* [PATCH 0/2] Add support for HwaCom AmazeTV @ 2017-02-22 16:31 ` Carlo Caione 0 siblings, 0 replies; 36+ messages in thread From: Carlo Caione @ 2017-02-22 16:31 UTC (permalink / raw) To: linus-amlogic From: Carlo Caione <carlo@endlessm.com> Add support for HwaCom AmazeTV, one more S905X board. v2: - Switch to SPDX tag - Added Acked-by on 2/2 - Fixed capslock on model name Carlo Caione (2): devicetree: Add vendor prefix for Hwacom Systems Inc. ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV Documentation/devicetree/bindings/arm/amlogic.txt | 1 + .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts | 164 +++++++++++++++++++++ 4 files changed, 167 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts -- 2.9.3 ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 0/2] Add support for HwaCom AmazeTV @ 2017-02-22 16:31 ` Carlo Caione 0 siblings, 0 replies; 36+ messages in thread From: Carlo Caione @ 2017-02-22 16:31 UTC (permalink / raw) To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, khilman-rdvid1DuHRBWk0Htik3J/w, narmstrong-rdvid1DuHRBWk0Htik3J/w, afaerber-l3A5Bk7waGM, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-6IF/jdPJHihWk0Htik3J/w Cc: Carlo Caione From: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org> Add support for HwaCom AmazeTV, one more S905X board. v2: - Switch to SPDX tag - Added Acked-by on 2/2 - Fixed capslock on model name Carlo Caione (2): devicetree: Add vendor prefix for Hwacom Systems Inc. ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV Documentation/devicetree/bindings/arm/amlogic.txt | 1 + .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts | 164 +++++++++++++++++++++ 4 files changed, 167 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 0/2] Add support for HwaCom AmazeTV @ 2017-02-22 16:31 ` Carlo Caione 0 siblings, 0 replies; 36+ messages in thread From: Carlo Caione @ 2017-02-22 16:31 UTC (permalink / raw) To: linux-arm-kernel From: Carlo Caione <carlo@endlessm.com> Add support for HwaCom AmazeTV, one more S905X board. v2: - Switch to SPDX tag - Added Acked-by on 2/2 - Fixed capslock on model name Carlo Caione (2): devicetree: Add vendor prefix for Hwacom Systems Inc. ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV Documentation/devicetree/bindings/arm/amlogic.txt | 1 + .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts | 164 +++++++++++++++++++++ 4 files changed, 167 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts -- 2.9.3 ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. 2017-02-22 16:31 ` Carlo Caione (?) @ 2017-02-22 16:31 ` Carlo Caione -1 siblings, 0 replies; 36+ messages in thread From: Carlo Caione @ 2017-02-22 16:31 UTC (permalink / raw) To: linus-amlogic From: Carlo Caione <carlo@endlessm.com> Hwacom Systems Inc. is a broadband system integrator and supplier of mobile, fixed and IP networks related services as well as multimedia application. Website: http://www.hwacom.com/ Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 16d3b5e..a1704a6 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -131,6 +131,7 @@ holt Holt Integrated Circuits, Inc. honeywell Honeywell hp Hewlett Packard holtek Holtek Semiconductor, Inc. +hwacom HwaCom Systems Inc. i2se I2SE GmbH ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. -- 2.9.3 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. @ 2017-02-22 16:31 ` Carlo Caione 0 siblings, 0 replies; 36+ messages in thread From: Carlo Caione @ 2017-02-22 16:31 UTC (permalink / raw) To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, khilman-rdvid1DuHRBWk0Htik3J/w, narmstrong-rdvid1DuHRBWk0Htik3J/w, afaerber-l3A5Bk7waGM, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-6IF/jdPJHihWk0Htik3J/w Cc: Carlo Caione From: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org> Hwacom Systems Inc. is a broadband system integrator and supplier of mobile, fixed and IP networks related services as well as multimedia application. Website: http://www.hwacom.com/ Signed-off-by: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 16d3b5e..a1704a6 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -131,6 +131,7 @@ holt Holt Integrated Circuits, Inc. honeywell Honeywell hp Hewlett Packard holtek Holtek Semiconductor, Inc. +hwacom HwaCom Systems Inc. i2se I2SE GmbH ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. @ 2017-02-22 16:31 ` Carlo Caione 0 siblings, 0 replies; 36+ messages in thread From: Carlo Caione @ 2017-02-22 16:31 UTC (permalink / raw) To: linux-arm-kernel From: Carlo Caione <carlo@endlessm.com> Hwacom Systems Inc. is a broadband system integrator and supplier of mobile, fixed and IP networks related services as well as multimedia application. Website: http://www.hwacom.com/ Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 16d3b5e..a1704a6 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -131,6 +131,7 @@ holt Holt Integrated Circuits, Inc. honeywell Honeywell hp Hewlett Packard holtek Holtek Semiconductor, Inc. +hwacom HwaCom Systems Inc. i2se I2SE GmbH ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. -- 2.9.3 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. 2017-02-22 16:31 ` Carlo Caione (?) @ 2017-03-03 18:57 ` Kevin Hilman -1 siblings, 0 replies; 36+ messages in thread From: Kevin Hilman @ 2017-03-03 18:57 UTC (permalink / raw) To: linus-amlogic Carlo Caione <carlo@caione.org> writes: > From: Carlo Caione <carlo@endlessm.com> > > Hwacom Systems Inc. is a broadband system integrator and supplier of > mobile, fixed and IP networks related services as well as > multimedia application. Website: http://www.hwacom.com/ > > Signed-off-by: Carlo Caione <carlo@endlessm.com> > Acked-by: Rob Herring <robh@kernel.org> Applied to v4.12/dt64 after changing subject prefix to "dt-bindings:" Kevin > --- > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > index 16d3b5e..a1704a6 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -131,6 +131,7 @@ holt Holt Integrated Circuits, Inc. > honeywell Honeywell > hp Hewlett Packard > holtek Holtek Semiconductor, Inc. > +hwacom HwaCom Systems Inc. > i2se I2SE GmbH > ibm International Business Machines (IBM) > idt Integrated Device Technologies, Inc. ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. @ 2017-03-03 18:57 ` Kevin Hilman 0 siblings, 0 replies; 36+ messages in thread From: Kevin Hilman @ 2017-03-03 18:57 UTC (permalink / raw) To: Carlo Caione Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, narmstrong-rdvid1DuHRBWk0Htik3J/w, afaerber-l3A5Bk7waGM, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-6IF/jdPJHihWk0Htik3J/w, Carlo Caione Carlo Caione <carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org> writes: > From: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org> > > Hwacom Systems Inc. is a broadband system integrator and supplier of > mobile, fixed and IP networks related services as well as > multimedia application. Website: http://www.hwacom.com/ > > Signed-off-by: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org> > Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> Applied to v4.12/dt64 after changing subject prefix to "dt-bindings:" Kevin > --- > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > index 16d3b5e..a1704a6 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -131,6 +131,7 @@ holt Holt Integrated Circuits, Inc. > honeywell Honeywell > hp Hewlett Packard > holtek Holtek Semiconductor, Inc. > +hwacom HwaCom Systems Inc. > i2se I2SE GmbH > ibm International Business Machines (IBM) > idt Integrated Device Technologies, Inc. