All of lore.kernel.org
 help / color / mirror / Atom feed
* No subject
@ 2007-02-14  8:32 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2007-02-14  8:32 UTC (permalink / raw)
  To: buildroot

the build_i386/staging_dir. It seems to be creating a full usr/include,
usr/lib, etc directory hierarchy under inside build_i386/staging_dir,
rather than integrating with the include/lib/etc dirs that exist at the
staging_dir level (ie. the installation of gettext files occurs at one
level too deep)

This means that libintl.h and the shared libraries aren't where other apps
expect it and compilation errors can occur.

The attached patch fixes this - hope it's ok.

Cheers,

Marcus
====================================================================== 

---------------------------------------------------------------------- 
 prpplague - 05-24-06 07:49  
---------------------------------------------------------------------- 
fixed as of revision 15160 

---------------------------------------------------------------------- 
 bernhardf - 03-20-07 11:02  
---------------------------------------------------------------------- 
This was apparently fixed back in r15160. Closing (again). 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
11-29-05 07:56  crafterm       New Issue                                    
11-29-05 07:56  crafterm       Status                   new => assigned     
11-29-05 07:56  crafterm       Assigned To               => uClibc          
11-29-05 07:56  crafterm       File Added: gettext-stagingfix.patch             
      
05-24-06 07:49  prpplague      Note Added: 0001377                          
05-24-06 07:49  prpplague      Status                   assigned => closed  
02-12-07 05:45  vapier         Status                   closed => assigned  
02-12-07 05:45  vapier         Assigned To              uClibc => buildroot 
03-20-07 11:02  bernhardf      Status                   assigned => closed  
03-20-07 11:02  bernhardf      Note Added: 0002256                          
======================================================================

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2023-08-31  7:20 Peter Yin
  0 siblings, 0 replies; 335+ messages in thread
From: Peter Yin @ 2023-08-31  7:20 UTC (permalink / raw)
  To: linux-aspeed

Subject: [PATCH v6 0/2] *** Add Facebook Minerva (AST2600) BMC ***

v1 link : https://lore.kernel.org/all/fb09f5e6-8381-312f-2f1e-f2b471cec68a at linaro.org/
v2 link : https://lore.kernel.org/lkml/9f499fe5-db59-f4c8-6a50-93725b7287fd at linaro.org/
v3 link : https://lore.kernel.org/lkml/20230830025133.3756506-1-peteryin.openbmc at gmail.com/
v4 link : https://lore.kernel.org/all/1d531692-5455-fbfd-0775-50856bf0fbc7 at linaro.org/
v5 link : https://lore.kernel.org/all/5347163b-c225-d805-d851-fe28e6b57c56 at gmail.com/

Change log:
v6: 1.Correcting the arrangement order in Makefile.

v5: 1.remove redundant blank line.
    2.Correcting the arrangement order in document.

v4:
    1.seprate dts document.

v3:
    1.Fixed commit description.
    2.Add sgpio line name to sgpioP.
    3.Add ipmb debug card bus.

v2:
    1.Add facebook,minerva-bmc in aspeed.yaml
    2.Use stdout-path
    3.Add Makefile

v1:
    1. Create minerva dts file.
*** BLURB HERE ***

Peter Yin (2):
  ARM: dts: aspeed: Minerva: Add Facebook Minerva (AST2600) BMC
  dt-bindings: arm: aspeed: add Meta Minerva board

 .../bindings/arm/aspeed/aspeed.yaml           |   1 +
 arch/arm/boot/dts/Makefile                    |   1 +
 .../boot/dts/aspeed-bmc-facebook-minerva.dts  | 377 ++++++++++++++++++
 3 files changed, 379 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-minerva.dts

-- 
2.25.1


^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2022-06-21  9:06 ventas
  0 siblings, 0 replies; 335+ messages in thread
From: ventas @ 2022-06-21  9:06 UTC (permalink / raw)
  To: barebox

Hi!

I'm going to make you an offer you can't refuse. If reputation means anything to you.
I am a programmer who likes to dig into other people's dirty laundry and I hack into cell phones, laptops, computers, tablets of users like you in order to extract from them "interesting" photos, videos, recordings of conversations or correspondence.

I infected your device with a virus and have been watching you for over 2 months now. 
During these months, I have accumulated a lot of interesting information about you.
Not only do I have access to your phone book, correspondence, audio, but I also have information about the sites you visit. Can you guess what I'm talking about?

I collect a selection of photos and videos, audio recordings, correspondence from the devices of users like you with the help of viruses and copy them to my own server.
 
I've got some bad news for you. I can leak all of this online for general access, send it to your friends, relatives, acquaintances, send it to social networks and messengers. 
Trust me. This is something that can destroy your reputation once and for all!
The effect will be fantastic! They will see what you do in all its glory. It only takes one click for me to leak the information.
You have the power to stop it. 
What do you have to do to stop it? I'll tell you about that next.

You need to make a $1300 (US dollars) transfer to my bitcoin wallet. If you do not know how such transfers are made, just type in Google query: "Buy Bitcoin".
My bitcoin wallet (BTC Wallet): bc1q9zquts6kn9zm 9mxr4n06hwjqfxns05sex8nehj (without space in wallet)
Nothing complicated, right? 
After receiving the specified amount, I will immediately delete all the information and leave you alone forever!
But you need to hurry up. I don't like to wait long!
I'll give you 48 hours.
Don't think you can ignore me. After you read this message, I automatically get a notification about it. 
>From then on, you have two days to pay!
Yes. You don't need to try to apply for help to resolve this situation. Bitcoin wallet is untraceable, and the sender address is automatically created.
But if I happen to know that you share this email with someone else (and I will), I'll do a newsletter right away!
I hope you make the right choice!




^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2019-08-21 15:45 Ivan Mikhaylov
  0 siblings, 0 replies; 335+ messages in thread
From: Ivan Mikhaylov @ 2019-08-21 15:45 UTC (permalink / raw)
  To: linux-aspeed

From 1687adb615ceb7a4013712604f177dc906059667 Mon Sep 17 00:00:00 2001
From: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Date: Wed, 21 Aug 2019 18:21:05 +
Subject: [PATCH 0/3] add dual-boot support

ASPEED SoCs support dual-boot feature for SPI Flash.
When strapped appropriately, the SoC starts wdt2 (/dev/watchdog1)
and if within a minute it is not disabled, it goes off and reboots
the SoC from an alternate SPI Flash chip by changing CS0 controls
to actually drive CS1 line.

When booted from alternate chip, in order to access the main chip
at CS0, the user must reset the appropriate bit in the watchdog
hardware. There is no interface that would allow to do that from
an embedded firmware startup script.

This commit implements support for that feature:

* Enable 'alt-boot' option for wdt2

* Enable secondary SPI flash chip

* Make it possible to get access to the primary SPI flash chip at CS0
  after booting from the alternate chip at CS1. A sysfs interface is added
  to provide an easy way for embedded firmware startup scripts to clear
  the chip select bit to gain access to the primary flash chip in order
  to allow for recovery of its contents.

Ivan Mikhaylov (3):
  vesnin: add wdt2 section with alt-boot option
  vesnin: add secondary SPI flash chip
  watchdog/aspeed: add support for dual boot

 arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts | 12 +++++++++
 drivers/watchdog/aspeed_wdt.c               | 30 +++++++++++++++++++++
 2 files changed, 42 insertions(+)

-- 
2.20.1



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2019-03-19 14:41 Maxim Levitsky
  2019-03-20 11:03 ` Felipe Franciosi
  0 siblings, 1 reply; 335+ messages in thread
From: Maxim Levitsky @ 2019-03-19 14:41 UTC (permalink / raw)


Date: Tue, 19 Mar 2019 14:45:45 +0200
Subject: [PATCH 0/9] RFC: NVME VFIO mediated device

Hi everyone!

In this patch series, I would like to introduce my take on the problem of doing 
as fast as possible virtualization of storage with emphasis on low latency.

In this patch series I implemented a kernel vfio based, mediated device that 
allows the user to pass through a partition and/or whole namespace to a guest.

The idea behind this driver is based on paper you can find at
https://www.usenix.org/conference/atc18/presentation/peng,

Although note that I stared the development prior to reading this paper, 
independently.

In addition to that implementation is not based on code used in the paper as 
I wasn't being able at that time to make the source available to me.

***Key points about the implementation:***

* Polling kernel thread is used. The polling is stopped after a 
predefined timeout (1/2 sec by default).
Support for all interrupt driven mode is planned, and it shows promising results.

* Guest sees a standard NVME device - this allows to run guest with 
unmodified drivers, for example windows guests.

* The NVMe device is shared between host and guest.
That means that even a single namespace can be split between host 
and guest based on different partitions.

* Simple configuration

*** Performance ***

Performance was tested on Intel DC P3700, With Xeon E5-2620 v2 
and both latency and throughput is very similar to SPDK.

Soon I will test this on a better server and nvme device and provide
more formal performance numbers.

Latency numbers:
~80ms - spdk with fio plugin on the host.
~84ms - nvme driver on the host
~87ms - mdev-nvme + nvme driver in the guest

Throughput was following similar pattern as well.

* Configuration example
  $ modprobe nvme mdev_queues=4
  $ modprobe nvme-mdev

  $ UUID=$(uuidgen)
  $ DEVICE='device pci address'
  $ echo $UUID > /sys/bus/pci/devices/$DEVICE/mdev_supported_types/nvme-2Q_V1/create
  $ echo n1p3 > /sys/bus/mdev/devices/$UUID/namespaces/add_namespace #attach host namespace 1 parition 3
  $ echo 11 > /sys/bus/mdev/devices/$UUID/settings/iothread_cpu #pin the io thread to cpu 11

  Afterward boot qemu with
  -device vfio-pci,sysfsdev=/sys/bus/mdev/devices/$UUID
  
  Zero configuration on the guest.
  
*** FAQ ***

* Why to make this in the kernel? Why this is better that SPDK

  -> Reuse the existing nvme kernel driver in the host. No new drivers in the guest.
  
  -> Share the NVMe device between host and guest. 
     Even in fully virtualized configurations,
     some partitions of nvme device could be used by guests as block devices 
     while others passed through with nvme-mdev to achieve balance between
     all features of full IO stack emulation and performance.
  
  -> NVME-MDEV is a bit faster due to the fact that in-kernel driver 
     can send interrupts to the guest directly without a context 
     switch that can be expensive due to meltdown mitigation.

  -> Is able to utilize interrupts to get reasonable performance. 
     This is only implemented
     as a proof of concept and not included in the patches, 
     but interrupt driven mode shows reasonable performance
     
  -> This is a framework that later can be used to support NVMe devices 
     with more of the IO virtualization built-in 
     (IOMMU with PASID support coupled with device that supports it)

* Why to attach directly to nvme-pci driver and not use block layer IO
  -> The direct attachment allows for better performance, but I will
     check the possibility of using block IO, especially for fabrics drivers.
  
*** Implementation notes ***

*  All guest memory is mapped into the physical nvme device 
   but not 1:1 as vfio-pci would do this.
   This allows very efficient DMA.
   To support this, patch 2 adds ability for a mdev device to listen on 
   guest's memory map events. 
   Any such memory is immediately pinned and then DMA mapped.
   (Support for fabric drivers where this is not possible exits too,
    in which case the fabric driver will do its own DMA mapping)

*  nvme core driver is modified to announce the appearance 
   and disappearance of nvme controllers and namespaces,
   to which the nvme-mdev driver is subscribed.
 
*  nvme-pci driver is modified to expose raw interface of attaching to 
   and sending/polling the IO queues.
   This allows the mdev driver very efficiently to submit/poll for the IO.
   By default one host queue is used per each mediated device.
   (support for other fabric based host drivers is planned)

* The nvme-mdev doesn't assume presence of KVM, thus any VFIO user, including
  SPDK, a qemu running with tccg, ... can use this virtual device.

*** Testing ***

The device was tested with stock QEMU 3.0 on the host,
with host was using 5.0 kernel with nvme-mdev added and the following hardware:
 * QEMU nvme virtual device (with nested guest)
 * Intel DC P3700 on Xeon E5-2620 v2 server
 * Samsung SM981 (in a Thunderbolt enclosure, with my laptop)
 * Lenovo NVME device found in my laptop

The guest was tested with kernel 4.16, 4.18, 4.20 and
the same custom complied kernel 5.0
Windows 10 guest was tested too with both Microsoft's inbox driver and
open source community NVME driver
(https://lists.openfabrics.org/pipermail/nvmewin/2016-December/001420.html)

Testing was mostly done on x86_64, but 32 bit host/guest combination
was lightly tested too.

In addition to that, the virtual device was tested with nested guest,
by passing the virtual device to it,
using pci passthrough, qemu userspace nvme driver, and spdk


PS: I used to contribute to the kernel as a hobby using the
    maximlevitsky at gmail.com address

Maxim Levitsky (9):
  vfio/mdev: add .request callback
  nvme/core: add some more values from the spec
  nvme/core: add NVME_CTRL_SUSPENDED controller state
  nvme/pci: use the NVME_CTRL_SUSPENDED state
  nvme/pci: add known admin effects to augument admin effects log page
  nvme/pci: init shadow doorbell after each reset
  nvme/core: add mdev interfaces
  nvme/core: add nvme-mdev core driver
  nvme/pci: implement the mdev external queue allocation interface

 MAINTAINERS                   |   5 +
 drivers/nvme/Kconfig          |   1 +
 drivers/nvme/Makefile         |   1 +
 drivers/nvme/host/core.c      | 149 +++++-
 drivers/nvme/host/nvme.h      |  55 ++-
 drivers/nvme/host/pci.c       | 385 ++++++++++++++-
 drivers/nvme/mdev/Kconfig     |  16 +
 drivers/nvme/mdev/Makefile    |   5 +
 drivers/nvme/mdev/adm.c       | 873 ++++++++++++++++++++++++++++++++++
 drivers/nvme/mdev/events.c    | 142 ++++++
 drivers/nvme/mdev/host.c      | 491 +++++++++++++++++++
 drivers/nvme/mdev/instance.c  | 802 +++++++++++++++++++++++++++++++
 drivers/nvme/mdev/io.c        | 563 ++++++++++++++++++++++
 drivers/nvme/mdev/irq.c       | 264 ++++++++++
 drivers/nvme/mdev/mdev.h      |  56 +++
 drivers/nvme/mdev/mmio.c      | 591 +++++++++++++++++++++++
 drivers/nvme/mdev/pci.c       | 247 ++++++++++
 drivers/nvme/mdev/priv.h      | 700 +++++++++++++++++++++++++++
 drivers/nvme/mdev/udata.c     | 390 +++++++++++++++
 drivers/nvme/mdev/vcq.c       | 207 ++++++++
 drivers/nvme/mdev/vctrl.c     | 514 ++++++++++++++++++++
 drivers/nvme/mdev/viommu.c    | 322 +++++++++++++
 drivers/nvme/mdev/vns.c       | 356 ++++++++++++++
 drivers/nvme/mdev/vsq.c       | 178 +++++++
 drivers/vfio/mdev/vfio_mdev.c |  11 +
 include/linux/mdev.h          |   4 +
 include/linux/nvme.h          |  88 +++-
 27 files changed, 7375 insertions(+), 41 deletions(-)
 create mode 100644 drivers/nvme/mdev/Kconfig
 create mode 100644 drivers/nvme/mdev/Makefile
 create mode 100644 drivers/nvme/mdev/adm.c
 create mode 100644 drivers/nvme/mdev/events.c
 create mode 100644 drivers/nvme/mdev/host.c
 create mode 100644 drivers/nvme/mdev/instance.c
 create mode 100644 drivers/nvme/mdev/io.c
 create mode 100644 drivers/nvme/mdev/irq.c
 create mode 100644 drivers/nvme/mdev/mdev.h
 create mode 100644 drivers/nvme/mdev/mmio.c
 create mode 100644 drivers/nvme/mdev/pci.c
 create mode 100644 drivers/nvme/mdev/priv.h
 create mode 100644 drivers/nvme/mdev/udata.c
 create mode 100644 drivers/nvme/mdev/vcq.c
 create mode 100644 drivers/nvme/mdev/vctrl.c
 create mode 100644 drivers/nvme/mdev/viommu.c
 create mode 100644 drivers/nvme/mdev/vns.c
 create mode 100644 drivers/nvme/mdev/vsq.c

-- 
2.17.2

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2019-03-16 11:17 Bharath Vedartham
  0 siblings, 0 replies; 335+ messages in thread
From: Bharath Vedartham @ 2019-03-16 11:17 UTC (permalink / raw)


linux-kernel at vger.kernel.org 
Bcc: 
Subject: [PATCH] staging: erofs: Add whitespace after declaration
Reply-To: 

Fix the checkpatch.pl warning to add a whitespace after declaration
statements.

Signed-off-by: Bharath Vedartham <linux.bhar at gmail.com>
---
 drivers/staging/erofs/inode.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/staging/erofs/inode.c b/drivers/staging/erofs/inode.c
index 924b8df..9a36a1f 100644
--- a/drivers/staging/erofs/inode.c
+++ b/drivers/staging/erofs/inode.c
@@ -270,8 +270,8 @@ struct inode *erofs_iget(struct super_block *sb,
 	if (inode->i_state & I_NEW) {
 		int err;
 		struct erofs_vnode *vi = EROFS_V(inode);
-		vi->nid = nid;
 
+		vi->nid = nid;
 		err = fill_inode(inode, isdir);
 		if (likely(!err))
 			unlock_new_inode(inode);
@@ -305,4 +305,3 @@ const struct inode_operations erofs_fast_symlink_iops = {
 #endif
 	.get_acl = erofs_get_acl,
 };
-
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 335+ messages in thread
* No subject
@ 2018-10-05 13:39 Christoph Hellwig
  0 siblings, 0 replies; 335+ messages in thread
From: Christoph Hellwig @ 2018-10-05 13:39 UTC (permalink / raw)


Bcc: 
Subject: [GIT PULL] nvme updates for 4.20
Reply-To: 

A relatively boring merge window:

 - better AEN tracing (Chaitanya)
 - NUMA aware PCIe multipathing (me)
 - RDMA workqueue fixes (Sagi)
 - better bio usage in the target (Sagi)
 - FC rework for target removal (James)
 - better multipath handling of ->queue_rq failures (James)
 - various cleanups (Milan)

The following changes since commit c0aac682fa6590cb660cb083dbc09f55e799d2d2:

  Merge tag 'v4.19-rc6' into for-4.20/block (2018-10-01 08:58:57 -0600)

are available in the Git repository at:

  git://git.infradead.org/nvme.git nvme-4.20

for you to fetch changes up to 2acf70ade79d26b97611a8df52eb22aa33814cd4:

  nvmet-rdma: use a private workqueue for delete (2018-10-05 09:25:18 +0200)

----------------------------------------------------------------
Chaitanya Kulkarni (2):
      nvmet: remove redundant module prefix
      nvme-core: add async event trace helper

Christoph Hellwig (1):
      nvme: take node locality into account when selecting a path

James Smart (3):
      nvmet_fc: support target port removal with nvmet layer
      nvme_fc: add 'nvme_discovery' sysfs attribute to fc transport device
      nvme: call nvme_complete_rq when nvmf_check_ready fails for mpath I/O

Milan P. Gandhi (2):
      nvme: fix typo in nvme_identify_ns_descs
      nvme-fc: fix for a minor typos

Sagi Grimberg (2):
      nvmet: don't split large I/Os unconditionally
      nvmet-rdma: use a private workqueue for delete

 drivers/nvme/host/core.c          |  20 ++++--
 drivers/nvme/host/fabrics.c       |   7 +-
 drivers/nvme/host/fc.c            | 108 +++++++++++++++++++++++++++----
 drivers/nvme/host/multipath.c     |  57 +++++++++++++----
 drivers/nvme/host/nvme.h          |  25 +++-----
 drivers/nvme/host/trace.h         |  28 ++++++++
 drivers/nvme/target/admin-cmd.c   |   2 +-
 drivers/nvme/target/fc.c          | 130 +++++++++++++++++++++++++++++++++++---
 drivers/nvme/target/io-cmd-bdev.c |   9 ++-
 drivers/nvme/target/nvmet.h       |   1 +
 drivers/nvme/target/rdma.c        |  19 ++++--
 include/linux/nvme.h              |   1 +
 12 files changed, 347 insertions(+), 60 deletions(-)

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2018-08-02 10:48 TU PHUNG VAN
  0 siblings, 0 replies; 335+ messages in thread
From: TU PHUNG VAN @ 2018-08-02 10:48 UTC (permalink / raw)
  To: kernelnewbies

S.?
www
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20180802/20565816/attachment.html>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2018-07-06 21:16 Santosh Shilimkar
  2018-07-06 21:16 ` Santosh Shilimkar
  2018-07-06 21:16 ` Santosh Shilimkar
  0 siblings, 2 replies; 335+ messages in thread
From: Santosh Shilimkar @ 2018-07-06 21:16 UTC (permalink / raw)
  To: linux-arm-kernel

Subject: [GIT PULL 1/3] ARM: Keystone DTS update for v4.19

The following changes since commit ce397d215ccd07b8ae3f71db689aedb85d56ab40:

  Linux 4.18-rc1 (2018-06-17 08:04:49 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git tags/keystone_dts_for_4.19

for you to fetch changes up to f7e8a182a41e791cca3d7a9e25adddf2908bddde:

  ARM: dts: keystone-k2g-evm: Use sdhci-omap programming model (2018-06-29 15:57:27 -0700)

----------------------------------------------------------------
ARM: Keystone DTS updates for 4.19

 - K2G NIC drriver support
 - Enbale network support for K2G ICE and EVM boards
 - Hardware Ring driver support for k2hk, k2l and k2e socs
 - Add MMC supply for k2g EVM

----------------------------------------------------------------
Kishon Vijay Abraham I (2):
      ARM: dts: keystone-k2g-evm: Add "vqmmc-supply" property for mmc0/mmc1
      ARM: dts: keystone-k2g-evm: Use sdhci-omap programming model

Murali Karicheri (3):
      ARM: dts: k2g: add dt bindings to support network driver
      ARM: dts: keystone-k2g-evm: Enable netcp network driver
      ARM: dts: keystone-k2g-ice: Enable netcp network driver

Vitaly Andrianov (3):
      ARM: dts: k2hk: add dts node for k2hk hw_rng driver
      ARM: dts: k2l: add dts node for k2l hw_rng driver
      ARM: dts: k2e: add dts node for k2e hw_rng driver

 arch/arm/boot/dts/keystone-k2e-netcp.dtsi  |  20 ++++
 arch/arm/boot/dts/keystone-k2g-evm.dts     |  63 +++++++++++++
 arch/arm/boot/dts/keystone-k2g-ice.dts     |  59 ++++++++++++
 arch/arm/boot/dts/keystone-k2g-netcp.dtsi  | 147 +++++++++++++++++++++++++++++
 arch/arm/boot/dts/keystone-k2g.dtsi        |  25 +++--
 arch/arm/boot/dts/keystone-k2hk-netcp.dtsi |  20 ++++
 arch/arm/boot/dts/keystone-k2l-netcp.dtsi  |  20 ++++
 7 files changed, 346 insertions(+), 8 deletions(-)
 create mode 100644 arch/arm/boot/dts/keystone-k2g-netcp.dtsi

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2018-07-06  5:52 inventsekar
  0 siblings, 0 replies; 335+ messages in thread
From: inventsekar @ 2018-07-06  5:52 UTC (permalink / raw)
  To: kernelnewbies

Dear All,....

so I was reading on Quora....
https://www.quora.com/What-are-some-features-that-Linus-Torvalds-dismissed-from-the-Linux-kernel

Signing Linux kernel with Microsoft secure boot keys for UEFI. That was
suggested by RedHat developers and Linus flipped them off in his
character...
I went to that link and read two three times, but I could not understand.


Could you explain this above issue, on a newbies perspective.


Best regards, sekar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20180706/6727e55a/attachment-0001.html>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2018-06-23 21:08 David Lechner
  0 siblings, 0 replies; 335+ messages in thread
From: David Lechner @ 2018-06-23 21:08 UTC (permalink / raw)
  To: linux-arm-kernel


Date: Sat, 23 Jun 2018 15:43:59 -0500
Subject: [PATCH 0/8] New remoteproc driver for TI PRU

This series adds a new remoteproc driver for the TI Programmable Runtime Unit
(PRU) that is present in some TI Sitara processors. This code has been tested
working on AM1808 (LEGO MINDSTORMS EV3) and AM3358 (BeagleBone Green).

There are a couple of quirks that had to be worked around in order to get this
working. The PRU units have multiple memory maps. Notably, both the instruction
RAM and data RAM are at address 0x0. This caused the da_to_va callback to not
work because the same address could refer to two different locations. To work
around this, the first two patches add a "map" parameter to the da_to_va
callbacks so that we have an extra bit of information to make this distinction.

Also, on AM38xx we have to use pdata for accessing a reset since there is not
a reset controller. There are several other devices doing this, so the seems
the best way for now.

