* [PATCH v2 0/2] pinctrl: meson-gxbb: Export pins for PWMs @ 2016-08-23 11:25 ` Neil Armstrong 0 siblings, 0 replies; 16+ messages in thread From: Neil Armstrong @ 2016-08-23 11:25 UTC (permalink / raw) To: linus-amlogic Add PWM pins in the meson-gxbb pinctrl driver and export then in the GXBB dtsi. Changes since v1 at http://lkml.kernel.org/r/1471870450-11109-1-git-send-email-narmstrong at baylibre.com : - Rebased on git.linaro.org/people/linus.walleij/linux-pinctrl.git branch devel - Fixed previous rebase send on resend Neil Armstrong (2): pinctrl: meson-gxbb: add pins for PWM ARM64: dts: meson-gxbb: Add PWM pinctrl nodes arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 77 ++++++++++++++++++++++++++++ drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 79 +++++++++++++++++++++++++++++ 2 files changed, 156 insertions(+) -- 1.9.1 ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 0/2] pinctrl: meson-gxbb: Export pins for PWMs @ 2016-08-23 11:25 ` Neil Armstrong 0 siblings, 0 replies; 16+ messages in thread From: Neil Armstrong @ 2016-08-23 11:25 UTC (permalink / raw) To: linux-arm-kernel Add PWM pins in the meson-gxbb pinctrl driver and export then in the GXBB dtsi. Changes since v1 at http://lkml.kernel.org/r/1471870450-11109-1-git-send-email-narmstrong at baylibre.com : - Rebased on git.linaro.org/people/linus.walleij/linux-pinctrl.git branch devel - Fixed previous rebase send on resend Neil Armstrong (2): pinctrl: meson-gxbb: add pins for PWM ARM64: dts: meson-gxbb: Add PWM pinctrl nodes arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 77 ++++++++++++++++++++++++++++ drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 79 +++++++++++++++++++++++++++++ 2 files changed, 156 insertions(+) -- 1.9.1 ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 0/2] pinctrl: meson-gxbb: Export pins for PWMs @ 2016-08-23 11:25 ` Neil Armstrong 0 siblings, 0 replies; 16+ messages in thread From: Neil Armstrong @ 2016-08-23 11:25 UTC (permalink / raw) To: linus.walleij, khilman, carlo Cc: Neil Armstrong, linux-arm-kernel, linux-amlogic, linux-kernel, linux-gpio Add PWM pins in the meson-gxbb pinctrl driver and export then in the GXBB dtsi. Changes since v1 at http://lkml.kernel.org/r/1471870450-11109-1-git-send-email-narmstrong@baylibre.com : - Rebased on git.linaro.org/people/linus.walleij/linux-pinctrl.git branch devel - Fixed previous rebase send on resend Neil Armstrong (2): pinctrl: meson-gxbb: add pins for PWM ARM64: dts: meson-gxbb: Add PWM pinctrl nodes arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 77 ++++++++++++++++++++++++++++ drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 79 +++++++++++++++++++++++++++++ 2 files changed, 156 insertions(+) -- 1.9.1 ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 1/2] pinctrl: meson-gxbb: add pins for PWM 2016-08-23 11:25 ` Neil Armstrong (?) @ 2016-08-23 11:25 ` Neil Armstrong -1 siblings, 0 replies; 16+ messages in thread From: Neil Armstrong @ 2016-08-23 11:25 UTC (permalink / raw) To: linus-amlogic Add support for PWM pins, for EE and AO domains. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 79 ++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+) diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c index 7eeb053..9ba9172 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c +++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c @@ -193,6 +193,14 @@ static const unsigned int eth_txd1_pins[] = { PIN(GPIOZ_11, EE_OFF) }; static const unsigned int eth_txd2_pins[] = { PIN(GPIOZ_12, EE_OFF) }; static const unsigned int eth_txd3_pins[] = { PIN(GPIOZ_13, EE_OFF) }; +static const unsigned int pwm_a_x_pins[] = { PIN(GPIOX_6, EE_OFF) }; +static const unsigned int pwm_a_y_pins[] = { PIN(GPIOY_16, EE_OFF) }; +static const unsigned int pwm_b_pins[] = { PIN(GPIODV_29, EE_OFF) }; +static const unsigned int pwm_d_pins[] = { PIN(GPIODV_28, EE_OFF) }; +static const unsigned int pwm_e_pins[] = { PIN(GPIOX_19, EE_OFF) }; +static const unsigned int pwm_f_x_pins[] = { PIN(GPIOX_7, EE_OFF) }; +static const unsigned int pwm_f_y_pins[] = { PIN(GPIOY_15, EE_OFF) }; + static const struct pinctrl_pin_desc meson_gxbb_aobus_pins[] = { MESON_PIN(GPIOAO_0, 0), MESON_PIN(GPIOAO_1, 0), @@ -227,6 +235,11 @@ static const unsigned int i2c_slave_sda_ao_pins[] = {PIN(GPIOAO_5, 0) }; static const unsigned int remote_input_ao_pins[] = {PIN(GPIOAO_7, 0) }; +static const unsigned int pwm_ao_a_3_pins[] = { PIN(GPIOAO_3, 0) }; +static const unsigned int pwm_ao_a_6_pins[] = { PIN(GPIOAO_6, 0) }; +static const unsigned int pwm_ao_a_12_pins[] = { PIN(GPIOAO_12, 0) }; +static const unsigned int pwm_ao_b_pins[] = { PIN(GPIOAO_13, 0) }; + static struct meson_pmx_group meson_gxbb_periphs_groups[] = { GPIO_GROUP(GPIOZ_0, EE_OFF), GPIO_GROUP(GPIOZ_1, EE_OFF), @@ -361,12 +374,17 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = { GROUP(uart_rx_a, 4, 12), GROUP(uart_cts_a, 4, 11), GROUP(uart_rts_a, 4, 10), + GROUP(pwm_a_x, 3, 17), + GROUP(pwm_e, 2, 30), + GROUP(pwm_f_x, 3, 18), /* Bank Y */ GROUP(uart_cts_c, 1, 19), GROUP(uart_rts_c, 1, 18), GROUP(uart_tx_c, 1, 17), GROUP(uart_rx_c, 1, 16), + GROUP(pwm_a_y, 1, 21), + GROUP(pwm_f_y, 1, 20), /* Bank Z */ GROUP(eth_mdio, 6, 1), @@ -389,6 +407,8 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = { GROUP(uart_rx_b, 2, 28), GROUP(uart_cts_b, 2, 27), GROUP(uart_rts_b, 2, 26), + GROUP(pwm_b, 3, 21), + GROUP(pwm_d, 3, 20), /* Bank BOOT */ GROUP(emmc_nand_d07, 4, 30), @@ -435,6 +455,10 @@ static struct meson_pmx_group meson_gxbb_aobus_groups[] = { GROUP(i2c_slave_sck_ao, 0, 2), GROUP(i2c_slave_sda_ao, 0, 1), GROUP(remote_input_ao, 0, 0), + GROUP(pwm_ao_a_3, 0, 22), + GROUP(pwm_ao_a_6, 0, 18), + GROUP(pwm_ao_a_12, 0, 17), + GROUP(pwm_ao_b, 0, 3), }; static const char * const gpio_periphs_groups[] = { @@ -502,6 +526,34 @@ static const char * const eth_groups[] = { "eth_txd0", "eth_txd1", "eth_txd2", "eth_txd3", }; +static const char * const pwm_a_x_groups[] = { + "pwm_a_x", +}; + +static const char * const pwm_a_y_groups[] = { + "pwm_a_y", +}; + +static const char * const pwm_b_groups[] = { + "pwm_b", +}; + +static const char * const pwm_d_groups[] = { + "pwm_d", +}; + +static const char * const pwm_e_groups[] = { + "pwm_e", +}; + +static const char * const pwm_f_x_groups[] = { + "pwm_f_x", +}; + +static const char * const pwm_f_y_groups[] = { + "pwm_f_y", +}; + static const char * const gpio_aobus_groups[] = { "GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4", "GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9", @@ -528,6 +580,22 @@ static const char * const remote_input_ao_groups[] = { "remote_input_ao", }; +static const char * const pwm_ao_a_3_groups[] = { + "pwm_ao_a_3", +}; + +static const char * const pwm_ao_a_6_groups[] = { + "pwm_ao_a_6", +}; + +static const char * const pwm_ao_a_12_groups[] = { + "pwm_ao_a_12", +}; + +static const char * const pwm_ao_b_groups[] = { + "pwm_ao_b", +}; + static struct meson_pmx_func meson_gxbb_periphs_functions[] = { FUNCTION(gpio_periphs), FUNCTION(emmc), @@ -536,6 +604,13 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = { FUNCTION(uart_b), FUNCTION(uart_c), FUNCTION(eth), + FUNCTION(pwm_a_x), + FUNCTION(pwm_a_y), + FUNCTION(pwm_b), + FUNCTION(pwm_d), + FUNCTION(pwm_e), + FUNCTION(pwm_f_x), + FUNCTION(pwm_f_y), }; static struct meson_pmx_func meson_gxbb_aobus_functions[] = { @@ -545,6 +620,10 @@ static struct meson_pmx_func meson_gxbb_aobus_functions[] = { FUNCTION(i2c_ao), FUNCTION(i2c_slave_ao), FUNCTION(remote_input_ao), + FUNCTION(pwm_ao_a_3), + FUNCTION(pwm_ao_a_6), + FUNCTION(pwm_ao_a_12), + FUNCTION(pwm_ao_b), }; static struct meson_bank meson_gxbb_periphs_banks[] = { -- 1.9.