From: Peter Osterlund <petero2@telia.com>
To: Vojtech Pavlik <vojtech@suse.cz>
Cc: Pete Zaitcev <zaitcev@redhat.com>,
linux-kernel@vger.kernel.org, dtor_core@ameritech.net
Subject: Re: Touchpad problems with 2.6.11-rc2
Date: 03 Feb 2005 22:54:51 +0100 [thread overview]
Message-ID: <m31xbxxqac.fsf@telia.com> (raw)
In-Reply-To: <20050203064645.GA2342@ucw.cz>
Vojtech Pavlik <vojtech@suse.cz> writes:
> On Wed, Feb 02, 2005 at 11:58:05PM +0100, Peter Osterlund wrote:
>
> > In practice I don't think it will make any significant difference. What
> > the code should do depends on what you want to happen if you move the
> > mouse pointer 1/2 pixel with one finger stroke, then move it another 1/2
> > pixel with a second stroke. The patch I posted will move the pointer one
> > pixel in this case and your code will move it 0 pixels. (The X driver does
> > not reset the fractions, but that doesn't of course mean that it's the
> > only right thing to do.)
> >
> > > Also, I think the extra unary minus is uncoth.
> >
> > The code was written like that to emphasize the fact that X and Y use the
> > same formula, with the only difference that the kernel Y axis is mirrored
> > compared to the touchpad Y axis.
> >
> > It didn't make any difference for the generated assembly code though,
> > using gcc 3.4.2 from Fedora Core 3.
> >
> > > + enum { FRACTION_DENOM = 100 };
> >
> > The enum is much nicer than my #define.
>
> OK. I like this patch, too. Can you guys send me a final version
> incorporating the changes of you both for inclusion in the input tree?
Here it is, with the suggestions from Pete and Dmitry included. The
patch does the following:
* Compensates for the lack of floating point arithmetic by keeping
track of remainders from the integer divisions.
* Removes the xres/yres scaling so that you get the same speed in the
X and Y directions even if your screen is not square.
* Sets scale factors to make the speed for synaptics and alps equal to
each other and equal to the synaptics speed from 2.6.10.
Signed-off-by: Peter Osterlund <petero2@telia.com>
---
linux-petero/drivers/input/mousedev.c | 28 +++++++++++++++++++---------
1 files changed, 19 insertions(+), 9 deletions(-)
diff -puN drivers/input/mousedev.c~mousedev-roundoff drivers/input/mousedev.c
--- linux/drivers/input/mousedev.c~mousedev-roundoff 2005-02-02 20:54:23.000000000 +0100
+++ linux-petero/drivers/input/mousedev.c 2005-02-03 22:41:41.000000000 +0100
@@ -71,6 +71,7 @@ struct mousedev {
struct mousedev_hw_data packet;
unsigned int pkt_count;
int old_x[4], old_y[4];
+ int frac_dx, frac_dy;
unsigned long touch;
};
@@ -117,24 +118,31 @@ static struct mousedev mousedev_mix;
static void mousedev_touchpad_event(struct input_dev *dev, struct mousedev *mousedev, unsigned int code, int value)
{
- int size;
+ int size, tmp;
+ enum { FRACTION_DENOM = 128 };
if (mousedev->touch) {
+ size = dev->absmax[ABS_X] - dev->absmin[ABS_X];
+ if (size == 0) size = 256 * 2;
switch (code) {
case ABS_X:
- size = dev->absmax[ABS_X] - dev->absmin[ABS_X];
- if (size == 0) size = xres;
fx(0) = value;
- if (mousedev->pkt_count >= 2)
- mousedev->packet.dx = ((fx(0) - fx(1)) / 2 + (fx(1) - fx(2)) / 2) * xres / (size * 2);
+ if (mousedev->pkt_count >= 2) {
