From: "Georg C. F. Greve" <greve-mXXj517/zsQ@public.gmane.org>
To: Nathan Bryant <nbryant-p32f3XyCuykqcZcGjlUOXw@public.gmane.org>
Cc: ACPI Developers
<acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>,
"Li,
Shaohua" <shaohua.li-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Subject: Re: acpi-20040715: functional regression on ASUS M2N
Date: Fri, 06 Aug 2004 18:54:25 +0200 [thread overview]
Message-ID: <m3u0vgurzy.fsf@reason.gnu-hamburg> (raw)
In-Reply-To: <41138944.3060309-p32f3XyCuykqcZcGjlUOXw@public.gmane.org> (Nathan Bryant's message of "Fri, 06 Aug 2004 09:36:04 -0400")
[-- Attachment #1.1: Type: text/plain, Size: 505 bytes --]
|| On Fri, 06 Aug 2004 09:36:04 -0400
|| Nathan Bryant <nbryant-p32f3XyCuykqcZcGjlUOXw@public.gmane.org> wrote:
nb> The attached patch is good enough. Since the call to restore_ELCR
nb> is crashing you, we comment it out, and log the raw values from
nb> save_ELCR:
Thanks.
Okay, took same 2.6.7, applied patches.
Here is what it said for my machine during resume from suspend to ram:
i8259: saving ELCR: 0xfffffff0 0x0a
nb> By the way, can you send the output of lspci?
Sure, here it is:
[-- Attachment #1.2: lspci-vvv --]
[-- Type: application/octet-stream, Size: 10482 bytes --]
0000:00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 1751
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: [40] #09 [a105]
0000:00:00.1 System peripheral: Intel Corp. 855GM/GME GMCH Memory I/O Control Registers (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 175a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:00.3 System peripheral: Intel Corp. 855GM/GME GMCH Configuration Process Registers (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 175b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 1712
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at dc00 [size=8]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:02.1 Display controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 1712
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at ff980000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1758
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at d480 [size=32]
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1758
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at d800 [size=32]
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1758
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 7
Region 4: I/O ports at d880 [size=32]
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1759
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 4
Region 0: Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [2080]
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: ff700000-ff7fffff
Prefetchable memory behind bridge: dea00000-deafffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 1758
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 1f800000 (32-bit, non-prefetchable) [size=1K]
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
Subsystem: Asustek Computer, Inc.: Unknown device 1713
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 6
Region 0: I/O ports at e000 [size=256]
Region 1: I/O ports at e100 [size=64]
Region 2: Memory at 1f800400 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at 1f800600 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9)
Subsystem: Asustek Computer, Inc.: Unknown device 1754
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 6
Region 0: Memory at 1f801000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 1fc00000-1ffff000 (prefetchable)
Memory window 1: 20000000-203ff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
0000:01:03.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9)
Subsystem: Asustek Computer, Inc.: Unknown device 1754
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin B routed to IRQ 7
Region 0: Memory at 1f802000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 20400000-207ff000 (prefetchable)
Memory window 1: 20800000-20bff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
0000:01:03.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 01) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1757
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin C routed to IRQ 11
Region 0: Memory at ff7ef000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME+
0000:01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Asustek Computer, Inc.: Unknown device 1045
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c800 [size=256]
Region 1: Memory at ff7efc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:05.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
Subsystem: Intel Corp. MIM2000/Centrino
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 8500ns max), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 7
Region 0: Memory at ff7ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
[-- Attachment #1.3: Type: text/plain, Size: 478 bytes --]
If you want to know more about my machine, you can also check out
http://bugzilla.kernel.org/show_bug.cgi?id=1774
which is where I also gave some more info.
If I can help you with anything else, please let me know.
Regards,
Georg
--
Georg C. F. Greve <greve-mXXj517/zsQ@public.gmane.org>
Free Software Foundation Europe (http://fsfeurope.org)
Brave GNU World (http://brave-gnu-world.org)
[-- Attachment #2: Type: application/pgp-signature, Size: 188 bytes --]
next prev parent reply other threads:[~2004-08-06 16:54 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-05 18:49 acpi-20040715: functional regression on ASUS M2N Nathan Bryant
[not found] ` <4112814C.2070808-p32f3XyCuykqcZcGjlUOXw@public.gmane.org>
2004-08-06 11:21 ` Georg C. F. Greve
[not found] ` <m37jsc3424.fsf-glUV91rXKAHWIjgkaejU9x2eb7JE58TQ@public.gmane.org>
2004-08-06 13:36 ` Nathan Bryant
[not found] ` <41138944.3060309-p32f3XyCuykqcZcGjlUOXw@public.gmane.org>
2004-08-06 16:54 ` Georg C. F. Greve [this message]
[not found] ` <m3u0vgurzy.fsf-glUV91rXKAHWIjgkaejU9x2eb7JE58TQ@public.gmane.org>
2004-08-06 17:07 ` Nathan Bryant
[not found] ` <4113BAD5.1030909-p32f3XyCuykqcZcGjlUOXw@public.gmane.org>
2004-08-06 20:50 ` Georg C. F. Greve
2004-08-31 8:15 ` Georg C. F. Greve
2004-08-06 15:23 ` Matthew Garrett
2004-08-06 15:50 ` Nathan Bryant
2004-08-06 16:38 ` Nate Lawson
2004-08-06 19:32 ` Nathan Bryant
-- strict thread matches above, loose matches on Subject: below --
2004-08-31 8:45 Li, Shaohua
[not found] ` <B44D37711ED29844BEA67908EAF36F03AC6ACF-4yWAQGcml65pB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2004-08-31 13:38 ` Georg C. F. Greve
[not found] ` <m3zn4bbf6x.fsf-eMhNhoSsuh6q92djB/mqZw@public.gmane.org>
2004-09-01 15:16 ` Georg C. F. Greve
2004-08-09 8:10 Li, Shaohua
2004-08-02 16:45 Nathan Bryant
[not found] ` <410E6F9C.2040904-p32f3XyCuykqcZcGjlUOXw@public.gmane.org>
2004-08-04 0:23 ` Georg C. F. Greve
2004-07-27 12:24 Li, Shaohua
[not found] ` <B44D37711ED29844BEA67908EAF36F036BCD7C-4yWAQGcml65pB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2004-07-27 13:42 ` Georg C. F. Greve
2004-07-19 23:31 Georg C. F. Greve
[not found] ` <m3d62rzi9a.fsf-eMhNhoSsuh6q92djB/mqZw@public.gmane.org>
2004-07-20 19:03 ` Matthew Garrett
[not found] ` <1090350197.4828.5.camel-myFlNLNQP+Q@public.gmane.org>
2004-07-21 8:17 ` Georg C. F. Greve
[not found] ` <m3acxthizw.fsf-eMhNhoSsuh6q92djB/mqZw@public.gmane.org>
2004-07-27 11:14 ` Georg C. F. Greve
[not found] ` <m3oem1u2gg.fsf-glUV91rXKAHWIjgkaejU9x2eb7JE58TQ@public.gmane.org>
2004-07-27 11:24 ` Matthew Garrett
[not found] ` <1090927462.4412.26.camel-myFlNLNQP+Q@public.gmane.org>
2004-07-27 13:40 ` Georg C. F. Greve
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m3u0vgurzy.fsf@reason.gnu-hamburg \
--to=greve-mxxj517/zsq@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=nbryant-p32f3XyCuykqcZcGjlUOXw@public.gmane.org \
--cc=shaohua.li-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.