For anyone else who would like to test, I used the rpmsg-client-sample driver.
Just enable it in your kernel config. Then grab the appropriate firmware[1]
and put in in /lib/firmware/. Use sysfs to start and stop the PRU:

        echo start > /sys/class/remoteproc<n>/state
        echo stop > /sys/class/remoteproc<n>/state

[1]: firmware downloads:

AM18XX: https://github.com/ev3dev/ev3dev-pru-firmware/releases/download/mainline-kernel-testing/AM18xx-PRU-rpmsg-client-sample.zip
AM335X: https://github.com/ev3dev/ev3dev-pru-firmware/releases/download/mainline-kernel-testing/AM335x-PRU-rpmsg-client-sample.zip

David Lechner (8):
  remoteproc: add map parameter to da_to_va
  remoteproc: add page lookup for TI PRU to ELF loader
  ARM: OMAP2+: add pdata quirks for PRUSS reset
  dt-bindings: add bindings for TI PRU as remoteproc
  remoteproc: new driver for TI PRU
  ARM: davinci_all_defconfig: enable PRU remoteproc module
  ARM: dts: da850: add node for PRUSS
  ARM: dts: am33xx: add node for PRU remoteproc

 .../bindings/remoteproc/ti_pru_rproc.txt      |  51 ++
 MAINTAINERS                                   |   5 +
 arch/arm/boot/dts/am33xx.dtsi                 |   9 +
 arch/arm/boot/dts/da850.dtsi                  |   8 +
 arch/arm/configs/davinci_all_defconfig        |   2 +
 arch/arm/mach-omap2/pdata-quirks.c            |   9 +
 drivers/remoteproc/Kconfig                    |   7 +
 drivers/remoteproc/Makefile                   |   1 +
 drivers/remoteproc/imx_rproc.c                |   2 +-
 drivers/remoteproc/keystone_remoteproc.c      |   3 +-
 drivers/remoteproc/qcom_adsp_pil.c            |   2 +-
 drivers/remoteproc/qcom_q6v5_pil.c            |   2 +-
 drivers/remoteproc/qcom_wcnss.c               |   2 +-
 drivers/remoteproc/remoteproc_core.c          |  10 +-
 drivers/remoteproc/remoteproc_elf_loader.c    | 117 +++-
 drivers/remoteproc/remoteproc_internal.h      |   2 +-
 drivers/remoteproc/st_slim_rproc.c            |   2 +-
 drivers/remoteproc/ti_pru_rproc.c             | 660 ++++++++++++++++++
 drivers/remoteproc/wkup_m3_rproc.c            |   3 +-
 include/linux/platform_data/ti-pruss.h        |  18 +
 include/linux/remoteproc.h                    |   2 +-
 include/uapi/linux/elf-em.h                   |   1 +
 22 files changed, 899 insertions(+), 19 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/ti_pru_rproc.txt
 create mode 100644 drivers/remoteproc/ti_pru_rproc.c
 create mode 100644 include/linux/platform_data/ti-pruss.h

-- 
2.17.1

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2018-05-08  6:10 Vishnu Gopinath
  0 siblings, 0 replies; 335+ messages in thread
From: Vishnu Gopinath @ 2018-05-08  6:10 UTC (permalink / raw)
  To: kernelnewbies

new in the field of linux kernal... how to start..from where to start
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20180508/10f1e928/attachment.html>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2018-05-04 20:06 Bjorn Helgaas
  0 siblings, 0 replies; 335+ messages in thread
From: Bjorn Helgaas @ 2018-05-04 20:06 UTC (permalink / raw)
  To: linux-arm-kernel

Bcc: 
Subject: Re: [PATCH] PCI: Check whether bridges allow access to extended
 config space
Reply-To: 
In-Reply-To: <5AEC8002.5000309@kontron.com>

[+cc Fred, Sinan]

On Fri, May 04, 2018 at 03:45:07PM +0000, Gilles Buloz wrote:
> Le 04/05/2018 00:31, Bjorn Helgaas a ?crit :
> > [+cc LKML]
> >
> > On Thu, May 03, 2018 at 12:40:27PM +0000, Gilles Buloz wrote:
> >> Subject:    [PATCH] For exception at PCI probe due to bridge reporting UR
> >>
> >> Even if a device supports extended config access, no such access must be
> >> done to this device If there's a bridge not supporting that in the path
> >> to this device. Doing such access with UR reporting enabled on the root
> >> bridge leads to an exception.
> >>
> >> This is the case on a LS1043A CPU (NXP QorIQ Layerscape) platform with
> >> the following bus topology :
> >>    LS1043 PCIe root
> >>      -> PEX8112 PCIe-to-PCI bridge (not supporting ext cfg on PCI side)
> >>        -> PMC slot connector (for legacy PMC modules)
> >> With a PMC module topology as follows :
> >>    PMC connector
> >>      -> PCI-to-PCIe bridge
> >>        -> PCIe switch (4 ports)
> >>          -> 4 PCIe devices (one on each port)
> >> In this case all devices behind the PEX8112 are supporting extended config
> >> access but this is prohibited by the PEX8112. Without this patch, an
> >> exception (synchronous abort) occurs in pci_cfg_space_size_ext().
> >>
> >> This patch checks the parent bridge of each allocated child bus to know if
> >> extended config access is supported on the child bus, and sets a flag in
> >> child->bus_flags if not supported. This  flag is inherited by all children
> >> buses of this child bus and then is checked to avoid this unsupported
> >> accesses to every device on these buses.
> > Hi Gilles,
> >
> > Thanks for the patch!  I reworked it a little bit to simplify the code
> > in pci_alloc_child_bus().  Can you test it and make sure I didn't
> > break anything?
> >
> Hi Bjorn,
> 
> Your rework works as expected. Tested on LS1043A platform with kernel 4.17-rc1, and with some backport on kernel 4.1.35
> 
> Suggestion : maybe change the pci_info() string to have :
>      pci_bus 0000:xx: extended config space not accessible
> instead of
>      pci_bus 0000:xx: extended config space not accessible on secondary bus
> as xx is already the number of the secondary bus

Oops, when I wrote that I was thinking it would be printed for the
bridge device (not the bus).  I changed it as you suggest.

Interesting, I didn't think about the fact that pci_info() would work
on a struct pci_bus * as well as on a struct pci_dev *, since it's a
macro and they both have a "dev" member.

> Info : with kernel 4.17-rc1, it turns out I need pcie_aspm=off to
> have the PMC devices behind the PCI-to-PCIe bridge of the PMC safely
> detected/configured. But this is not caused by the patch.

> Without pcie_aspm=off I saw this at one boot :
>     "pci 0000:02:0e.0: ASPM: Could not configure common clock" for this bridge, but devices
>     correctly detected/configured
> but at most boots I get :
>     no ASPM message but "pci 0000:04:02.0: bridge configuration invalid ([bus ff-ff]), reconfiguring "
>     instead, and some devices are missing. Also lspci show "rev ff" for some devices.
> I don't see this problem on 4.1.35 with the same backported patch.

This is interesting, especially since you have this unusual topology
of a path to the device that is PCIe, then conventional PCI, then PCIe
again.  We *should* be able to use ASPM on the PCIe links, but it's
definitely not a well-tested scenario.

Can you tell if something is actually broken?  Sinan's recent change,
04875177dbe0 ("PCI/ASPM: Don't warn if already in common clock mode"),
which appeared in v4.17-rc1, turns off the message in some cases.

The "bridge configuration invalid" message just means the firmware
didn't configure the bridge.  We *should* still set it up correctly,
but please report a bug if we don't.

lspci showing "ff" for some devices might be a symptom of the devices
being powered off.  In that case config reads normally return ~0 data
(though on your platform maybe it would cause exceptions).  I've seen
this in other situations and wondered if it would be worth adding a
hint to lspci so it could say "device may be powered off".

Anyway, if you are seeing something broken (more than just the
messages), please start a new thread about each one.  If you do, could
you please:

  - open a report at https://bugzilla.kernel.org/, in the Drivers/PCI
    component (open a separate bug for each issue you see)

  - use kernel version 4.17-rc1 and mark it as a regression if
    appropriate

  - attach (don't paste inline) the complete dmesg log and "lspci -vv"
    output (as root) to the bug

  - post a note to linux-pci at vger.kernel.org, cc Fred, Sinan, and me,
    and include the link to the bugzilla

Bjorn

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2018-04-20  8:02 ` Christoph Hellwig
  0 siblings, 0 replies; 335+ messages in thread
From: Christoph Hellwig @ 2018-04-20  8:02 UTC (permalink / raw)
  To: linux-snps-arc

To: iommu at lists.linux-foundation.org
Cc: linux-arch at vger.kernel.org
Cc: Michal Simek <monstr at monstr.eu>
Cc: Greentime Hu <green.hu at gmail.com>
Cc: Vincent Chen <deanbo422 at gmail.com>
Cc: linux-alpha at vger.kernel.org
Cc: linux-snps-arc at lists.infradead.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-c6x-dev at linux-c6x.org
Cc: linux-hexagon at vger.kernel.org
Cc: linux-m68k at lists.linux-m68k.org
Cc: nios2-dev at lists.rocketboards.org
Cc: openrisc at lists.librecores.org
Cc: linux-parisc at vger.kernel.org
Cc: linux-sh at vger.kernel.org
Cc: sparclinux at vger.kernel.org
Cc: linux-xtensa at linux-xtensa.org
Cc: linux-kernel at vger.kernel.org
Subject: [RFC] common non-cache coherent direct dma mapping ops

Hi all,

this series continues consolidating the dma-mapping code, with a focus
on architectures that do not (always) provide cache coherence for DMA.
Three architectures (arm, mips and powerpc) are still left to be
converted later due to complexity of their dma ops selection.

The dma-noncoherent ops calls the dma-direct ops for the actual
translation of streaming mappins and allow the architecture to provide
any cache flushing required for cpu to device and/or device to cpu
ownership transfers.  The dma coherent allocator is for now still left
entirely to architecture supplied implementations due the amount of
variations.  Hopefully we can do some consolidation for them later on
as well.

A lot of architectures are currently doing very questionable things
in their dma mapping routines, which are documented in the changelogs
for each patch.  Please review them very careful and correct me on
incorrect assumptions.

Because this series sits on top of two previously submitted series
a git tree might be useful to actually test it.  It is provided here:

    git://git.infradead.org/users/hch/misc.git generic-dma-noncoherent

Gitweb:

    http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/generic-dma-noncoherent

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2018-04-16  1:22 Andrew Worsley
  0 siblings, 0 replies; 335+ messages in thread
From: Andrew Worsley @ 2018-04-16  1:22 UTC (permalink / raw)
  To: linux-arm-kernel


  This patch clears the remaining i2c buffer overrun problems that I see in my
hardware.  When run at 200kHz over 2 days and 17 hours there were *NO* faults seen
despite continously accessing the all the i2c devices. I feel the remaining issues
are related to the TPM not behaving properly at clock speeds of 285kHz or higher.
The other i2c hardware is fine up to maximum 400khz.  At these higher clock speeds
the TPM appears to fall behind and I see SDA held low after the TPM read and the
driver report bus arbitration lost errors.  Eventually the TPM completely stops
responding and SDA is held low. But accessing the other i2c hardware causes more
i2c clock pulses which lets the SDA go high again then the other i2c devices work
with out problems which further confirms our thinking that the TPM is source of the
remaining i2c problems.

  With the additional i2c fixes in the attached patch the Xilinx i2c driver
is working with out problems on our hardware. I recommend you consider adding these
changes which apply on top of the previous fixes that I sent.

  Thanks

        Andrew Worsley

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2018-02-25  0:39 J Freyensee
  0 siblings, 0 replies; 335+ messages in thread
From: J Freyensee @ 2018-02-25  0:39 UTC (permalink / raw)
  To: linux-security-module

        auth fc300131 subscribe linux-security-module \
         why2jjj.linux at gmail.com

--
To unsubscribe from this list: send the line "unsubscribe linux-security-module" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2018-02-02  6:54 Jianchao Wang
  0 siblings, 0 replies; 335+ messages in thread
From: Jianchao Wang @ 2018-02-02  6:54 UTC (permalink / raw)


Hi Christoph, Keith and Sagi

Please consider and comment on the following patchset.
That's really appreciated.

There is a complicated relationship between nvme_timeout and nvme_dev_disable.
 - nvme_timeout has to invoke nvme_dev_disable to stop the
   controller doing DMA access before free the request.
 - nvme_dev_disable has to depend on nvme_timeout to complete
   adminq requests to set HMB or delete sq/cq when the controller
   has no response.
 - nvme_dev_disable will race with nvme_timeout when cancels the
   outstanding requests.
We have found some issues introduced by them, please refer the following link

http://lists.infradead.org/pipermail/linux-nvme/2018-January/015053.html 
http://lists.infradead.org/pipermail/linux-nvme/2018-January/015276.html
http://lists.infradead.org/pipermail/linux-nvme/2018-January/015328.html
Even we cannot ensure there is no other issue.

The best way to fix them is to break up the relationship between them.
With this patch, we could avoid nvme_dev_disable to be invoked
by nvme_timeout and eliminate the race between nvme_timeout and
nvme_dev_disable on outstanding requests.


There are 6 patches:

1st ~ 3th patches does some preparation for the 4th one.
4th is to avoid nvme_dev_disable to be invoked by nvme_timeout, and implement
the synchronization between them. More details, please refer to the comment of
this patch.
5th fixes a bug after 4th patch is introduced. It let nvme_delete_io_queues can
only be wakeup by completion path.
6th fixes a bug found when test, it is not related with 4th patch.

This patchset was tested under debug patch for some days.
And some bugfix have been done.
The debug patch and other patches are available in following it branch:
https://github.com/jianchwa/linux-blcok.git nvme_fixes_test

Jianchao Wang (6)
0001-nvme-pci-move-clearing-host-mem-behind-stopping-queu.patch
0002-nvme-pci-fix-the-freeze-and-quiesce-for-shutdown-and.patch
0003-blk-mq-make-blk_mq_rq_update_aborted_gstate-a-extern.patch
0004-nvme-pci-break-up-nvme_timeout-and-nvme_dev_disable.patch
0005-nvme-pci-discard-wait-timeout-when-delete-cq-sq.patch
0006-nvme-pci-suspend-queues-based-on-online_queues.patch

diff stat following:
 block/blk-mq.c          |   3 +-
 drivers/nvme/host/pci.c | 225 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------
 include/linux/blk-mq.h  |   1 +
 3 files changed, 169 insertions(+), 60 deletions(-)

Thanks
Jianchao

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2017-11-30 10:25 Mary Cuevas
  0 siblings, 0 replies; 335+ messages in thread
From: Mary Cuevas @ 2017-11-30 10:25 UTC (permalink / raw)
  To: linux-arm-kernel


Open
Sent from my iPhone

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2017-09-13 18:15 unmesh rathi
  0 siblings, 0 replies; 335+ messages in thread
From: unmesh rathi @ 2017-09-13 18:15 UTC (permalink / raw)




^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2017-08-22  1:38 Nicholas Piggin
  0 siblings, 0 replies; 335+ messages in thread
From: Nicholas Piggin @ 2017-08-22  1:38 UTC (permalink / raw)
  To: linux-arm-kernel

Date: Sun, 20 Aug 2017 13:16:16 +1000
Subject: [PATCH] timers: Fix excessive granularity of new timers after a nohz
 idle

When a timer base is idle, it is forwarded when a new timer is added
to ensure that granularity does not become excessive. When not idle,
the timer tick is expected to increment the base.

However there are several problems:

- If an existing timer is modified, the base is forwarded only after
  the index is calculated.

- The base is not forwarded by add_timer_on.

- There is a window after a timer is restarted from a nohz ide, after
  it is marked not-idle and before the timer tick on this CPU, where a
  timer may be added but the ancient base does not get forwarded.

These result in excessive granularity (a 1 jiffy timeout can blow out
to 100s of jiffies), which cause the rcu lockup detector to trigger,
among other things.

Fix this by keeping track of whether the timer base has been idle
since it was last run or forwarded, and if so then forward it before
adding a new timer.

There is still a problem where the mod_timer optimization where it's
modified with the same expiry time can result in excessive granularity
relative to the new shorter interval. That is not addressed by this
patch because checking base->was_idle would increase overhead and it's
a rather special case (you could reason that the caller should not
expect change in absolute expiry time due to such an operation). So
that is noted as a comment.

As well as fixing the visible RCU softlockup failures, I tested an
idle system (with no lockup watchdogs running) and traced all
non-deferrable timer expiries for 1000s, and analysed wakeup latency
relative to requested latency.  1.0 means we slept for as many jiffies
as requested, 2.0 means we slept 2x the time (this suffers jiffies
round-up skew at low absolute times):

             max     avg      std
upstream   506.0    1.20     4.68
patched      2.0    1.08     0.15

This was noticed due to the lockup detector Kconfig changes dropping it
out of people's .configs. When the lockup detectors are enabled, no CPU
can go idle for longer than 4 seconds, which limits the granularity
errors. Sub-optimal timer behaviour is observable on a smaller scale:

             max     avg      std
upstream     9.0    1.05     0.19
patched      2.0    1.04     0.11

Tested-by: David Miller <davem@davemloft.net>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---

Hi Andrew,

I would have preferred to get comments from the timer maintainers, but
they've been busy or away for the past copule of weeks. Perhaps you
would consider carrying it until then?

Thanks,
Nick

 kernel/time/timer.c | 44 ++++++++++++++++++++++++++++++++++++--------
 1 file changed, 36 insertions(+), 8 deletions(-)

diff --git a/kernel/time/timer.c b/kernel/time/timer.c
index 8f5d1bf18854..dd7be9fe6839 100644
--- a/kernel/time/timer.c
+++ b/kernel/time/timer.c
@@ -203,6 +203,7 @@ struct timer_base {
 	bool			migration_enabled;
 	bool			nohz_active;
 	bool			is_idle;
+	bool			was_idle; /* was it idle since last run/fwded */
 	DECLARE_BITMAP(pending_map, WHEEL_SIZE);
 	struct hlist_head	vectors[WHEEL_SIZE];
 } ____cacheline_aligned;
@@ -856,13 +857,19 @@ get_target_base(struct timer_base *base, unsigned tflags)
 
 static inline void forward_timer_base(struct timer_base *base)
 {
-	unsigned long jnow = READ_ONCE(jiffies);
+	unsigned long jnow;
 
 	/*
-	 * We only forward the base when it's idle and we have a delta between
-	 * base clock and jiffies.
+	 * We only forward the base when we are idle or have just come out
+	 * of idle (was_idle logic), and have a delta between base clock
+	 * and jiffies. In the common case, run_timers will take care of it.
 	 */
-	if (!base->is_idle || (long) (jnow - base->clk) < 2)
+	if (likely(!base->was_idle))
+		return;
+
+	jnow = READ_ONCE(jiffies);
+	base->was_idle = base->is_idle;
+	if ((long)(jnow - base->clk) < 2)
 		return;
 
 	/*
@@ -938,6 +945,13 @@ __mod_timer(struct timer_list *timer, unsigned long expires, bool pending_only)
 	 * same array bucket then just return:
 	 */
 	if (timer_pending(timer)) {
+		/*
+		 * The downside of this optimization is that it can result in
+		 * larger granularity than you would get from adding a new
+		 * timer with this expiry. Would a timer flag for networking
+		 * be appropriate, then we can try to keep expiry of general
+		 * timers within ~1/8th of their interval?
+		 */
 		if (timer->expires == expires)
 			return 1;
 
@@ -948,6 +962,7 @@ __mod_timer(struct timer_list *timer, unsigned long expires, bool pending_only)
 		 * dequeue/enqueue dance.
 		 */
 		base = lock_timer_base(timer, &flags);
+		forward_timer_base(base);
 
 		clk = base->clk;
 		idx = calc_wheel_index(expires, clk);
@@ -964,6 +979,7 @@ __mod_timer(struct timer_list *timer, unsigned long expires, bool pending_only)
 		}
 	} else {
 		base = lock_timer_base(timer, &flags);
+		forward_timer_base(base);
 	}
 
 	ret = detach_if_pending(timer, base, false);
@@ -991,12 +1007,10 @@ __mod_timer(struct timer_list *timer, unsigned long expires, bool pending_only)
 			raw_spin_lock(&base->lock);
 			WRITE_ONCE(timer->flags,
 				   (timer->flags & ~TIMER_BASEMASK) | base->cpu);
+			forward_timer_base(base);
 		}
 	}
 
-	/* Try to forward a stale timer base clock */
-	forward_timer_base(base);
-
 	timer->expires = expires;
 	/*
 	 * If 'idx' was calculated above and the base time did not advance
@@ -1112,6 +1126,7 @@ void add_timer_on(struct timer_list *timer, int cpu)
 		WRITE_ONCE(timer->flags,
 			   (timer->flags & ~TIMER_BASEMASK) | cpu);
 	}
+	forward_timer_base(base);
 
 	debug_activate(timer, timer->expires);
 	internal_add_timer(base, timer);
@@ -1499,8 +1514,10 @@ u64 get_next_timer_interrupt(unsigned long basej, u64 basem)
 		/*
 		 * If we expect to sleep more than a tick, mark the base idle:
 		 */
-		if ((expires - basem) > TICK_NSEC)
+		if ((expires - basem) > TICK_NSEC) {
+			base->was_idle = true;
 			base->is_idle = true;
+		}
 	}
 	raw_spin_unlock(&base->lock);
 
@@ -1611,6 +1628,17 @@ static __latent_entropy void run_timer_softirq(struct softirq_action *h)
 {
 	struct timer_base *base = this_cpu_ptr(&timer_bases[BASE_STD]);
 
+	/*
+	 * was_idle must be cleared before running timers so that any timer
+	 * functions that call mod_timer will not try to forward the base.
+	 *
+	 * The deferrable base does not do idle tracking at all, so we do
+	 * not forward it. This can result in very large variations in
+	 * granularity for deferrable timers, but they can be deferred for
+	 * long periods due to idle.
+	 */
+	base->was_idle = false;
+
 	__run_timers(base);
 	if (IS_ENABLED(CONFIG_NO_HZ_COMMON) && base->nohz_active)
 		__run_timers(this_cpu_ptr(&timer_bases[BASE_DEF]));
-- 
2.13.3

^ permalink raw reply related	[flat|nested] 335+ messages in thread
* [PATCH] arm64: use readq() instead of readl() to read 64bit entry_point
@ 2017-06-26 13:16 Luc Van Oostenryck
  2017-07-03 23:46 ` No subject Khuong Dinh
  0 siblings, 1 reply; 335+ messages in thread
From: Luc Van Oostenryck @ 2017-06-26 13:16 UTC (permalink / raw)
  To: linux-arm-kernel

Here the entrypoint, declared as a 64 bit integer, is read from
a pointer to 64bit integer but the read is done via readl_relaxed()
which is for 32bit quantities.

All the high bits will thus be lost which change the meaning
of the test against zero done later.

Fix this by using readq_relaxed() instead as it should be for
64bit quantities.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>

---

!!! Warning !!!
   I don't have the HW to test this, nor have I read the ACPI specs.
   This is only compile tested.
---
 arch/arm64/kernel/acpi_parking_protocol.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/acpi_parking_protocol.c b/arch/arm64/kernel/acpi_parking_protocol.c
index 1f5655cd9..f35e80aad 100644
--- a/arch/arm64/kernel/acpi_parking_protocol.c
+++ b/arch/arm64/kernel/acpi_parking_protocol.c
@@ -125,7 +125,7 @@ static void acpi_parking_protocol_cpu_postboot(void)
 	struct parking_protocol_mailbox __iomem *mailbox = cpu_entry->mailbox;
 	__le64 entry_point;
 
-	entry_point = readl_relaxed(&mailbox->entry_point);
+	entry_point = readq_relaxed(&mailbox->entry_point);
 	/*
 	 * Check if firmware has cleared the entry_point as expected
 	 * by the protocol specification.
-- 
2.13.0

^ permalink raw reply related	[flat|nested] 335+ messages in thread
* No subject
@ 2017-06-06  7:19 From Lori J. Robinson
  0 siblings, 0 replies; 335+ messages in thread
From: From Lori J. Robinson @ 2017-06-06  7:19 UTC (permalink / raw)
  To: linux-security-module

Hello,

I am General Lori J. Robinson, I am presently in Afghanistan serving
the UN/NATO military assignment here,i have an important discussion
with you  kindly respond to me through my private  box
lori_robinson.usa at hotmail.com  so that we can know ourselves better. I
hope to read from you if your are also interested. Thanks and hoping
to hear from you soonest.
--
To unsubscribe from this list: send the line "unsubscribe linux-security-module" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2017-06-04 11:59 Yury Norov
  0 siblings, 0 replies; 335+ messages in thread
From: Yury Norov @ 2017-06-04 11:59 UTC (permalink / raw)
  To: linux-arm-kernel

Subject: [PATCH v7 resend 2 00/20] ILP32 for ARM64

Hi Catalin,
 
Here is a rebase of latest kernel patchset against next-20170602. There's almost
no changes, but there are some conflicts that are not trivial, and I'd like to
refresh the submission therefore.

How are your experiments with testing and benchmarking of ILP32 are going? In
my current tests I see 0 failures on LTP. Benchmarking on SPEC CPU2006 and
LMBench shows no difference for LP64 and expected performance boost for ILP32
(compared to LP64 results).

Steve Ellcey is handling upstream submission of Glibc patches. The patches are
ready and have been reviewed and reworked per community?s comments. There are
no outstanding userspace ABI issues from Glibc. Glibc submission is now waiting
on ILP32 kernel submission.

Catalin, regarding rootfs, is OpenSuSe?s build sufficient for your experiments?
I?ve also seen Wookey merging patches for ILP32 triplet to binutils and pushing
them to Debian.

One last thing I wanted to check with you about is ILP32 PCS - does, in your
view, ARM Ltd. needs to publish any additional docs for ABI to become official?

Below is the regular description.

Thanks.
Yury

--------

This series enables aarch64 with ilp32 mode.

As supporting work, it introduces ARCH_32BIT_OFF_T configuration
option that is enabled for existing 32-bit architectures but disabled
for new arches (so 64-bit off_t is is used by new userspace). Also it
deprecates getrlimit and setrlimit syscalls prior to prlimit64.

This version is based on linux-next from 2017-03-01. It works with
glibc-2.25, and tested with LTP, glibc testsuite, trinity, lmbench,
CPUSpec.

Patches 1, 2, 3 and 8 are general, and may be applied separately.

This is the rebase of v7 - still no major changes has been made.

Kernel and GLIBC trees:
https://github.com/norov/linux/tree/ilp32-20170602
https://github.com/norov/glibc/tree/dev9

(GLIBC patches are managed by Steve Ellcey, so my tree is only for
reference.)

Changes:
v3: https://lkml.org/lkml/2014/9/3/704
v4: https://lkml.org/lkml/2015/4/13/691
v5: https://lkml.org/lkml/2015/9/29/911
v6: https://lkml.org/lkml/2016/5/23/661
v7: RFC nowrap:  https://lkml.org/lkml/2016/6/17/990
v7: RFC2 nowrap: https://lkml.org/lkml/2016/8/17/245
v7: RFC3 nowrap: https://lkml.org/lkml/2016/10/21/883
v7: https://lkml.org/lkml/2017/1/9/213
v7: Resend: http://lists.infradead.org/pipermail/linux-arm-kernel/2017-March/490801.html
v7: Resend 2:
    - vdso-ilp32 Makefile synced with lp64 Makefile (patch 19);
    - rebased on next-20170602.

