
+ $(srcdir)/doc/libtool.1: $(srcdir)/$(auxdir)/ltmain.sh
+- $(update_mans) --help-option=--help-all libtool
++ $(update_mans) --help-option=--help-all ${build_alias}-libtool
+ $(srcdir)/doc/libtoolize.1: $(srcdir)/libtoolize.in
+ $(update_mans) libtoolize
+
diff --git a/recipes/libtool/libtool-2.4/prefix.patch b/recipes/libtool/libtool-2.4/prefix.patch
new file mode 100644
index 0000000..70bbd15
--- /dev/null
+++ b/recipes/libtool/libtool-2.4/prefix.patch
@@ -0,0 +1,100 @@
+Renames "libtool" -> "${TARGET_PREFIX}libtool" which makes sure
+it can't be confused with the host libtool.
+
+Originally by: RP
+
+Updated: Date: 2010/06/28
+Nitin A Kamble <nitin.a.kamble@intel.com>
+
+
+Index: libtool-2.4/libltdl/m4/libtool.m4
+===================================================================
+--- libtool-2.4.orig/libltdl/m4/libtool.m4
++++ libtool-2.4/libltdl/m4/libtool.m4
+@@ -94,7 +94,8 @@ _LT_SET_OPTIONS([$0], [$1])
+ LIBTOOL_DEPS="$ltmain"
+
+ # Always use our own libtool.
+-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++LIBTOOL='$(SHELL) $(top_builddir)'
++LIBTOOL="$LIBTOOL/${host_alias}-libtool"
+ AC_SUBST(LIBTOOL)dnl
+
+ _LT_SETUP
+@@ -204,7 +205,7 @@ aix3*)
+ esac
+
+ # Global variables:
+-ofile=libtool
++ofile=${host_alias}-libtool
+ can_build_shared=yes
+
+ # All known linkers require a `.a' archive for static linking (except MSVC,
+Index: libtool-2.4/Makefile.am
+===================================================================
+--- libtool-2.4.orig/Makefile.am
++++ libtool-2.4/Makefile.am
+@@ -31,7 +31,7 @@ AM_LDFLAGS =
+ DIST_SUBDIRS = .
+ EXTRA_DIST =
+
+-BUILT_SOURCES = libtool libtoolize
++BUILT_SOURCES = $(host_alias)-libtool libtoolize
+
+ CLEANFILES =
+ MOSTLYCLEANFILES =
+@@ -65,7 +65,7 @@ rebuild = rebuild=:; $(timestamp); corre
+ ## ---------------- ##
+
+ # The libtool distributor and the standalone libtool script.
+-bin_SCRIPTS = libtoolize libtool
++bin_SCRIPTS = libtoolize $(host_alias)-libtool
+
+ libtoolize: $(srcdir)/libtoolize.in $(top_builddir)/config.status
+ rm -f libtoolize.tmp libtoolize
+@@ -90,8 +90,8 @@ $(srcdir)/libtoolize.in: $(sh_files) lib
+ # We used to do this with a 'stamp-vcl' file, but non-gmake builds
+ # would rerun configure on every invocation, so now we manually
+ # check the version numbers from the build rule when necessary.
+-libtool: $(top_builddir)/config.status $(srcdir)/$(auxdir)/ltmain.sh ChangeLog
+- @target=libtool; $(rebuild); \
++$(host_alias)-libtool: $(top_builddir)/config.status $(srcdir)/$(auxdir)/ltmain.sh ChangeLog
++ @target=$(host_alias)-libtool; $(rebuild); \
+ if test -f "$$target"; then \
+ set dummy `./$$target --version | sed 1q`; actualver="$$5"; \
+ test "$$actualver" = "$$correctver" && rebuild=false; \
+@@ -100,8 +100,8 @@ libtool: $(top_builddir)/config.status $
+ case $$prereq in *ChangeLog);; *) rebuild=:;; esac; \
+ done; \
+ if $$rebuild; then \
+- echo $(SHELL) ./config.status $$target; \
+- cd $(top_builddir) && $(SHELL) ./config.status $$target; \
++ echo $(SHELL) ./config.status libtool; \
++ cd $(top_builddir) && $(SHELL) ./config.status libtool; \
+ fi
+
+ .PHONY: configure-subdirs
+@@ -146,7 +146,7 @@ EXTRA_DIST += bootstrap $(srcdir)/li
+ ChangeLog.2002 ChangeLog.2003 ChangeLog.2004 \
+ ChangeLog.2005 ChangeLog.2006 ChangeLog.2007 \
+ ChangeLog.2008 ChangeLog.2009
+-CLEANFILES += libtool libtoolize libtoolize.tmp \
++CLEANFILES += $(host_alias)-libtool libtoolize libtoolize.tmp \
+ $(auxdir)/ltmain.tmp $(m4dir)/ltversion.tmp
+
+ ## We build ltversion.m4 here, instead of from config.status,
+@@ -526,12 +526,12 @@ TESTS_ENVIRONMENT = MAKE="$(MAKE)" CC="$
+
+ BUILDCHECK_ENVIRONMENT = _lt_pkgdatadir="$(abs_top_srcdir)" \
+ LIBTOOLIZE="$(abs_top_builddir)/libtoolize" \
+- LIBTOOL="$(abs_top_builddir)/libtool" \
++ LIBTOOL="$(abs_top_builddir)/$(host_alias)-libtool" \
+ tst_aclocaldir="$(abs_top_srcdir)/libltdl/m4"
+
+ INSTALLCHECK_ENVIRONMENT = \
+ LIBTOOLIZE="$(bindir)/`echo libtoolize | sed '$(program_transform_name)'`" \
+- LIBTOOL="$(bindir)/`echo libtool | sed '$(program_transform_name)'`" \
++ LIBTOOL="$(bindir)/`echo $(host_alias)-libtool | sed '$(program_transform_name)'`" \
+ LTDLINCL="-I$(includedir)" \
+ LIBLTDL="$(libdir)/libltdl.la" \
+ tst_aclocaldir="$(aclocaldir)"
diff --git a/recipes/libtool/libtool-2.4/resolve-sysroot.patch b/recipes/libtool/libtool-2.4/resolve-sysroot.patch
new file mode 100644
index 0000000..57689a5
--- /dev/null
+++ b/recipes/libtool/libtool-2.4/resolve-sysroot.patch
@@ -0,0 +1,18 @@
+Sometimes .las have =/a/b/c.la in dependency_libs this should be
+resolved to sysroot
+-Khem
+
+Index: libtool-2.4/libltdl/config/ltmain.m4sh
+===================================================================
+--- libtool-2.4.orig/libltdl/config/ltmain.m4sh
++++ libtool-2.4/libltdl/config/ltmain.m4sh
+@@ -8480,7 +8480,8 @@ EOF
+ *.la)
+ func_basename "$deplib"
+ name="$func_basename_result"
+- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
++ func_resolve_sysroot "$deplib"
++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
diff --git a/recipes/libtool/libtool-2.4/trailingslash.patch b/recipes/libtool/libtool-2.4/trailingslash.patch
new file mode 100644
index 0000000..313c262
--- /dev/null
+++ b/recipes/libtool/libtool-2.4/trailingslash.patch
@@ -0,0 +1,32 @@
+A command like /bin/sh ../../i586-poky-linux-libtool --mode=install /usr/bin/install -c gck-roots-store-standalone.la '/media/data1/builds/poky1/tmp/work/core2-poky-linux/gnome-keyring-2.26.1-r1/image/usr/lib/gnome-keyring/standalone/' fails (e.g. gnome-keyring or pulseaudio)
+
+This is because libdir has a trailing slash which breaks the comparision.
+
+RP 2/1/10
+
+Merged a patch received from Gary Thomas <gary@mlbassoc.com>
+
+Date: 2010/07/12
+Nitin A Kamble <nitin.a.kamble@intel.com>
+
+Index: libtool-2.2.10/libltdl/config/ltmain.m4sh
+===================================================================
+--- libtool-2.2.10.orig/libltdl/config/ltmain.m4sh
++++ libtool-2.2.10/libltdl/config/ltmain.m4sh
+@@ -1634,8 +1634,15 @@ func_mode_install ()
+ dir="$dir$objdir"
+
+ if test -n "$relink_command"; then
++ # Strip any trailing slash from the destination.
++ func_stripname '' '/' "$libdir"
++ destlibdir=$func_stripname_result
++
++ func_stripname '' '/' "$destdir"
++ s_destdir=$func_stripname_result
++
+ # Determine the prefix the user has applied to our future dir.
+- inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
++ inst_prefix_dir=`$ECHO "X$s_destdir" | $Xsed -e "s%$destlibdir\$%%"`
+
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
diff --git a/recipes/libtool/libtool-cross_2.4.bb b/recipes/libtool/libtool-cross_2.4.bb
new file mode 100644
index 0000000..e20c2c3
--- /dev/null
+++ b/recipes/libtool/libtool-cross_2.4.bb
@@ -0,0 +1,34 @@
+require libtool_${PV}.bb
+
+PACKAGES = ""
+SRC_URI_append = " file://prefix.patch \
+ file://cross.patch \
+ "
+
+DEPENDS += "libtool-native"
+
+do_configure_prepend () {
+ # Remove any existing libtool m4 since old stale versions would break
+ # any upgrade
+ rm -f ${STAGING_DATADIR}/aclocal/libtool.m4
+ rm -f ${STAGING_DATADIR}/aclocal/lt*.m4
+}
+
+do_install () {
+ install -d ${D}${bindir}/
+ install -m 0755 ${HOST_SYS}-libtool ${D}${bindir}/${HOST_SYS}-libtool
+ install -d ${D}${datadir}/libtool/
+ install -d ${D}${datadir}/aclocal/
+ install -c ${S}/libltdl/config/config.guess ${D}${datadir}/libtool/
+ install -c ${S}/libltdl/config/config.sub ${D}${datadir}/libtool/
+ install -c -m 0644 ${S}/libltdl/config/ltmain.sh ${D}${datadir}/libtool/
+ install -c -m 0644 ${S}/libltdl/m4/libtool.m4 ${D}${datadir}/aclocal/
+ install -c -m 0644 ${S}/libltdl/m4/ltdl.m4 ${D}${datadir}/aclocal/
+}
+
+SYSROOT_PREPROCESS_FUNCS += "libtoolcross_sysroot_preprocess"
+
+libtoolcross_sysroot_preprocess () {
+ install -d ${SYSROOT_DESTDIR}${STAGING_BINDIR_CROSS}/
+ install -m 755 ${D}${bindir}/${HOST_SYS}-libtool ${SYSROOT_DESTDIR}${STAGING_BINDIR_CROSS}/${HOST_SYS}-libtool
+}
diff --git a/recipes/libtool/libtool-native_2.4.bb b/recipes/libtool/libtool-native_2.4.bb
new file mode 100644
index 0000000..82b2419
--- /dev/null
+++ b/recipes/libtool/libtool-native_2.4.bb
@@ -0,0 +1,22 @@
+require libtool_${PV}.bb
+
+DEPENDS = ""
+
+SRC_URI_append = " file://prefix.patch \
+ file://cross.patch \
+ "
+
+inherit native
+EXTRA_OECONF = " --with-sysroot=${STAGING_DIR_NATIVE}"
+do_configure_prepend () {
+ # Remove any existing libtool m4 since old stale versions would break
+ # any upgrade
+ rm -f ${STAGING_DATADIR}/aclocal/libtool.m4
+ rm -f ${STAGING_DATADIR}/aclocal/lt*.m4
+}
+
+do_install () {
+ autotools_do_install
+ install -d ${D}${bindir}/
+ install -m 0755 ${HOST_SYS}-libtool ${D}${bindir}/${HOST_SYS}-libtool
+}
diff --git a/recipes/libtool/libtool-nativesdk_2.4.bb b/recipes/libtool/libtool-nativesdk_2.4.bb
new file mode 100644
index 0000000..34f728a
--- /dev/null
+++ b/recipes/libtool/libtool-nativesdk_2.4.bb
@@ -0,0 +1,26 @@
+require libtool_${PV}.bb
+
+SRC_URI_append = " file://prefix.patch \
+ file://cross.patch \
+ "
+
+inherit nativesdk
+do_configure_prepend () {
+ # Remove any existing libtool m4 since old stale versions would break
+ # any upgrade
+ rm -f ${STAGING_DATADIR}/aclocal/libtool.m4
+ rm -f ${STAGING_DATADIR}/aclocal/lt*.m4
+}
+
+do_install () {
+ autotools_do_install
+ install -d ${D}${bindir}/
+ install -m 0755 ${HOST_SYS}-libtool ${D}${bindir}/
+}
+
+SYSROOT_PREPROCESS_FUNCS += "libtoolnativesdk_sysroot_preprocess"
+
+libtoolnativesdk_sysroot_preprocess () {
+ install -d ${SYSROOT_DESTDIR}${STAGING_BINDIR_CROSS}/
+ install -m 755 ${D}${bindir}/${HOST_SYS}-libtool ${SYSROOT_DESTDIR}${STAGING_BINDIR_CROSS}/${HOST_SYS}-libtool
+}
diff --git a/recipes/libtool/libtool-sdk_2.4.bb b/recipes/libtool/libtool-sdk_2.4.bb
new file mode 100644
index 0000000..f7d6cb5
--- /dev/null
+++ b/recipes/libtool/libtool-sdk_2.4.bb
@@ -0,0 +1,54 @@
+require libtool_${PV}.bb
+
+PR = "${INC_PR}.0"
+SRC_URI_append = " file://cross_compile.patch"
+
+inherit sdk
+
+do_install () {
+ install -d ${D}${bindir}/
+ install -m 0755 libtool ${D}${bindir}/
+ install -m 0755 libtoolize ${D}${bindir}/
+
+ install -d ${D}${libdir}/
+ oe_libinstall -a -so -C libltdl libltdl ${D}${libdir}
+
+ install -d ${D}${includedir}/
+ install -m 0644 libltdl/ltdl.h ${D}${includedir}
+
+ install -d ${D}${datadir}/libtool/config/
+ install -c ${S}/libltdl/config/config.guess ${D}${datadir}/libtool/
+ install -c ${S}/libltdl/config/config.sub ${D}${datadir}/libtool/
+ install -c -m 0644 ${S}/libltdl/config/ltmain.sh ${D}${datadir}/libtool/config/
+
+ install -d ${D}${datadir}/aclocal/
+ install -c -m 0644 ${S}/libltdl/m4/libtool.m4 ${D}${datadir}/aclocal/
+ install -c -m 0644 ${S}/libltdl/m4/ltdl.m4 ${D}${datadir}/aclocal/
+ install -c -m 0644 ${S}/libltdl/m4/ltoptions.m4 ${D}${datadir}/aclocal/
+ install -c -m 0644 ${S}/libltdl/m4/ltversion.m4 ${D}${datadir}/aclocal/
+ install -c -m 0644 ${S}/libltdl/m4/ltsugar.m4 ${D}${datadir}/aclocal/
+ install -c -m 0644 ${S}/libltdl/m4/lt~obsolete.m4 ${D}${datadir}/aclocal/
+}
+
+do_stage () {
+ install -d ${STAGING_BINDIR}/
+ install -m 0755 libtool ${STAGING_BINDIR}/${HOST_SYS}-libtool
+ install -m 0755 libtoolize ${STAGING_BINDIR}/libtoolize
+
+ oe_libinstall -a -so -C libltdl libltdl ${STAGING_LIBDIR}
+ install -d ${STAGING_INCDIR}
+ install -m 0644 libltdl/ltdl.h ${STAGING_INCDIR}/
+
+ install -d ${STAGING_DATADIR}/libtool/config/
+ install -c ${S}/libltdl/config/config.guess ${STAGING_DATADIR}/libtool/
+ install -c ${S}/libltdl/config/config.sub ${STAGING_DATADIR}/libtool/
+ install -c -m 0644 ${S}/libltdl/config/ltmain.sh ${STAGING_DATADIR}/libtool/config/
+
+ install -d ${STAGING_DATADIR}/aclocal/
+ install -c -m 0644 ${S}/libltdl/m4/libtool.m4 ${STAGING_DATADIR}/aclocal/
+ install -c -m 0644 ${S}/libltdl/m4/ltdl.m4 ${STAGING_DATADIR}/aclocal/
+ install -c -m 0644 ${S}/libltdl/m4/ltoptions.m4 ${STAGING_DATADIR}/aclocal/
+ install -c -m 0644 ${S}/libltdl/m4/ltversion.m4 ${STAGING_DATADIR}/aclocal/
+ install -c -m 0644 ${S}/libltdl/m4/ltsugar.m4 ${STAGING_DATADIR}/aclocal/
+ install -c -m 0644 ${S}/libltdl/m4/lt~obsolete.m4 ${STAGING_DATADIR}/aclocal/
+}
diff --git a/recipes/libtool/libtool_2.4.bb b/recipes/libtool/libtool_2.4.bb
new file mode 100644
index 0000000..ffc525d
--- /dev/null
+++ b/recipes/libtool/libtool_2.4.bb
@@ -0,0 +1,40 @@
+require libtool.inc
+DEPENDS = "libtool-native"
+PR = "${INC_PR}.0"
+
+SRC_URI = "${GNU_MIRROR}/libtool/libtool-${PV}.tar.gz \
+ file://trailingslash.patch \
+ file://prefix-manpage-fix.patch \
+ file://resolve-sysroot.patch \
+ "
+SRC_URI[md5sum] = "b32b04148ecdd7344abc6fe8bd1bb021"
+SRC_URI[sha256sum] = "13df57ab63a94e196c5d6e95d64e53262834fe780d5e82c28f177f9f71ddf62e"
+PACKAGES =+ "libltdl libltdl-dev libltdl-dbg"
+FILES_${PN} += "${datadir}/aclocal*"
+FILES_libltdl = "${libdir}/libltdl.so.*"
+FILES_libltdl-dev = "${libdir}/libltdl.* ${includedir}/ltdl.h"
+FILES_libltdl-dbg = "${libdir}/.debug/"
+
+inherit autotools
+
+EXTRA_AUTORECONF = "--exclude=libtoolize"
+EXTRA_OECONF = " --with-sysroot"
+do_compile_prepend () {
+ # Sometimes this file doesn't get rebuilt, force the issue
+ rm -f ${S}/libltdl/config/ltmain.sh
+ make libltdl/config/ltmain.sh
+}
+
+#
+# We want the results of libtool-cross preserved - don't stage anything ourselves.
+#
+SYSROOT_PREPROCESS_FUNCS += "libtool_sysroot_preprocess"
+
+libtool_sysroot_preprocess () {
+ if [ "${PN}" == "libtool" ]; then
+ rm -rf ${SYSROOT_DESTDIR}${STAGING_DIR_TARGET}${bindir}/*
+ rm -rf ${SYSROOT_DESTDIR}${STAGING_DIR_TARGET}${datadir}/aclocal/*
+ rm -rf ${SYSROOT_DESTDIR}${STAGING_DIR_TARGET}${datadir}/libtool/config/*
+ fi
+}
+
--
1.7.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH,V2 2/6] bitbake.conf: Define LIBTOOL_HAS_SYSROOT
2010-10-07 1:46 [PATCH,V2 0/6] libtool 2.4 upgrade Khem Raj
2010-10-07 1:46 ` [PATCH,V2 1/6] libtool-2.4: Add recipes for libtool 2.4 Khem Raj
@ 2010-10-07 1:46 ` Khem Raj
2010-10-07 1:46 ` [PATCH, V2 3/6] autotools.bbclass: Conditionally use autotools_prepackage_lamangler Khem Raj
` (5 subsequent siblings)
7 siblings, 0 replies; 19+ messages in thread
From: Khem Raj @ 2010-10-07 1:46 UTC (permalink / raw)
To: openembedded-devel
* Set default weak to "no"
* Use in TARGET_LDFLAGS
Signed-off-by: Khem Raj <raj.khem@gmail.com>
---
conf/bitbake.conf | 13 +++++++++----
1 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/conf/bitbake.conf b/conf/bitbake.conf
index 4e80d97..7f01f8f 100644
--- a/conf/bitbake.conf
+++ b/conf/bitbake.conf
@@ -414,6 +414,13 @@ EXTRA_IMAGEDEPENDS = ""
##################################################################
# Toolchain info.
##################################################################
+
+# This variable is needed to set to 'yes' in conjuction with
+# PREFERRED_VERSION for libtool when choosing libtool >= 2.4
+# by default this is unset and should be so for libtools < 2.4
+
+LIBTOOL_HAS_SYSROOT ?= "no"
+
PATH_prepend = "${STAGING_BINDIR_CROSS}:${STAGING_DIR_NATIVE}${sbindir_native}:${STAGING_BINDIR_NATIVE}:${STAGING_DIR_NATIVE}${base_sbindir_native}:${STAGING_DIR_NATIVE}/${base_bindir_native}:"
export PATH
@@ -484,10 +491,8 @@ export BUILD_LDFLAGS = "-L${STAGING_LIBDIR_NATIVE} \
-Wl,-rpath,${STAGING_LIBDIR_NATIVE} -Wl,-O1"
export LDFLAGS = "${TARGET_LDFLAGS}"
-export TARGET_LDFLAGS = "-L${STAGING_DIR_TARGET}${libdir} \
- -Wl,-rpath-link,${STAGING_DIR_TARGET}${libdir} \
- -Wl,-O1 \
- ${TARGET_LINK_HASH_STYLE}"
+export TARGET_LDFLAGS = '${@["-L${STAGING_DIR_TARGET}${libdir} -Wl,-rpath-link,${STAGING_DIR_TARGET}${libdir} -Wl,-O1 ${TARGET_LINK_HASH_STYLE}", "-Wl,-O1 ${TARGET_LINK_HASH_STYLE}"][bb.data.getVar('LIBTOOL_HAS_SYSROOT', d, 1) == "yes"]}'
+
export SDK_LDFLAGS = "-L${STAGING_DIR_SDK}${libdir} \
-Wl,-rpath-link,${STAGING_DIR_SDK}${libdir} \
-Wl,-O1"
--
1.7.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH, V2 3/6] autotools.bbclass: Conditionally use autotools_prepackage_lamangler
2010-10-07 1:46 [PATCH,V2 0/6] libtool 2.4 upgrade Khem Raj
2010-10-07 1:46 ` [PATCH,V2 1/6] libtool-2.4: Add recipes for libtool 2.4 Khem Raj
2010-10-07 1:46 ` [PATCH,V2 2/6] bitbake.conf: Define LIBTOOL_HAS_SYSROOT Khem Raj
@ 2010-10-07 1:46 ` Khem Raj
2010-10-07 1:46 ` [PATCH, V2 4/6] cross.bbclass, staging.bbclass, utils.bbclass: Make sure that .la munging is not done for libtool > 2.4 Khem Raj
` (4 subsequent siblings)
7 siblings, 0 replies; 19+ messages in thread
From: Khem Raj @ 2010-10-07 1:46 UTC (permalink / raw)
To: openembedded-devel
* autotools_prepackage_lamangler is not needed with libtool 2.4+
* add --with-sysroot when using libtool 2.4+
Signed-off-by: Khem Raj <raj.khem@gmail.com>
---
classes/autotools.bbclass | 7 ++++---
1 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/classes/autotools.bbclass b/classes/autotools.bbclass
index b2de2b1..ce4f66a 100644
--- a/classes/autotools.bbclass
+++ b/classes/autotools.bbclass
@@ -79,7 +79,9 @@ CONFIGUREOPTS = " --build=${BUILD_SYS} \
oe_runconf () {
if [ -x ${S}/configure ] ; then
- ${S}/configure ${CONFIGUREOPTS} ${EXTRA_OECONF} "$@"
+ ${S}/configure \
+ ${@["","--with-sysroot"][bb.data.getVar('LIBTOOL_HAS_SYSROOT', d, 1) == "yes"]} \
+ ${CONFIGUREOPTS} ${EXTRA_OECONF} "$@"
else
oefatal "no configure script found"
fi
@@ -170,8 +172,7 @@ autotools_do_install() {
oe_runmake 'DESTDIR=${D}' install
}
-PACKAGE_PREPROCESS_FUNCS += "autotools_prepackage_lamangler"
-
+PACKAGE_PREPROCESS_FUNCS += "${@['autotools_prepackage_lamangler',''][bb.data.getVar('LIBTOOL_HAS_SYSROOT', d, 1) == "yes"]}"
autotools_prepackage_lamangler () {
for i in `find ${PKGD} -name "*.la"` ; do \
sed -i -e 's:${STAGING_LIBDIR}:${libdir}:g;' \
--
1.7.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH, V2 4/6] cross.bbclass, staging.bbclass, utils.bbclass: Make sure that .la munging is not done for libtool > 2.4
2010-10-07 1:46 [PATCH,V2 0/6] libtool 2.4 upgrade Khem Raj
` (2 preceding siblings ...)
2010-10-07 1:46 ` [PATCH, V2 3/6] autotools.bbclass: Conditionally use autotools_prepackage_lamangler Khem Raj
@ 2010-10-07 1:46 ` Khem Raj
2010-10-07 1:46 ` [PATCH, V2 5/6] insane.bbclass: If LIBTOOL_HAS_SYSROOT is set then do not check for la insanity Khem Raj
` (3 subsequent siblings)
7 siblings, 0 replies; 19+ messages in thread
From: Khem Raj @ 2010-10-07 1:46 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Khem Raj <raj.khem@gmail.com>
---
classes/cross.bbclass | 7 +++----
classes/staging.bbclass | 19 ++++++++++---------
classes/utils.bbclass | 2 +-
3 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/classes/cross.bbclass b/classes/cross.bbclass
index d3b27e6..1a6d906 100644
--- a/classes/cross.bbclass
+++ b/classes/cross.bbclass
@@ -74,8 +74,7 @@ sysroot_stage_all() {
}
#
-# Cross .la files have more path issues we have to correct
-SYSROOTEXTRALIBDIRSED = '-e "/^libdir=/s,.*,libdir=${STAGING_DIR_TARGET}${target_libdir},g" \
- -e "/^dependency_libs=/s,\([[:space:]']\)-L${STAGING_LIBDIR_NATIVE},,g" \
-'
+# Cross .la files have more path issues we have to correct only for libtool < 2.4
+SYSROOTEXTRALIBDIRSED_OLD = " -e \"/^libdir=/s,.*,libdir=${STAGING_DIR_TARGET}${target_libdir},g\" -e \"/^dependency_libs=/s,\([[:space:]']\)-L${STAGING_LIBDIR_NATIVE},,g\""
+SYSROOTEXTRALIBDIRSED = "${@["${SYSROOTEXTRALIBDIRSED_OLD}",""][("${LIBTOOL_HAS_SYSROOT}" == "yes")]}"
diff --git a/classes/staging.bbclass b/classes/staging.bbclass
index 303f74c..3f4ff8c 100644
--- a/classes/staging.bbclass
+++ b/classes/staging.bbclass
@@ -42,20 +42,21 @@ SYSROOTEXTRALIBDIRSED ?= ""
sysroot_stage_libdir() {
src="$1"
dest="$2"
-
- olddir=`pwd`
- cd $src
- las=$(find . -name \*.la -type f)
- cd $olddir
- echo "Found la files: $las"
- for i in $las
- do
+ if [ "${LIBTOOL_HAS_SYSROOT}" = "no" ]; then
+ olddir=`pwd`
+ cd $src
+ las=$(find . -name \*.la -type f)
+ cd $olddir
+ echo "Found la files: $las"
+ for i in $las
+ do
sed -e 's/^installed=yes$/installed=no/' \
-e '/^dependency_libs=/s,${WORKDIR}[[:alnum:]/\._+-]*/\([[:alnum:]\._+-]*\),${STAGING_LIBDIR}/\1,g' \
-e "/^dependency_libs=/s,\([[:space:]']\)${libdir},\1${STAGING_LIBDIR},g" \
${SYSROOTEXTRALIBDIRSED} \
-i $src/$i
- done
+ done
+ fi
sysroot_stage_dir $src $dest
}
diff --git a/classes/utils.bbclass b/classes/utils.bbclass
index 61f3731..f7d6996 100644
--- a/classes/utils.bbclass
+++ b/classes/utils.bbclass
@@ -369,7 +369,7 @@ oe_libinstall() {
__runcmd install -m 0644 $dota $destpath/
fi
if [ -f "$dotlai" -a -n "$libtool" ]; then
- if test -n "$staging_install"
+ if [ -n "$staging_install" -a "${LIBTOOL_HAS_SYSROOT}" = "no" ]
then
# stop libtool using the final directory name for libraries
# in staging:
--
1.7.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH, V2 5/6] insane.bbclass: If LIBTOOL_HAS_SYSROOT is set then do not check for la insanity
2010-10-07 1:46 [PATCH,V2 0/6] libtool 2.4 upgrade Khem Raj
` (3 preceding siblings ...)
2010-10-07 1:46 ` [PATCH, V2 4/6] cross.bbclass, staging.bbclass, utils.bbclass: Make sure that .la munging is not done for libtool > 2.4 Khem Raj
@ 2010-10-07 1:46 ` Khem Raj
2010-10-07 1:46 ` [PATCH, V2 6/6] gnutls_2.10.1.bb: Update to libtools 2.4 macros Khem Raj
` (2 subsequent siblings)
7 siblings, 0 replies; 19+ messages in thread
From: Khem Raj @ 2010-10-07 1:46 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Khem Raj <raj.khem@gmail.com>
---
classes/insane.bbclass | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/classes/insane.bbclass b/classes/insane.bbclass
index 9087efd..677db27 100644
--- a/classes/insane.bbclass
+++ b/classes/insane.bbclass
@@ -342,7 +342,7 @@ def package_qa_check_staged(path,d):
if file.endswith(".la"):
file_content = open(path).read()
# Don't check installed status for native/cross packages
- if not iscrossnative:
+ if not iscrossnative and bb.data.getVar('LIBTOOL_HAS_SYSROOT', d, True) is "no":
if installed in file_content:
error_msg = "%s failed sanity test (installed) in path %s" % (file,root)
sane = package_qa_handle_error(5, error_msg, "staging", path, d)
--
1.7.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH, V2 6/6] gnutls_2.10.1.bb: Update to libtools 2.4 macros.
2010-10-07 1:46 [PATCH,V2 0/6] libtool 2.4 upgrade Khem Raj
` (4 preceding siblings ...)
2010-10-07 1:46 ` [PATCH, V2 5/6] insane.bbclass: If LIBTOOL_HAS_SYSROOT is set then do not check for la insanity Khem Raj
@ 2010-10-07 1:46 ` Khem Raj
2010-10-07 7:56 ` [PATCH,V2 0/6] libtool 2.4 upgrade Koen Kooi
2010-10-11 13:13 ` Koen Kooi
7 siblings, 0 replies; 19+ messages in thread
From: Khem Raj @ 2010-10-07 1:46 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Khem Raj <raj.khem@gmail.com>
---
recipes/gnutls/gnutls-2.10.1/libtool-update.patch |10965 +++++++++++++++++++++
recipes/gnutls/gnutls_2.10.1.bb | 3 +-
2 files changed, 10967 insertions(+), 1 deletions(-)
create mode 100644 recipes/gnutls/gnutls-2.10.1/libtool-update.patch
diff --git a/recipes/gnutls/gnutls-2.10.1/libtool-update.patch b/recipes/gnutls/gnutls-2.10.1/libtool-update.patch
new file mode 100644
index 0000000..04cbe72
--- /dev/null
+++ b/recipes/gnutls/gnutls-2.10.1/libtool-update.patch
@@ -0,0 +1,10965 @@
+Index: gnutls-2.10.1/lib/m4/ltoptions.m4
+===================================================================
+--- gnutls-2.10.1.orig/lib/m4/ltoptions.m4
++++ gnutls-2.10.1/lib/m4/ltoptions.m4
+@@ -1,13 +1,14 @@
+ # Helper functions for option handling. -*- Autoconf -*-
+ #
+-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
++# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
++# Inc.
+ # Written by Gary V. Vaughan, 2004
+ #
+ # This file is free software; the Free Software Foundation gives
+ # unlimited permission to copy and/or distribute it, with or without
+ # modifications, as long as this notice is preserved.
+
+-# serial 6 ltoptions.m4
++# serial 7 ltoptions.m4
+
+ # This is to help aclocal find these macros, as it can't see m4_define.
+ AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+@@ -125,7 +126,7 @@ LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+ [enable_win32_dll=yes
+
+ case $host in
+-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
++*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+@@ -133,13 +134,13 @@ case $host in
+ esac
+
+ test -z "$AS" && AS=as
+-_LT_DECL([], [AS], [0], [Assembler program])dnl
++_LT_DECL([], [AS], [1], [Assembler program])dnl
+
+ test -z "$DLLTOOL" && DLLTOOL=dlltool
+-_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
++_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+
+ test -z "$OBJDUMP" && OBJDUMP=objdump
+-_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
++_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+ ])# win32-dll
+
+ AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+Index: gnutls-2.10.1/lib/m4/ltversion.m4
+===================================================================
+--- gnutls-2.10.1.orig/lib/m4/ltversion.m4
++++ gnutls-2.10.1/lib/m4/ltversion.m4
+@@ -7,17 +7,17 @@
+ # unlimited permission to copy and/or distribute it, with or without
+ # modifications, as long as this notice is preserved.
+
+-# Generated from ltversion.in.
++# @configure_input@
+
+-# serial 3017 ltversion.m4
++# serial 3293 ltversion.m4
+ # This file is part of GNU Libtool
+
+-m4_define([LT_PACKAGE_VERSION], [2.2.6b])
+-m4_define([LT_PACKAGE_REVISION], [1.3017])
++m4_define([LT_PACKAGE_VERSION], [2.4])
++m4_define([LT_PACKAGE_REVISION], [1.3293])
+
+ AC_DEFUN([LTVERSION_VERSION],
+-[macro_version='2.2.6b'
+-macro_revision='1.3017'
++[macro_version='2.4'
++macro_revision='1.3293'
+ _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+ _LT_DECL(, macro_revision, 0)
+ ])
+Index: gnutls-2.10.1/lib/m4/lt~obsolete.m4
+===================================================================
+--- gnutls-2.10.1.orig/lib/m4/lt~obsolete.m4
++++ gnutls-2.10.1/lib/m4/lt~obsolete.m4
+@@ -1,13 +1,13 @@
+ # lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
+ #
+-# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
++# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+ # Written by Scott James Remnant, 2004.
+ #
+ # This file is free software; the Free Software Foundation gives
+ # unlimited permission to copy and/or distribute it, with or without
+ # modifications, as long as this notice is preserved.
+
+-# serial 4 lt~obsolete.m4
++# serial 5 lt~obsolete.m4
+
+ # These exist entirely to fool aclocal when bootstrapping libtool.
+ #
+@@ -77,7 +77,6 @@ m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC
+ m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
+ m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
+ m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
+-m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])])
+ m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+ m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+ m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+@@ -90,3 +89,10 @@ m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [
+ m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+ m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
+ m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
++m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
++m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
++m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
++m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
++m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
++m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
++m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
+Index: gnutls-2.10.1/libextra/m4/ltoptions.m4
+===================================================================
+--- gnutls-2.10.1.orig/libextra/m4/ltoptions.m4
++++ gnutls-2.10.1/libextra/m4/ltoptions.m4
+@@ -1,13 +1,14 @@
+ # Helper functions for option handling. -*- Autoconf -*-
+ #
+-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
++# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
++# Inc.
+ # Written by Gary V. Vaughan, 2004
+ #
+ # This file is free software; the Free Software Foundation gives
+ # unlimited permission to copy and/or distribute it, with or without
+ # modifications, as long as this notice is preserved.
+
+-# serial 6 ltoptions.m4
++# serial 7 ltoptions.m4
+
+ # This is to help aclocal find these macros, as it can't see m4_define.
+ AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+@@ -125,7 +126,7 @@ LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+ [enable_win32_dll=yes
+
+ case $host in
+-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
++*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+@@ -133,13 +134,13 @@ case $host in
+ esac
+
+ test -z "$AS" && AS=as
+-_LT_DECL([], [AS], [0], [Assembler program])dnl
++_LT_DECL([], [AS], [1], [Assembler program])dnl
+
+ test -z "$DLLTOOL" && DLLTOOL=dlltool
+-_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
++_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+
+ test -z "$OBJDUMP" && OBJDUMP=objdump
+-_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
++_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+ ])# win32-dll
+
+ AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+Index: gnutls-2.10.1/libextra/m4/ltversion.m4
+===================================================================
+--- gnutls-2.10.1.orig/libextra/m4/ltversion.m4
++++ gnutls-2.10.1/libextra/m4/ltversion.m4
+@@ -7,17 +7,17 @@
+ # unlimited permission to copy and/or distribute it, with or without
+ # modifications, as long as this notice is preserved.