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v2 1/2] pinctrl: meson-gxbb: add pins for PWM @ 2016-08-23 11:25 ` Neil Armstrong 0 siblings, 0 replies; 16+ messages in thread From: Neil Armstrong @ 2016-08-23 11:25 UTC (permalink / raw) To: linux-arm-kernel Add support for PWM pins, for EE and AO domains. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 79 ++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+) diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c index 7eeb053..9ba9172 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c +++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c @@ -193,6 +193,14 @@ static const unsigned int eth_txd1_pins[] = { PIN(GPIOZ_11, EE_OFF) }; static const unsigned int eth_txd2_pins[] = { PIN(GPIOZ_12, EE_OFF) }; static const unsigned int eth_txd3_pins[] = { PIN(GPIOZ_13, EE_OFF) }; +static const unsigned int pwm_a_x_pins[] = { PIN(GPIOX_6, EE_OFF) }; +static const unsigned int pwm_a_y_pins[] = { PIN(GPIOY_16, EE_OFF) }; +static const unsigned int pwm_b_pins[] = { PIN(GPIODV_29, EE_OFF) }; +static const unsigned int pwm_d_pins[] = { PIN(GPIODV_28, EE_OFF) }; +static const unsigned int pwm_e_pins[] = { PIN(GPIOX_19, EE_OFF) }; +static const unsigned int pwm_f_x_pins[] = { PIN(GPIOX_7, EE_OFF) }; +static const unsigned int pwm_f_y_pins[] = { PIN(GPIOY_15, EE_OFF) }; + static const struct pinctrl_pin_desc meson_gxbb_aobus_pins[] = { MESON_PIN(GPIOAO_0, 0), MESON_PIN(GPIOAO_1, 0), @@ -227,6 +235,11 @@ static const unsigned int i2c_slave_sda_ao_pins[] = {PIN(GPIOAO_5, 0) }; static const unsigned int remote_input_ao_pins[] = {PIN(GPIOAO_7, 0) }; +static const unsigned int pwm_ao_a_3_pins[] = { PIN(GPIOAO_3, 0) }; +static const unsigned int pwm_ao_a_6_pins[] = { PIN(GPIOAO_6, 0) }; +static const unsigned int pwm_ao_a_12_pins[] = { PIN(GPIOAO_12, 0) }; +static const unsigned int pwm_ao_b_pins[] = { PIN(GPIOAO_13, 0) }; + static struct meson_pmx_group meson_gxbb_periphs_groups[] = { GPIO_GROUP(GPIOZ_0, EE_OFF), GPIO_GROUP(GPIOZ_1, EE_OFF), @@ -361,12 +374,17 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = { GROUP(uart_rx_a, 4, 12), GROUP(uart_cts_a, 4, 11), GROUP(uart_rts_a, 4, 10), + GROUP(pwm_a_x, 3, 17), + GROUP(pwm_e, 2, 30), + GROUP(pwm_f_x, 3, 18), /* Bank Y */ GROUP(uart_cts_c, 1, 19), GROUP(uart_rts_c, 1, 18), GROUP(uart_tx_c, 1, 17), GROUP(uart_rx_c, 1, 16), + GROUP(pwm_a_y, 1, 21), + GROUP(pwm_f_y, 1, 20), /* Bank Z */ GROUP(eth_mdio, 6, 1), @@ -389,6 +407,8 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = { GROUP(uart_rx_b, 2, 28), GROUP(uart_cts_b, 2, 27), GROUP(uart_rts_b, 2, 26), + GROUP(pwm_b, 3, 21), + GROUP(pwm_d, 3, 20), /* Bank BOOT */ GROUP(emmc_nand_d07, 4, 30), @@ -435,6 +455,10 @@ static struct meson_pmx_group meson_gxbb_aobus_groups[] = { GROUP(i2c_slave_sck_ao, 0, 2), GROUP(i2c_slave_sda_ao, 0, 1), GROUP(remote_input_ao, 0, 0), + GROUP(pwm_ao_a_3, 0, 22), + GROUP(pwm_ao_a_6, 0, 18), + GROUP(pwm_ao_a_12, 0, 17), + GROUP(pwm_ao_b, 0, 3), }; static const char * const gpio_periphs_groups[] = { @@ -502,6 +526,34 @@ static const char * const