Andrew Pinski (6):
  arm64: rename COMPAT to AARCH32_EL0 in Kconfig
  arm64: ensure the kernel is compiled for LP64
  arm64:uapi: set __BITS_PER_LONG correctly for ILP32 and LP64
  arm64: ilp32: add sys_ilp32.c and a separate table (in entry.S) to use
    it
  arm64: ilp32: introduce ilp32-specific handlers for sigframe and
    ucontext
  arm64:ilp32: add ARM64_ILP32 to Kconfig

Philipp Tomsich (1):
  arm64:ilp32: add vdso-ilp32 and use for signal return

Yury Norov (13):
  compat ABI: use non-compat openat and open_by_handle_at variants
  32-bit ABI: introduce ARCH_32BIT_OFF_T config option
  asm-generic: Drop getrlimit and setrlimit syscalls from default list
  arm64: ilp32: add documentation on the ILP32 ABI for ARM64
  thread: move thread bits accessors to separated file
  arm64: introduce is_a32_task and is_a32_thread (for AArch32 compat)
  arm64: ilp32: add is_ilp32_compat_{task,thread} and TIF_32BIT_AARCH64
  arm64: introduce binfmt_elf32.c
  arm64: ilp32: introduce binfmt_ilp32.c
  arm64: ilp32: share aarch32 syscall handlers
  arm64: signal: share lp64 signal routines to ilp32
  arm64: signal32: move ilp32 and aarch32 common code to separated file
  arm64: ptrace: handle ptrace_request differently for aarch32 and ilp32

 Documentation/arm64/ilp32.txt                 |  45 +++++++
 arch/Kconfig                                  |   4 +
 arch/arc/Kconfig                              |   1 +
 arch/arc/include/uapi/asm/unistd.h            |   1 +
 arch/arm/Kconfig                              |   1 +
 arch/arm64/Kconfig                            |  19 ++-
 arch/arm64/Makefile                           |   8 ++
 arch/arm64/include/asm/compat.h               |  19 +--
 arch/arm64/include/asm/elf.h                  |  37 ++----
 arch/arm64/include/asm/fpsimd.h               |   2 +-
 arch/arm64/include/asm/ftrace.h               |   2 +-
 arch/arm64/include/asm/hwcap.h                |   6 +-
 arch/arm64/include/asm/is_compat.h            |  90 ++++++++++++++
 arch/arm64/include/asm/memory.h               |   5 +-
 arch/arm64/include/asm/processor.h            |  11 +-
 arch/arm64/include/asm/ptrace.h               |   2 +-
 arch/arm64/include/asm/seccomp.h              |   2 +-
 arch/arm64/include/asm/signal32.h             |   9 +-
 arch/arm64/include/asm/signal32_common.h      |  27 ++++
 arch/arm64/include/asm/signal_common.h        |  33 +++++
 arch/arm64/include/asm/signal_ilp32.h         |  38 ++++++
 arch/arm64/include/asm/syscall.h              |   2 +-
 arch/arm64/include/asm/thread_info.h          |   4 +-
 arch/arm64/include/asm/unistd.h               |   6 +-
 arch/arm64/include/asm/vdso.h                 |   6 +
 arch/arm64/include/uapi/asm/bitsperlong.h     |   9 +-
 arch/arm64/include/uapi/asm/unistd.h          |  13 ++
 arch/arm64/kernel/Makefile                    |   8 +-
 arch/arm64/kernel/asm-offsets.c               |   9 +-
 arch/arm64/kernel/binfmt_elf32.c              |  38 ++++++
 arch/arm64/kernel/binfmt_ilp32.c              |  85 +++++++++++++
 arch/arm64/kernel/cpufeature.c                |   8 +-
 arch/arm64/kernel/cpuinfo.c                   |  20 +--
 arch/arm64/kernel/entry.S                     |  34 +++++-
 arch/arm64/kernel/entry32.S                   |  80 ------------
 arch/arm64/kernel/entry32_common.S            | 107 ++++++++++++++++
 arch/arm64/kernel/entry_ilp32.S               |  22 ++++
 arch/arm64/kernel/head.S                      |   2 +-
 arch/arm64/kernel/hw_breakpoint.c             |   8 +-
 arch/arm64/kernel/perf_regs.c                 |   2 +-
 arch/arm64/kernel/process.c                   |   7 +-
 arch/arm64/kernel/ptrace.c                    |  80 ++++++++++--
 arch/arm64/kernel/signal.c                    | 102 ++++++++++------
 arch/arm64/kernel/signal32.c                  | 107 ----------------
 arch/arm64/kernel/signal32_common.c           | 135 ++++++++++++++++++++
 arch/arm64/kernel/signal_ilp32.c              | 170 ++++++++++++++++++++++++++
 arch/arm64/kernel/sys_ilp32.c                 | 100 +++++++++++++++
 arch/arm64/kernel/traps.c                     |   5 +-
 arch/arm64/kernel/vdso-ilp32/.gitignore       |   2 +
 arch/arm64/kernel/vdso-ilp32/Makefile         |  80 ++++++++++++
 arch/arm64/kernel/vdso-ilp32/vdso-ilp32.S     |  33 +++++
 arch/arm64/kernel/vdso-ilp32/vdso-ilp32.lds.S |  95 ++++++++++++++
 arch/arm64/kernel/vdso.c                      |  69 +++++++++--
 arch/arm64/kernel/vdso/gettimeofday.S         |  20 ++-
 arch/arm64/kernel/vdso/vdso.S                 |   6 +-
 arch/blackfin/Kconfig                         |   1 +
 arch/c6x/include/uapi/asm/unistd.h            |   1 +
 arch/cris/Kconfig                             |   1 +
 arch/frv/Kconfig                              |   1 +
 arch/h8300/Kconfig                            |   1 +
 arch/h8300/include/uapi/asm/unistd.h          |   1 +
 arch/hexagon/Kconfig                          |   1 +
 arch/hexagon/include/uapi/asm/unistd.h        |   1 +
 arch/m32r/Kconfig                             |   1 +
 arch/m68k/Kconfig                             |   1 +
 arch/metag/Kconfig                            |   1 +
 arch/metag/include/uapi/asm/unistd.h          |   1 +
 arch/microblaze/Kconfig                       |   1 +
 arch/mips/Kconfig                             |   1 +
 arch/mn10300/Kconfig                          |   1 +
 arch/nios2/Kconfig                            |   1 +
 arch/nios2/include/uapi/asm/unistd.h          |   1 +
 arch/openrisc/Kconfig                         |   1 +
 arch/openrisc/include/uapi/asm/unistd.h       |   1 +
 arch/parisc/Kconfig                           |   1 +
 arch/powerpc/Kconfig                          |   1 +
 arch/score/Kconfig                            |   1 +
 arch/score/include/uapi/asm/unistd.h          |   1 +
 arch/sh/Kconfig                               |   1 +
 arch/sparc/Kconfig                            |   1 +
 arch/tile/Kconfig                             |   1 +
 arch/tile/include/uapi/asm/unistd.h           |   1 +
 arch/tile/kernel/compat.c                     |   3 +
 arch/unicore32/Kconfig                        |   1 +
 arch/unicore32/include/uapi/asm/unistd.h      |   1 +
 arch/x86/Kconfig                              |   1 +
 arch/x86/um/Kconfig                           |   1 +
 arch/xtensa/Kconfig                           |   1 +
 drivers/clocksource/arm_arch_timer.c          |   2 +-
 include/linux/fcntl.h                         |   2 +-
 include/linux/thread_bits.h                   |  63 ++++++++++
 include/linux/thread_info.h                   |  66 ++--------
 include/uapi/asm-generic/unistd.h             |  10 +-
 93 files changed, 1601 insertions(+), 413 deletions(-)
 create mode 100644 Documentation/arm64/ilp32.txt
 create mode 100644 arch/arm64/include/asm/is_compat.h
 create mode 100644 arch/arm64/include/asm/signal32_common.h
 create mode 100644 arch/arm64/include/asm/signal_common.h
 create mode 100644 arch/arm64/include/asm/signal_ilp32.h
 create mode 100644 arch/arm64/kernel/binfmt_elf32.c
 create mode 100644 arch/arm64/kernel/binfmt_ilp32.c
 create mode 100644 arch/arm64/kernel/entry32_common.S
 create mode 100644 arch/arm64/kernel/entry_ilp32.S
 create mode 100644 arch/arm64/kernel/signal32_common.c
 create mode 100644 arch/arm64/kernel/signal_ilp32.c
 create mode 100644 arch/arm64/kernel/sys_ilp32.c
 create mode 100644 arch/arm64/kernel/vdso-ilp32/.gitignore
 create mode 100644 arch/arm64/kernel/vdso-ilp32/Makefile
 create mode 100644 arch/arm64/kernel/vdso-ilp32/vdso-ilp32.S
 create mode 100644 arch/arm64/kernel/vdso-ilp32/vdso-ilp32.lds.S
 create mode 100644 include/linux/thread_bits.h

-- 
2.11.0

^ permalink raw reply	[flat|nested] 335+ messages in thread
[parent not found: <CAMj-D2DO_CfvD77izsGfggoKP45HSC9aD6auUPAYC9Yeq_aX7w@mail.gmail.com>]
* No subject
@ 2017-04-21 23:23 Sandeep Mann
  0 siblings, 0 replies; 335+ messages in thread
From: Sandeep Mann @ 2017-04-21 23:23 UTC (permalink / raw)




Adding linux-nvme at lists.infradead.org

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2017-04-21  4:59 wendyqzx at gmail.com
  0 siblings, 0 replies; 335+ messages in thread
From: wendyqzx at gmail.com @ 2017-04-21  4:59 UTC (permalink / raw)
  To: linux-security-module

A non-text attachment was scrubbed...
Name: EMAIL_2700592_linux-security-module.zip
Type: application/zip
Size: 2164 bytes
Desc: not available
URL: <http://kernsec.org/pipermail/linux-security-module-archive/attachments/20170421/b9d2e23c/attachment.zip>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2017-04-16 15:11 wendyqzx at gmail.com
  0 siblings, 0 replies; 335+ messages in thread
From: wendyqzx at gmail.com @ 2017-04-16 15:11 UTC (permalink / raw)
  To: linux-security-module

A non-text attachment was scrubbed...
Name: EMAIL_8910011500_linux-security-module.zip
Type: application/zip
Size: 2039 bytes
Desc: not available
URL: <http://kernsec.org/pipermail/linux-security-module-archive/attachments/20170416/2cb101ce/attachment.zip>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2017-04-09 10:46 76564 at max.arc.nasa.gov
  0 siblings, 0 replies; 335+ messages in thread
From: 76564 at max.arc.nasa.gov @ 2017-04-09 10:46 UTC (permalink / raw)
  To: linux-security-module

A non-text attachment was scrubbed...
Name: REPORT_876578354678929_linux-security-module.zip
Type: application/zip
Size: 67873 bytes
Desc: not available
URL: <http://kernsec.org/pipermail/linux-security-module-archive/attachments/20170409/8f34a4d7/attachment.zip>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2017-02-07  0:22 Scott Bauer
  2017-02-07  0:46 ` Jens Axboe
  0 siblings, 1 reply; 335+ messages in thread
From: Scott Bauer @ 2017-02-07  0:22 UTC (permalink / raw)


I screwed up and had size_t's in the uapi structures which of course
differ in size on 32 and 64 bit platforms. This caused issues running
32 bit userland on a 64 bit kernel. We're hoping to sneak this
patch in so we don't have to maintain a compat layer.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2017-01-31  7:58 Andy Gross
  0 siblings, 0 replies; 335+ messages in thread
From: Andy Gross @ 2017-01-31  7:58 UTC (permalink / raw)
  To: linux-arm-kernel

Subject: [Patch v5 0/2] Support ARM SMCC SoC vendor quirks

At least one SoC vendor (Qualcomm) requires additional processing done
during ARM SMCCC calls.  As such, an additional parameter to the
arm_smccc_smc is required to be able to handle SoC specific quirks.

The Qualcomm quirk is necessary due to the fact that the scm call can
be interrupted on Qualcomm ARM64 platforms.  When this occurs, the
call must be restarted using information that was passed back during
the original smc call.

The first patch in this series adds a quirk structure and also adds a
quirk parameter to arm_smccc_smc calls.  I added macros to allow users
to choose the API they need.  This keeps all of the current users who
do not need quirks from having to change anything.

The second patch adds the Qualcomm quirk and also implements the
Qualcomm firmware changes required to handle the restarting of the
interrupted SMC call.

The original patch set for the SMCCC session ID is located at:
https://lkml.org/lkml/2016/8/20/7

Changes from v4:
  - Fix issue with hvc calls.

Changes from v3:
  - Fix documentation

Changes from v2:
  - Use variadic macros

Changes from v1:
  - Add macros to handle both use cases per review comments

Andy Gross (2):
  arm: kernel: Add SMC structure parameter
  firmware: qcom: scm: Fix interrupted SCM calls

 arch/arm/kernel/armksyms.c      |  2 +-
 arch/arm/kernel/smccc-call.S    |  7 ++++---
 arch/arm64/kernel/arm64ksyms.c  |  2 +-
 arch/arm64/kernel/asm-offsets.c |  7 +++++--
 arch/arm64/kernel/smccc-call.S  | 22 ++++++++++++++++------
 drivers/firmware/qcom_scm-64.c  | 13 ++++++++++---
 include/linux/arm-smccc.h       | 38 +++++++++++++++++++++++++++++++-------
 7 files changed, 68 insertions(+), 23 deletions(-)

-- 
1.9.1

^ permalink raw reply	[flat|nested] 335+ messages in thread
* Re: [PATCH v2 0/7] uapi: export all headers under uapi directories
@ 2017-01-09 11:33 Arnd Bergmann
  2017-01-13 10:46 ` [PATCH v3 0/8] " Nicolas Dichtel
  0 siblings, 1 reply; 335+ messages in thread
From: Arnd Bergmann @ 2017-01-09 11:33 UTC (permalink / raw)
  To: linuxppc-dev, linux-kbuild
  Cc: linux-mips, alsa-devel, linux-ia64, linux-doc, airlied,
	linux-fbdev, dri-devel, linux-mtd, sparclinux, linux-arch,
	linux-s390, linux-am33-list, linux-c6x-dev, linux-rdma,
	linux-hexagon, linux-sh, coreteam, fcoe-devel, xen-devel,
	linux-snps-arc, linux-media, uclinux-h8-devel,
	adi-buildroot-devel, linux-raid, linux-m68k, openrisc,
	Nicolas Dichtel, linux-metag, linux-arm-kernel

On Friday, January 6, 2017 10:43:52 AM CET Nicolas Dichtel wrote:
> Here is the v2 of this series. The first 5 patches are just cleanup: some
> exported headers were still under a non-uapi directory.

Since this is meant as a cleanup, I commented on this to point out a cleaner
way to do the same.

> The patch 6 was spotted by code review: there is no in-tree user of this
> functionality.
> The last patch remove the use of header-y. Now all files under an uapi
> directory are exported.

Very nice!

> asm is a bit special, most of architectures export asm/<arch>/include/uapi/asm
> only, but there is two exceptions:
>  - cris which exports arch/cris/include/uapi/arch-v[10|32];

This is interesting, though not your problem. Maybe someone who understands
cris better can comment on this: How is the decision made about which of
the arch/user.h headers gets used? I couldn't find that in the sources,
but it appears to be based on kernel compile-time settings, which is
wrong for user space header files that should be independent of the kernel
config.

>  - tile which exports arch/tile/include/uapi/arch.
> Because I don't know if the output of 'make headers_install_all' can be changed,
> I introduce subdir-y in Kbuild file. The headers_install_all target copies all
> asm/<arch>/include/uapi/asm to usr/include/asm-<arch> but
> arch/cris/include/uapi/arch-v[10|32] and arch/tile/include/uapi/arch are not
> prefixed (they are put asis in usr/include/). If it's acceptable to modify the
> output of 'make headers_install_all' to export asm headers in
> usr/include/asm-<arch>/asm, then I could remove this new subdir-y and exports
> everything under arch/<arch>/include/uapi/.

I don't know if anyone still uses "make headers_install_all", I suspect
distros these days all use "make headers_install", so it probably
doesn't matter much.

In case of cris, it should be easy enough to move all the contents of the
uapi/arch-*/*.h headers into the respective uapi/asm/*.h headers, they
only seem to be referenced from there.

For tile, I suspect that would not work as the arch/*.h headers are
apparently defined as interfaces for both user space and kernel.

> Note also that exported files for asm are a mix of files listed by:
>  - include/uapi/asm-generic/Kbuild.asm;
>  - arch/x86/include/uapi/asm/Kbuild;
>  - arch/x86/include/asm/Kbuild.
> This complicates a lot the processing (arch/x86/include/asm/Kbuild is also
> used by scripts/Makefile.asm-generic).
> 
> This series has been tested with a 'make headers_install' on x86 and a
> 'make headers_install_all'. I've checked the result of both commands.
> 
> This patch is built against linus tree. I don't know if it should be
> made against antoher tree.

The series should probably get merged through the kbuild tree, but testing
it on mainline is fine here.

	Arnd

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2016-12-01 10:00 Ramana Radhakrishnan
  0 siblings, 0 replies; 335+ messages in thread
From: Ramana Radhakrishnan @ 2016-12-01 10:00 UTC (permalink / raw)
  To: linux-arm-kernel

>
> By the way, how is this implemented?  Some of them overlap existing
> callee-saved registers.


The AArch64 PCS requires that only the bottom 64 bits of SIMD
registers (v8-v15) are callee-saved. The top 64 bits of the current
Advanced SIMD registers are the responsibility of the caller. This
naturally extends to SVE.


Ramana

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2016-11-19 18:31 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2016-11-19 18:31 UTC (permalink / raw)
  To: ath9k-devel

80         /* Enable radar pulse detection if on a DFS channel. Spectral
81          * scanning and radar detection can not be used concurrently.
82          */
83         if (hw->conf.radar_enabled) {
84                 u32 rxfilter;
85
86                 rxfilter = ath9k_hw_getrxfilter(ah);
87                 rxfilter |= ATH9K_RX_FILTER_PHYRADAR |
88                                 ATH9K_RX_FILTER_PHYERR;
89                 ath9k_hw_setrxfilter(ah, rxfilter);
90                 ath_dbg(common, DFS, "DFS enabled at freq %d\n",
91                         chan->center_freq);
92         } else {
93                 /* perform spectral scan if requested. */
94                 if (test_bit(ATH_OP_SCANNING, &common->op_flags) &&
95                         sc->spec_priv.spectral_mode == SPECTRAL_CHANSCAN)
96                         ath9k_cmn_spectral_scan_trigger(common, &sc->spec_priv);
97         }

it seems that spectral can't ever be activated while operating on a DFS channel.

If you need to catch the opposite case, i.e. prevent feeding pseudo-radar pulses
into the pattern detector, you just need to ensure that they depend on
hw->conf.radar_enabled. A patch like the attached one should be enough.


Cheers,
Zefir

--------------81DB7B8680E9662AC7B071A0
Content-Type: text/x-patch;
 name="0001-ath9k-feed-DFS-detector-only-if-operating-on-radar-c.patch"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
 filename*0="0001-ath9k-feed-DFS-detector-only-if-operating-on-radar-c.pa";
 filename*1="tch"

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2016-11-19 18:31 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2016-11-19 18:31 UTC (permalink / raw)
  To: ath9k-devel

"""
Since ADC was not designed to be a dedicated HW RNG, we do not want to
bind it to /dev/hwrng framework directly.
"""

> Where is the description of the RNG, where is the test implementation? 
> > 
> > Otherwise, your patch will cause high CPU load,  as continuously read ADC
> > data if entropy bits under write_wakeup_threshold.
> 
> The issue is that although you may have analyzed it, others are unable to 
> measure the quality of the RNG and assess the design as well as the 
> implementation of the RNG. This RNG is the only implementation of a hardware 
> RNG that per default and without being able to change it at runtime injects 
> data into the input_pool where the noise source cannot be audited. Note, even 
> other respected RNG noise sources like the Intel RDRAND will not feed into /
> dev/random per default in a way that dominates all other noise sources.
> 
> I would like to be able to deactivate that noise source to the extent that it 
> does not cause /dev/random to unblock. The reason is that your noise source 
> starts to dominate all other noise sources.

I think the short-term problem here is the config logic:

config ATH9K_HWRNG
       bool "Random number generator support"
       depends on ATH9K && (HW_RANDOM = y || HW_RANDOM = ATH9K)
       default y

If you have *any* hwrngs you want to use and you have an ath9k card
(HW_RANDOM = y and ATH9K != n), you get the behavior Stephan is pointing
out.

Short term, we should just default no here.

> If you think that this patch is a challenge because your driver starts to 
> spin, please help and offer another solution.

Well, I don't buy the reasoning listed above for not using the hwrng
framework.  Interrupt timings were never designed to be a source of entropy
either.  We need to grab it where ever we can find it, especially on
embedded systems.  Documentation/hw_random.txt even says:

"""
This data is NOT CHECKED by any fitness tests, and could potentially be
bogus (if the hardware is faulty or has been tampered with).
"""

I really don't think there's a problem with adding these sorts of
sources under char/hw_random/.  I think the only thing we would be
concerned about, other than the already addressed entropy estimation,
would be constraining the data rate.

Is ath9k the only wireless card that exposes ADC registers?  What about
sound cards?

thx,

Jason.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2016-11-19 18:31 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2016-11-19 18:31 UTC (permalink / raw)
  To: ath9k-devel

"""
Since ADC was not designed to be a dedicated HW RNG, we do not want to bind=
 it to /dev/hwrng framework directly.
"""

> Where is the description of the RNG, where is the test implementation?=20
> >=20
> > Otherwise, your patch will cause high CPU load,  as continuously=20
> > read ADC data if entropy bits under write_wakeup_threshold.
>=20
> The issue is that although you may have analyzed it, others are unable=20
> to measure the quality of the RNG and assess the design as well as the=20
> implementation of the RNG. This RNG is the only implementation of a=20
> hardware RNG that per default and without being able to change it at=20
> runtime injects data into the input_pool where the noise source cannot=20
> be audited. Note, even other respected RNG noise sources like the=20
> Intel RDRAND will not feed into / dev/random per default in a way that do=
minates all other noise sources.
>=20
> I would like to be able to deactivate that noise source to the extent=20
> that it does not cause /dev/random to unblock. The reason is that your=20
> noise source starts to dominate all other noise sources.

I think the short-term problem here is the config logic:

config ATH9K_HWRNG
       bool "Random number generator support"
       depends on ATH9K && (HW_RANDOM =3D y || HW_RANDOM =3D ATH9K)
       default y

If you have *any* hwrngs you want to use and you have an ath9k card (HW_RAN=
DOM =3D y and ATH9K !=3D n), you get the behavior Stephan is pointing out.

Short term, we should just default no here.

> If you think that this patch is a challenge because your driver starts=20
> to spin, please help and offer another solution.

Well, I don't buy the reasoning listed above for not using the hwrng framew=
ork.  Interrupt timings were never designed to be a source of entropy eithe=
r.  We need to grab it where ever we can find it, especially on embedded sy=
stems.  Documentation/hw_random.txt even says:

"""
This data is NOT CHECKED by any fitness tests, and could potentially be bog=
us (if the hardware is faulty or has been tampered with).
"""

I really don't think there's a problem with adding these sorts of sources u=
nder char/hw_random/.  I think the only thing we would be concerned about, =
other than the already addressed entropy estimation, would be constraining =
the data rate.

Is ath9k the only wireless card that exposes ADC registers?  What about sou=
nd cards?

thx,

Jason.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2016-11-19 18:31 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2016-11-19 18:31 UTC (permalink / raw)
  To: ath9k-devel

behaviour. The biggest problem seems to be that the
ath9k_hw_set_sta_beacon_timers function is never called, so once the
hardware enters the PS mode there is no hardware trigger to wake up
the hardware. However, there is a mac80211 beacon loss software timer
is the one that wakes up the hardware after 7 lost beacon.

Could you provide me more details about the link between Power Save
Mode and the hardware triggers/sleep registers from
ath9k_hw_set_sta_beacon_timers?
The ath9k_hw_set_sta_beacon_timers should be called every time a
beacon is received, right?