+
+-# Generated from ltversion.in.
++# @configure_input@
+
+-# serial 3017 ltversion.m4
++# serial 3293 ltversion.m4
+ # This file is part of GNU Libtool
+
+-m4_define([LT_PACKAGE_VERSION], [2.2.6b])
+-m4_define([LT_PACKAGE_REVISION], [1.3017])
++m4_define([LT_PACKAGE_VERSION], [2.4])
++m4_define([LT_PACKAGE_REVISION], [1.3293])
+
+ AC_DEFUN([LTVERSION_VERSION],
+-[macro_version='2.2.6b'
+-macro_revision='1.3017'
++[macro_version='2.4'
++macro_revision='1.3293'
+ _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+ _LT_DECL(, macro_revision, 0)
+ ])
+Index: gnutls-2.10.1/libextra/m4/lt~obsolete.m4
+===================================================================
+--- gnutls-2.10.1.orig/libextra/m4/lt~obsolete.m4
++++ gnutls-2.10.1/libextra/m4/lt~obsolete.m4
+@@ -1,13 +1,13 @@
+ # lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
+ #
+-# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
++# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+ # Written by Scott James Remnant, 2004.
+ #
+ # This file is free software; the Free Software Foundation gives
+ # unlimited permission to copy and/or distribute it, with or without
+ # modifications, as long as this notice is preserved.
+
+-# serial 4 lt~obsolete.m4
++# serial 5 lt~obsolete.m4
+
+ # These exist entirely to fool aclocal when bootstrapping libtool.
+ #
+@@ -77,7 +77,6 @@ m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC
+ m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
+ m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
+ m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
+-m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])])
+ m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+ m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+ m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+@@ -90,3 +89,10 @@ m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [
+ m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+ m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
+ m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
++m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
++m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
++m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
++m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
++m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
++m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
++m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
+Index: gnutls-2.10.1/m4/ltoptions.m4
+===================================================================
+--- gnutls-2.10.1.orig/m4/ltoptions.m4
++++ gnutls-2.10.1/m4/ltoptions.m4
+@@ -1,13 +1,14 @@
+ # Helper functions for option handling. -*- Autoconf -*-
+ #
+-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
++# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
++# Inc.
+ # Written by Gary V. Vaughan, 2004
+ #
+ # This file is free software; the Free Software Foundation gives
+ # unlimited permission to copy and/or distribute it, with or without
+ # modifications, as long as this notice is preserved.
+
+-# serial 6 ltoptions.m4
++# serial 7 ltoptions.m4
+
+ # This is to help aclocal find these macros, as it can't see m4_define.
+ AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+@@ -125,7 +126,7 @@ LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+ [enable_win32_dll=yes
+
+ case $host in
+-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
++*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+@@ -133,13 +134,13 @@ case $host in
+ esac
+
+ test -z "$AS" && AS=as
+-_LT_DECL([], [AS], [0], [Assembler program])dnl
++_LT_DECL([], [AS], [1], [Assembler program])dnl
+
+ test -z "$DLLTOOL" && DLLTOOL=dlltool
+-_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
++_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+
+ test -z "$OBJDUMP" && OBJDUMP=objdump
+-_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
++_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+ ])# win32-dll
+
+ AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+Index: gnutls-2.10.1/m4/ltversion.m4
+===================================================================
+--- gnutls-2.10.1.orig/m4/ltversion.m4
++++ gnutls-2.10.1/m4/ltversion.m4
+@@ -7,17 +7,17 @@
+ # unlimited permission to copy and/or distribute it, with or without
+ # modifications, as long as this notice is preserved.
+
+-# Generated from ltversion.in.
++# @configure_input@
+
+-# serial 3017 ltversion.m4
++# serial 3293 ltversion.m4
+ # This file is part of GNU Libtool
+
+-m4_define([LT_PACKAGE_VERSION], [2.2.6b])
+-m4_define([LT_PACKAGE_REVISION], [1.3017])
++m4_define([LT_PACKAGE_VERSION], [2.4])
++m4_define([LT_PACKAGE_REVISION], [1.3293])
+
+ AC_DEFUN([LTVERSION_VERSION],
+-[macro_version='2.2.6b'
+-macro_revision='1.3017'
++[macro_version='2.4'
++macro_revision='1.3293'
+ _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+ _LT_DECL(, macro_revision, 0)
+ ])
+Index: gnutls-2.10.1/m4/lt~obsolete.m4
+===================================================================
+--- gnutls-2.10.1.orig/m4/lt~obsolete.m4
++++ gnutls-2.10.1/m4/lt~obsolete.m4
+@@ -1,13 +1,13 @@
+ # lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
+ #
+-# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
++# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+ # Written by Scott James Remnant, 2004.
+ #
+ # This file is free software; the Free Software Foundation gives
+ # unlimited permission to copy and/or distribute it, with or without
+ # modifications, as long as this notice is preserved.
+
+-# serial 4 lt~obsolete.m4
++# serial 5 lt~obsolete.m4
+
+ # These exist entirely to fool aclocal when bootstrapping libtool.
+ #
+@@ -77,7 +77,6 @@ m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC
+ m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
+ m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
+ m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
+-m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])])
+ m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+ m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+ m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+@@ -90,3 +89,10 @@ m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [
+ m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+ m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
+ m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
++m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
++m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
++m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
++m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
++m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
++m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
++m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
+Index: gnutls-2.10.1/lib/m4/libtool.m4
+===================================================================
+--- gnutls-2.10.1.orig/lib/m4/libtool.m4
++++ gnutls-2.10.1/lib/m4/libtool.m4
+@@ -1,7 +1,8 @@
+ # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+ #
+ # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-# 2006, 2007, 2008 Free Software Foundation, Inc.
++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
++# Inc.
+ # Written by Gordon Matzigkeit, 1996
+ #
+ # This file is free software; the Free Software Foundation gives
+@@ -10,7 +11,8 @@
+
+ m4_define([_LT_COPYING], [dnl
+ # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-# 2006, 2007, 2008 Free Software Foundation, Inc.
++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
++# Inc.
+ # Written by Gordon Matzigkeit, 1996
+ #
+ # This file is part of GNU Libtool.
+@@ -37,7 +39,7 @@ m4_define([_LT_COPYING], [dnl
+ # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ ])
+
+-# serial 56 LT_INIT
++# serial 57 LT_INIT
+
+
+ # LT_PREREQ(VERSION)
+@@ -66,6 +68,7 @@ esac
+ # ------------------
+ AC_DEFUN([LT_INIT],
+ [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
++AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+ AC_BEFORE([$0], [LT_LANG])dnl
+ AC_BEFORE([$0], [LT_OUTPUT])dnl
+ AC_BEFORE([$0], [LTDL_INIT])dnl
+@@ -82,6 +85,8 @@ AC_REQUIRE([LTVERSION_VERSION])dnl
+ AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+ m4_require([_LT_PROG_LTMAIN])dnl
+
++_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
++
+ dnl Parse OPTIONS
+ _LT_SET_OPTIONS([$0], [$1])
+
+@@ -89,7 +94,8 @@ _LT_SET_OPTIONS([$0], [$1])
+ LIBTOOL_DEPS="$ltmain"
+
+ # Always use our own libtool.
+-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++LIBTOOL='$(SHELL) $(top_builddir)'
++LIBTOOL="$LIBTOOL/${host_alias}-libtool"
+ AC_SUBST(LIBTOOL)dnl
+
+ _LT_SETUP
+@@ -118,7 +124,7 @@ m4_defun([_LT_CC_BASENAME],
+ *) break;;
+ esac
+ done
+-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+ ])
+
+
+@@ -138,6 +144,9 @@ m4_defun([_LT_FILEUTILS_DEFAULTS],
+ m4_defun([_LT_SETUP],
+ [AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
++AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
++
+ _LT_DECL([], [host_alias], [0], [The host system])dnl
+ _LT_DECL([], [host], [0])dnl
+ _LT_DECL([], [host_os], [0])dnl
+@@ -160,10 +169,13 @@ _LT_DECL([], [exeext], [0], [Executable
+ dnl
+ m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_CHECK_SHELL_FEATURES])dnl
++m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+ m4_require([_LT_CMD_RELOAD])dnl
+ m4_require([_LT_CHECK_MAGIC_METHOD])dnl
++m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+ m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+ m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
++m4_require([_LT_WITH_SYSROOT])dnl
+
+ _LT_CONFIG_LIBTOOL_INIT([
+ # See if we are running on zsh, and set the options which allow our
+@@ -179,7 +191,6 @@ fi
+ _LT_CHECK_OBJDIR
+
+ m4_require([_LT_TAG_COMPILER])dnl
+-_LT_PROG_ECHO_BACKSLASH
+
+ case $host_os in
+ aix3*)
+@@ -193,25 +204,8 @@ aix3*)
+ ;;
+ esac
+
+-# Sed substitution that helps us do robust quoting. It backslashifies
+-# metacharacters that are still active within double-quoted strings.
+-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+-
+-# Same as above, but do not quote variable references.
+-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+-
+-# Sed substitution to delay expansion of an escaped shell variable in a
+-# double_quote_subst'ed string.
+-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+-
+-# Sed substitution to delay expansion of an escaped single quote.
+-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+-
+-# Sed substitution to avoid accidental globbing in evaled expressions
+-no_glob_subst='s/\*/\\\*/g'
+-
+ # Global variables:
+-ofile=libtool
++ofile=${host_alias}-libtool
+ can_build_shared=yes
+
+ # All known linkers require a `.a' archive for static linking (except MSVC,
+@@ -250,6 +244,28 @@ _LT_CONFIG_COMMANDS
+ ])# _LT_SETUP
+
+
++# _LT_PREPARE_SED_QUOTE_VARS
++# --------------------------
++# Define a few sed substitution that help us do robust quoting.
++m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
++[# Backslashify metacharacters that are still active within
++# double-quoted strings.
++sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
++
++# Same as above, but do not quote variable references.
++double_quote_subst='s/\([["`\\]]\)/\\\1/g'
++
++# Sed substitution to delay expansion of an escaped shell variable in a
++# double_quote_subst'ed string.
++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
++
++# Sed substitution to delay expansion of an escaped single quote.
++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
++
++# Sed substitution to avoid accidental globbing in evaled expressions
++no_glob_subst='s/\*/\\\*/g'
++])
++
+ # _LT_PROG_LTMAIN
+ # ---------------
+ # Note that this code is called both from `configure', and `config.status'
+@@ -408,7 +424,7 @@ m4_define([_lt_decl_all_varnames],
+ # declaration there will have the same value as in `configure'. VARNAME
+ # must have a single quote delimited value for this to work.
+ m4_define([_LT_CONFIG_STATUS_DECLARE],
+-[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
++[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+
+
+ # _LT_CONFIG_STATUS_DECLARATIONS
+@@ -418,7 +434,7 @@ m4_define([_LT_CONFIG_STATUS_DECLARE],
+ # embedded single quotes properly. In configure, this macro expands
+ # each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+ #
+-# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
++# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+ m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+ [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+@@ -517,12 +533,20 @@ LTCC='$LTCC'
+ LTCFLAGS='$LTCFLAGS'
+ compiler='$compiler_DEFAULT'
+
++# A function that is used when there is no print builtin or printf.
++func_fallback_echo ()
++{
++ eval 'cat <<_LTECHO_EOF
++\$[]1
++_LTECHO_EOF'
++}
++
+ # Quote evaled strings.
+ for var in lt_decl_all_varnames([[ \
+ ]], lt_decl_quote_varnames); do
+- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
++ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+@@ -533,9 +557,9 @@ done
+ # Double-quote double-evaled strings.
+ for var in lt_decl_all_varnames([[ \
+ ]], lt_decl_dquote_varnames); do
+- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
++ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+@@ -543,16 +567,38 @@ for var in lt_decl_all_varnames([[ \
+ esac
+ done
+
+-# Fix-up fallback echo if it was mangled by the above quoting rules.
+-case \$lt_ECHO in
+-*'\\\[$]0 --fallback-echo"')dnl "
+- lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+- ;;
+-esac
+-
+ _LT_OUTPUT_LIBTOOL_INIT
+ ])
+
++# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
++# ------------------------------------
++# Generate a child script FILE with all initialization necessary to
++# reuse the environment learned by the parent script, and make the
++# file executable. If COMMENT is supplied, it is inserted after the
++# `#!' sequence but before initialization text begins. After this
++# macro, additional text can be appended to FILE to form the body of
++# the child script. The macro ends with non-zero status if the
++# file could not be fully written (such as if the disk is full).
++m4_ifdef([AS_INIT_GENERATED],
++[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
++[m4_defun([_LT_GENERATED_FILE_INIT],
++[m4_require([AS_PREPARE])]dnl
++[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
++[lt_write_fail=0
++cat >$1 <<_ASEOF || lt_write_fail=1
++#! $SHELL
++# Generated by $as_me.
++$2
++SHELL=\${CONFIG_SHELL-$SHELL}
++export SHELL
++_ASEOF
++cat >>$1 <<\_ASEOF || lt_write_fail=1
++AS_SHELL_SANITIZE
++_AS_PREPARE
++exec AS_MESSAGE_FD>&1
++_ASEOF
++test $lt_write_fail = 0 && chmod +x $1[]dnl
++m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
+
+ # LT_OUTPUT
+ # ---------
+@@ -562,20 +608,11 @@ _LT_OUTPUT_LIBTOOL_INIT
+ AC_DEFUN([LT_OUTPUT],
+ [: ${CONFIG_LT=./config.lt}
+ AC_MSG_NOTICE([creating $CONFIG_LT])
+-cat >"$CONFIG_LT" <<_LTEOF
+-#! $SHELL
+-# Generated by $as_me.
+-# Run this file to recreate a libtool stub with the current configuration.
+-
+-lt_cl_silent=false
+-SHELL=\${CONFIG_SHELL-$SHELL}
+-_LTEOF
++_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
++[# Run this file to recreate a libtool stub with the current configuration.])
+
+ cat >>"$CONFIG_LT" <<\_LTEOF
+-AS_SHELL_SANITIZE
+-_AS_PREPARE
+-
+-exec AS_MESSAGE_FD>&1
++lt_cl_silent=false
+ exec AS_MESSAGE_LOG_FD>>config.log
+ {
+ echo
+@@ -601,7 +638,7 @@ m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_
+ m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+ configured by $[0], generated by m4_PACKAGE_STRING.
+
+-Copyright (C) 2008 Free Software Foundation, Inc.
++Copyright (C) 2010 Free Software Foundation, Inc.
+ This config.lt script is free software; the Free Software Foundation
+ gives unlimited permision to copy, distribute and modify it."
+
+@@ -646,15 +683,13 @@ chmod +x "$CONFIG_LT"
+ # appending to config.log, which fails on DOS, as config.log is still kept
+ # open by configure. Here we exec the FD to /dev/null, effectively closing
+ # config.log, so it can be properly (re)opened and appended to by config.lt.
+-if test "$no_create" != yes; then
+- lt_cl_success=:
+- test "$silent" = yes &&
+- lt_config_lt_args="$lt_config_lt_args --quiet"
+- exec AS_MESSAGE_LOG_FD>/dev/null
+- $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+- exec AS_MESSAGE_LOG_FD>>config.log
+- $lt_cl_success || AS_EXIT(1)
+-fi
++lt_cl_success=:
++test "$silent" = yes &&
++ lt_config_lt_args="$lt_config_lt_args --quiet"
++exec AS_MESSAGE_LOG_FD>/dev/null
++$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
++exec AS_MESSAGE_LOG_FD>>config.log
++$lt_cl_success || AS_EXIT(1)
+ ])# LT_OUTPUT
+
+
+@@ -717,15 +752,12 @@ _LT_EOF
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
++ sed '$q' "$ltmain" >> "$cfgfile" \
++ || (rm -f "$cfgfile"; exit 1)
+
+- _LT_PROG_XSI_SHELLFNS
++ _LT_PROG_REPLACE_SHELLFNS
+
+- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
+-
+- mv -f "$cfgfile" "$ofile" ||
++ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+ ],
+@@ -831,11 +863,13 @@ AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)
+ AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+ AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+ AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
++AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
+ dnl aclocal-1.4 backwards compatibility:
+ dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+ dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+ dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+ dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
++dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+
+
+ # _LT_TAG_COMPILER
+@@ -940,6 +974,31 @@ m4_defun_once([_LT_REQUIRED_DARWIN_CHECK
+ [lt_cv_ld_exported_symbols_list=no])
+ LDFLAGS="$save_LDFLAGS"
+ ])
++ AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
++ [lt_cv_ld_force_load=no
++ cat > conftest.c << _LT_EOF
++int forced_loaded() { return 2;}
++_LT_EOF
++ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
++ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
++ echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
++ $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
++ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
++ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
++ cat > conftest.c << _LT_EOF
++int main() { return 0;}
++_LT_EOF
++ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
++ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
++ _lt_result=$?
++ if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
++ lt_cv_ld_force_load=yes
++ else
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ fi
++ rm -f conftest.err libconftest.a conftest conftest.c
++ rm -rf conftest.dSYM
++ ])
+ case $host_os in
+ rhapsody* | darwin1.[[012]])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+@@ -967,7 +1026,7 @@ m4_defun_once([_LT_REQUIRED_DARWIN_CHECK
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+- if test "$DSYMUTIL" != ":"; then
++ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+@@ -987,7 +1046,11 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=''
++ if test "$lt_cv_ld_force_load" = "yes"; then
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
++ else
++ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
++ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ case $cc_basename in
+@@ -995,7 +1058,7 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+- output_verbose_link_cmd=echo
++ output_verbose_link_cmd=func_echo_all
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+@@ -1011,203 +1074,142 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
+ fi
+ ])
+
+-# _LT_SYS_MODULE_PATH_AIX
+-# -----------------------
++# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
++# ----------------------------------
+ # Links a minimal program and checks the executable
+ # for the system default hardcoded library path. In most cases,
+ # this is /usr/lib:/lib, but when the MPI compilers are used
+ # the location of the communication and MPI libs are included too.
+ # If we don't find anything, use the default library path according
+ # to the aix ld manual.
++# Store the results from the different compilers for each TAGNAME.
++# Allow to override them for all tags through lt_cv_aix_libpath.
+ m4_defun([_LT_SYS_MODULE_PATH_AIX],
+ [m4_require([_LT_DECL_SED])dnl
+-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi],[])
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++if test "${lt_cv_aix_libpath+set}" = set; then
++ aix_libpath=$lt_cv_aix_libpath
++else
++ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
++ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
++ lt_aix_libpath_sed='[
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\([^ ]*\) *$/\1/
++ p
++ }
++ }]'
++ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ # Check for a 64-bit object if we didn't find anything.
++ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
++ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ fi],[])
++ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
++ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
++ fi
++ ])
++ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
++fi
+ ])# _LT_SYS_MODULE_PATH_AIX
+
+
+ # _LT_SHELL_INIT(ARG)
+ # -------------------
+ m4_define([_LT_SHELL_INIT],
+-[ifdef([AC_DIVERSION_NOTICE],
+- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+- [AC_DIVERT_PUSH(NOTICE)])
+-$1
+-AC_DIVERT_POP
+-])# _LT_SHELL_INIT
++[m4_divert_text([M4SH-INIT], [$1
++])])# _LT_SHELL_INIT
++
+
+
+ # _LT_PROG_ECHO_BACKSLASH
+ # -----------------------
+-# Add some code to the start of the generated configure script which
+-# will find an echo command which doesn't interpret backslashes.
++# Find how we can fake an echo command that does not interpret backslash.
++# In particular, with Autoconf 2.60 or later we add some code to the start
++# of the generated configure script which will find a shell with a builtin
++# printf (which we can use as an echo command).
+ m4_defun([_LT_PROG_ECHO_BACKSLASH],
+-[_LT_SHELL_INIT([
+-# Check that we are running under the correct shell.
+-SHELL=${CONFIG_SHELL-/bin/sh}
+-
+-case X$lt_ECHO in
+-X*--fallback-echo)
+- # Remove one level of quotation (which was required for Make).
+- ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+- ;;
+-esac
+-
+-ECHO=${lt_ECHO-echo}
+-if test "X[$]1" = X--no-reexec; then
+- # Discard the --no-reexec flag, and continue.
+- shift
+-elif test "X[$]1" = X--fallback-echo; then
+- # Avoid inline document here, it may be left over
+- :
+-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+- # Yippee, $ECHO works!
+- :
++[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
++ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
++
++AC_MSG_CHECKING([how to print strings])
++# Test print first, because it will be a builtin if present.
++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
++ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
++ ECHO='print -r --'
++elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
++ ECHO='printf %s\n'
+ else
+- # Restart under the correct shell.
+- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+-fi
+-
+-if test "X[$]1" = X--fallback-echo; then
+- # used as fallback echo
+- shift
+- cat <<_LT_EOF
+-[$]*
+-_LT_EOF
+- exit 0
++ # Use this function as a fallback that always works.
++ func_fallback_echo ()
++ {
++ eval 'cat <<_LTECHO_EOF
++$[]1
++_LTECHO_EOF'
++ }
++ ECHO='func_fallback_echo'
+ fi
+
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+-
+-if test -z "$lt_ECHO"; then
+- if test "X${echo_test_string+set}" != Xset; then
+- # find a string as large as possible, as long as the shell can cope with it
+- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+- if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+- { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+- then
+- break
+- fi
+- done
+- fi
+-
+- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- :
+- else
+- # The Solaris, AIX, and Digital Unix default echo programs unquote
+- # backslashes. This makes it impossible to quote backslashes using
+- # echo "$something" | sed 's/\\/\\\\/g'
+- #
+- # So, first we look for a working echo in the user's PATH.
+-
+- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+- for dir in $PATH /usr/ucb; do
+- IFS="$lt_save_ifs"
+- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- ECHO="$dir/echo"
+- break
+- fi
+- done
+- IFS="$lt_save_ifs"
+-
+- if test "X$ECHO" = Xecho; then
+- # We didn't find a better echo, so look for alternatives.
+- if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- # This shell has a builtin print -r that does the trick.
+- ECHO='print -r'
+- elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+- test "X$CONFIG_SHELL" != X/bin/ksh; then
+- # If we have ksh, try running configure again with it.
+- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+- export ORIGINAL_CONFIG_SHELL
+- CONFIG_SHELL=/bin/ksh
+- export CONFIG_SHELL
+- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+- else
+- # Try using printf.
+- ECHO='printf %s\n'
+- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- # Cool, printf works
+- :
+- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+- test "X$echo_testing_string" = 'X\t' &&
+- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+- export CONFIG_SHELL
+- SHELL="$CONFIG_SHELL"
+- export SHELL
+- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+- test "X$echo_testing_string" = 'X\t' &&
+- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+- else
+- # maybe with a smaller string...
+- prev=:
+-
+- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+- if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+- then
+- break
+- fi
+- prev="$cmd"
+- done
++# func_echo_all arg...
++# Invoke $ECHO with all args, space-separated.
++func_echo_all ()
++{
++ $ECHO "$*"
++}
+
+- if test "$prev" != 'sed 50q "[$]0"'; then
+- echo_test_string=`eval $prev`
+- export echo_test_string
+- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+- else
+- # Oops. We lost completely, so just stick with echo.
+- ECHO=echo
+- fi
+- fi
+- fi
+- fi
+- fi
+-fi
++case "$ECHO" in
++ printf*) AC_MSG_RESULT([printf]) ;;
++ print*) AC_MSG_RESULT([print -r]) ;;
++ *) AC_MSG_RESULT([cat]) ;;
++esac
+
+-# Copy echo and quote the copy suitably for passing to libtool from
+-# the Makefile, instead of quoting the original, which is used later.
+-lt_ECHO=$ECHO
+-if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+- lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+-fi
++m4_ifdef([_AS_DETECT_SUGGESTED],
++[_AS_DETECT_SUGGESTED([
++ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
++ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
++ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
++ PATH=/empty FPATH=/empty; export PATH FPATH
++ test "X`printf %s $ECHO`" = "X$ECHO" \
++ || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+
+-AC_SUBST(lt_ECHO)
+-])
+ _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+-_LT_DECL([], [ECHO], [1],
+- [An echo program that does not interpret backslashes])
++_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+ ])# _LT_PROG_ECHO_BACKSLASH
+
+
++# _LT_WITH_SYSROOT
++# ----------------
++AC_DEFUN([_LT_WITH_SYSROOT],
++[AC_MSG_CHECKING([for sysroot])
++AC_ARG_WITH([sysroot],
++[ --with-sysroot[=DIR] Search for dependent libraries within DIR
++ (or the compiler's sysroot if not specified).],
++[], [with_sysroot=no])
++
++dnl lt_sysroot will always be passed unquoted. We quote it here
++dnl in case the user passed a directory name.
++lt_sysroot=
++case ${with_sysroot} in #(
++ yes)
++ if test "$GCC" = yes; then
++ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
++ fi
++ ;; #(
++ /*)
++ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
++ ;; #(
++ no|'')
++ ;; #(
++ *)
++ AC_MSG_RESULT([${with_sysroot}])
++ AC_MSG_ERROR([The sysroot must be an absolute path.])
++ ;;
++esac
++
++ AC_MSG_RESULT([${lt_sysroot:-no}])
++_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
++[dependent libraries, and in which our libraries should be installed.])])
++
+ # _LT_ENABLE_LOCK
+ # ---------------
+ m4_defun([_LT_ENABLE_LOCK],
+@@ -1236,7 +1238,7 @@ ia64-*-hpux*)
+ ;;
+ *-*-irix6*)
+ # Find out which ABI we are using.
+- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
++ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+@@ -1354,14 +1356,47 @@ need_locks="$enable_libtool_lock"
+ ])# _LT_ENABLE_LOCK
+
+
++# _LT_PROG_AR
++# -----------
++m4_defun([_LT_PROG_AR],
++[AC_CHECK_TOOLS(AR, [ar], false)
++: ${AR=ar}
++: ${AR_FLAGS=cru}
++_LT_DECL([], [AR], [1], [The archiver])
++_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
++
++AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
++ [lt_cv_ar_at_file=no
++ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
++ [echo conftest.$ac_objext > conftest.lst
++ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
++ AC_TRY_EVAL([lt_ar_try])
++ if test "$ac_status" -eq 0; then
++ # Ensure the archiver fails upon bogus file names.
++ rm -f conftest.$ac_objext libconftest.a
++ AC_TRY_EVAL([lt_ar_try])
++ if test "$ac_status" -ne 0; then
++ lt_cv_ar_at_file=@
++ fi
++ fi
++ rm -f conftest.* libconftest.a
++ ])
++ ])
++
++if test "x$lt_cv_ar_at_file" = xno; then
++ archiver_list_spec=
++else
++ archiver_list_spec=$lt_cv_ar_at_file
++fi
++_LT_DECL([], [archiver_list_spec], [1],
++ [How to feed a file listing to the archiver])
++])# _LT_PROG_AR
++
++
+ # _LT_CMD_OLD_ARCHIVE
+ # -------------------
+ m4_defun([_LT_CMD_OLD_ARCHIVE],
+-[AC_CHECK_TOOL(AR, ar, false)
+-test -z "$AR" && AR=ar
+-test -z "$AR_FLAGS" && AR_FLAGS=cru
+-_LT_DECL([], [AR], [1], [The archiver])
+-_LT_DECL([], [AR_FLAGS], [1])
++[_LT_PROG_AR
+
+ AC_CHECK_TOOL(STRIP, strip, :)
+ test -z "$STRIP" && STRIP=:
+@@ -1388,10 +1423,19 @@ if test -n "$RANLIB"; then
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+ fi
++
++case $host_os in
++ darwin*)
++ lock_old_archive_extraction=yes ;;
++ *)
++ lock_old_archive_extraction=no ;;
++esac
+ _LT_DECL([], [old_postinstall_cmds], [2])
+ _LT_DECL([], [old_postuninstall_cmds], [2])
+ _LT_TAGDECL([], [old_archive_cmds], [2],
+ [Commands used to build an old-style archive])
++_LT_DECL([], [lock_old_archive_extraction], [0],
++ [Whether to use a lock for old archive extraction])
+ ])# _LT_CMD_OLD_ARCHIVE
+
+
+@@ -1416,15 +1460,15 @@ AC_CACHE_CHECK([$1], [$2],
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+@@ -1464,7 +1508,7 @@ AC_CACHE_CHECK([$1], [$2],
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&AS_MESSAGE_LOG_FD
+- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
++ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+@@ -1527,6 +1571,11 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [d
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
++ mint*)
++ # On MiNT this can take a long time and run out of memory.
++ lt_cv_sys_max_cmd_len=8192;
++ ;;
++
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+@@ -1591,8 +1640,8 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [d
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+- while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+- = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
++ while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
++ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+@@ -1643,7 +1692,7 @@ else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+-[#line __oline__ "configure"
++[#line $LINENO "configure"
+ #include "confdefs.h"
+
+ #if HAVE_DLFCN_H
+@@ -1684,7 +1733,13 @@ else
+ # endif
+ #endif
+
+-void fnord() { int i=42;}
++/* When -fvisbility=hidden is used, assume the code has been annotated
++ correspondingly for the symbols needed. */
++#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
++int fnord () __attribute__((visibility("default")));
++#endif
++
++int fnord () { return 42; }
+ int main ()
+ {
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+@@ -1693,7 +1748,11 @@ int main ()
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++ else
++ {
++ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++ else puts (dlerror ());
++ }
+ /* dlclose (self); */
+ }
+ else
+@@ -1869,16 +1928,16 @@ AC_CACHE_CHECK([if $compiler supports -c
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&AS_MESSAGE_LOG_FD
+- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
++ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+@@ -2037,6 +2096,7 @@ m4_require([_LT_DECL_EGREP])dnl
+ m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_DECL_OBJDUMP])dnl
+ m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+ AC_MSG_CHECKING([dynamic linker characteristics])
+ m4_if([$1],
+ [], [
+@@ -2045,16 +2105,23 @@ if test "$GCC" = yes; then
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+- if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
++ case $host_os in
++ mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
++ *) lt_sed_strip_eq="s,=/,/,g" ;;
++ esac
++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
++ case $lt_search_path_spec in
++ *\;*)
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+- else
+- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+- fi
++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
++ ;;
++ *)
++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
++ ;;
++ esac
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+@@ -2067,7 +2134,7 @@ if test "$GCC" = yes; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+- lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
++ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+ BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+@@ -2087,7 +2154,13 @@ BEGIN {RS=" "; FS="/|\n";} {
+ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+ }'`
+- sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
++ # AWK program above erroneously prepends '/' to C:/dos/paths
++ # for these hosts.
++ case $host_os in
++ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
++ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
++ esac
++ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+ else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ fi])
+@@ -2175,7 +2248,7 @@ amigaos*)
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+@@ -2206,8 +2279,9 @@ cygwin* | mingw* | pw32* | cegcc*)
+ need_version=no
+ need_lib_prefix=no
+
+- case $GCC,$host_os in
+- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
++ case $GCC,$cc_basename in
++ yes,*)
++ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+@@ -2228,36 +2302,83 @@ cygwin* | mingw* | pw32* | cegcc*)
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
++m4_if([$1], [],[
++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+- if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+- # It is most probably a Windows format PATH printed by
+- # mingw gcc, but we are running on Cygwin. Gcc prints its search
+- # path with ; separators, and with drive letters. We can handle the
+- # drive letters (cygwin fileutils understands them), so leave them,
+- # especially as we might pass files found there to a mingw objdump,
+- # which wouldn't understand a cygwinified path. Ahh.
+- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+- else
+- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+- fi
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
++ dynamic_linker='Win32 ld.exe'
++ ;;
++
++ *,cl*)
++ # Native MSVC
++ libname_spec='$name'
++ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++ library_names_spec='${libname}.dll.lib'
++
++ case $build_os in
++ mingw*)
++ sys_lib_search_path_spec=
++ lt_save_ifs=$IFS
++ IFS=';'
++ for lt_path in $LIB
++ do
++ IFS=$lt_save_ifs
++ # Let DOS variable expansion print the short 8.3 style file name.
++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
++ done
++ IFS=$lt_save_ifs
++ # Convert to MSYS style.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
++ ;;
++ cygwin*)
++ # Convert to unix form, then to dos form, then back to unix form
++ # but this time dos style (no spaces!) so that the unix form looks
++ # like /cygdrive/c/PROGRA~1:/cygdr...
++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ ;;
++ *)
++ sys_lib_search_path_spec="$LIB"
++ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
++ # It is most probably a Windows format PATH.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++ else
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ fi
++ # FIXME: find the short name or the path components, as spaces are
++ # common. (e.g. "Program Files" -> "PROGRA~1")
++ ;;
++ esac
++
++ # DLL is installed to $(libdir)/../bin by postinstall_cmds
++ postinstall_cmds='base_file=`basename \${file}`~
++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++ dldir=$destdir/`dirname \$dlpath`~
++ test -d \$dldir || mkdir -p \$dldir~
++ $install_prog $dir/$dlname \$dldir/$dlname'
++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++ dlpath=$dir/\$dldll~
++ $RM \$dlpath'
++ shlibpath_overrides_runpath=yes
++ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
++ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
++ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+- dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+@@ -2344,6 +2465,19 @@ gnu*)
+ hardcode_into_libs=yes
+ ;;
+
++haiku*)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ dynamic_linker="$host_os runtime_loader"
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
++ hardcode_into_libs=yes
++ ;;
++
+ hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+@@ -2386,8 +2520,10 @@ hpux9* | hpux10* | hpux11*)
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+- # HP-UX runs *really* slowly unless shared libraries are mode 555.
++ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
++ # or fails outright, so override atomically:
++ install_override_mode=555
+ ;;
+
+ interix[[3-9]]*)
+@@ -2454,16 +2590,21 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
++
+ # Some binutils ld are patched to set DT_RUNPATH
+- save_LDFLAGS=$LDFLAGS
+- save_libdir=$libdir
+- eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+- LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+- [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+- [shlibpath_overrides_runpath=yes])])
+- LDFLAGS=$save_LDFLAGS
+- libdir=$save_libdir
++ AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
++ [lt_cv_shlibpath_overrides_runpath=no
++ save_LDFLAGS=$LDFLAGS
++ save_libdir=$libdir
++ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
++ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
++ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
++ [lt_cv_shlibpath_overrides_runpath=yes])])
++ LDFLAGS=$save_LDFLAGS
++ libdir=$save_libdir
++ ])
++ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+@@ -2472,7 +2613,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+@@ -2485,18 +2626,6 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+-netbsdelf*-gnu)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=no
+- hardcode_into_libs=yes
+- dynamic_linker='NetBSD ld.elf_so'
+- ;;
+-
+ netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+@@ -2717,6 +2846,8 @@ _LT_DECL([], [library_names_spec], [1],
+ The last name is the one that the linker finds with -lNAME]])
+ _LT_DECL([], [soname_spec], [1],
+ [[The coded name of the library, if different from the real name]])
++_LT_DECL([], [install_override_mode], [1],
++ [Permission mode override for installation of shared libraries])
+ _LT_DECL([], [postinstall_cmds], [2],
+ [Command to use after installation of a shared archive])
+ _LT_DECL([], [postuninstall_cmds], [2],
+@@ -2829,6 +2960,7 @@ AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ m4_require([_LT_DECL_SED])dnl
+ m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
+
+ AC_ARG_WITH([gnu-ld],
+ [AS_HELP_STRING([--with-gnu-ld],
+@@ -2950,6 +3082,11 @@ case $reload_flag in
+ esac
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ case $host_os in
++ cygwin* | mingw* | pw32* | cegcc*)
++ if test "$GCC" != yes; then
++ reload_cmds=false
++ fi
++ ;;
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+@@ -2958,8 +3095,8 @@ case $host_os in
+ fi
+ ;;
+ esac
+-_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+-_LT_DECL([], [reload_cmds], [2])dnl
++_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
++_LT_TAGDECL([], [reload_cmds], [2])dnl
+ ])# _LT_CMD_RELOAD
+
+
+@@ -3011,16 +3148,18 @@ mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+- if ( file / ) >/dev/null 2>&1; then
++ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
++ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
++ # Keep this pattern in sync with the one in func_win32_libid.
++ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+-cegcc)
++cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+@@ -3050,6 +3189,10 @@ gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
++haiku*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
+ hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+@@ -3058,11 +3201,11 @@ hpux10.20* | hpux11*)
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
++ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+@@ -3088,7 +3231,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+-netbsd* | netbsdelf*-gnu)
++netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ else
+@@ -3162,6 +3305,21 @@ tpf*)
+ ;;
+ esac
+ ])
++
++file_magic_glob=
++want_nocaseglob=no
++if test "$build" = "$host"; then
++ case $host_os in
++ mingw* | pw32*)
++ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
++ want_nocaseglob=yes
++ else
++ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
++ fi
++ ;;
++ esac
++fi
++
+ file_magic_cmd=$lt_cv_file_magic_cmd
+ deplibs_check_method=$lt_cv_deplibs_check_method
+ test -z "$deplibs_check_method" && deplibs_check_method=unknown
+@@ -3169,7 +3327,11 @@ test -z "$deplibs_check_method" && depli
+ _LT_DECL([], [deplibs_check_method], [1],
+ [Method to check whether dependent libraries are shared objects])
+ _LT_DECL([], [file_magic_cmd], [1],
+- [Command to use when deplibs_check_method == "file_magic"])
++ [Command to use when deplibs_check_method = "file_magic"])
++_LT_DECL([], [file_magic_glob], [1],
++ [How to find potential files when deplibs_check_method = "file_magic"])
++_LT_DECL([], [want_nocaseglob], [1],
++ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+ ])# _LT_CHECK_MAGIC_METHOD
+
+
+@@ -3226,7 +3388,19 @@ if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+ else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+- AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
++ if test -n "$DUMPBIN"; then :
++ # Let the user override the test.
++ else
++ AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
++ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
++ *COFF*)
++ DUMPBIN="$DUMPBIN -symbols"
++ ;;
++ *)
++ DUMPBIN=:
++ ;;
++ esac
++ fi
+ AC_SUBST([DUMPBIN])
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+@@ -3239,13 +3413,13 @@ _LT_DECL([], [NM], [1], [A BSD- or MS-co
+ AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+ [lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+- (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
++ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+- (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
++ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+- (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
++ (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+ cat conftest.out >&AS_MESSAGE_LOG_FD
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+@@ -3260,23 +3434,84 @@ dnl aclocal-1.4 backwards compatibility:
+ dnl AC_DEFUN([AM_PROG_NM], [])
+ dnl AC_DEFUN([AC_PROG_NM], [])
+
++# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
++# --------------------------------
++# how to determine the name of the shared library
++# associated with a specific link library.
++# -- PORTME fill in with the dynamic library characteristics
++m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
++[m4_require([_LT_DECL_EGREP])
++m4_require([_LT_DECL_OBJDUMP])
++m4_require([_LT_DECL_DLLTOOL])
++AC_CACHE_CHECK([how to associate runtime and link libraries],
++lt_cv_sharedlib_from_linklib_cmd,
++[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+-# LT_LIB_M
+-# --------
+-# check for math library
+-AC_DEFUN([LT_LIB_M],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-LIBM=
+-case $host in
+-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+- # These system don't have libm, or don't need it
+- ;;
+-*-ncr-sysv4.3*)
+- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
++case $host_os in
++cygwin* | mingw* | pw32* | cegcc*)
++ # two different shell functions defined in ltmain.sh
++ # decide which to use based on capabilities of $DLLTOOL
++ case `$DLLTOOL --help 2>&1` in
++ *--identify-strict*)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
++ ;;
++ *)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
++ ;;
++ esac
+ ;;
+ *)
+- AC_CHECK_LIB(m, cos, LIBM="-lm")
++ # fallback: assume linklib IS sharedlib
++ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
++ ;;
++esac
++])
++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
++
++_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
++ [Command to associate shared and link libraries])
++])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
++
++
++# _LT_PATH_MANIFEST_TOOL
++# ----------------------
++# locate the manifest tool
++m4_defun([_LT_PATH_MANIFEST_TOOL],
++[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
++AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
++ [lt_cv_path_mainfest_tool=no
++ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
++ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
++ lt_cv_path_mainfest_tool=yes
++ fi
++ rm -f conftest*])
++if test "x$lt_cv_path_mainfest_tool" != xyes; then
++ MANIFEST_TOOL=:
++fi
++_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
++])# _LT_PATH_MANIFEST_TOOL
++
++
++# LT_LIB_M
++# --------
++# check for math library
++AC_DEFUN([LT_LIB_M],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++LIBM=
++case $host in
++*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
++ # These system don't have libm, or don't need it
++ ;;
++*-ncr-sysv4.3*)
++ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
++ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
++ ;;
++*)
++ AC_CHECK_LIB(m, cos, LIBM="-lm")
+ ;;
+ esac
+ AC_SUBST([LIBM])
+@@ -3296,7 +3531,12 @@ m4_defun([_LT_COMPILER_NO_RTTI],
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+ if test "$GCC" = yes; then
+- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
++ case $cc_basename in
++ nvcc*)
++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
++ *)
++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
++ esac
+
+ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+ lt_cv_prog_compiler_rtti_exceptions,
+@@ -3313,6 +3553,7 @@ _LT_TAGDECL([no_builtin_flag], [lt_prog_
+ m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+ [AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([AC_PROG_AWK])dnl
+ AC_REQUIRE([LT_PATH_NM])dnl
+ AC_REQUIRE([LT_PATH_LD])dnl
+ m4_require([_LT_DECL_SED])dnl
+@@ -3380,8 +3621,8 @@ esac
+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+ # Transform an extracted symbol line into symbol name and symbol address
+-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
+-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+ # Handle CRLF in mingw tool chain
+ opt_cr=
+@@ -3417,6 +3658,7 @@ for ac_symprfx in "" "_"; do
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
++ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+@@ -3438,7 +3680,7 @@ _LT_EOF
+ if AC_TRY_EVAL(ac_compile); then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
++ if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+@@ -3450,6 +3692,18 @@ _LT_EOF
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
++/* DATA imports from DLLs on WIN32 con't be const, because runtime
++ relocations are performed -- see ld's documentation on pseudo-relocs. */
++# define LT@&t@_DLSYM_CONST
++#elif defined(__osf__)
++/* This system does not cope well with relocations in const data. */
++# define LT@&t@_DLSYM_CONST
++#else
++# define LT@&t@_DLSYM_CONST const
++#endif
++
+ #ifdef __cplusplus
+ extern "C" {
+ #endif
+@@ -3461,7 +3715,7 @@ _LT_EOF
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+ /* The mapping between symbol names and symbols. */
+-const struct {
++LT@&t@_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+ }
+@@ -3487,15 +3741,15 @@ static const void *lt_preloaded_setup()
+ _LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+- lt_save_LIBS="$LIBS"
+- lt_save_CFLAGS="$CFLAGS"
++ lt_globsym_save_LIBS=$LIBS
++ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+- LIBS="$lt_save_LIBS"
+- CFLAGS="$lt_save_CFLAGS"
++ LIBS=$lt_globsym_save_LIBS
++ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+@@ -3528,6 +3782,13 @@ else
+ AC_MSG_RESULT(ok)
+ fi
+
++# Response file support.
++if test "$lt_cv_nm_interface" = "MS dumpbin"; then
++ nm_file_list_spec='@'
++elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
++ nm_file_list_spec='@'
++fi
++
+ _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+ [Take the output of nm and produce a listing of raw symbols and C names])
+ _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+@@ -3538,6 +3799,8 @@ _LT_DECL([global_symbol_to_c_name_addres
+ _LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+ [Transform the output of nm in a C name address pair when lib prefix is needed])
++_LT_DECL([], [nm_file_list_spec], [1],
++ [Specify filename containing input files for $NM])
+ ]) # _LT_CMD_GLOBAL_SYMBOLS
+
+
+@@ -3549,7 +3812,6 @@ _LT_TAGVAR(lt_prog_compiler_wl, $1)=
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+-AC_MSG_CHECKING([for $compiler option to produce PIC])
+ m4_if([$1], [CXX], [
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+@@ -3600,6 +3862,11 @@ m4_if([$1], [CXX], [
+ # DJGPP does not support shared libraries at all
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
++ haiku*)
++ # PIC is the default for Haiku.
++ # The "-static" flag exists, but is broken.
++ _LT_TAGVAR(lt_prog_compiler_static, $1)=
++ ;;
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+@@ -3649,6 +3916,12 @@ m4_if([$1], [CXX], [
+ ;;
+ esac
+ ;;
++ mingw* | cygwin* | os2* | pw32* | cegcc*)
++ # This hack is so that the source file can tell whether it is being
++ # built for inclusion in a dll (and should export symbols for example).
++ m4_if([$1], [GCJ], [],
++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+@@ -3738,8 +4011,8 @@ m4_if([$1], [CXX], [
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+- xlc* | xlC*)
+- # IBM XL 8.0 on PPC
++ xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
++ # IBM XL 8.0, 9.0 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+@@ -3769,7 +4042,7 @@ m4_if([$1], [CXX], [
+ ;;
+ esac
+ ;;
+- netbsd* | netbsdelf*-gnu)
++ netbsd*)
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+@@ -3801,7 +4074,7 @@ m4_if([$1], [CXX], [
+ ;;
+ solaris*)
+ case $cc_basename in
+- CC*)
++ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+@@ -3905,6 +4178,12 @@ m4_if([$1], [CXX], [
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+
++ haiku*)
++ # PIC is the default for Haiku.
++ # The "-static" flag exists, but is broken.
++ _LT_TAGVAR(lt_prog_compiler_static, $1)=
++ ;;
++
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+@@ -3947,6 +4226,13 @@ m4_if([$1], [CXX], [
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
++
++ case $cc_basename in
++ nvcc*) # Cuda Compiler Driver 2.2
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC'
++ ;;
++ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+@@ -4010,7 +4296,13 @@ m4_if([$1], [CXX], [
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+ ;;
+- pgcc* | pgf77* | pgf90* | pgf95*)
++ nagfor*)
++ # NAG Fortran compiler
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+@@ -4022,25 +4314,25 @@ m4_if([$1], [CXX], [
+ # All Alpha code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+- xl*)
+- # IBM XL C 8.0/Fortran 10.1 on PPC
++ xl* | bgxl* | bgf* | mpixl*)
++ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*)
+- # Sun C 5.9
++ *Sun\ F* | *Sun*Fortran*)
++ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+ ;;
+- *Sun\ F*)
+- # Sun Fortran 8.3 passes all unrecognized flags to the linker
++ *Sun\ C*)
++ # Sun C 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ ;;
+ esac
+ ;;
+@@ -4072,7 +4364,7 @@ m4_if([$1], [CXX], [
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ case $cc_basename in
+- f77* | f90* | f95*)
++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+@@ -4129,9 +4421,11 @@ case $host_os in
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+ ;;
+ esac
+-AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+- [How to pass a linker flag through the compiler])
++
++AC_CACHE_CHECK([for $compiler option to produce PIC],
++ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
++ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
++_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
+ #
+ # Check to make sure the PIC flag actually works.
+@@ -4150,6 +4444,8 @@ fi
+ _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+ [Additional compiler flags for building library objects])
+
++_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
++ [How to pass a linker flag through the compiler])
+ #
+ # Check to make sure the static flag actually works.
+ #
+@@ -4170,6 +4466,7 @@ _LT_TAGDECL([link_static_flag], [lt_prog
+ m4_defun([_LT_LINKER_SHLIBS],
+ [AC_REQUIRE([LT_PATH_LD])dnl
+ AC_REQUIRE([LT_PATH_NM])dnl
++m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+ m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_DECL_EGREP])dnl
+ m4_require([_LT_DECL_SED])dnl
+@@ -4178,30 +4475,35 @@ m4_require([_LT_TAG_COMPILER])dnl
+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ m4_if([$1], [CXX], [
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ case $host_os in
+ aix[[4-9]]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
++ # Also, AIX nm treats weak defined symbols like other global defined
++ # symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ ;;
+ pw32*)
+ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+- ;;
++ ;;
+ cygwin* | mingw* | cegcc*)
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+- ;;
+- linux* | k*bsd*-gnu)
+- _LT_TAGVAR(link_all_deplibs, $1)=no
+- ;;
++ case $cc_basename in
++ cl*) ;;
++ *)
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
++ ;;
++ esac
++ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+- ;;
++ ;;
+ esac
+- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ ], [
+ runpath_var=
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+@@ -4261,13 +4563,36 @@ dnl Note also adjust exclude_expsyms for
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+- linux* | k*bsd*-gnu)
+- _LT_TAGVAR(link_all_deplibs, $1)=no
+- ;;
+ esac
+
+ _LT_TAGVAR(ld_shlibs, $1)=yes
++
++ # On some targets, GNU ld is compatible enough with the native linker
++ # that we're better off using the native interface for both.
++ lt_use_gnu_ld_interface=no
+ if test "$with_gnu_ld" = yes; then
++ case $host_os in
++ aix*)
++ # The AIX port of GNU ld has always aspired to compatibility
++ # with the native linker. However, as the warning in the GNU ld
++ # block says, versions before 2.19.5* couldn't really create working
++ # shared libraries, regardless of the interface used.
++ case `$LD -v 2>&1` in
++ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
++ *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
++ *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
++ *)
++ lt_use_gnu_ld_interface=yes
++ ;;
++ esac
++ ;;
++ *)
++ lt_use_gnu_ld_interface=yes
++ ;;
++ esac
++ fi
++
++ if test "$lt_use_gnu_ld_interface" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+@@ -4301,11 +4626,12 @@ dnl Note also adjust exclude_expsyms for
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
++*** Warning: the GNU linker, at least up to release 2.19, is reported
+ *** to be unable to reliably create shared libraries on AIX.
+ *** Therefore, libtool is disabling shared libraries support. If you
+-*** really care for shared libraries, you may want to modify your PATH
+-*** so that a non-GNU linker is found, and then restart.
++*** really care for shared libraries, you may want to install binutils
++*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
++*** You will then need to restart the configuration process.
+
+ _LT_EOF
+ fi
+@@ -4341,10 +4667,12 @@ _LT_EOF
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+@@ -4362,6 +4690,11 @@ _LT_EOF
+ fi
+ ;;
+
++ haiku*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ ;;
++
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+@@ -4387,15 +4720,16 @@ _LT_EOF
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+- tmp_addflag=
++ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ pgf77* | pgf90* | pgf95* | pgfortran*)
++ # Portland Group f77 and f90 compilers
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+@@ -4406,13 +4740,17 @@ _LT_EOF
+ lf95*) # Lahey Fortran 8.1
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ tmp_sharedflag='--shared' ;;
+- xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
++ xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
++ nvcc*) # Cuda Compiler Driver 2.2
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(compiler_needs_object, $1)=yes
++ ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+@@ -4428,17 +4766,17 @@ _LT_EOF
+ fi
+
+ case $cc_basename in
+- xlf*)
++ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+- _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+@@ -4447,13 +4785,13 @@ _LT_EOF
+ fi
+ ;;
+
+- netbsd* | netbsdelf*-gnu)
++ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+@@ -4471,8 +4809,8 @@ _LT_EOF
+
+ _LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+@@ -4518,8 +4856,8 @@ _LT_EOF
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+@@ -4559,8 +4897,10 @@ _LT_EOF
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
++ # Also, AIX nm treats weak defined symbols like other global
++ # defined symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+@@ -4622,7 +4962,6 @@ _LT_EOF
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+- _LT_TAGVAR(link_all_deplibs, $1)=no
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+@@ -4648,9 +4987,9 @@ _LT_EOF
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
++ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+@@ -4659,14 +4998,19 @@ _LT_EOF
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
++ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+- # Exported symbols can be pulled into shared objects from archives
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++ if test "$with_gnu_ld" = yes; then
++ # We only use this code for GNU lds that support --whole-archive.
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++ else
++ # Exported symbols can be pulled into shared objects from archives
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+@@ -4698,20 +5042,63 @@ _LT_EOF
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- # Tell ltmain to make .lib files, not .a files.
+- libext=lib
+- # Tell ltmain to make .dll files, not .so files.
+- shrext_cmds=".dll"
+- # FIXME: Setting linknames here is a bad hack.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+- # The linker will automatically build a .lib file if we build a DLL.
+- _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+- # FIXME: Should let the user specify the lib program.
+- _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+- _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ case $cc_basename in
++ cl*)
++ # Native MSVC
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=yes
++ _LT_TAGVAR(file_list_spec, $1)='@'
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++ else
++ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++ fi~
++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++ linknames='
++ # The linker will not automatically build a static lib if we build a DLL.
++ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++ # Don't use ranlib
++ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
++ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
++ lt_tool_outputfile="@TOOL_OUTPUT@"~
++ case $lt_outputfile in
++ *.exe|*.EXE) ;;
++ *)
++ lt_outputfile="$lt_outputfile.exe"
++ lt_tool_outputfile="$lt_tool_outputfile.exe"
++ ;;
++ esac~
++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++ $RM "$lt_outputfile.manifest";
++ fi'
++ ;;
++ *)
++ # Assume MSVC wrapper
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
++ # The linker will automatically build a .lib file if we build a DLL.
++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++ # FIXME: Should let the user specify the lib program.
++ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ ;;
++ esac
+ ;;
+
+ darwin* | rhapsody*)
+@@ -4749,7 +5136,7 @@ _LT_EOF
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+@@ -4757,7 +5144,7 @@ _LT_EOF
+
+ hpux9*)
+ if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+@@ -4772,8 +5159,8 @@ _LT_EOF
+ ;;
+
+ hpux10*)
+- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+@@ -4791,16 +5178,16 @@ _LT_EOF
+ ;;
+
+ hpux11*)
+- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+@@ -4812,7 +5199,14 @@ _LT_EOF
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ m4_if($1, [], [
++ # Older versions of the 11.00 compiler do not understand -b yet
++ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
++ _LT_LINKER_OPTION([if $CC understands -b],
++ _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
++ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
++ [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
++ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+ ;;
+ esac
+ fi
+@@ -4840,19 +5234,34 @@ _LT_EOF
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+- save_LDFLAGS="$LDFLAGS"
+- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+- AC_LINK_IFELSE(int foo(void) {},
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+- )
+- LDFLAGS="$save_LDFLAGS"
++ # This should be the same for all languages, so no per-tag cache variable.
++ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
++ [lt_cv_irix_exported_symbol],
++ [save_LDFLAGS="$LDFLAGS"
++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
++ AC_LINK_IFELSE(
++ [AC_LANG_SOURCE(
++ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
++ [C++], [[int foo (void) { return 0; }]],
++ [Fortran 77], [[
++ subroutine foo
++ end]],
++ [Fortran], [[
++ subroutine foo
++ end]])])],
++ [lt_cv_irix_exported_symbol=yes],
++ [lt_cv_irix_exported_symbol=no])
++ LDFLAGS="$save_LDFLAGS"])
++ if test "$lt_cv_irix_exported_symbol" = yes; then
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
++ fi
+ else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+@@ -4861,7 +5270,7 @@ _LT_EOF
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+- netbsd* | netbsdelf*-gnu)
++ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+@@ -4914,17 +5323,17 @@ _LT_EOF
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
++ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+@@ -4934,13 +5343,13 @@ _LT_EOF
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
++ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+@@ -4953,9 +5362,9 @@ _LT_EOF
+ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+@@ -5131,36 +5540,38 @@ x|xyes)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+- $RM conftest*
+- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+-
+- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+- soname=conftest
+- lib=conftest
+- libobjs=conftest.$ac_objext
+- deplibs=
+- wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+- pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+- compiler_flags=-v
+- linker_flags=-v
+- verstring=
+- output_objdir=.
+- libname=conftest
+- lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+- _LT_TAGVAR(allow_undefined_flag, $1)=
+- if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+- then
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- else
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+- fi
+- _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+- else
+- cat conftest.err 1>&5
+- fi
+- $RM conftest*
+- AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
++ AC_CACHE_CHECK([whether -lc should be explicitly linked in],
++ [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
++ [$RM conftest*
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
++ soname=conftest
++ lib=conftest
++ libobjs=conftest.$ac_objext
++ deplibs=
++ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
++ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
++ compiler_flags=-v
++ linker_flags=-v
++ verstring=
++ output_objdir=.
++ libname=conftest
++ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
++ _LT_TAGVAR(allow_undefined_flag, $1)=
++ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
++ then
++ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ else
++ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++ fi
++ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
++ else
++ cat conftest.err 1>&5
++ fi
++ $RM conftest*
++ ])
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+ ;;
+ esac
+ fi
+@@ -5225,8 +5636,6 @@ _LT_TAGDECL([], [inherit_rpath], [0],
+ to runtime path list])
+ _LT_TAGDECL([], [link_all_deplibs], [0],
+ [Whether libtool must link a program against all its dependency libraries])
+-_LT_TAGDECL([], [fix_srcfile_path], [1],
+- [Fix the shell variable $srcfile for the compiler])
+ _LT_TAGDECL([], [always_export_symbols], [0],
+ [Set to "yes" if exported symbols are required])
+ _LT_TAGDECL([], [export_symbols_cmds], [2],
+@@ -5237,6 +5646,8 @@ _LT_TAGDECL([], [include_expsyms], [1],
+ [Symbols that must always be exported])
+ _LT_TAGDECL([], [prelink_cmds], [2],
+ [Commands necessary for linking programs (against libraries) with templates])
++_LT_TAGDECL([], [postlink_cmds], [2],
++ [Commands necessary for finishing linking programs])
+ _LT_TAGDECL([], [file_list_spec], [1],
+ [Specify filename containing input files])
+ dnl FIXME: Not yet implemented
+@@ -5330,37 +5741,22 @@ CC="$lt_save_CC"
+ ])# _LT_LANG_C_CONFIG
+
+
+-# _LT_PROG_CXX
+-# ------------
+-# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+-# compiler, we have our own version here.
+-m4_defun([_LT_PROG_CXX],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+-AC_PROG_CXX
+-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+- (test "X$CXX" != "Xg++"))) ; then
+- AC_PROG_CXXCPP
+-else
+- _lt_caught_CXX_error=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_CXX
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_CXX], [])
+-
+-
+ # _LT_LANG_CXX_CONFIG([TAG])
+ # --------------------------
+ # Ensure that the configuration variables for a C++ compiler are suitably
+ # defined. These variables are subsequently used by _LT_CONFIG to write
+ # the compiler configuration to `libtool'.
+ m4_defun([_LT_LANG_CXX_CONFIG],
+-[AC_REQUIRE([_LT_PROG_CXX])dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_PATH_MANIFEST_TOOL])dnl
++if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
++ (test "X$CXX" != "Xg++"))) ; then
++ AC_PROG_CXXCPP
++else
++ _lt_caught_CXX_error=yes
++fi
+
+ AC_LANG_PUSH(C++)
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+@@ -5382,6 +5778,8 @@ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+ _LT_TAGVAR(no_undefined_flag, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+@@ -5413,6 +5811,7 @@ if test "$_lt_caught_CXX_error" != yes;
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
++ lt_save_CFLAGS=$CFLAGS
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+@@ -5430,6 +5829,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
++ CFLAGS=$CXXFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+@@ -5451,8 +5851,8 @@ if test "$_lt_caught_CXX_error" != yes;
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+@@ -5484,7 +5884,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ GXX=no
+@@ -5593,10 +5993,10 @@ if test "$_lt_caught_CXX_error" != yes;
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+- _LT_SYS_MODULE_PATH_AIX
++ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+@@ -5605,14 +6005,19 @@ if test "$_lt_caught_CXX_error" != yes;
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
++ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+- # Exported symbols can be pulled into shared objects from archives
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++ if test "$with_gnu_ld" = yes; then
++ # We only use this code for GNU lds that support --whole-archive.
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++ else
++ # Exported symbols can be pulled into shared objects from archives
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared
+ # libraries.
+@@ -5642,28 +6047,75 @@ if test "$_lt_caught_CXX_error" != yes;
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+- # as there is no search path for DLLs.
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(always_export_symbols, $1)=no
+- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+-
+- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- # If the export-symbols file already is a .def file (1st line
+- # is EXPORTS), use it as is; otherwise, prepend...
+- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+- cp $export_symbols $output_objdir/$soname.def;
+- else
+- echo EXPORTS > $output_objdir/$soname.def;
+- cat $export_symbols >> $output_objdir/$soname.def;
+- fi~
+- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
++ case $GXX,$cc_basename in
++ ,cl* | no,cl*)
++ # Native MSVC
++ # hardcode_libdir_flag_spec is actually meaningless, as there is
++ # no search path for DLLs.
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=yes
++ _LT_TAGVAR(file_list_spec, $1)='@'
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++ else
++ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++ fi~
++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++ linknames='
++ # The linker will not automatically build a static lib if we build a DLL.
++ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ # Don't use ranlib
++ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
++ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
++ lt_tool_outputfile="@TOOL_OUTPUT@"~
++ case $lt_outputfile in
++ *.exe|*.EXE) ;;
++ *)
++ lt_outputfile="$lt_outputfile.exe"
++ lt_tool_outputfile="$lt_tool_outputfile.exe"
++ ;;
++ esac~
++ func_to_tool_file "$lt_outputfile"~
++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++ $RM "$lt_outputfile.manifest";
++ fi'
++ ;;
++ *)
++ # g++
++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
++ # as there is no search path for DLLs.
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=no
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++
++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ # If the export-symbols file already is a .def file (1st line
++ # is EXPORTS), use it as is; otherwise, prepend...
++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ cp $export_symbols $output_objdir/$soname.def;
++ else
++ echo EXPORTS > $output_objdir/$soname.def;
++ cat $export_symbols >> $output_objdir/$soname.def;
++ fi~
++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+@@ -5705,6 +6157,11 @@ if test "$_lt_caught_CXX_error" != yes;
+ gnu*)
+ ;;
+
++ haiku*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ ;;
++
+ hpux9*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+@@ -5729,11 +6186,11 @@ if test "$_lt_caught_CXX_error" != yes;
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+@@ -5794,7 +6251,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+@@ -5804,10 +6261,10 @@ if test "$_lt_caught_CXX_error" != yes;
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+@@ -5837,7 +6294,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ case $cc_basename in
+ CC*)
+ # SGI C++
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+@@ -5848,9 +6305,9 @@ if test "$_lt_caught_CXX_error" != yes;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ fi
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+@@ -5879,7 +6336,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+@@ -5916,26 +6373,26 @@ if test "$_lt_caught_CXX_error" != yes;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+- *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
++ *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
++ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
++ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
+ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+- *) # Version 6 will use weak symbols
++ *) # Version 6 and above use weak symbols
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+@@ -5943,7 +6400,7 @@ if test "$_lt_caught_CXX_error" != yes;
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+@@ -5962,9 +6419,9 @@ if test "$_lt_caught_CXX_error" != yes;
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ ;;
+- xl*)
++ xl* | mpixl* | bgxl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+@@ -5984,13 +6441,13 @@ if test "$_lt_caught_CXX_error" != yes;
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+- output_verbose_link_cmd='echo'
++ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+@@ -6059,7 +6516,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+- output_verbose_link_cmd=echo
++ output_verbose_link_cmd=func_echo_all
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+@@ -6094,15 +6551,15 @@ if test "$_lt_caught_CXX_error" != yes;
+ case $host in
+ osf3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+ $RM $lib.exp'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ ;;
+@@ -6118,17 +6575,17 @@ if test "$_lt_caught_CXX_error" != yes;
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ case $host in
+ osf3*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
+
+@@ -6138,7 +6595,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+@@ -6174,7 +6631,7 @@ if test "$_lt_caught_CXX_error" != yes;
+
+ solaris*)
+ case $cc_basename in
+- CC*)
++ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+@@ -6195,7 +6652,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+- output_verbose_link_cmd='echo'
++ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+@@ -6215,14 +6672,14 @@ if test "$_lt_caught_CXX_error" != yes;
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+@@ -6233,7 +6690,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+- output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ fi
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+@@ -6287,6 +6744,10 @@ if test "$_lt_caught_CXX_error" != yes;
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
++ '"$_LT_TAGVAR(old_archive_cmds, $1)"
++ _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
++ '"$_LT_TAGVAR(reload_cmds, $1)"
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+@@ -6342,6 +6803,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
++ CFLAGS=$lt_save_CFLAGS
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+@@ -6356,6 +6818,29 @@ AC_LANG_POP
+ ])# _LT_LANG_CXX_CONFIG
+
+
++# _LT_FUNC_STRIPNAME_CNF
++# ----------------------
++# func_stripname_cnf prefix suffix name
++# strip PREFIX and SUFFIX off of NAME.
++# PREFIX and SUFFIX must not contain globbing or regex special
++# characters, hashes, percent signs, but SUFFIX may contain a leading
++# dot (in which case that matches only a dot).
++#
++# This function is identical to the (non-XSI) version of func_stripname,
++# except this one can be used by m4 code that may be executed by configure,
++# rather than the libtool script.
++m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
++AC_REQUIRE([_LT_DECL_SED])
++AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
++func_stripname_cnf ()
++{
++ case ${2} in
++ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
++ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
++ esac
++} # func_stripname_cnf
++])# _LT_FUNC_STRIPNAME_CNF
++
+ # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+ # ---------------------------------
+ # Figure out "hidden" library dependencies from verbose
+@@ -6364,6 +6849,7 @@ AC_LANG_POP
+ # objects, libraries and library flags.
+ m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+ [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+ # Dependencies to place before and after the object being linked:
+ _LT_TAGVAR(predep_objects, $1)=
+ _LT_TAGVAR(postdep_objects, $1)=
+@@ -6414,6 +6900,13 @@ public class foo {
+ };
+ _LT_EOF
+ ])
++
++_lt_libdeps_save_CFLAGS=$CFLAGS
++case "$CC $CFLAGS " in #(
++*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
++*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
++esac
++
+ dnl Parse the compiler output and extract the necessary
+ dnl objects, libraries and library flags.
+ if AC_TRY_EVAL(ac_compile); then
+@@ -6425,7 +6918,7 @@ if AC_TRY_EVAL(ac_compile); then
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+- case $p in
++ case ${prev}${p} in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+@@ -6434,13 +6927,22 @@ if AC_TRY_EVAL(ac_compile); then
+ test $p = "-R"; then
+ prev=$p
+ continue
+- else
+- prev=
+ fi
+
++ # Expand the sysroot to ease extracting the directories later.
++ if test -z "$prev"; then
++ case $p in
++ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
++ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
++ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
++ esac
++ fi
++ case $p in
++ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
++ esac
+ if test "$pre_test_object_deps_done" = no; then
+- case $p in
+- -L* | -R*)
++ case ${prev} in
++ -L | -R)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+@@ -6460,8 +6962,10 @@ if AC_TRY_EVAL(ac_compile); then
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ fi
+ fi
++ prev=
+ ;;
+
++ *.lto.$objext) ;; # Ignore GCC LTO objects
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+@@ -6497,6 +7001,7 @@ else
+ fi
+
+ $RM -f confest.$objext
++CFLAGS=$_lt_libdeps_save_CFLAGS
+
+ # PORTME: override above test on systems where it is broken
+ m4_if([$1], [CXX],
+@@ -6533,7 +7038,7 @@ linux*)
+
+ solaris*)
+ case $cc_basename in
+- CC*)
++ CC* | sunCC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+@@ -6577,32 +7082,16 @@ _LT_TAGDECL([], [compiler_lib_search_pat
+ ])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+-# _LT_PROG_F77
+-# ------------
+-# Since AC_PROG_F77 is broken, in that it returns the empty string
+-# if there is no fortran compiler, we have our own version here.
+-m4_defun([_LT_PROG_F77],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+-AC_PROG_F77
+-if test -z "$F77" || test "X$F77" = "Xno"; then
+- _lt_disable_F77=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_F77
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_F77], [])
+-
+-
+ # _LT_LANG_F77_CONFIG([TAG])
+ # --------------------------
+ # Ensure that the configuration variables for a Fortran 77 compiler are
+ # suitably defined. These variables are subsequently used by _LT_CONFIG
+ # to write the compiler configuration to `libtool'.
+ m4_defun([_LT_LANG_F77_CONFIG],
+-[AC_REQUIRE([_LT_PROG_F77])dnl
+-AC_LANG_PUSH(Fortran 77)
++[AC_LANG_PUSH(Fortran 77)
++if test -z "$F77" || test "X$F77" = "Xno"; then
++ _lt_disable_F77=yes
++fi
+
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+@@ -6621,6 +7110,8 @@ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+ _LT_TAGVAR(no_undefined_flag, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+@@ -6660,7 +7151,9 @@ if test "$_lt_disable_F77" != yes; then
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
++ lt_save_CFLAGS=$CFLAGS
+ CC=${F77-"f77"}
++ CFLAGS=$FFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+@@ -6714,38 +7207,24 @@ if test "$_lt_disable_F77" != yes; then
+
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
++ CFLAGS="$lt_save_CFLAGS"
+ fi # test "$_lt_disable_F77" != yes
+
+ AC_LANG_POP
+ ])# _LT_LANG_F77_CONFIG
+
+
+-# _LT_PROG_FC
+-# -----------
+-# Since AC_PROG_FC is broken, in that it returns the empty string
+-# if there is no fortran compiler, we have our own version here.
+-m4_defun([_LT_PROG_FC],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+-AC_PROG_FC
+-if test -z "$FC" || test "X$FC" = "Xno"; then
+- _lt_disable_FC=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_FC
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_FC], [])
+-
+-
+ # _LT_LANG_FC_CONFIG([TAG])
+ # -------------------------
+ # Ensure that the configuration variables for a Fortran compiler are
+ # suitably defined. These variables are subsequently used by _LT_CONFIG
+ # to write the compiler configuration to `libtool'.
+ m4_defun([_LT_LANG_FC_CONFIG],
+-[AC_REQUIRE([_LT_PROG_FC])dnl
+-AC_LANG_PUSH(Fortran)
++[AC_LANG_PUSH(Fortran)
++
++if test -z "$FC" || test "X$FC" = "Xno"; then
++ _lt_disable_FC=yes
++fi
+
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+@@ -6764,6 +7243,8 @@ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+ _LT_TAGVAR(no_undefined_flag, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+@@ -6803,7 +7284,9 @@ if test "$_lt_disable_FC" != yes; then
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
++ lt_save_CFLAGS=$CFLAGS
+ CC=${FC-"f95"}
++ CFLAGS=$FCFLAGS
+ compiler=$CC
+ GCC=$ac_cv_fc_compiler_gnu
+
+@@ -6859,7 +7342,8 @@ if test "$_lt_disable_FC" != yes; then
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+- CC="$lt_save_CC"
++ CC=$lt_save_CC
++ CFLAGS=$lt_save_CFLAGS
+ fi # test "$_lt_disable_FC" != yes
+
+ AC_LANG_POP
+@@ -6896,10 +7380,12 @@ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+-lt_save_CC="$CC"
++lt_save_CC=$CC
++lt_save_CFLAGS=$CFLAGS
+ lt_save_GCC=$GCC
+ GCC=yes
+ CC=${GCJ-"gcj"}
++CFLAGS=$GCJFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_TAGVAR(LD, $1)="$LD"
+@@ -6909,6 +7395,8 @@ _LT_CC_BASENAME([$compiler])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+ _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+@@ -6928,7 +7416,8 @@ fi
+ AC_LANG_RESTORE
+
+ GCC=$lt_save_GCC
+-CC="$lt_save_CC"
++CC=$lt_save_CC
++CFLAGS=$lt_save_CFLAGS
+ ])# _LT_LANG_GCJ_CONFIG
+
+
+@@ -6963,9 +7452,11 @@ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
++lt_save_CFLAGS=$CFLAGS
+ lt_save_GCC=$GCC
+ GCC=
+ CC=${RC-"windres"}
++CFLAGS=
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+@@ -6978,7 +7469,8 @@ fi
+
+ GCC=$lt_save_GCC
+ AC_LANG_RESTORE
+-CC="$lt_save_CC"
++CC=$lt_save_CC
++CFLAGS=$lt_save_CFLAGS
+ ])# _LT_LANG_RC_CONFIG
+
+
+@@ -7037,6 +7529,15 @@ _LT_DECL([], [OBJDUMP], [1], [An object
+ AC_SUBST([OBJDUMP])
+ ])
+
++# _LT_DECL_DLLTOOL
++# ----------------
++# Ensure DLLTOOL variable is set.
++m4_defun([_LT_DECL_DLLTOOL],
++[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
++AC_SUBST([DLLTOOL])
++])
+
+ # _LT_DECL_SED
+ # ------------
+@@ -7130,8 +7631,8 @@ m4_defun([_LT_CHECK_SHELL_FEATURES],
+ # Try some XSI features
+ xsi_shell=no
+ ( _lt_dummy="a/b/c"
+- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+- = c,a/b,, \
++ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
++ = c,a/b,b/c, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+@@ -7170,208 +7671,162 @@ _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn
+ ])# _LT_CHECK_SHELL_FEATURES
+
+
+-# _LT_PROG_XSI_SHELLFNS
+-# ---------------------
+-# Bourne and XSI compatible variants of some useful shell functions.