eth_groups[] = { "eth_txd0", "eth_txd1", "eth_txd2", "eth_txd3", }; +static const char * const pwm_a_x_groups[] = { + "pwm_a_x", +}; + +static const char * const pwm_a_y_groups[] = { + "pwm_a_y", +}; + +static const char * const pwm_b_groups[] = { + "pwm_b", +}; + +static const char * const pwm_d_groups[] = { + "pwm_d", +}; + +static const char * const pwm_e_groups[] = { + "pwm_e", +}; + +static const char * const pwm_f_x_groups[] = { + "pwm_f_x", +}; + +static const char * const pwm_f_y_groups[] = { + "pwm_f_y", +}; + static const char * const gpio_aobus_groups[] = { "GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4", "GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9", @@ -528,6 +580,22 @@ static const char * const remote_input_ao_groups[] = { "remote_input_ao", }; +static const char * const pwm_ao_a_3_groups[] = { + "pwm_ao_a_3", +}; + +static const char * const pwm_ao_a_6_groups[] = { + "pwm_ao_a_6", +}; + +static const char * const pwm_ao_a_12_groups[] = { + "pwm_ao_a_12", +}; + +static const char * const pwm_ao_b_groups[] = { + "pwm_ao_b", +}; + static struct meson_pmx_func meson_gxbb_periphs_functions[] = { FUNCTION(gpio_periphs), FUNCTION(emmc), @@ -536,6 +604,13 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = { FUNCTION(uart_b), FUNCTION(uart_c), FUNCTION(eth), + FUNCTION(pwm_a_x), + FUNCTION(pwm_a_y), + FUNCTION(pwm_b), + FUNCTION(pwm_d), + FUNCTION(pwm_e), + FUNCTION(pwm_f_x), + FUNCTION(pwm_f_y), }; static struct meson_pmx_func meson_gxbb_aobus_functions[] = { @@ -545,6 +620,10 @@ static struct meson_pmx_func meson_gxbb_aobus_functions[] = { FUNCTION(i2c_ao), FUNCTION(i2c_slave_ao), FUNCTION(remote_input_ao), + FUNCTION(pwm_ao_a_3), + FUNCTION(pwm_ao_a_6), + FUNCTION(pwm_ao_a_12), + FUNCTION(pwm_ao_b), }; static struct meson_bank meson_gxbb_periphs_banks[] = { -- 1.9.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v2 1/2] pinctrl: meson-gxbb: add pins for PWM @ 2016-08-23 11:25 ` Neil Armstrong 0 siblings, 0 replies; 16+ messages in thread From: Neil Armstrong @ 2016-08-23 11:25 UTC (permalink / raw) To: linus.walleij, khilman, carlo Cc: Neil Armstrong, linux-arm-kernel, linux-amlogic, linux-kernel, linux-gpio Add support for PWM pins, for EE and AO domains. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 79 ++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+) diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c index 7eeb053..9ba9172 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c +++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c @@ -193,6 +193,14 @@ static const unsigned int eth_txd1_pins[] = { PIN(GPIOZ_11, EE_OFF) }; static const unsigned int eth_txd2_pins[] = { PIN(GPIOZ_12, EE_OFF) }; static const unsigned int eth_txd3_pins[] = { PIN(GPIOZ_13, EE_OFF) }; +static const unsigned int pwm_a_x_pins[] = { PIN(GPIOX_6, EE_OFF) }; +static const unsigned int pwm_a_y_pins[] = { PIN(GPIOY_16, EE_OFF) }; +static const unsigned int pwm_b_pins[] = { PIN(GPIODV_29, EE_OFF) }; +static const unsigned int pwm_d_pins[] = { PIN(GPIODV_28, EE_OFF) }; +static const unsigned int pwm_e_pins[] = { PIN(GPIOX_19, EE_OFF) }; +static const unsigned int pwm_f_x_pins[] = { PIN(GPIOX_7, EE_OFF) }; +static const unsigned int pwm_f_y_pins[] = { PIN(GPIOY_15, EE_OFF) }; + static const struct pinctrl_pin_desc meson_gxbb_aobus_pins[] = { MESON_PIN(GPIOAO_0, 0), MESON_PIN(GPIOAO_1, 0), @@ -227,6 +235,11 @@ static const unsigned int i2c_slave_sda_ao_pins[] = {PIN(GPIOAO_5, 0) }; static const unsigned int remote_input_ao_pins[] = {PIN(GPIOAO_7, 0) }; +static const unsigned int pwm_ao_a_3_pins[] = { PIN(GPIOAO_3, 0) }; +static const