From: Peter Osterlund <petero2@telia.com>
To: Pete Zaitcev <zaitcev@redhat.com>
Cc: vojtech@suse.cz, linux-kernel@vger.kernel.org, <dtor_core@ameritech.net>
Subject: Re: Touchpad problems with 2.6.11-rc2
Date: 02 Feb 2005 21:57:39 +0100 [thread overview]
Message-ID: <m3lla64r3w.fsf@telia.com> (raw)
In-Reply-To: <20050201234148.4d5eac55@localhost.localdomain>
Pete Zaitcev <zaitcev@redhat.com> writes:
> On 30 Jan 2005 12:10:34 +0100, Peter Osterlund <petero2@telia.com> wrote:
>
> > > - Slow motion of finger produces no motion, then a jump. So, it's very hard to
> > > target smaller UI elements and some web links.
> >
> > I see this too when I don't use the X touchpad driver. With the X
> > driver there is no problem. I think the problem is that mousedev.c in
> > the kernel has to use integer arithmetic, so probably small movements
> > are rounded off to 0. I'll try to come up with a fix for this.
>
> Thanks for the hint. I tried various schemes and mathematical transformations
> and found one which gives unquestionably the best result, with smoothest, most
> precise and comfortable pointer movement:
Please try this patch instead. It works well with my alps touchpad. (I
don't have a synaptics touchpad.) It does the following:
* Compensates for the lack of floating point arithmetic by keeping
track of remainders from the integer divisions.
* Removes the xres/yres scaling so that you get the same speed in the
X and Y directions even if your screen is not square.
* Sets scale factors so that the speed for synaptics and alps should
be equal to each other and equal to the synaptics speed from 2.6.10.
Signed-off-by: Peter Osterlund <petero2@telia.com>
---
linux-petero/drivers/input/mousedev.c | 26 +++++++++++++++++---------
1 files changed, 17 insertions(+), 9 deletions(-)
diff -puN drivers/input/mousedev.c~mousedev-roundoff drivers/input/mousedev.c
--- linux/drivers/input/mousedev.c~mousedev-roundoff 2005-02-02 20:54:23.000000000 +0100
+++ linux-petero/drivers/input/mousedev.c 2005-02-02 21:42:39.000000000 +0100
@@ -71,6 +71,7 @@ struct mousedev {
struct mousedev_hw_data packet;
unsigned int pkt_count;
int old_x[4], old_y[4];
+ int frac_dx, frac_dy;
unsigned long touch;
};
@@ -117,24 +118,31 @@ static struct mousedev mousedev_mix;
static void mousedev_touchpad_event(struct input_dev *dev, struct mousedev *mousedev, unsigned int code, int value)
{
- int size;
+ int size, tmp;
+#define FRACTION_DENOM 100
if (mousedev->touch) {
+ size = dev->absmax[ABS_X] - dev->absmin[ABS_X];
+ if (size == 0) size = xres;
switch (code) {
case ABS_X:
- size = dev->absmax[ABS_X] - dev->absmin[ABS_X];
- if (size == 0) size = xres;
fx(0) = value;
- if (mousedev->pkt_count >= 2)
- mousedev->packet.dx = ((fx(0) - fx(1)) / 2 + (fx(1) - fx(2)) / 2) * xres / (size * 2);
+ if (mousedev->pkt_count >= 2) {
+ tmp = ((fx(0) - fx(2)) * (250 * FRACTION_DENOM)) / size;
+ tmp += mousedev->frac_dx;
