* Problem: USB with vt8233a southbrigde not recognized
@ 2003-01-07 8:31 Mathieu Roy
0 siblings, 0 replies; only message in thread
From: Mathieu Roy @ 2003-01-07 8:31 UTC (permalink / raw)
To: linux-kernel
I'm trying to get USB working on my VIA MS9107C+ mainboard. But it's
apparently not recognized, despite the fact that others features of
the mainboard seem ok.
With usbcore (etc) loaded (in fact, included in the kernel mainly), I
cannot insmod usb-uhci nor ehci-hcd nor uhci.
The kernel is:
Linux version 2.4.21-pre2 (moa@dionysos) (gcc version 2.95.4 20011002 (Debian prerelease)) #7 mar jan 7 08:12:32 CET 2003
Error message I got is like:
Using /lib/modules/2.4.21-pre2/kernel/drivers/usb/usb-uhci.o
/lib/modules/2.4.21-pre2/kernel/drivers/usb/usb-uhci.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
In syslog, I find something like:
Jan 7 09:08:22 dionysos kernel: usb-uhci.c: $Revision: 1.275 $ time 08:19:04 Jan 7 2003
Jan 7 09:08:22 dionysos kernel: usb-uhci.c: High bandwidth mode enabled
Jan 7 09:08:22 dionysos kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
The distro is Debian GNU/Linux sarge (testing).
Here the result of script/sh_version:
Linux dionysos 2.4.21-pre2 #7 mar jan 7 08:12:32 CET 2003 i686 Intel(R) Pentium(R) 4 CPU 1.70GHz GenuineIntel GNU/Linux
Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.19
e2fsprogs 1.30-WIP
pcmcia-cs 3.1.33
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 4.5.2
Modules Loaded af_packet vfat fat it87 eeprom i2c-proc
i2c-isa i2c-viapro cpuid sound radeon 8139too mii unix
/proc/cpuinfo:
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 1
model name : Intel(R) Pentium(R) 4 CPU 1.70GHz
stepping : 2
cpu MHz : 1700.067
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 3381.65
/proc/modules
piix 6912 0 (unused)
af_packet 11656 1 (autoclean)
vfat 9292 1 (autoclean)
fat 29432 0 (autoclean) [vfat]
it87 6728 0
eeprom 3440 0
i2c-proc 6000 0 [it87 eeprom]
i2c-isa 1164 0 (unused)
i2c-viapro 3860 0 (unused)
cpuid 904 0 (unused)
sound 52844 0 (unused)
radeon 86912 0 (unused)
8139too 13736 1
mii 2336 0 [8139too]
unix 13640 79 (autoclean)
/proc/iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0ffeffff : System RAM
00100000-0025f7c6 : Kernel code
0025f7c7-002f1d83 : Kernel data
0fff0000-0fff2fff : ACPI Non-volatile Storage
0fff3000-0fffffff : ACPI Tables
e0000000-e7ffffff : PCI Bus #01
e0000000-e7ffffff : ATI Technologies Inc Radeon 7500 QW
e0000000-e7ffffff : radeonfb
e8000000-ebffffff : VIA Technologies, Inc. VT8753 [P4X266 AGP]
ec000000-edffffff : PCI Bus #01
ed000000-ed00ffff : ATI Technologies Inc Radeon 7500 QW
ed000000-ed00ffff : radeonfb
ef000000-ef000fff : Tekram Technology Co.,Ltd. TRM-S1040
ef001000-ef0010ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
ef001000-ef0010ff : 8139too
ffff0000-ffffffff : reserved
/proc/ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
0290-0297 : it87
02f8-02ff : serial(set)
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0500-0507 : viapro-smbus
0cf8-0cff : PCI conf1
c000-cfff : PCI Bus #01
c000-c0ff : ATI Technologies Inc Radeon 7500 QW
d000-d0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
d000-d0ff : 8139too
d400-d4ff : Tekram Technology Co.,Ltd. TRM-S1040
d400-d47f : DC395x_TRM
d800-d83f : Ensoniq 5880 AudioPCI
d800-d83f : es1371
dc00-dc0f : VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
dc00-dc07 : ide0
dc08-dc0f : ide1
e800-e8ff : VIA Technologies, Inc. VT8233 AC97 Audio Controller
lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT8753 [P4X266 AGP] (rev 01)
Subsystem: Elitegroup Computer Systems: Unknown device 0a75
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=x4
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: ec000000-edffffff
Prefetchable memory behind bridge: e0000000-e7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at ef001000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 SCSI storage controller: Tekram Technology Co.,Ltd. TRM-S1040 (rev 01)
Subsystem: Tekram Technology Co.,Ltd. TRM-S1040
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at ef000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d800 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
Subsystem: Elitegroup Computer Systems: Unknown device 0a75
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at dc00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 40)
Subsystem: Elitegroup Computer Systems: Unknown device 0a75
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 11
Region 0: I/O ports at e800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon 7500 QW (prog-if 00 [VGA])
Subsystem: C.P. Technology Co. Ltd: Unknown device 2025
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at ed000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=47 SBA+ 64bit- FW- Rate=x1,x2,x4
Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
/proc/scsi/scsi:
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: YAMAHA Model: CRW2100S Rev: 1.0K
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: TEAC Model: CD-ROM CD-532S Rev: 1.0A
Type: CD-ROM ANSI SCSI revision: 02
I also posted a similar message on via forums. Maybe they can give
usefull informations.
http://forums.viaarena.com/messageview.cfm?catid=28&threadid=29239
Am I missing something?
Regards,
--
Mathieu Roy
<< Profile << http://savannah.gnu.org/users/yeupou <<
>> Homepage >> http://yeupou.coleumes.org >>
<< GPG Key << http://stock.coleumes.org/gpg <<
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-01-07 8:22 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-01-07 8:31 Problem: USB with vt8233a southbrigde not recognized Mathieu Roy
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.