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. @ 2017-03-03 18:57 ` Kevin Hilman 0 siblings, 0 replies; 36+ messages in thread From: Kevin Hilman @ 2017-03-03 18:57 UTC (permalink / raw) To: linux-arm-kernel Carlo Caione <carlo@caione.org> writes: > From: Carlo Caione <carlo@endlessm.com> > > Hwacom Systems Inc. is a broadband system integrator and supplier of > mobile, fixed and IP networks related services as well as > multimedia application. Website: http://www.hwacom.com/ > > Signed-off-by: Carlo Caione <carlo@endlessm.com> > Acked-by: Rob Herring <robh@kernel.org> Applied to v4.12/dt64 after changing subject prefix to "dt-bindings:" Kevin > --- > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > index 16d3b5e..a1704a6 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -131,6 +131,7 @@ holt Holt Integrated Circuits, Inc. > honeywell Honeywell > hp Hewlett Packard > holtek Holtek Semiconductor, Inc. > +hwacom HwaCom Systems Inc. > i2se I2SE GmbH > ibm International Business Machines (IBM) > idt Integrated Device Technologies, Inc. ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV 2017-02-22 16:31 ` Carlo Caione (?) @ 2017-02-22 16:31 ` Carlo Caione -1 siblings, 0 replies; 36+ messages in thread From: Carlo Caione @ 2017-02-22 16:31 UTC (permalink / raw) To: linus-amlogic From: Carlo Caione <carlo@endlessm.com> This patch adds support for the HwaCom AmazeTV set-top-box. The hardware configuration is really similar to the other GXL boards but for this hardware we need to limit the max-frequency of the eMMC to have it working. Signed-off-by: Carlo Caione <carlo@endlessm.com> --- Documentation/devicetree/bindings/arm/amlogic.txt | 1 + arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts | 164 +++++++++++++++++++++ 3 files changed, 166 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 9b2b41a..c369a55 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -47,3 +47,4 @@ Board compatible values: - "amlogic,q201" (Meson gxm s912) - "nexbox,a95x" (Meson gxbb or Meson gxl s905x) - "nexbox,a1" (Meson gxm s912) + - "hwacom,amazetv" (Meson gxl s905x) diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 0d7bfbf..2932755 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-nexbox-a95x.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-hwacom-amazetv.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts new file mode 100644 index 0000000..9a2c60d --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts @@ -0,0 +1,164 @@ +/* + * Copyright (c) 2017 Carlo Caione + * Copyright (c) 2016 BayLibre, Inc. + * Author: Neil Armstrong <narmstrong@kernel.org> + * + * SPDX-License-Identifier: GPL-2.0+ OR MIT + */ + +/dts-v1/; + +#include "meson-gxl-s905x.dtsi" + +/ { + compatible = "hwacom,amazetv", "amlogic,s905x", "amlogic,meson-gxl"; + model = "Hwacom AmazeTV (S905X)"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory at 0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + vddio_card: gpio-regulator { + compatible = "regulator-gpio"; + + regulator-name = "VDDIO_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + + /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ + states = <1800000 0 + 3300000 1>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +ðmac { + status = "okay"; + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_card>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <100000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; -- 2.9.3 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV @ 2017-02-22 16:31 ` Carlo Caione 0 siblings, 0 replies; 36+ messages in thread From: Carlo Caione @ 2017-02-22 16:31 UTC (permalink / raw) To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, khilman-rdvid1DuHRBWk0Htik3J/w, narmstrong-rdvid1DuHRBWk0Htik3J/w, afaerber-l3A5Bk7waGM, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-6IF/jdPJHihWk0Htik3J/w Cc: Carlo Caione From: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org> This patch adds support for the HwaCom AmazeTV set-top-box. The hardware configuration is really similar to the other GXL boards but for this hardware we need to limit the max-frequency of the eMMC to have it working. Signed-off-by: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org> --- Documentation/devicetree/bindings/arm/amlogic.txt | 1 + arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts | 164 +++++++++++++++++++++ 3 files changed, 166 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 9b2b41a..c369a55 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -47,3 +47,4 @@ Board compatible values: - "amlogic,q201" (Meson gxm s912) - "nexbox,a95x" (Meson gxbb or Meson gxl s905x) - "nexbox,a1" (Meson gxm s912) + - "hwacom,amazetv" (Meson gxl s905x) diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 0d7bfbf..2932755 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-nexbox-a95x.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-hwacom-amazetv.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts new file mode 100644 index 0000000..9a2c60d --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts @@ -0,0 +1,164 @@ +/* + * Copyright (c) 2017 Carlo Caione + * Copyright (c) 2016 BayLibre, Inc. + * Author: Neil Armstrong <narmstrong-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> + * + * SPDX-License-Identifier: GPL-2.0+ OR MIT + */ + +/dts-v1/; + +#include "meson-gxl-s905x.dtsi" + +/ { + compatible = "hwacom,amazetv", "amlogic,s905x", "amlogic,meson-gxl"; + model = "Hwacom AmazeTV (S905X)"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + vddio_card: gpio-regulator { + compatible = "regulator-gpio"; + + regulator-name = "VDDIO_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + + /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ + states = <1800000 0 + 3300000 1>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +ðmac { + status = "okay"; + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_card>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <100000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV @ 2017-02-22 16:31 ` Carlo Caione 0 siblings, 0 replies; 36+ messages in thread From: Carlo Caione @ 2017-02-22 16:31 UTC (permalink / raw) To: linux-arm-kernel From: Carlo Caione <carlo@endlessm.com> This patch adds support for the HwaCom AmazeTV set-top-box. The hardware configuration is really similar to the other GXL boards but for this hardware we need to limit the max-frequency of the eMMC to have it working. Signed-off-by: Carlo Caione <carlo@endlessm.com> --- Documentation/devicetree/bindings/arm/amlogic.txt | 1 + arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts | 164 +++++++++++++++++++++ 3 files changed, 166 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 9b2b41a..c369a55 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -47,3 +47,4 @@ Board compatible values: - "amlogic,q201" (Meson gxm s912) - "nexbox,a95x" (Meson gxbb or Meson gxl s905x) - "nexbox,a1" (Meson gxm s912) + - "hwacom,amazetv" (Meson gxl s905x) diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 0d7bfbf..2932755 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-nexbox-a95x.