[1] http://lxr.free-electrons.com/source/drivers/net/wireless/ath/ath9k/hw.c?v=4.3#L2269
[2] http://lxr.free-electrons.com/source/drivers/net/wireless/ath/ath9k/main.c#L486
[3] http://lxr.free-electrons.com/source/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c?v=2.6.35#L639


> BR
> Janusz
>
>> Thanks,
>> Doru
>> _______________________________________________
>> ath9k-devel mailing list
>> ath9k-devel at lists.ath9k.org
>> https://lists.ath9k.org/mailman/listinfo/ath9k-devel

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2016-11-11  3:38 Chunyan Zhang
  0 siblings, 0 replies; 335+ messages in thread
From: Chunyan Zhang @ 2016-11-11  3:38 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Steven,

On 21 October 2016 at 20:13, Chunyan Zhang <zhang.chunyan@linaro.org> wrote:
> On 18 October 2016 at 23:44, Steven Rostedt <rostedt@goodmis.org> wrote:
>> On Tue, 18 Oct 2016 16:08:58 +0800
>> Chunyan Zhang <zhang.chunyan@linaro.org> wrote:
>>
>>> Currently Function traces can be only exported to ring buffer, this
>>> patch added trace_export concept which can process traces and export
>>> them to a registered destination as an addition to the current only
>>> one output of Ftrace - i.e. ring buffer.
>>>
>>> In this way, if we want Function traces to be sent to other destination
>>> rather than ring buffer only, we just need to register a new trace_export
>>> and implement its own .write() function for writing traces to storage.
>>>
>>> With this patch, only Function trace (trace type is TRACE_FN)
>>> is supported.
>>
>> This is getting better, but I still have some nits.
>>
>
> Thanks.
>
>>>
>>> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
>>> ---
>>>  include/linux/trace.h |  28 +++++++++++
>>>  kernel/trace/trace.c  | 132 +++++++++++++++++++++++++++++++++++++++++++++++++-
>>>  2 files changed, 159 insertions(+), 1 deletion(-)
>>>  create mode 100644 include/linux/trace.h
>>>
>>> diff --git a/include/linux/trace.h b/include/linux/trace.h
>>> new file mode 100644
>>> index 0000000..eb1c5b8
>>> --- /dev/null
>>> +++ b/include/linux/trace.h
>>> @@ -0,0 +1,28 @@
>>> +#ifndef _LINUX_TRACE_H
>>> +#define _LINUX_TRACE_H
>>> +
>>> +#ifdef CONFIG_TRACING
>>> +/*
>>> + * The trace export - an export of Ftrace output. The trace_export
>>> + * can process traces and export them to a registered destination as
>>> + * an addition to the current only output of Ftrace - i.e. ring buffer.
>>> + *
>>> + * If you want traces to be sent to some other place rather than ring
>>> + * buffer only, just need to register a new trace_export and implement
>>> + * its own .write() function for writing traces to the storage.
>>> + *
>>> + * next              - pointer to the next trace_export
>>> + * write     - copy traces which have been delt with ->commit() to
>>> + *             the destination
>>> + */
>>> +struct trace_export {
>>> +     struct trace_export __rcu       *next;
>>> +     void (*write)(const char *, unsigned int);
>>
>> Why const char*? Why not const void *? This will never be a string.
>>
>
> Will revise this.
>
>>
>>> +};
>>> +
>>> +int register_ftrace_export(struct trace_export *export);
>>> +int unregister_ftrace_export(struct trace_export *export);
>>> +
>>> +#endif       /* CONFIG_TRACING */
>>> +
>>> +#endif       /* _LINUX_TRACE_H */
>>> diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
>>> index 8696ce6..db94ec1 100644
>>> --- a/kernel/trace/trace.c
>>> +++ b/kernel/trace/trace.c
>>> @@ -40,6 +40,7 @@
>>>  #include <linux/poll.h>
>>>  #include <linux/nmi.h>
>>>  #include <linux/fs.h>
>>> +#include <linux/trace.h>
>>>  #include <linux/sched/rt.h>
>>>
>>>  #include "trace.h"
>>> @@ -2128,6 +2129,132 @@ void trace_buffer_unlock_commit_regs(struct trace_array *tr,
>>>       ftrace_trace_userstack(buffer, flags, pc);
>>>  }
>>>
>>> +static void
>>> +trace_process_export(struct trace_export *export,
>>> +            struct ring_buffer_event *event)
>>> +{
>>> +     struct trace_entry *entry;
>>> +     unsigned int size = 0;
>>> +
>>> +     entry = ring_buffer_event_data(event);
>>> +
>>> +     size = ring_buffer_event_length(event);
>>> +
>>> +     if (export->write)
>>> +             export->write((char *)entry, size);
>>
>> Is there ever going to be a time where export->write wont be set?
>
> There hasn't been since only one trace_export (i.e. stm_ftrace) was
> added in this patch-set , I just wanted to make sure the write() has
> been set before registering trace_export like what I added in 2/3 of
> this series.
>
>>
>> And if there is, this can be racy. As in
>>
>>
>>         CPU 0:                  CPU 1:
>>         ------                  ------
>>         if (export->write)
>>
>>                                 export->write = NULL;
>
> Is there going to be this kind of use case? Why some one needs to
> change export->write() rather than register a new trace_export?
>
> I probably haven't understood your point thoroughly, please correct me
> if my guess was wrong.
>

Any further comments? :)

Thanks,
Chunyan

>
> Thanks for the review,
> Chunyan
>
>>
>>         export->write(entry, size);
>>
>>         BOOM!
>>
>>
>> -- Steve
>>
>>> +}
>>> +
>>> +static DEFINE_MUTEX(ftrace_export_lock);
>>> +
>>> +static struct trace_export __rcu *ftrace_exports_list __read_mostly;
>>> +
>>> +static DEFINE_STATIC_KEY_FALSE(ftrace_exports_enabled);
>>> +
>>> +static inline void ftrace_exports_enable(void)
>>> +{
>>> +     static_branch_enable(&ftrace_exports_enabled);
>>> +}
>>> +
>>> +static inline void ftrace_exports_disable(void)
>>> +{
>>> +     static_branch_disable(&ftrace_exports_enabled);
>>> +}
>>> +
>>> +void ftrace_exports(struct ring_buffer_event *event)
>>> +{
>>> +     struct trace_export *export;
>>> +
>>> +     preempt_disable_notrace();
>>> +
>>> +     export = rcu_dereference_raw_notrace(ftrace_exports_list);
>>> +     while (export) {
>>> +             trace_process_export(export, event);
>>> +             export = rcu_dereference_raw_notrace(export->next);
>>> +     }
>>> +
>>> +     preempt_enable_notrace();
>>> +}
>>> +
>>> +static inline void
>>> +add_trace_export(struct trace_export **list, struct trace_export *export)
>>> +{
>>> +     rcu_assign_pointer(export->next, *list);
>>> +     /*
>>> +      * We are entering export into the list but another
>>> +      * CPU might be walking that list. We need to make sure
>>> +      * the export->next pointer is valid before another CPU sees
>>> +      * the export pointer included into the list.
>>> +      */
>>> +     rcu_assign_pointer(*list, export);
>>> +}
>>> +
>>> +static inline int
>>> +rm_trace_export(struct trace_export **list, struct trace_export *export)
>>> +{
>>> +     struct trace_export **p;
>>> +
>>> +     for (p = list; *p != NULL; p = &(*p)->next)
>>> +             if (*p == export)
>>> +                     break;
>>> +
>>> +     if (*p != export)
>>> +             return -1;
>>> +
>>> +     rcu_assign_pointer(*p, (*p)->next);
>>> +
>>> +     return 0;
>>> +}
>>> +
>>> +static inline void
>>> +add_ftrace_export(struct trace_export **list, struct trace_export *export)
>>> +{
>>> +     if (*list == NULL)
>>> +             ftrace_exports_enable();
>>> +
>>> +     add_trace_export(list, export);
>>> +}
>>> +
>>> +static inline int
>>> +rm_ftrace_export(struct trace_export **list, struct trace_export *export)
>>> +{
>>> +     int ret;
>>> +
>>> +     ret = rm_trace_export(list, export);
>>> +     if (*list == NULL)
>>> +             ftrace_exports_disable();
>>> +
>>> +     return ret;
>>> +}
>>> +
>>> +int register_ftrace_export(struct trace_export *export)
>>> +{
>>> +     if (WARN_ON_ONCE(!export->write))
>>> +             return -1;
>>> +
>>> +     mutex_lock(&ftrace_export_lock);
>>> +
>>> +     add_ftrace_export(&ftrace_exports_list, export);
>>> +
>>> +     mutex_unlock(&ftrace_export_lock);
>>> +
>>> +     return 0;
>>> +}
>>> +EXPORT_SYMBOL_GPL(register_ftrace_export);
>>> +
>>> +int unregister_ftrace_export(struct trace_export *export)
>>> +{
>>> +     int ret;
>>> +
>>> +     mutex_lock(&ftrace_export_lock);
>>> +
>>> +     ret = rm_ftrace_export(&ftrace_exports_list, export);
>>> +
>>> +     mutex_unlock(&ftrace_export_lock);
>>> +
>>> +     return ret;
>>> +}
>>> +EXPORT_SYMBOL_GPL(unregister_ftrace_export);
>>> +
>>>  void
>>>  trace_function(struct trace_array *tr,
>>>              unsigned long ip, unsigned long parent_ip, unsigned long flags,
>>> @@ -2146,8 +2273,11 @@ trace_function(struct trace_array *tr,
>>>       entry->ip                       = ip;
>>>       entry->parent_ip                = parent_ip;
>>>
>>> -     if (!call_filter_check_discard(call, entry, buffer, event))
>>> +     if (!call_filter_check_discard(call, entry, buffer, event)) {
>>> +             if (static_branch_unlikely(&ftrace_exports_enabled))
>>> +                     ftrace_exports(event);
>>>               __buffer_unlock_commit(buffer, event);
>>> +     }
>>>  }
>>>
>>>  #ifdef CONFIG_STACKTRACE
>>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2016-09-30 14:37 Maxime Ripard
  0 siblings, 0 replies; 335+ messages in thread
From: Maxime Ripard @ 2016-09-30 14:37 UTC (permalink / raw)
  To: linux-arm-kernel

Subject: [PATCH v5 0/5] drm: Add Support for Passive RGB to VGA bridges

Hi,

This serie is about adding support for the RGB to VGA bridge found in
the A13-Olinuxino and the CHIP VGA adapter.

Both these boards rely on an entirely passive bridge made out of
resitor ladders that do not require any initialisation. The only thing
needed is to get the timings from the screen if available (and if not,
fall back on XGA standards), set up the display pipeline to output on
the RGB bus with the proper timings, and you're done.

This serie also fixes a bunch of bugs uncovered when trying to
increase the resolution, and hence the pixel clock, of our
pipeline. It also fixes a few bugs in the DRM driver itself that went
unnoticed before.

Let me know what you think,
Maxime

Changes from v4:
  - Removed unused functions

Changes from v3:
  - Depends on OF in Kconfig
  - Fixed typos in the driver comments
  - Removed the mention of a "passive" bridge in the bindings doc
  - Made the strcuture const
  - Removed the nops and best_encoders implementations
  - Removed the call to drm_bridge_enable in the sun4i driver

Changes from v2:
  - Changed the compatible as suggested
  - Rebased on top 4.8

Changes from v1:
  - Switch to using a vga-connector
  - Use drm_encoder bridge pointer instead of doing our own
  - Report the connector status as unknown instead of connected by
    default, and as connected only if we can retrieve the EDID.
  - Switch to of_i2c_get_adapter by node, and put the reference when done
  - Rebased on linux-next	      

Maxime Ripard (5):
  drm/sun4i: rgb: Remove the bridge enable/disable functions
  drm/bridge: Add RGB to VGA bridge support
  ARM: sun5i: a13-olinuxino: Enable VGA bridge
  ARM: multi_v7: enable VGA bridge
  ARM: sunxi: Enable VGA bridge

 .../bindings/display/bridge/rgb-to-vga-bridge.txt  |  48 +++++
 arch/arm/boot/dts/sun5i-a13-olinuxino.dts          |  54 +++++
 arch/arm/configs/multi_v7_defconfig                |   1 +
 arch/arm/configs/sunxi_defconfig                   |   1 +
 drivers/gpu/drm/bridge/Kconfig                     |   7 +
 drivers/gpu/drm/bridge/Makefile                    |   1 +
 drivers/gpu/drm/bridge/rgb-to-vga.c                | 229 +++++++++++++++++++++
 drivers/gpu/drm/sun4i/sun4i_rgb.c                  |   6 -
 8 files changed, 341 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/rgb-to-vga-bridge.txt
 create mode 100644 drivers/gpu/drm/bridge/rgb-to-vga.c

-- 
2.9.3

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2016-07-10  9:24 ` Neil Armstrong
  0 siblings, 0 replies; 335+ messages in thread
From: Neil Armstrong @ 2016-07-10  9:24 UTC (permalink / raw)
  To: linus-amlogic

Subject: [PATCH v2 0/4] pwm: Add Amlogic Meson SoC PWM Controller

Add support for the PWM controller found in Amlogic Meson SoCs.
This controller provides a dual PWM output with 4 selectable clock source
and a two level divider to achieve a better PWM range.

Currently Meson8b and GXBB SoCs are supported.

Changes since v1 at http://lkml.kernel.org/r/1466173784-15625-1-git-send-email-narmstrong at baylibre.com :
- fix meson8b dtsi

Neil Armstrong (4):
  pwm: Add support for Meson PWM Controller
  dt-bindings: pwm: Add bindings for Meson PWM Controller
  ARM64: dts: meson-gxbb: Add Meson GXBB PWM Controller nodes
  ARM: dts: meson8b: Add Meson8b PWM Controller nodes

 .../devicetree/bindings/pwm/pwm-meson.txt          |  21 +
 arch/arm/boot/dts/meson8b.dtsi                     |  21 +
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        |  28 ++
 drivers/pwm/Kconfig                                |   9 +
 drivers/pwm/Makefile                               |   1 +
 drivers/pwm/pwm-meson.c                            | 491 +++++++++++++++++++++
 6 files changed, 571 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/pwm-meson.txt
 create mode 100644 drivers/pwm/pwm-meson.c

-- 
2.7.0

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2016-06-13  6:24 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2016-06-13  6:24 UTC (permalink / raw)
  To: ath9k-devel

seems to be effective. But I'm not sure.
And sometimes, some phase measurement show large dispalcement along y-axis
even they are captured within very short duration.

Hence the question is,
Is ath9k reports CSI with those unwanted linear phase offset removed?
If it is not, should I look into Atheros CSI tool? As I look into it, it
just captures CSI from the kernel and does not modify it.
Or, Is CSI of Atheros different form that of Intel? I don't think so...

The final goal of extracting true phase from CSI of ath9k is to determine
angle of arrival (AoA) of signal.

Regards,
Jeon.

[1]: http://pdcc.ntu.edu.sg/wands/Atheros/ "Atheros CSI Extraction Tool"
[2] K. Qian, C. Wu, Z. Yang, Y. Liu, and Z. Zhou, =E2=80=9CPADS: Passive de=
tection
of moving targets with dynamic speed using PHY layer information,=E2=80=9D =
in 2014
20th IEEE International Conference on Parallel and Distributed Systems
(ICPADS), 2014, pp. 1=E2=80=938.
[3] M. Kotaru, K. Joshi, D. Bharadia, and S. Katti, =E2=80=9CSpotFi: Decime=
ter
Level Localization Using WiFi,=E2=80=9D SIGCOMM Comput. Commun. Rev., vol. =
45, no.
4, pp. 269=E2=80=93282, Aug. 2015.
[4] http://dhalperi.github.io/linux-80211n-csitool/ "Linux 802.11n CSI
Tool"

--001a113ff17008949005352bd33e
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr">Dear ath9k developers,<br><br>I am currently working with =
Atheros CSI Extraction Tool [1] to get a true phase of each subcarrier.<br>=
<br>- Background<br><br>[2], [3] and many other papers claim that phase inf=
ormation from extracted CSI contains two components: true phase and unwante=
d phase offset due to subcarrier and time delay.<br>i.e., measured_phase =
=3D true_phase + time_delay * subcarrier_index + phase_offset_due_to_txrx_m=
ismatch<br>This equation can be visualized as below:<br><br><a href=3D"http=
://i.imgur.com/rk9Hh1M.png">http://i.imgur.com/rk9Hh1M.png</a><br><br>(Plea=
se note that this figure is based on CSI tool for Intel 5300 NIC.)<br><br>I=
t contains unwanted linear phase offset and constant phase offset. Since th=
e true phase is relatively small, it seems that phase is monotonically incr=
easing or decreasing in macro view due to the unwanted phase offsets. We ca=
nnot see a tiny true phase currently.<div><div><br>To remove phase offset d=
ue to subcarrier, the mentioned papers are attempting to remove it with lin=
ear fitting ax + b,<br>where a =3D slope of the figure, b =3D average of me=
asured phase, and x =3D subcarrier index.<br><br>After removing unwanted ph=
ase offset components, the true phase is estimated.<br>This estimated true =
phase seems steady and consistent across a time duration shorter than &lt; =
100 - 1000 ms:<br><br><a href=3D"http://i.imgur.com/AO89vYV.png">http://i.i=
mgur.com/AO89vYV.png</a><br><br>Note that Y-axis scale is reduece from [-50=
, 10] to [5, -3]<br><br>- My question<br><br>I want to extract and manipula=
te CSI phase WITH ATH9K NIC.<br><br>After extracting CSI from my ath9k NIC =
(AR9580 @ 2.4 GHz) with Atheros CSI extraction tool,<br>I&#39;ve tried vari=
ous fitting methods to eliminate unwanted components and stacked results fr=
om nearly 100 packets:<br><br><a href=3D"http://i.imgur.com/5r9eYwO.png">ht=
tp://i.imgur.com/5r9eYwO.png</a><br><br>From the result, in short, removing=
 only constant offset across subcarrier seems to be effective. But I&#39;m =
not sure.</div><div>And sometimes, some phase measurement show large dispal=
cement along y-axis even they are captured within very short duration.<br><=
br>Hence the question is,</div><div>Is ath9k reports CSI with those unwante=
d linear phase offset removed?</div><div>If it is not, should I look into A=
theros CSI tool? As I look into it, it just captures CSI from the kernel an=
d does not modify it.</div><div>Or, Is CSI of Atheros different form that o=
f Intel? I don&#39;t think so...</div><div><br></div><div>The final goal of=
 extracting true phase from CSI of ath9k is to determine angle of arrival (=
AoA) of signal.<br><br>Regards,<br>Jeon.<br><br>[1]: <a href=3D"http://pdcc=
.ntu.edu.sg/wands/Atheros/">http://pdcc.ntu.edu.sg/wands/Atheros/</a> &quot=
;Atheros CSI Extraction Tool&quot;<br>[2] K. Qian, C. Wu, Z. Yang, Y. Liu, =
and Z. Zhou, =E2=80=9CPADS: Passive detection of moving targets with dynami=
c speed using PHY layer information,=E2=80=9D in 2014 20th IEEE Internation=
al Conference on Parallel and Distributed Systems (ICPADS), 2014, pp. 1=E2=
=80=938.<br>[3] M. Kotaru, K. Joshi, D. Bharadia, and S. Katti, =E2=80=9CSp=
otFi: Decimeter Level Localization Using WiFi,=E2=80=9D SIGCOMM Comput. Com=
mun. Rev., vol. 45, no. 4, pp. 269=E2=80=93282, Aug. 2015.<br>[4] <a href=
=3D"http://dhalperi.github.io/linux-80211n-csitool/">http://dhalperi.github=
.io/linux-80211n-csitool/</a> &quot;Linux 802.11n CSI Tool&quot;
</div></div></div>

--001a113ff17008949005352bd33e--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2016-06-13  6:24 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2016-06-13  6:24 UTC (permalink / raw)
  To: ath9k-devel

assumed the frequencies and numbers were correct, which is why I
picked it up.

> Is this trying to add 4.9 GHz channels in general for multiple different
> use cases? And if so, what are those use cases? Or is this only for some
> public safety cases? And if so, for which regulatory domains?

I believe he has a client that requires this support in a Linux kernel.

> To be frank, I really don't see how this would be even close to a state
> that should be accepted into the upstream tree.

Fair enough I'm dropping this.

Kalle, I've marked this as rejected and archived on Patchwork.

Thanks,

-- 
Julian Calaby

Email: julian.calaby at gmail.com
Profile: http://www.google.com/profiles/julian.calaby/

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2016-04-22  8:25 Daniel Lezcano
  2016-04-22  8:27 ` Daniel Lezcano
  0 siblings, 1 reply; 335+ messages in thread
From: Daniel Lezcano @ 2016-04-22  8:25 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Rafael,

please pull the following changes for 4.7.

 * Constify the cpuidle_ops structure and the types returned by the 
 * functions using it (Jisheng Zhang)


Thanks !

  -- Daniel

The following changes since commit c3b46c73264b03000d1e18b22f5caf63332547c9:

  Linux 4.6-rc4 (2016-04-17 19:13:32 -0700)

are available in the git repository at:

  http://git.linaro.org/people/daniel.lezcano/linux.git cpuidle/4.7

for you to fetch changes up to 5e7c17df795e462c70a43f1b3b670e08efefe8fd:

  drivers: firmware: psci: use const and __initconst for psci_cpuidle_ops 
(2016-04-20 10:44:32 +0200)

----------------------------------------------------------------
Jisheng Zhang (4):
      ARM: cpuidle: add const qualifier to cpuidle_ops member in structures
      ARM: cpuidle: constify return value of arm_cpuidle_get_ops()
      soc: qcom: spm: Use const and __initconst for qcom_cpuidle_ops
      drivers: firmware: psci: use const and __initconst for 
psci_cpuidle_ops

 arch/arm/include/asm/cpuidle.h | 2 +-
 arch/arm/kernel/cpuidle.c      | 6 +++---
 drivers/firmware/psci.c        | 2 +-
 drivers/soc/qcom/spm.c         | 2 +-
 4 files changed, 6 insertions(+), 6 deletions(-)

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2016-04-11  7:51 Paul Walmsley
  0 siblings, 0 replies; 335+ messages in thread
From: Paul Walmsley @ 2016-04-11  7:51 UTC (permalink / raw)
  To: linux-arm-kernel

OMAP baseline test results for v4.6-rc3

Here are some basic OMAP test results for Linux v4.6-rc3.
Logs and other details at:

    http://www.pwsan.com/omap/testlogs/test_v4.6-rc3/20160411005353/


Test summary
------------

Build: uImage:
    Pass ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
		  omap1_defconfig_5912osk_only

Build: uImage+dtb:
    Pass (13/13): omap2plus_defconfig_am33xx_only/am335x-bone,
		  omap2plus_defconfig/omap4-panda,
		  omap2plus_defconfig/omap4-panda-es,
		  omap2plus_defconfig/omap4-var-stk-om44,
		  omap2plus_defconfig/omap3-evm-37xx,
		  omap2plus_defconfig_n800_only_a/omap2420-n800,
		  omap2plus_defconfig/omap2430-sdp,
		  omap2plus_defconfig/am3517-evm,
		  omap2plus_defconfig/omap3-beagle,
		  omap2plus_defconfig/omap3-beagle-xm,
		  omap2plus_defconfig/omap3-sbc-t3517,
		  omap2plus_defconfig/omap5-uevm,
		  omap2plus_defconfig/omap5-sbc-t54

Build: zImage:
    Pass (18/18): omap2plus_defconfig, omap2plus_defconfig_am33xx_only,
		  omap2plus_defconfig_n800_only_a,
		  omap2plus_defconfig_n800_multi_omap2xxx,
		  omap2plus_defconfig_2430sdp_only,
		  omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
		  omap2plus_defconfig_omap2_4_only,
		  omap2plus_defconfig_omap3_4_only,
		  omap2plus_defconfig_omap5_only,
		  omap2plus_defconfig_dra7xx_only,
		  omap2plus_defconfig_am43xx_only,
		  omap2plus_defconfig_ti81xx_only,
		  rmk_omap3430_ldp_oldconfig,
		  rmk_omap3430_ldp_allnoconfig,
		  rmk_omap4430_sdp_oldconfig,
		  rmk_omap4430_sdp_allnoconfig, multi_v7_defconfig

Build warnings from toolchain: uImage:
    (none)

Build warnings from toolchain: uImage+dtb:
    (none)

Build warnings from toolchain: zImage:
    FAIL (16/18): omap2plus_defconfig, omap2plus_defconfig_am33xx_only,
		  omap2plus_defconfig_n800_only_a,
		  omap2plus_defconfig_n800_multi_omap2xxx,
		  omap2plus_defconfig_2430sdp_only,
		  omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
		  omap2plus_defconfig_omap2_4_only,
		  omap2plus_defconfig_omap3_4_only,
		  omap2plus_defconfig_omap5_only,
		  omap2plus_defconfig_dra7xx_only,
		  omap2plus_defconfig_am43xx_only,
		  omap2plus_defconfig_ti81xx_only,
		  rmk_omap3430_ldp_oldconfig,
		  rmk_omap4430_sdp_oldconfig, multi_v7_defconfig

Boot to userspace:
    FAIL ( 1/18): 2430sdp
    skip ( 3/18): 5912osk, 3517evm, 5430es2sbct54
    Pass (14/18): am335xbonelt, am437xsk, am335xbone, 4430es2panda,
		  4460pandaes, 4460varsomom, 37xxevm, 3530es3beagle,
		  3530es31beagle, 3730beaglexm, 3730es12beaglexm,
		  cmt3517, 5430es2uevm, 2420n800

Kernel warnings during boot to userspace:
    FAIL ( 2/18): 4430es2panda, cmt3517

PM: chip retention via suspend:
    FAIL ( 6/11): am335xbonelt, 4430es2panda, 4460varsomom, 37xxevm,
		  2430sdp, 5430es2uevm
    Pass ( 5/11): 4460pandaes, 3530es3beagle, 3530es31beagle,
		  3730beaglexm, 3730es12beaglexm

PM: chip retention via dynamic idle:
    FAIL ( 8/11): am335xbonelt, 4430es2panda, 4460varsomom, 37xxevm,
		  3530es3beagle, 3530es31beagle, 2430sdp, 5430es2uevm
    Pass ( 3/11): 4460pandaes, 3730beaglexm, 3730es12beaglexm

PM: chip off (except CORE, due to errata) via suspend:
    Pass ( 1/ 1): 3730beaglexm

PM: chip off (except CORE, due to errata) via dynamic idle:
    Pass ( 1/ 1): 3730beaglexm

PM: chip off via suspend:
    FAIL ( 2/ 4): 37xxevm, 3530es3beagle
    Pass ( 2/ 4): 3530es31beagle, 3730es12beaglexm

PM: chip off via dynamic idle:
    FAIL ( 3/ 4): 37xxevm, 3530es3beagle, 3530es31beagle
    Pass ( 1/ 4): 3730es12beaglexm

Kernel warnings during PM test:
    FAIL ( 1/18): 4430es2panda

Obsolete Kconfig symbols:
    FAIL ( 3/21): omap1_defconfig, omap2plus_defconfig,
		  multi_v7_defconfig


vmlinux object size
(delta in bytes from test_v4.6-rc2 (9735a22799b9214d17d3c231fe377fc852f042e9)):
   text     data      bss    total  kernel
   +772     -896        0     -124  omap1_defconfig
   +772     -920        0     -148  omap1_defconfig_1510innovator_only
   +596     -928        0     -332  omap1_defconfig_5912osk_only
   -108      +64        0      -44  multi_v7_defconfig
   +236        0        0     +236  omap2plus_defconfig
   +976        0        0     +976  omap2plus_defconfig_2430sdp_only
   +300        0        0     +300  omap2plus_defconfig_am33xx_only
   +300        0        0     +300  omap2plus_defconfig_am43xx_only
   +236        0        0     +236  omap2plus_defconfig_cpupm
   +236        0        0     +236  omap2plus_defconfig_dra7xx_only
   +388       -8        0     +380  omap2plus_defconfig_n800_multi_omap2xxx
   +420        0        0     +420  omap2plus_defconfig_n800_only_a
   +164        0        0     +164  omap2plus_defconfig_no_pm
   +172        0        0     +172  omap2plus_defconfig_omap2_4_only
   +236        0        0     +236  omap2plus_defconfig_omap3_4_only
   +300        0        0     +300  omap2plus_defconfig_omap5_only
  +1004        0        0    +1004  omap2plus_defconfig_ti81xx_only
   +244        0      -48     +196  rmk_omap3430_ldp_allnoconfig
  +3896        0        0    +3896  rmk_omap3430_ldp_oldconfig
   +228        0      -48     +180  rmk_omap4430_sdp_allnoconfig
   +200        0        0     +200  rmk_omap4430_sdp_oldconfig

Boot-time memory difference
(delta in bytes from test_v4.6-rc2 (9735a22799b9214d17d3c231fe377fc852f042e9))
  avail  rsrvd   high  freed  board          kconfig
  (no differences)

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2016-03-07 17:52 nunojsa
  0 siblings, 0 replies; 335+ messages in thread
From: nunojsa @ 2016-03-07 17:52 UTC (permalink / raw)
  To: kernelnewbies



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2016-02-09  7:29 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2016-02-09  7:29 UTC (permalink / raw)
  To: ath9k-devel

CSI Tool->
-  Gives 56 complex numbers which represent the mag and phase
 of the ofdm subcarriers. 
- The CSI tool is listening for HT20/HT40 packets with channel sounding
 bit (or bits) set so is per packet and needs a transmitter node also
- CSI is also available on some intel (sorry to mention the dirty word) chips 
but you need to have specialised firmware which the kernel 
and userland CSI code accesses.