+-m4_defun([_LT_PROG_XSI_SHELLFNS],
+-[case $xsi_shell in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+-}
+-
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result="${1##*/}"
+-}
+-
+-# func_dirname_and_basename file append nondir_replacement
+-# perform func_basename and func_dirname in a single function
+-# call:
+-# dirname: Compute the dirname of FILE. If nonempty,
+-# add APPEND to the result, otherwise set result
+-# to NONDIR_REPLACEMENT.
+-# value returned in "$func_dirname_result"
+-# basename: Compute filename of FILE.
+-# value retuned in "$func_basename_result"
+-# Implementation must be kept synchronized with func_dirname
+-# and func_basename. For efficiency, we do not delegate to
+-# those functions but instead duplicate the functionality here.
+-func_dirname_and_basename ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+- func_basename_result="${1##*/}"
+-}
+-
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-func_stripname ()
+-{
+- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+- # positional parameters, so assign one to ordinary parameter first.
+- func_stripname_result=${3}
+- func_stripname_result=${func_stripname_result#"${1}"}
+- func_stripname_result=${func_stripname_result%"${2}"}
+-}
+-
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=${1%%=*}
+- func_opt_split_arg=${1#*=}
+-}
+-
+-# func_lo2o object
+-func_lo2o ()
+-{
+- case ${1} in
+- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+- *) func_lo2o_result=${1} ;;
+- esac
+-}
+-
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=${1%.*}.lo
+-}
++# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
++# ------------------------------------------------------
++# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
++# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
++m4_defun([_LT_PROG_FUNCTION_REPLACE],
++[dnl {
++sed -e '/^$1 ()$/,/^} # $1 /c\
++$1 ()\
++{\
++m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
++} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++])
+
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=$(( $[*] ))
+-}
+
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=${#1}
+-}
++# _LT_PROG_REPLACE_SHELLFNS
++# -------------------------
++# Replace existing portable implementations of several shell functions with
++# equivalent extended shell implementations where those features are available..
++m4_defun([_LT_PROG_REPLACE_SHELLFNS],
++[if test x"$xsi_shell" = xyes; then
++ _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
++ case ${1} in
++ */*) func_dirname_result="${1%/*}${2}" ;;
++ * ) func_dirname_result="${3}" ;;
++ esac])
++
++ _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
++ func_basename_result="${1##*/}"])
++
++ _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
++ case ${1} in
++ */*) func_dirname_result="${1%/*}${2}" ;;
++ * ) func_dirname_result="${3}" ;;
++ esac
++ func_basename_result="${1##*/}"])
+
+-_LT_EOF
+- ;;
+- *) # Bourne compatible functions.
+- cat << \_LT_EOF >> "$cfgfile"
++ _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
++ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
++ # positional parameters, so assign one to ordinary parameter first.
++ func_stripname_result=${3}
++ func_stripname_result=${func_stripname_result#"${1}"}
++ func_stripname_result=${func_stripname_result%"${2}"}])
+
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- # Extract subdirectory from the argument.
+- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+- if test "X$func_dirname_result" = "X${1}"; then
+- func_dirname_result="${3}"
+- else
+- func_dirname_result="$func_dirname_result${2}"
+- fi
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
++ func_split_long_opt_name=${1%%=*}
++ func_split_long_opt_arg=${1#*=}])
+
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
++ func_split_short_opt_arg=${1#??}
++ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
+
+-dnl func_dirname_and_basename
+-dnl A portable version of this function is already defined in general.m4sh
+-dnl so there is no need for it here.
++ _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
++ case ${1} in
++ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
++ *) func_lo2o_result=${1} ;;
++ esac])
+
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-# func_strip_suffix prefix name
+-func_stripname ()
+-{
+- case ${2} in
+- .*) func_stripname_result=`$ECHO "X${3}" \
+- | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+- *) func_stripname_result=`$ECHO "X${3}" \
+- | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+- esac
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
+
+-# sed scripts:
+-my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+-my_sed_long_arg='1s/^-[[^=]]*=//'
++ _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
+
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+- func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
++fi
+
+-# func_lo2o object
+-func_lo2o ()
+-{
+- func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+-}
++if test x"$lt_shell_append" = xyes; then
++ _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
+
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
++ func_quote_for_eval "${2}"
++dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
++ eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
+
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=`expr "$[@]"`
+-}
+-
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+-}
++ # Save a `func_append' function call where possible by direct use of '+='
++ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++else
++ # Save a `func_append' function call even when '+=' is not available
++ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++fi
+
+-_LT_EOF
+-esac
++if test x"$_lt_function_replace_fail" = x":"; then
++ AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
++fi
++])
+
+-case $lt_shell_append in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$[1]+=\$[2]"
+-}
+-_LT_EOF
++# _LT_PATH_CONVERSION_FUNCTIONS
++# -----------------------------
++# Determine which file name conversion functions should be used by
++# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
++# for certain cross-compile configurations and native mingw.
++m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++AC_MSG_CHECKING([how to convert $build file names to $host format])
++AC_CACHE_VAL(lt_cv_to_host_file_cmd,
++[case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
++ ;;
++ esac
+ ;;
+- *)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$[1]=\$$[1]\$[2]"
+-}
+-
+-_LT_EOF
++ *-*-cygwin* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
++ ;;
++ esac
+ ;;
+- esac
++ * ) # unhandled hosts (and "normal" native builds)
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++esac
++])
++to_host_file_cmd=$lt_cv_to_host_file_cmd
++AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
++_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
++ [0], [convert $build file names to $host format])dnl
++
++AC_MSG_CHECKING([how to convert $build file names to toolchain format])
++AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
++[#assume ordinary cross tools, or native build.
++lt_cv_to_tool_file_cmd=func_convert_file_noop
++case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ esac
++ ;;
++esac
+ ])
++to_tool_file_cmd=$lt_cv_to_tool_file_cmd
++AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
++_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
++ [0], [convert $build files to toolchain format])dnl
++])# _LT_PATH_CONVERSION_FUNCTIONS
+Index: gnutls-2.10.1/libextra/m4/libtool.m4
+===================================================================
+--- gnutls-2.10.1.orig/libextra/m4/libtool.m4
++++ gnutls-2.10.1/libextra/m4/libtool.m4
+@@ -1,7 +1,8 @@
+ # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+ #
+ # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-# 2006, 2007, 2008 Free Software Foundation, Inc.
++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
++# Inc.
+ # Written by Gordon Matzigkeit, 1996
+ #
+ # This file is free software; the Free Software Foundation gives
+@@ -10,7 +11,8 @@
+
+ m4_define([_LT_COPYING], [dnl
+ # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-# 2006, 2007, 2008 Free Software Foundation, Inc.
++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
++# Inc.
+ # Written by Gordon Matzigkeit, 1996
+ #
+ # This file is part of GNU Libtool.
+@@ -37,7 +39,7 @@ m4_define([_LT_COPYING], [dnl
+ # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ ])
+
+-# serial 56 LT_INIT
++# serial 57 LT_INIT
+
+
+ # LT_PREREQ(VERSION)
+@@ -66,6 +68,7 @@ esac
+ # ------------------
+ AC_DEFUN([LT_INIT],
+ [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
++AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+ AC_BEFORE([$0], [LT_LANG])dnl
+ AC_BEFORE([$0], [LT_OUTPUT])dnl
+ AC_BEFORE([$0], [LTDL_INIT])dnl
+@@ -82,6 +85,8 @@ AC_REQUIRE([LTVERSION_VERSION])dnl
+ AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+ m4_require([_LT_PROG_LTMAIN])dnl
+
++_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
++
+ dnl Parse OPTIONS
+ _LT_SET_OPTIONS([$0], [$1])
+
+@@ -89,7 +94,8 @@ _LT_SET_OPTIONS([$0], [$1])
+ LIBTOOL_DEPS="$ltmain"
+
+ # Always use our own libtool.
+-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++LIBTOOL='$(SHELL) $(top_builddir)'
++LIBTOOL="$LIBTOOL/${host_alias}-libtool"
+ AC_SUBST(LIBTOOL)dnl
+
+ _LT_SETUP
+@@ -118,7 +124,7 @@ m4_defun([_LT_CC_BASENAME],
+ *) break;;
+ esac
+ done
+-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+ ])
+
+
+@@ -138,6 +144,9 @@ m4_defun([_LT_FILEUTILS_DEFAULTS],
+ m4_defun([_LT_SETUP],
+ [AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
++AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
++
+ _LT_DECL([], [host_alias], [0], [The host system])dnl
+ _LT_DECL([], [host], [0])dnl
+ _LT_DECL([], [host_os], [0])dnl
+@@ -160,10 +169,13 @@ _LT_DECL([], [exeext], [0], [Executable
+ dnl
+ m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_CHECK_SHELL_FEATURES])dnl
++m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+ m4_require([_LT_CMD_RELOAD])dnl
+ m4_require([_LT_CHECK_MAGIC_METHOD])dnl
++m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+ m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+ m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
++m4_require([_LT_WITH_SYSROOT])dnl
+
+ _LT_CONFIG_LIBTOOL_INIT([
+ # See if we are running on zsh, and set the options which allow our
+@@ -179,7 +191,6 @@ fi
+ _LT_CHECK_OBJDIR
+
+ m4_require([_LT_TAG_COMPILER])dnl
+-_LT_PROG_ECHO_BACKSLASH
+
+ case $host_os in
+ aix3*)
+@@ -193,25 +204,8 @@ aix3*)
+ ;;
+ esac
+
+-# Sed substitution that helps us do robust quoting. It backslashifies
+-# metacharacters that are still active within double-quoted strings.
+-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+-
+-# Same as above, but do not quote variable references.
+-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+-
+-# Sed substitution to delay expansion of an escaped shell variable in a
+-# double_quote_subst'ed string.
+-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+-
+-# Sed substitution to delay expansion of an escaped single quote.
+-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+-
+-# Sed substitution to avoid accidental globbing in evaled expressions
+-no_glob_subst='s/\*/\\\*/g'
+-
+ # Global variables:
+-ofile=libtool
++ofile=${host_alias}-libtool
+ can_build_shared=yes
+
+ # All known linkers require a `.a' archive for static linking (except MSVC,
+@@ -250,6 +244,28 @@ _LT_CONFIG_COMMANDS
+ ])# _LT_SETUP
+
+
++# _LT_PREPARE_SED_QUOTE_VARS
++# --------------------------
++# Define a few sed substitution that help us do robust quoting.
++m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
++[# Backslashify metacharacters that are still active within
++# double-quoted strings.
++sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
++
++# Same as above, but do not quote variable references.
++double_quote_subst='s/\([["`\\]]\)/\\\1/g'
++
++# Sed substitution to delay expansion of an escaped shell variable in a
++# double_quote_subst'ed string.
++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
++
++# Sed substitution to delay expansion of an escaped single quote.
++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
++
++# Sed substitution to avoid accidental globbing in evaled expressions
++no_glob_subst='s/\*/\\\*/g'
++])
++
+ # _LT_PROG_LTMAIN
+ # ---------------
+ # Note that this code is called both from `configure', and `config.status'
+@@ -408,7 +424,7 @@ m4_define([_lt_decl_all_varnames],
+ # declaration there will have the same value as in `configure'. VARNAME
+ # must have a single quote delimited value for this to work.
+ m4_define([_LT_CONFIG_STATUS_DECLARE],
+-[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
++[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+
+
+ # _LT_CONFIG_STATUS_DECLARATIONS
+@@ -418,7 +434,7 @@ m4_define([_LT_CONFIG_STATUS_DECLARE],
+ # embedded single quotes properly. In configure, this macro expands
+ # each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+ #
+-# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
++# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+ m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+ [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+@@ -517,12 +533,20 @@ LTCC='$LTCC'
+ LTCFLAGS='$LTCFLAGS'
+ compiler='$compiler_DEFAULT'
+
++# A function that is used when there is no print builtin or printf.
++func_fallback_echo ()
++{
++ eval 'cat <<_LTECHO_EOF
++\$[]1
++_LTECHO_EOF'
++}
++
+ # Quote evaled strings.
+ for var in lt_decl_all_varnames([[ \
+ ]], lt_decl_quote_varnames); do
+- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
++ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+@@ -533,9 +557,9 @@ done
+ # Double-quote double-evaled strings.
+ for var in lt_decl_all_varnames([[ \
+ ]], lt_decl_dquote_varnames); do
+- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
++ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+@@ -543,16 +567,38 @@ for var in lt_decl_all_varnames([[ \
+ esac
+ done
+
+-# Fix-up fallback echo if it was mangled by the above quoting rules.
+-case \$lt_ECHO in
+-*'\\\[$]0 --fallback-echo"')dnl "
+- lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+- ;;
+-esac
+-
+ _LT_OUTPUT_LIBTOOL_INIT
+ ])
+
++# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
++# ------------------------------------
++# Generate a child script FILE with all initialization necessary to
++# reuse the environment learned by the parent script, and make the
++# file executable. If COMMENT is supplied, it is inserted after the
++# `#!' sequence but before initialization text begins. After this
++# macro, additional text can be appended to FILE to form the body of
++# the child script. The macro ends with non-zero status if the
++# file could not be fully written (such as if the disk is full).
++m4_ifdef([AS_INIT_GENERATED],
++[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
++[m4_defun([_LT_GENERATED_FILE_INIT],
++[m4_require([AS_PREPARE])]dnl
++[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
++[lt_write_fail=0
++cat >$1 <<_ASEOF || lt_write_fail=1
++#! $SHELL
++# Generated by $as_me.
++$2
++SHELL=\${CONFIG_SHELL-$SHELL}
++export SHELL
++_ASEOF
++cat >>$1 <<\_ASEOF || lt_write_fail=1
++AS_SHELL_SANITIZE
++_AS_PREPARE
++exec AS_MESSAGE_FD>&1
++_ASEOF
++test $lt_write_fail = 0 && chmod +x $1[]dnl
++m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
+
+ # LT_OUTPUT
+ # ---------
+@@ -562,20 +608,11 @@ _LT_OUTPUT_LIBTOOL_INIT
+ AC_DEFUN([LT_OUTPUT],
+ [: ${CONFIG_LT=./config.lt}
+ AC_MSG_NOTICE([creating $CONFIG_LT])
+-cat >"$CONFIG_LT" <<_LTEOF
+-#! $SHELL
+-# Generated by $as_me.
+-# Run this file to recreate a libtool stub with the current configuration.
+-
+-lt_cl_silent=false
+-SHELL=\${CONFIG_SHELL-$SHELL}
+-_LTEOF
++_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
++[# Run this file to recreate a libtool stub with the current configuration.])
+
+ cat >>"$CONFIG_LT" <<\_LTEOF
+-AS_SHELL_SANITIZE
+-_AS_PREPARE
+-
+-exec AS_MESSAGE_FD>&1
++lt_cl_silent=false
+ exec AS_MESSAGE_LOG_FD>>config.log
+ {
+ echo
+@@ -601,7 +638,7 @@ m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_
+ m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+ configured by $[0], generated by m4_PACKAGE_STRING.
+
+-Copyright (C) 2008 Free Software Foundation, Inc.
++Copyright (C) 2010 Free Software Foundation, Inc.
+ This config.lt script is free software; the Free Software Foundation
+ gives unlimited permision to copy, distribute and modify it."
+
+@@ -646,15 +683,13 @@ chmod +x "$CONFIG_LT"
+ # appending to config.log, which fails on DOS, as config.log is still kept
+ # open by configure. Here we exec the FD to /dev/null, effectively closing
+ # config.log, so it can be properly (re)opened and appended to by config.lt.
+-if test "$no_create" != yes; then
+- lt_cl_success=:
+- test "$silent" = yes &&
+- lt_config_lt_args="$lt_config_lt_args --quiet"
+- exec AS_MESSAGE_LOG_FD>/dev/null
+- $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+- exec AS_MESSAGE_LOG_FD>>config.log
+- $lt_cl_success || AS_EXIT(1)
+-fi
++lt_cl_success=:
++test "$silent" = yes &&
++ lt_config_lt_args="$lt_config_lt_args --quiet"
++exec AS_MESSAGE_LOG_FD>/dev/null
++$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
++exec AS_MESSAGE_LOG_FD>>config.log
++$lt_cl_success || AS_EXIT(1)
+ ])# LT_OUTPUT
+
+
+@@ -717,15 +752,12 @@ _LT_EOF
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
++ sed '$q' "$ltmain" >> "$cfgfile" \
++ || (rm -f "$cfgfile"; exit 1)
+
+- _LT_PROG_XSI_SHELLFNS
++ _LT_PROG_REPLACE_SHELLFNS
+
+- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
+-
+- mv -f "$cfgfile" "$ofile" ||
++ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+ ],
+@@ -831,11 +863,13 @@ AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)
+ AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+ AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+ AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
++AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
+ dnl aclocal-1.4 backwards compatibility:
+ dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+ dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+ dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+ dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
++dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+
+
+ # _LT_TAG_COMPILER
+@@ -940,6 +974,31 @@ m4_defun_once([_LT_REQUIRED_DARWIN_CHECK
+ [lt_cv_ld_exported_symbols_list=no])
+ LDFLAGS="$save_LDFLAGS"
+ ])
++ AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
++ [lt_cv_ld_force_load=no
++ cat > conftest.c << _LT_EOF
++int forced_loaded() { return 2;}
++_LT_EOF
++ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
++ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
++ echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
++ $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
++ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
++ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
++ cat > conftest.c << _LT_EOF
++int main() { return 0;}
++_LT_EOF
++ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
++ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
++ _lt_result=$?
++ if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
++ lt_cv_ld_force_load=yes
++ else
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ fi
++ rm -f conftest.err libconftest.a conftest conftest.c
++ rm -rf conftest.dSYM
++ ])
+ case $host_os in
+ rhapsody* | darwin1.[[012]])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+@@ -967,7 +1026,7 @@ m4_defun_once([_LT_REQUIRED_DARWIN_CHECK
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+- if test "$DSYMUTIL" != ":"; then
++ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+@@ -987,7 +1046,11 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=''
++ if test "$lt_cv_ld_force_load" = "yes"; then
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
++ else
++ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
++ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ case $cc_basename in
+@@ -995,7 +1058,7 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+- output_verbose_link_cmd=echo
++ output_verbose_link_cmd=func_echo_all
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+@@ -1011,203 +1074,142 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
+ fi
+ ])
+
+-# _LT_SYS_MODULE_PATH_AIX
+-# -----------------------
++# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
++# ----------------------------------
+ # Links a minimal program and checks the executable
+ # for the system default hardcoded library path. In most cases,
+ # this is /usr/lib:/lib, but when the MPI compilers are used
+ # the location of the communication and MPI libs are included too.
+ # If we don't find anything, use the default library path according
+ # to the aix ld manual.
++# Store the results from the different compilers for each TAGNAME.
++# Allow to override them for all tags through lt_cv_aix_libpath.
+ m4_defun([_LT_SYS_MODULE_PATH_AIX],
+ [m4_require([_LT_DECL_SED])dnl
+-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi],[])
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++if test "${lt_cv_aix_libpath+set}" = set; then
++ aix_libpath=$lt_cv_aix_libpath
++else
++ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
++ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
++ lt_aix_libpath_sed='[
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\([^ ]*\) *$/\1/
++ p
++ }
++ }]'
++ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ # Check for a 64-bit object if we didn't find anything.
++ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
++ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ fi],[])
++ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
++ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
++ fi
++ ])
++ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
++fi
+ ])# _LT_SYS_MODULE_PATH_AIX
+
+
+ # _LT_SHELL_INIT(ARG)
+ # -------------------
+ m4_define([_LT_SHELL_INIT],
+-[ifdef([AC_DIVERSION_NOTICE],
+- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+- [AC_DIVERT_PUSH(NOTICE)])
+-$1
+-AC_DIVERT_POP
+-])# _LT_SHELL_INIT
++[m4_divert_text([M4SH-INIT], [$1
++])])# _LT_SHELL_INIT
++
+
+
+ # _LT_PROG_ECHO_BACKSLASH
+ # -----------------------
+-# Add some code to the start of the generated configure script which
+-# will find an echo command which doesn't interpret backslashes.
++# Find how we can fake an echo command that does not interpret backslash.
++# In particular, with Autoconf 2.60 or later we add some code to the start
++# of the generated configure script which will find a shell with a builtin
++# printf (which we can use as an echo command).
+ m4_defun([_LT_PROG_ECHO_BACKSLASH],
+-[_LT_SHELL_INIT([
+-# Check that we are running under the correct shell.
+-SHELL=${CONFIG_SHELL-/bin/sh}
+-
+-case X$lt_ECHO in
+-X*--fallback-echo)
+- # Remove one level of quotation (which was required for Make).
+- ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+- ;;
+-esac
+-
+-ECHO=${lt_ECHO-echo}
+-if test "X[$]1" = X--no-reexec; then
+- # Discard the --no-reexec flag, and continue.
+- shift
+-elif test "X[$]1" = X--fallback-echo; then
+- # Avoid inline document here, it may be left over
+- :
+-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+- # Yippee, $ECHO works!
+- :
++[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
++ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
++
++AC_MSG_CHECKING([how to print strings])
++# Test print first, because it will be a builtin if present.
++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
++ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
++ ECHO='print -r --'
++elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
++ ECHO='printf %s\n'
+ else
+- # Restart under the correct shell.
+- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+-fi
+-
+-if test "X[$]1" = X--fallback-echo; then
+- # used as fallback echo
+- shift
+- cat <<_LT_EOF
+-[$]*
+-_LT_EOF
+- exit 0
++ # Use this function as a fallback that always works.
++ func_fallback_echo ()
++ {
++ eval 'cat <<_LTECHO_EOF
++$[]1
++_LTECHO_EOF'
++ }
++ ECHO='func_fallback_echo'
+ fi
+
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+-
+-if test -z "$lt_ECHO"; then
+- if test "X${echo_test_string+set}" != Xset; then
+- # find a string as large as possible, as long as the shell can cope with it
+- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+- if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+- { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+- then
+- break
+- fi
+- done
+- fi
+-
+- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- :
+- else
+- # The Solaris, AIX, and Digital Unix default echo programs unquote
+- # backslashes. This makes it impossible to quote backslashes using
+- # echo "$something" | sed 's/\\/\\\\/g'
+- #
+- # So, first we look for a working echo in the user's PATH.
+-
+- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+- for dir in $PATH /usr/ucb; do
+- IFS="$lt_save_ifs"
+- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- ECHO="$dir/echo"
+- break
+- fi
+- done
+- IFS="$lt_save_ifs"
+-
+- if test "X$ECHO" = Xecho; then
+- # We didn't find a better echo, so look for alternatives.
+- if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- # This shell has a builtin print -r that does the trick.
+- ECHO='print -r'
+- elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+- test "X$CONFIG_SHELL" != X/bin/ksh; then
+- # If we have ksh, try running configure again with it.
+- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+- export ORIGINAL_CONFIG_SHELL
+- CONFIG_SHELL=/bin/ksh
+- export CONFIG_SHELL
+- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+- else
+- # Try using printf.
+- ECHO='printf %s\n'
+- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- # Cool, printf works
+- :
+- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+- test "X$echo_testing_string" = 'X\t' &&
+- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+- export CONFIG_SHELL
+- SHELL="$CONFIG_SHELL"
+- export SHELL
+- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+- test "X$echo_testing_string" = 'X\t' &&
+- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+- else
+- # maybe with a smaller string...
+- prev=:
+-
+- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+- if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+- then
+- break
+- fi
+- prev="$cmd"
+- done
++# func_echo_all arg...
++# Invoke $ECHO with all args, space-separated.
++func_echo_all ()
++{
++ $ECHO "$*"
++}
+
+- if test "$prev" != 'sed 50q "[$]0"'; then
+- echo_test_string=`eval $prev`
+- export echo_test_string
+- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+- else
+- # Oops. We lost completely, so just stick with echo.
+- ECHO=echo
+- fi
+- fi
+- fi
+- fi
+- fi
+-fi
++case "$ECHO" in
++ printf*) AC_MSG_RESULT([printf]) ;;
++ print*) AC_MSG_RESULT([print -r]) ;;
++ *) AC_MSG_RESULT([cat]) ;;
++esac
+
+-# Copy echo and quote the copy suitably for passing to libtool from
+-# the Makefile, instead of quoting the original, which is used later.
+-lt_ECHO=$ECHO
+-if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+- lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+-fi
++m4_ifdef([_AS_DETECT_SUGGESTED],
++[_AS_DETECT_SUGGESTED([
++ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
++ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
++ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
++ PATH=/empty FPATH=/empty; export PATH FPATH
++ test "X`printf %s $ECHO`" = "X$ECHO" \
++ || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+
+-AC_SUBST(lt_ECHO)
+-])
+ _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+-_LT_DECL([], [ECHO], [1],
+- [An echo program that does not interpret backslashes])
++_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+ ])# _LT_PROG_ECHO_BACKSLASH
+
+
++# _LT_WITH_SYSROOT
++# ----------------
++AC_DEFUN([_LT_WITH_SYSROOT],
++[AC_MSG_CHECKING([for sysroot])
++AC_ARG_WITH([sysroot],
++[ --with-sysroot[=DIR] Search for dependent libraries within DIR
++ (or the compiler's sysroot if not specified).],
++[], [with_sysroot=no])
++
++dnl lt_sysroot will always be passed unquoted. We quote it here
++dnl in case the user passed a directory name.
++lt_sysroot=
++case ${with_sysroot} in #(
++ yes)
++ if test "$GCC" = yes; then
++ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
++ fi
++ ;; #(
++ /*)
++ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
++ ;; #(
++ no|'')
++ ;; #(
++ *)
++ AC_MSG_RESULT([${with_sysroot}])
++ AC_MSG_ERROR([The sysroot must be an absolute path.])
++ ;;
++esac
++
++ AC_MSG_RESULT([${lt_sysroot:-no}])
++_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
++[dependent libraries, and in which our libraries should be installed.])])
++
+ # _LT_ENABLE_LOCK
+ # ---------------
+ m4_defun([_LT_ENABLE_LOCK],
+@@ -1236,7 +1238,7 @@ ia64-*-hpux*)
+ ;;
+ *-*-irix6*)
+ # Find out which ABI we are using.
+- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
++ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+@@ -1354,14 +1356,47 @@ need_locks="$enable_libtool_lock"
+ ])# _LT_ENABLE_LOCK
+
+
++# _LT_PROG_AR
++# -----------
++m4_defun([_LT_PROG_AR],
++[AC_CHECK_TOOLS(AR, [ar], false)
++: ${AR=ar}
++: ${AR_FLAGS=cru}
++_LT_DECL([], [AR], [1], [The archiver])
++_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
++
++AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
++ [lt_cv_ar_at_file=no
++ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
++ [echo conftest.$ac_objext > conftest.lst
++ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
++ AC_TRY_EVAL([lt_ar_try])
++ if test "$ac_status" -eq 0; then
++ # Ensure the archiver fails upon bogus file names.
++ rm -f conftest.$ac_objext libconftest.a
++ AC_TRY_EVAL([lt_ar_try])
++ if test "$ac_status" -ne 0; then
++ lt_cv_ar_at_file=@
++ fi
++ fi
++ rm -f conftest.* libconftest.a
++ ])
++ ])
++
++if test "x$lt_cv_ar_at_file" = xno; then
++ archiver_list_spec=
++else
++ archiver_list_spec=$lt_cv_ar_at_file
++fi
++_LT_DECL([], [archiver_list_spec], [1],
++ [How to feed a file listing to the archiver])
++])# _LT_PROG_AR
++
++
+ # _LT_CMD_OLD_ARCHIVE
+ # -------------------
+ m4_defun([_LT_CMD_OLD_ARCHIVE],
+-[AC_CHECK_TOOL(AR, ar, false)
+-test -z "$AR" && AR=ar
+-test -z "$AR_FLAGS" && AR_FLAGS=cru
+-_LT_DECL([], [AR], [1], [The archiver])
+-_LT_DECL([], [AR_FLAGS], [1])
++[_LT_PROG_AR
+
+ AC_CHECK_TOOL(STRIP, strip, :)
+ test -z "$STRIP" && STRIP=:
+@@ -1388,10 +1423,19 @@ if test -n "$RANLIB"; then
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+ fi
++
++case $host_os in
++ darwin*)
++ lock_old_archive_extraction=yes ;;
++ *)
++ lock_old_archive_extraction=no ;;
++esac
+ _LT_DECL([], [old_postinstall_cmds], [2])
+ _LT_DECL([], [old_postuninstall_cmds], [2])
+ _LT_TAGDECL([], [old_archive_cmds], [2],
+ [Commands used to build an old-style archive])
++_LT_DECL([], [lock_old_archive_extraction], [0],
++ [Whether to use a lock for old archive extraction])
+ ])# _LT_CMD_OLD_ARCHIVE
+
+
+@@ -1416,15 +1460,15 @@ AC_CACHE_CHECK([$1], [$2],
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+@@ -1464,7 +1508,7 @@ AC_CACHE_CHECK([$1], [$2],
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&AS_MESSAGE_LOG_FD
+- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
++ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+@@ -1527,6 +1571,11 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [d
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
++ mint*)
++ # On MiNT this can take a long time and run out of memory.
++ lt_cv_sys_max_cmd_len=8192;
++ ;;
++
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+@@ -1591,8 +1640,8 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [d
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+- while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+- = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
++ while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
++ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+@@ -1643,7 +1692,7 @@ else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+-[#line __oline__ "configure"
++[#line $LINENO "configure"
+ #include "confdefs.h"
+
+ #if HAVE_DLFCN_H
+@@ -1684,7 +1733,13 @@ else
+ # endif
+ #endif
+
+-void fnord() { int i=42;}
++/* When -fvisbility=hidden is used, assume the code has been annotated
++ correspondingly for the symbols needed. */
++#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
++int fnord () __attribute__((visibility("default")));
++#endif
++
++int fnord () { return 42; }
+ int main ()
+ {
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+@@ -1693,7 +1748,11 @@ int main ()
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++ else
++ {
++ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++ else puts (dlerror ());
++ }
+ /* dlclose (self); */
+ }
+ else
+@@ -1869,16 +1928,16 @@ AC_CACHE_CHECK([if $compiler supports -c
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&AS_MESSAGE_LOG_FD
+- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
++ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+@@ -2037,6 +2096,7 @@ m4_require([_LT_DECL_EGREP])dnl
+ m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_DECL_OBJDUMP])dnl
+ m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+ AC_MSG_CHECKING([dynamic linker characteristics])
+ m4_if([$1],
+ [], [
+@@ -2045,16 +2105,23 @@ if test "$GCC" = yes; then
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+- if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
++ case $host_os in
++ mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
++ *) lt_sed_strip_eq="s,=/,/,g" ;;
++ esac
++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
++ case $lt_search_path_spec in
++ *\;*)
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+- else
+- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+- fi
++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
++ ;;
++ *)
++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
++ ;;
++ esac
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+@@ -2067,7 +2134,7 @@ if test "$GCC" = yes; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+- lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
++ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+ BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+@@ -2087,7 +2154,13 @@ BEGIN {RS=" "; FS="/|\n";} {
+ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+ }'`
+- sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
++ # AWK program above erroneously prepends '/' to C:/dos/paths
++ # for these hosts.
++ case $host_os in
++ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
++ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
++ esac
++ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+ else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ fi])
+@@ -2175,7 +2248,7 @@ amigaos*)
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+@@ -2206,8 +2279,9 @@ cygwin* | mingw* | pw32* | cegcc*)
+ need_version=no
+ need_lib_prefix=no
+
+- case $GCC,$host_os in
+- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
++ case $GCC,$cc_basename in
++ yes,*)
++ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+@@ -2228,36 +2302,83 @@ cygwin* | mingw* | pw32* | cegcc*)
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
++m4_if([$1], [],[
++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+- if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+- # It is most probably a Windows format PATH printed by
+- # mingw gcc, but we are running on Cygwin. Gcc prints its search
+- # path with ; separators, and with drive letters. We can handle the
+- # drive letters (cygwin fileutils understands them), so leave them,
+- # especially as we might pass files found there to a mingw objdump,
+- # which wouldn't understand a cygwinified path. Ahh.
+- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+- else
+- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+- fi
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
++ dynamic_linker='Win32 ld.exe'
++ ;;
++
++ *,cl*)
++ # Native MSVC
++ libname_spec='$name'
++ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++ library_names_spec='${libname}.dll.lib'
++
++ case $build_os in
++ mingw*)
++ sys_lib_search_path_spec=
++ lt_save_ifs=$IFS
++ IFS=';'
++ for lt_path in $LIB
++ do
++ IFS=$lt_save_ifs
++ # Let DOS variable expansion print the short 8.3 style file name.
++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
++ done
++ IFS=$lt_save_ifs
++ # Convert to MSYS style.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
++ ;;
++ cygwin*)
++ # Convert to unix form, then to dos form, then back to unix form
++ # but this time dos style (no spaces!) so that the unix form looks
++ # like /cygdrive/c/PROGRA~1:/cygdr...
++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ ;;
++ *)
++ sys_lib_search_path_spec="$LIB"
++ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
++ # It is most probably a Windows format PATH.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++ else
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ fi
++ # FIXME: find the short name or the path components, as spaces are
++ # common. (e.g. "Program Files" -> "PROGRA~1")
++ ;;
++ esac
++
++ # DLL is installed to $(libdir)/../bin by postinstall_cmds
++ postinstall_cmds='base_file=`basename \${file}`~
++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++ dldir=$destdir/`dirname \$dlpath`~
++ test -d \$dldir || mkdir -p \$dldir~
++ $install_prog $dir/$dlname \$dldir/$dlname'
++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++ dlpath=$dir/\$dldll~
++ $RM \$dlpath'
++ shlibpath_overrides_runpath=yes
++ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
++ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
++ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+- dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+@@ -2344,6 +2465,19 @@ gnu*)
+ hardcode_into_libs=yes
+ ;;
+
++haiku*)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ dynamic_linker="$host_os runtime_loader"
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
++ hardcode_into_libs=yes
++ ;;
++
+ hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+@@ -2386,8 +2520,10 @@ hpux9* | hpux10* | hpux11*)
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+- # HP-UX runs *really* slowly unless shared libraries are mode 555.
++ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
++ # or fails outright, so override atomically:
++ install_override_mode=555
+ ;;
+
+ interix[[3-9]]*)
+@@ -2454,16 +2590,21 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
++
+ # Some binutils ld are patched to set DT_RUNPATH
+- save_LDFLAGS=$LDFLAGS
+- save_libdir=$libdir
+- eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+- LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+- [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+- [shlibpath_overrides_runpath=yes])])
+- LDFLAGS=$save_LDFLAGS
+- libdir=$save_libdir
++ AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
++ [lt_cv_shlibpath_overrides_runpath=no
++ save_LDFLAGS=$LDFLAGS
++ save_libdir=$libdir
++ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
++ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
++ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
++ [lt_cv_shlibpath_overrides_runpath=yes])])
++ LDFLAGS=$save_LDFLAGS
++ libdir=$save_libdir
++ ])
++ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+@@ -2472,7 +2613,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+@@ -2485,18 +2626,6 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+-netbsdelf*-gnu)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=no
+- hardcode_into_libs=yes
+- dynamic_linker='NetBSD ld.elf_so'
+- ;;
+-
+ netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+@@ -2717,6 +2846,8 @@ _LT_DECL([], [library_names_spec], [1],
+ The last name is the one that the linker finds with -lNAME]])
+ _LT_DECL([], [soname_spec], [1],
+ [[The coded name of the library, if different from the real name]])
++_LT_DECL([], [install_override_mode], [1],
++ [Permission mode override for installation of shared libraries])
+ _LT_DECL([], [postinstall_cmds], [2],
+ [Command to use after installation of a shared archive])
+ _LT_DECL([], [postuninstall_cmds], [2],
+@@ -2829,6 +2960,7 @@ AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ m4_require([_LT_DECL_SED])dnl
+ m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
+
+ AC_ARG_WITH([gnu-ld],
+ [AS_HELP_STRING([--with-gnu-ld],
+@@ -2950,6 +3082,11 @@ case $reload_flag in
+ esac
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ case $host_os in
++ cygwin* | mingw* | pw32* | cegcc*)
++ if test "$GCC" != yes; then
++ reload_cmds=false
++ fi
++ ;;
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+@@ -2958,8 +3095,8 @@ case $host_os in
+ fi
+ ;;
+ esac
+-_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+-_LT_DECL([], [reload_cmds], [2])dnl
++_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
++_LT_TAGDECL([], [reload_cmds], [2])dnl
+ ])# _LT_CMD_RELOAD
+
+
+@@ -3011,16 +3148,18 @@ mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+- if ( file / ) >/dev/null 2>&1; then
++ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
++ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
++ # Keep this pattern in sync with the one in func_win32_libid.
++ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+-cegcc)
++cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+@@ -3050,6 +3189,10 @@ gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
++haiku*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
+ hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+@@ -3058,11 +3201,11 @@ hpux10.20* | hpux11*)
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
++ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+@@ -3088,7 +3231,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+-netbsd* | netbsdelf*-gnu)
++netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ else
+@@ -3162,6 +3305,21 @@ tpf*)
+ ;;
+ esac
+ ])
++
++file_magic_glob=
++want_nocaseglob=no
++if test "$build" = "$host"; then
++ case $host_os in
++ mingw* | pw32*)
++ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
++ want_nocaseglob=yes
++ else
++ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
++ fi
++ ;;
++ esac
++fi
++
+ file_magic_cmd=$lt_cv_file_magic_cmd
+ deplibs_check_method=$lt_cv_deplibs_check_method
+ test -z "$deplibs_check_method" && deplibs_check_method=unknown
+@@ -3169,7 +3327,11 @@ test -z "$deplibs_check_method" && depli
+ _LT_DECL([], [deplibs_check_method], [1],
+ [Method to check whether dependent libraries are shared objects])
+ _LT_DECL([], [file_magic_cmd], [1],
+- [Command to use when deplibs_check_method == "file_magic"])
++ [Command to use when deplibs_check_method = "file_magic"])
++_LT_DECL([], [file_magic_glob], [1],
++ [How to find potential files when deplibs_check_method = "file_magic"])
++_LT_DECL([], [want_nocaseglob], [1],
++ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+ ])# _LT_CHECK_MAGIC_METHOD
+
+
+@@ -3226,7 +3388,19 @@ if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+ else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+- AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
++ if test -n "$DUMPBIN"; then :
++ # Let the user override the test.
++ else
++ AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
++ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
++ *COFF*)
++ DUMPBIN="$DUMPBIN -symbols"
++ ;;
++ *)
++ DUMPBIN=:
++ ;;
++ esac
++ fi
+ AC_SUBST([DUMPBIN])
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+@@ -3239,13 +3413,13 @@ _LT_DECL([], [NM], [1], [A BSD- or MS-co
+ AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+ [lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+- (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
++ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+- (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
++ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+- (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
++ (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+ cat conftest.out >&AS_MESSAGE_LOG_FD
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+@@ -3260,23 +3434,84 @@ dnl aclocal-1.4 backwards compatibility:
+ dnl AC_DEFUN([AM_PROG_NM], [])
+ dnl AC_DEFUN([AC_PROG_NM], [])
+
++# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
++# --------------------------------
++# how to determine the name of the shared library
++# associated with a specific link library.
++# -- PORTME fill in with the dynamic library characteristics
++m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
++[m4_require([_LT_DECL_EGREP])
++m4_require([_LT_DECL_OBJDUMP])
++m4_require([_LT_DECL_DLLTOOL])
++AC_CACHE_CHECK([how to associate runtime and link libraries],
++lt_cv_sharedlib_from_linklib_cmd,
++[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+-# LT_LIB_M
+-# --------
+-# check for math library
+-AC_DEFUN([LT_LIB_M],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-LIBM=
+-case $host in
+-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+- # These system don't have libm, or don't need it
+- ;;
+-*-ncr-sysv4.3*)
+- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
++case $host_os in
++cygwin* | mingw* | pw32* | cegcc*)
++ # two different shell functions defined in ltmain.sh
++ # decide which to use based on capabilities of $DLLTOOL
++ case `$DLLTOOL --help 2>&1` in
++ *--identify-strict*)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
++ ;;
++ *)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
++ ;;
++ esac
+ ;;
+ *)
+- AC_CHECK_LIB(m, cos, LIBM="-lm")
++ # fallback: assume linklib IS sharedlib
++ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
++ ;;
++esac
++])
++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
++
++_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
++ [Command to associate shared and link libraries])
++])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
++
++
++# _LT_PATH_MANIFEST_TOOL
++# ----------------------
++# locate the manifest tool
++m4_defun([_LT_PATH_MANIFEST_TOOL],
++[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
++AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
++ [lt_cv_path_mainfest_tool=no
++ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
++ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
++ lt_cv_path_mainfest_tool=yes
++ fi
++ rm -f conftest*])
++if test "x$lt_cv_path_mainfest_tool" != xyes; then
++ MANIFEST_TOOL=:
++fi
++_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
++])# _LT_PATH_MANIFEST_TOOL
++
++
++# LT_LIB_M
++# --------
++# check for math library
++AC_DEFUN([LT_LIB_M],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++LIBM=
++case $host in
++*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
++ # These system don't have libm, or don't need it
++ ;;
++*-ncr-sysv4.3*)
++ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
++ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
++ ;;
++*)
++ AC_CHECK_LIB(m, cos, LIBM="-lm")
+ ;;
+ esac
+ AC_SUBST([LIBM])
+@@ -3296,7 +3531,12 @@ m4_defun([_LT_COMPILER_NO_RTTI],
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+ if test "$GCC" = yes; then
+- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
++ case $cc_basename in
++ nvcc*)
++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
++ *)
++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
++ esac
+
+ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+ lt_cv_prog_compiler_rtti_exceptions,
+@@ -3313,6 +3553,7 @@ _LT_TAGDECL([no_builtin_flag], [lt_prog_
+ m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+ [AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([AC_PROG_AWK])dnl
+ AC_REQUIRE([LT_PATH_NM])dnl
+ AC_REQUIRE([LT_PATH_LD])dnl
+ m4_require([_LT_DECL_SED])dnl
+@@ -3380,8 +3621,8 @@ esac
+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+ # Transform an extracted symbol line into symbol name and symbol address
+-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
+-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+ # Handle CRLF in mingw tool chain
+ opt_cr=
+@@ -3417,6 +3658,7 @@ for ac_symprfx in "" "_"; do
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
++ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+@@ -3438,7 +3680,7 @@ _LT_EOF
+ if AC_TRY_EVAL(ac_compile); then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
++ if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+@@ -3450,6 +3692,18 @@ _LT_EOF
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
++/* DATA imports from DLLs on WIN32 con't be const, because runtime
++ relocations are performed -- see ld's documentation on pseudo-relocs. */
++# define LT@&t@_DLSYM_CONST
++#elif defined(__osf__)
++/* This system does not cope well with relocations in const data. */
++# define LT@&t@_DLSYM_CONST
++#else
++# define LT@&t@_DLSYM_CONST const
++#endif
++
+ #ifdef __cplusplus
+ extern "C" {
+ #endif
+@@ -3461,7 +3715,7 @@ _LT_EOF
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+ /* The mapping between symbol names and symbols. */
+-const struct {
++LT@&t@_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+ }
+@@ -3487,15 +3741,15 @@ static const void *lt_preloaded_setup()
+ _LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+- lt_save_LIBS="$LIBS"
+- lt_save_CFLAGS="$CFLAGS"
++ lt_globsym_save_LIBS=$LIBS
++ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+- LIBS="$lt_save_LIBS"
+- CFLAGS="$lt_save_CFLAGS"
++ LIBS=$lt_globsym_save_LIBS
++ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+@@ -3528,6 +3782,13 @@ else
+ AC_MSG_RESULT(ok)
+ fi
+
++# Response file support.
++if test "$lt_cv_nm_interface" = "MS dumpbin"; then
++ nm_file_list_spec='@'
++elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
++ nm_file_list_spec='@'
++fi
++
+ _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+ [Take the output of nm and produce a listing of raw symbols and C names])
+ _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+@@ -3538,6 +3799,8 @@ _LT_DECL([global_symbol_to_c_name_addres
+ _LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+ [Transform the output of nm in a C name address pair when lib prefix is needed])
++_LT_DECL([], [nm_file_list_spec], [1],
++ [Specify filename containing input files for $NM])
+ ]) # _LT_CMD_GLOBAL_SYMBOLS
+
+
+@@ -3549,7 +3812,6 @@ _LT_TAGVAR(lt_prog_compiler_wl, $1)=
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+-AC_MSG_CHECKING([for $compiler option to produce PIC])
+ m4_if([$1], [CXX], [
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+@@ -3600,6 +3862,11 @@ m4_if([$1], [CXX], [
+ # DJGPP does not support shared libraries at all
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
++ haiku*)
++ # PIC is the default for Haiku.
++ # The "-static" flag exists, but is broken.
++ _LT_TAGVAR(lt_prog_compiler_static, $1)=
++ ;;
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+@@ -3649,6 +3916,12 @@ m4_if([$1], [CXX], [
+ ;;
+ esac
+ ;;
++ mingw* | cygwin* | os2* | pw32* | cegcc*)
++ # This hack is so that the source file can tell whether it is being
++ # built for inclusion in a dll (and should export symbols for example).
++ m4_if([$1], [GCJ], [],
++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+@@ -3738,8 +4011,8 @@ m4_if([$1], [CXX], [
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+- xlc* | xlC*)
+- # IBM XL 8.0 on PPC
++ xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
++ # IBM XL 8.0, 9.0 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+@@ -3769,7 +4042,7 @@ m4_if([$1], [CXX], [
+ ;;
+ esac
+ ;;
+- netbsd* | netbsdelf*-gnu)
++ netbsd*)
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+@@ -3801,7 +4074,7 @@ m4_if([$1], [CXX], [
+ ;;
+ solaris*)
+ case $cc_basename in
+- CC*)
++ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+@@ -3905,6 +4178,12 @@ m4_if([$1], [CXX], [
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+
++ haiku*)
++ # PIC is the default for Haiku.
++ # The "-static" flag exists, but is broken.
++ _LT_TAGVAR(lt_prog_compiler_static, $1)=
++ ;;
++
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+@@ -3947,6 +4226,13 @@ m4_if([$1], [CXX], [
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
++
++ case $cc_basename in
++ nvcc*) # Cuda Compiler Driver 2.2
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC'
++ ;;
++ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+@@ -4010,7 +4296,13 @@ m4_if([$1], [CXX], [
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+ ;;
+- pgcc* | pgf77* | pgf90* | pgf95*)
++ nagfor*)
++ # NAG Fortran compiler
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+@@ -4022,25 +4314,25 @@ m4_if([$1], [CXX], [
+ # All Alpha code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+- xl*)
+- # IBM XL C 8.0/Fortran 10.1 on PPC
++ xl* | bgxl* | bgf* | mpixl*)
++ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*)
+- # Sun C 5.9
++ *Sun\ F* | *Sun*Fortran*)
++ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+ ;;
+- *Sun\ F*)
+- # Sun Fortran 8.3 passes all unrecognized flags to the linker
++ *Sun\ C*)
++ # Sun C 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ ;;
+ esac
+ ;;
+@@ -4072,7 +4364,7 @@ m4_if([$1], [CXX], [
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ case $cc_basename in
+- f77* | f90* | f95*)
++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+@@ -4129,9 +4421,11 @@ case $host_os in
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+ ;;
+ esac
+-AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+- [How to pass a linker flag through the compiler])
++
++AC_CACHE_CHECK([for $compiler option to produce PIC],
++ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
++ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
++_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
+ #
+ # Check to make sure the PIC flag actually works.
+@@ -4150,6 +4444,8 @@ fi
+ _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+ [Additional compiler flags for building library objects])
+
++_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
++ [How to pass a linker flag through the compiler])
+ #
+ # Check to make sure the static flag actually works.
+ #
+@@ -4170,6 +4466,7 @@ _LT_TAGDECL([link_static_flag], [lt_prog
+ m4_defun([_LT_LINKER_SHLIBS],
+ [AC_REQUIRE([LT_PATH_LD])dnl
+ AC_REQUIRE([LT_PATH_NM])dnl
++m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+ m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_DECL_EGREP])dnl
+ m4_require([_LT_DECL_SED])dnl
+@@ -4178,30 +4475,35 @@ m4_require([_LT_TAG_COMPILER])dnl
+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ m4_if([$1], [CXX], [
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ case $host_os in
+ aix[[4-9]]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
++ # Also, AIX nm treats weak defined symbols like other global defined
++ # symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ ;;
+ pw32*)
+ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+- ;;
++ ;;
+ cygwin* | mingw* | cegcc*)
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+- ;;
+- linux* | k*bsd*-gnu)
+- _LT_TAGVAR(link_all_deplibs, $1)=no
+- ;;
++ case $cc_basename in
++ cl*) ;;
++ *)
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
++ ;;
++ esac
++ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+- ;;
++ ;;
+ esac
+- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ ], [
+ runpath_var=
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+@@ -4261,13 +4563,36 @@ dnl Note also adjust exclude_expsyms for
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+- linux* | k*bsd*-gnu)
+- _LT_TAGVAR(link_all_deplibs, $1)=no
+- ;;
+ esac
+
+ _LT_TAGVAR(ld_shlibs, $1)=yes
++
++ # On some targets, GNU ld is compatible enough with the native linker
++ # that we're better off using the native interface for both.
++ lt_use_gnu_ld_interface=no
+ if test "$with_gnu_ld" = yes; then
++ case $host_os in
++ aix*)
++ # The AIX port of GNU ld has always aspired to compatibility
++ # with the native linker. However, as the warning in the GNU ld
++ # block says, versions before 2.19.5* couldn't really create working
++ # shared libraries, regardless of the interface used.
++ case `$LD -v 2>&1` in
++ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
++ *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
++ *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
++ *)
++ lt_use_gnu_ld_interface=yes
++ ;;
++ esac
++ ;;
++ *)
++ lt_use_gnu_ld_interface=yes
++ ;;
++ esac
++ fi
++
++ if test "$lt_use_gnu_ld_interface" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+@@ -4301,11 +4626,12 @@ dnl Note also adjust exclude_expsyms for
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
++*** Warning: the GNU linker, at least up to release 2.19, is reported
+ *** to be unable to reliably create shared libraries on AIX.
+ *** Therefore, libtool is disabling shared libraries support. If you
+-*** really care for shared libraries, you may want to modify your PATH
+-*** so that a non-GNU linker is found, and then restart.
++*** really care for shared libraries, you may want to install binutils
++*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
++*** You will then need to restart the configuration process.
+
+ _LT_EOF
+ fi
+@@ -4341,10 +4667,12 @@ _LT_EOF
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+@@ -4362,6 +4690,11 @@ _LT_EOF
+ fi
+ ;;
+
++ haiku*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ ;;
++
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+@@ -4387,15 +4720,16 @@ _LT_EOF
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+- tmp_addflag=
++ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ pgf77* | pgf90* | pgf95* | pgfortran*)
++ # Portland Group f77 and f90 compilers
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+@@ -4406,13 +4740,17 @@ _LT_EOF
+ lf95*) # Lahey Fortran 8.1
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ tmp_sharedflag='--shared' ;;
+- xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
++ xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
++ nvcc*) # Cuda Compiler Driver 2.2
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(compiler_needs_object, $1)=yes
++ ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+@@ -4428,17 +4766,17 @@ _LT_EOF
+ fi
+
+ case $cc_basename in
+- xlf*)
++ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+- _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+@@ -4447,13 +4785,13 @@ _LT_EOF
+ fi
+ ;;
+
+- netbsd* | netbsdelf*-gnu)
++ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+@@ -4471,8 +4809,8 @@ _LT_EOF
+
+ _LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+@@ -4518,8 +4856,8 @@ _LT_EOF
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+@@ -4559,8 +4897,10 @@ _LT_EOF
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
++ # Also, AIX nm treats weak defined symbols like other global
++ # defined symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+@@ -4622,7 +4962,6 @@ _LT_EOF
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+- _LT_TAGVAR(link_all_deplibs, $1)=no
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+@@ -4648,9 +4987,9 @@ _LT_EOF
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
++ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+@@ -4659,14 +4998,19 @@ _LT_EOF
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
++ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+- # Exported symbols can be pulled into shared objects from archives
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++ if test "$with_gnu_ld" = yes; then
++ # We only use this code for GNU lds that support --whole-archive.
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++ else
++ # Exported symbols can be pulled into shared objects from archives
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+@@ -4698,20 +5042,63 @@ _LT_EOF
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- # Tell ltmain to make .lib files, not .a files.
+- libext=lib
+- # Tell ltmain to make .dll files, not .so files.
+- shrext_cmds=".dll"
+- # FIXME: Setting linknames here is a bad hack.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+- # The linker will automatically build a .lib file if we build a DLL.
+- _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+- # FIXME: Should let the user specify the lib program.
+- _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+- _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ case $cc_basename in
++ cl*)
++ # Native MSVC
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=yes
++ _LT_TAGVAR(file_list_spec, $1)='@'
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++ else
++ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++ fi~
++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++ linknames='
++ # The linker will not automatically build a static lib if we build a DLL.
++ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++ # Don't use ranlib
++ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
++ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
++ lt_tool_outputfile="@TOOL_OUTPUT@"~
++ case $lt_outputfile in
++ *.exe|*.EXE) ;;
++ *)
++ lt_outputfile="$lt_outputfile.exe"
++ lt_tool_outputfile="$lt_tool_outputfile.exe"
++ ;;
++ esac~
++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++ $RM "$lt_outputfile.manifest";
++ fi'
++ ;;
++ *)
++ # Assume MSVC wrapper
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
++ # The linker will automatically build a .lib file if we build a DLL.
++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++ # FIXME: Should let the user specify the lib program.
++ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ ;;
++ esac
+ ;;
+
+ darwin* | rhapsody*)
+@@ -4749,7 +5136,7 @@ _LT_EOF
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+@@ -4757,7 +5144,7 @@ _LT_EOF
+
+ hpux9*)
+ if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+@@ -4772,8 +5159,8 @@ _LT_EOF
+ ;;
+
+ hpux10*)
+- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+@@ -4791,16 +5178,16 @@ _LT_EOF
+ ;;
+
+ hpux11*)
+- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+@@ -4812,7 +5199,14 @@ _LT_EOF
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ m4_if($1, [], [
++ # Older versions of the 11.00 compiler do not understand -b yet
++ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
++ _LT_LINKER_OPTION([if $CC understands -b],
++ _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
++ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
++ [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
++ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+ ;;
+ esac
+ fi
+@@ -4840,19 +5234,34 @@ _LT_EOF
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+- save_LDFLAGS="$LDFLAGS"
+- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+- AC_LINK_IFELSE(int foo(void) {},
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+- )
+- LDFLAGS="$save_LDFLAGS"
++ # This should be the same for all languages, so no per-tag cache variable.
++ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
++ [lt_cv_irix_exported_symbol],
++ [save_LDFLAGS="$LDFLAGS"
++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
++ AC_LINK_IFELSE(
++ [AC_LANG_SOURCE(
++ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
++ [C++], [[int foo (void) { return 0; }]],
++ [Fortran 77], [[
++ subroutine foo
++ end]],
++ [Fortran], [[
++ subroutine foo
++ end]])])],
++ [lt_cv_irix_exported_symbol=yes],
++ [lt_cv_irix_exported_symbol=no])
++ LDFLAGS="$save_LDFLAGS"])
++ if test "$lt_cv_irix_exported_symbol" = yes; then
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
++ fi
+ else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+@@ -4861,7 +5270,7 @@ _LT_EOF
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+- netbsd* | netbsdelf*-gnu)
++ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+@@ -4914,17 +5323,17 @@ _LT_EOF
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
++ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+@@ -4934,13 +5343,13 @@ _LT_EOF
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
++ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+@@ -4953,9 +5362,9 @@ _LT_EOF
+ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+@@ -5131,36 +5540,38 @@ x|xyes)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+- $RM conftest*
+- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+-
+- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+- soname=conftest
+- lib=conftest
+- libobjs=conftest.$ac_objext
+- deplibs=
+- wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+- pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+- compiler_flags=-v
+- linker_flags=-v
+- verstring=
+- output_objdir=.
+- libname=conftest
+- lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+- _LT_TAGVAR(allow_undefined_flag, $1)=
+- if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+- then
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- else
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+- fi
+- _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+- else
+- cat conftest.err 1>&5
+- fi
+- $RM conftest*
+- AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
++ AC_CACHE_CHECK([whether -lc should be explicitly linked in],
++ [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
++ [$RM conftest*
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
++ soname=conftest
++ lib=conftest
++ libobjs=conftest.$ac_objext
++ deplibs=
++ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
++ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
++ compiler_flags=-v
++ linker_flags=-v
++ verstring=
++ output_objdir=.
++ libname=conftest
++ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
++ _LT_TAGVAR(allow_undefined_flag, $1)=
++ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
++ then
++ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ else
++ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++ fi
++ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
++ else
++ cat conftest.err 1>&5
++ fi
++ $RM conftest*
++ ])
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+ ;;
+ esac
+ fi
+@@ -5225,8 +5636,6 @@ _LT_TAGDECL([], [inherit_rpath], [0],
+ to runtime path list])
+ _LT_TAGDECL([], [link_all_deplibs], [0],
+ [Whether libtool must link a program against all its dependency libraries])
+-_LT_TAGDECL([], [fix_srcfile_path], [1],
+- [Fix the shell variable $srcfile for the compiler])
+ _LT_TAGDECL([], [always_export_symbols], [0],
+ [Set to "yes" if exported symbols are required])
+ _LT_TAGDECL([], [export_symbols_cmds], [2],
+@@ -5237,6 +5646,8 @@ _LT_TAGDECL([], [include_expsyms], [1],
+ [Symbols that must always be exported])
+ _LT_TAGDECL([], [prelink_cmds], [2],
+ [Commands necessary for linking programs (against libraries) with templates])
++_LT_TAGDECL([], [postlink_cmds], [2],
++ [Commands necessary for finishing linking programs])
+ _LT_TAGDECL([], [file_list_spec], [1],
+ [Specify filename containing input files])
+ dnl FIXME: Not yet implemented
+@@ -5330,37 +5741,22 @@ CC="$lt_save_CC"
+ ])# _LT_LANG_C_CONFIG
+
+
+-# _LT_PROG_CXX
+-# ------------
+-# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+-# compiler, we have our own version here.
+-m4_defun([_LT_PROG_CXX],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+-AC_PROG_CXX
+-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+- (test "X$CXX" != "Xg++"))) ; then
+- AC_PROG_CXXCPP
+-else
+- _lt_caught_CXX_error=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_CXX
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_CXX], [])
+-
+-
+ # _LT_LANG_CXX_CONFIG([TAG])
+ # --------------------------
+ # Ensure that the configuration variables for a C++ compiler are suitably
+ # defined. These variables are subsequently used by _LT_CONFIG to write
+ # the compiler configuration to `libtool'.
+ m4_defun([_LT_LANG_CXX_CONFIG],
+-[AC_REQUIRE([_LT_PROG_CXX])dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_PATH_MANIFEST_TOOL])dnl
++if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
++ (test "X$CXX" != "Xg++"))) ; then
++ AC_PROG_CXXCPP
++else
++ _lt_caught_CXX_error=yes
++fi
+
+ AC_LANG_PUSH(C++)
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+@@ -5382,6 +5778,8 @@ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+ _LT_TAGVAR(no_undefined_flag, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+@@ -5413,6 +5811,7 @@ if test "$_lt_caught_CXX_error" != yes;
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
++ lt_save_CFLAGS=$CFLAGS
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+@@ -5430,6 +5829,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
++ CFLAGS=$CXXFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+@@ -5451,8 +5851,8 @@ if test "$_lt_caught_CXX_error" != yes;
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+@@ -5484,7 +5884,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ GXX=no
+@@ -5593,10 +5993,10 @@ if test "$_lt_caught_CXX_error" != yes;
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+- _LT_SYS_MODULE_PATH_AIX
++ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+@@ -5605,14 +6005,19 @@ if test "$_lt_caught_CXX_error" != yes;
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
++ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+- # Exported symbols can be pulled into shared objects from archives
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++ if test "$with_gnu_ld" = yes; then
++ # We only use this code for GNU lds that support --whole-archive.
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++ else
++ # Exported symbols can be pulled into shared objects from archives
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared
+ # libraries.
+@@ -5642,28 +6047,75 @@ if test "$_lt_caught_CXX_error" != yes;
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+- # as there is no search path for DLLs.
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(always_export_symbols, $1)=no
+- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+-
+- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- # If the export-symbols file already is a .def file (1st line
+- # is EXPORTS), use it as is; otherwise, prepend...
+- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+- cp $export_symbols $output_objdir/$soname.def;
+- else
+- echo EXPORTS > $output_objdir/$soname.def;
+- cat $export_symbols >> $output_objdir/$soname.def;
+- fi~
+- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
++ case $GXX,$cc_basename in
++ ,cl* | no,cl*)
++ # Native MSVC
++ # hardcode_libdir_flag_spec is actually meaningless, as there is
++ # no search path for DLLs.
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=yes
++ _LT_TAGVAR(file_list_spec, $1)='@'
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++ else
++ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++ fi~
++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++ linknames='
++ # The linker will not automatically build a static lib if we build a DLL.
++ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ # Don't use ranlib
++ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
++ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
++ lt_tool_outputfile="@TOOL_OUTPUT@"~
++ case $lt_outputfile in
++ *.exe|*.EXE) ;;
++ *)
++ lt_outputfile="$lt_outputfile.exe"
++ lt_tool_outputfile="$lt_tool_outputfile.exe"
++ ;;
++ esac~
++ func_to_tool_file "$lt_outputfile"~
++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++ $RM "$lt_outputfile.manifest";
++ fi'
++ ;;
++ *)
++ # g++
++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
++ # as there is no search path for DLLs.
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=no
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++
++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ # If the export-symbols file already is a .def file (1st line
++ # is EXPORTS), use it as is; otherwise, prepend...
++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ cp $export_symbols $output_objdir/$soname.def;
++ else
++ echo EXPORTS > $output_objdir/$soname.def;
++ cat $export_symbols >> $output_objdir/$soname.def;
++ fi~
++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+@@ -5705,6 +6157,11 @@ if test "$_lt_caught_CXX_error" != yes;
+ gnu*)
+ ;;
+
++ haiku*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ ;;
++
+ hpux9*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+@@ -5729,11 +6186,11 @@ if test "$_lt_caught_CXX_error" != yes;
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+@@ -5794,7 +6251,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+@@ -5804,10 +6261,10 @@ if test "$_lt_caught_CXX_error" != yes;
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+@@ -5837,7 +6294,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ case $cc_basename in
+ CC*)
+ # SGI C++
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+@@ -5848,9 +6305,9 @@ if test "$_lt_caught_CXX_error" != yes;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ fi
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+@@ -5879,7 +6336,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+@@ -5916,26 +6373,26 @@ if test "$_lt_caught_CXX_error" != yes;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+- *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
++ *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
++ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
++ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
+ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+- *) # Version 6 will use weak symbols
++ *) # Version 6 and above use weak symbols
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+@@ -5943,7 +6400,7 @@ if test "$_lt_caught_CXX_error" != yes;
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+@@ -5962,9 +6419,9 @@ if test "$_lt_caught_CXX_error" != yes;
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ ;;
+- xl*)
++ xl* | mpixl* | bgxl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+@@ -5984,13 +6441,13 @@ if test "$_lt_caught_CXX_error" != yes;
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+- output_verbose_link_cmd='echo'
++ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+@@ -6059,7 +6516,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+- output_verbose_link_cmd=echo
++ output_verbose_link_cmd=func_echo_all
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+@@ -6094,15 +6551,15 @@ if test "$_lt_caught_CXX_error" != yes;
+ case $host in
+ osf3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+ $RM $lib.exp'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ ;;
+@@ -6118,17 +6575,17 @@ if test "$_lt_caught_CXX_error" != yes;
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ case $host in
+ osf3*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
+
+@@ -6138,7 +6595,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+@@ -6174,7 +6631,7 @@ if test "$_lt_caught_CXX_error" != yes;
+
+ solaris*)
+ case $cc_basename in
+- CC*)
++ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+@@ -6195,7 +6652,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+- output_verbose_link_cmd='echo'
++ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+@@ -6215,14 +6672,14 @@ if test "$_lt_caught_CXX_error" != yes;
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+@@ -6233,7 +6690,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+- output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ fi
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+@@ -6287,6 +6744,10 @@ if test "$_lt_caught_CXX_error" != yes;
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
++ '"$_LT_TAGVAR(old_archive_cmds, $1)"
++ _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
++ '"$_LT_TAGVAR(reload_cmds, $1)"
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+@@ -6342,6 +6803,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
++ CFLAGS=$lt_save_CFLAGS
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+@@ -6356,6 +6818,29 @@ AC_LANG_POP
+ ])# _LT_LANG_CXX_CONFIG
+
+
++# _LT_FUNC_STRIPNAME_CNF
++# ----------------------
++# func_stripname_cnf prefix suffix name
++# strip PREFIX and SUFFIX off of NAME.
++# PREFIX and SUFFIX must not contain globbing or regex special
++# characters, hashes, percent signs, but SUFFIX may contain a leading
++# dot (in which case that matches only a dot).
++#
++# This function is identical to the (non-XSI) version of func_stripname,
++# except this one can be used by m4 code that may be executed by configure,
++# rather than the libtool script.
++m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
++AC_REQUIRE([_LT_DECL_SED])
++AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
++func_stripname_cnf ()
++{
++ case ${2} in
++ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
++ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
++ esac
++} # func_stripname_cnf
++])# _LT_FUNC_STRIPNAME_CNF
++
+ # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+ # ---------------------------------
+ # Figure out "hidden" library dependencies from verbose
+@@ -6364,6 +6849,7 @@ AC_LANG_POP
+ # objects, libraries and library flags.
+ m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+ [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+ # Dependencies to place before and after the object being linked:
+ _LT_TAGVAR(predep_objects, $1)=
+ _LT_TAGVAR(postdep_objects, $1)=
+@@ -6414,6 +6900,13 @@ public class foo {
+ };
+ _LT_EOF
+ ])
++
++_lt_libdeps_save_CFLAGS=$CFLAGS
++case "$CC $CFLAGS " in #(
++*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
++*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
++esac
++
+ dnl Parse the compiler output and extract the necessary
+ dnl objects, libraries and library flags.
+ if AC_TRY_EVAL(ac_compile); then
+@@ -6425,7 +6918,7 @@ if AC_TRY_EVAL(ac_compile); then
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+- case $p in
++ case ${prev}${p} in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+@@ -6434,13 +6927,22 @@ if AC_TRY_EVAL(ac_compile); then
+ test $p = "-R"; then
+ prev=$p
+ continue
+- else
+- prev=
+ fi
+
++ # Expand the sysroot to ease extracting the directories later.
++ if test -z "$prev"; then
++ case $p in
++ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
++ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
++ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
++ esac
++ fi
++ case $p in
++ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
++ esac
+ if test "$pre_test_object_deps_done" = no; then
+- case $p in
+- -L* | -R*)
++ case ${prev} in
++ -L | -R)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+@@ -6460,8 +6962,10 @@ if AC_TRY_EVAL(ac_compile); then
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ fi
+ fi
++ prev=
+ ;;
+
++ *.lto.$objext) ;; # Ignore GCC LTO objects
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+@@ -6497,6 +7001,7 @@ else
+ fi
+
+ $RM -f confest.$objext
++CFLAGS=$_lt_libdeps_save_CFLAGS
+
+ # PORTME: override above test on systems where it is broken
+ m4_if([$1], [CXX],
+@@ -6533,7 +7038,7 @@ linux*)
+
+ solaris*)
+ case $cc_basename in
+- CC*)
++ CC* | sunCC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+@@ -6577,32 +7082,16 @@ _LT_TAGDECL([], [compiler_lib_search_pat
+ ])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+-# _LT_PROG_F77
+-# ------------
+-# Since AC_PROG_F77 is broken, in that it returns the empty string
+-# if there is no fortran compiler, we have our own version here.
+-m4_defun([_LT_PROG_F77],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+-AC_PROG_F77
+-if test -z "$F77" || test "X$F77" = "Xno"; then
+- _lt_disable_F77=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_F77
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_F77], [])
+-
+-
+ # _LT_LANG_F77_CONFIG([TAG])
+ # --------------------------
+ # Ensure that the configuration variables for a Fortran 77 compiler are
+ # suitably defined. These variables are subsequently used by _LT_CONFIG
+ # to write the compiler configuration to `libtool'.
+ m4_defun([_LT_LANG_F77_CONFIG],
+-[AC_REQUIRE([_LT_PROG_F77])dnl
+-AC_LANG_PUSH(Fortran 77)
++[AC_LANG_PUSH(Fortran 77)
++if test -z "$F77" || test "X$F77" = "Xno"; then
++ _lt_disable_F77=yes
++fi
+
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+@@ -6621,6 +7110,8 @@ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+ _LT_TAGVAR(no_undefined_flag, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+@@ -6660,7 +7151,9 @@ if test "$_lt_disable_F77" != yes; then
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
++ lt_save_CFLAGS=$CFLAGS
+ CC=${F77-"f77"}
++ CFLAGS=$FFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+@@ -6714,38 +7207,24 @@ if test "$_lt_disable_F77" != yes; then
+
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
++ CFLAGS="$lt_save_CFLAGS"
+ fi # test "$_lt_disable_F77" != yes
+
+ AC_LANG_POP
+ ])# _LT_LANG_F77_CONFIG
+
+
+-# _LT_PROG_FC
+-# -----------
+-# Since AC_PROG_FC is broken, in that it returns the empty string
+-# if there is no fortran compiler, we have our own version here.
+-m4_defun([_LT_PROG_FC],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+-AC_PROG_FC
+-if test -z "$FC" || test "X$FC" = "Xno"; then
+- _lt_disable_FC=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_FC
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_FC], [])
+-
+-
+ # _LT_LANG_FC_CONFIG([TAG])
+ # -------------------------
+ # Ensure that the configuration variables for a Fortran compiler are
+ # suitably defined. These variables are subsequently used by _LT_CONFIG
+ # to write the compiler configuration to `libtool'.
+ m4_defun([_LT_LANG_FC_CONFIG],
+-[AC_REQUIRE([_LT_PROG_FC])dnl
+-AC_LANG_PUSH(Fortran)
++[AC_LANG_PUSH(Fortran)
++
++if test -z "$FC" || test "X$FC" = "Xno"; then
++ _lt_disable_FC=yes
++fi
+
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+@@ -6764,6 +7243,8 @@ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+ _LT_TAGVAR(no_undefined_flag, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+@@ -6803,7 +7284,9 @@ if test "$_lt_disable_FC" != yes; then
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
++ lt_save_CFLAGS=$CFLAGS
+ CC=${FC-"f95"}
++ CFLAGS=$FCFLAGS
+ compiler=$CC
+ GCC=$ac_cv_fc_compiler_gnu
+
+@@ -6859,7 +7342,8 @@ if test "$_lt_disable_FC" != yes; then
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+- CC="$lt_save_CC"
++ CC=$lt_save_CC
++ CFLAGS=$lt_save_CFLAGS
+ fi # test "$_lt_disable_FC" != yes
+
+ AC_LANG_POP
+@@ -6896,10 +7380,12 @@ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+-lt_save_CC="$CC"
++lt_save_CC=$CC
++lt_save_CFLAGS=$CFLAGS
+ lt_save_GCC=$GCC
+ GCC=yes
+ CC=${GCJ-"gcj"}
++CFLAGS=$GCJFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_TAGVAR(LD, $1)="$LD"
+@@ -6909,6 +7395,8 @@ _LT_CC_BASENAME([$compiler])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+ _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+@@ -6928,7 +7416,8 @@ fi
+ AC_LANG_RESTORE
+
+ GCC=$lt_save_GCC
+-CC="$lt_save_CC"
++CC=$lt_save_CC
++CFLAGS=$lt_save_CFLAGS
+ ])# _LT_LANG_GCJ_CONFIG
+
+
+@@ -6963,9 +7452,11 @@ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
++lt_save_CFLAGS=$CFLAGS
+ lt_save_GCC=$GCC
+ GCC=
+ CC=${RC-"windres"}
++CFLAGS=
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+@@ -6978,7 +7469,8 @@ fi
+
+ GCC=$lt_save_GCC
+ AC_LANG_RESTORE
+-CC="$lt_save_CC"
++CC=$lt_save_CC
++CFLAGS=$lt_save_CFLAGS
+ ])# _LT_LANG_RC_CONFIG
+
+
+@@ -7037,6 +7529,15 @@ _LT_DECL([], [OBJDUMP], [1], [An object
+ AC_SUBST([OBJDUMP])
+ ])
+
++# _LT_DECL_DLLTOOL
++# ----------------
++# Ensure DLLTOOL variable is set.