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-hwacom-amazetv.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts new file mode 100644 index 0000000..9a2c60d --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts @@ -0,0 +1,164 @@ +/* + * Copyright (c) 2017 Carlo Caione + * Copyright (c) 2016 BayLibre, Inc. + * Author: Neil Armstrong <narmstrong@kernel.org> + * + * SPDX-License-Identifier: GPL-2.0+ OR MIT + */ + +/dts-v1/; + +#include "meson-gxl-s905x.dtsi" + +/ { + compatible = "hwacom,amazetv", "amlogic,s905x", "amlogic,meson-gxl"; + model = "Hwacom AmazeTV (S905X)"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory at 0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + vddio_card: gpio-regulator { + compatible = "regulator-gpio"; + + regulator-name = "VDDIO_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + + /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ + states = <1800000 0 + 3300000 1>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +ðmac { + status = "okay"; + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_card>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <100000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; -- 2.9.3 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV 2017-02-22 16:31 ` Carlo Caione (?) @ 2017-02-27 22:58 ` Rob Herring -1 siblings, 0 replies; 36+ messages in thread From: Rob Herring @ 2017-02-27 22:58 UTC (permalink / raw) To: linus-amlogic On Wed, Feb 22, 2017 at 05:31:31PM +0100, Carlo Caione wrote: > From: Carlo Caione <carlo@endlessm.com> > > This patch adds support for the HwaCom AmazeTV set-top-box. The > hardware configuration is really similar to the other GXL boards but > for this hardware we need to limit the max-frequency of the eMMC to > have it working. > > Signed-off-by: Carlo Caione <carlo@endlessm.com> > --- > Documentation/devicetree/bindings/arm/amlogic.txt | 1 + > arch/arm64/boot/dts/amlogic/Makefile | 1 + > .../boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts | 164 +++++++++++++++++++++ > 3 files changed, 166 insertions(+) > create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV @ 2017-02-27 22:58 ` Rob Herring 0 siblings, 0 replies; 36+ messages in thread From: Rob Herring @ 2017-02-27 22:58 UTC (permalink / raw) To: Carlo Caione Cc: devicetree, narmstrong, khilman, Carlo Caione, linux-amlogic, linux, afaerber, linux-arm-kernel On Wed, Feb 22, 2017 at 05:31:31PM +0100, Carlo Caione wrote: > From: Carlo Caione <carlo@endlessm.com> > > This patch adds support for the HwaCom AmazeTV set-top-box. The > hardware configuration is really similar to the other GXL boards but > for this hardware we need to limit the max-frequency of the eMMC to > have it working. > > Signed-off-by: Carlo Caione <carlo@endlessm.com> > --- > Documentation/devicetree/bindings/arm/amlogic.txt | 1 + > arch/arm64/boot/dts/amlogic/Makefile | 1 + > .../boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts | 164 +++++++++++++++++++++ > 3 files changed, 166 insertions(+) > create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV @ 2017-02-27 22:58 ` Rob Herring 0 siblings, 0 replies; 36+ messages in thread From: Rob Herring @ 2017-02-27 22:58 UTC (permalink / raw) To: linux-arm-kernel On Wed, Feb 22, 2017 at 05:31:31PM +0100, Carlo Caione wrote: > From: Carlo Caione <carlo@endlessm.com> > > This patch adds support for the HwaCom AmazeTV set-top-box. The > hardware configuration is really similar to the other GXL boards but > for this hardware we need to limit the max-frequency of the eMMC to > have it working. > > Signed-off-by: Carlo Caione <carlo@endlessm.com> > --- > Documentation/devicetree/bindings/arm/amlogic.txt | 1 + > arch/arm64/boot/dts/amlogic/Makefile | 1 + > .../boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts | 164 +++++++++++++++++++++ > 3 files changed, 166 insertions(+) > create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV 2017-02-22 16:31 ` Carlo Caione (?) @ 2017-03-03 19:00 ` Kevin Hilman -1 siblings, 0 replies; 36+ messages in thread From: Kevin Hilman @ 2017-03-03 19:00 UTC (permalink / raw) To: linus-amlogic Carlo Caione <carlo@caione.org> writes: > From: Carlo Caione <carlo@endlessm.com> > > This patch adds support for the HwaCom AmazeTV set-top-box. The > hardware configuration is really similar to the other GXL boards but > for this hardware we need to limit the max-frequency of the eMMC to > have it working. > > Signed-off-by: Carlo Caione <carlo@endlessm.com> > --- > Documentation/devicetree/bindings/arm/amlogic.txt | 1 + > arch/arm64/boot/dts/amlogic/Makefile | 1 + > .../boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts | 164 +++++++++++++++++++++ nit: this should be meson-gxl-s905x-* Looks like you followed the pattern of the GXL nexbox, but that's now fixed in linux-next too. Kevin > 3 files changed, 166 insertions(+) > create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts > > diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt > index 9b2b41a..c369a55 100644 > --- a/Documentation/devicetree/bindings/arm/amlogic.txt > +++ b/Documentation/devicetree/bindings/arm/amlogic.txt > @@ -47,3 +47,4 @@ Board compatible values: > - "amlogic,q201" (Meson gxm s912) > - "nexbox,a95x" (Meson gxbb or Meson gxl s905x) > - "nexbox,a1" (Meson gxm s912) > + - "hwacom,amazetv" (Meson gxl s905x) > diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile > index 0d7bfbf..2932755 100644 > --- a/arch/arm64/boot/dts/amlogic/Makefile > +++ b/arch/arm64/boot/dts/amlogic/Makefile > @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-nexbox-a95x.dtb > +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-hwacom-amazetv.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q200.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q201.