* shuttle an50r Motherboard and Linux
@ 2004-03-08 0:11 John Covici
2004-03-08 0:51 ` Bartlomiej Zolnierkiewicz
0 siblings, 1 reply; 6+ messages in thread
From: John Covici @ 2004-03-08 0:11 UTC (permalink / raw)
To: linux-kernel
Hi. I have had a couple of problems trying to get this Motherboard
to work correctly under Linux.
The Ethernet 10/100 is supposed to be an RC82540m, but the e100
module does not recognize it. If you do an lspci it doesn't say
Intel at all, but just Nvidia and Shuttle. Am I doing something
wrong, or is there a better driver in 2.6 than 2.4 or what?
Also, I am using the amd74xx driver for the chip set, but it does not
seem to activate dma or announce udma and a number as the via one
does -- is this the correct driver?
Any assistance would be appreciated.
--
John Covici
covici@ccs.covici.com
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: shuttle an50r Motherboard and Linux 2004-03-08 0:11 shuttle an50r Motherboard and Linux John Covici @ 2004-03-08 0:51 ` Bartlomiej Zolnierkiewicz 2004-03-08 15:13 ` John covici 0 siblings, 1 reply; 6+ messages in thread From: Bartlomiej Zolnierkiewicz @ 2004-03-08 0:51 UTC (permalink / raw) To: John Covici; +Cc: linux-kernel Hi, On Monday 08 of March 2004 01:11, John Covici wrote: > Hi. I have had a couple of problems trying to get this Motherboard > to work correctly under Linux. > > The Ethernet 10/100 is supposed to be an RC82540m, but the e100 > module does not recognize it. If you do an lspci it doesn't say > Intel at all, but just Nvidia and Shuttle. Am I doing something > wrong, or is there a better driver in 2.6 than 2.4 or what? > > Also, I am using the amd74xx driver for the chip set, but it does not > seem to activate dma or announce udma and a number as the via one > does -- is this the correct driver? What kernel version(s) are you using? What are the boot messages ('dmesg' command output)? What is the output of 'lspci' command? Regards, Bartlomiej ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: shuttle an50r Motherboard and Linux 2004-03-08 0:51 ` Bartlomiej Zolnierkiewicz @ 2004-03-08 15:13 ` John covici 2004-03-08 15:33 ` Bartlomiej Zolnierkiewicz 0 siblings, 1 reply; 6+ messages in thread From: John covici @ 2004-03-08 15:13 UTC (permalink / raw) To: Bartlomiej Zolnierkiewicz; +Cc: John Covici, linux-kernel OK, here are the relevant parts of the lspci -v -- I have been using 2.4.22, but if it will make a difference I will try newer ones. 00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device a550 Flags: bus master, 66Mhz, fast devsel, latency 0 Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: [44] #08 [0180] Capabilities: [c0] AGP version 3.0 00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device a550 Flags: bus master, 66Mhz, fast devsel, latency 0 00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device a550 Flags: 66Mhz, fast devsel, IRQ 5 I/O ports at 4c00 [size=64] I/O ports at 4c40 [size=64] Capabilities: [44] Power Management version 2 00:05.0 Ethernet controller: nVidia Corporation nForce3 Ethernet (rev a5) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device a550 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 5 Memory at e8000000 (32-bit, non-prefetchable) [size=4K] I/O ports at d000 [size=8] Capabilities: [44] Power Management version 2 on Monday 03/08/2004 Bartlomiej Zolnierkiewicz(B.Zolnierkiewicz@elka.pw.edu.pl) wrote > > Hi, > > On Monday 08 of March 2004 01:11, John Covici wrote: > > Hi. I have had a couple of problems trying to get this Motherboard > > to work correctly under Linux. > > > > The Ethernet 10/100 is supposed to be an RC82540m, but the e100 > > module does not recognize it. If you do an lspci it doesn't say > > Intel at all, but just Nvidia and Shuttle. Am I doing something > > wrong, or is there a better driver in 2.6 than 2.4 or what? > > > > Also, I am