All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3 0/2] Add support for HwaCom AmazeTV
@ 2017-03-04 20:26 ` Carlo Caione
  0 siblings, 0 replies; 15+ messages in thread
From: Carlo Caione @ 2017-03-04 20:26 UTC (permalink / raw)
  To: linus-amlogic

From: Carlo Caione <carlo@endlessm.com>

New DTS to support the HwaCom AmazeTV based on the Meson S905X SoC.

Changelog:
 v2:
  - Changed DTS name to meson-gxl-s905x-hwacom-amazetv.dts
 v3:
  - Split patchset in two parts: DTS and documentation update
  - Makefile now sorted alphabetically
  - DTS nodes now sorted alphabetically

Carlo Caione (2):
  dt-bindings: amlogic: Add HwaCom board
  ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV

 Documentation/devicetree/bindings/arm/amlogic.txt  |   1 +
 arch/arm64/boot/dts/amlogic/Makefile               |   1 +
 .../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 164 +++++++++++++++++++++
 3 files changed, 166 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts

-- 
2.12.0

^ permalink raw reply	[flat|nested] 15+ messages in thread
* [PATCH v3 0/2] Add support for HwaCom AmazeTV
@ 2017-03-04 20:26 ` Carlo Caione
  0 siblings, 0 replies; 15+ messages in thread
From: Carlo Caione @ 2017-03-04 20:26 UTC (permalink / raw)
  To: linux-arm-kernel

From: Carlo Caione <carlo@endlessm.com>

New DTS to support the HwaCom AmazeTV based on the Meson S905X SoC.

Changelog:
 v2:
  - Changed DTS name to meson-gxl-s905x-hwacom-amazetv.dts
 v3:
  - Split patchset in two parts: DTS and documentation update
  - Makefile now sorted alphabetically
  - DTS nodes now sorted alphabetically

Carlo Caione (2):
  dt-bindings: amlogic: Add HwaCom board
  ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV

 Documentation/devicetree/bindings/arm/amlogic.txt  |   1 +
 arch/arm64/boot/dts/amlogic/Makefile               |   1 +
 .../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 164 +++++++++++++++++++++
 3 files changed, 166 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts

-- 
2.12.0

^ permalink raw reply	[flat|nested] 15+ messages in thread
* [PATCH v3 0/2] Add support for HwaCom AmazeTV
@ 2017-03-04 20:26 ` Carlo Caione
  0 siblings, 0 replies; 15+ messages in thread
From: Carlo Caione @ 2017-03-04 20:26 UTC (permalink / raw)
  To: devicetree-u79uwXL29TY76Z2rM5mHXA,
	narmstrong-rdvid1DuHRBWk0Htik3J/w, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
	linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-6IF/jdPJHihWk0Htik3J/w, afaerber-l3A5Bk7waGM,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
  Cc: Carlo Caione

From: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>

New DTS to support the HwaCom AmazeTV based on the Meson S905X SoC.

Changelog:
 v2:
  - Changed DTS name to meson-gxl-s905x-hwacom-amazetv.dts
 v3:
  - Split patchset in two parts: DTS and documentation update
  - Makefile now sorted alphabetically
  - DTS nodes now sorted alphabetically

Carlo Caione (2):
  dt-bindings: amlogic: Add HwaCom board
  ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV

 Documentation/devicetree/bindings/arm/amlogic.txt  |   1 +
 arch/arm64/boot/dts/amlogic/Makefile               |   1 +
 .../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 164 +++++++++++++++++++++
 3 files changed, 166 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts

-- 
2.12.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 15+ messages in thread
* [PATCH v3 1/2] dt-bindings: amlogic: Add HwaCom board
  2017-03-04 20:26 ` Carlo Caione
  (?)
@ 2017-03-04 20:26   ` Carlo Caione
  -1 siblings, 0 replies; 15+ messages in thread
From: Carlo Caione @ 2017-03-04 20:26 UTC (permalink / raw)
  To: linus-amlogic

From: Carlo Caione <carlo@endlessm.com>

Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
 Documentation/devicetree/bindings/arm/amlogic.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index c246cd2730d9..b3241a6802f6 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -45,6 +45,7 @@ Board compatible values:
   - "amlogic,p212" (Meson gxl s905x)
   - "amlogic,p230" (Meson gxl s905d)
   - "amlogic,p231" (Meson gxl s905d)
+  - "hwacom,amazetv" (Meson gxl s905x)
   - "amlogic,q200" (Meson gxm s912)
   - "amlogic,q201" (Meson gxm s912)
   - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
-- 
2.12.0

