From: khilman@baylibre.com (Kevin Hilman)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 2/3] ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
Date: Thu, 19 Jan 2017 10:02:51 -0800 [thread overview]
Message-ID: <m2wpdrvsfo.fsf@baylibre.com> (raw)
In-Reply-To: <61c3c24d-57cd-b81d-0225-5aae14352397@baylibre.com> (Neil Armstrong's message of "Thu, 19 Jan 2017 09:12:20 +0100")
Neil Armstrong <narmstrong@baylibre.com> writes:
> On 01/18/2017 11:53 PM, Kevin Hilman wrote:
>> Neil Armstrong <narmstrong@baylibre.com> writes:
>>
>>> Adds support for the WeTek Hub and Play2 boards.
>>> The Hub is an extremely small IPTv Set-Top-Box and the Play2 is a more
>>> traditionnal Satellite or Terrestrial and IPTv Set-Top-Box.
>>>
>>> Both are based on the p200 Reference Design and out-of-tree support is
>>> based on OpenELEC kernel at [1].
>>>
>>> [1] https://github.com/wetek-enigma/linux-amlogic
>>>
>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>>
>> Did you get the GPIO/button info from the LibreELEC tree or did you find
>> some schematics someplace? If you found any schematics, it would be
>> nice to have links in the DTS files.
>>
>> Kevin
>>
>
> It was in the dts of the LibreELEC tree, I found no schematics so far.
> I can respin a v2 with a link to the LibreELEC dts files.
No need for a respin. But I'll s/OpenELEC/LibreELEC/ in the commit
message when applying.
Kevin
WARNING: multiple messages have this Message-ID (diff)
From: khilman@baylibre.com (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
Date: Thu, 19 Jan 2017 10:02:51 -0800 [thread overview]
Message-ID: <m2wpdrvsfo.fsf@baylibre.com> (raw)
In-Reply-To: <61c3c24d-57cd-b81d-0225-5aae14352397@baylibre.com> (Neil Armstrong's message of "Thu, 19 Jan 2017 09:12:20 +0100")
Neil Armstrong <narmstrong@baylibre.com> writes:
> On 01/18/2017 11:53 PM, Kevin Hilman wrote:
>> Neil Armstrong <narmstrong@baylibre.com> writes:
>>
>>> Adds support for the WeTek Hub and Play2 boards.
>>> The Hub is an extremely small IPTv Set-Top-Box and the Play2 is a more
>>> traditionnal Satellite or Terrestrial and IPTv Set-Top-Box.
>>>
>>> Both are based on the p200 Reference Design and out-of-tree support is
>>> based on OpenELEC kernel at [1].
>>>
>>> [1] https://github.com/wetek-enigma/linux-amlogic
>>>
>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>>
>> Did you get the GPIO/button info from the LibreELEC tree or did you find
>> some schematics someplace? If you found any schematics, it would be
>> nice to have links in the DTS files.
>>
>> Kevin
>>
>
> It was in the dts of the LibreELEC tree, I found no schematics so far.
> I can respin a v2 with a link to the LibreELEC dts files.
No need for a respin. But I'll s/OpenELEC/LibreELEC/ in the commit
message when applying.
Kevin
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: carlo@caione.org, linux-amlogic@lists.infradead.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 2/3] ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
Date: Thu, 19 Jan 2017 10:02:51 -0800 [thread overview]
Message-ID: <m2wpdrvsfo.fsf@baylibre.com> (raw)
In-Reply-To: <61c3c24d-57cd-b81d-0225-5aae14352397@baylibre.com> (Neil Armstrong's message of "Thu, 19 Jan 2017 09:12:20 +0100")
Neil Armstrong <narmstrong@baylibre.com> writes:
> On 01/18/2017 11:53 PM, Kevin Hilman wrote:
>> Neil Armstrong <narmstrong@baylibre.com> writes:
>>
>>> Adds support for the WeTek Hub and Play2 boards.
>>> The Hub is an extremely small IPTv Set-Top-Box and the Play2 is a more
>>> traditionnal Satellite or Terrestrial and IPTv Set-Top-Box.
>>>
>>> Both are based on the p200 Reference Design and out-of-tree support is
>>> based on OpenELEC kernel at [1].
>>>
>>> [1] https://github.com/wetek-enigma/linux-amlogic
>>>
>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>>
>> Did you get the GPIO/button info from the LibreELEC tree or did you find
>> some schematics someplace? If you found any schematics, it would be
>> nice to have links in the DTS files.