SpectralScan->
- Is easier to use 
- give you the phase and mag (summed) in one figure.
- don't need specialised transmitters.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2015-12-13 21:57 何旦洁
  0 siblings, 0 replies; 335+ messages in thread
From: 何旦洁 @ 2015-12-13 21:57 UTC (permalink / raw)
  To: linux-arm-kernel



???? iPhone

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2015-11-16 16:13 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2015-11-16 16:13 UTC (permalink / raw)
  To: ath9k-devel

anything over that is cause for great concern.

Is there any other metric that you would suggest we track that would
show some issues due to wifi interference?

Is there anyway to get AR9341 datasheet?

Cheers,
Valent.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2015-10-27  0:44 xuyiping
  0 siblings, 0 replies; 335+ messages in thread
From: xuyiping @ 2015-10-27  0:44 UTC (permalink / raw)
  To: linux-arm-kernel



^ permalink raw reply	[flat|nested] 335+ messages in thread
[parent not found: <E1ZqY3A-0004Mt-KH@feisty.vs19.net>]
* No subject
@ 2015-10-21  6:17 Rock Lee
  0 siblings, 0 replies; 335+ messages in thread
From: Rock Lee @ 2015-10-21  6:17 UTC (permalink / raw)
  To: kernelnewbies

unsubscribe kernelnewbies

Regards
----
Rock Lee 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20151021/6fa4734a/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2015-10-12 17:26 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2015-10-12 17:26 UTC (permalink / raw)
  To: ath9k-devel

div>Let me know if something is not clear.<br><br></div></div></blockquote>=
<div>I am interested if you reintroduce bug that Sujith already fix in comm=
it:</div><div>ath9k: Enable HW queue control only for MCC<br></div><div><br=
></div><div>While as I understand correctly this patch disable hw queues fo=
r non-mcc (also clear IEEE80211_HW_QUEUE_CONTROL) and your</div><div><span =
style=3D"font-size:12.8px"><br></span></div><div><span style=3D"font-size:1=
2.8px">+=C2=A0 =C2=A0 =C2=A0 =C2=A0if (ath9k_is_chanctx_enabled())</span><b=
r></div><div><span style=3D"font-size:12.8px">+=C2=A0 =C2=A0 =C2=A0 =C2=A0 =
=C2=A0 =C2=A0 =C2=A0 =C2=A0q =3D fi-&gt;txq;</span><br style=3D"font-size:1=
2.8px"><span style=3D"font-size:12.8px">+=C2=A0 =C2=A0 =C2=A0 =C2=A0else</s=
pan><br style=3D"font-size:12.8px"><span style=3D"font-size:12.8px">+=C2=A0=
 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0q =3D info-&gt;hw_queue;</=
span><br></div><div><span style=3D"font-size:12.8px"><br></span></div><div>=
<span style=3D"font-size:12.8px">Use again hw_queue for standard non-mcc op=
eration.</span></div><div><span style=3D"font-size:12.8px"><br></span></div=
><div><span style=3D"font-size:12.8px">Please check this, I am sure while d=
id only simple check :)</span></div><div><span style=3D"font-size:12.8px"><=
br></span></div><div><span style=3D"font-size:12.8px">BR<br>Janusz</span></=
div><div><span style=3D"font-size:12.8px"><br></span></div><div>=C2=A0</div=
><blockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border=
-left-width:1px;border-left-color:rgb(204,204,204);border-left-style:solid;=
padding-left:1ex"><div dir=3D"ltr"><div></div>Regards,<br></div><div class=
=3D"gmail_extra"><br clear=3D"all"><div><div><div dir=3D"ltr"><table cellsp=
acing=3D"0" cellpadding=3D"0" border=3D"0" style=3D"font-family:&#39;Times =
New Roman&#39;"><tbody><tr><td style=3D"width:60px;height:37px"><a href=3D"=
http://www.fon.com/" target=3D"_blank"><img src=3D"http://corp.fon.com/site=
s/default/files/filelibrary/firmafon.png" width=3D"60" height=3D"37" title=
=3D"Fon" alt=3D"Fon" border=3D"0" style=3D"border: 0px none;"></a></td></tr=
><tr><td style=3D"border-bottom-width:1px;border-bottom-style:dotted;min-wi=
dth:100px;font-family:Arial;font-size:10pt;color:rgb(51,51,51);font-weight:=
bold;padding:15px 0px 3px">Borja Salazar</td></tr><tr><td style=3D"padding:=
5px 0px 1px;font-family:Arial;font-size:7.5pt;color:rgb(102,102,102)">Firmw=
are team</td></tr><tr><td style=3D"padding:1px 0px;font-family:Arial;font-s=
ize:7.5pt;color:rgb(102,102,102)"></td></tr><tr><td style=3D"padding:1px 0p=
x;font-family:Arial;font-size:7.5pt;color:rgb(102,102,102)"></td></tr><tr><=
td style=3D"padding:1px 0px;font-family:Arial;font-size:7.5pt;color:rgb(102=
,102,102)">All information in this email is=C2=A0<a href=3D"http://corp.fon=
.com/legal/email-disclaimer" style=3D"color:rgb(102,102,102)" target=3D"_bl=
ank">confidential</a></td></tr></tbody></table></div></div></div><div><div =
class=3D"h5">
<br><div class=3D"gmail_quote">On Fri, Nov 13, 2015 at 11:33 AM, Borja Sala=
zar <span dir=3D"ltr">&lt;<a href=3D"mailto:borja.salazar@fon.com" target=
=3D"_blank">borja.salazar at fon.com</a>&gt;</span> wrote:<br><blockquote clas=
s=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-left-width:1px;b=
order-left-color:rgb(204,204,204);border-left-style:solid;padding-left:1ex"=
><span>When channel context is enabled, we could be<br>
stopping/awakening an incorrect queue.<br>
<br>
</span>Signed-off-by: Borja Salazar &lt;<a href=3D"mailto:borja.salazar@fon=
.com" target=3D"_blank">borja.salazar at fon.com</a>&gt;<br>
<div><div>---<br>
=C2=A0drivers/net/wireless/ath/ath9k/xmit.c | 22 ++++++++++++----------<br>
=C2=A01 file changed, 12 insertions(+), 10 deletions(-)<br>
<br>
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/a=
th/ath9k/xmit.c<br>
index 3e3dac3..9b17a59 100644<br>
--- a/drivers/net/wireless/ath/ath9k/xmit.c<br>
+++ b/drivers/net/wireless/ath/ath9k/xmit.c<br>
@@ -147,7 +147,12 @@ static void ath_txq_skb_done(struct ath_softc *sc, str=
uct ath_txq *txq,<br>
=C2=A0{<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 struct ieee80211_tx_info *info =3D IEEE80211_SK=
B_CB(skb);<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 struct ath_frame_info *fi =3D get_frame_info(sk=
b);<br>
-=C2=A0 =C2=A0 =C2=A0 =C2=A0int q =3D fi-&gt;txq;<br>
+=C2=A0 =C2=A0 =C2=A0 =C2=A0int q;<br>
+<br>
+=C2=A0 =C2=A0 =C2=A0 =C2=A0if (ath9k_is_chanctx_enabled())<br>
+=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0q =3D fi-&gt;txq;<b=
r>
+=C2=A0 =C2=A0 =C2=A0 =C2=A0else<br>
+=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0q =3D info-&gt;hw_q=
ueue;<br>
<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 if (q &lt; 0)<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 return;<br>
@@ -158,10 +163,7 @@ static void ath_txq_skb_done(struct ath_softc *sc, str=
uct ath_txq *txq,<br>
<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 if (txq-&gt;stopped &amp;&amp;<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 txq-&gt;pending_frames &lt; sc-&g=
t;tx.txq_max_pending[q]) {<br>
-=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0if (ath9k_is_chanct=
x_enabled())<br>
-=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=
=A0 =C2=A0ieee80211_wake_queue(sc-&gt;hw, info-&gt;hw_queue);<br>
-=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0else<br>
-=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=
=A0 =C2=A0ieee80211_wake_queue(sc-&gt;hw, q);<br>
+=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0ieee80211_wake_queu=
e(sc-&gt;hw, q);<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 txq-&gt;stopped =3D=
 false;<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 }<br>
=C2=A0}<br>
@@ -2299,17 +2301,17 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk=
_buff *skb,<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0* info are no longer valid (overwritten b=
y the ath_frame_info data.<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0*/<br>
<br>
-=C2=A0 =C2=A0 =C2=A0 =C2=A0q =3D skb_get_queue_mapping(skb);<br>
+=C2=A0 =C2=A0 =C2=A0 =C2=A0if (ath9k_is_chanctx_enabled())<br>
+=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0q =3D skb_get_queue=
_mapping(skb);<br>
+=C2=A0 =C2=A0 =C2=A0 =C2=A0else<br>
+=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0q =3D info-&gt;hw_q=
ueue;<br>
<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 ath_txq_lock(sc, txq);<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 if (txq =3D=3D sc-&gt;tx.txq_map[q]) {<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 fi-&gt;txq =3D q;<b=
r>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 if (++txq-&gt;pendi=
ng_frames &gt; sc-&gt;tx.txq_max_pending[q] &amp;&amp;<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 !txq-=
&gt;stopped) {<br>
-=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=
=A0 =C2=A0if (ath9k_is_chanctx_enabled())<br>
-=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=
=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0ieee80211_stop_queue(sc-&gt;hw, info-=
&gt;hw_queue);<br>
-=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=
=A0 =C2=A0else<br>
-=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=
=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0ieee80211_stop_queue(sc-&gt;hw, q);<b=
r>
+=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=
=A0 =C2=A0ieee80211_stop_queue(sc-&gt;hw, q);<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=
=A0 =C2=A0 txq-&gt;stopped =3D true;<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 }<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 }<br>
--<br>
2.3.6<br>
<br>
</div></div></blockquote></div><br></div></div></div>
</blockquote></div><br></div></div>

--001a11444ce011feae05246a36f0--

^ permalink raw reply related	[flat|nested] 335+ messages in thread
* No subject
@ 2015-09-18 17:23 Shraddha Barke
  0 siblings, 0 replies; 335+ messages in thread
From: Shraddha Barke @ 2015-09-18 17:23 UTC (permalink / raw)
  To: kernelnewbies

By mistake I made some changes to staging-next branch
Now I've reverted those changes but I'm getting this message when I
checkout to staging-next

Your branch is ahead of 'origin/staging-next' by 4 commits.
  (use "git push" to publish your local commits)

How do I fix this?

Thanks in advance
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20150918/82c325ad/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2015-09-18  4:49 Shraddha Barke
  0 siblings, 0 replies; 335+ messages in thread
From: Shraddha Barke @ 2015-09-18  4:49 UTC (permalink / raw)
  To: kernelnewbies

I updated my local kernel repository with all recent commits using the
following commands-
git checkout staging-next
git pull

After that when I try to compile, I'm getting an error

scripts/sign-file.c:20:25: fatal error: openssl/bio.h: No such file or
directory
 #include <openssl/bio.h>
                         ^
compilation terminated.
scripts/Makefile.host:91: recipe for target 'scripts/sign-file' failed
make[1]: *** [scripts/sign-file] Error 1
Makefile:545: recipe for target 'scripts' failed
make: *** [scripts] Error 2


What should I do to fix it?

Thanks in advance.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20150918/0617fe64/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2015-09-01 14:14 Mika Penttilä
  2015-09-01 15:22 ` Fabio Estevam
  0 siblings, 1 reply; 335+ messages in thread
From: Mika Penttilä @ 2015-09-01 14:14 UTC (permalink / raw)
  To: linux-arm-kernel

This one causes imx6q with debug uart connected to "schedule while
atomic" endlessly :


9e7b399d6528eac33a6fbfceb2b92af209c3454d is the first bad commit
commit 9e7b399d6528eac33a6fbfceb2b92af209c3454d
Author: Eduardo Valentin <edubezval@gmail.com>
Date:   Tue Aug 11 10:21:20 2015 -0700

    serial: imx: remove unbalanced clk_prepare

    The current code attempts to prepare clk_per and clk_ipg
    before using the device. However, the result is an extra
    prepare call on each clock. Here is the output of uart
    clocks (only uart enabled and used as console):

    $  grep uart /sys/kernel/debug/clk/clk_summary
     uart_serial           1            2    80000000          0 0
           uart           1            2    66000000          0 0

    This patch balances the calls of prepares. The result is:

    $  grep uart /sys/kernel/debug/clk/clk_summary
     uart_serial           1            1    80000000          0 0
           uart           1            1    66000000          0 0

    Cc: Fabio Estevam <festevam@gmail.com>
    Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Cc: Jiri Slaby <jslaby@suse.com>
    Cc: linux-serial at vger.kernel.org
    Cc: linux-pm at vger.kernel.org
    Cc: linux-kernel at vger.kernel.org
    Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2015-07-22 14:05 Chunfeng Yun
  0 siblings, 0 replies; 335+ messages in thread
From: Chunfeng Yun @ 2015-07-22 14:05 UTC (permalink / raw)
  To: linux-arm-kernel

>From ac1e8724bfa47494223bad0af450c1a63cd2fe0c Mon Sep 17 00:00:00 2001
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
Date: Wed, 22 Jul 2015 21:15:15 +0800
Subject: [PATCH 0/5] *** SUBJECT HERE ***

The patch supports MediaTek's xHCI controller.

There are some differences from xHCI spec:
1. The interval is specified in 250 * 8ns increments for Interrupt Moderation
Interval(IMODI) of the Interrupter Moderation(IMOD) register, it is 8 times as
much as that defined in xHCI spec.

2. For the value of TD Size in Normal TRB, MTK's xHCI controller defines a
number of packets that remain to be transferred for a TD after processing all
Max packets in all previous TRBs,that means don't include the current TRB's,
but in xHCI spec it includes the current ones.

3. To minimize the scheduling effort for synchronous endpoints in xHC, the MTK
architecture defines some extra SW scheduling parameters for HW. According to
these parameters provided by SW, the xHC can easily decide whether a
synchronous endpoint should be scheduled in a specific uFrame. The extra SW
scheduling parameters are put into reserved DWs in Slot and Endpoint Context.
And a bandwidth scheduler algorithm is added to support such feature.

A usb3.0 phy driver is also added which used by mt65xx SoCs platform, it
supports two usb2.0 ports and one usb3.0 port.

Change in v3:
1. implement generic phy
2. move opperations for IPPC and wakeup from phy driver to xHCI driver
3. seperate quirk functions into a single C file to fix up dependence issue

Chunfeng Yun (5):
  dt-bindings: Add usb3.0 phy binding for MT65xx SoCs
  dt-bindings: Add a binding for Mediatek xHCI host controller
  usb: phy: add usb3.0 phy driver for mt65xx SoCs
  xhci: mediatek: support MTK xHCI host controller
  arm64: dts: mediatek: add xHCI & usb phy for mt8173

 .../devicetree/bindings/phy/phy-mt65xx-u3.txt      |  21 +
 .../devicetree/bindings/usb/mt8173-xhci.txt        |  50 ++
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts        |  15 +
 arch/arm64/boot/dts/mediatek/mt8173.dtsi           |  31 +
 drivers/phy/Kconfig                                |   9 +
 drivers/phy/Makefile                               |   1 +
 drivers/phy/phy-mt65xx-usb3.c                      | 426 +++++++++++
 drivers/usb/host/Kconfig                           |   9 +
 drivers/usb/host/Makefile                          |   4 +
 drivers/usb/host/xhci-mtk-sch.c                    | 436 +++++++++++
 drivers/usb/host/xhci-mtk.c                        | 836 +++++++++++++++++++++
 drivers/usb/host/xhci-mtk.h                        | 135 ++++
 drivers/usb/host/xhci-ring.c                       |  35 +-
 drivers/usb/host/xhci.c                            |  19 +-
 drivers/usb/host/xhci.h                            |   1 +
 15 files changed, 2021 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-mt65xx-u3.txt
 create mode 100644 Documentation/devicetree/bindings/usb/mt8173-xhci.txt
 create mode 100644 drivers/phy/phy-mt65xx-usb3.c
 create mode 100644 drivers/usb/host/xhci-mtk-sch.c
 create mode 100644 drivers/usb/host/xhci-mtk.c
 create mode 100644 drivers/usb/host/xhci-mtk.h

--
1.8.1.1.dirty

In-Reply-To: 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2015-07-15  9:32 Yuan Yao
  0 siblings, 0 replies; 335+ messages in thread
From: Yuan Yao @ 2015-07-15  9:32 UTC (permalink / raw)
  To: linux-arm-kernel

This patch has been tested on Fresscale LS-1 SOCs.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2015-05-18 20:00 raghu MG
  0 siblings, 0 replies; 335+ messages in thread
From: raghu MG @ 2015-05-18 20:00 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,
This mail is regarding Linux smp boot on ARMADA-XP MV2860
.

CPU-1 doesnt boot/go through the boot sequence & it fails to come
online & dumps this message

CPU1:failed to come online .

The CPU-1 boot register is programmed with physical address of
-->armada_xp_secondary_startup function & then cpu-0 deasserts the CPU-1.

I am using armada-xp-gp.dts with armada-xp-mv78260.dts included in it.

Any help would be appreciated.
Regards

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2015-04-21 10:18 Ard Biesheuvel
  0 siblings, 0 replies; 335+ messages in thread
From: Ard Biesheuvel @ 2015-04-21 10:18 UTC (permalink / raw)
  To: linux-arm-kernel

On 21 April 2015 at 12:13, Russell King - ARM Linux
<linux@arm.linux.org.uk> wrote:
> On Tue, Apr 21, 2015 at 12:08:51PM +0200, Ard Biesheuvel wrote:
>> This updates the PROCINFO offset-to-setup-function fields of the
>> Thumb2 capable CPU definitions to include the Thumb bit when building
>> a Thumb2 kernel. This ensures that these function are always called
>> in the correct mode.
>
> I don't think this is necessary, in fact, I think this is positively
> regression causing.
>
> The symbol 'initfunc' is known to the assembler to be a thumb symbol.
> As we have seen already from the kernel dumps from the V7M kernel, when
> it calculates initfunc - name in a T2 kernel, the resulting value is an
> _odd_ number.
>

OK, so BSYM() uses '+ 1' rather than ' | 1'? I wasn't expecting that, sorry.

But looking at proc-v7.S again, the problem may just be the missing
ENDPROC() declarations for a couple of the setup() functions, which
explains why they are lacking the Thumb annotations.

> Using BSYM() here will increment it to be the next _even_ number, which
> is wrong as this will potentially point at either half way through a
> 32-bit T2 instruction, or the second 16-bit T2 instruction.
>

Agreed.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2015-03-30  4:56 Woody Wu
  0 siblings, 0 replies; 335+ messages in thread
From: Woody Wu @ 2015-03-30  4:56 UTC (permalink / raw)
  To: kernelnewbies

Hi,

I have a kernel already run on production, but I then realized that I need
to add one or two driver to it.  But I hope I can avoid to upgrade the
kernel image for those already running products, I hope I can only extend
the kernel by add the driver modules to the root file system. Is that
possible? The current kernel has already compiled with the loadable modules
options, but for the drivers that I want now the old config is 'no'.

Thanks in advance.
-woody


-- 
Sent from Gmail Mobile
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20150330/28819756/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2015-02-26 16:56 Jorge Ramirez-Ortiz
  0 siblings, 0 replies; 335+ messages in thread
From: Jorge Ramirez-Ortiz @ 2015-02-26 16:56 UTC (permalink / raw)
  To: linux-arm-kernel

From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Subject: [PATCH v5] drivers/tty: amba: defer probing DMA availability until hw_init
In-Reply-To: [PATCH v4] drivers/tty: amba: defer probing DMA availability until hw_init

checkpatch.pl didn't catch 'struct device * const uap_dev' 
resending 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2015-02-18 16:14 Lee Jones
  0 siblings, 0 replies; 335+ messages in thread
From: Lee Jones @ 2015-02-18 16:14 UTC (permalink / raw)
  To: linux-arm-kernel

Subject: [PATCH v2 0/4] clk: st: New clock domain

v1 => v2:
  - Turned the ST specific driver into a generic one 

Hardware can have a bunch of clocks which must not be turned off.
If drivers a) fail to obtain a reference to any of these or b) give
up a previously obtained reference during suspend, the common clk
framework will attempt to turn them off and the hardware will
subsequently die.  The only way to recover from this failure is to
restart.
 
To avoid either of these two scenarios from catastrophically
disabling the running system we have implemented a clock domain
where clocks are consumed and references are taken, thus preventing
them from being shut down by the framework.

Lee Jones (4):
  ARM: sti: stih407-family: Supply defines for CLOCKGEN A0
  ARM: sti: stih407-family: Provide Clock Domain information
  clk: Provide an always-on clock domain framework
  clk: dt: Introduce always-on clock domain documentation

 .../devicetree/bindings/clock/clk-domain.txt       | 35 ++++++++++++
 arch/arm/boot/dts/stih407-family.dtsi              | 13 +++++
 drivers/clk/Makefile                               |  1 +
 drivers/clk/clkdomain.c                            | 63 ++++++++++++++++++++++
 include/dt-bindings/clock/stih407-clks.h           |  4 ++
 5 files changed, 116 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/clk-domain.txt
 create mode 100644 drivers/clk/clkdomain.c

-- 
1.9.1

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2015-01-27 16:49 Grzegorz Dwornicki
  0 siblings, 0 replies; 335+ messages in thread
From: Grzegorz Dwornicki @ 2015-01-27 16:49 UTC (permalink / raw)
  To: kernelnewbies

Keepalive question

Hello

I am bothered with very simple situaction. Lets say we have a TCP connection:

S1 <----> S2

Lets assume that this connection is using blocking sockets. and that
both hosts: s1 and s2 are using SO_KEEPALIVE. If they both are not
using this connection then the kernel? is sending packets with no data
to keep connection alive.

I have marked "the kernel?" because I am not sure who does this. I
think its the kernel but I am not sure.

What would happen if only one of them would use keepalive? Could that
empty packet break the loop inside of sk_busy_loop function and return
empty data to the application layer? Or would that while loop body
just re-run?

Hehe is the code (the while loop starts on 128 line)
http://lxr.oss.org.cn/source/include/net/busy_poll.h?a=arm#L95

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-11-10  6:39 Libo Chen
  0 siblings, 0 replies; 335+ messages in thread
From: Libo Chen @ 2014-11-10  6:39 UTC (permalink / raw)




^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-11-10  3:11 Libo Chen
  0 siblings, 0 replies; 335+ messages in thread
From: Libo Chen @ 2014-11-10  3:11 UTC (permalink / raw)




^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-10-28 14:13 Mark Rutland
  0 siblings, 0 replies; 335+ messages in thread
From: Mark Rutland @ 2014-10-28 14:13 UTC (permalink / raw)
  To: linux-arm-kernel

Bcc:
Subject: Re: [PATCHv4 7/7] arm64: add better page protections to arm64
Reply-To:
In-Reply-To: <1414440752-9411-8-git-send-email-lauraa@codeaurora.org>

Hi Laura,

On Mon, Oct 27, 2014 at 08:12:32PM +0000, Laura Abbott wrote:
> Add page protections for arm64 similar to those in arm.
> This is for security reasons to prevent certain classes
> of exploits. The current method:
>
> - Map all memory as either RWX or RW. We round to the nearest
>   section to avoid creating page tables before everything is mapped
> - Once everything is mapped, if either end of the RWX section should
>   not be X, we split the PMD and remap as necessary
> - When initmem is to be freed, we change the permissions back to
>   RW (using stop machine if necessary to flush the TLB)
> - If CONFIG_DEBUG_RODATA is set, the read only sections are set
>   read only.
>
> Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
> ---
> v4: Combined the Kconfig options
> ---
>  arch/arm64/Kconfig.debug            |  23 +++
>  arch/arm64/include/asm/cacheflush.h |   4 +
>  arch/arm64/kernel/vmlinux.lds.S     |  17 ++
>  arch/arm64/mm/init.c                |   1 +
>  arch/arm64/mm/mm.h                  |   2 +
>  arch/arm64/mm/mmu.c                 | 303 +++++++++++++++++++++++++++++++-----
>  6 files changed, 314 insertions(+), 36 deletions(-)

With this patch applied to v3.18-rc2, my board to blows up at boot when
using UEFI (without DEBUG_RODATA selected):

---->8----
EFI stub: Booting Linux Kernel...
Initializing cgroup subsys cpu
Linux version 3.18.0-rc2+ (mark at leverpostej) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #112 SMP PREEMPT Tue Oct 28 13:58:41 GMT 2014
CPU: AArch64 Processor [410fd030] revision 0
Detected VIPT I-cache on CPU0
bootconsole [uart0] enabled
efi: Getting EFI parameters from FDT:
EFI v2.40 by ARM Juno EFI Oct  7 2014 15:05:42
efi:  ACPI=0xfebdc000  ACPI 2.0=0xfebdc014
cma: Reserved 16 MiB at fd800000
BUG: failure at arch/arm64/mm/mmu.c:234/alloc_init_pmd()!
Kernel panic - not syncing: BUG!
CPU: 0 PID: 0 Comm: swapper Not tainted 3.18.0-rc2+ #112
Call trace:
[<ffffffc000087ec8>] dump_backtrace+0x0/0x124
[<ffffffc000087ffc>] show_stack+0x10/0x1c
[<ffffffc0004ebd58>] dump_stack+0x74/0xb8
[<ffffffc0004eb018>] panic+0xe0/0x220
[<ffffffc0004e8e08>] alloc_init_pmd+0x1cc/0x1dc
[<ffffffc0004e8e3c>] alloc_init_pud+0x24/0x6c
[<ffffffc0004e8f54>] __create_mapping+0xd0/0xf0
[<ffffffc00069a0a0>] create_id_mapping+0x5c/0x68
[<ffffffc00069964c>] efi_idmap_init+0x54/0xd8
[<ffffffc0006978a8>] setup_arch+0x408/0x5c0
[<ffffffc00069566c>] start_kernel+0x94/0x3a0
---[ end Kernel panic - not syncing: BUG!
---->8----

I've not yet figured out precisely why. I haven't tried a !EFI boot
because of the way my board is set up at the moment.