++m4_defun([_LT_DECL_DLLTOOL],
++[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
++AC_SUBST([DLLTOOL])
++])
+
+ # _LT_DECL_SED
+ # ------------
+@@ -7130,8 +7631,8 @@ m4_defun([_LT_CHECK_SHELL_FEATURES],
+ # Try some XSI features
+ xsi_shell=no
+ ( _lt_dummy="a/b/c"
+- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+- = c,a/b,, \
++ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
++ = c,a/b,b/c, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+@@ -7170,208 +7671,162 @@ _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn
+ ])# _LT_CHECK_SHELL_FEATURES
+
+
+-# _LT_PROG_XSI_SHELLFNS
+-# ---------------------
+-# Bourne and XSI compatible variants of some useful shell functions.
+-m4_defun([_LT_PROG_XSI_SHELLFNS],
+-[case $xsi_shell in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+-}
+-
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result="${1##*/}"
+-}
+-
+-# func_dirname_and_basename file append nondir_replacement
+-# perform func_basename and func_dirname in a single function
+-# call:
+-# dirname: Compute the dirname of FILE. If nonempty,
+-# add APPEND to the result, otherwise set result
+-# to NONDIR_REPLACEMENT.
+-# value returned in "$func_dirname_result"
+-# basename: Compute filename of FILE.
+-# value retuned in "$func_basename_result"
+-# Implementation must be kept synchronized with func_dirname
+-# and func_basename. For efficiency, we do not delegate to
+-# those functions but instead duplicate the functionality here.
+-func_dirname_and_basename ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+- func_basename_result="${1##*/}"
+-}
+-
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-func_stripname ()
+-{
+- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+- # positional parameters, so assign one to ordinary parameter first.
+- func_stripname_result=${3}
+- func_stripname_result=${func_stripname_result#"${1}"}
+- func_stripname_result=${func_stripname_result%"${2}"}
+-}
+-
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=${1%%=*}
+- func_opt_split_arg=${1#*=}
+-}
+-
+-# func_lo2o object
+-func_lo2o ()
+-{
+- case ${1} in
+- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+- *) func_lo2o_result=${1} ;;
+- esac
+-}
+-
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=${1%.*}.lo
+-}
++# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
++# ------------------------------------------------------
++# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
++# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
++m4_defun([_LT_PROG_FUNCTION_REPLACE],
++[dnl {
++sed -e '/^$1 ()$/,/^} # $1 /c\
++$1 ()\
++{\
++m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
++} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++])
+
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=$(( $[*] ))
+-}
+
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=${#1}
+-}
++# _LT_PROG_REPLACE_SHELLFNS
++# -------------------------
++# Replace existing portable implementations of several shell functions with
++# equivalent extended shell implementations where those features are available..
++m4_defun([_LT_PROG_REPLACE_SHELLFNS],
++[if test x"$xsi_shell" = xyes; then
++ _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
++ case ${1} in
++ */*) func_dirname_result="${1%/*}${2}" ;;
++ * ) func_dirname_result="${3}" ;;
++ esac])
++
++ _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
++ func_basename_result="${1##*/}"])
++
++ _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
++ case ${1} in
++ */*) func_dirname_result="${1%/*}${2}" ;;
++ * ) func_dirname_result="${3}" ;;
++ esac
++ func_basename_result="${1##*/}"])
+
+-_LT_EOF
+- ;;
+- *) # Bourne compatible functions.
+- cat << \_LT_EOF >> "$cfgfile"
++ _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
++ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
++ # positional parameters, so assign one to ordinary parameter first.
++ func_stripname_result=${3}
++ func_stripname_result=${func_stripname_result#"${1}"}
++ func_stripname_result=${func_stripname_result%"${2}"}])
+
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- # Extract subdirectory from the argument.
+- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+- if test "X$func_dirname_result" = "X${1}"; then
+- func_dirname_result="${3}"
+- else
+- func_dirname_result="$func_dirname_result${2}"
+- fi
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
++ func_split_long_opt_name=${1%%=*}
++ func_split_long_opt_arg=${1#*=}])
+
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
++ func_split_short_opt_arg=${1#??}
++ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
+
+-dnl func_dirname_and_basename
+-dnl A portable version of this function is already defined in general.m4sh
+-dnl so there is no need for it here.
++ _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
++ case ${1} in
++ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
++ *) func_lo2o_result=${1} ;;
++ esac])
+
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-# func_strip_suffix prefix name
+-func_stripname ()
+-{
+- case ${2} in
+- .*) func_stripname_result=`$ECHO "X${3}" \
+- | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+- *) func_stripname_result=`$ECHO "X${3}" \
+- | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+- esac
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
+
+-# sed scripts:
+-my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+-my_sed_long_arg='1s/^-[[^=]]*=//'
++ _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
+
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+- func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
++fi
+
+-# func_lo2o object
+-func_lo2o ()
+-{
+- func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+-}
++if test x"$lt_shell_append" = xyes; then
++ _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
+
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
++ func_quote_for_eval "${2}"
++dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
++ eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
+
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=`expr "$[@]"`
+-}
+-
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+-}
++ # Save a `func_append' function call where possible by direct use of '+='
++ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++else
++ # Save a `func_append' function call even when '+=' is not available
++ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++fi
+
+-_LT_EOF
+-esac
++if test x"$_lt_function_replace_fail" = x":"; then
++ AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
++fi
++])
+
+-case $lt_shell_append in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$[1]+=\$[2]"
+-}
+-_LT_EOF
++# _LT_PATH_CONVERSION_FUNCTIONS
++# -----------------------------
++# Determine which file name conversion functions should be used by
++# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
++# for certain cross-compile configurations and native mingw.
++m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++AC_MSG_CHECKING([how to convert $build file names to $host format])
++AC_CACHE_VAL(lt_cv_to_host_file_cmd,
++[case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
++ ;;
++ esac
+ ;;
+- *)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$[1]=\$$[1]\$[2]"
+-}
+-
+-_LT_EOF
++ *-*-cygwin* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
++ ;;
++ esac
+ ;;
+- esac
++ * ) # unhandled hosts (and "normal" native builds)
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++esac
++])
++to_host_file_cmd=$lt_cv_to_host_file_cmd
++AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
++_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
++ [0], [convert $build file names to $host format])dnl
++
++AC_MSG_CHECKING([how to convert $build file names to toolchain format])
++AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
++[#assume ordinary cross tools, or native build.
++lt_cv_to_tool_file_cmd=func_convert_file_noop
++case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ esac
++ ;;
++esac
+ ])
++to_tool_file_cmd=$lt_cv_to_tool_file_cmd
++AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
++_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
++ [0], [convert $build files to toolchain format])dnl
++])# _LT_PATH_CONVERSION_FUNCTIONS
+Index: gnutls-2.10.1/m4/libtool.m4
+===================================================================
+--- gnutls-2.10.1.orig/m4/libtool.m4
++++ gnutls-2.10.1/m4/libtool.m4
+@@ -1,7 +1,8 @@
+ # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+ #
+ # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-# 2006, 2007, 2008 Free Software Foundation, Inc.
++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
++# Inc.
+ # Written by Gordon Matzigkeit, 1996
+ #
+ # This file is free software; the Free Software Foundation gives
+@@ -10,7 +11,8 @@
+
+ m4_define([_LT_COPYING], [dnl
+ # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-# 2006, 2007, 2008 Free Software Foundation, Inc.
++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
++# Inc.
+ # Written by Gordon Matzigkeit, 1996
+ #
+ # This file is part of GNU Libtool.
+@@ -37,7 +39,7 @@ m4_define([_LT_COPYING], [dnl
+ # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ ])
+
+-# serial 56 LT_INIT
++# serial 57 LT_INIT
+
+
+ # LT_PREREQ(VERSION)
+@@ -66,6 +68,7 @@ esac
+ # ------------------
+ AC_DEFUN([LT_INIT],
+ [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
++AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+ AC_BEFORE([$0], [LT_LANG])dnl
+ AC_BEFORE([$0], [LT_OUTPUT])dnl
+ AC_BEFORE([$0], [LTDL_INIT])dnl
+@@ -82,6 +85,8 @@ AC_REQUIRE([LTVERSION_VERSION])dnl
+ AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+ m4_require([_LT_PROG_LTMAIN])dnl
+
++_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
++
+ dnl Parse OPTIONS
+ _LT_SET_OPTIONS([$0], [$1])
+
+@@ -89,7 +94,8 @@ _LT_SET_OPTIONS([$0], [$1])
+ LIBTOOL_DEPS="$ltmain"
+
+ # Always use our own libtool.
+-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++LIBTOOL='$(SHELL) $(top_builddir)'
++LIBTOOL="$LIBTOOL/${host_alias}-libtool"
+ AC_SUBST(LIBTOOL)dnl
+
+ _LT_SETUP
+@@ -118,7 +124,7 @@ m4_defun([_LT_CC_BASENAME],
+ *) break;;
+ esac
+ done
+-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+ ])
+
+
+@@ -138,6 +144,9 @@ m4_defun([_LT_FILEUTILS_DEFAULTS],
+ m4_defun([_LT_SETUP],
+ [AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
++AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
++
+ _LT_DECL([], [host_alias], [0], [The host system])dnl
+ _LT_DECL([], [host], [0])dnl
+ _LT_DECL([], [host_os], [0])dnl
+@@ -160,10 +169,13 @@ _LT_DECL([], [exeext], [0], [Executable
+ dnl
+ m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_CHECK_SHELL_FEATURES])dnl
++m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+ m4_require([_LT_CMD_RELOAD])dnl
+ m4_require([_LT_CHECK_MAGIC_METHOD])dnl
++m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+ m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+ m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
++m4_require([_LT_WITH_SYSROOT])dnl
+
+ _LT_CONFIG_LIBTOOL_INIT([
+ # See if we are running on zsh, and set the options which allow our
+@@ -179,7 +191,6 @@ fi
+ _LT_CHECK_OBJDIR
+
+ m4_require([_LT_TAG_COMPILER])dnl
+-_LT_PROG_ECHO_BACKSLASH
+
+ case $host_os in
+ aix3*)
+@@ -193,25 +204,8 @@ aix3*)
+ ;;
+ esac
+
+-# Sed substitution that helps us do robust quoting. It backslashifies
+-# metacharacters that are still active within double-quoted strings.
+-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+-
+-# Same as above, but do not quote variable references.
+-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+-
+-# Sed substitution to delay expansion of an escaped shell variable in a
+-# double_quote_subst'ed string.
+-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+-
+-# Sed substitution to delay expansion of an escaped single quote.
+-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+-
+-# Sed substitution to avoid accidental globbing in evaled expressions
+-no_glob_subst='s/\*/\\\*/g'
+-
+ # Global variables:
+-ofile=libtool
++ofile=${host_alias}-libtool
+ can_build_shared=yes
+
+ # All known linkers require a `.a' archive for static linking (except MSVC,
+@@ -250,6 +244,28 @@ _LT_CONFIG_COMMANDS
+ ])# _LT_SETUP
+
+
++# _LT_PREPARE_SED_QUOTE_VARS
++# --------------------------
++# Define a few sed substitution that help us do robust quoting.
++m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
++[# Backslashify metacharacters that are still active within
++# double-quoted strings.
++sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
++
++# Same as above, but do not quote variable references.
++double_quote_subst='s/\([["`\\]]\)/\\\1/g'
++
++# Sed substitution to delay expansion of an escaped shell variable in a
++# double_quote_subst'ed string.
++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
++
++# Sed substitution to delay expansion of an escaped single quote.
++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
++
++# Sed substitution to avoid accidental globbing in evaled expressions
++no_glob_subst='s/\*/\\\*/g'
++])
++
+ # _LT_PROG_LTMAIN
+ # ---------------
+ # Note that this code is called both from `configure', and `config.status'
+@@ -408,7 +424,7 @@ m4_define([_lt_decl_all_varnames],
+ # declaration there will have the same value as in `configure'. VARNAME
+ # must have a single quote delimited value for this to work.
+ m4_define([_LT_CONFIG_STATUS_DECLARE],
+-[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
++[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+
+
+ # _LT_CONFIG_STATUS_DECLARATIONS
+@@ -418,7 +434,7 @@ m4_define([_LT_CONFIG_STATUS_DECLARE],
+ # embedded single quotes properly. In configure, this macro expands
+ # each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+ #
+-# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
++# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+ m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+ [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+@@ -517,12 +533,20 @@ LTCC='$LTCC'
+ LTCFLAGS='$LTCFLAGS'
+ compiler='$compiler_DEFAULT'
+
++# A function that is used when there is no print builtin or printf.
++func_fallback_echo ()
++{
++ eval 'cat <<_LTECHO_EOF
++\$[]1
++_LTECHO_EOF'
++}
++
+ # Quote evaled strings.
+ for var in lt_decl_all_varnames([[ \
+ ]], lt_decl_quote_varnames); do
+- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
++ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+@@ -533,9 +557,9 @@ done
+ # Double-quote double-evaled strings.
+ for var in lt_decl_all_varnames([[ \
+ ]], lt_decl_dquote_varnames); do
+- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
++ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+@@ -543,16 +567,38 @@ for var in lt_decl_all_varnames([[ \
+ esac
+ done
+
+-# Fix-up fallback echo if it was mangled by the above quoting rules.
+-case \$lt_ECHO in
+-*'\\\[$]0 --fallback-echo"')dnl "
+- lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+- ;;
+-esac
+-
+ _LT_OUTPUT_LIBTOOL_INIT
+ ])
+
++# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
++# ------------------------------------
++# Generate a child script FILE with all initialization necessary to
++# reuse the environment learned by the parent script, and make the
++# file executable. If COMMENT is supplied, it is inserted after the
++# `#!' sequence but before initialization text begins. After this
++# macro, additional text can be appended to FILE to form the body of
++# the child script. The macro ends with non-zero status if the
++# file could not be fully written (such as if the disk is full).
++m4_ifdef([AS_INIT_GENERATED],
++[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
++[m4_defun([_LT_GENERATED_FILE_INIT],
++[m4_require([AS_PREPARE])]dnl
++[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
++[lt_write_fail=0
++cat >$1 <<_ASEOF || lt_write_fail=1
++#! $SHELL
++# Generated by $as_me.
++$2
++SHELL=\${CONFIG_SHELL-$SHELL}
++export SHELL
++_ASEOF
++cat >>$1 <<\_ASEOF || lt_write_fail=1
++AS_SHELL_SANITIZE
++_AS_PREPARE
++exec AS_MESSAGE_FD>&1
++_ASEOF
++test $lt_write_fail = 0 && chmod +x $1[]dnl
++m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
+
+ # LT_OUTPUT
+ # ---------
+@@ -562,20 +608,11 @@ _LT_OUTPUT_LIBTOOL_INIT
+ AC_DEFUN([LT_OUTPUT],
+ [: ${CONFIG_LT=./config.lt}
+ AC_MSG_NOTICE([creating $CONFIG_LT])
+-cat >"$CONFIG_LT" <<_LTEOF
+-#! $SHELL
+-# Generated by $as_me.
+-# Run this file to recreate a libtool stub with the current configuration.
+-
+-lt_cl_silent=false
+-SHELL=\${CONFIG_SHELL-$SHELL}
+-_LTEOF
++_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
++[# Run this file to recreate a libtool stub with the current configuration.])
+
+ cat >>"$CONFIG_LT" <<\_LTEOF
+-AS_SHELL_SANITIZE
+-_AS_PREPARE
+-
+-exec AS_MESSAGE_FD>&1
++lt_cl_silent=false
+ exec AS_MESSAGE_LOG_FD>>config.log
+ {
+ echo
+@@ -601,7 +638,7 @@ m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_
+ m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+ configured by $[0], generated by m4_PACKAGE_STRING.
+
+-Copyright (C) 2008 Free Software Foundation, Inc.
++Copyright (C) 2010 Free Software Foundation, Inc.
+ This config.lt script is free software; the Free Software Foundation
+ gives unlimited permision to copy, distribute and modify it."
+
+@@ -646,15 +683,13 @@ chmod +x "$CONFIG_LT"
+ # appending to config.log, which fails on DOS, as config.log is still kept
+ # open by configure. Here we exec the FD to /dev/null, effectively closing
+ # config.log, so it can be properly (re)opened and appended to by config.lt.
+-if test "$no_create" != yes; then
+- lt_cl_success=:
+- test "$silent" = yes &&
+- lt_config_lt_args="$lt_config_lt_args --quiet"
+- exec AS_MESSAGE_LOG_FD>/dev/null
+- $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+- exec AS_MESSAGE_LOG_FD>>config.log
+- $lt_cl_success || AS_EXIT(1)
+-fi
++lt_cl_success=:
++test "$silent" = yes &&
++ lt_config_lt_args="$lt_config_lt_args --quiet"
++exec AS_MESSAGE_LOG_FD>/dev/null
++$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
++exec AS_MESSAGE_LOG_FD>>config.log
++$lt_cl_success || AS_EXIT(1)
+ ])# LT_OUTPUT
+
+
+@@ -717,15 +752,12 @@ _LT_EOF
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
++ sed '$q' "$ltmain" >> "$cfgfile" \
++ || (rm -f "$cfgfile"; exit 1)
+
+- _LT_PROG_XSI_SHELLFNS
++ _LT_PROG_REPLACE_SHELLFNS
+
+- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
+-
+- mv -f "$cfgfile" "$ofile" ||
++ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+ ],
+@@ -831,11 +863,13 @@ AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)
+ AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+ AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+ AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
++AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
+ dnl aclocal-1.4 backwards compatibility:
+ dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+ dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+ dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+ dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
++dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+
+
+ # _LT_TAG_COMPILER
+@@ -940,6 +974,31 @@ m4_defun_once([_LT_REQUIRED_DARWIN_CHECK
+ [lt_cv_ld_exported_symbols_list=no])
+ LDFLAGS="$save_LDFLAGS"
+ ])
++ AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
++ [lt_cv_ld_force_load=no
++ cat > conftest.c << _LT_EOF
++int forced_loaded() { return 2;}
++_LT_EOF
++ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
++ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
++ echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
++ $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
++ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
++ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
++ cat > conftest.c << _LT_EOF
++int main() { return 0;}
++_LT_EOF
++ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
++ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
++ _lt_result=$?
++ if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
++ lt_cv_ld_force_load=yes
++ else
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ fi
++ rm -f conftest.err libconftest.a conftest conftest.c
++ rm -rf conftest.dSYM
++ ])
+ case $host_os in
+ rhapsody* | darwin1.[[012]])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+@@ -967,7 +1026,7 @@ m4_defun_once([_LT_REQUIRED_DARWIN_CHECK
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+- if test "$DSYMUTIL" != ":"; then
++ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+@@ -987,7 +1046,11 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=''
++ if test "$lt_cv_ld_force_load" = "yes"; then
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
++ else
++ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
++ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ case $cc_basename in
+@@ -995,7 +1058,7 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+- output_verbose_link_cmd=echo
++ output_verbose_link_cmd=func_echo_all
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+@@ -1011,203 +1074,142 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
+ fi
+ ])
+
+-# _LT_SYS_MODULE_PATH_AIX
+-# -----------------------
++# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
++# ----------------------------------
+ # Links a minimal program and checks the executable
+ # for the system default hardcoded library path. In most cases,
+ # this is /usr/lib:/lib, but when the MPI compilers are used
+ # the location of the communication and MPI libs are included too.
+ # If we don't find anything, use the default library path according
+ # to the aix ld manual.
++# Store the results from the different compilers for each TAGNAME.
++# Allow to override them for all tags through lt_cv_aix_libpath.
+ m4_defun([_LT_SYS_MODULE_PATH_AIX],
+ [m4_require([_LT_DECL_SED])dnl
+-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi],[])
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++if test "${lt_cv_aix_libpath+set}" = set; then
++ aix_libpath=$lt_cv_aix_libpath
++else
++ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
++ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
++ lt_aix_libpath_sed='[
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\([^ ]*\) *$/\1/
++ p
++ }
++ }]'
++ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ # Check for a 64-bit object if we didn't find anything.
++ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
++ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ fi],[])
++ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
++ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
++ fi
++ ])
++ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
++fi
+ ])# _LT_SYS_MODULE_PATH_AIX
+
+
+ # _LT_SHELL_INIT(ARG)
+ # -------------------
+ m4_define([_LT_SHELL_INIT],
+-[ifdef([AC_DIVERSION_NOTICE],
+- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+- [AC_DIVERT_PUSH(NOTICE)])
+-$1
+-AC_DIVERT_POP
+-])# _LT_SHELL_INIT
++[m4_divert_text([M4SH-INIT], [$1
++])])# _LT_SHELL_INIT
++
+
+
+ # _LT_PROG_ECHO_BACKSLASH
+ # -----------------------
+-# Add some code to the start of the generated configure script which
+-# will find an echo command which doesn't interpret backslashes.
++# Find how we can fake an echo command that does not interpret backslash.
++# In particular, with Autoconf 2.60 or later we add some code to the start
++# of the generated configure script which will find a shell with a builtin
++# printf (which we can use as an echo command).
+ m4_defun([_LT_PROG_ECHO_BACKSLASH],
+-[_LT_SHELL_INIT([
+-# Check that we are running under the correct shell.
+-SHELL=${CONFIG_SHELL-/bin/sh}
+-
+-case X$lt_ECHO in
+-X*--fallback-echo)
+- # Remove one level of quotation (which was required for Make).
+- ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+- ;;
+-esac
+-
+-ECHO=${lt_ECHO-echo}
+-if test "X[$]1" = X--no-reexec; then
+- # Discard the --no-reexec flag, and continue.
+- shift
+-elif test "X[$]1" = X--fallback-echo; then
+- # Avoid inline document here, it may be left over
+- :
+-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+- # Yippee, $ECHO works!
+- :
++[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
++ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
++
++AC_MSG_CHECKING([how to print strings])
++# Test print first, because it will be a builtin if present.
++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
++ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
++ ECHO='print -r --'
++elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
++ ECHO='printf %s\n'
+ else
+- # Restart under the correct shell.
+- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+-fi
+-
+-if test "X[$]1" = X--fallback-echo; then
+- # used as fallback echo
+- shift
+- cat <<_LT_EOF
+-[$]*
+-_LT_EOF
+- exit 0
++ # Use this function as a fallback that always works.
++ func_fallback_echo ()
++ {
++ eval 'cat <<_LTECHO_EOF
++$[]1
++_LTECHO_EOF'
++ }
++ ECHO='func_fallback_echo'
+ fi
+
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+-
+-if test -z "$lt_ECHO"; then
+- if test "X${echo_test_string+set}" != Xset; then
+- # find a string as large as possible, as long as the shell can cope with it
+- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+- if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+- { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+- then
+- break
+- fi
+- done
+- fi
+-
+- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- :
+- else
+- # The Solaris, AIX, and Digital Unix default echo programs unquote
+- # backslashes. This makes it impossible to quote backslashes using
+- # echo "$something" | sed 's/\\/\\\\/g'
+- #
+- # So, first we look for a working echo in the user's PATH.
+-
+- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+- for dir in $PATH /usr/ucb; do
+- IFS="$lt_save_ifs"
+- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- ECHO="$dir/echo"
+- break
+- fi
+- done
+- IFS="$lt_save_ifs"
+-
+- if test "X$ECHO" = Xecho; then
+- # We didn't find a better echo, so look for alternatives.
+- if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- # This shell has a builtin print -r that does the trick.
+- ECHO='print -r'
+- elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+- test "X$CONFIG_SHELL" != X/bin/ksh; then
+- # If we have ksh, try running configure again with it.
+- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+- export ORIGINAL_CONFIG_SHELL
+- CONFIG_SHELL=/bin/ksh
+- export CONFIG_SHELL
+- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+- else
+- # Try using printf.
+- ECHO='printf %s\n'
+- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- # Cool, printf works
+- :
+- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+- test "X$echo_testing_string" = 'X\t' &&
+- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+- export CONFIG_SHELL
+- SHELL="$CONFIG_SHELL"
+- export SHELL
+- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+- test "X$echo_testing_string" = 'X\t' &&
+- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+- else
+- # maybe with a smaller string...
+- prev=:
+-
+- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+- if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+- then
+- break
+- fi
+- prev="$cmd"
+- done
++# func_echo_all arg...
++# Invoke $ECHO with all args, space-separated.
++func_echo_all ()
++{
++ $ECHO "$*"
++}
+
+- if test "$prev" != 'sed 50q "[$]0"'; then
+- echo_test_string=`eval $prev`
+- export echo_test_string
+- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+- else
+- # Oops. We lost completely, so just stick with echo.
+- ECHO=echo
+- fi
+- fi
+- fi
+- fi
+- fi
+-fi
++case "$ECHO" in
++ printf*) AC_MSG_RESULT([printf]) ;;
++ print*) AC_MSG_RESULT([print -r]) ;;
++ *) AC_MSG_RESULT([cat]) ;;
++esac
+
+-# Copy echo and quote the copy suitably for passing to libtool from
+-# the Makefile, instead of quoting the original, which is used later.
+-lt_ECHO=$ECHO
+-if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+- lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+-fi
++m4_ifdef([_AS_DETECT_SUGGESTED],
++[_AS_DETECT_SUGGESTED([
++ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
++ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
++ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
++ PATH=/empty FPATH=/empty; export PATH FPATH
++ test "X`printf %s $ECHO`" = "X$ECHO" \
++ || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+
+-AC_SUBST(lt_ECHO)
+-])
+ _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+-_LT_DECL([], [ECHO], [1],
+- [An echo program that does not interpret backslashes])
++_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+ ])# _LT_PROG_ECHO_BACKSLASH
+
+
++# _LT_WITH_SYSROOT
++# ----------------
++AC_DEFUN([_LT_WITH_SYSROOT],
++[AC_MSG_CHECKING([for sysroot])
++AC_ARG_WITH([sysroot],
++[ --with-sysroot[=DIR] Search for dependent libraries within DIR
++ (or the compiler's sysroot if not specified).],
++[], [with_sysroot=no])
++
++dnl lt_sysroot will always be passed unquoted. We quote it here
++dnl in case the user passed a directory name.
++lt_sysroot=
++case ${with_sysroot} in #(
++ yes)
++ if test "$GCC" = yes; then
++ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
++ fi
++ ;; #(
++ /*)
++ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
++ ;; #(
++ no|'')
++ ;; #(
++ *)
++ AC_MSG_RESULT([${with_sysroot}])
++ AC_MSG_ERROR([The sysroot must be an absolute path.])
++ ;;
++esac
++
++ AC_MSG_RESULT([${lt_sysroot:-no}])
++_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
++[dependent libraries, and in which our libraries should be installed.])])
++
+ # _LT_ENABLE_LOCK
+ # ---------------
+ m4_defun([_LT_ENABLE_LOCK],
+@@ -1236,7 +1238,7 @@ ia64-*-hpux*)
+ ;;
+ *-*-irix6*)
+ # Find out which ABI we are using.
+- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
++ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+@@ -1354,14 +1356,47 @@ need_locks="$enable_libtool_lock"
+ ])# _LT_ENABLE_LOCK
+
+
++# _LT_PROG_AR
++# -----------
++m4_defun([_LT_PROG_AR],
++[AC_CHECK_TOOLS(AR, [ar], false)
++: ${AR=ar}
++: ${AR_FLAGS=cru}
++_LT_DECL([], [AR], [1], [The archiver])
++_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
++
++AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
++ [lt_cv_ar_at_file=no
++ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
++ [echo conftest.$ac_objext > conftest.lst
++ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
++ AC_TRY_EVAL([lt_ar_try])
++ if test "$ac_status" -eq 0; then
++ # Ensure the archiver fails upon bogus file names.
++ rm -f conftest.$ac_objext libconftest.a
++ AC_TRY_EVAL([lt_ar_try])
++ if test "$ac_status" -ne 0; then
++ lt_cv_ar_at_file=@
++ fi
++ fi
++ rm -f conftest.* libconftest.a
++ ])
++ ])
++
++if test "x$lt_cv_ar_at_file" = xno; then
++ archiver_list_spec=
++else
++ archiver_list_spec=$lt_cv_ar_at_file
++fi
++_LT_DECL([], [archiver_list_spec], [1],
++ [How to feed a file listing to the archiver])
++])# _LT_PROG_AR
++
++
+ # _LT_CMD_OLD_ARCHIVE
+ # -------------------
+ m4_defun([_LT_CMD_OLD_ARCHIVE],
+-[AC_CHECK_TOOL(AR, ar, false)
+-test -z "$AR" && AR=ar
+-test -z "$AR_FLAGS" && AR_FLAGS=cru
+-_LT_DECL([], [AR], [1], [The archiver])
+-_LT_DECL([], [AR_FLAGS], [1])
++[_LT_PROG_AR
+
+ AC_CHECK_TOOL(STRIP, strip, :)
+ test -z "$STRIP" && STRIP=:
+@@ -1388,10 +1423,19 @@ if test -n "$RANLIB"; then
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+ fi
++
++case $host_os in
++ darwin*)
++ lock_old_archive_extraction=yes ;;
++ *)
++ lock_old_archive_extraction=no ;;
++esac
+ _LT_DECL([], [old_postinstall_cmds], [2])
+ _LT_DECL([], [old_postuninstall_cmds], [2])
+ _LT_TAGDECL([], [old_archive_cmds], [2],
+ [Commands used to build an old-style archive])
++_LT_DECL([], [lock_old_archive_extraction], [0],
++ [Whether to use a lock for old archive extraction])
+ ])# _LT_CMD_OLD_ARCHIVE
+
+
+@@ -1416,15 +1460,15 @@ AC_CACHE_CHECK([$1], [$2],
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+@@ -1464,7 +1508,7 @@ AC_CACHE_CHECK([$1], [$2],
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&AS_MESSAGE_LOG_FD
+- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
++ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+@@ -1527,6 +1571,11 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [d
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
++ mint*)
++ # On MiNT this can take a long time and run out of memory.
++ lt_cv_sys_max_cmd_len=8192;
++ ;;
++
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+@@ -1591,8 +1640,8 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [d
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+- while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+- = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
++ while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
++ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+@@ -1643,7 +1692,7 @@ else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+-[#line __oline__ "configure"
++[#line $LINENO "configure"
+ #include "confdefs.h"
+
+ #if HAVE_DLFCN_H
+@@ -1684,7 +1733,13 @@ else
+ # endif
+ #endif
+
+-void fnord() { int i=42;}
++/* When -fvisbility=hidden is used, assume the code has been annotated
++ correspondingly for the symbols needed. */
++#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
++int fnord () __attribute__((visibility("default")));
++#endif
++
++int fnord () { return 42; }
+ int main ()
+ {
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+@@ -1693,7 +1748,11 @@ int main ()
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++ else
++ {
++ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++ else puts (dlerror ());
++ }
+ /* dlclose (self); */
+ }
+ else
+@@ -1869,16 +1928,16 @@ AC_CACHE_CHECK([if $compiler supports -c
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&AS_MESSAGE_LOG_FD
+- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
++ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+@@ -2037,6 +2096,7 @@ m4_require([_LT_DECL_EGREP])dnl
+ m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_DECL_OBJDUMP])dnl
+ m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+ AC_MSG_CHECKING([dynamic linker characteristics])
+ m4_if([$1],
+ [], [
+@@ -2045,16 +2105,23 @@ if test "$GCC" = yes; then
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+- if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
++ case $host_os in
++ mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
++ *) lt_sed_strip_eq="s,=/,/,g" ;;
++ esac
++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
++ case $lt_search_path_spec in
++ *\;*)
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+- else
+- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+- fi
++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
++ ;;
++ *)
++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
++ ;;
++ esac
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+@@ -2067,7 +2134,7 @@ if test "$GCC" = yes; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+- lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
++ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+ BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+@@ -2087,7 +2154,13 @@ BEGIN {RS=" "; FS="/|\n";} {
+ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+ }'`
+- sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
++ # AWK program above erroneously prepends '/' to C:/dos/paths
++ # for these hosts.
++ case $host_os in
++ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
++ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
++ esac
++ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+ else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ fi])
+@@ -2175,7 +2248,7 @@ amigaos*)
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+@@ -2206,8 +2279,9 @@ cygwin* | mingw* | pw32* | cegcc*)
+ need_version=no
+ need_lib_prefix=no
+
+- case $GCC,$host_os in
+- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
++ case $GCC,$cc_basename in
++ yes,*)
++ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+@@ -2228,36 +2302,83 @@ cygwin* | mingw* | pw32* | cegcc*)
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
++m4_if([$1], [],[
++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+- if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+- # It is most probably a Windows format PATH printed by
+- # mingw gcc, but we are running on Cygwin. Gcc prints its search
+- # path with ; separators, and with drive letters. We can handle the
+- # drive letters (cygwin fileutils understands them), so leave them,
+- # especially as we might pass files found there to a mingw objdump,
+- # which wouldn't understand a cygwinified path. Ahh.
+- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+- else
+- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+- fi
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
++ dynamic_linker='Win32 ld.exe'
++ ;;
++
++ *,cl*)
++ # Native MSVC
++ libname_spec='$name'
++ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++ library_names_spec='${libname}.dll.lib'
++
++ case $build_os in
++ mingw*)
++ sys_lib_search_path_spec=
++ lt_save_ifs=$IFS
++ IFS=';'
++ for lt_path in $LIB
++ do
++ IFS=$lt_save_ifs
++ # Let DOS variable expansion print the short 8.3 style file name.
++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
++ done
++ IFS=$lt_save_ifs
++ # Convert to MSYS style.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
++ ;;
++ cygwin*)
++ # Convert to unix form, then to dos form, then back to unix form
++ # but this time dos style (no spaces!) so that the unix form looks
++ # like /cygdrive/c/PROGRA~1:/cygdr...
++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ ;;
++ *)
++ sys_lib_search_path_spec="$LIB"
++ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
++ # It is most probably a Windows format PATH.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++ else
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ fi
++ # FIXME: find the short name or the path components, as spaces are
++ # common. (e.g. "Program Files" -> "PROGRA~1")
++ ;;
++ esac
++
++ # DLL is installed to $(libdir)/../bin by postinstall_cmds
++ postinstall_cmds='base_file=`basename \${file}`~
++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++ dldir=$destdir/`dirname \$dlpath`~
++ test -d \$dldir || mkdir -p \$dldir~
++ $install_prog $dir/$dlname \$dldir/$dlname'
++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++ dlpath=$dir/\$dldll~
++ $RM \$dlpath'
++ shlibpath_overrides_runpath=yes
++ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
++ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
++ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+- dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+@@ -2344,6 +2465,19 @@ gnu*)
+ hardcode_into_libs=yes
+ ;;
+
++haiku*)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ dynamic_linker="$host_os runtime_loader"
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
++ hardcode_into_libs=yes
++ ;;
++
+ hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+@@ -2386,8 +2520,10 @@ hpux9* | hpux10* | hpux11*)
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+- # HP-UX runs *really* slowly unless shared libraries are mode 555.
++ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
++ # or fails outright, so override atomically:
++ install_override_mode=555
+ ;;
+
+ interix[[3-9]]*)
+@@ -2454,16 +2590,21 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
++
+ # Some binutils ld are patched to set DT_RUNPATH
+- save_LDFLAGS=$LDFLAGS
+- save_libdir=$libdir
+- eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+- LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+- [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+- [shlibpath_overrides_runpath=yes])])
+- LDFLAGS=$save_LDFLAGS
+- libdir=$save_libdir
++ AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
++ [lt_cv_shlibpath_overrides_runpath=no
++ save_LDFLAGS=$LDFLAGS
++ save_libdir=$libdir
++ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
++ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
++ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
++ [lt_cv_shlibpath_overrides_runpath=yes])])
++ LDFLAGS=$save_LDFLAGS
++ libdir=$save_libdir
++ ])
++ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+@@ -2472,7 +2613,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+@@ -2485,18 +2626,6 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+-netbsdelf*-gnu)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=no
+- hardcode_into_libs=yes
+- dynamic_linker='NetBSD ld.elf_so'
+- ;;
+-
+ netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+@@ -2717,6 +2846,8 @@ _LT_DECL([], [library_names_spec], [1],
+ The last name is the one that the linker finds with -lNAME]])
+ _LT_DECL([], [soname_spec], [1],
+ [[The coded name of the library, if different from the real name]])
++_LT_DECL([], [install_override_mode], [1],
++ [Permission mode override for installation of shared libraries])
+ _LT_DECL([], [postinstall_cmds], [2],
+ [Command to use after installation of a shared archive])
+ _LT_DECL([], [postuninstall_cmds], [2],
+@@ -2829,6 +2960,7 @@ AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ m4_require([_LT_DECL_SED])dnl
+ m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
+
+ AC_ARG_WITH([gnu-ld],
+ [AS_HELP_STRING([--with-gnu-ld],
+@@ -2950,6 +3082,11 @@ case $reload_flag in
+ esac
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ case $host_os in
++ cygwin* | mingw* | pw32* | cegcc*)
++ if test "$GCC" != yes; then
++ reload_cmds=false
++ fi
++ ;;
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+@@ -2958,8 +3095,8 @@ case $host_os in
+ fi
+ ;;
+ esac
+-_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+-_LT_DECL([], [reload_cmds], [2])dnl
++_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
++_LT_TAGDECL([], [reload_cmds], [2])dnl
+ ])# _LT_CMD_RELOAD
+
+
+@@ -3011,16 +3148,18 @@ mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+- if ( file / ) >/dev/null 2>&1; then
++ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
++ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
++ # Keep this pattern in sync with the one in func_win32_libid.
++ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+-cegcc)
++cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+@@ -3050,6 +3189,10 @@ gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
++haiku*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
+ hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+@@ -3058,11 +3201,11 @@ hpux10.20* | hpux11*)
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
++ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+@@ -3088,7 +3231,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+-netbsd* | netbsdelf*-gnu)
++netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ else
+@@ -3162,6 +3305,21 @@ tpf*)
+ ;;
+ esac
+ ])
++
++file_magic_glob=
++want_nocaseglob=no
++if test "$build" = "$host"; then
++ case $host_os in
++ mingw* | pw32*)
++ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
++ want_nocaseglob=yes
++ else
++ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
++ fi
++ ;;
++ esac
++fi
++
+ file_magic_cmd=$lt_cv_file_magic_cmd
+ deplibs_check_method=$lt_cv_deplibs_check_method
+ test -z "$deplibs_check_method" && deplibs_check_method=unknown
+@@ -3169,7 +3327,11 @@ test -z "$deplibs_check_method" && depli
+ _LT_DECL([], [deplibs_check_method], [1],
+ [Method to check whether dependent libraries are shared objects])
+ _LT_DECL([], [file_magic_cmd], [1],
+- [Command to use when deplibs_check_method == "file_magic"])
++ [Command to use when deplibs_check_method = "file_magic"])
++_LT_DECL([], [file_magic_glob], [1],
++ [How to find potential files when deplibs_check_method = "file_magic"])
++_LT_DECL([], [want_nocaseglob], [1],
++ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+ ])# _LT_CHECK_MAGIC_METHOD
+
+
+@@ -3226,7 +3388,19 @@ if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+ else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+- AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
++ if test -n "$DUMPBIN"; then :
++ # Let the user override the test.
++ else
++ AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
++ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
++ *COFF*)
++ DUMPBIN="$DUMPBIN -symbols"
++ ;;
++ *)
++ DUMPBIN=:
++ ;;
++ esac
++ fi
+ AC_SUBST([DUMPBIN])
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+@@ -3239,13 +3413,13 @@ _LT_DECL([], [NM], [1], [A BSD- or MS-co
+ AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+ [lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+- (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
++ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+- (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
++ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+- (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
++ (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+ cat conftest.out >&AS_MESSAGE_LOG_FD
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+@@ -3260,23 +3434,84 @@ dnl aclocal-1.4 backwards compatibility:
+ dnl AC_DEFUN([AM_PROG_NM], [])
+ dnl AC_DEFUN([AC_PROG_NM], [])
+
++# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
++# --------------------------------
++# how to determine the name of the shared library
++# associated with a specific link library.
++# -- PORTME fill in with the dynamic library characteristics
++m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
++[m4_require([_LT_DECL_EGREP])
++m4_require([_LT_DECL_OBJDUMP])
++m4_require([_LT_DECL_DLLTOOL])
++AC_CACHE_CHECK([how to associate runtime and link libraries],
++lt_cv_sharedlib_from_linklib_cmd,
++[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+-# LT_LIB_M
+-# --------
+-# check for math library
+-AC_DEFUN([LT_LIB_M],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-LIBM=
+-case $host in
+-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+- # These system don't have libm, or don't need it
+- ;;
+-*-ncr-sysv4.3*)
+- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
++case $host_os in
++cygwin* | mingw* | pw32* | cegcc*)
++ # two different shell functions defined in ltmain.sh
++ # decide which to use based on capabilities of $DLLTOOL
++ case `$DLLTOOL --help 2>&1` in
++ *--identify-strict*)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
++ ;;
++ *)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
++ ;;
++ esac
+ ;;
+ *)
+- AC_CHECK_LIB(m, cos, LIBM="-lm")
++ # fallback: assume linklib IS sharedlib
++ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
++ ;;
++esac
++])
++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
++
++_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
++ [Command to associate shared and link libraries])
++])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
++
++
++# _LT_PATH_MANIFEST_TOOL
++# ----------------------
++# locate the manifest tool
++m4_defun([_LT_PATH_MANIFEST_TOOL],
++[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
++AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
++ [lt_cv_path_mainfest_tool=no
++ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
++ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
++ lt_cv_path_mainfest_tool=yes
++ fi
++ rm -f conftest*])
++if test "x$lt_cv_path_mainfest_tool" != xyes; then
++ MANIFEST_TOOL=:
++fi
++_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
++])# _LT_PATH_MANIFEST_TOOL
++
++
++# LT_LIB_M
++# --------
++# check for math library
++AC_DEFUN([LT_LIB_M],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++LIBM=
++case $host in
++*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
++ # These system don't have libm, or don't need it
++ ;;
++*-ncr-sysv4.3*)
++ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
++ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
++ ;;
++*)
++ AC_CHECK_LIB(m, cos, LIBM="-lm")
+ ;;
+ esac
+ AC_SUBST([LIBM])
+@@ -3296,7 +3531,12 @@ m4_defun([_LT_COMPILER_NO_RTTI],
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+ if test "$GCC" = yes; then
+- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
++ case $cc_basename in
++ nvcc*)
++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
++ *)
++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
++ esac
+
+ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+ lt_cv_prog_compiler_rtti_exceptions,
+@@ -3313,6 +3553,7 @@ _LT_TAGDECL([no_builtin_flag], [lt_prog_
+ m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+ [AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([AC_PROG_AWK])dnl
+ AC_REQUIRE([LT_PATH_NM])dnl
+ AC_REQUIRE([LT_PATH_LD])dnl
+ m4_require([_LT_DECL_SED])dnl
+@@ -3380,8 +3621,8 @@ esac
+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+ # Transform an extracted symbol line into symbol name and symbol address
+-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
+-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+ # Handle CRLF in mingw tool chain
+ opt_cr=
+@@ -3417,6 +3658,7 @@ for ac_symprfx in "" "_"; do
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
++ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+@@ -3438,7 +3680,7 @@ _LT_EOF
+ if AC_TRY_EVAL(ac_compile); then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
++ if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+@@ -3450,6 +3692,18 @@ _LT_EOF
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
++/* DATA imports from DLLs on WIN32 con't be const, because runtime
++ relocations are performed -- see ld's documentation on pseudo-relocs. */
++# define LT@&t@_DLSYM_CONST
++#elif defined(__osf__)
++/* This system does not cope well with relocations in const data. */
++# define LT@&t@_DLSYM_CONST
++#else
++# define LT@&t@_DLSYM_CONST const
++#endif
++
+ #ifdef __cplusplus
+ extern "C" {
+ #endif
+@@ -3461,7 +3715,7 @@ _LT_EOF
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+ /* The mapping between symbol names and symbols. */
+-const struct {
++LT@&t@_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+ }
+@@ -3487,15 +3741,15 @@ static const void *lt_preloaded_setup()
+ _LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+- lt_save_LIBS="$LIBS"
+- lt_save_CFLAGS="$CFLAGS"
++ lt_globsym_save_LIBS=$LIBS
++ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+- LIBS="$lt_save_LIBS"
+- CFLAGS="$lt_save_CFLAGS"
++ LIBS=$lt_globsym_save_LIBS
++ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+@@ -3528,6 +3782,13 @@ else
+ AC_MSG_RESULT(ok)
+ fi
+
++# Response file support.
++if test "$lt_cv_nm_interface" = "MS dumpbin"; then
++ nm_file_list_spec='@'
++elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
++ nm_file_list_spec='@'
++fi
++
+ _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+ [Take the output of nm and produce a listing of raw symbols and C names])
+ _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+@@ -3538,6 +3799,8 @@ _LT_DECL([global_symbol_to_c_name_addres
+ _LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+ [Transform the output of nm in a C name address pair when lib prefix is needed])
++_LT_DECL([], [nm_file_list_spec], [1],
++ [Specify filename containing input files for $NM])
+ ]) # _LT_CMD_GLOBAL_SYMBOLS
+
+
+@@ -3549,7 +3812,6 @@ _LT_TAGVAR(lt_prog_compiler_wl, $1)=
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+-AC_MSG_CHECKING([for $compiler option to produce PIC])
+ m4_if([$1], [CXX], [
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+@@ -3600,6 +3862,11 @@ m4_if([$1], [CXX], [
+ # DJGPP does not support shared libraries at all
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
++ haiku*)
++ # PIC is the default for Haiku.
++ # The "-static" flag exists, but is broken.
++ _LT_TAGVAR(lt_prog_compiler_static, $1)=
++ ;;
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+@@ -3649,6 +3916,12 @@ m4_if([$1], [CXX], [
+ ;;
+ esac
+ ;;
++ mingw* | cygwin* | os2* | pw32* | cegcc*)
++ # This hack is so that the source file can tell whether it is being
++ # built for inclusion in a dll (and should export symbols for example).
++ m4_if([$1], [GCJ], [],
++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+@@ -3738,8 +4011,8 @@ m4_if([$1], [CXX], [
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+- xlc* | xlC*)
+- # IBM XL 8.0 on PPC
++ xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
++ # IBM XL 8.0, 9.0 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+@@ -3769,7 +4042,7 @@ m4_if([$1], [CXX], [
+ ;;
+ esac
+ ;;
+- netbsd* | netbsdelf*-gnu)
++ netbsd*)
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+@@ -3801,7 +4074,7 @@ m4_if([$1], [CXX], [
+ ;;
+ solaris*)
+ case $cc_basename in
+- CC*)
++ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+@@ -3905,6 +4178,12 @@ m4_if([$1], [CXX], [
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+
++ haiku*)
++ # PIC is the default for Haiku.
++ # The "-static" flag exists, but is broken.
++ _LT_TAGVAR(lt_prog_compiler_static, $1)=
++ ;;
++
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+@@ -3947,6 +4226,13 @@ m4_if([$1], [CXX], [
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
++
++ case $cc_basename in
++ nvcc*) # Cuda Compiler Driver 2.2
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC'
++ ;;
++ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+@@ -4010,7 +4296,13 @@ m4_if([$1], [CXX], [
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+ ;;
+- pgcc* | pgf77* | pgf90* | pgf95*)
++ nagfor*)
++ # NAG Fortran compiler
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+@@ -4022,25 +4314,25 @@ m4_if([$1], [CXX], [
+ # All Alpha code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+- xl*)
+- # IBM XL C 8.0/Fortran 10.1 on PPC
++ xl* | bgxl* | bgf* | mpixl*)
++ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*)
+- # Sun C 5.9
++ *Sun\ F* | *Sun*Fortran*)
++ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+ ;;
+- *Sun\ F*)
+- # Sun Fortran 8.3 passes all unrecognized flags to the linker
++ *Sun\ C*)
++ # Sun C 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ ;;
+ esac
+ ;;
+@@ -4072,7 +4364,7 @@ m4_if([$1], [CXX], [
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ case $cc_basename in
+- f77* | f90* | f95*)
++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+@@ -4129,9 +4421,11 @@ case $host_os in
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+ ;;
+ esac
+-AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+- [How to pass a linker flag through the compiler])
++
++AC_CACHE_CHECK([for $compiler option to produce PIC],
++ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
++ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
++_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
+ #
+ # Check to make sure the PIC flag actually works.
+@@ -4150,6 +4444,8 @@ fi
+ _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+ [Additional compiler flags for building library objects])
+
++_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
++ [How to pass a linker flag through the compiler])
+ #
+ # Check to make sure the static flag actually works.
+ #
+@@ -4170,6 +4466,7 @@ _LT_TAGDECL([link_static_flag], [lt_prog
+ m4_defun([_LT_LINKER_SHLIBS],
+ [AC_REQUIRE([LT_PATH_LD])dnl
+ AC_REQUIRE([LT_PATH_NM])dnl
++m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+ m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_DECL_EGREP])dnl
+ m4_require([_LT_DECL_SED])dnl
+@@ -4178,30 +4475,35 @@ m4_require([_LT_TAG_COMPILER])dnl
+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ m4_if([$1], [CXX], [
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ case $host_os in
+ aix[[4-9]]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
++ # Also, AIX nm treats weak defined symbols like other global defined
++ # symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ ;;
+ pw32*)
+ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+- ;;
++ ;;
+ cygwin* | mingw* | cegcc*)
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+- ;;
+- linux* | k*bsd*-gnu)
+- _LT_TAGVAR(link_all_deplibs, $1)=no
+- ;;
++ case $cc_basename in
++ cl*) ;;
++ *)
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
++ ;;
++ esac
++ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+- ;;
++ ;;
+ esac
+- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ ], [
+ runpath_var=
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+@@ -4261,13 +4563,36 @@ dnl Note also adjust exclude_expsyms for
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+- linux* | k*bsd*-gnu)
+- _LT_TAGVAR(link_all_deplibs, $1)=no
+- ;;
+ esac
+
+ _LT_TAGVAR(ld_shlibs, $1)=yes
++
++ # On some targets, GNU ld is compatible enough with the native linker
++ # that we're better off using the native interface for both.
++ lt_use_gnu_ld_interface=no
+ if test "$with_gnu_ld" = yes; then
++ case $host_os in
++ aix*)
++ # The AIX port of GNU ld has always aspired to compatibility
++ # with the native linker. However, as the warning in the GNU ld
++ # block says, versions before 2.19.5* couldn't really create working
++ # shared libraries, regardless of the interface used.
++ case `$LD -v 2>&1` in
++ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
++ *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
++ *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
++ *)
++ lt_use_gnu_ld_interface=yes
++ ;;
++ esac
++ ;;
++ *)
++ lt_use_gnu_ld_interface=yes
++ ;;
++ esac
++ fi
++
++ if test "$lt_use_gnu_ld_interface" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+@@ -4301,11 +4626,12 @@ dnl Note also adjust exclude_expsyms for
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
++*** Warning: the GNU linker, at least up to release 2.19, is reported
+ *** to be unable to reliably create shared libraries on AIX.
+ *** Therefore, libtool is disabling shared libraries support. If you
+-*** really care for shared libraries, you may want to modify your PATH
+-*** so that a non-GNU linker is found, and then restart.
++*** really care for shared libraries, you may want to install binutils
++*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
++*** You will then need to restart the configuration process.
+
+ _LT_EOF
+ fi
+@@ -4341,10 +4667,12 @@ _LT_EOF
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+@@ -4362,6 +4690,11 @@ _LT_EOF
+ fi
+ ;;
+
++ haiku*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ ;;
++
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+@@ -4387,15 +4720,16 @@ _LT_EOF
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+- tmp_addflag=
++ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ pgf77* | pgf90* | pgf95* | pgfortran*)
++ # Portland Group f77 and f90 compilers
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+@@ -4406,13 +4740,17 @@ _LT_EOF
+ lf95*) # Lahey Fortran 8.1
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ tmp_sharedflag='--shared' ;;
+- xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
++ xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
++ nvcc*) # Cuda Compiler Driver 2.2
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(compiler_needs_object, $1)=yes
++ ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+@@ -4428,17 +4766,17 @@ _LT_EOF
+ fi
+
+ case $cc_basename in
+- xlf*)
++ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+- _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+@@ -4447,13 +4785,13 @@ _LT_EOF
+ fi
+ ;;
+
+- netbsd* | netbsdelf*-gnu)
++ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+@@ -4471,8 +4809,8 @@ _LT_EOF
+
+ _LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+@@ -4518,8 +4856,8 @@ _LT_EOF
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+@@ -4559,8 +4897,10 @@ _LT_EOF
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
++ # Also, AIX nm treats weak defined symbols like other global
++ # defined symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+@@ -4622,7 +4962,6 @@ _LT_EOF
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+- _LT_TAGVAR(link_all_deplibs, $1)=no
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+@@ -4648,9 +4987,9 @@ _LT_EOF
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
++ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+@@ -4659,14 +4998,19 @@ _LT_EOF
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
++ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+- # Exported symbols can be pulled into shared objects from archives
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++ if test "$with_gnu_ld" = yes; then
++ # We only use this code for GNU lds that support --whole-archive.
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++ else
++ # Exported symbols can be pulled into shared objects from archives
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+@@ -4698,20 +5042,63 @@ _LT_EOF
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- # Tell ltmain to make .lib files, not .a files.
+- libext=lib
+- # Tell ltmain to make .dll files, not .so files.
+- shrext_cmds=".dll"
+- # FIXME: Setting linknames here is a bad hack.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+- # The linker will automatically build a .lib file if we build a DLL.
+- _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+- # FIXME: Should let the user specify the lib program.
+- _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+- _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ case $cc_basename in
++ cl*)
++ # Native MSVC
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=yes
++ _LT_TAGVAR(file_list_spec, $1)='@'
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++ else
++ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++ fi~
++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++ linknames='
++ # The linker will not automatically build a static lib if we build a DLL.
++ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++ # Don't use ranlib
++ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
++ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
++ lt_tool_outputfile="@TOOL_OUTPUT@"~
++ case $lt_outputfile in
++ *.exe|*.EXE) ;;
++ *)
++ lt_outputfile="$lt_outputfile.exe"
++ lt_tool_outputfile="$lt_tool_outputfile.exe"
++ ;;
++ esac~
++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++ $RM "$lt_outputfile.manifest";
++ fi'
++ ;;
++ *)
++ # Assume MSVC wrapper
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
++ # The linker will automatically build a .lib file if we build a DLL.
++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++ # FIXME: Should let the user specify the lib program.
++ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ ;;
++ esac
+ ;;
+
+ darwin* | rhapsody*)
+@@ -4749,7 +5136,7 @@ _LT_EOF
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+@@ -4757,7 +5144,7 @@ _LT_EOF
+
+ hpux9*)
+ if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+@@ -4772,8 +5159,8 @@ _LT_EOF
+ ;;
+
+ hpux10*)
+- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+@@ -4791,16 +5178,16 @@ _LT_EOF
+ ;;
+
+ hpux11*)
+- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+@@ -4812,7 +5199,14 @@ _LT_EOF
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ m4_if($1, [], [
++ # Older versions of the 11.00 compiler do not understand -b yet
++ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
++ _LT_LINKER_OPTION([if $CC understands -b],
++ _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
++ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
++ [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
++ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+ ;;
+ esac
+ fi
+@@ -4840,19 +5234,34 @@ _LT_EOF
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+- save_LDFLAGS="$LDFLAGS"
+- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+- AC_LINK_IFELSE(int foo(void) {},
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+- )
+- LDFLAGS="$save_LDFLAGS"
++ # This should be the same for all languages, so no per-tag cache variable.
++ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
++ [lt_cv_irix_exported_symbol],
++ [save_LDFLAGS="$LDFLAGS"
++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
++ AC_LINK_IFELSE(
++ [AC_LANG_SOURCE(
++ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
++ [C++], [[int foo (void) { return 0; }]],
++ [Fortran 77], [[
++ subroutine foo
++ end]],
++ [Fortran], [[
++ subroutine foo
++ end]])])],
++ [lt_cv_irix_exported_symbol=yes],
++ [lt_cv_irix_exported_symbol=no])
++ LDFLAGS="$save_LDFLAGS"])
++ if test "$lt_cv_irix_exported_symbol" = yes; then
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
++ fi
+ else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+@@ -4861,7 +5270,7 @@ _LT_EOF
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+- netbsd* | netbsdelf*-gnu)
++ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+@@ -4914,17 +5323,17 @@ _LT_EOF
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
++ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+@@ -4934,13 +5343,13 @@ _LT_EOF
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
++ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+@@ -4953,9 +5362,9 @@ _LT_EOF
+ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+@@ -5131,36 +5540,38 @@ x|xyes)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+- $RM conftest*
+- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+-
+- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+- soname=conftest
+- lib=conftest
+- libobjs=conftest.$ac_objext
+- deplibs=
+- wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+- pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+- compiler_flags=-v
+- linker_flags=-v
+- verstring=
+- output_objdir=.
+- libname=conftest
+- lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+- _LT_TAGVAR(allow_undefined_flag, $1)=
+- if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+- then
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- else
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+- fi
+- _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+- else
+- cat conftest.err 1>&5
+- fi
+- $RM conftest*
+- AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
++ AC_CACHE_CHECK([whether -lc should be explicitly linked in],
++ [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
++ [$RM conftest*
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
++ soname=conftest
++ lib=conftest
++ libobjs=conftest.$ac_objext
++ deplibs=
++ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
++ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
++ compiler_flags=-v
++ linker_flags=-v
++ verstring=
++ output_objdir=.
++ libname=conftest
++ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
++ _LT_TAGVAR(allow_undefined_flag, $1)=
++ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
++ then
++ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ else
++ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++ fi
++ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
++ else
++ cat conftest.err 1>&5
++ fi
++ $RM conftest*
++ ])
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+ ;;
+ esac
+ fi
+@@ -5225,8 +5636,6 @@ _LT_TAGDECL([], [inherit_rpath], [0],
+ to runtime path list])
+ _LT_TAGDECL([], [link_all_deplibs], [0],
+ [Whether libtool must link a program against all its dependency libraries])
+-_LT_TAGDECL([], [fix_srcfile_path], [1],
+- [Fix the shell variable $srcfile for the compiler])
+ _LT_TAGDECL([], [always_export_symbols], [0],
+ [Set to "yes" if exported symbols are required])
+ _LT_TAGDECL([], [export_symbols_cmds], [2],
+@@ -5237,6 +5646,8 @@ _LT_TAGDECL([], [include_expsyms], [1],
+ [Symbols that must always be exported])
+ _LT_TAGDECL([], [prelink_cmds], [2],
+ [Commands necessary for linking programs (against libraries) with templates])
++_LT_TAGDECL([], [postlink_cmds], [2],
++ [Commands necessary for finishing linking programs])
+ _LT_TAGDECL([], [file_list_spec], [1],
+ [Specify filename containing input files])
+ dnl FIXME: Not yet implemented
+@@ -5330,37 +5741,22 @@ CC="$lt_save_CC"
+ ])# _LT_LANG_C_CONFIG
+
+
+-# _LT_PROG_CXX
+-# ------------
+-# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+-# compiler, we have our own version here.
+-m4_defun([_LT_PROG_CXX],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+-AC_PROG_CXX
+-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+- (test "X$CXX" != "Xg++"))) ; then
+- AC_PROG_CXXCPP
+-else
+- _lt_caught_CXX_error=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_CXX
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_CXX], [])
+-
+-
+ # _LT_LANG_CXX_CONFIG([TAG])
+ # --------------------------
+ # Ensure that the configuration variables for a C++ compiler are suitably
+ # defined. These variables are subsequently used by _LT_CONFIG to write
+ # the compiler configuration to `libtool'.
+ m4_defun([_LT_LANG_CXX_CONFIG],
+-[AC_REQUIRE([_LT_PROG_CXX])dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_PATH_MANIFEST_TOOL])dnl
++if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
++ (test "X$CXX" != "Xg++"))) ; then
++ AC_PROG_CXXCPP
++else
++ _lt_caught_CXX_error=yes
++fi
+
+ AC_LANG_PUSH(C++)
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+@@ -5382,6 +5778,8 @@ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+ _LT_TAGVAR(no_undefined_flag, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+@@ -5413,6 +5811,7 @@ if test "$_lt_caught_CXX_error" != yes;
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
++ lt_save_CFLAGS=$CFLAGS
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+@@ -5430,6 +5829,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
++ CFLAGS=$CXXFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+@@ -5451,8 +5851,8 @@ if test "$_lt_caught_CXX_error" != yes;
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+@@ -5484,7 +5884,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ GXX=no
+@@ -5593,10 +5993,10 @@ if test "$_lt_caught_CXX_error" != yes;
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+- _LT_SYS_MODULE_PATH_AIX
++ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+@@ -5605,14 +6005,19 @@ if test "$_lt_caught_CXX_error" != yes;
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
++ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+- # Exported symbols can be pulled into shared objects from archives
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++ if test "$with_gnu_ld" = yes; then
++ # We only use this code for GNU lds that support --whole-archive.
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++ else
++ # Exported symbols can be pulled into shared objects from archives
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared
+ # libraries.
+@@ -5642,28 +6047,75 @@ if test "$_lt_caught_CXX_error" != yes;
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+- # as there is no search path for DLLs.
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(always_export_symbols, $1)=no
+- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+-
+- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- # If the export-symbols file already is a .def file (1st line
+- # is EXPORTS), use it as is; otherwise, prepend...
+- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+- cp $export_symbols $output_objdir/$soname.def;
+- else
+- echo EXPORTS > $output_objdir/$soname.def;
+- cat $export_symbols >> $output_objdir/$soname.def;
+- fi~
+- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
++ case $GXX,$cc_basename in
++ ,cl* | no,cl*)
++ # Native MSVC
++ # hardcode_libdir_flag_spec is actually meaningless, as there is
++ # no search path for DLLs.
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=yes
++ _LT_TAGVAR(file_list_spec, $1)='@'
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++ else
++ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++ fi~
++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++ linknames='
++ # The linker will not automatically build a static lib if we build a DLL.
++ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ # Don't use ranlib
++ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
++ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
++ lt_tool_outputfile="@TOOL_OUTPUT@"~
++ case $lt_outputfile in
++ *.exe|*.EXE) ;;
++ *)
++ lt_outputfile="$lt_outputfile.exe"
++ lt_tool_outputfile="$lt_tool_outputfile.exe"
++ ;;
++ esac~
++ func_to_tool_file "$lt_outputfile"~
++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++ $RM "$lt_outputfile.manifest";
++ fi'
++ ;;
++ *)
++ # g++
++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
++ # as there is no search path for DLLs.
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=no
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++
++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ # If the export-symbols file already is a .def file (1st line
++ # is EXPORTS), use it as is; otherwise, prepend...
++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ cp $export_symbols $output_objdir/$soname.def;
++ else
++ echo EXPORTS > $output_objdir/$soname.def;
++ cat $export_symbols >> $output_objdir/$soname.def;
++ fi~
++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+@@ -5705,6 +6157,11 @@ if test "$_lt_caught_CXX_error" != yes;
+ gnu*)
+ ;;
+
++ haiku*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ ;;
++
+ hpux9*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+@@ -5729,11 +6186,11 @@ if test "$_lt_caught_CXX_error" != yes;
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+@@ -5794,7 +6251,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+@@ -5804,10 +6261,10 @@ if test "$_lt_caught_CXX_error" != yes;
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+@@ -5837,7 +6294,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ case $cc_basename in
+ CC*)
+ # SGI C++
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+@@ -5848,9 +6305,9 @@ if test "$_lt_caught_CXX_error" != yes;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ fi
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+@@ -5879,7 +6336,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+@@ -5916,26 +6373,26 @@ if test "$_lt_caught_CXX_error" != yes;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+- *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
++ *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
++ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
++ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
+ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+- *) # Version 6 will use weak symbols
++ *) # Version 6 and above use weak symbols
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+@@ -5943,7 +6400,7 @@ if test "$_lt_caught_CXX_error" != yes;
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+@@ -5962,9 +6419,9 @@ if test "$_lt_caught_CXX_error" != yes;
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ ;;
+- xl*)
++ xl* | mpixl* | bgxl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+@@ -5984,13 +6441,13 @@ if test "$_lt_caught_CXX_error" != yes;
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+- output_verbose_link_cmd='echo'
++ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+@@ -6059,7 +6516,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+- output_verbose_link_cmd=echo
++ output_verbose_link_cmd=func_echo_all
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+@@ -6094,15 +6551,15 @@ if test "$_lt_caught_CXX_error" != yes;
+ case $host in
+ osf3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+ $RM $lib.exp'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ ;;
+@@ -6118,17 +6575,17 @@ if test "$_lt_caught_CXX_error" != yes;
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ case $host in
+ osf3*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
+
+@@ -6138,7 +6595,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+@@ -6174,7 +6631,7 @@ if test "$_lt_caught_CXX_error" != yes;
+
+ solaris*)
+ case $cc_basename in
+- CC*)
++ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+@@ -6195,7 +6652,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+- output_verbose_link_cmd='echo'
++ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+@@ -6215,14 +6672,14 @@ if test "$_lt_caught_CXX_error" != yes;
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+@@ -6233,7 +6690,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+- output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ fi
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+@@ -6287,6 +6744,10 @@ if test "$_lt_caught_CXX_error" != yes;
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
++ '"$_LT_TAGVAR(old_archive_cmds, $1)"
++ _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
++ '"$_LT_TAGVAR(reload_cmds, $1)"
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+@@ -6342,6 +6803,7 @@ if test "$_lt_caught_CXX_error" != yes;
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
++ CFLAGS=$lt_save_CFLAGS
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+@@ -6356,6 +6818,29 @@ AC_LANG_POP
+ ])# _LT_LANG_CXX_CONFIG
+
+
++# _LT_FUNC_STRIPNAME_CNF
++# ----------------------
++# func_stripname_cnf prefix suffix name
++# strip PREFIX and SUFFIX off of NAME.
++# PREFIX and SUFFIX must not contain globbing or regex special
++# characters, hashes, percent signs, but SUFFIX may contain a leading
++# dot (in which case that matches only a dot).
++#
++# This function is identical to the (non-XSI) version of func_stripname,
++# except this one can be used by m4 code that may be executed by configure,
++# rather than the libtool script.
++m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
++AC_REQUIRE([_LT_DECL_SED])
++AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
++func_stripname_cnf ()
++{
++ case ${2} in
++ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
++ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
++ esac
++} # func_stripname_cnf
++])# _LT_FUNC_STRIPNAME_CNF
++
+ # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+ # ---------------------------------
+ # Figure out "hidden" library dependencies from verbose
+@@ -6364,6 +6849,7 @@ AC_LANG_POP
+ # objects, libraries and library flags.
+ m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+ [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+ # Dependencies to place before and after the object being linked:
+ _LT_TAGVAR(predep_objects, $1)=
+ _LT_TAGVAR(postdep_objects, $1)=
+@@ -6414,6 +6900,13 @@ public class foo {
+ };
+ _LT_EOF
+ ])
++
++_lt_libdeps_save_CFLAGS=$CFLAGS
++case "$CC $CFLAGS " in #(
++*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
++*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
++esac
++
+ dnl Parse the compiler output and extract the necessary
+ dnl objects, libraries and library flags.
+ if AC_TRY_EVAL(ac_compile); then
+@@ -6425,7 +6918,7 @@ if AC_TRY_EVAL(ac_compile); then
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+- case $p in
++ case ${prev}${p} in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+@@ -6434,13 +6927,22 @@ if AC_TRY_EVAL(ac_compile); then
+ test $p = "-R"; then
+ prev=$p
+ continue
+- else
+- prev=
+ fi
+
++ # Expand the sysroot to ease extracting the directories later.
++ if test -z "$prev"; then
++ case $p in
++ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
++ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
++ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
++ esac
++ fi
++ case $p in
++ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
++ esac
+ if test "$pre_test_object_deps_done" = no; then
+- case $p in
+- -L* | -R*)
++ case ${prev} in
++ -L | -R)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+@@ -6460,8 +6962,10 @@ if AC_TRY_EVAL(ac_compile); then
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ fi
+ fi
++ prev=
+ ;;
+
++ *.lto.$objext) ;; # Ignore GCC LTO objects
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+@@ -6497,6 +7001,7 @@ else
+ fi
+
+ $RM -f confest.$objext
++CFLAGS=$_lt_libdeps_save_CFLAGS
+
+ # PORTME: override above test on systems where it is broken
+ m4_if([$1], [CXX],
+@@ -6533,7 +7038,7 @@ linux*)
+
+ solaris*)
+ case $cc_basename in
+- CC*)
++ CC* | sunCC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+@@ -6577,32 +7082,16 @@ _LT_TAGDECL([], [compiler_lib_search_pat
+ ])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+-# _LT_PROG_F77
+-# ------------
+-# Since AC_PROG_F77 is broken, in that it returns the empty string
+-# if there is no fortran compiler, we have our own version here.
+-m4_defun([_LT_PROG_F77],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+-AC_PROG_F77
+-if test -z "$F77" || test "X$F77" = "Xno"; then
+- _lt_disable_F77=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_F77
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_F77], [])
+-
+-
+ # _LT_LANG_F77_CONFIG([TAG])
+ # --------------------------
+ # Ensure that the configuration variables for a Fortran 77 compiler are
+ # suitably defined. These variables are subsequently used by _LT_CONFIG
+ # to write the compiler configuration to `libtool'.
+ m4_defun([_LT_LANG_F77_CONFIG],
+-[AC_REQUIRE([_LT_PROG_F77])dnl
+-AC_LANG_PUSH(Fortran 77)
++[AC_LANG_PUSH(Fortran 77)
++if test -z "$F77" || test "X$F77" = "Xno"; then
++ _lt_disable_F77=yes
++fi
+
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+@@ -6621,6 +7110,8 @@ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+ _LT_TAGVAR(no_undefined_flag, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+@@ -6660,7 +7151,9 @@ if test "$_lt_disable_F77" != yes; then
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
++ lt_save_CFLAGS=$CFLAGS
+ CC=${F77-"f77"}
++ CFLAGS=$FFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+@@ -6714,38 +7207,24 @@ if test "$_lt_disable_F77" != yes; then
+
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
++ CFLAGS="$lt_save_CFLAGS"
+ fi # test "$_lt_disable_F77" != yes
+
+ AC_LANG_POP
+ ])# _LT_LANG_F77_CONFIG
+
+
+-# _LT_PROG_FC
+-# -----------
+-# Since AC_PROG_FC is broken, in that it returns the empty string
+-# if there is no fortran compiler, we have our own version here.
+-m4_defun([_LT_PROG_FC],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+-AC_PROG_FC
+-if test -z "$FC" || test "X$FC" = "Xno"; then
+- _lt_disable_FC=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_FC
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_FC], [])
+-
+-
+ # _LT_LANG_FC_CONFIG([TAG])
+ # -------------------------
+ # Ensure that the configuration variables for a Fortran compiler are
+ # suitably defined. These variables are subsequently used by _LT_CONFIG
+ # to write the compiler configuration to `libtool'.
+ m4_defun([_LT_LANG_FC_CONFIG],
+-[AC_REQUIRE([_LT_PROG_FC])dnl
+-AC_LANG_PUSH(Fortran)
++[AC_LANG_PUSH(Fortran)
++
++if test -z "$FC" || test "X$FC" = "Xno"; then
++ _lt_disable_FC=yes
++fi
+
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+@@ -6764,6 +7243,8 @@ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+ _LT_TAGVAR(no_undefined_flag, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+@@ -6803,7 +7284,9 @@ if test "$_lt_disable_FC" != yes; then
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
++ lt_save_CFLAGS=$CFLAGS
+ CC=${FC-"f95"}
++ CFLAGS=$FCFLAGS
+ compiler=$CC
+ GCC=$ac_cv_fc_compiler_gnu
+
+@@ -6859,7 +7342,8 @@ if test "$_lt_disable_FC" != yes; then
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+- CC="$lt_save_CC"
++ CC=$lt_save_CC
++ CFLAGS=$lt_save_CFLAGS
+ fi # test "$_lt_disable_FC" != yes
+
+ AC_LANG_POP
+@@ -6896,10 +7380,12 @@ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+-lt_save_CC="$CC"
++lt_save_CC=$CC
++lt_save_CFLAGS=$CFLAGS
+ lt_save_GCC=$GCC
+ GCC=yes
+ CC=${GCJ-"gcj"}
++CFLAGS=$GCJFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_TAGVAR(LD, $1)="$LD"
+@@ -6909,6 +7395,8 @@ _LT_CC_BASENAME([$compiler])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+ _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+@@ -6928,7 +7416,8 @@ fi
+ AC_LANG_RESTORE
+
+ GCC=$lt_save_GCC
+-CC="$lt_save_CC"
++CC=$lt_save_CC
++CFLAGS=$lt_save_CFLAGS
+ ])# _LT_LANG_GCJ_CONFIG
+
+
+@@ -6963,9 +7452,11 @@ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
++lt_save_CFLAGS=$CFLAGS
+ lt_save_GCC=$GCC
+ GCC=
+ CC=${RC-"windres"}
++CFLAGS=
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+@@ -6978,7 +7469,8 @@ fi
+
+ GCC=$lt_save_GCC
+ AC_LANG_RESTORE
+-CC="$lt_save_CC"
++CC=$lt_save_CC
++CFLAGS=$lt_save_CFLAGS
+ ])# _LT_LANG_RC_CONFIG
+
+
+@@ -7037,6 +7529,15 @@ _LT_DECL([], [OBJDUMP], [1], [An object
+ AC_SUBST([OBJDUMP])
+ ])
+
++# _LT_DECL_DLLTOOL
++# ----------------
++# Ensure DLLTOOL variable is set.
