From: khilman@baylibre.com (Kevin Hilman)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 3/3] ARM64: dts: meson-gx: Prepend GX generic compatible like other nodes
Date: Fri, 10 Mar 2017 16:24:21 -0800 [thread overview]
Message-ID: <m2zigsbqyy.fsf@baylibre.com> (raw)
In-Reply-To: <1489055948-10656-4-git-send-email-narmstrong@baylibre.com> (Neil Armstrong's message of "Thu, 9 Mar 2017 11:39:08 +0100")
Neil Armstrong <narmstrong@baylibre.com> writes:
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Could use a bit more changelog here (in order to support generic
drivers that work for all GX family, blah, blah...)
Kevin
> ---
> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> index 06d70bf..a010ab9 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> @@ -233,7 +233,7 @@
> };
>
> i2c_A: i2c at 8500 {
> - compatible = "amlogic,meson-gxbb-i2c";
> + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
> reg = <0x0 0x08500 0x0 0x20>;
> interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
> #address-cells = <1>;
> @@ -279,7 +279,7 @@
> };
>
> i2c_B: i2c at 87c0 {
> - compatible = "amlogic,meson-gxbb-i2c";
> + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
> reg = <0x0 0x087c0 0x0 0x20>;
> interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
> #address-cells = <1>;
> @@ -288,7 +288,7 @@
> };
>
> i2c_C: i2c at 87e0 {
> - compatible = "amlogic,meson-gxbb-i2c";
> + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
> reg = <0x0 0x087e0 0x0 0x20>;
> interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
> #address-cells = <1>;
> @@ -297,7 +297,7 @@
> };
>
> spifc: spi at 8c80 {
> - compatible = "amlogic,meson-gxbb-spifc";
> + compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
> reg = <0x0 0x08c80 0x0 0x80>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -325,7 +325,7 @@
> };
>
> sram: sram at c8000000 {
> - compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
> + compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
> reg = <0x0 0xc8000000 0x0 0x14000>;
>
> #address-cells = <1>;
> @@ -333,12 +333,12 @@
> ranges = <0 0x0 0xc8000000 0x14000>;
>
> cpu_scp_lpri: scp-shmem at 0 {
> - compatible = "amlogic,meson-gxbb-scp-shmem";
> + compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
> reg = <0x13000 0x400>;
> };
>
> cpu_scp_hpri: scp-shmem at 200 {
> - compatible = "amlogic,meson-gxbb-scp-shmem";
> + compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
> reg = <0x13400 0x400>;
> };
> };
> @@ -390,7 +390,7 @@
> };
>
> ir: ir at 580 {
> - compatible = "amlogic,meson-gxbb-ir";
> + compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
> reg = <0x0 0x00580 0x0 0x40>;
> interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
> status = "disabled";
WARNING: multiple messages have this Message-ID (diff)
From: khilman@baylibre.com (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] ARM64: dts: meson-gx: Prepend GX generic compatible like other nodes
Date: Fri, 10 Mar 2017 16:24:21 -0800 [thread overview]
Message-ID: <m2zigsbqyy.fsf@baylibre.com> (raw)
In-Reply-To: <1489055948-10656-4-git-send-email-narmstrong@baylibre.com> (Neil Armstrong's message of "Thu, 9 Mar 2017 11:39:08 +0100")
Neil Armstrong <narmstrong@baylibre.com> writes:
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Could use a bit more changelog here (in order to support generic
drivers that work for all GX family, blah, blah...)
Kevin
> ---
> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> index 06d70bf..a010ab9 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> @@ -233,7 +233,7 @@
> };
>
> i2c_A: i2c at 8500 {
> - compatible = "amlogic,meson-gxbb-i2c";
> + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
> reg = <0x0 0x08500 0x0 0x20>;
> interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
> #address-cells = <1>;
> @@ -279,7 +279,7 @@
> };
>
> i2c_B: i2c at 87c0 {
> - compatible = "amlogic,meson-gxbb-i2c";
> + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
> reg = <0x0 0x087c0 0x0 0x20>;
> interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
> #address-cells = <1>;
> @@ -288,7 +288,7 @@
> };
>
> i2c_C: i2c at 87e0 {
> - compatible = "amlogic,meson-gxbb-i2c";
> + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
> reg = <0x0 0x087e0 0x0 0x20>;
> interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
> #address-cells = <1>;
> @@ -297,7 +297,7 @@
> };
>
> spifc: spi at 8c80 {
> - compatible = "amlogic,meson-gxbb-spifc";
> + compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
> reg = <0x0 0x08c80 0x0 0x80>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -325,7 +325,7 @@
> };
>
> sram: sram at c8000000 {
> - compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
> + compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
> reg = <0x0 0xc8000000 0x0 0x14000>;
>
> #address-cells = <1>;
> @@ -333,12 +333,12 @@
> ranges = <0 0x0 0xc8000000 0x14000>;
>
> cpu_scp_lpri: scp-shmem at 0 {
> - compatible = "amlogic,meson-gxbb-scp-shmem";
> + compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
> reg = <0x13000 0x400>;
> };
>
> cpu_scp_hpri: scp-shmem at 200 {
> - compatible = "amlogic,meson-gxbb-scp-shmem";
> + compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
> reg = <0x13400 0x400>;
> };
> };
> @@ -390,7 +390,7 @@
> };
>
> ir: ir at 580 {
> - compatible = "amlogic,meson-gxbb-ir";
> + compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
> reg = <0x0 0x00580 0x0 0x40>;
> interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
> status = "disabled";
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: carlo@caione.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 3/3] ARM64: dts: meson-gx: Prepend GX generic compatible like other nodes
Date: Fri, 10 Mar 2017 16:24:21 -0800 [thread overview]
Message-ID: <m2zigsbqyy.fsf@baylibre.com> (raw)
In-Reply-To: <1489055948-10656-4-git-send-email-narmstrong@baylibre.com> (Neil Armstrong's message of "Thu, 9 Mar 2017 11:39:08 +0100")
Neil Armstrong <narmstrong@baylibre.com> writes:
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Could use a bit more changelog here (in order to support generic
drivers that work for all GX family, blah, blah...)