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts > new file mode 100644 > index 0000000..9a2c60d > --- /dev/null > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts > @@ -0,0 +1,164 @@ > +/* > + * Copyright (c) 2017 Carlo Caione > + * Copyright (c) 2016 BayLibre, Inc. > + * Author: Neil Armstrong <narmstrong@kernel.org> > + * > + * SPDX-License-Identifier: GPL-2.0+ OR MIT > + */ > + > +/dts-v1/; > + > +#include "meson-gxl-s905x.dtsi" > + > +/ { > + compatible = "hwacom,amazetv", "amlogic,s905x", "amlogic,meson-gxl"; > + model = "Hwacom AmazeTV (S905X)"; > + > + aliases { > + serial0 = &uart_AO; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + memory at 0 { > + device_type = "memory"; > + reg = <0x0 0x0 0x0 0x80000000>; > + }; > + > + vddio_card: gpio-regulator { > + compatible = "regulator-gpio"; > + > + regulator-name = "VDDIO_CARD"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + > + gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; > + gpios-states = <1>; > + > + /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ > + states = <1800000 0 > + 3300000 1>; > + }; > + > + vddio_boot: regulator-vddio_boot { > + compatible = "regulator-fixed"; > + regulator-name = "VDDIO_BOOT"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vddao_3v3: regulator-vddao_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VDDAO_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + vcc_3v3: regulator-vcc_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VCC_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + emmc_pwrseq: emmc-pwrseq { > + compatible = "mmc-pwrseq-emmc"; > + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; > + }; > + > + wifi32k: wifi32k { > + compatible = "pwm-clock"; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; > + clocks = <&wifi32k>; > + clock-names = "ext_clock"; > + }; > + > + cvbs-connector { > + compatible = "composite-video-connector"; > + > + port { > + cvbs_connector_in: endpoint { > + remote-endpoint = <&cvbs_vdac_out>; > + }; > + }; > + }; > +}; > + > +&uart_AO { > + status = "okay"; > + pinctrl-0 = <&uart_ao_a_pins>; > + pinctrl-names = "default"; > +}; > + > +ðmac { > + status = "okay"; > + phy-mode = "rmii"; > + phy-handle = <&internal_phy>; > +}; > + > +&ir { > + status = "okay"; > + pinctrl-0 = <&remote_input_ao_pins>; > + pinctrl-names = "default"; > +}; > + > +/* SD card */ > +&sd_emmc_b { > + status = "okay"; > + pinctrl-0 = <&sdcard_pins>; > + pinctrl-names = "default"; > + > + bus-width = <4>; > + cap-sd-highspeed; > + max-frequency = <100000000>; > + disable-wp; > + > + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; > + cd-inverted; > + > + vmmc-supply = <&vddao_3v3>; > + vqmmc-supply = <&vddio_card>; > +}; > + > +/* eMMC */ > +&sd_emmc_c { > + status = "okay"; > + pinctrl-0 = <&emmc_pins>; > + pinctrl-names = "default"; > + > + bus-width = <8>; > + cap-sd-highspeed; > + cap-mmc-highspeed; > + max-frequency = <100000000>; > + non-removable; > + disable-wp; > + mmc-ddr-1_8v; > + mmc-hs200-1_8v; > + > + mmc-pwrseq = <&emmc_pwrseq>; > + vmmc-supply = <&vcc_3v3>; > + vqmmc-supply = <&vddio_boot>; > +}; > + > +&pwm_ef { > + status = "okay"; > + pinctrl-0 = <&pwm_e_pins>; > + pinctrl-names = "default"; > + clocks = <&clkc CLKID_FCLK_DIV4>; > + clock-names = "clkin0"; > +}; > + > +&cvbs_vdac_port { > + cvbs_vdac_out: endpoint { > + remote-endpoint = <&cvbs_connector_in>; > + }; > +}; ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV @ 2017-03-03 19:00 ` Kevin Hilman 0 siblings, 0 replies; 36+ messages in thread From: Kevin Hilman @ 2017-03-03 19:00 UTC (permalink / raw) To: Carlo Caione Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, narmstrong-rdvid1DuHRBWk0Htik3J/w, afaerber-l3A5Bk7waGM, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-6IF/jdPJHihWk0Htik3J/w, Carlo Caione Carlo Caione <carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org> writes: > From: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org> > > This patch adds support for the HwaCom AmazeTV set-top-box. The > hardware configuration is really similar to the other GXL boards but > for this hardware we need to limit the max-frequency of the eMMC to > have it working. > > Signed-off-by: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org> > --- > Documentation/devicetree/bindings/arm/amlogic.txt | 1 + > arch/arm64/boot/dts/amlogic/Makefile | 1 + > .../boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts | 164 +++++++++++++++++++++ nit: this should be meson-gxl-s905x-* Looks like you followed the pattern of the GXL nexbox, but that's now fixed in linux-next too. Kevin > 3 files changed, 166 insertions(+) > create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts > > diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt > index 9b2b41a..c369a55 100644 > --- a/Documentation/devicetree/bindings/arm/amlogic.txt > +++ b/Documentation/devicetree/bindings/arm/amlogic.txt > @@ -47,3 +47,4 @@ Board compatible values: > - "amlogic,q201" (Meson gxm s912) > - "nexbox,a95x" (Meson gxbb or Meson gxl s905x) > - "nexbox,a1" (Meson gxm s912) > + - "hwacom,amazetv" (Meson gxl s905x) > diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile > index 0d7bfbf..2932755 100644 > --- a/arch/arm64/boot/dts/amlogic/Makefile > +++ b/arch/arm64/boot/dts/amlogic/Makefile > @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-nexbox-a95x.dtb > +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-hwacom-amazetv.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q200.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q201.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts > new file mode 100644 > index 0000000..9a2c60d > --- /dev/null > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts > @@ -0,0 +1,164 @@ > +/* > + * Copyright (c) 2017 Carlo Caione > + * Copyright (c) 2016 BayLibre, Inc. > + * Author: Neil Armstrong <narmstrong-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> > + * > + * SPDX-License-Identifier: GPL-2.0+ OR MIT > + */ > + > +/dts-v1/; > + > +#include "meson-gxl-s905x.dtsi" > + > +/ { > + compatible = "hwacom,amazetv", "amlogic,s905x", "amlogic,meson-gxl"; > + model = "Hwacom AmazeTV (S905X)"; > + > + aliases { > + serial0 = &uart_AO; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + memory@0 { > + device_type = "memory"; > + reg = <0x0 0x0 0x0 0x80000000>; > + }; > + > + vddio_card: gpio-regulator { > + compatible = "regulator-gpio"; > + > + regulator-name = "VDDIO_CARD"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + > + gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; > + gpios-states = <1>; > + > + /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ > + states = <1800000 0 > + 3300000 1>; > + }; > + > + vddio_boot: regulator-vddio_boot { > + compatible = "regulator-fixed"; > + regulator-name = "VDDIO_BOOT"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vddao_3v3: regulator-vddao_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VDDAO_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + vcc_3v3: regulator-vcc_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VCC_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + emmc_pwrseq: emmc-pwrseq { > + compatible = "mmc-pwrseq-emmc"; > + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; > + }; > + > + wifi32k: wifi32k { > + compatible = "pwm-clock"; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; > + clocks = <&wifi32k>; > + clock-names = "ext_clock"; > + }; > + > + cvbs-connector { > + compatible = "composite-video-connector"; > + > + port { > + cvbs_connector_in: endpoint { > + remote-endpoint = <&cvbs_vdac_out>; > + }; > + }; > + }; > +}; > + > +&uart_AO { > + status = "okay"; > + pinctrl-0 = <&uart_ao_a_pins>; > + pinctrl-names = "default"; > +}; > + > +ðmac { > + status = "okay"; > + phy-mode = "rmii"; > + phy-handle = <&internal_phy>; > +}; > + > +&ir { > + status = "okay"; > + pinctrl-0 = <&remote_input_ao_pins>; > + pinctrl-names = "default"; > +}; > + > +/* SD card */ > +&sd_emmc_b { > + status = "okay"; > + pinctrl-0 = <&sdcard_pins>; > + pinctrl-names = "default"; > + > + bus-width = <4>; > + cap-sd-highspeed; > + max-frequency = <100000000>; > + disable-wp; > + > + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; > + cd-inverted; > + > + vmmc-supply = <&vddao_3v3>; > + vqmmc-supply = <&vddio_card>; > +}; > + > +/* eMMC */ > +&sd_emmc_c { > + status = "okay"; > + pinctrl-0 = <&emmc_pins>; > + pinctrl-names = "default"; > + > + bus-width = <8>; > + cap-sd-highspeed; > + cap-mmc-highspeed; > + max-frequency = <100000000>; > + non-removable; > + disable-wp; > + mmc-ddr-1_8v; > + mmc-hs200-1_8v; > + > + mmc-pwrseq = <&emmc_pwrseq>; > + vmmc-supply = <&vcc_3v3>; > + vqmmc-supply = <&vddio_boot>; > +}; > + > +&pwm_ef { > + status = "okay"; > + pinctrl-0 = <&pwm_e_pins>; > + pinctrl-names = "default"; > + clocks = <&clkc CLKID_FCLK_DIV4>; > + clock-names = "clkin0"; > +}; > + > +&cvbs_vdac_port { > + cvbs_vdac_out: endpoint { > + remote-endpoint = <&cvbs_connector_in>; > + }; > +}; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV @ 2017-03-03 19:00 ` Kevin Hilman 0 siblings, 0 replies; 36+ messages in thread From: Kevin Hilman @ 2017-03-03 19:00 UTC (permalink / raw) To: linux-arm-kernel Carlo Caione <carlo@caione.org> writes: > From: Carlo Caione <carlo@endlessm.com> > > This patch adds support for the HwaCom AmazeTV set-top-box. The > hardware configuration is really similar to the other GXL boards but > for this hardware we need to limit the max-frequency of the eMMC to > have it working. > > Signed-off-by: Carlo Caione <carlo@endlessm.com> > --- > Documentation/devicetree/bindings/arm/amlogic.txt | 1 + > arch/arm64/boot/dts/amlogic/Makefile | 1 + > .../boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts | 164 +++++++++++++++++++++ nit: this should be meson-gxl-s905x-* Looks like you followed the pattern of the GXL nexbox, but that's now fixed in linux-next too. Kevin > 3 files changed, 166 insertions(+) > create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts > > diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt > index 9b2b41a..c369a55 100644 > --- a/Documentation/devicetree/bindings/arm/amlogic.txt > +++ b/Documentation/devicetree/bindings/arm/amlogic.txt > @@ -47,3 +47,4 @@ Board compatible values: > - "amlogic,q201" (Meson gxm s912) > - "nexbox,a95x" (Meson gxbb or Meson gxl s905x) > - "nexbox,a1" (Meson gxm s912) > + - "hwacom,amazetv" (Meson gxl s905x) > diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile > index 0d7bfbf..2932755 100644 > --- a/arch/arm64/boot/dts/amlogic/Makefile > +++ b/arch/arm64/boot/dts/amlogic/Makefile > @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-nexbox-a95x.dtb > +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-hwacom-amazetv.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q200.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q201.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts > new file mode 100644 > index 0000000..9a2c60d > --- /dev/null > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts > @@ -0,0 +1,164 @@ > +/* > + * Copyright (c) 2017 Carlo Caione > + * Copyright (c) 2016 BayLibre, Inc. > + * Author: Neil Armstrong <narmstrong@kernel.org> > + * > + * SPDX-License-Identifier: GPL-2.0+ OR MIT > + */ > + > +/dts-v1/; > + > +#include "meson-gxl-s905x.dtsi" > + > +/ { > + compatible = "hwacom,amazetv", "amlogic,s905x", "amlogic,meson-gxl"; > + model = "Hwacom AmazeTV (S905X)"; > + > + aliases { > + serial0 = &uart_AO; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + memory at 0 { > + device_type = "memory"; > + reg = <0x0 0x0 0x0 0x80000000>; > + }; > + > + vddio_card: gpio-regulator { > + compatible = "regulator-gpio"; > + > + regulator-name = "VDDIO_CARD"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + > + gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; > + gpios-states = <1>; > + > + /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ > + states = <1800000 0 > + 3300000 1>; > + }; > + > + vddio_boot: regulator-vddio_boot { > + compatible = "regulator-fixed"; > + regulator-name = "VDDIO_BOOT"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vddao_3v3: regulator-vddao_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VDDAO_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + vcc_3v3: regulator-vcc_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VCC_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + emmc_pwrseq: emmc-pwrseq { > + compatible = "mmc-pwrseq-emmc"; > + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; > + }; > + > + wifi32k: wifi32k { > + compatible = "pwm-clock"; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; > + clocks = <&wifi32k>; > + clock-names = "ext_clock"; > + }; > + > + cvbs-connector { > + compatible = "composite-video-connector"; > + > + port { > + cvbs_connector_in: endpoint { > + remote-endpoint = <&cvbs_vdac_out>; > + }; > + }; > + }; > +}; > + > +&uart_AO { > + status = "okay"; > + pinctrl-0 = <&uart_ao_a_pins>; > + pinctrl-names = "default"; > +}; > + > +ðmac { > + status = "okay"; > + phy-mode = "rmii"; > + phy-handle = <&internal_phy>; > +}; > + > +&ir { > + status = "okay"; > + pinctrl-0 = <&remote_input_ao_pins>; > + pinctrl-names = "default"; > +}; > + > +/* SD card */ > +&sd_emmc_b { > + status = "okay"; > + pinctrl-0 = <&sdcard_pins>; > + pinctrl-names = "default"; > + > + bus-width = <4>; > + cap-sd-highspeed; > + max-frequency = <100000000>; > + disable-wp; > + > + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; > + cd-inverted; > + > + vmmc-supply = <&vddao_3v3>; > + vqmmc-supply = <&vddio_card>; > +}; > + > +/* eMMC */ > +&sd_emmc_c { > + status = "okay"; > + pinctrl-0 = <&emmc_pins>; > + pinctrl-names = "default"; > + > + bus-width = <8>; > + cap-sd-highspeed; > + cap-mmc-highspeed; > + max-frequency = <100000000>; > + non-removable; > + disable-wp; > + mmc-ddr-1_8v; > + mmc-hs200-1_8v; > + > + mmc-pwrseq = <&emmc_pwrseq>; > + vmmc-supply = <&vcc_3v3>; > + vqmmc-supply = <&vddio_boot>; > +}; > + > +&pwm_ef { > + status = "okay"; > + pinctrl-0 = <&pwm_e_pins>; > + pinctrl-names = "default"; > + clocks = <&clkc CLKID_FCLK_DIV4>; > + clock-names = "clkin0"; > +}; > + > +&cvbs_vdac_port { > + cvbs_vdac_out: endpoint { > + remote-endpoint = <&cvbs_connector_in>; > + }; > +}; ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 0/2] Add support for HwaCom AmazeTV @ 2017-02-12 19:32 Carlo Caione 2017-02-12 19:32 ` Carlo Caione 0 siblings, 1 reply; 36+ messages in thread From: Carlo Caione @ 2017-02-12 19:32 UTC (permalink / raw) To: linus-amlogic From: Carlo Caione <carlo@endlessm.com> Add support for HwaCom AmazeTV, one more S905X board. Carlo Caione (2): devicetree: Add vendor prefix for Hwacom Systems Inc. ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV Documentation/devicetree/bindings/arm/amlogic.txt | 1 + .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts | 201 +++++++++++++++++++++ 4 files changed, 204 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-hwacom-amazetv.dts -- 2.9.3 ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. 