++m4_defun([_LT_DECL_DLLTOOL],
++[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
++AC_SUBST([DLLTOOL])
++])
+
+ # _LT_DECL_SED
+ # ------------
+@@ -7130,8 +7631,8 @@ m4_defun([_LT_CHECK_SHELL_FEATURES],
+ # Try some XSI features
+ xsi_shell=no
+ ( _lt_dummy="a/b/c"
+- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+- = c,a/b,, \
++ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
++ = c,a/b,b/c, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+@@ -7170,208 +7671,162 @@ _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn
+ ])# _LT_CHECK_SHELL_FEATURES
+
+
+-# _LT_PROG_XSI_SHELLFNS
+-# ---------------------
+-# Bourne and XSI compatible variants of some useful shell functions.
+-m4_defun([_LT_PROG_XSI_SHELLFNS],
+-[case $xsi_shell in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+-}
+-
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result="${1##*/}"
+-}
+-
+-# func_dirname_and_basename file append nondir_replacement
+-# perform func_basename and func_dirname in a single function
+-# call:
+-# dirname: Compute the dirname of FILE. If nonempty,
+-# add APPEND to the result, otherwise set result
+-# to NONDIR_REPLACEMENT.
+-# value returned in "$func_dirname_result"
+-# basename: Compute filename of FILE.
+-# value retuned in "$func_basename_result"
+-# Implementation must be kept synchronized with func_dirname
+-# and func_basename. For efficiency, we do not delegate to
+-# those functions but instead duplicate the functionality here.
+-func_dirname_and_basename ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+- func_basename_result="${1##*/}"
+-}
+-
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-func_stripname ()
+-{
+- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+- # positional parameters, so assign one to ordinary parameter first.
+- func_stripname_result=${3}
+- func_stripname_result=${func_stripname_result#"${1}"}
+- func_stripname_result=${func_stripname_result%"${2}"}
+-}
+-
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=${1%%=*}
+- func_opt_split_arg=${1#*=}
+-}
+-
+-# func_lo2o object
+-func_lo2o ()
+-{
+- case ${1} in
+- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+- *) func_lo2o_result=${1} ;;
+- esac
+-}
+-
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=${1%.*}.lo
+-}
++# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
++# ------------------------------------------------------
++# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
++# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
++m4_defun([_LT_PROG_FUNCTION_REPLACE],
++[dnl {
++sed -e '/^$1 ()$/,/^} # $1 /c\
++$1 ()\
++{\
++m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
++} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++])
+
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=$(( $[*] ))
+-}
+
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=${#1}
+-}
++# _LT_PROG_REPLACE_SHELLFNS
++# -------------------------
++# Replace existing portable implementations of several shell functions with
++# equivalent extended shell implementations where those features are available..
++m4_defun([_LT_PROG_REPLACE_SHELLFNS],
++[if test x"$xsi_shell" = xyes; then
++ _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
++ case ${1} in
++ */*) func_dirname_result="${1%/*}${2}" ;;
++ * ) func_dirname_result="${3}" ;;
++ esac])
++
++ _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
++ func_basename_result="${1##*/}"])
++
++ _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
++ case ${1} in
++ */*) func_dirname_result="${1%/*}${2}" ;;
++ * ) func_dirname_result="${3}" ;;
++ esac
++ func_basename_result="${1##*/}"])
+
+-_LT_EOF
+- ;;
+- *) # Bourne compatible functions.
+- cat << \_LT_EOF >> "$cfgfile"
++ _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
++ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
++ # positional parameters, so assign one to ordinary parameter first.
++ func_stripname_result=${3}
++ func_stripname_result=${func_stripname_result#"${1}"}
++ func_stripname_result=${func_stripname_result%"${2}"}])
+
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- # Extract subdirectory from the argument.
+- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+- if test "X$func_dirname_result" = "X${1}"; then
+- func_dirname_result="${3}"
+- else
+- func_dirname_result="$func_dirname_result${2}"
+- fi
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
++ func_split_long_opt_name=${1%%=*}
++ func_split_long_opt_arg=${1#*=}])
+
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
++ func_split_short_opt_arg=${1#??}
++ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
+
+-dnl func_dirname_and_basename
+-dnl A portable version of this function is already defined in general.m4sh
+-dnl so there is no need for it here.
++ _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
++ case ${1} in
++ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
++ *) func_lo2o_result=${1} ;;
++ esac])
+
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-# func_strip_suffix prefix name
+-func_stripname ()
+-{
+- case ${2} in
+- .*) func_stripname_result=`$ECHO "X${3}" \
+- | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+- *) func_stripname_result=`$ECHO "X${3}" \
+- | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+- esac
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
+
+-# sed scripts:
+-my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+-my_sed_long_arg='1s/^-[[^=]]*=//'
++ _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
+
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+- func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
++fi
+
+-# func_lo2o object
+-func_lo2o ()
+-{
+- func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+-}
++if test x"$lt_shell_append" = xyes; then
++ _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
+
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
++ func_quote_for_eval "${2}"
++dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
++ eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
+
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=`expr "$[@]"`
+-}
+-
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+-}
++ # Save a `func_append' function call where possible by direct use of '+='
++ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++else
++ # Save a `func_append' function call even when '+=' is not available
++ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++fi
+
+-_LT_EOF
+-esac
++if test x"$_lt_function_replace_fail" = x":"; then
++ AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
++fi
++])
+
+-case $lt_shell_append in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$[1]+=\$[2]"
+-}
+-_LT_EOF
++# _LT_PATH_CONVERSION_FUNCTIONS
++# -----------------------------
++# Determine which file name conversion functions should be used by
++# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
++# for certain cross-compile configurations and native mingw.
++m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++AC_MSG_CHECKING([how to convert $build file names to $host format])
++AC_CACHE_VAL(lt_cv_to_host_file_cmd,
++[case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
++ ;;
++ esac
+ ;;
+- *)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$[1]=\$$[1]\$[2]"
+-}
+-
+-_LT_EOF
++ *-*-cygwin* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
++ ;;
++ esac
+ ;;
+- esac
++ * ) # unhandled hosts (and "normal" native builds)
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++esac
++])
++to_host_file_cmd=$lt_cv_to_host_file_cmd
++AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
++_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
++ [0], [convert $build file names to $host format])dnl
++
++AC_MSG_CHECKING([how to convert $build file names to toolchain format])
++AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
++[#assume ordinary cross tools, or native build.
++lt_cv_to_tool_file_cmd=func_convert_file_noop
++case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ esac
++ ;;
++esac
+ ])
++to_tool_file_cmd=$lt_cv_to_tool_file_cmd
++AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
++_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
++ [0], [convert $build files to toolchain format])dnl
++])# _LT_PATH_CONVERSION_FUNCTIONS
diff --git a/recipes/gnutls/gnutls_2.10.1.bb b/recipes/gnutls/gnutls_2.10.1.bb
index 480f96d..2828735 100644
--- a/recipes/gnutls/gnutls_2.10.1.bb
+++ b/recipes/gnutls/gnutls_2.10.1.bb
@@ -1,6 +1,6 @@
require gnutls.inc
-PR = "${INC_PR}.0"
+PR = "${INC_PR}.1"
LICENSE_${PN}-extra = "GPLv3"
@@ -9,6 +9,7 @@ EXTRA_OECONF += " --without-libgcrypt-prefix "
SRC_URI += "file://gettextize-with-gettext-0.18.patch \
file://gnutls-openssl.patch \
file://gnutls-replace-siginterrupt.patch \
+ ${@['','file://libtool-update.patch'][bb.data.getVar('LIBTOOL_HAS_SYSROOT', d, 1) == 'yes']} \
"
SRC_URI[gnutls.md5sum] = "b614448d7fb43ea0d4f727e6302bbf0f"
--
1.7.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* Re: [PATCH,V2 0/6] libtool 2.4 upgrade
2010-10-07 1:46 [PATCH,V2 0/6] libtool 2.4 upgrade Khem Raj
` (5 preceding siblings ...)
2010-10-07 1:46 ` [PATCH, V2 6/6] gnutls_2.10.1.bb: Update to libtools 2.4 macros Khem Raj
@ 2010-10-07 7:56 ` Koen Kooi
2010-10-07 18:31 ` Khem Raj
2010-10-11 13:13 ` Koen Kooi
7 siblings, 1 reply; 19+ messages in thread
From: Koen Kooi @ 2010-10-07 7:56 UTC (permalink / raw)
To: openembedded-devel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 07-10-10 03:46, Khem Raj wrote:
> Hi
>
> Following set of patches is v2 of the patches adding support for getting libtool 2.4 into
> openemebedded. I have so far built minimal-image for two machines successfully using old
> and new libtool.
>
> The libtool sysroot feature knob is added through LIBTOOL_HAS_SYSROOT variable. If this is
> set to "yes" then you ought to use libtool > 2.4 by default its set to "no" which means
> the current behavior remains.
>
> The big change that libtool 2.4 brings is sysroot support and I have added
> support to use this feature. It should make our life easier.
>
> This needs a lot of testing.
>
> Please cherry pick the patch bundle and give it a try in yout environment
Can you apply these to a branch so we can add fixes there if needed?
>
> Some distros pin libtool version to 2.2.6b
>
> include/preferred-slugos-versions.inc
> include/angstrom-2008-preferred-versions.inc
> include/kaeilos-2009-preferred-versions.inc
> include/angstrom-2010-preferred-versions.inc
> include/preferred-shr-versions.inc
>
> So if you are using one of these distro's then you might have
> to override the version in your local.conf
>
> LIBTOOL_HAS_SYSROOT = "yes"
> LIBTOOL_VER = "2.4"
> PREFERRED_VERSION_libtool = "${LIBTOOL_VER}"
> PREFERRED_VERSION_libtool-native = "${LIBTOOL_VER}"
> PREFERRED_VERSION_libtool-cross = "${LIBTOOL_VER}"
> PREFERRED_VERSION_libtool-nativesdk = "${LIBTOOL_VER}"
> PREFERRED_VERSION_libtool-sdk = "${LIBTOOL_VER}"
>
> Please review, test, and provide feedback
>
> Thanks
>
> -Khem
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFMrX0uMkyGM64RGpERAjNfAJ0eRV99dBkIAeDKsE/4GA9DTZcvXwCfZitH
pXRfV3B7U2f48NSxGcDq/wE=
=lbRD
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH,V2 0/6] libtool 2.4 upgrade
2010-10-07 7:56 ` [PATCH,V2 0/6] libtool 2.4 upgrade Koen Kooi
@ 2010-10-07 18:31 ` Khem Raj
2010-10-07 22:56 ` Graham Gower
2010-10-08 20:48 ` Frans Meulenbroeks
0 siblings, 2 replies; 19+ messages in thread
From: Khem Raj @ 2010-10-07 18:31 UTC (permalink / raw)
To: openembedded-devel
On Thu, Oct 7, 2010 at 12:56 AM, Koen Kooi <k.kooi@student.utwente.nl> wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On 07-10-10 03:46, Khem Raj wrote:
>> Hi
>>
>> Following set of patches is v2 of the patches adding support for getting libtool 2.4 into
>> openemebedded. I have so far built minimal-image for two machines successfully using old
>> and new libtool.
>>
>> The libtool sysroot feature knob is added through LIBTOOL_HAS_SYSROOT variable. If this is
>> set to "yes" then you ought to use libtool > 2.4 by default its set to "no" which means
>> the current behavior remains.
>>
>> The big change that libtool 2.4 brings is sysroot support and I have added
>> support to use this feature. It should make our life easier.
>>
>> This needs a lot of testing.
>>
>> Please cherry pick the patch bundle and give it a try in yout environment
>
> Can you apply these to a branch so we can add fixes there if needed?
I can do that. However now that backward compatibility is left intact I think
it would not be that bad to merge it into master and fix things on
master. the libtool
2.4 would have DEFAULT_PREFERENCE = "-1" by default it wont be picked by anyone.
with the number of developers we have it will get better testing before we
accumulate too many changes on a branch. Secondly there might be changes like
gnutls one where the patch is only valid for new libtool and should be tested
in old and new way. If there is any breakage introduced in existing build will
be caught quickly. Where as on branch resources might be divided and it may
not progress so well. I am just weighing efforts Vs. risk here and
risk seems low
Thanks
-Khem
>
>>
>> Some distros pin libtool version to 2.2.6b
>>
>> include/preferred-slugos-versions.inc
>> include/angstrom-2008-preferred-versions.inc
>> include/kaeilos-2009-preferred-versions.inc
>> include/angstrom-2010-preferred-versions.inc
>> include/preferred-shr-versions.inc
>>
>> So if you are using one of these distro's then you might have
>> to override the version in your local.conf
>>
>> LIBTOOL_HAS_SYSROOT = "yes"
>> LIBTOOL_VER = "2.4"
>> PREFERRED_VERSION_libtool = "${LIBTOOL_VER}"
>> PREFERRED_VERSION_libtool-native = "${LIBTOOL_VER}"
>> PREFERRED_VERSION_libtool-cross = "${LIBTOOL_VER}"
>> PREFERRED_VERSION_libtool-nativesdk = "${LIBTOOL_VER}"
>> PREFERRED_VERSION_libtool-sdk = "${LIBTOOL_VER}"
>>
>> Please review, test, and provide feedback
>>
>> Thanks
>>
>> -Khem
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.5 (Darwin)
>
> iD8DBQFMrX0uMkyGM64RGpERAjNfAJ0eRV99dBkIAeDKsE/4GA9DTZcvXwCfZitH
> pXRfV3B7U2f48NSxGcDq/wE=
> =lbRD
> -----END PGP SIGNATURE-----
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH,V2 0/6] libtool 2.4 upgrade
2010-10-07 18:31 ` Khem Raj
@ 2010-10-07 22:56 ` Graham Gower
2010-10-07 23:16 ` Graham Gower
2010-10-08 20:48 ` Frans Meulenbroeks
1 sibling, 1 reply; 19+ messages in thread
From: Graham Gower @ 2010-10-07 22:56 UTC (permalink / raw)
To: openembedded-devel
I've done a bitbake -k world with this patch set. Below is a list of
tasks that were found to fail with the patch, but succeeded in my last
world build without the patch (about a week ago).
atk-1.30.0-r0: do_compile:
blipomoko-0.2.99+gitr0+73ffa20d535d7bcf693981ac00d488db72dd2f68-r0: do_compile:
ccrtp-1.7.0-r0: do_compile:
clamav-0.96.3-r5.0: do_compile:
clish-0.7.3-r1: do_compile:
cwiid-0.6.00+svnr192-r0: do_compile:
dbus-hlid-1_1.0.1+gitr0+5df7f49fe8881804aaab544a569fd164c3e93afb-r0:
do_configure:
devilspie-0.22-r0: do_configure:
enchant-1.6.0-r2: do_compile:
exiv2-0.20-r0: do_compile:
fluidsynth-1.0.8-r1: do_compile:
fso-monitord-1_0.0.0+gitr0+b4ae1e9b10e710042624c2cf1a15b91a7d5b1d44-r0:
do_configure:
geda-xgsch2pcb-0.1.2-r2: do_configure:
glrr-20050529-r0: do_compile:
gputty-0.9.8-r0: do_compile:
gstreamer-0.10.30-r0: do_compile:
ibrdtn-0.4.2-r0: do_compile:
ido-0.1.6-r0: do_compile:
irdadump-0.9.16-r1: do_install:
json-glib-0.10.4-r0: do_compile:
konqueror-embedded-20070316-r7: do_configure:
libecj-bootstrap-3.6-r0: do_compile:
libgpod-0.7.92-r0: do_compile:
libsdl-ttf-2.0.9-r0: do_compile:
libvpx-0.9.1-r4.0: do_configure:
libwmf-0.2.8.4-r1: do_compile:
lxpanel-0.5.5-r0: do_compile:
mediatomb-0.11.0-r1: do_compile:
moko-gtk-engine-0.1.0+svnr4734-r0: do_compile:
mokoeightball-0.2+svnr45-r0: do_compile:
mousepad-0.2.16-r3: do_configure:
neolight-1.4.0+svnr16-r1: do_compile:
nxcompext-3.4.0-1-r0: do_compile:
openldap-2.4.23-r1: do_compile:
oprofile-0.9.6-r13.0: do_compile:
orrery-2.7-r0: do_compile:
piccontrol-0.4-r1: do_compile:
python-pygobject-native-1_2.20.0-r1: do_compile:
refdbg-1.2-r0: do_compile:
shr-today-0.0.1+gitr0+7b69649a9df0e85f0c0f7985fd1d93543c3b11e2-r3: do_compile:
telepathy-gabble-0.7.27-r0: do_configure:
toppler-1.1.3-r0: do_compile:
vmedit-0.02-r1: do_compile:
xapian-bindings-python-1.0.14-r0: do_compile:
gst-plugin-bc-0.10.1.1-r1+gitre14e249ef6cb67e91be9198b71efc61eb84c11b5:
do_configure:
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH,V2 0/6] libtool 2.4 upgrade
2010-10-07 22:56 ` Graham Gower
@ 2010-10-07 23:16 ` Graham Gower
0 siblings, 0 replies; 19+ messages in thread
From: Graham Gower @ 2010-10-07 23:16 UTC (permalink / raw)
To: openembedded-devel
On 8 October 2010 09:26, Graham Gower <graham.gower@gmail.com> wrote:
> I've done a bitbake -k world with this patch set. Below is a list of
> tasks that were found to fail with the patch, but succeeded in my last
> world build without the patch (about a week ago).
To clarify, this was done with:
LIBTOOL_HAS_SYSROOT = "yes"
LIBTOOL_VER = "2.4"
Also, there may be some false negatives here due to recipes having
things missing in their DEPENDS and the build order being semi random.
-Graham
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH,V2 0/6] libtool 2.4 upgrade
2010-10-07 18:31 ` Khem Raj
2010-10-07 22:56 ` Graham Gower
@ 2010-10-08 20:48 ` Frans Meulenbroeks
2010-10-08 22:21 ` Chris Larson
1 sibling, 1 reply; 19+ messages in thread
From: Frans Meulenbroeks @ 2010-10-08 20:48 UTC (permalink / raw)
To: openembedded-devel
2010/10/7 Khem Raj <raj.khem@gmail.com>:
> On Thu, Oct 7, 2010 at 12:56 AM, Koen Kooi <k.kooi@student.utwente.nl> wrote:
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> On 07-10-10 03:46, Khem Raj wrote:
>>> Hi
>>>
>>> Following set of patches is v2 of the patches adding support for getting libtool 2.4 into
>>> openemebedded. I have so far built minimal-image for two machines successfully using old
>>> and new libtool.
>>>
>>> The libtool sysroot feature knob is added through LIBTOOL_HAS_SYSROOT variable. If this is
>>> set to "yes" then you ought to use libtool > 2.4 by default its set to "no" which means
>>> the current behavior remains.
>>>
>>> The big change that libtool 2.4 brings is sysroot support and I have added
>>> support to use this feature. It should make our life easier.
>>>
>>> This needs a lot of testing.
>>>
>>> Please cherry pick the patch bundle and give it a try in yout environment
>>
>> Can you apply these to a branch so we can add fixes there if needed?
>
> I can do that. However now that backward compatibility is left intact I think
> it would not be that bad to merge it into master and fix things on
> master. the libtool
> 2.4 would have DEFAULT_PREFERENCE = "-1" by default it wont be picked by anyone.
> with the number of developers we have it will get better testing before we
> accumulate too many changes on a branch. Secondly there might be changes like
> gnutls one where the patch is only valid for new libtool and should be tested
> in old and new way. If there is any breakage introduced in existing build will
> be caught quickly. Where as on branch resources might be divided and it may
> not progress so well. I am just weighing efforts Vs. risk here and
> risk seems low
>
> Thanks
> -Khem
>
>>
Personally I'm in favour of merging into head. That way it gets
accepted easier and faster.
Frans.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH,V2 0/6] libtool 2.4 upgrade
2010-10-08 20:48 ` Frans Meulenbroeks
@ 2010-10-08 22:21 ` Chris Larson
2010-10-09 10:37 ` Koen Kooi
2010-10-09 11:37 ` Martin Jansa
0 siblings, 2 replies; 19+ messages in thread
From: Chris Larson @ 2010-10-08 22:21 UTC (permalink / raw)
To: openembedded-devel
On Fri, Oct 8, 2010 at 1:48 PM, Frans Meulenbroeks <
fransmeulenbroeks@gmail.com> wrote:
> 2010/10/7 Khem Raj <raj.khem@gmail.com>:
> > On Thu, Oct 7, 2010 at 12:56 AM, Koen Kooi <k.kooi@student.utwente.nl>
> wrote:
> >> -----BEGIN PGP SIGNED MESSAGE-----
> >> Hash: SHA1
> >>
> >> On 07-10-10 03:46, Khem Raj wrote:
> >>> Hi
> >>>
> >>> Following set of patches is v2 of the patches adding support for
> getting libtool 2.4 into
> >>> openemebedded. I have so far built minimal-image for two machines
> successfully using old
> >>> and new libtool.
> >>>
> >>> The libtool sysroot feature knob is added through LIBTOOL_HAS_SYSROOT
> variable. If this is
> >>> set to "yes" then you ought to use libtool > 2.4 by default its set to
> "no" which means
> >>> the current behavior remains.
> >>>
> >>> The big change that libtool 2.4 brings is sysroot support and I have
> added
> >>> support to use this feature. It should make our life easier.
> >>>
> >>> This needs a lot of testing.
> >>>
> >>> Please cherry pick the patch bundle and give it a try in yout
> environment
> >>
> >> Can you apply these to a branch so we can add fixes there if needed?
> >
> > I can do that. However now that backward compatibility is left intact I
> think
> > it would not be that bad to merge it into master and fix things on
> > master. the libtool
> > 2.4 would have DEFAULT_PREFERENCE = "-1" by default it wont be picked by
> anyone.
> > with the number of developers we have it will get better testing before
> we
> > accumulate too many changes on a branch. Secondly there might be changes
> like
> > gnutls one where the patch is only valid for new libtool and should be
> tested
> > in old and new way. If there is any breakage introduced in existing build
> will
> > be caught quickly. Where as on branch resources might be divided and it
> may
> > not progress so well. I am just weighing efforts Vs. risk here and
> > risk seems low
> >
> > Thanks
> > -Khem
> >
> >>
>
> Personally I'm in favour of merging into head. That way it gets
> accepted easier and faster.
>
Agreed, I am as well. As the new libtool is opt-in, I don't see the harm,
and it'll ensure that any issues which crop up with the compatibility get
fixed asap.
--
Christopher Larson
clarson at kergoth dot com
Founder - BitBake, OpenEmbedded, OpenZaurus
Maintainer - Tslib
Senior Software Engineer, Mentor Graphics
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH,V2 0/6] libtool 2.4 upgrade
2010-10-08 22:21 ` Chris Larson
@ 2010-10-09 10:37 ` Koen Kooi
2010-10-09 11:37 ` Martin Jansa
1 sibling, 0 replies; 19+ messages in thread
From: Koen Kooi @ 2010-10-09 10:37 UTC (permalink / raw)
To: openembedded-devel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 09-10-10 00:21, Chris Larson wrote:
> On Fri, Oct 8, 2010 at 1:48 PM, Frans Meulenbroeks <
> fransmeulenbroeks@gmail.com> wrote:
>
>> 2010/10/7 Khem Raj <raj.khem@gmail.com>:
>>> On Thu, Oct 7, 2010 at 12:56 AM, Koen Kooi <k.kooi@student.utwente.nl>
>> wrote:
>>>> -----BEGIN PGP SIGNED MESSAGE-----
>>>> Hash: SHA1
>>>>
>>>> On 07-10-10 03:46, Khem Raj wrote:
>>>>> Hi
>>>>>
>>>>> Following set of patches is v2 of the patches adding support for
>> getting libtool 2.4 into
>>>>> openemebedded. I have so far built minimal-image for two machines
>> successfully using old
>>>>> and new libtool.
>>>>>
>>>>> The libtool sysroot feature knob is added through LIBTOOL_HAS_SYSROOT
>> variable. If this is
>>>>> set to "yes" then you ought to use libtool > 2.4 by default its set to
>> "no" which means
>>>>> the current behavior remains.
>>>>>
>>>>> The big change that libtool 2.4 brings is sysroot support and I have
>> added
>>>>> support to use this feature. It should make our life easier.
>>>>>
>>>>> This needs a lot of testing.
>>>>>
>>>>> Please cherry pick the patch bundle and give it a try in yout
>> environment
>>>>
>>>> Can you apply these to a branch so we can add fixes there if needed?
>>>
>>> I can do that. However now that backward compatibility is left intact I
>> think
>>> it would not be that bad to merge it into master and fix things on
>>> master. the libtool
>>> 2.4 would have DEFAULT_PREFERENCE = "-1" by default it wont be picked by
>> anyone.
>>> with the number of developers we have it will get better testing before
>> we
>>> accumulate too many changes on a branch. Secondly there might be changes
>> like
>>> gnutls one where the patch is only valid for new libtool and should be
>> tested
>>> in old and new way. If there is any breakage introduced in existing build
>> will
>>> be caught quickly. Where as on branch resources might be divided and it
>> may
>>> not progress so well. I am just weighing efforts Vs. risk here and
>>> risk seems low
>>>
>>> Thanks
>>> -Khem
>>>
>>>>
>>
>> Personally I'm in favour of merging into head. That way it gets
>> accepted easier and faster.
>>
>
> Agreed, I am as well. As the new libtool is opt-in, I don't see the harm,
> and it'll ensure that any issues which crop up with the compatibility get
> fixed asap.
Yeah, let's get this in!
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFMsEXlMkyGM64RGpERAsjyAKCc6eHVMBOfE27SW20BiCWvs7mdXACfYG6I
1zsti6PHxpCCOGHvqWBw4zI=
=4QWi
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH,V2 0/6] libtool 2.4 upgrade
2010-10-08 22:21 ` Chris Larson
2010-10-09 10:37 ` Koen Kooi
@ 2010-10-09 11:37 ` Martin Jansa
2010-10-09 14:31 ` Khem Raj
1 sibling, 1 reply; 19+ messages in thread
From: Martin Jansa @ 2010-10-09 11:37 UTC (permalink / raw)
To: openembedded-devel
On Fri, Oct 08, 2010 at 03:21:03PM -0700, Chris Larson wrote:
> > Personally I'm in favour of merging into head. That way it gets
> > accepted easier and faster.
> >
>
> Agreed, I am as well. As the new libtool is opt-in, I don't see the harm,
> and it'll ensure that any issues which crop up with the compatibility get
> fixed asap.
Khem: feel free to add
Acked-by: Martin Jansa <Martin.Jansa@gmail.com>
--
Martin 'JaMa' Jansa jabber: Martin.Jansa@gmail.com
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH,V2 0/6] libtool 2.4 upgrade
2010-10-09 11:37 ` Martin Jansa
@ 2010-10-09 14:31 ` Khem Raj
2010-10-09 15:15 ` Koen Kooi
2010-10-09 16:45 ` Frans Meulenbroeks
0 siblings, 2 replies; 19+ messages in thread
From: Khem Raj @ 2010-10-09 14:31 UTC (permalink / raw)
To: openembedded-devel
On Sat, Oct 9, 2010 at 4:37 AM, Martin Jansa <martin.jansa@gmail.com> wrote:
> On Fri, Oct 08, 2010 at 03:21:03PM -0700, Chris Larson wrote:
>> > Personally I'm in favour of merging into head. That way it gets
>> > accepted easier and faster.
>> >
>>
>> Agreed, I am as well. As the new libtool is opt-in, I don't see the harm,
>> and it'll ensure that any issues which crop up with the compatibility get
>> fixed asap.
>
> Khem: feel free to add
> Acked-by: Martin Jansa <Martin.Jansa@gmail.com>
>
Thanks. Do I have other pseudo acks too in this thread. ?
btw libtool folks are excited that OE is using the sysroot
functionality my patch to libtool is being merged
http://lists.gnu.org/archive/html/libtool-patches/2010-10/msg00022.html
I am confident that any roadblocks we run into the libtool community
will help us
so we are in good spot.
Thanks
-Khem
> --
> Martin 'JaMa' Jansa jabber: Martin.Jansa@gmail.com
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH,V2 0/6] libtool 2.4 upgrade
2010-10-09 14:31 ` Khem Raj
@ 2010-10-09 15:15 ` Koen Kooi
2010-10-09 16:45 ` Frans Meulenbroeks
1 sibling, 0 replies; 19+ messages in thread
From: Koen Kooi @ 2010-10-09 15:15 UTC (permalink / raw)
To: openembedded-devel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
You can add:
Acked-by: Koen Kooi <k-kooi@ti.com>
to all the patches in this series
On 09-10-10 16:31, Khem Raj wrote:
> On Sat, Oct 9, 2010 at 4:37 AM, Martin Jansa <martin.jansa@gmail.com> wrote:
>> On Fri, Oct 08, 2010 at 03:21:03PM -0700, Chris Larson wrote:
>>>> Personally I'm in favour of merging into head. That way it gets
>>>> accepted easier and faster.
>>>>
>>>
>>> Agreed, I am as well. As the new libtool is opt-in, I don't see the harm,
>>> and it'll ensure that any issues which crop up with the compatibility get
>>> fixed asap.
>>
>> Khem: feel free to add
>> Acked-by: Martin Jansa <Martin.Jansa@gmail.com>
>>
>
> Thanks. Do I have other pseudo acks too in this thread. ?
> btw libtool folks are excited that OE is using the sysroot
> functionality my patch to libtool is being merged
>
> http://lists.gnu.org/archive/html/libtool-patches/2010-10/msg00022.html
>
> I am confident that any roadblocks we run into the libtool community
> will help us
> so we are in good spot.
>
> Thanks
> -Khem
>> --
>> Martin 'JaMa' Jansa jabber: Martin.Jansa@gmail.com
>>
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFMsIcFMkyGM64RGpERAmluAKCODuUg1xYz6+6PMJ8FFrmFGB7seQCgvcJZ
byUjDfN8DmnMkcPi8EisuQM=
=i0Hp
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH,V2 0/6] libtool 2.4 upgrade
2010-10-09 14:31 ` Khem Raj
2010-10-09 15:15 ` Koen Kooi
@ 2010-10-09 16:45 ` Frans Meulenbroeks
1 sibling, 0 replies; 19+ messages in thread
From: Frans Meulenbroeks @ 2010-10-09 16:45 UTC (permalink / raw)
To: openembedded-devel
2010/10/9 Khem Raj <raj.khem@gmail.com>:
> On Sat, Oct 9, 2010 at 4:37 AM, Martin Jansa <martin.jansa@gmail.com> wrote:
>> On Fri, Oct 08, 2010 at 03:21:03PM -0700, Chris Larson wrote:
>>> > Personally I'm in favour of merging into head. That way it gets
>>> > accepted easier and faster.
>>> >
>>>
>>> Agreed, I am as well. As the new libtool is opt-in, I don't see the harm,
>>> and it'll ensure that any issues which crop up with the compatibility get
>>> fixed asap.
>>
>> Khem: feel free to add
>> Acked-by: Martin Jansa <Martin.Jansa@gmail.com>
>>
>
> Thanks. Do I have other pseudo acks too in this thread. ?
> btw libtool folks are excited that OE is using the sysroot
> functionality my patch to libtool is being merged
>
As already stated on irc a few hrs ago
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Thanks for your work!
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH,V2 0/6] libtool 2.4 upgrade
2010-10-07 1:46 [PATCH,V2 0/6] libtool 2.4 upgrade Khem Raj
` (6 preceding siblings ...)
2010-10-07 7:56 ` [PATCH,V2 0/6] libtool 2.4 upgrade Koen Kooi
@ 2010-10-11 13:13 ` Koen Kooi
7 siblings, 0 replies; 19+ messages in thread
From: Koen Kooi @ 2010-10-11 13:13 UTC (permalink / raw)
To: openembedded-devel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 07-10-10 03:46, Khem Raj wrote:
> Hi
>
> Following set of patches is v2 of the patches adding support for getting libtool 2.4 into
> openemebedded. I have so far built minimal-image for two machines successfully using old
> and new libtool.
>
> The libtool sysroot feature knob is added through LIBTOOL_HAS_SYSROOT variable. If this is
> set to "yes" then you ought to use libtool > 2.4 by default its set to "no" which means
> the current behavior remains.
>
> The big change that libtool 2.4 brings is sysroot support and I have added
> support to use this feature. It should make our life easier.
>
> This needs a lot of testing.
>
> Please cherry pick the patch bundle and give it a try in yout environment
>
> Some distros pin libtool version to 2.2.6b
>
> include/preferred-slugos-versions.inc
> include/angstrom-2008-preferred-versions.inc
> include/kaeilos-2009-preferred-versions.inc
> include/angstrom-2010-preferred-versions.inc
> include/preferred-shr-versions.inc
>
> So if you are using one of these distro's then you might have
> to override the version in your local.conf
>
> LIBTOOL_HAS_SYSROOT = "yes"
> LIBTOOL_VER = "2.4"
> PREFERRED_VERSION_libtool = "${LIBTOOL_VER}"
> PREFERRED_VERSION_libtool-native = "${LIBTOOL_VER}"
> PREFERRED_VERSION_libtool-cross = "${LIBTOOL_VER}"
> PREFERRED_VERSION_libtool-nativesdk = "${LIBTOOL_VER}"
> PREFERRED_VERSION_libtool-sdk = "${LIBTOOL_VER}"
>
> Please review, test, and provide feedback
Libtool-sdk_2.4.bb was missing, so I just pushed a version that makes
pkgconfig-sdk build, but it fails in meta-toolchain since it installs
files that are clashing with binutils-sdk. Could you have a look at that
please?
regards,
Koen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFMsw2AMkyGM64RGpERArhjAKCwxaL5N2wxpCw/mxDHjNkyu3igJgCgqZ7e
xajKCa+yK0st6GL/vMg91uM=
=rT5A
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2010-10-11 13:14 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-10-07 1:46 [PATCH,V2 0/6] libtool 2.4 upgrade Khem Raj
2010-10-07 1:46 ` [PATCH,V2 1/6] libtool-2.4: Add recipes for libtool 2.4 Khem Raj
2010-10-07 1:46 ` [PATCH,V2 2/6] bitbake.conf: Define LIBTOOL_HAS_SYSROOT Khem Raj
2010-10-07 1:46 ` [PATCH, V2 3/6] autotools.bbclass: Conditionally use autotools_prepackage_lamangler Khem Raj
2010-10-07 1:46 ` [PATCH, V2 4/6] cross.bbclass, staging.bbclass, utils.bbclass: Make sure that .la munging is not done for libtool > 2.4 Khem Raj
2010-10-07 1:46 ` [PATCH, V2 5/6] insane.bbclass: If LIBTOOL_HAS_SYSROOT is set then do not check for la insanity Khem Raj
2010-10-07 1:46 ` [PATCH, V2 6/6] gnutls_2.10.1.bb: Update to libtools 2.4 macros Khem Raj
2010-10-07 7:56 ` [PATCH,V2 0/6] libtool 2.4 upgrade Koen Kooi
2010-10-07 18:31 ` Khem Raj
2010-10-07 22:56 ` Graham Gower
2010-10-07 23:16 ` Graham Gower
2010-10-08 20:48 ` Frans Meulenbroeks
2010-10-08 22:21 ` Chris Larson
2010-10-09 10:37 ` Koen Kooi
2010-10-09 11:37 ` Martin Jansa
2010-10-09 14:31 ` Khem Raj
2010-10-09 15:15 ` Koen Kooi
2010-10-09 16:45 ` Frans Meulenbroeks
2010-10-11 13:13 ` Koen Kooi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.