Mark.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-09-22 19:41 Santosh Shilimkar
  0 siblings, 0 replies; 335+ messages in thread
From: Santosh Shilimkar @ 2014-09-22 19:41 UTC (permalink / raw)
  To: linux-arm-kernel

Subject: [GIT PULL] ARM: dts: Keystone DTS updates for 3.18

Hi Arm-soc folks,

The following changes since commit 7d1311b93e58ed55f3a31cc8f94c4b8fe988a2b9:

  Linux 3.17-rc1 (2014-08-16 10:40:26 -0600)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git tags/keystone-dts

for you to fetch changes up to b2ed7d98e1c7098f452cf95ab69211a2f8e02ac8:

  ARM: dts: keystone: fix bindings for pcie and usb clock nodes (2014-09-22 15:19:36 -0400)

----------------------------------------------------------------
Keystone DTS updates for v3.18

- Add IRQ and GPIO nodes
- Fix SPI chip select
- Fix usb and pcie clock nodes

----------------------------------------------------------------
Grygorii Strashko (2):
      ARM: dts: keystone: add keystone irq controller node
      ARM: dts: keystone: add dsp gpio controllers nodes

Karicheri Muralidharan (1):
      ARM: dts: keystone: k2l: Fix chip selects for SPI devices

Karicheri, Muralidharan (1):
      ARM: dts: keystone: fix bindings for pcie and usb clock nodes

 arch/arm/boot/dts/k2e-clocks.dtsi |    6 ++--
 arch/arm/boot/dts/k2e.dtsi        |    7 +++++
 arch/arm/boot/dts/k2hk.dtsi       |   56 +++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/k2l.dtsi        |   42 ++++++++++++++++++++++++++++
 arch/arm/boot/dts/keystone.dtsi   |    8 ++++++
 5 files changed, 116 insertions(+), 3 deletions(-)

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-09-22  7:45 Jingchang Lu
  0 siblings, 0 replies; 335+ messages in thread
From: Jingchang Lu @ 2014-09-22  7:45 UTC (permalink / raw)
  To: linux-arm-kernel

This series contain the support for Freescale LS1021A CPU and LS1021A-QDS
and LS1021A-TWR board.

The LS1021A SoC combines two ARM Cortex-A7 cores that have been optimized
for high reliability and pack the highest level of integration available
for sub-3W embedded communications processors and with a comprehensive
enablement model focused on ease of programmability.

The LS1021A SoC shares IPs with i.MX family, Vybrid family and Freescale
PowerPC platform. 

For the detail information about LS1021A SoC, please refer to the RM doc.

---
changes in v4:
add "syscon" compatible to device tree scfg and dcfg node, and 
remove uncompleted dcsr related node.
remove mxc_restart reference in DT_MACHINE_START.
remove dma_zone_size defination in DT_MACHINE_START.

changes in v3:
rewrite scfg and dcfg binding doc description.
remove sai related node leaving to the driver support.

changes in v2:
remove unused nodes.
wakeup the secondary core by IPI call to u-boot standby procedure. 
add dt-bindings for LS1021A SoC and platform gerenal configuration nodes.

----------------------------------------------------------------
Jingchang Lu (6):
	ARM: dts: Add SoC level device tree support for LS1021A
	ARM: dts: Add initial LS1021A QDS board dts support
	ARM: dts: Add initial LS1021A TWR board dts support
	dt-bindings: arm: add Freescale LS1021A SoC device tree binding
	ARM: imx: Add initial support for Freescale LS1021A
	ARM: imx: Add Freescale LS1021A SMP support

 Documentation/devicetree/bindings/arm/fsl.txt |  38 ++++
 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/ls1021a-qds.dts             | 285 ++++++++++++++++++++++++++
 arch/arm/boot/dts/ls1021a-twr.dts             | 117 +++++++++++
 arch/arm/boot/dts/ls1021a.dtsi                | 539 ++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-imx/Kconfig                     |  14 ++
 arch/arm/mach-imx/Makefile                    |   4 +-
 arch/arm/mach-imx/common.h                    |   1 +
 arch/arm/mach-imx/mach-ls1021a.c              |  22 +++
 arch/arm/mach-imx/platsmp.c                   |  32 +++
 10 files changed, 1053 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/ls1021a-qds.dts
 create mode 100755 arch/arm/boot/dts/ls1021a-twr.dts
 create mode 100644 arch/arm/boot/dts/ls1021a.dtsi
 create mode 100644 arch/arm/mach-imx/mach-ls1021a.c

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-09-13 19:40 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2014-09-13 19:40 UTC (permalink / raw)
  To: ath9k-devel

but how does the device decide to wake up?  Is it based on local TSF and
beacon interval being programmed in somewhere?  Or do you give it an arbitrary
TSF wake-up time somehow as in the previous devices?  I noticed that in ath9k
the various generic timer aliases (e.g. TIM_TIMER) aren't even supported in
ar9003_mac.c.

-- 
Bob Copeland %% http://bobcopeland.com/

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-09-13 19:40 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2014-09-13 19:40 UTC (permalink / raw)
  To: ath9k-devel

apply patches to the ath.git tree as before and handle the patches from
there.

For ath9k and wil6210 the change is that I will be commiting the patches
instead of John and I will apply them to my wireless-drivers trees:

https://git.kernel.org/cgit/linux/kernel/git/kvalo/wireless-drivers.git/

https://git.kernel.org/cgit/linux/kernel/git/kvalo/wireless-drivers-next.git/

For ath10k and ath6kl related work I will continue to use my QCA email
address but for wireless-drivers maintainer duties I will use CAF
address.

Please let me know if there any questions. Me and John try to make this
transition as smooth as possible.

Kalle

"John W. Linville" <linville@tuxdriver.com> writes:

> Greetings,
>
> Almost 9 years ago, Jeff Garzik wrote a message on LKML detailing
> the sad state of wireless LANs in the Linux world.  The point of his
> message was "So... there it is.  We suck.  There's hope.  No Luke
> Skywalker in sight.":
>
> 	https://lkml.org/lkml/2006/1/5/671
>
> Shortly thereafter, I became the maintainer for wireless LANs in the
> Linux kernel:
>
> 	https://lkml.org/lkml/2006/1/18/377
>
> Since then, we have had a number of wireless summit meetings all around
> the world.  Items were discussed, patches were merged, and friendships
> were made.  Over time, we garnered support from a large range of
> wireless networking vendors.  Eventually even other technologies
> were sending their patches through my trees, and I was consistently
> ranked amongst the top 10 "gate keepers" for getting changes into the
> Linux kernel.  In fact, a couple of years ago I even gave a talk on
> how Linux wireless got better.	It has been quite a ride!
>
> 	https://events.linuxfoundation.org/images/stories/pdf/lfcs2012_linville.pdf
>
> Nevertheless, I think it is time for some changes.  I have been
> the wireless maintainer for a long time, and I personally would
> like to develop in a different direction.  Plus, I think that Linux
> will benefit from having some fresh blood involved in more of the
> maintenance duties.  I will be stepping aside to let that happen.
>
> The mac80211, bluetooth, and nfc trees have fed through me for some
> time.  I am now asking these trees to send pull request directly to
> David Miller.  Since these trees are managed through git, my hope is
> that they will not place any significant burden on Dave.
>
> As for the wireless driver patches, I have asked Kalle Valo
> to handle patch review and merge duties for everything under the
> drivers/net/wireless directory.  This will now include not only the ath
> patches he already manages, but other drivers that don't have trees
> such as mwifiex, rt2x00, rtlwifi, and others.  For consistency, the
> iwlwifi tree will also be merged through Kalle's new tree.  I expect
> that Kalle will announce any relevant details in a follow-up message.
>
> The wireless-testing tree is a resource that some people value.
> I will continue to provide a wireless-testing tree.  Now that tree
> will feed from the various wireless trees managed by others, probably
> with some sort of regularly scheduled pulls.  Details are still to be
> determined, but the tree will still exist and will be substantially
> similar to how it has been so far.
>
> I also receive notices of new bug reports for wireless LANs on
> bugzilla.kernel.org.  For now I will continue to triage those reports,
> so don't ignore me!! :-)
>
> Some may ask what I will do now -- I wish I had a specific answer.
> Immediate plans are to enjoy the coming holidays and my traditional
> year-end time away from work.  After that...well, I'm sure I will
> find something to do.  If you have any suggestions for good uses of
> my talents, feel free to contact me -- I'm not hard to find!
>
> In closing, I hope everyone will support Kalle and the other wireless
> maintainers at least as much as you have supported me for the past
> several years.	These are good, hard working folks.  You are in
> good hands!
>
> Regards,
>
> John
>
> P.S.  Bonus points for anyone that finds a way for me to become a
> professional retro-computing hobbyist... :-)

-- 
Kalle Valo

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-09-13 19:40 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2014-09-13 19:40 UTC (permalink / raw)
  To: ath9k-devel

I think WOW-enabled cards require hardware changes from the
base reference design (in your case WB222/AR9462), to receive
power when suspended.

Sujith

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-09-13 19:40 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2014-09-13 19:40 UTC (permalink / raw)
  To: ath9k-devel

It doesn't appear to be present in the kernel and I don't think
ath3k would be loaded.

I have a patch to add this ID to ath3k, can you apply it in
backports-20141221 and check ?

http://msujith.org/dir/patches/wl/Jan-14-2015/0013-ath3k-Add-new-AR3012-device.patch

Inside backports:

patch -p1 < 0013-ath3k-Add-new-AR3012-device.patch

And then, do a "make menuconfig" to select ath9k/ath3k
and install.

Sujith

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-09-13 19:40 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2014-09-13 19:40 UTC (permalink / raw)
  To: ath9k-devel

phyXtpt to blink like what it does.<br>
<span class=3D"HOEnZb"><font color=3D"#888888"><br>
Hong<br>
</font></span></blockquote></div><br><br clear=3D"all"><br>-- <br><div clas=
s=3D"gmail_signature">Met vriendelijk groeten,<br>Melroy van den Berg</div>
</div>

--001a113801d2d4fad5050c853d75--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-08-29 14:22 Ravi Raj
  2014-08-29 14:47 ` Valdis.Kletnieks at vt.edu
  0 siblings, 1 reply; 335+ messages in thread
From: Ravi Raj @ 2014-08-29 14:22 UTC (permalink / raw)
  To: kernelnewbies

Hii Guys,
               I am an Embedded firmware Developer,I am looking for a
Development board to port the linux kernal from scratch, could you guys
please recommend me a good development board were i can port linux from
scratch.











Cheers,
Ravi.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20140829/37cc0503/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-07-09 17:49 Sebastian Andrzej Siewior
  0 siblings, 0 replies; 335+ messages in thread
From: Sebastian Andrzej Siewior @ 2014-07-09 17:49 UTC (permalink / raw)
  To: linux-arm-kernel

This is version three of the patch set. Unless something serious comes up
I would drop the RFC on the next post.

So far I should have everything covered up comparing to the omap-serial
driver except for the throttle callbacks. And now I would slowly start
looking into DMA support?

Sebastian

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-05-24  1:21 Loc Ho
  0 siblings, 0 replies; 335+ messages in thread
From: Loc Ho @ 2014-05-24  1:21 UTC (permalink / raw)
  To: linux-arm-kernel

This patch adds support for the APM X-Gene SoC EDAC driver.

v2:
* Add EDAC entry in MAINTAINERS for APM EDAC driver
* Remove the MC scrub patch
* Remove the word 'Caches' from Kconfig
* Change all MASK defines to use BIT(x)
* Update comment or remove them
* Wrap error injection code around CONFIG_EDAC_DEBUG
* Change function name xgene_edac_mc_hw_init to xgene_edac_mc_irq_ctl
* Change all function XXX_hw_init to XXX_hw_ctl
* Fix typo 'activie'
* Move calling function edac_mc_alloc after resource retrieval
* Check for NULL on platform_get_resource return if reference directly
* Add documentation for struct xgene_edac_pmd_ctx
* Move L1 and L2 check out of function xgene_edac_pmd_check to its own
  functions
* Use for loop for configure each CPU of an PMD
* Replace /2 by >> 1
* Remove unnecessary comment on edac_device_add_device failure
* Make mem_err_ip static const
* Unwind EDAC register correctly if failed
---
Loc Ho (4):
  MAINTAINERS: Add entry for APM X-Gene SoC EDAC driver
  Documentation: Add documentation for the APM X-Gene SoC EDAC DTS
    binding
  edac: Add APM X-Gene SoC EDAC driver
  arm64: Add APM X-Gene SoC EDAC DTS entries

 .../devicetree/bindings/edac/apm-xgene-edac.txt    |   70 +
 MAINTAINERS                                        |    8 +
 arch/arm64/boot/dts/apm-storm.dtsi                 |   89 +
 drivers/edac/Kconfig                               |    9 +-
 drivers/edac/Makefile                              |    3 +
 drivers/edac/xgene_edac.c                          | 1993 ++++++++++++++++++++
 6 files changed, 2171 insertions(+), 1 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
 create mode 100644 drivers/edac/xgene_edac.c

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-05-12 16:40 Santosh Shilimkar
  0 siblings, 0 replies; 335+ messages in thread
From: Santosh Shilimkar @ 2014-05-12 16:40 UTC (permalink / raw)
  To: linux-arm-kernel

>From 14f3791439b5a6cf12127fb80204265533d92664 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Mon, 12 May 2014 12:28:23 -0400
Subject: [GIT PULL 1/2] ARM: Keystone SOC updates for 3.16

Hi Arm-soc folks,

Please pull below keystone SOC updates for 3.16. It merges cleanly with
arm-soc 'next/soc' head. As already discussed, the $subject pull request
has a depedency with DT dma-properties pull request [1] I sent last week
to be pulled into arm-soc.

The following changes since commit c9eaa447e77efe77b7fa4c953bd62de8297fd6c5:

  Linux 3.15-rc1 (2014-04-13 14:18:35 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git tags/keystone-soc

for you to fetch changes up to 14f3791439b5a6cf12127fb80204265533d92664:

  ARM: keystone: Update the dma offset for non-dt platform devices (2014-05-08 15:43:33 -0400)

----------------------------------------------------------------
Keystone SOC updates for 3.16

- Drop unused COMMON_CLK_DEBUG option
- Enable MTD_SPI_NOR config needed for M25P80
- Enable coherent higher address memory space

----------------------------------------------------------------
Brian Norris (1):
      ARM: configs: keystone: add MTD_SPI_NOR (new dependency for M25P80)

Lad Prabhakar (1):
      ARM: configs: keystone: drop CONFIG_COMMON_CLK_DEBUG

Santosh Shilimkar (2):
      ARM: keystone: Switch over to coherent memory address space
      ARM: keystone: Update the dma offset for non-dt platform devices

 arch/arm/configs/integrator_defconfig   |    1 -
 arch/arm/configs/keystone_defconfig     |    2 +-
 arch/arm/configs/sunxi_defconfig        |    1 -
 arch/arm/configs/vt8500_v6_v7_defconfig |    1 -
 arch/arm/mach-keystone/keystone.c       |   74 +++++++++++++++++++++++++++++++
 arch/arm/mach-keystone/memory.h         |   24 ++++++++++
 arch/arm/mach-keystone/platsmp.c        |   18 +++++++-
 7 files changed, 116 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/mach-keystone/memory.h

Regards,
Santosh

[1] https://lkml.org/lkml/2014/5/7/368

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-05-12 16:38 Santosh Shilimkar
  0 siblings, 0 replies; 335+ messages in thread
From: Santosh Shilimkar @ 2014-05-12 16:38 UTC (permalink / raw)
  To: linux-arm-kernel

>From 14f3791439b5a6cf12127fb80204265533d92664 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Mon, 12 May 2014 12:28:23 -0400
Subject: [GIT PULL 1/2] ARM: Keystone SOC updates for 3.16

Hi Arm-soc folks,

Please pull below keystone SOC updates for 3.16. It merges cleanly with
arm-soc 'next/soc' head. As already discussed, the $subject pull request
has a depedency with DT dma-properties pull request [1] I sent last week
to be pulled into arm-soc.

The following changes since commit c9eaa447e77efe77b7fa4c953bd62de8297fd6c5:

  Linux 3.15-rc1 (2014-04-13 14:18:35 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git tags/keystone-soc

for you to fetch changes up to 14f3791439b5a6cf12127fb80204265533d92664:

  ARM: keystone: Update the dma offset for non-dt platform devices (2014-05-08 15:43:33 -0400)

----------------------------------------------------------------
Keystone SOC updates for 3.16

- Drop unused COMMON_CLK_DEBUG option
- Enable MTD_SPI_NOR config needed for M25P80
- Enable coherent higher address memory space

----------------------------------------------------------------
Brian Norris (1):
      ARM: configs: keystone: add MTD_SPI_NOR (new dependency for M25P80)

Lad Prabhakar (1):
      ARM: configs: keystone: drop CONFIG_COMMON_CLK_DEBUG

Santosh Shilimkar (2):
      ARM: keystone: Switch over to coherent memory address space
      ARM: keystone: Update the dma offset for non-dt platform devices

 arch/arm/configs/integrator_defconfig   |    1 -
 arch/arm/configs/keystone_defconfig     |    2 +-
 arch/arm/configs/sunxi_defconfig        |    1 -
 arch/arm/configs/vt8500_v6_v7_defconfig |    1 -
 arch/arm/mach-keystone/keystone.c       |   74 +++++++++++++++++++++++++++++++
 arch/arm/mach-keystone/memory.h         |   24 ++++++++++
 arch/arm/mach-keystone/platsmp.c        |   18 +++++++-
 7 files changed, 116 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/mach-keystone/memory.h

Regards,
Santosh

[1] https://lkml.org/lkml/2014/5/7/368

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-05-12  4:37 Sivakumar V
  0 siblings, 0 replies; 335+ messages in thread
From: Sivakumar V @ 2014-05-12  4:37 UTC (permalink / raw)
  To: kernelnewbies

Hi All,

    I am tried to compile and install (network file system)nfs module to
kernel i.e. modified nfs code(inserted printk's in kernel nfs code) without
compiling entire kernel .
It is inserted but when configuring nfs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20140512/d8b76c77/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-04-21  2:59 Amber Thrall
  0 siblings, 0 replies; 335+ messages in thread
From: Amber Thrall @ 2014-04-21  2:59 UTC (permalink / raw)
  To: kernelnewbies

I recently built and installed kernel version 3.15.0-rc1 following the
KernelBuild article on kernelnewbies.org.  Everything went smooth and my
system is running fine.  However when performing an update via (sudo yum
update) the dependencies failed requiring
"kernel-devel-uname-r=3.13.10".  uname-r returns "3.15.0-rc1" as
expected.

Is there a way to get yum to recognize the latest kernel I built?  Or
does that require updating the kernel's source RPM?

I'm running Fedora 20 and am new to kernel building.  Yum's error
message is included below:

Error: Package:
10:buildsys-build-rpmfusion-kerneldevpkgs-current-20-19.x86_64
(rpmfusion-free-updates)
           Requires: kernel-devel-uname-r = 3.13.10-200.fc20.x86_64
           Installed: kernel-devel-3.11.10-301.fc20.x86_64 (@anaconda)
               kernel-devel-uname-r = 3.11.10-301.fc20.x86_64
           Installed: kernel-devel-3.13.9-200.fc20.x86_64 (@updates)
               kernel-devel-uname-r = 3.13.9-200.fc20.x86_64
 You could try using --skip-broken to work around the problem
 You could try running: rpm -Va --nofiles --nodigest

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-02-22 15:53 Hans de Goede
  0 siblings, 0 replies; 335+ messages in thread
From: Hans de Goede @ 2014-02-22 15:53 UTC (permalink / raw)
  To: linux-arm-kernel

Hi all,

Here is v7 of my patchset for adding ahci-sunxi support. This is hopefully
the final final version of this set :)

Note I'm going on vacation for a week starting Monday, so if I'm not responding
that is why. Tejun if you feel some small cleanups are still necessary and
you don't want to wait for me to get back feel free to squash in any cleanups
you deem necessary.

This has been tested with Allwinner A10, Allwinner A20 and Freeware imx6x SoCs,
including suspend / resume. Note that the ahci_imx driver now also has imx53
sata support, it would be good if someone could test that with this series.


History:

v1, by Olliver Schinagl:
This was using the approach of having a platform device which probe method
creates a new child platform device which gets driven by ahci_platform.c,
as done by ahci_imx.c .

v2, by Hans de Goede:
Stand-alone platform driver based on Olliver's work

v3, by Hans de Goede:
patch-series, with 4 different parts
a) Make ahci_platform.c more generic, handle more then 1 clk, target pwr
   regulator
b) New ahci-sunxi code only populating ahci_platform_data, passed to
   ahci_platform.c to of_device_id matching.
c) Refactor ahci-imx code to work the same as the new ahci-sunxi code, this
   is the reason why v3 is an RFC, I'm waiting for the wandboard I ordered to
   arrive so that I can actually test this.
d) dts bindings for the sunxi ahci parts

v4, by Hans de Goede:
patch-series, with 5 different parts:
a) Make ahci_platform.c more generic, handle more then 1 clk, target pwr
   regulator
b) Turn parts of ahci_platform.c into a library for use by other drivers
c) New ahci-sunxi driver using the ahci_platform.c library functionality
d) Refactor ahci-imx code to work the same as the new ahci-sunxi code
e) dts bindings for the sunxi ahci parts

v5:
v4 + the following changes:
1) fsl,imx6q driver is now tested
2) fixed suspend / resume on fsl,imx6q
3) Modifed devicetree node naming to match dt spec
4) Reworked the busy waiting code in the sunxi-phy handling as suggested by
   Russell King

v6:
v5 rebased on top of 3.14-rc3 + the following changes
1) Added Roger Quadros' generic phy support series
2) Added a "ARM: sun4i: dt: Remove grouping + simple-bus for regulators" dts
   patch

v7:
v6 + the following changes:
1) Addressed all Tejun's review remarks:
  * Added function header comments to all exported ahci_platform functions
  * Added comments in some other places
  * Removed use of 2 empty lines to separate functions in some cases
  * Use devres to automatically call ahci_platform_put_resources on
    get_resource failure, probe failure and regular device remove
2) Dropped patches to move ahci_host_priv struct declaration to include/linux,
  this was a left-over from v3 and is no longer necessary
3) Updated Roger's "ata: ahci_platform: Manage SATA PHY" patch:
  * Update function header comments for the changes this makes
  * Drop the Kconfig PHY requires hack, my patch for the phy-core to always be
    built-in has been queued in Greg KH's tree, so this is no longer necessary.
4) Dropped Roger's "ata: ahci_platform: Add 'struct device' argument to ahci_platform_put_resources()"
  patch, ahci_platform_put_resources already has a device argument as result
  of it being changed into a devres release function

Tejun, can you please add patches 1-12 to your ata tree for 3.15 ?

Maxime, can you please add patch 13-15 to your dts tree for 3.15 ?

Thanks & Regards,

Hans

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-01-21  4:09 John Tobias
  0 siblings, 0 replies; 335+ messages in thread
From: John Tobias @ 2014-01-21  4:09 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Guys,

Just wondering if you encountered the error below and if there's any
existing patch?.