>>
>> Kevin
>>
>
> It was in the dts of the LibreELEC tree, I found no schematics so far.
> I can respin a v2 with a link to the LibreELEC dts files.
No need for a respin. But I'll s/OpenELEC/LibreELEC/ in the commit
message when applying.
Kevin
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: carlo@caione.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 2/3] ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
Date: Thu, 19 Jan 2017 10:02:51 -0800 [thread overview]
Message-ID: <m2wpdrvsfo.fsf@baylibre.com> (raw)
In-Reply-To: <61c3c24d-57cd-b81d-0225-5aae14352397@baylibre.com> (Neil Armstrong's message of "Thu, 19 Jan 2017 09:12:20 +0100")
Neil Armstrong <narmstrong@baylibre.com> writes:
> On 01/18/2017 11:53 PM, Kevin Hilman wrote:
>> Neil Armstrong <narmstrong@baylibre.com> writes:
>>
>>> Adds support for the WeTek Hub and Play2 boards.
>>> The Hub is an extremely small IPTv Set-Top-Box and the Play2 is a more
>>> traditionnal Satellite or Terrestrial and IPTv Set-Top-Box.
>>>
>>> Both are based on the p200 Reference Design and out-of-tree support is
>>> based on OpenELEC kernel at [1].
>>>
>>> [1] https://github.com/wetek-enigma/linux-amlogic
>>>
>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>>
>> Did you get the GPIO/button info from the LibreELEC tree or did you find
>> some schematics someplace? If you found any schematics, it would be
>> nice to have links in the DTS files.
>>
>> Kevin
>>
>
> It was in the dts of the LibreELEC tree, I found no schematics so far.
> I can respin a v2 with a link to the LibreELEC dts files.
No need for a respin. But I'll s/OpenELEC/LibreELEC/ in the commit
message when applying.
Kevin
next prev parent reply other threads:[~2017-01-19 18:02 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-18 10:50 [PATCH 0/3] ARM64: meson-gxbb: Add WeTek Boards Neil Armstrong
2017-01-18 10:50 ` Neil Armstrong
2017-01-18 10:50 ` Neil Armstrong
2017-01-18 10:50 ` Neil Armstrong
2017-01-18 10:50 ` [PATCH 1/3] dt-bindings: vendor-prefix: Add wetek vendor prefix Neil Armstrong
2017-01-18 10:50 ` Neil Armstrong
2017-01-18 10:50 ` Neil Armstrong
2017-01-18 10:50 ` Neil Armstrong
2017-01-21 20:29 ` Rob Herring
2017-01-21 20:29 ` Rob Herring
2017-01-21 20:29 ` Rob Herring
2017-01-21 20:29 ` Rob Herring
2017-01-18 10:50 ` [PATCH 2/3] ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play Neil Armstrong
2017-01-18 10:50 ` Neil Armstrong
2017-01-18 10:50 ` Neil Armstrong
2017-01-18 22:53 ` Kevin Hilman
2017-01-18 22:53 ` Kevin Hilman
2017-01-18 22:53 ` Kevin Hilman
2017-01-18 22:53 ` Kevin Hilman
2017-01-19 8:12 ` Neil Armstrong
2017-01-19 8:12 ` Neil Armstrong
2017-01-19 8:12 ` Neil Armstrong
2017-01-19 8:12 ` Neil Armstrong
2017-01-19 18:02 ` Kevin Hilman [this message]
2017-01-19 18:02 ` Kevin Hilman
2017-01-19 18:02 ` Kevin Hilman
2017-01-19 18:02 ` Kevin Hilman
2017-01-18 10:50 ` [PATCH 3/3] dt-bindings: amlogic: Add WeTek boards Neil Armstrong
2017-01-18 10:50 ` Neil Armstrong
2017-01-18 10:50 ` Neil Armstrong
2017-01-18 10:50 ` Neil Armstrong
2017-01-21 20:30 ` Rob Herring
2017-01-21 20:30 ` Rob Herring
2017-01-21 20:30 ` Rob Herring
2017-01-21 20:30 ` Rob Herring
2017-01-20 15:50 ` [PATCH 0/3] ARM64: meson-gxbb: Add WeTek Boards Kevin Hilman
2017-01-20 15:50 ` Kevin Hilman
2017-01-20 15:50 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m2wpdrvsfo.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.