+ mousedev->packet.dx = tmp / FRACTION_DENOM;
+ mousedev->frac_dx = tmp - mousedev->packet.dx * FRACTION_DENOM;
+ }
break;
case ABS_Y:
- size = dev->absmax[ABS_Y] - dev->absmin[ABS_Y];
- if (size == 0) size = yres;
fy(0) = value;
- if (mousedev->pkt_count >= 2)
- mousedev->packet.dy = -((fy(0) - fy(1)) / 2 + (fy(1) - fy(2)) / 2) * yres / (size * 2);
+ if (mousedev->pkt_count >= 2) {
+ tmp = -((fy(0) - fy(2)) * (250 * FRACTION_DENOM)) / size;
+ tmp += mousedev->frac_dy;
+ mousedev->packet.dy = tmp / FRACTION_DENOM;
+ mousedev->frac_dy = tmp - mousedev->packet.dy * FRACTION_DENOM;
+ }
break;
}
}
_
--
Peter Osterlund - petero2@telia.com
http://web.telia.com/~u89404340
next prev parent reply other threads:[~2005-02-02 21:01 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-24 3:01 Touchpad problems with 2.6.11-rc2 Pete Zaitcev
2005-01-30 11:10 ` Peter Osterlund
2005-01-31 23:15 ` Pete Zaitcev
2005-02-01 3:40 ` Dmitry Torokhov
2005-02-01 5:06 ` Pete Zaitcev
2005-02-01 5:14 ` Dmitry Torokhov
2005-02-03 11:18 ` Giuseppe Bilotta
2005-02-02 7:41 ` Pete Zaitcev
2005-02-02 10:20 ` Vojtech Pavlik
2005-02-02 15:51 ` Dmitry Torokhov
2005-02-02 15:57 ` Vojtech Pavlik
2005-02-02 16:56 ` Pete Zaitcev
2005-02-02 17:07 ` Vojtech Pavlik
2005-02-02 17:58 ` Pete Zaitcev
2005-02-02 19:11 ` Vojtech Pavlik
2005-02-02 19:39 ` Pete Zaitcev
2005-02-02 19:55 ` Vojtech Pavlik
2005-02-02 19:39 ` Dmitry Torokhov
2005-02-03 8:30 ` Alexandre Oliva
2005-02-03 8:49 ` Vojtech Pavlik
2005-02-03 15:17 ` Alexandre Oliva
2005-02-03 15:28 ` Dmitry Torokhov
2005-02-03 15:45 ` Vojtech Pavlik
2005-02-02 20:57 ` Peter Osterlund [this message]
2005-02-02 21:17 ` Dmitry Torokhov
2005-02-02 21:47 ` Peter Osterlund
2005-02-02 22:06 ` Dmitry Torokhov
2005-02-02 22:27 ` Peter Osterlund
2005-02-03 7:16 ` Dmitry Torokhov
2005-02-02 21:37 ` David Ford
2005-02-02 22:11 ` Pete Zaitcev
2005-02-02 22:58 ` Peter Osterlund
2005-02-03 6:46 ` Vojtech Pavlik
2005-02-03 21:54 ` Peter Osterlund
2005-02-04 6:17 ` Vojtech Pavlik
2005-02-04 6:40 ` Peter Osterlund
2005-02-04 6:53 ` Vojtech Pavlik
2005-02-04 7:33 ` Peter Osterlund
2005-02-04 13:25 ` Vojtech Pavlik
2005-02-04 13:23 ` Vojtech Pavlik
2005-02-03 6:59 ` Pete Zaitcev
-- strict thread matches above, loose matches on Subject: below --
2005-01-25 19:55 David Brownell
2005-01-25 21:30 ` Dmitry Torokhov
2005-01-30 11:20 ` Peter Osterlund
2005-01-30 20:59 ` David Brownell
2005-01-31 21:46 ` Pete Zaitcev
2005-01-31 22:00 ` Dmitry Torokhov
2005-02-08 10:55 Stephane Raimbault
2005-02-08 17:05 ` Peter Osterlund
2005-02-09 8:47 ` Stephane Raimbault
2005-02-09 18:09 ` Peter Osterlund
2005-02-10 8:32 ` Stephane Raimbault
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m3lla64r3w.fsf@telia.com \
--to=petero2@telia.com \
--cc=dtor_core@ameritech.net \
--cc=linux-kernel@vger.kernel.org \
--cc=vojtech@suse.cz \
--cc=zaitcev@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.