Regards,

john



[  860.354231] Unable to handle kernel paging request at virtual
address eaffff9d
[  860.361466] pgd = bf190000
[  860.364177] [eaffff9d] *pgd=00000000
[  860.367773] Internal error: Oops: 5 [#1] ARM
[  860.372048] Modules linked in: bt8xxx(O) sd8xxx(O) mlan(O)
[  860.377597] CPU: 0 PID: 82 Comm: ksdioirqd/mmc1 Tainted: G
 O 3.13.0-rc1 #1
[  860.385344] task: bf05c280 ti: bf01a000 task.ti: bf01a000
[  860.390756] PC is at mmc_io_rw_extended+0x38/0x310
[  860.395552] LR is at mmc_io_rw_extended+0x38/0x310
[  860.400346] pc : [<80319b68>]    lr : [<80319b68>]    psr: 400f0013
[  860.400346] sp : bf01bc90  ip : bf01bd60  fp : bf01bd8c
[  860.411824] r10: 806f9748  r9 : bf9e7800  r8 : eb075fb4
[  860.417051] r7 : eaffff9d  r6 : 80327c24  r5 : 1a000009  r4 : 00000007
[  860.423580] r3 : 00000000  r2 : ffffffc4  r1 : 00000000  r0 : bf01bd1c
[  860.430112] Flags: nZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM
Segment kernel
[  860.437423] Control: 10c53c7d  Table: bf190059  DAC: 00000015
[  860.443172] Process ksdioirqd/mmc1 (pid: 82, stack limit = 0xbf01a238)
[  860.449702] Stack: (0xbf01bc90 to 0xbf01c000)
[  860.454065] bc80:                                     80319e04
00000440 00000139 00000000
[  860.462246] bca0: 00000139 00000000 817de8c2 000000c0 00000700
beac60c0 3b9aca00 00000000
[  860.470427] bcc0: 00000100 00000007 00000000 00000200 00000700
00000000 bf01bd1c 00000001
[  860.478609] bce0: bf01bca8 00000000 00000035 1a001207 00002000
00000000 00000000 00000000
[  860.486790] bd00: 000001b5 00000000 00000000 00000000 00000000
bf01bcb8 bf01bd1c 00000000
[  860.494971] bd20: 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000
[  860.503153] bd40: 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000
[  860.511334] bd60: bf01bd94 bf01bd70 80324254 80327c24 bf01be04
bf9e7800 806f9748 b600003f
[  860.519515] bd80: bf01bdd4 bf01bd90 8031ade8 80319b3c bf01be04
80327c24 00000007 1a000009
[  860.527697] bda0: bf05c280 000001ff 00100100 bfb52000 00000100
00000007 beac60c0 00010009
[  860.535878] bdc0: 7f03e578 c0adb000 bf01bdec bf01bdd8 8031aef8
8031ad10 beac60c0 00000700
[  860.544059] bde0: bf01be14 bf01bdf0 7f08c2bc 8031aee0 00000000
00000009 00000700 7f03d328
[  860.552240] be00: bfad9a00 00000000 bf01be24 bf01be18 7f0622f0
7f08c278 bf01be6c bf01be28
[  860.560422] be20: 7f0137a8 7f0622ec bf01be44 bf01be38 8004efd4
00000001 bf01be5c 00000000
[  860.568603] be40: 804fc960 c0adb000 c0adbce4 7f03d328 00000000
7f03e578 7f061dec bfb52000
[  860.576784] be60: bf01beac bf01be70 7f001e68 7f0134f8 00000000
00000000 00000000 00000000
[  860.584965] be80: 00000000 bfb52000 7f09a0d4 bfb51800 00000000
bf9e7800 bf01a000 00000001
[  860.593146] bea0: bf01bec4 bf01beb0 7f05a138 7f001ce0 00000001
00000000 bf01bed4 bf01bec8
[  860.601327] bec0: 7f08bfe4 7f05a0cc bf01bf24 bf01bed8 8031ba0c
7f08bfc4 00000000 bf01bef3
[  860.609509] bee0: bfb51800 00000001 bf9e7bb4 7fffffff 0215d9c0
00000001 8031b874 00000000
[  860.617690] bf00: bf15d9c0 bf9e7800 8031b874 00000000 00000000
00000000 bf01bfac bf01bf28
[  860.625871] bf20: 8003c7e8 8031b880 bf01bf44 00000000 8004efd4
bf9e7800 00000000 00000001
[  860.634052] bf40: dead4ead ffffffff ffffffff 80702208 00000000
00000000 80600be8 bf01bf5c
[  860.642233] bf60: bf01bf5c 00000000 00000001 dead4ead ffffffff
ffffffff 80702208 00000000
[  860.650415] bf80: 00000000 80600be8 bf01bf88 bf01bf88 bf15d9c0
8003c724 00000000 00000000
[  860.658595] bfa0: 00000000 bf01bfb0 8000f308 8003c730 00000000
00000000 00000000 00000000
[  860.666776] bfc0: 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000
[  860.674956] bfe0: 00000000 00000000 00000000 00000000 00000013
00000000 00000000 00000000
[  860.683133] Backtrace:
[  860.685607] [<80319b30>] (mmc_io_rw_extended+0x0/0x310) from
[<8031ade8>] (sdio_io_rw_ext_helper+0xe4/0x1a4)
[  860.695442] [<8031ad04>] (sdio_io_rw_ext_helper+0x0/0x1a4) from
[<8031aef8>] (sdio_readsb+0x24/0x2c)
[  860.704676] [<8031aed4>] (sdio_readsb+0x0/0x2c) from [<7f08c2bc>]
(woal_read_data_sync+0x50/0x8c [sd8xxx])
[  860.714455] [<7f08c26c>] (woal_read_data_sync+0x0/0x8c [sd8xxx])
from [<7f0622f0>] (moal_read_data_sync+0x10/0x14 [sd8xxx])
[  860.725586]  r8:00000000 r7:bfad9a00 r6:7f03d328 r5:00000700 r4:00000009
r3:00000000
[  860.733603] [<7f0622e0>] (moal_read_data_sync+0x0/0x14 [sd8xxx])
from [<7f0137a8>] (wlan_process_int_status+0x2bc/0x928 [mlan])
[  860.745139] [<7f0134ec>] (wlan_process_int_status+0x0/0x928 [mlan])
from [<7f001e68>] (mlan_main_process+0x194/0x750 [mlan])
[  860.756436] [<7f001cd4>] (mlan_main_process+0x0/0x750 [mlan]) from
[<7f05a138>] (woal_interrupt+0x78/0x94 [sd8xxx])
[  860.766982] [<7f05a0c0>] (woal_interrupt+0x0/0x94 [sd8xxx]) from
[<7f08bfe4>] (woal_sdio_interrupt+0x2c/0x30 [sd8xxx])
[  860.777677]  r5:00000000 r4:00000001
[  860.781351] [<7f08bfb8>] (woal_sdio_interrupt+0x0/0x30 [sd8xxx])
from [<8031ba0c>] (sdio_irq_thread+0x198/0x368)
[  860.791537] [<8031b874>] (sdio_irq_thread+0x0/0x368) from
[<8003c7e8>] (kthread+0xc4/0xe0)
[  860.799814] [<8003c724>] (kthread+0x0/0xe0) from [<8000f308>]
(ret_from_fork+0x14/0x2c)
[  860.807818]  r7:00000000 r6:00000000 r5:8003c724 r4:bf15d9c0
[  860.813538] Code: e1a09003 e59b400c e59b5010 ebfc3a75 (e5973000)
[  860.819646] ---[ end trace 1920724507aeb8b4 ]---
[  860.824270] Kernel panic - not syncing: Fatal exception

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-01-16 16:11 Loc Ho
  0 siblings, 0 replies; 335+ messages in thread
From: Loc Ho @ 2014-01-16 16:11 UTC (permalink / raw)
  To: linux-arm-kernel

This patch adds support for the APM X-Gene SoC SATA host controller. In
order for the host controller to work, the corresponding PHY driver
musts also be available.

v10:
 * Update binding documentation

v9:
 * Remove ACPI/EFI include files
 * Remove the IO flush support, interrupt routine, and DTS resources
 * Remove function xgene_rd, xgene_wr, and xgene_wr_flush
 * Remove PMP support (function xgene_ahci_qc_issue, xgene_ahci_qc_prep,
   xgene_ahci_qc_fill_rtf, xgene_ahci_softreset, and xgene_ahci_do_softreset)
 * Rename function xgene_ahci_enable_phy to xgene_ahci_force_phy_rdy
 * Clean up hardreset functions
 * Require v7 of the PHY driver

v8:
 * Remove _ADDR from defines
 * Remove define MSTAWAUX_COHERENT_BYPASS_SET and
   STARAUX_COHERENT_BYPASS_SET and use direct coding
 * Remove the un-necessary check for DTS boot with built in ACPI table
 * Switch to use dma_set_mask_and_coherent for setting DMA mask
 * Remove ACPI table matching code
 * Update clock-names for sata01clk, sata23clk, and sata45clk

v7:
 * Update the clock code by toggle the clock
 * Update the DTS clock mask values due to the clock spilt between host and
   v5 of the PHY drivers

v6:
 * Update binding documentation
 * Change select PHY_XGENE_SATA to PHY_XGENE
 * Add ULL to constants
 * Change indentation and comments
 * Clean up the probe functions a bit more
 * Remove xgene_ahci_remove function
 * Add the flush register to DTS
 * Remove the interrupt-parent from DTS

v5:
 * Sync up to v3 of the PHY driver
 * Remove MSLIM wrapper functions
 * Change the memory shutdown loop to use usleep_range
 * Use devm_ioremap_resource instead devm_ioremap
 * Remove suspend/resume functions as not needed

v4:
 * Remove the ID property in DT
 * Remove the temporary PHY direct function call and use PHY function
 * Change printk to pr_debug
 * Move the IOB flush addresses into the DT
 * Remove the parameters retrieval function as no longer needed
 * Remove the header file as no longer needed
 * Require v2 patch of the SATA PHY driver. Require slightly modification
   in the Kconfig as it is moved to folder driver/phy and use Kconfig
   PHY_XGENE_SATA instead SATA_XGENE_PHY.

v3:
 * Move out the SATA PHY to another driver
 * Remove the clock-cells entry from DTS
 * Remove debug wrapper
 * Remove delay functions wrapper
 * Clean up resource and IRQ query
 * Remove query clock name
 * Switch to use dma_set_mask/dma_coherent_mask
 * Remove un-necessary devm_kfree
 * Update GPL license header to v2
 * Spilt up function xgene_ahci_hardreset
 * Spilt up function xgene_ahci_probe
 * Remove all reference of CONFIG_ARCH_MSLIM
 * Clean up chip revision code

v2:
 * Clean up file sata_xgene.c with Lindent and etc
 * Clean up file sata_xgene_serdes.c with Lindent and etc
 * Add description to each patch

v1:
 * inital version

Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Tuan Phan <tphan@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
---
Loc Ho (4):
  ata: Export required functions by APM X-Gene SATA driver
  Documentation: Add documentation for APM X-Gene SoC SATA host
    controller DTS binding
  ata: Add APM X-Gene SoC SATA host controller driver
  arm64: Add APM X-Gene SoC SATA host controller DTS entries

 .../devicetree/bindings/ata/apm-xgene.txt          |   70 +++
 arch/arm64/boot/dts/apm-storm.dtsi                 |   75 +++
 drivers/ata/Kconfig                                |    8 +
 drivers/ata/Makefile                               |    1 +
 drivers/ata/ahci.h                                 |    9 +
 drivers/ata/libahci.c                              |   16 +-
 drivers/ata/sata_xgene.c                           |  630 ++++++++++++++++++++
 7 files changed, 803 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/ata/apm-xgene.txt
 create mode 100644 drivers/ata/sata_xgene.c

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-01-16 16:09 Loc Ho
  0 siblings, 0 replies; 335+ messages in thread
From: Loc Ho @ 2014-01-16 16:09 UTC (permalink / raw)
  To: linux-arm-kernel

This patch adds support for APM X-Gene SoC 15Gbps Multi-purpose PHY. This
is the physical layer interface for the corresponding host controller. This
driver uses the new PHY generic framework posted by Kishon Vijay Abrahm.
In addition, the new PHY generic framework is patched to provide an
function to set the speed of the PHY.

v8
* Update binding documentation
* Remove XGENE_PHY_DTS and XGENE_PHY_EXT_DTS defines
* Remove support for internal clock
* Remove support for external reference CMU
* Remove the need for external reference resource DTS entry and its related
  code

v7
* Add/Update PHY CMU/lane parameters and its default values
* Rename variable enable_manual_cal to preA3Chip
* Remove function phy_rd, phy_wr, and phy_wr_flush
* Change function cmu_wr, cmu_rd, cmu_toggle1to0, cmu_clrbits, cmu_setbits,
  serdes_wr, serdes_rd, serdes_clrbits, and serdes_setbits to take context
  instead void *
* Remove function serdes_toggle1to0
* Decrease the polling time from 10ms to 1ms on CMU calibration complete
  detection
* Move all SATA specify code in function xgene_phy_hw_initialize into
  function xgene_phy_hw_init_sata
* Add usleep_range after starting summer/latch calibrations
* Add usleep_range between receiver reset (function xgene_phy_reset_rxd)
* Save and restore PHY register 31 instead writing 0 in function
  xgene_phy_gen_avg_val
* Update function xgene_phy_sata_force_gen programming sequences
* Add support to reset the receiver lane in function xgene_phy_set_speed
  if speed is 0
* Update PHY parameters in DTS per controller
* Some minor code clean up

v6
* Move PHY document to Documentation/devicetree/binding/phy
* Remove _ADDR from all register defines
* Update clock-names property for sataphy1clk, sataphy2clk, and sataphy3clk

v5
* Update DTS binding documentation
* Remove direct clock access and use clock interface instead
* Change override parameters to decimal instead hex values
* Change apm,tx-amplitude, apm,tx-pre-cursor1, apm,tx-pre-cursor2,
  apm,tx-post-cursor to be unit of uV

v4
* Update documentation with 'apm,' instead 'apm-'
* Change DTS override parameter to have 'apm,'
* Add select GENERIC_PHY to Kconfig PHY_XGENE
* Make override parameters to be pair of three values instead one
* Some minor comment and indentation changes
* Remove error register addition offset
* Add ULL to constants
* Use module_init instead subsys_initcall
* Make DTS node based on first register address
* Update override setting values

v3
* Major re-write of the code based on various review comments
* Support external clock only at the moment
* Support SATA mode only at the moment
* No UEFI support at the moment

v2
* Remove port knowledge from functions
* Make all functions static
* Remove ID completely
* Make resource requirement based on compatible type
* Rename override PHY parameters with more descriptive name
* Add override PHY parameter for per controller, per port, and per speed
* Patch the generic PHY frame to expose set_speed operation

v1
* Initial version

Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Tuan Phan <tphan@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
---
Loc Ho (4):
  PHY: Add function set_speed to generic PHY framework
  Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver
    binding documentation
  PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver
  arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries

 .../devicetree/bindings/phy/apm-xgene-phy.txt      |   79 +
 arch/arm64/boot/dts/apm-storm.dtsi                 |   75 +
 drivers/phy/Kconfig                                |    7 +
 drivers/phy/Makefile                               |    2 +
 drivers/phy/phy-core.c                             |   21 +
 drivers/phy/phy-xgene.c                            | 1793 ++++++++++++++++++++
 include/linux/phy/phy.h                            |    8 +
 7 files changed, 1985 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/apm-xgene-phy.txt
 create mode 100644 drivers/phy/phy-xgene.c

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-01-13 10:32 Lothar Waßmann
  0 siblings, 0 replies; 335+ messages in thread
From: Lothar Waßmann @ 2014-01-13 10:32 UTC (permalink / raw)
  To: linux-arm-kernel

This patchset adds support for the Ka-Ro electronics i.MX53 based
modules.
The first patch adds a new pingroup for NAND pads that is used by the
modules.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2014-01-13 10:29 Lothar Waßmann
  0 siblings, 0 replies; 335+ messages in thread
From: Lothar Waßmann @ 2014-01-13 10:29 UTC (permalink / raw)
  To: linux-arm-kernel

This patchset adds support for inverting the PWM output in hardware by
setting the POUTC bit in the PWMCR register. This feature is
controlled via the standard DT flas for PWMs.

The first patch does a minor source cleanup without any functional
change.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-12-12  7:30 Loc Ho
  0 siblings, 0 replies; 335+ messages in thread
From: Loc Ho @ 2013-12-12  7:30 UTC (permalink / raw)
  To: linux-arm-kernel

This patch adds support for APM X-Gene SoC 15Gbps Multi-purpose PHY. This
is the physical layer interface for the corresponding host controller. This
driver uses the new PHY generic framework posted by Kishon Vijay Abrahm.
In addition, the new PHY generic framework is patched to provide an
function to set the speed of the PHY.

v4
* Update documentation with 'apm,' instead 'apm-'
* Change DTS override parameter to have 'apm,'
* Add select GENERIC_PHY to Kconfig PHY_XGENE
* Make override parameters to be pair of three values instead one
* Some minor comment and indentation changes
* Remove error register addition offset
* Add ULL to constants
* Use module_init instead subsys_initcall
* Make DTS node based on first register address
* Update override setting values

v3
* Major re-write of the code based on various review comments
* Support external clock only at the moment
* Support SATA mode only at the moment
* No UEFI support at the moment

v2
* Remove port knowledge from functions
* Make all functions static
* Remove ID completely
* Make resource requirement based on compatible type
* Rename override PHY parameters with more descriptive name
* Add override PHY parameter for per controller, per port, and per speed
* Patch the generic PHY frame to expose set_speed operation

v1
* Initial version

Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Tuan Phan <tphan@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
---
Loc Ho (4):
  PHY: Add function set_speed to generic PHY framework
  Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver
    binding documentation
  PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver
  arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries

 .../devicetree/bindings/ata/apm-xgene-phy.txt      |   89 +
 arch/arm64/boot/dts/apm-storm.dtsi                 |   31 +
 drivers/phy/Kconfig                                |    7 +
 drivers/phy/Makefile                               |    2 +
 drivers/phy/phy-core.c                             |   21 +
 drivers/phy/phy-xgene.c                            | 1854 ++++++++++++++++++++
 include/linux/phy/phy.h                            |    8 +
 7 files changed, 2012 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/ata/apm-xgene-phy.txt
 create mode 100644 drivers/phy/phy-xgene.c

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-11-01  7:04 Xiubo Li
  0 siblings, 0 replies; 335+ messages in thread
From: Xiubo Li @ 2013-11-01  7:04 UTC (permalink / raw)
  To: linux-arm-kernel


Hello,

This patch series is mostly Freescale's SAI SoC Digital Audio Interface driver implementation. And the implementation is only compatible with device tree definition.

This patch series is based on linux-next and has been tested on Vybrid VF610 Tower board using device tree.

Changed in v2:
- Use default settings for the generic dmaengine PCM driver.
- Separate receive and transmit setting in most functions, but some couldn't for the HW limitation.
- Drop some not reduntant code.
- Use devm_snd_soc_register_component() instead of snd_soc_register_component().
- Use devm_snd_soc_register_card() instead of devm_snd_soc_register_card().
- Adjust the code sentences sequence.
- Make the namespacing consistent.
- Rename CONFIG_SND_SOC_FSL_SGTL5000 to CONFIG_SND_SOC_FSL_SGTL5000_VF610.
- Drop some meaningless lines.
- Rename the binding document file.

Added in v1:
- Add SAI SoC Digital Audio Interface driver.
- Add Freescale SAI ALSA SoC Digital Audio Interface node for VF610.
- Enables SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.
- Add device tree bindings for Freescale SAI.
- Revise the bugs about the sgt15000 codec.
- Add SGT15000 based audio machine driver.
- Enable SGT15000 codec based audio driver node for VF610.
- Add device tree bindings for Freescale VF610 sound.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-09-24  3:13 Rohit Vaswani
  0 siblings, 0 replies; 335+ messages in thread
From: Rohit Vaswani @ 2013-09-24  3:13 UTC (permalink / raw)
  To: linux-arm-kernel

Date: Mon, 23 Sep 2013 19:51:25 -0700
Subject: [PATCH 1/3] ARM: debug: Create CONFIG_DEBUG_MSM_UART and re-organize
 the selects for MSM

Create the hidden config DEBUG_MSM_UART and clean-up the default selection
for CONFIG_DEBUG_LL_INCLUDE.

Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
---
 arch/arm/Kconfig.debug | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9762c84..e18a6fc 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -318,6 +318,7 @@ choice
 	config DEBUG_MSM_UART1
 		bool "Kernel low-level debugging messages via MSM UART1"
 		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the first serial port on MSM devices.
@@ -325,6 +326,7 @@ choice
 	config DEBUG_MSM_UART2
 		bool "Kernel low-level debugging messages via MSM UART2"
 		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on MSM devices.
@@ -332,6 +334,7 @@ choice
 	config DEBUG_MSM_UART3
 		bool "Kernel low-level debugging messages via MSM UART3"
 		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the third serial port on MSM devices.
@@ -340,6 +343,7 @@ choice
 		bool "Kernel low-level debugging messages via MSM 8660 UART"
 		depends on ARCH_MSM8X60
 		select MSM_HAS_DEBUG_UART_HS
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the serial port on MSM 8660 devices.
@@ -348,6 +352,7 @@ choice
 		bool "Kernel low-level debugging messages via MSM 8960 UART"
 		depends on ARCH_MSM8960
 		select MSM_HAS_DEBUG_UART_HS
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the serial port on MSM 8960 devices.
@@ -880,6 +885,10 @@ config DEBUG_STI_UART
 	bool
 	depends on ARCH_STI
 
+config DEBUG_MSM_UART
+	bool
+	depends on ARCH_MSM
+
 config DEBUG_LL_INCLUDE
 	string
 	default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
@@ -895,11 +904,7 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX53_UART ||\
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART
-	default "debug/msm.S" if DEBUG_MSM_UART1 || \
-				 DEBUG_MSM_UART2 || \
-				 DEBUG_MSM_UART3 || \
-				 DEBUG_MSM8660_UART || \
-				 DEBUG_MSM8960_UART
+	default "debug/msm.S" if DEBUG_MSM_UART
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
 	default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
 	default "debug/sti.S" if DEBUG_STI_UART
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

^ permalink raw reply related	[flat|nested] 335+ messages in thread
* No subject
@ 2013-09-15  9:49 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2013-09-15  9:49 UTC (permalink / raw)
  To: ath9k-devel

timestamp.

The question is, how accurated this timestamp is? The precision is in
nanoseconds, but what accuracy i can expect?

My main need is the implement a good precision TDOA algorithm.

I don't know jack about driver development, but is something that interests
me. If the accuracy is low, can i improve it in driver or firmware?
If its possible, i can even trade reception packet speed for a better
accuracy in timestamp.

The other question is, what is the difference between the ath9k_htc and
carl9170 drivers? Both support the AR9287 (from the debian wiki).

Thanks for all

Links:

Wireshark community:
http://ask.wireshark.org/questions/28683/recommended-wireless-adapter-usb-with-linux-wireshark-that-reports-mactime-in-radiotap-header

Debian Wiki ath9k_htc: https://wiki.debian.org/ath9k_htc

Debian Wiki carl9170: https://wiki.debian.org/carl9170

--001a11335f40ad0de604f2af55f8
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr">Hi,<div><br></div><div>I have one question about hardware =
timestamp in Atheros chipsets.</div><div>From a post in Wireshark community=
, the chipset AR9287 can do hardware timestamp.</div><div><br></div><div>Th=
e question is, how accurated this timestamp is? The precision is in nanosec=
onds, but what accuracy i can expect?</div>

<div><br></div><div>My main need is the implement a good precision TDOA alg=
orithm.=A0</div><div><br></div><div>I don&#39;t know jack about driver deve=
lopment, but is something that=A0interests me. If the accuracy is low, can =
i improve it in driver or firmware?=A0</div>

<div>If its possible, i can even trade reception packet speed for a better =
accuracy in timestamp.</div><div><br></div><div>The other question is, what=
 is the difference between the ath9k_htc and carl9170 drivers? Both support=
 the AR9287 (from the debian wiki).</div>

<div><br></div><div>Thanks for all</div><div><br></div><div>Links:</div><di=
v><br></div><div>Wireshark community: <a href=3D"http://ask.wireshark.org/q=
uestions/28683/recommended-wireless-adapter-usb-with-linux-wireshark-that-r=
eports-mactime-in-radiotap-header">http://ask.wireshark.org/questions/28683=
/recommended-wireless-adapter-usb-with-linux-wireshark-that-reports-mactime=
-in-radiotap-header</a></div>

<div><br></div><div>Debian Wiki ath9k_htc:=A0<a href=3D"https://wiki.debian=
.org/ath9k_htc">https://wiki.debian.org/ath9k_htc</a></div><div><br></div><=
div>Debian Wiki carl9170:=A0<a href=3D"https://wiki.debian.org/carl9170">ht=
tps://wiki.debian.org/carl9170</a></div>

</div>

--001a11335f40ad0de604f2af55f8--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-09-15  9:49 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2013-09-15  9:49 UTC (permalink / raw)
  To: ath9k-devel

selection is just a few days away) -- but June would be better anyway.

-- 
Bob Copeland %% www.bobcopeland.com

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-09-15  9:49 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2013-09-15  9:49 UTC (permalink / raw)
  To: ath9k-devel

generated acks.
Enabling hw acks results in duplicate, identical acks being sent by the
access point on successful frame receipt.
The difference is just in timings: while hw acks is usually received in
less then 10 or 20 microseconds from a successful frame receipt, sw
generated acks arrive in 2-300 microseconds.

We suppose the problem is in Clear Channel Assessment: the hardware waits
the right (CSMA compliant) time to send the frame while we would like it to
send the ack frame ASAP (i.e. wait SIFS instead of AIFS).

Tried a few flags with no success (tested with or without such flags and no
apparent change happened).
Flags are:

AR_DIAG_FORCE_RX_CLEAR
AR_DIAG_FORCE_CH_IDLE_HIGH
AR_DIAG_IGNORE_VIRT_CS
AR_D_GBL_IFS_MISC_IGNORE_BACKOFF


Possible "next steps":

- choose the correct hw queue  (now using queue skb->queue_mapping=3 and
skb->priority=7)
- find out the correct register values for disabling the virtual and
physical carrier sense (AR_DIAG_SW) for ath9k.
- find out if such values are "honored" in our card or if should be better
to simply change the atheros chipset family or card manufacturer
- disabling back-off setting the cwmin and cwmax to zero on the choosen
queue And also setting AIFS=1 (or zero?)
- disabling any debug code possibly inserted during coding phase (according
to
http://adrianchadd.blogspot.it/2012/11/be-careful-of-adding-debugging-as.html
)


Any suggestion?
Is anyone interested in collaborating in softMAC development? Right now we
are thinking about standard ack mechanism (i.e. a/g) but it could be
extended to blockAck (802.11e or "n" versions of a/g)?


Any feedback welcome...
Thnkz in advance!!!