unsigned int pwm_ao_a_6_pins[] = { PIN(GPIOAO_6, 0) }; +static const unsigned int pwm_ao_a_12_pins[] = { PIN(GPIOAO_12, 0) }; +static const unsigned int pwm_ao_b_pins[] = { PIN(GPIOAO_13, 0) }; + static struct meson_pmx_group meson_gxbb_periphs_groups[] = { GPIO_GROUP(GPIOZ_0, EE_OFF), GPIO_GROUP(GPIOZ_1, EE_OFF), @@ -361,12 +374,17 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = { GROUP(uart_rx_a, 4, 12), GROUP(uart_cts_a, 4, 11), GROUP(uart_rts_a, 4, 10), + GROUP(pwm_a_x, 3, 17), + GROUP(pwm_e, 2, 30), + GROUP(pwm_f_x, 3, 18), /* Bank Y */ GROUP(uart_cts_c, 1, 19), GROUP(uart_rts_c, 1, 18), GROUP(uart_tx_c, 1, 17), GROUP(uart_rx_c, 1, 16), + GROUP(pwm_a_y, 1, 21), + GROUP(pwm_f_y, 1, 20), /* Bank Z */ GROUP(eth_mdio, 6, 1), @@ -389,6 +407,8 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = { GROUP(uart_rx_b, 2, 28), GROUP(uart_cts_b, 2, 27), GROUP(uart_rts_b, 2, 26), + GROUP(pwm_b, 3, 21), + GROUP(pwm_d, 3, 20), /* Bank BOOT */ GROUP(emmc_nand_d07, 4, 30), @@ -435,6 +455,10 @@ static struct meson_pmx_group meson_gxbb_aobus_groups[] = { GROUP(i2c_slave_sck_ao, 0, 2), GROUP(i2c_slave_sda_ao, 0, 1), GROUP(remote_input_ao, 0, 0), + GROUP(pwm_ao_a_3, 0, 22), + GROUP(pwm_ao_a_6, 0, 18), + GROUP(pwm_ao_a_12, 0, 17), + GROUP(pwm_ao_b, 0, 3), }; static const char * const gpio_periphs_groups[] = { @@ -502,6 +526,34 @@ static const char * const eth_groups[] = { "eth_txd0", "eth_txd1", "eth_txd2", "eth_txd3", }; +static const char * const pwm_a_x_groups[] = { + "pwm_a_x", +}; + +static const char * const pwm_a_y_groups[] = { + "pwm_a_y", +}; + +static const char * const pwm_b_groups[] = { + "pwm_b", +}; + +static const char * const pwm_d_groups[] = { + "pwm_d", +}; + +static const char * const pwm_e_groups[] = { + "pwm_e", +}; + +static const char * const pwm_f_x_groups[] = { + "pwm_f_x", +}; + +static const char * const pwm_f_y_groups[] = { + "pwm_f_y", +}; + static const char * const gpio_aobus_groups[] = { "GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4", "GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9", @@ -528,6 +580,22 @@ static const char * const remote_input_ao_groups[] = { "remote_input_ao", }; +static const char * const pwm_ao_a_3_groups[] = { + "pwm_ao_a_3", +}; + +static const char * const pwm_ao_a_6_groups[] = { + "pwm_ao_a_6", +}; + +static const char * const pwm_ao_a_12_groups[] = { + "pwm_ao_a_12", +}; + +static const char * const pwm_ao_b_groups[] = { + "pwm_ao_b", +}; + static struct meson_pmx_func meson_gxbb_periphs_functions[] = { FUNCTION(gpio_periphs), FUNCTION(emmc), @@ -536,6 +604,13 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = { FUNCTION(uart_b), FUNCTION(uart_c), FUNCTION(eth), + FUNCTION(pwm_a_x), + FUNCTION(pwm_a_y), + FUNCTION(pwm_b), + FUNCTION(pwm_d), + FUNCTION(pwm_e), + FUNCTION(pwm_f_x), + FUNCTION(pwm_f_y), }; static struct meson_pmx_func meson_gxbb_aobus_functions[] = { @@ -545,6 +620,10 @@ static struct meson_pmx_func meson_gxbb_aobus_functions[] = { FUNCTION(i2c_ao), FUNCTION(i2c_slave_ao), FUNCTION(remote_input_ao), + FUNCTION(pwm_ao_a_3), + FUNCTION(pwm_ao_a_6), + FUNCTION(pwm_ao_a_12), + FUNCTION(pwm_ao_b), }; static struct meson_bank meson_gxbb_periphs_banks[] = { -- 1.9.