Kevin
> ---
> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> index 06d70bf..a010ab9 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> @@ -233,7 +233,7 @@
> };
>
> i2c_A: i2c@8500 {
> - compatible = "amlogic,meson-gxbb-i2c";
> + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
> reg = <0x0 0x08500 0x0 0x20>;
> interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
> #address-cells = <1>;
> @@ -279,7 +279,7 @@
> };
>
> i2c_B: i2c@87c0 {
> - compatible = "amlogic,meson-gxbb-i2c";
> + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
> reg = <0x0 0x087c0 0x0 0x20>;
> interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
> #address-cells = <1>;
> @@ -288,7 +288,7 @@
> };
>
> i2c_C: i2c@87e0 {
> - compatible = "amlogic,meson-gxbb-i2c";
> + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
> reg = <0x0 0x087e0 0x0 0x20>;
> interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
> #address-cells = <1>;
> @@ -297,7 +297,7 @@
> };
>
> spifc: spi@8c80 {
> - compatible = "amlogic,meson-gxbb-spifc";
> + compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
> reg = <0x0 0x08c80 0x0 0x80>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -325,7 +325,7 @@
> };
>
> sram: sram@c8000000 {
> - compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
> + compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
> reg = <0x0 0xc8000000 0x0 0x14000>;
>
> #address-cells = <1>;
> @@ -333,12 +333,12 @@
> ranges = <0 0x0 0xc8000000 0x14000>;
>
> cpu_scp_lpri: scp-shmem@0 {
> - compatible = "amlogic,meson-gxbb-scp-shmem";
> + compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
> reg = <0x13000 0x400>;
> };
>
> cpu_scp_hpri: scp-shmem@200 {
> - compatible = "amlogic,meson-gxbb-scp-shmem";
> + compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
> reg = <0x13400 0x400>;
> };
> };
> @@ -390,7 +390,7 @@
> };
>
> ir: ir@580 {
> - compatible = "amlogic,meson-gxbb-ir";
> + compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
> reg = <0x0 0x00580 0x0 0x40>;
> interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
> status = "disabled";
next prev parent reply other threads:[~2017-03-11 0:24 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-09 10:39 [PATCH 0/3] ARM64: dts: meson-gx: Cleanup for common nodes Neil Armstrong
2017-03-09 10:39 ` Neil Armstrong
2017-03-09 10:39 ` Neil Armstrong
2017-03-09 10:39 ` Neil Armstrong
2017-03-09 10:39 ` [PATCH 1/3] ARM64: dts: meson-gx: Finally move common nodes to GX dtsi Neil Armstrong
2017-03-09 10:39 ` Neil Armstrong
2017-03-09 10:39 ` Neil Armstrong
2017-03-09 10:39 ` Neil Armstrong
2017-03-11 0:23 ` Kevin Hilman
2017-03-11 0:23 ` Kevin Hilman
2017-03-11 0:23 ` Kevin Hilman
2017-03-13 9:03 ` Neil Armstrong
2017-03-13 9:03 ` Neil Armstrong
2017-03-13 9:03 ` Neil Armstrong
2017-03-09 10:39 ` [PATCH 2/3] ARM64: dts: meson-gx: empty line cleanup Neil Armstrong
2017-03-09 10:39 ` Neil Armstrong
2017-03-09 10:39 ` Neil Armstrong
2017-03-09 10:39 ` Neil Armstrong
2017-03-09 10:39 ` [PATCH 3/3] ARM64: dts: meson-gx: Prepend GX generic compatible like other nodes Neil Armstrong
2017-03-09 10:39 ` Neil Armstrong
2017-03-09 10:39 ` Neil Armstrong
2017-03-09 10:39 ` Neil Armstrong
2017-03-11 0:24 ` Kevin Hilman [this message]
2017-03-11 0:24 ` Kevin Hilman
2017-03-11 0:24 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m2zigsbqyy.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.