using the amd74xx driver for the chip set, but it does not > > seem to activate dma or announce udma and a number as the via one > > does -- is this the correct driver? > > What kernel version(s) are you using? > What are the boot messages ('dmesg' command output)? > What is the output of 'lspci' command? > > Regards, > Bartlomiej -- John Covici covici@ccs.covici.com ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: shuttle an50r Motherboard and Linux 2004-03-08 15:13 ` John covici @ 2004-03-08 15:33 ` Bartlomiej Zolnierkiewicz 2004-03-08 15:37 ` John covici 0 siblings, 1 reply; 6+ messages in thread From: Bartlomiej Zolnierkiewicz @ 2004-03-08 15:33 UTC (permalink / raw) To: covici; +Cc: John Covici, linux-kernel On Monday 08 of March 2004 16:13, John covici wrote: > OK, here are the relevant parts of the lspci -v -- I have been using IDE interface is missed. > 2.4.22, but if it will make a difference I will try newer ones. 2.4.x needs update of amd74xx.c driver. 2.6.x should be okay. Bartlomiej ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: shuttle an50r Motherboard and Linux 2004-03-08 15:33 ` Bartlomiej Zolnierkiewicz @ 2004-03-08 15:37 ` John covici 2004-03-11 16:37 ` John Covici 0 siblings, 1 reply; 6+ messages in thread From: John covici @ 2004-03-08 15:37 UTC (permalink / raw) To: Bartlomiej Zolnierkiewicz; +Cc: covici, linux-kernel Sorry, here it is. 00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5) (prog-if 8a [Master SecP PriP]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device a550 Flags: bus master, 66Mhz, fast devsel, latency 0 I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 on Monday 03/08/2004 Bartlomiej Zolnierkiewicz(B.Zolnierkiewicz@elka.pw.edu.pl) wrote > On Monday 08 of March 2004 16:13, John covici wrote: > > OK, here are the relevant parts of the lspci -v -- I have been using > > IDE interface is missed. > > > 2.4.22, but if it will make a difference I will try newer ones. > > 2.4.x needs update of amd74xx.c driver. 2.6.x should be okay. > > Bartlomiej -- John Covici covici@ccs.covici.com ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: shuttle an50r Motherboard and Linux 2004-03-08 15:37 ` John covici @ 2004-03-11 16:37 ` John Covici 0 siblings, 0 replies; 6+ messages in thread From: John Covici @ 2004-03-11 16:37 UTC (permalink / raw) To: linux-kernel OK, I have just tried 2.6.2 and although it recognizes the chip, it sets all the disks to udma33 whereas I know at least two of them will work at 133. Any ideas? on Mon, 8 Mar 2004 10:37:47 -0500 John covici <covici@ccs.covici.com> wrote: > Sorry, here it is. > > 00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5) (prog-if 8a [Master SecP PriP]) > Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device a550 > Flags: bus master, 66Mhz, fast devsel, latency 0 > I/O ports at f000 [size=16] > Capabilities: [44] Power Management version 2 > > on Monday 03/08/2004 Bartlomiej Zolnierkiewicz(B.Zolnierkiewicz@elka.pw.edu.pl) wrote > > On Monday 08 of March 2004 16:13, John covici wrote: > > > OK, here are the relevant parts of the lspci -v -- I have been using > > > > IDE interface is missed. > > > > > 2.4.22, but if it will make a difference I will try newer ones. > > > > 2.4.x needs update of amd74xx.c driver. 2.6.x should be okay. > > > > Bartlomiej > > -- > John Covici > covici@ccs.covici.com > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- John Covici covici@ccs.covici.com ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-03-11 16:37 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2004-03-08 0:11 shuttle an50r Motherboard and Linux John Covici 2004-03-08 0:51 ` Bartlomiej Zolnierkiewicz 2004-03-08 15:13 ` John covici 2004-03-08 15:33 ` Bartlomiej Zolnierkiewicz 2004-03-08 15:37 ` John covici 2004-03-11 16:37 ` John Covici
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.