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v2 1/2] pinctrl: meson-gxbb: add pins for PWM 2016-08-23 11:25 ` Neil Armstrong (?) @ 2016-08-24 12:23 ` Linus Walleij -1 siblings, 0 replies; 16+ messages in thread From: Linus Walleij @ 2016-08-24 12:23 UTC (permalink / raw) To: linus-amlogic On Tue, Aug 23, 2016 at 1:25 PM, Neil Armstrong <narmstrong@baylibre.com> wrote: > Add support for PWM pins, for EE and AO domains. > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Patch applied! Yours, Linus Walleij ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 1/2] pinctrl: meson-gxbb: add pins for PWM @ 2016-08-24 12:23 ` Linus Walleij 0 siblings, 0 replies; 16+ messages in thread From: Linus Walleij @ 2016-08-24 12:23 UTC (permalink / raw) To: linux-arm-kernel On Tue, Aug 23, 2016 at 1:25 PM, Neil Armstrong <narmstrong@baylibre.com> wrote: > Add support for PWM pins, for EE and AO domains. > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Patch applied! Yours, Linus Walleij ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v2 1/2] pinctrl: meson-gxbb: add pins for PWM @ 2016-08-24 12:23 ` Linus Walleij 0 siblings, 0 replies; 16+ messages in thread From: Linus Walleij @ 2016-08-24 12:23 UTC (permalink / raw) To: Neil Armstrong Cc: Kevin Hilman, Carlo Caione, linux-arm-kernel@lists.infradead.org, open list:ARM/Amlogic Meson..., linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org On Tue, Aug 23, 2016 at 1:25 PM, Neil Armstrong <narmstrong@baylibre.com> wrote: > Add support for PWM pins, for EE and AO domains. > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Patch applied! Yours, Linus Walleij ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 2/2] ARM64: dts: meson-gxbb: Add PWM pinctrl nodes @ 2016-08-23 11:25 ` Neil Armstrong 0 siblings, 0 replies; 16+ messages in thread From: Neil Armstrong @ 2016-08-23 11:25 UTC (permalink / raw) To: linus-amlogic Add DT nodes for PWMs in EE and AO domains. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 77 +++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index e502c24..9aeb88a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -203,6 +203,34 @@ function = "uart_ao"; }; }; + + pwm_ao_a_3_pins: pwm_ao_a_3 { + mux { + groups = "pwm_ao_a_3"; + function = "pwm_ao_a_3"; + }; + }; + + pwm_ao_a_6_pins: pwm_ao_a_6 { + mux { + groups = "pwm_ao_a_6"; + function = "pwm_ao_a_6"; + }; + }; + + pwm_ao_a_12_pins: pwm_ao_a_12 { + mux { + groups = "pwm_ao_a_12"; + function = "pwm_ao_a_12"; + }; + }; + + pwm_ao_b_pins: pwm_ao_b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; + }; + }; }; uart_AO: serial at 4c0 { @@ -306,6 +334,55 @@ function = "eth"; }; }; + + pwm_a_x_pins: pwm_a_x { + mux { + groups = "pwm_a_x"; + function = "pwm_a_x"; + }; + }; + + pwm_a_y_pins: pwm_a_y { + mux { + groups = "pwm_a_y"; + function = "pwm_a_y"; + }; + }; + + pwm_b_pins: pwm_b { + mux { + groups = "pwm_b"; + function = "pwm_b"; + }; + }; + + pwm_d_pins: pwm_d { + mux { + groups = "pwm_d"; + function = "pwm_d"; + }; + }; + + pwm_e_pins: pwm_e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + }; + }; + + pwm_f_x_pins: pwm_f_x { + mux { + groups = "pwm_f_x"; + function = "pwm_f_x"; + }; + }; + + pwm_f_y_pins: pwm_f_y { + mux { + groups = "pwm_f_y"; + function = "pwm_f_y"; + }; + }; }; }; -- 1.9.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v2 2/2] ARM64: dts: meson-gxbb: Add PWM pinctrl nodes @ 2016-08-23 11:25 ` Neil Armstrong 0 siblings, 0 replies; 16+ messages in thread From: Neil Armstrong @ 2016-08-23 11:25 UTC (permalink / raw) To: linus.walleij, khilman, carlo, devicetree Cc: Neil Armstrong, linux-arm-kernel, linux-amlogic, linux-kernel, linux-gpio Add DT nodes for PWMs in EE and AO domains. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 77 +++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index e502c24..9aeb88a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -203,6 +203,34 @@ function = "uart_ao"; }; }; + + pwm_ao_a_3_pins: pwm_ao_a_3 { + mux { + groups = "pwm_ao_a_3"; + function = "pwm_ao_a_3"; + }; + }; + + pwm_ao_a_6_pins: pwm_ao_a_6 { + mux { + groups = "pwm_ao_a_6"; + function = "pwm_ao_a_6"; + }; + }; + + pwm_ao_a_12_pins: pwm_ao_a_12 { + mux { + groups = "pwm_ao_a_12"; + function = "pwm_ao_a_12"; + }; + }; + + pwm_ao_b_pins: pwm_ao_b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; + }; + }; }; uart_AO: serial@4c0 { @@ -306,6 +334,55 @@ function = "eth"; }; }; + + pwm_a_x_pins: pwm_a_x { + mux { + groups = "pwm_a_x"; + function = "pwm_a_x"; + }; + }; + + pwm_a_y_pins: pwm_a_y { + mux { + groups = "pwm_a_y"; + function = "pwm_a_y"; + }; + }; + + pwm_b_pins: pwm_b { + mux { + groups = "pwm_b"; + function = "pwm_b"; + }; + }; + + pwm_d_pins: pwm_d { + mux { + groups = "pwm_d"; + function = "pwm_d"; + }; + }; + + pwm_e_pins: pwm_e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + }; + }; + + pwm_f_x_pins: pwm_f_x { + mux { + groups = "pwm_f_x"; + function = "pwm_f_x"; + }; + }; + + pwm_f_y_pins: pwm_f_y { + mux { + groups = "pwm_f_y"; + function = "pwm_f_y"; + }; + }; }; }; -- 1.9.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v2 2/2] ARM64: dts: meson-gxbb: Add PWM pinctrl nodes @ 2016-08-23 11:25 ` Neil Armstrong 0 siblings, 0 replies; 16+ messages in thread From: Neil Armstrong @ 2016-08-23 11:25 UTC (permalink / raw) To: linux-arm-kernel Add DT nodes for PWMs in EE and AO domains. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 77 +++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index e502c24..9aeb88a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -203,6 +203,34 @@ function = "uart_ao"; }; }; + + pwm_ao_a_3_pins: pwm_ao_a_3 { + mux { + groups = "pwm_ao_a_3"; + function = "pwm_ao_a_3"; + }; + }; + + pwm_ao_a_6_pins: pwm_ao_a_6 { + mux { + groups = "pwm_ao_a_6"; + function = "pwm_ao_a_6"; + }; + }; + + pwm_ao_a_12_pins: pwm_ao_a_12 { + mux { + groups = "pwm_ao_a_12"; + function = "pwm_ao_a_12"; + }; + }; + + pwm_ao_b_pins: pwm_ao_b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; + }; + }; }; uart_AO: serial at 4c0 { @@ -306,6 +334,55 @@ function = "eth"; }; }; + + pwm_a_x_pins: pwm_a_x { + mux { + groups = "pwm_a_x"; + function = "pwm_a_x"; + }; + }; + + pwm_a_y_pins: pwm_a_y { + mux { + groups = "pwm_a_y"; + function = "pwm_a_y"; + }; + }; + + pwm_b_pins: pwm_b { + mux { + groups = "pwm_b"; + function = "pwm_b"; + }; + }; + + pwm_d_pins: pwm_d { + mux { + groups = "pwm_d"; + function = "pwm_d"; + }; + }; + + pwm_e_pins: pwm_e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + }; + }; + + pwm_f_x_pins: pwm_f_x { + mux { + groups = "pwm_f_x"; + function = "pwm_f_x"; + }; + }; + + pwm_f_y_pins: pwm_f_y { + mux { + groups = "pwm_f_y"; + function = "pwm_f_y"; + }; + }; }; }; -- 1.9.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v2 2/2] ARM64: dts: meson-gxbb: Add PWM pinctrl nodes @ 2016-08-23 11:25 ` Neil Armstrong 0 siblings, 0 replies; 16+ messages in thread From: Neil Armstrong @ 2016-08-23 11:25 UTC (permalink / raw) To: linus.walleij-QSEj5FYQhm4dnm+yROfE0A, khilman-rdvid1DuHRBWk0Htik3J/w, carlo-KA+7E9HrN00dnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA Cc: Neil Armstrong, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-gpio-u79uwXL29TY76Z2rM5mHXA Add DT nodes for PWMs in EE and AO domains. Acked-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org> --- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 77 +++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index e502c24..9aeb88a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -203,6 +203,34 @@ function = "uart_ao"; }; }; + + pwm_ao_a_3_pins: pwm_ao_a_3 { + mux { + groups = "pwm_ao_a_3"; + function = "pwm_ao_a_3"; + }; + }; + + pwm_ao_a_6_pins: pwm_ao_a_6 { + mux { + groups = "pwm_ao_a_6"; + function = "pwm_ao_a_6"; + }; + }; + + pwm_ao_a_12_pins: pwm_ao_a_12 { + mux { + groups = "pwm_ao_a_12"; + function = "pwm_ao_a_12"; + }; + }; + + pwm_ao_b_pins: pwm_ao_b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; + }; + }; }; uart_AO: serial@4c0 { @@ -306,6 +334,55 @@ function = "eth"; }; }; + + pwm_a_x_pins: pwm_a_x { + mux { + groups = "pwm_a_x"; + function = "pwm_a_x"; + }; + }; + + pwm_a_y_pins: pwm_a_y { + mux { + groups = "pwm_a_y"; + function = "pwm_a_y"; + }; + }; + + pwm_b_pins: pwm_b { + mux { + groups = "pwm_b"; + function = "pwm_b"; + }; + }; + + pwm_d_pins: pwm_d { + mux { + groups = "pwm_d"; + function = "pwm_d"; + }; + }; + + pwm_e_pins: pwm_e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + }; + }; + + pwm_f_x_pins: pwm_f_x { + mux { + groups = "pwm_f_x"; + function = "pwm_f_x"; + }; + }; + + pwm_f_y_pins: pwm_f_y { + mux { + groups = "pwm_f_y"; + function = "pwm_f_y"; + }; + }; }; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v2 2/2] ARM64: dts: meson-gxbb: Add PWM pinctrl nodes 2016-08-23 11:25 ` Neil Armstrong (?) @ 2016-09-01 21:11 ` Kevin Hilman -1 siblings, 0 replies; 16+ messages in thread From: Kevin Hilman @ 2016-09-01 21:11 UTC (permalink / raw) To: linus-amlogic Neil Armstrong <narmstrong@baylibre.com> writes: > Add DT nodes for PWMs in EE and AO domains. > > Acked-by: Linus Walleij <linus.walleij@linaro.org> > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Appled. Thanks, Kevin ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 2/2] ARM64: dts: meson-gxbb: Add PWM pinctrl nodes @ 2016-09-01 21:11 ` Kevin Hilman 0 siblings, 0 replies; 16+ messages in thread From: Kevin Hilman @ 2016-09-01 21:11 UTC (permalink / raw) To: linux-arm-kernel Neil Armstrong <narmstrong@baylibre.com> writes: > Add DT nodes for PWMs in EE and AO domains. > > Acked-by: Linus Walleij <linus.walleij@linaro.org> > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Appled. Thanks, Kevin ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v2 2/2] ARM64: dts: meson-gxbb: Add PWM pinctrl nodes @ 2016-09-01 21:11 ` Kevin Hilman 0 siblings, 0 replies; 16+ messages in thread From: Kevin Hilman @ 2016-09-01 21:11 UTC (permalink / raw) To: Neil Armstrong Cc: linus.walleij, carlo, devicetree, linux-arm-kernel, linux-amlogic, linux-kernel, linux-gpio Neil Armstrong <narmstrong@baylibre.com> writes: > Add DT nodes for PWMs in EE and AO domains. > > Acked-by: Linus Walleij <linus.walleij@linaro.org> > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Appled. Thanks, Kevin ^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2016-09-01 21:11 UTC | newest] Thread overview: 16+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-08-23 11:25 [PATCH v2 0/2] pinctrl: meson-gxbb: Export pins for PWMs Neil Armstrong 2016-08-23 11:25 ` Neil Armstrong 2016-08-23 11:25 ` Neil Armstrong 2016-08-23 11:25 ` [PATCH v2 1/2] pinctrl: meson-gxbb: add pins for PWM Neil Armstrong 2016-08-23 11:25 ` Neil Armstrong 2016-08-23 11:25 ` Neil Armstrong 2016-08-24 12:23 ` Linus Walleij 2016-08-24 12:23 ` Linus Walleij 2016-08-24 12:23 ` Linus Walleij 2016-08-23 11:25 ` [PATCH v2 2/2] ARM64: dts: meson-gxbb: Add PWM pinctrl nodes Neil Armstrong 2016-08-23 11:25 ` Neil Armstrong 2016-08-23 11:25 ` Neil Armstrong 2016-08-23 11:25 ` Neil Armstrong 2016-09-01 21:11 ` Kevin Hilman 2016-09-01 21:11 ` Kevin Hilman 2016-09-01 21:11 ` Kevin Hilman
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.