+ tmp = ((value - fx(2)) * (256 * FRACTION_DENOM)) / size;
+ tmp += mousedev->frac_dx;
+ mousedev->packet.dx = tmp / FRACTION_DENOM;
+ mousedev->frac_dx = tmp - mousedev->packet.dx * FRACTION_DENOM;
+ }
break;
case ABS_Y:
- size = dev->absmax[ABS_Y] - dev->absmin[ABS_Y];
- if (size == 0) size = yres;
fy(0) = value;
- if (mousedev->pkt_count >= 2)
- mousedev->packet.dy = -((fy(0) - fy(1)) / 2 + (fy(1) - fy(2)) / 2) * yres / (size * 2);
+ if (mousedev->pkt_count >= 2) {
+ tmp = -((value - fy(2)) * (256 * FRACTION_DENOM)) / size;
+ tmp += mousedev->frac_dy;
+ mousedev->packet.dy = tmp / FRACTION_DENOM;
+ mousedev->frac_dy = tmp - mousedev->packet.dy * FRACTION_DENOM;
+ }
break;
}
}
@@ -268,6 +276,8 @@ static void mousedev_touchpad_touch(stru
clear_bit(0, &mousedev_mix.packet.buttons);
}
mousedev->touch = mousedev->pkt_count = 0;
+ mousedev->frac_dx = 0;
+ mousedev->frac_dy = 0;
}
else
if (!mousedev->touch)
_
--
Peter Osterlund - petero2@telia.com
http://web.telia.com/~u89404340
next prev parent reply other threads:[~2005-02-03 21:56 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-24 3:01 Touchpad problems with 2.6.11-rc2 Pete Zaitcev
2005-01-30 11:10 ` Peter Osterlund
2005-01-31 23:15 ` Pete Zaitcev
2005-02-01 3:40 ` Dmitry Torokhov
2005-02-01 5:06 ` Pete Zaitcev
2005-02-01 5:14 ` Dmitry Torokhov
2005-02-03 11:18 ` Giuseppe Bilotta
2005-02-02 7:41 ` Pete Zaitcev
2005-02-02 10:20 ` Vojtech Pavlik
2005-02-02 15:51 ` Dmitry Torokhov
2005-02-02 15:57 ` Vojtech Pavlik
2005-02-02 16:56 ` Pete Zaitcev
2005-02-02 17:07 ` Vojtech Pavlik
2005-02-02 17:58 ` Pete Zaitcev
2005-02-02 19:11 ` Vojtech Pavlik
2005-02-02 19:39 ` Pete Zaitcev
2005-02-02 19:55 ` Vojtech Pavlik
2005-02-02 19:39 ` Dmitry Torokhov
2005-02-03 8:30 ` Alexandre Oliva
2005-02-03 8:49 ` Vojtech Pavlik
2005-02-03 15:17 ` Alexandre Oliva
2005-02-03 15:28 ` Dmitry Torokhov
2005-02-03 15:45 ` Vojtech Pavlik
2005-02-02 20:57 ` Peter Osterlund
2005-02-02 21:17 ` Dmitry Torokhov
2005-02-02 21:47 ` Peter Osterlund
2005-02-02 22:06 ` Dmitry Torokhov
2005-02-02 22:27 ` Peter Osterlund
2005-02-03 7:16 ` Dmitry Torokhov
2005-02-02 21:37 ` David Ford
2005-02-02 22:11 ` Pete Zaitcev
2005-02-02 22:58 ` Peter Osterlund
2005-02-03 6:46 ` Vojtech Pavlik
2005-02-03 21:54 ` Peter Osterlund [this message]
2005-02-04 6:17 ` Vojtech Pavlik
2005-02-04 6:40 ` Peter Osterlund
2005-02-04 6:53 ` Vojtech Pavlik
2005-02-04 7:33 ` Peter Osterlund
2005-02-04 13:25 ` Vojtech Pavlik
2005-02-04 13:23 ` Vojtech Pavlik
2005-02-03 6:59 ` Pete Zaitcev
-- strict thread matches above, loose matches on Subject: below --
2005-01-25 19:55 David Brownell
2005-01-25 21:30 ` Dmitry Torokhov
2005-01-30 11:20 ` Peter Osterlund
2005-01-30 20:59 ` David Brownell
2005-01-31 21:46 ` Pete Zaitcev
2005-01-31 22:00 ` Dmitry Torokhov
2005-02-08 10:55 Stephane Raimbault
2005-02-08 17:05 ` Peter Osterlund
2005-02-09 8:47 ` Stephane Raimbault
2005-02-09 18:09 ` Peter Osterlund
2005-02-10 8:32 ` Stephane Raimbault
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m31xbxxqac.fsf@telia.com \
--to=petero2@telia.com \
--cc=dtor_core@ameritech.net \
--cc=linux-kernel@vger.kernel.org \
--cc=vojtech@suse.cz \
--cc=zaitcev@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.