^ permalink raw reply related	[flat|nested] 15+ messages in thread
* [PATCH v3 1/2] dt-bindings: amlogic: Add HwaCom board
@ 2017-03-04 20:26   ` Carlo Caione
  0 siblings, 0 replies; 15+ messages in thread
From: Carlo Caione @ 2017-03-04 20:26 UTC (permalink / raw)
  To: linux-arm-kernel

From: Carlo Caione <carlo@endlessm.com>

Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
 Documentation/devicetree/bindings/arm/amlogic.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index c246cd2730d9..b3241a6802f6 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -45,6 +45,7 @@ Board compatible values:
   - "amlogic,p212" (Meson gxl s905x)
   - "amlogic,p230" (Meson gxl s905d)
   - "amlogic,p231" (Meson gxl s905d)
+  - "hwacom,amazetv" (Meson gxl s905x)
   - "amlogic,q200" (Meson gxm s912)
   - "amlogic,q201" (Meson gxm s912)
   - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
-- 
2.12.0

^ permalink raw reply related	[flat|nested] 15+ messages in thread
* [PATCH v3 1/2] dt-bindings: amlogic: Add HwaCom board
@ 2017-03-04 20:26   ` Carlo Caione
  0 siblings, 0 replies; 15+ messages in thread
From: Carlo Caione @ 2017-03-04 20:26 UTC (permalink / raw)
  To: devicetree-u79uwXL29TY76Z2rM5mHXA,
	narmstrong-rdvid1DuHRBWk0Htik3J/w, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
	linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-6IF/jdPJHihWk0Htik3J/w, afaerber-l3A5Bk7waGM,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
  Cc: Carlo Caione

From: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>

Signed-off-by: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
---
 Documentation/devicetree/bindings/arm/amlogic.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index c246cd2730d9..b3241a6802f6 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -45,6 +45,7 @@ Board compatible values:
   - "amlogic,p212" (Meson gxl s905x)
   - "amlogic,p230" (Meson gxl s905d)
   - "amlogic,p231" (Meson gxl s905d)
+  - "hwacom,amazetv" (Meson gxl s905x)
   - "amlogic,q200" (Meson gxm s912)
   - "amlogic,q201" (Meson gxm s912)
   - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
-- 
2.12.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 15+ messages in thread
* [PATCH v3 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV
  2017-03-04 20:26 ` Carlo Caione
  (?)
@ 2017-03-04 20:26   ` Carlo Caione
  -1 siblings, 0 replies; 15+ messages in thread
From: Carlo Caione @ 2017-03-04 20:26 UTC (permalink / raw)
  To: linus-amlogic

From: Carlo Caione <carlo@endlessm.com>

This patch adds support for the HwaCom AmazeTV set-top-box. The
hardware configuration is really similar to the other GXL boards but
for this hardware we need to limit the max-frequency of the eMMC to
have it working.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
 arch/arm64/boot/dts/amlogic/Makefile               |   1 +
 .../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 164 +++++++++++++++++++++
 2 files changed, 165 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 3f94bce33b7f..99ddfc8087d1 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
new file mode 100644
index 000000000000..2a5804ce7f4b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
@@ -0,0 +1,164 @@
+/*
+ * Copyright (c) 2017 Carlo Caione
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@kernel.org>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "hwacom,amazetv", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "Hwacom AmazeTV (S905X)";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	vddio_card: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+
+		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
+		states = <1800000 0
+			  3300000 1>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	max-frequency = <100000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
-- 
2.12.0

^ permalink raw reply related	[flat|nested] 15+ messages in thread
* [PATCH v3 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV
@ 2017-03-04 20:26   ` Carlo Caione
  0 siblings, 0 replies; 15+ messages in thread
From: Carlo Caione @ 2017-03-04 20:26 UTC (permalink / raw)
  To: linux-arm-kernel