2017-02-12 19:32 [PATCH 0/2] " Carlo Caione 2017-02-12 19:32 ` Carlo Caione @ 2017-02-12 19:32 ` Carlo Caione 0 siblings, 0 replies; 36+ messages in thread From: Carlo Caione @ 2017-02-12 19:32 UTC (permalink / raw) To: linus-amlogic From: Carlo Caione <carlo@endlessm.com> Hwacom Systems Inc. is a broadband system integrator and supplier of mobile, fixed and IP networks related services as well as multimedia application. Website: http://www.hwacom.com/ Signed-off-by: Carlo Caione <carlo@endlessm.com> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 16d3b5e..a1704a6 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -131,6 +131,7 @@ holt Holt Integrated Circuits, Inc. honeywell Honeywell hp Hewlett Packard holtek Holtek Semiconductor, Inc. +hwacom HwaCom Systems Inc. i2se I2SE GmbH ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. -- 2.9.3 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. @ 2017-02-12 19:32 ` Carlo Caione 0 siblings, 0 replies; 36+ messages in thread From: Carlo Caione @ 2017-02-12 19:32 UTC (permalink / raw) To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, khilman-rdvid1DuHRBWk0Htik3J/w, narmstrong-rdvid1DuHRBWk0Htik3J/w, afaerber-l3A5Bk7waGM, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-6IF/jdPJHihWk0Htik3J/w Cc: Carlo Caione From: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org> Hwacom Systems Inc. is a broadband system integrator and supplier of mobile, fixed and IP networks related services as well as multimedia application. Website: http://www.hwacom.com/ Signed-off-by: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 16d3b5e..a1704a6 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -131,6 +131,7 @@ holt Holt Integrated Circuits, Inc. honeywell Honeywell hp Hewlett Packard holtek Holtek Semiconductor, Inc. +hwacom HwaCom Systems Inc. i2se I2SE GmbH ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. @ 2017-02-12 19:32 ` Carlo Caione 0 siblings, 0 replies; 36+ messages in thread From: Carlo Caione @ 2017-02-12 19:32 UTC (permalink / raw) To: linux-arm-kernel From: Carlo Caione <carlo@endlessm.com> Hwacom Systems Inc. is a broadband system integrator and supplier of mobile, fixed and IP networks related services as well as multimedia application. Website: http://www.hwacom.com/ Signed-off-by: Carlo Caione <carlo@endlessm.com> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 16d3b5e..a1704a6 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -131,6 +131,7 @@ holt Holt Integrated Circuits, Inc. honeywell Honeywell hp Hewlett Packard holtek Holtek Semiconductor, Inc. +hwacom HwaCom Systems Inc. i2se I2SE GmbH ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. -- 2.9.3 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. 2017-02-12 19:32 ` Carlo Caione (?) @ 2017-02-22 14:25 ` Rob Herring -1 siblings, 0 replies; 36+ messages in thread From: Rob Herring @ 2017-02-22 14:25 UTC (permalink / raw) To: linus-amlogic On Sun, Feb 12, 2017 at 08:32:46PM +0100, Carlo Caione wrote: > From: Carlo Caione <carlo@endlessm.com> > > Hwacom Systems Inc. is a broadband system integrator and supplier of > mobile, fixed and IP networks related services as well as > multimedia application. Website: http://www.hwacom.com/ > > Signed-off-by: Carlo Caione <carlo@endlessm.com> > --- > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + > 1 file changed, 1 insertion(+) Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. @ 2017-02-22 14:25 ` Rob Herring 0 siblings, 0 replies; 36+ messages in thread From: Rob Herring @ 2017-02-22 14:25 UTC (permalink / raw) To: Carlo Caione Cc: khilman-rdvid1DuHRBWk0Htik3J/w, narmstrong-rdvid1DuHRBWk0Htik3J/w, afaerber-l3A5Bk7waGM, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-6IF/jdPJHihWk0Htik3J/w, Carlo Caione On Sun, Feb 12, 2017 at 08:32:46PM +0100, Carlo Caione wrote: > From: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org> > > Hwacom Systems Inc. is a broadband system integrator and supplier of > mobile, fixed and IP networks related services as well as > multimedia application. Website: http://www.hwacom.com/ > > Signed-off-by: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org> > --- > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + > 1 file changed, 1 insertion(+) Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. @ 2017-02-22 14:25 ` Rob Herring 0 siblings, 0 replies; 36+ messages in thread From: Rob Herring @ 2017-02-22 14:25 UTC (permalink / raw) To: linux-arm-kernel On Sun, Feb 12, 2017 at 08:32:46PM +0100, Carlo Caione wrote: > From: Carlo Caione <carlo@endlessm.com> > > Hwacom Systems Inc. is a broadband system integrator and supplier of > mobile, fixed and IP networks related services as well as > multimedia application. Website: http://www.hwacom.com/ > > Signed-off-by: Carlo Caione <carlo@endlessm.com> > --- > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + > 1 file changed, 1 insertion(+) Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. 2017-02-22 14:25 ` Rob Herring (?) @ 2017-02-26 21:45 ` Kevin Hilman -1 siblings, 0 replies; 36+ messages in thread From: Kevin Hilman @ 2017-02-26 21:45 UTC (permalink / raw) To: linus-amlogic Rob Herring <robh@kernel.org> writes: > On Sun, Feb 12, 2017 at 08:32:46PM +0100, Carlo Caione wrote: >> From: Carlo Caione <carlo@endlessm.com> >> >> Hwacom Systems Inc. is a broadband system integrator and supplier of >> mobile, fixed and IP networks related services as well as >> multimedia application. Website: http://www.hwacom.com/ >> >> Signed-off-by: Carlo Caione <carlo@endlessm.com> >> --- >> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + >> 1 file changed, 1 insertion(+) > > Acked-by: Rob Herring <robh@kernel.org> Rob, I assume I should take this patch along with the patch that's using this prefix? Or does this go through some other DT path? Kevin ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. @ 2017-02-26 21:45 ` Kevin Hilman 0 siblings, 0 replies; 36+ messages in thread From: Kevin Hilman @ 2017-02-26 21:45 UTC (permalink / raw) To: Rob Herring Cc: Carlo Caione, narmstrong-rdvid1DuHRBWk0Htik3J/w, afaerber-l3A5Bk7waGM, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-6IF/jdPJHihWk0Htik3J/w, Carlo Caione Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> writes: > On Sun, Feb 12, 2017 at 08:32:46PM +0100, Carlo Caione wrote: >> From: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org> >> >> Hwacom Systems Inc. is a broadband system integrator and supplier of >> mobile, fixed and IP networks related services as well as >> multimedia application. Website: http://www.hwacom.com/ >> >> Signed-off-by: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org> >> --- >> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + >> 1 file changed, 1 insertion(+) > > Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> Rob, I assume I should take this patch along with the patch that's using this prefix? Or does this go through some other DT path? Kevin -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. @ 2017-02-26 21:45 ` Kevin Hilman 0 siblings, 0 replies; 36+ messages in thread From: Kevin Hilman @ 2017-02-26 21:45 UTC (permalink / raw) To: linux-arm-kernel Rob Herring <robh@kernel.org> writes: > On Sun, Feb 12, 2017 at 08:32:46PM +0100, Carlo Caione wrote: >> From: Carlo Caione <carlo@endlessm.com> >> >> Hwacom Systems Inc. is a broadband system integrator and supplier of >> mobile, fixed and IP networks related services as well as >> multimedia application. Website: http://www.hwacom.com/ >> >> Signed-off-by: Carlo Caione <carlo@endlessm.com> >> --- >> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + >> 1 file changed, 1 insertion(+) > > Acked-by: Rob Herring <robh@kernel.org> Rob, I assume I should take this patch along with the patch that's using this prefix? Or does this go through some other DT path? Kevin ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. 