From: Carlo Caione <carlo@endlessm.com>

This patch adds support for the HwaCom AmazeTV set-top-box. The
hardware configuration is really similar to the other GXL boards but
for this hardware we need to limit the max-frequency of the eMMC to
have it working.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
 arch/arm64/boot/dts/amlogic/Makefile               |   1 +
 .../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 164 +++++++++++++++++++++
 2 files changed, 165 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 3f94bce33b7f..99ddfc8087d1 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
new file mode 100644
index 000000000000..2a5804ce7f4b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
@@ -0,0 +1,164 @@
+/*
+ * Copyright (c) 2017 Carlo Caione
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@kernel.org>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "hwacom,amazetv", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "Hwacom AmazeTV (S905X)";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	vddio_card: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+
+		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
+		states = <1800000 0
+			  3300000 1>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	max-frequency = <100000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
-- 
2.12.0

^ permalink raw reply related	[flat|nested] 15+ messages in thread
* [PATCH v3 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV
@ 2017-03-04 20:26   ` Carlo Caione
  0 siblings, 0 replies; 15+ messages in thread
From: Carlo Caione @ 2017-03-04 20:26 UTC (permalink / raw)
  To: devicetree-u79uwXL29TY76Z2rM5mHXA,
	narmstrong-rdvid1DuHRBWk0Htik3J/w, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
	linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-6IF/jdPJHihWk0Htik3J/w, afaerber-l3A5Bk7waGM,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
  Cc: Carlo Caione

From: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>

This patch adds support for the HwaCom AmazeTV set-top-box. The
hardware configuration is really similar to the other GXL boards but
for this hardware we need to limit the max-frequency of the eMMC to
have it working.

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
---
 arch/arm64/boot/dts/amlogic/Makefile               |   1 +
 .../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 164 +++++++++++++++++++++
 2 files changed, 165 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 3f94bce33b7f..99ddfc8087d1 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
new file mode 100644
index 000000000000..2a5804ce7f4b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
@@ -0,0 +1,164 @@
+/*
+ * Copyright (c) 2017 Carlo Caione
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "hwacom,amazetv", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "Hwacom AmazeTV (S905X)";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	vddio_card: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+
+		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
+		states = <1800000 0
+			  3300000 1>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	max-frequency = <100000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
-- 
2.12.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 15+ messages in thread
* [PATCH v3 0/2] Add support for HwaCom AmazeTV
  2017-03-04 20:26 ` Carlo Caione
  (?)
@ 2017-03-10 22:13   ` Kevin Hilman
  -1 siblings, 0 replies; 15+ messages in thread
From: Kevin Hilman @ 2017-03-10 22:13 UTC (permalink / raw)
  To: linus-amlogic

Carlo Caione <carlo@caione.org> writes:

> From: Carlo Caione <carlo@endlessm.com>
>
> New DTS to support the HwaCom AmazeTV based on the Meson S905X SoC.
>
> Changelog:
>  v2:
>   - Changed DTS name to meson-gxl-s905x-hwacom-amazetv.dts
>  v3:
>   - Split patchset in two parts: DTS and documentation update
>   - Makefile now sorted alphabetically
>   - DTS nodes now sorted alphabetically
>
> Carlo Caione (2):
>   dt-bindings: amlogic: Add HwaCom board
>   ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV

Applied to v4.12/dt64

Kevin

^ permalink raw reply	[flat|nested] 15+ messages in thread
* [PATCH v3 0/2] Add support for HwaCom AmazeTV
@ 2017-03-10 22:13   ` Kevin Hilman
  0 siblings, 0 replies; 15+ messages in thread
From: Kevin Hilman @ 2017-03-10 22:13 UTC (permalink / raw)
  To: linux-arm-kernel

Carlo Caione <carlo@caione.org> writes:

> From: Carlo Caione <carlo@endlessm.com>
>
> New DTS to support the HwaCom AmazeTV based on the Meson S905X SoC.
>
> Changelog:
>  v2:
>   - Changed DTS name to meson-gxl-s905x-hwacom-amazetv.dts
>  v3:
>   - Split patchset in two parts: DTS and documentation update
>   - Makefile now sorted alphabetically
>   - DTS nodes now sorted alphabetically
>
> Carlo Caione (2):
>   dt-bindings: amlogic: Add HwaCom board
>   ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV

Applied to v4.12/dt64

Kevin

^ permalink raw reply	[flat|nested] 15+ messages in thread
* Re: [PATCH v3 0/2] Add support for HwaCom AmazeTV
@ 2017-03-10 22:13   ` Kevin Hilman
  0 siblings, 0 replies; 15+ messages in thread
From: Kevin Hilman @ 2017-03-10 22:13 UTC (permalink / raw)
  To: Carlo Caione
  Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
	narmstrong-rdvid1DuHRBWk0Htik3J/w, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
	linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-6IF/jdPJHihWk0Htik3J/w, afaerber-l3A5Bk7waGM,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Carlo Caione

Carlo Caione <carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org> writes:

> From: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
>
> New DTS to support the HwaCom AmazeTV based on the Meson S905X SoC.
>
> Changelog:
>  v2:
>   - Changed DTS name to meson-gxl-s905x-hwacom-amazetv.dts
>  v3:
>   - Split patchset in two parts: DTS and documentation update
>   - Makefile now sorted alphabetically
>   - DTS nodes now sorted alphabetically
>
> Carlo Caione (2):
>   dt-bindings: amlogic: Add HwaCom board
>   ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV

Applied to v4.12/dt64

Kevin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 15+ messages in thread
* [PATCH v3 1/2] dt-bindings: amlogic: Add HwaCom board
  2017-03-04 20:26   ` Carlo Caione
  (?)
@ 2017-03-15 19:55     ` Rob Herring
  -1 siblings, 0 replies; 15+ messages in thread
From: Rob Herring @ 2017-03-15 19:55 UTC (permalink / raw)
  To: linus-amlogic

On Sat, Mar 04, 2017 at 09:26:23PM +0100, Carlo Caione wrote:
> From: Carlo Caione <carlo@endlessm.com>
> 
> Signed-off-by: Carlo Caione <carlo@endlessm.com>
> ---
>  Documentation/devicetree/bindings/arm/amlogic.txt | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 15+ messages in thread
* [PATCH v3 1/2] dt-bindings: amlogic: Add HwaCom board
@ 2017-03-15 19:55     ` Rob Herring
  0 siblings, 0 replies; 15+ messages in thread
From: Rob Herring @ 2017-03-15 19:55 UTC (permalink / raw)
  To: linux-arm-kernel

On Sat, Mar 04, 2017 at 09:26:23PM +0100, Carlo Caione wrote:
> From: Carlo Caione <carlo@endlessm.com>
> 
> Signed-off-by: Carlo Caione <carlo@endlessm.com>
> ---
>  Documentation/devicetree/bindings/arm/amlogic.txt | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 15+ messages in thread
* Re: [PATCH v3 1/2] dt-bindings: amlogic: Add HwaCom board
@ 2017-03-15 19:55     ` Rob Herring
  0 siblings, 0 replies; 15+ messages in thread
From: Rob Herring @ 2017-03-15 19:55 UTC (permalink / raw)
  To: Carlo Caione
  Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
	narmstrong-rdvid1DuHRBWk0Htik3J/w,
	linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-6IF/jdPJHihWk0Htik3J/w, afaerber-l3A5Bk7waGM,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Carlo Caione

On Sat, Mar 04, 2017 at 09:26:23PM +0100, Carlo Caione wrote:
> From: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
> 
> Signed-off-by: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/arm/amlogic.txt | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 15+ messages in thread
end of thread, other threads:[~2017-03-15 19:55 UTC | newest]

Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-03-04 20:26 [PATCH v3 0/2] Add support for HwaCom AmazeTV Carlo Caione
2017-03-04 20:26 ` Carlo Caione
2017-03-04 20:26 ` Carlo Caione
2017-03-04 20:26 ` [PATCH v3 1/2] dt-bindings: amlogic: Add HwaCom board Carlo Caione
2017-03-04 20:26   ` Carlo Caione
2017-03-04 20:26   ` Carlo Caione
2017-03-15 19:55   ` Rob Herring
2017-03-15 19:55     ` Rob Herring
2017-03-15 19:55     ` Rob Herring
2017-03-04 20:26 ` [PATCH v3 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV Carlo Caione
2017-03-04 20:26   ` Carlo Caione
2017-03-04 20:26   ` Carlo Caione
2017-03-10 22:13 ` [PATCH v3 0/2] " Kevin Hilman
2017-03-10 22:13   ` Kevin Hilman
2017-03-10 22:13   ` Kevin Hilman

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.