2017-02-26 21:45 ` Kevin Hilman (?) @ 2017-02-27 13:29 ` Rob Herring -1 siblings, 0 replies; 36+ messages in thread From: Rob Herring @ 2017-02-27 13:29 UTC (permalink / raw) To: linus-amlogic On Sun, Feb 26, 2017 at 3:45 PM, Kevin Hilman <khilman@baylibre.com> wrote: > Rob Herring <robh@kernel.org> writes: > >> On Sun, Feb 12, 2017 at 08:32:46PM +0100, Carlo Caione wrote: >>> From: Carlo Caione <carlo@endlessm.com> >>> >>> Hwacom Systems Inc. is a broadband system integrator and supplier of >>> mobile, fixed and IP networks related services as well as >>> multimedia application. Website: http://www.hwacom.com/ >>> >>> Signed-off-by: Carlo Caione <carlo@endlessm.com> >>> --- >>> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + >>> 1 file changed, 1 insertion(+) >> >> Acked-by: Rob Herring <robh@kernel.org> > > Rob, I assume I should take this patch along with the patch that's using > this prefix? Or does this go through some other DT path? Yes, it should be applied with the rest of the series. Rob ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. @ 2017-02-27 13:29 ` Rob Herring 0 siblings, 0 replies; 36+ messages in thread From: Rob Herring @ 2017-02-27 13:29 UTC (permalink / raw) To: Kevin Hilman Cc: devicetree@vger.kernel.org, Neil Armstrong, Carlo Caione, Carlo Caione, linux-amlogic, linux, Andreas Färber, linux-arm-kernel@lists.infradead.org On Sun, Feb 26, 2017 at 3:45 PM, Kevin Hilman <khilman@baylibre.com> wrote: > Rob Herring <robh@kernel.org> writes: > >> On Sun, Feb 12, 2017 at 08:32:46PM +0100, Carlo Caione wrote: >>> From: Carlo Caione <carlo@endlessm.com> >>> >>> Hwacom Systems Inc. is a broadband system integrator and supplier of >>> mobile, fixed and IP networks related services as well as >>> multimedia application. Website: http://www.hwacom.com/ >>> >>> Signed-off-by: Carlo Caione <carlo@endlessm.com> >>> --- >>> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + >>> 1 file changed, 1 insertion(+) >> >> Acked-by: Rob Herring <robh@kernel.org> > > Rob, I assume I should take this patch along with the patch that's using > this prefix? Or does this go through some other DT path? Yes, it should be applied with the rest of the series. Rob ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. @ 2017-02-27 13:29 ` Rob Herring 0 siblings, 0 replies; 36+ messages in thread From: Rob Herring @ 2017-02-27 13:29 UTC (permalink / raw) To: linux-arm-kernel On Sun, Feb 26, 2017 at 3:45 PM, Kevin Hilman <khilman@baylibre.com> wrote: > Rob Herring <robh@kernel.org> writes: > >> On Sun, Feb 12, 2017 at 08:32:46PM +0100, Carlo Caione wrote: >>> From: Carlo Caione <carlo@endlessm.com> >>> >>> Hwacom Systems Inc. is a broadband system integrator and supplier of >>> mobile, fixed and IP networks related services as well as >>> multimedia application. Website: http://www.hwacom.com/ >>> >>> Signed-off-by: Carlo Caione <carlo@endlessm.com> >>> --- >>> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + >>> 1 file changed, 1 insertion(+) >> >> Acked-by: Rob Herring <robh@kernel.org> > > Rob, I assume I should take this patch along with the patch that's using > this prefix? Or does this go through some other DT path? Yes, it should be applied with the rest of the series. Rob ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. 2017-02-27 13:29 ` Rob Herring (?) @ 2017-02-27 19:02 ` Andreas Färber -1 siblings, 0 replies; 36+ messages in thread From: Andreas Färber @ 2017-02-27 19:02 UTC (permalink / raw) To: linus-amlogic Am 27.02.2017 um 14:29 schrieb Rob Herring: > On Sun, Feb 26, 2017 at 3:45 PM, Kevin Hilman <khilman@baylibre.com> wrote: >> Rob Herring <robh@kernel.org> writes: >> >>> On Sun, Feb 12, 2017 at 08:32:46PM +0100, Carlo Caione wrote: >>>> From: Carlo Caione <carlo@endlessm.com> >>>> >>>> Hwacom Systems Inc. is a broadband system integrator and supplier of >>>> mobile, fixed and IP networks related services as well as >>>> multimedia application. Website: http://www.hwacom.com/ >>>> >>>> Signed-off-by: Carlo Caione <carlo@endlessm.com> >>>> --- >>>> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + >>>> 1 file changed, 1 insertion(+) >>> >>> Acked-by: Rob Herring <robh@kernel.org> >> >> Rob, I assume I should take this patch along with the patch that's using >> this prefix? Or does this go through some other DT path? > > Yes, it should be applied with the rest of the series. Elsewhere Rob requested that "dt-bindings: " be used in $subject BTW. Does that not apply to vendor prefixes, or should Kevin fix that when applying? Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany GF: Felix Imend?rffer, Jane Smithard, Graham Norton HRB 21284 (AG N?rnberg) ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. @ 2017-02-27 19:02 ` Andreas Färber 0 siblings, 0 replies; 36+ messages in thread From: Andreas Färber @ 2017-02-27 19:02 UTC (permalink / raw) To: Rob Herring, Kevin Hilman Cc: devicetree@vger.kernel.org, Neil Armstrong, Carlo Caione, Carlo Caione, linux-amlogic, linux, linux-arm-kernel@lists.infradead.org Am 27.02.2017 um 14:29 schrieb Rob Herring: > On Sun, Feb 26, 2017 at 3:45 PM, Kevin Hilman <khilman@baylibre.com> wrote: >> Rob Herring <robh@kernel.org> writes: >> >>> On Sun, Feb 12, 2017 at 08:32:46PM +0100, Carlo Caione wrote: >>>> From: Carlo Caione <carlo@endlessm.com> >>>> >>>> Hwacom Systems Inc. is a broadband system integrator and supplier of >>>> mobile, fixed and IP networks related services as well as >>>> multimedia application. Website: http://www.hwacom.com/ >>>> >>>> Signed-off-by: Carlo Caione <carlo@endlessm.com> >>>> --- >>>> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + >>>> 1 file changed, 1 insertion(+) >>> >>> Acked-by: Rob Herring <robh@kernel.org> >> >> Rob, I assume I should take this patch along with the patch that's using >> this prefix? Or does this go through some other DT path? > > Yes, it should be applied with the rest of the series. Elsewhere Rob requested that "dt-bindings: " be used in $subject BTW. Does that not apply to vendor prefixes, or should Kevin fix that when applying? Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. @ 2017-02-27 19:02 ` Andreas Färber 0 siblings, 0 replies; 36+ messages in thread From: Andreas Färber @ 2017-02-27 19:02 UTC (permalink / raw) To: linux-arm-kernel Am 27.02.2017 um 14:29 schrieb Rob Herring: > On Sun, Feb 26, 2017 at 3:45 PM, Kevin Hilman <khilman@baylibre.com> wrote: >> Rob Herring <robh@kernel.org> writes: >> >>> On Sun, Feb 12, 2017 at 08:32:46PM +0100, Carlo Caione wrote: >>>> From: Carlo Caione <carlo@endlessm.com> >>>> >>>> Hwacom Systems Inc. is a broadband system integrator and supplier of >>>> mobile, fixed and IP networks related services as well as >>>> multimedia application. Website: http://www.hwacom.com/ >>>> >>>> Signed-off-by: Carlo Caione <carlo@endlessm.com> >>>> --- >>>> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + >>>> 1 file changed, 1 insertion(+) >>> >>> Acked-by: Rob Herring <robh@kernel.org> >> >> Rob, I assume I should take this patch along with the patch that's using >> this prefix? Or does this go through some other DT path? > > Yes, it should be applied with the rest of the series. Elsewhere Rob requested that "dt-bindings: " be used in $subject BTW. Does that not apply to vendor prefixes, or should Kevin fix that when applying? Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany GF: Felix Imend?rffer, Jane Smithard, Graham Norton HRB 21284 (AG N?rnberg) ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. 2017-02-27 19:02 ` Andreas Färber (?) @ 2017-02-27 22:18 ` Rob Herring -1 siblings, 0 replies; 36+ messages in thread From: Rob Herring @ 2017-02-27 22:18 UTC (permalink / raw) To: linus-amlogic On Mon, Feb 27, 2017 at 1:02 PM, Andreas F?rber <afaerber@suse.de> wrote: > Am 27.02.2017 um 14:29 schrieb Rob Herring: >> On Sun, Feb 26, 2017 at 3:45 PM, Kevin Hilman <khilman@baylibre.com> wrote: >>> Rob Herring <robh@kernel.org> writes: >>> >>>> On Sun, Feb 12, 2017 at 08:32:46PM +0100, Carlo Caione wrote: >>>>> From: Carlo Caione <carlo@endlessm.com> >>>>> >>>>> Hwacom Systems Inc. is a broadband system integrator and supplier of >>>>> mobile, fixed and IP networks related services as well as >>>>> multimedia application. Website: http://www.hwacom.com/ >>>>> >>>>> Signed-off-by: Carlo Caione <carlo@endlessm.com> >>>>> --- >>>>> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + >>>>> 1 file changed, 1 insertion(+) >>>> >>>> Acked-by: Rob Herring <robh@kernel.org> >>> >>> Rob, I assume I should take this patch along with the patch that's using >>> this prefix? Or does this go through some other DT path? >> >> Yes, it should be applied with the rest of the series. > > Elsewhere Rob requested that "dt-bindings: " be used in $subject BTW. > Does that not apply to vendor prefixes, or should Kevin fix that when > applying? Yes, it does apply, but it's fine leaving as-is. Rob ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. @ 2017-02-27 22:18 ` Rob Herring 0 siblings, 0 replies; 36+ messages in thread From: Rob Herring @ 2017-02-27 22:18 UTC (permalink / raw) To: Andreas Färber Cc: devicetree@vger.kernel.org, Neil Armstrong, Kevin Hilman, Carlo Caione, Carlo Caione, linux-amlogic, linux, linux-arm-kernel@lists.infradead.org On Mon, Feb 27, 2017 at 1:02 PM, Andreas Färber <afaerber@suse.de> wrote: > Am 27.02.2017 um 14:29 schrieb Rob Herring: >> On Sun, Feb 26, 2017 at 3:45 PM, Kevin Hilman <khilman@baylibre.com> wrote: >>> Rob Herring <robh@kernel.org> writes: >>> >>>> On Sun, Feb 12, 2017 at 08:32:46PM +0100, Carlo Caione wrote: >>>>> From: Carlo Caione <carlo@endlessm.com> >>>>> >>>>> Hwacom Systems Inc. is a broadband system integrator and supplier of >>>>> mobile, fixed and IP networks related services as well as >>>>> multimedia application. Website: http://www.hwacom.com/ >>>>> >>>>> Signed-off-by: Carlo Caione <carlo@endlessm.com> >>>>> --- >>>>> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + >>>>> 1 file changed, 1 insertion(+) >>>> >>>> Acked-by: Rob Herring <robh@kernel.org> >>> >>> Rob, I assume I should take this patch along with the patch that's using >>> this prefix? Or does this go through some other DT path? >> >> Yes, it should be applied with the rest of the series. > > Elsewhere Rob requested that "dt-bindings: " be used in $subject BTW. > Does that not apply to vendor prefixes, or should Kevin fix that when > applying? Yes, it does apply, but it's fine leaving as-is. Rob _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc. @ 2017-02-27 22:18 ` Rob Herring 0 siblings, 0 replies; 36+ messages in thread From: Rob Herring @ 2017-02-27 22:18 UTC (permalink / raw) To: linux-arm-kernel On Mon, Feb 27, 2017 at 1:02 PM, Andreas F?rber <afaerber@suse.de> wrote: > Am 27.02.2017 um 14:29 schrieb Rob Herring: >> On Sun, Feb 26, 2017 at 3:45 PM, Kevin Hilman <khilman@baylibre.com> wrote: >>> Rob Herring <robh@kernel.org> writes: >>> >>>> On Sun, Feb 12, 2017 at 08:32:46PM +0100, Carlo Caione wrote: >>>>> From: Carlo Caione <carlo@endlessm.com> >>>>> >>>>> Hwacom Systems Inc. is a broadband system integrator and supplier of >>>>> mobile, fixed and IP networks related services as well as >>>>> multimedia application. Website: http://www.hwacom.com/ >>>>> >>>>> Signed-off-by: Carlo Caione <carlo@endlessm.com> >>>>> --- >>>>> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + >>>>> 1 file changed, 1 insertion(+) >>>> >>>> Acked-by: Rob Herring <robh@kernel.org> >>> >>> Rob, I assume I should take this patch along with the patch that's using >>> this prefix? Or does this go through some other DT path? >> >> Yes, it should be applied with the rest of the series. > > Elsewhere Rob requested that "dt-bindings: " be used in $subject BTW. > Does that not apply to vendor prefixes, or should Kevin fix that when > applying? Yes, it does apply, but it's fine leaving as-is. Rob ^ permalink raw reply [flat|nested] 36+ messages in thread
end of thread, other threads:[~2017-03-03 19:00 UTC | newest] Thread overview: 36+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2017-02-22 16:31 [PATCH 0/2] Add support for HwaCom AmazeTV Carlo Caione 2017-02-22 16:31 ` Carlo Caione 2017-02-22 16:31 ` Carlo Caione 2017-02-22 16:31 ` [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc Carlo Caione 2017-02-22 16:31 ` Carlo Caione 2017-02-22 16:31 ` Carlo Caione 2017-03-03 18:57 ` Kevin Hilman 2017-03-03 18:57 ` Kevin Hilman 2017-03-03 18:57 ` Kevin Hilman 2017-02-22 16:31 ` [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV Carlo Caione 2017-02-22 16:31 ` Carlo Caione 2017-02-22 16:31 ` Carlo Caione 2017-02-27 22:58 ` Rob Herring 2017-02-27 22:58 ` Rob Herring 2017-02-27 22:58 ` Rob Herring 2017-03-03 19:00 ` Kevin Hilman 2017-03-03 19:00 ` Kevin Hilman 2017-03-03 19:00 ` Kevin Hilman -- strict thread matches above, loose matches on Subject: below -- 2017-02-12 19:32 [PATCH 0/2] " Carlo Caione 2017-02-12 19:32 ` [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc Carlo Caione 2017-02-12 19:32 ` Carlo Caione 2017-02-12 19:32 ` Carlo Caione 2017-02-22 14:25 ` Rob Herring 2017-02-22 14:25 ` Rob Herring 2017-02-22 14:25 ` Rob Herring 2017-02-26 21:45 ` Kevin Hilman 2017-02-26 21:45 ` Kevin Hilman 2017-02-26 21:45 ` Kevin Hilman 2017-02-27 13:29 ` Rob Herring 2017-02-27 13:29 ` Rob Herring 2017-02-27 13:29 ` Rob Herring 2017-02-27 19:02 ` Andreas Färber 2017-02-27 19:02 ` Andreas Färber 2017-02-27 19:02 ` Andreas Färber 2017-02-27 22:18 ` Rob Herring 2017-02-27 22:18 ` Rob Herring 2017-02-27 22:18 ` Rob Herring
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.