Alex

--047d7b15ad979ce54c04edbbc6dc
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr">Hello everybody!<br>I&#39;s my first time writing to the l=
ist, while I&#39;m following it with interest for some time.<br><br>We&#39;=
re developing some MAC functions in software for testing purposes.<br><br>

The most challenging part seems to be generating Acks in software.<br><br>T=
hree main tasks:<br>1. Disabling Link Layer Acks in hardware<br>2. Generati=
ng Acks as &quot;low&quot; as possible in driver stack<br>3. sending such a=
cks as quickly as possible<br>

<br>Now, task 1 and 2 are done in ath9k: task 1 setting the appropriate fla=
g in the register and task 2 coding link layer ack generation in ath9k_rx t=
asklet.<br><br>We have a problem in task 3.<br>It seems that the ack frame =
is sent like regular frames, respecting CCA, while we would need the ack fr=
ames to be sent immediately, as soon as they&#39;ve been put in the tx queu=
e.<br>

<br>Test environment<br>Access Point <br>Hardware: Alix 2d2 board, Compex W=
LM200NX MiniPCI network adapter (should be Chipset AR9220 according to vend=
or datasheet - kernel Dmesg says &quot;ieee80211 phy0: Atheros AR9280 Rev:2=
 mem=3D0xd0ca0000, irq=3D9&quot;) <br>

Software: OpenWRT REVISION r37112<br><br>Client<br>any WiFi compliant clien=
t such as smartphones and laptop<br><br>Sniffer<br>wireshark on a laptop wi=
th a mon interface<br><br><br>Results<br>From a sniffer perspective you can=
not distinguish between hw and sw generated acks.<br>

Enabling hw acks results in duplicate, identical acks being sent by the acc=
ess point on successful frame receipt.<br>The difference is just in timings=
: while hw acks is usually received in less then 10 or 20 microseconds from=
 a successful frame receipt, sw generated acks arrive in 2-300 microseconds=
.<br>

<br>We suppose the problem is in Clear Channel Assessment: the hardware wai=
ts the right (CSMA compliant) time to send the frame while we would like it=
 to send the ack frame ASAP (i.e. wait SIFS instead of AIFS).<br><br>Tried =
a few flags with no success (tested with or without such flags and no appar=
ent change happened).<br>

Flags are:<br><br>AR_DIAG_FORCE_RX_CLEAR<br>AR_DIAG_FORCE_CH_IDLE_HIGH<br>A=
R_DIAG_IGNORE_VIRT_CS<br>AR_D_GBL_IFS_MISC_IGNORE_BACKOFF<br><br><br>Possib=
le &quot;next steps&quot;:<br><br>- choose the correct hw queue =A0(now usi=
ng queue skb-&gt;queue_mapping=3D3 and skb-&gt;priority=3D7)<br>

- find out the correct register values for disabling the virtual and physic=
al carrier sense (AR_DIAG_SW) for ath9k.<br>- find out if such values are &=
quot;honored&quot; in our card or if should be better to simply change the =
atheros chipset family or card manufacturer<br>

- disabling back-off setting the cwmin and cwmax to zero on the choosen que=
ue And also setting AIFS=3D1 (or zero?)<br>- disabling any debug code possi=
bly inserted during coding phase (according to <a href=3D"http://adrianchad=
d.blogspot.it/2012/11/be-careful-of-adding-debugging-as.html">http://adrian=
chadd.blogspot.it/2012/11/be-careful-of-adding-debugging-as.html</a>)<br>

<br><br>Any suggestion?<br>Is anyone interested in collaborating in softMAC=
 development? Right now we are thinking about standard ack mechanism (i.e. =
a/g) but it could be extended to blockAck (802.11e or &quot;n&quot; version=
s of a/g)?<div>

<br></div><div><br>Any feedback welcome...<br>Thnkz in advance!!!</div><div=
><br></div><div>Alex</div><div><br></div><div><br></div></div>

--047d7b15ad979ce54c04edbbc6dc--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-09-02 17:01 Drasko DRASKOVIC
  0 siblings, 0 replies; 335+ messages in thread
From: Drasko DRASKOVIC @ 2013-09-02 17:01 UTC (permalink / raw)
  To: linux-arm-kernel

Hi all,
In socfpga.dts I can see following definitions :

/* Local timer */
timer at fffec600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xfffec600 0x100>;
interrupts = <1 13 0xf04>;
};

timer0: timer0 at ffc08000 {
compatible = "snps,dw-apb-timer-sp";
interrupts = <0 167 4>;
reg = <0xffc08000 0x1000>;
};

timer1: timer1 at ffc09000 {
compatible = "snps,dw-apb-timer-sp";
interrupts = <0 168 4>;
reg = <0xffc09000 0x1000>;
};

timer2: timer2 at ffd00000 {
compatible = "snps,dw-apb-timer-osc";
interrupts = <0 169 4>;
reg = <0xffd00000 0x1000>;
};

timer3: timer3 at ffd01000 {
compatible = "snps,dw-apb-timer-osc";
interrupts = <0 170 4>;
reg = <0xffd01000 0x1000>;
};


However, from my board's shell :
root at socfpga_cyclone5:~# cat /proc/interrupts
           CPU0       CPU1
525:      24935      24717       GIC  twd
648:        801          0       GIC  eth0
653:          0          0       GIC  dwc_otg, dwc_otg_pcd, dwc_otg_hcd:usb1
656:          0          0       GIC  dwc_otg, dwc_otg_pcd, dwc_otg_hcd:usb2
667:     163006          0       GIC  dw-mci
679:          0          0       GIC  ff705000.spi
682:          0          0       GIC  dw_spi0
684:          0          0       GIC  dw_spi1
686:          6          0       GIC  ffc04000.i2c
687:          0          0       GIC  ffc05000.i2c
690:       2390          0       GIC  serial
697:          9          0       GIC  timer2
IPI0:          0          0  CPU wakeup interrupts
IPI1:          0          0  Timer broadcast interrupts
IPI2:       1268       1289  Rescheduling interrupts
IPI3:          0          0  Function call interrupts
IPI4:          3          1  Single function call interrupts
IPI5:          0          0  CPU stop interrupts
Err:          0

So, I can see only timer2.

root at socfpga_cyclone5:~# find / -name "timer*"
/proc/timer_list
/proc/device-tree/soc/timer3 at ffd01000
/proc/device-tree/soc/timer2 at ffd00000
/proc/device-tree/soc/timer1 at ffc09000
/proc/device-tree/soc/timer0 at ffc08000
/proc/device-tree/soc/timer at fffec600
/proc/device-tree/aliases/timer3
/proc/device-tree/aliases/timer2
/proc/device-tree/aliases/timer1
/proc/device-tree/aliases/timer0
/sys/kernel/debug/tracing/events/timer
/sys/kernel/debug/tracing/events/timer/timer_cancel
/sys/kernel/debug/tracing/events/timer/timer_expire_exit
/sys/kernel/debug/tracing/events/timer/timer_expire_entry
/sys/kernel/debug/tracing/events/timer/timer_start
/sys/kernel/debug/tracing/events/timer/timer_init
/sys/module/oprofile/parameters/timer
root at socfpga_cyclone5:~#

Where is defined which timer will be present, activated and
initialized on the board - i.e. only timer2 is active in this case,
and I would like to use timer1.

BR,
Drasko

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-08-24  9:29 Haojian Zhuang
  0 siblings, 0 replies; 335+ messages in thread
From: Haojian Zhuang @ 2013-08-24  9:29 UTC (permalink / raw)
  To: linux-arm-kernel

Changelog:
v8:
1. Drop to support CLK_GATE_SEPERATED_REG in common clock gate driver.
Support this feature in hi3xxx clock driver.
2. Clean unnecessary device node in DTS.
3. Define all clocks in hi3620-clk.dtsi. And all clock nodes are defined
in the clocks node.
4. Fix the clock gate & clock mux for timer.
5. Rename timer0~4 to dual_timer0~4 in DTS file. It's used to make
name clearer.

v7:
1. Add hi3xxx_defconfig.
2. Use reg property in clock node.
3. Drop origin clock divider table.
4. Reuse clock divider register helper.
5. Reuse clock gate register helper.
6. Append CLK_GATE_SEPERATED_REG flag in order to support Hisilicon
   Hi3620 SoC.
7. Rebase DEBUG_LL for Hi3xxx.
8. Add more clock node in DTS file.

v6:
1. Remove hisilicon string from properties in clock driver.
2. Replace array by pointer in clock driver. Since only sctrl parent
   node exists at this time.

v5:
1. Remove HIWORD clk patches since they're merged into clk git tree.
2. Set hisilicon,clk-reset property of clkgate node is optional.
3. Update on commandline args in DTS file. Remove earlyprintk, mem, nfs.
4. Move gpio-keys out of amba node in DTS file.

v4:
1. Add clk gate with HIWORD mask for Rockchip.
2. Update comments and code of HIWORD flags for mux/divider.
3. Append a mux without HIWORD mask in Hisilicon 3620.
4. Fix the pinmux setting in Hi4511.

v3:
1. Use clk_register_mux_table().

v2:
1. Reuse mux & divider driver. So append CLK_MUX_HIWORD_MASK &
CLK_DIVIDER_HIWORD_MASK for Hi3620 SoC.
2. Fix system timer running too fast because wrong divider is choosen.
3. Remove .init_irq in DT machine descriptor.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-07-30  4:09 PV Juliet
  0 siblings, 0 replies; 335+ messages in thread
From: PV Juliet @ 2013-07-30  4:09 UTC (permalink / raw)
  To: kernelnewbies

HI ,
    I am new to kernel .   I got some stuff on notifier chains  from net.
Where i can more elaborated  documents on notifier chains ? Can i get the
module out put  to user space(eg usb disk added) ?  I don't want to get it
from dmesg.
Thanks and Regards
Juliet
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20130730/6f3de789/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-07-26 10:05 Haojian Zhuang
  0 siblings, 0 replies; 335+ messages in thread
From: Haojian Zhuang @ 2013-07-26 10:05 UTC (permalink / raw)
  To: linux-arm-kernel

Changelog:
v6:
1. Merge clk apbc & apbcp together.
2. Add DT binding document of clock driver.
3. Remove marvell string in properties of clock driver.

v5:
1. Use clk mux table.

v4:
1. Remove .init_irq in mmp & mmp2 DT machine descriptor.
2. Use an argument to replace TIMER_PHYS_BASE. Now transfer virtual
address directly.
3. Merge 10th & 11th patches together. Remove the redundant changes
on drivers/clocksource/Kconfig & drivers/clocksource/Makefile.

v3:
1. Don't use include/linux/irqchip/mmp.h since we don't need to
move <mach/irqs.h> to <include/linux/irqchip/mmp.h>.
2. Move timer-mmp driver into clocksource directory & support
clocksource.
3. Support clksrc in mmp & parse all clock from DTS.

v2:
1. Avoid to include <mach/irqs.h>. Move the head file into
   include/linux/irqchip directory.
2. Avoid to include <mach/pm-pxa910.h> & <mach/pm-mmp2.h>.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-06-28  5:49 Wang, Yalin
  0 siblings, 0 replies; 335+ messages in thread
From: Wang, Yalin @ 2013-06-28  5:49 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Sboy,

I don't know who should I send this mail to .
If you are not the right person, please forward 
To the right responsible person , Thank you !

I have a question about msm kernel code :

File: Arch/arm/msm/memory.c

reserve_memory_for_mempools()
it call memblock_remove() directly,
I think it's not safe sometimes ,
Should use arm_memblock_steal() function or some other similar
Function to make sure the removed memory is not reserved by memblock driver,
In case the removed memory is reserved by some driver.


Thanks 


Yalin.Wang
Software Engineer 
OS Kernel&Graphics
?
Sony Mobile Communications
Tel: +86 10 5966 9819
Phone: 18610323092
Address: No.16 Guangshun South Street, Chaoyang, Beijing, P.R.C.

sonymobile.com
??

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-06-19 10:57 Ben Dooks
  0 siblings, 0 replies; 335+ messages in thread
From: Ben Dooks @ 2013-06-19 10:57 UTC (permalink / raw)
  To: linux-arm-kernel

I found this one whilst testing versatile-express with a -rc kernel
and was considering if this is the correct way to fix this.

[PATCH] atags_to_fdt: take into account root's #size and #cells

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-04-24 18:07 Viral Mehta
  0 siblings, 0 replies; 335+ messages in thread
From: Viral Mehta @ 2013-04-24 18:07 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,

I am using Marvell's ARMADA XP platform in my development environment.

Recently, I faced DMA related issue. While moving data from memory to
the device, I  found that sometimes I am getting Junk data. I looked
further to see if this is related to DMA Sync problem. So, basically,
I have following questions,

1. As per [1] ARMADA has Coherency Fabric that sits between CPU and
other devices and takes care of hardware based I/O cache coherency. Do
we need to enable any support for the same in software ? I am running
3.0.29 based linux kernel. How do I verify that I have all the things
enabled in Linux Kernel.

2. Do I still need to use dma_[map,unamp]_* APIs while copying data to
and from device ?


[1] http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf

--
Thanks,
Viral Mehta

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-04-12  7:08 Callum Hutchinson
  0 siblings, 0 replies; 335+ messages in thread
From: Callum Hutchinson @ 2013-04-12  7:08 UTC (permalink / raw)
  To: b43-dev, linux-wireless

Hi Kernel Maintainers,

Tried to report this properly via email but got some formatting issues
coming back, I've attached the content of the original email report as
'Report.txt'.

It is the same file as found on comment 12 on Launchpad bug.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1142385

Apologies for any missing information or lack of reporting experience :)
-------------- next part --------------
B43 Wireless Autoconnect Failure

I installed raring to test whether this bug existed in it and quantal too.
In the 3.8+ kernels there seems to be an issue with the b43 drivers, my
wireless works however it won't automatically connect to my hidden wireless
network. I have to go into network manager on each login and manually
select the option to connect, it takes a while but then the connection
works fine.
I know this didn't exist in 3.7.x because I was using those kernels
absolutely fine, it's only when I tried 3.8 on both quantal and raring that
the issue arose.
Note: I can't edit the wireless settings on my network as I am not the
administrator in my house.

ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: linux-image-3.8.0-9-generic 3.8.0-9.18
ProcVersionSignature: Ubuntu 3.8.0-9.18-generic 3.8.1
Uname: Linux 3.8.0-9-generic x86_64
ApportVersion: 2.9-0ubuntu2
Architecture: amd64
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: callum 1770 F.... pulseaudio
                      callum 3234 F.... pulseaudio
CRDA:
 country GB:
  (2402 - 2482 @ 40), (N/A, 20)
  (5170 - 5250 @ 40), (N/A, 20)
  (5250 - 5330 @ 40), (N/A, 20), DFS
  (5490 - 5710 @ 40), (N/A, 27), DFS
Date: Sun Mar 3 16:13:52 2013
HibernationDevice: RESUME=UUID=53b96653-3e0d-426b-a911-9c34d8657655
InstallationDate: Installed on 2013-03-02 (1 days ago)
InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20130301)
MachineType: Apple Inc. Macmini5,1
MarkForUpload: True
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-9-generic
root=UUID=b4faf392-19de-4749-bd48-bbda7a7519b3 ro quiet splash vt.handoff=7
RelatedPackageVersions:
 linux-restricted-modules-3.8.0-9-generic N/A
 linux-backports-modules-3.8.0-9-generic N/A
 linux-firmware 1.103
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 01/24/2012
dmi.bios.vendor: Apple Inc.
dmi.bios.version: MM51.88Z.0077.B10.1201241549
dmi.board.asset.tag: Base Board Asset Tag#
dmi.board.name: Mac-8ED6AF5B48C039E1
dmi.board.vendor: Apple Inc.
dmi.board.version: Macmini5,1
dmi.chassis.type: 16
dmi.chassis.vendor: Apple Inc.
dmi.chassis.version: Mac-8ED6AF5B48C039E1
dmi.modalias:
dmi:bvnAppleInc.:bvrMM51.88Z.0077.B10.1201241549:bd01/24/2012:svnAppleInc.:pnMacmini5,1:pvr1.0:rvnAppleInc.:rnMac-8ED6AF5B48C039E1:rvrMacmini5,1:cvnAppleInc.:ct16:cvrMac-8ED6AF5B48C039E1:
dmi.product.name: Macmini5,1
dmi.product.version: 1.0
dmi.sys.vendor: Apple Inc.

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1142385

amd64, mac, b43, networking, wireless, kernel

Linux version 3.9.0-030900rc4-generic (apw at gomeisa) (gcc version 4.6.3
(Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201303232035 SMP Sun Mar 24 00:36:21 UTC
2013

Description: Ubuntu Raring Ringtail (development branch)

Release: 13.04

If some fields are empty or look unusual you may have an old version.

Compare to the current minimal requirements in Documentation/Changes.



Linux callum-Macmini 3.9.0-030900rc4-generic #201303232035 SMP Sun Mar 24
00:36:21 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux



Gnu C                  4.7

Gnu make               3.81

binutils               2.23.2

util-linux             2.20.1

mount                  support

module-init-tools      9

e2fsprogs              1.42.5

pcmciautils            018

PPP                    2.4.5

Linux C Library        2.17

Dynamic linker (ldd)   2.17

Procps                 3.3.3

Net-tools              1.60

Kbd                    1.15.5

Sh-utils               8.20

wireless-tools         30

Modules Loaded         btrfs raid6_pq zlib_deflate xor ufs qnx4 hfsplus hfs
minix ntfs msdos jfs xfs libcrc32c reiserfs ext2 hid_magicmouse joydev hidp
parport_pc ppdev bnep rfcomm coretemp kvm_intel arc4 kvm snd_hda_codec_hdmi
snd_hda_codec_cirrus snd_hda_intel b43 btusb ghash_clmulni_intel
snd_hda_codec aesni_intel bluetooth aes_x86_64 snd_hwdep xts snd_pcm lrw
gf128mul binfmt_misc ablk_helper mac80211 i915 snd_page_alloc cryptd
snd_seq_midi snd_seq_midi_event snd_rawmidi cfg80211 snd_seq drm_kms_helper
snd_seq_device drm snd_timer ssb snd apple_gmux i2c_algo_bit soundcore
microcode shpchp applesmc mei apple_bl mac_hid input_polldev lpc_ich bcma
video lp parport hid_generic hid_apple usbhid hid firewire_ohci sdhci_pci
sdhci firewire_core tg3 crc_itu_t ptp pps_core
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 42
model name : Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz
stepping : 7
microcode : 0x1a
cpu MHz : 800.000
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm
constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3
cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes
xsave avx lahf_lm ida arat xsaveopt pln pts dtherm tpr_shadow vnmi
flexpriority ept vpid
bogomips : 4589.47
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 42
model name : Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz
stepping : 7
microcode : 0x1a
cpu MHz : 800.000
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm
constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3
cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes
xsave avx lahf_lm ida arat xsaveopt pln pts dtherm tpr_shadow vnmi
flexpriority ept vpid
bogomips : 4589.47
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 42
model name : Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz
stepping : 7
microcode : 0x1a
cpu MHz : 800.000
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm
constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3
cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes
xsave avx lahf_lm ida arat xsaveopt pln pts dtherm tpr_shadow vnmi
flexpriority ept vpid
bogomips : 4589.47
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 42
model name : Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz
stepping : 7
microcode : 0x1a
cpu MHz : 800.000
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm
constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3
cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes
xsave avx lahf_lm ida arat xsaveopt pln pts dtherm tpr_shadow vnmi
flexpriority ept vpid
bogomips : 4589.47
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

btrfs 843910 0 - Live 0x0000000000000000
raid6_pq 97812 1 btrfs, Live 0x0000000000000000
zlib_deflate 27110 1 btrfs, Live 0x0000000000000000
xor 21411 1 btrfs, Live 0x0000000000000000
ufs 75149 0 - Live 0x0000000000000000
qnx4 13396 0 - Live 0x0000000000000000
hfsplus 103443 0 - Live 0x0000000000000000
hfs 54780 0 - Live 0x0000000000000000
minix 36387 0 - Live 0x0000000000000000
ntfs 101633 0 - Live 0x0000000000000000
msdos 17332 0 - Live 0x0000000000000000
jfs 186589 0 - Live 0x0000000000000000
xfs 888928 0 - Live 0x0000000000000000
libcrc32c 12615 2 btrfs,xfs, Live 0x0000000000000000
reiserfs 248298 0 - Live 0x0000000000000000
ext2 73755 0 - Live 0x0000000000000000
hid_magicmouse 13712 0 - Live 0x0000000000000000
joydev 17613 0 - Live 0x0000000000000000
hidp 22599 2 - Live 0x0000000000000000
parport_pc 32866 0 - Live 0x0000000000000000
ppdev 17106 0 - Live 0x0000000000000000
bnep 18258 2 - Live 0x0000000000000000
rfcomm 47863 12 - Live 0x0000000000000000
coretemp 13596 0 - Live 0x0000000000000000
kvm_intel 138733 0 - Live 0x0000000000000000
arc4 12573 2 - Live 0x0000000000000000
kvm 452835 1 kvm_intel, Live 0x0000000000000000
snd_hda_codec_hdmi 37407 1 - Live 0x0000000000000000
snd_hda_codec_cirrus 14090 1 - Live 0x0000000000000000
snd_hda_intel 44397 3 - Live 0x0000000000000000
b43 391985 0 - Live 0x0000000000000000
btusb 18291 0 - Live 0x0000000000000000
ghash_clmulni_intel 13259 0 - Live 0x0000000000000000
snd_hda_codec 190010 3
snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel, Live
0x0000000000000000
aesni_intel 55449 2 - Live 0x0000000000000000
bluetooth 251354 31 hidp,bnep,rfcomm,btusb, Live 0x0000000000000000
aes_x86_64 17131 1 aesni_intel, Live 0x0000000000000000
snd_hwdep 13613 1 snd_hda_codec, Live 0x0000000000000000
xts 12922 1 aesni_intel, Live 0x0000000000000000
snd_pcm 102477 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec, Live
0x0000000000000000
lrw 13294 1 aesni_intel, Live 0x0000000000000000
gf128mul 14951 2 xts,lrw, Live 0x0000000000000000
binfmt_misc 17540 1 - Live 0x0000000000000000
ablk_helper 13597 1 aesni_intel, Live 0x0000000000000000
mac80211 656112 1 b43, Live 0x0000000000000000
i915 631460 4 - Live 0x0000000000000000
snd_page_alloc 18798 2 snd_hda_intel,snd_pcm, Live 0x0000000000000000
cryptd 20501 3 ghash_clmulni_intel,aesni_intel,ablk_helper, Live
0x0000000000000000
snd_seq_midi 13324 0 - Live 0x0000000000000000
snd_seq_midi_event 14899 1 snd_seq_midi, Live 0x0000000000000000
snd_rawmidi 30417 1 snd_seq_midi, Live 0x0000000000000000
cfg80211 547072 2 b43,mac80211, Live 0x0000000000000000
snd_seq 61930 2 snd_seq_midi,snd_seq_midi_event, Live 0x0000000000000000
drm_kms_helper 49082 1 i915, Live 0x0000000000000000
snd_seq_device 14497 3 snd_seq_midi,snd_rawmidi,snd_seq, Live
0x0000000000000000
drm 295908 5 i915,drm_kms_helper, Live 0x0000000000000000
snd_timer 29989 2 snd_pcm,snd_seq, Live 0x0000000000000000
ssb 57592 1 b43, Live 0x0000000000000000
snd 69533 16
snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_seq_device,snd_timer,
Live 0x0000000000000000
apple_gmux 13406 0 - Live 0x0000000000000000
i2c_algo_bit 13564 1 i915, Live 0x0000000000000000
soundcore 12680 1 snd, Live 0x0000000000000000
microcode 22923 0 - Live 0x0000000000000000
shpchp 37201 0 - Live 0x0000000000000000
applesmc 19564 0 - Live 0x0000000000000000
mei 46555 0 - Live 0x0000000000000000
apple_bl 13673 1 apple_gmux, Live 0x0000000000000000
mac_hid 13253 0 - Live 0x0000000000000000
input_polldev 13896 1 applesmc, Live 0x0000000000000000
lpc_ich 17060 0 - Live 0x0000000000000000
bcma 41434 1 b43, Live 0x0000000000000000
video 19467 2 i915,apple_gmux, Live 0x0000000000000000
lp 17799 0 - Live 0x0000000000000000
parport 46562 3 parport_pc,ppdev,lp, Live 0x0000000000000000
hid_generic 12548 0 - Live 0x0000000000000000
hid_apple 13389 0 - Live 0x0000000000000000
usbhid 47346 0 - Live 0x0000000000000000
hid 101248 5 hid_magicmouse,hidp,hid_generic,hid_apple,usbhid, Live
0x0000000000000000
firewire_ohci 44864 0 - Live 0x0000000000000000
sdhci_pci 18720 0 - Live 0x0000000000000000
sdhci 33227 1 sdhci_pci, Live 0x0000000000000000
firewire_core 64836 1 firewire_ohci, Live 0x0000000000000000
tg3 165632 0 - Live 0x0000000000000000
crc_itu_t 12707 1 firewire_core, Live 0x0000000000000000
ptp 18668 1 tg3, Live 0x0000000000000000
pps_core 14080 1 ptp, Live 0x0000000000000000

0000-0cf7 : PCI Bus 0000:00
  0000-001f : dma1
  0020-0021 : pic1
  0040-0043 : timer0
  0050-0053 : timer1
  0060-0060 : keyboard
  0062-0062 : EC data
  0064-0064 : keyboard
  0066-0066 : EC cmd
  0070-0077 : rtc0
  0080-008f : dma page reg
  00a0-00a1 : pic2
  00c0-00df : dma2
  00f0-00ff : fpu
  0300-031f : applesmc
  0400-047f : pnp 00:04
    0400-0403 : ACPI PM1a_EVT_BLK
    0404-0405 : ACPI PM1a_CNT_BLK
    0408-040b : ACPI PM_TMR
    0410-0415 : ACPI CPU throttle
    0420-042f : ACPI GPE0_BLK
    0430-0433 : iTCO_wdt
    0450-0450 : ACPI PM2_CNT_BLK
    0460-047f : iTCO_wdt
  0500-057f : pnp 00:04
0cf8-0cff : PCI conf1
0d00-ffff : PCI Bus 0000:00
  1000-100f : pnp 00:04
  2000-203f : 0000:00:02.0
  2060-206f : 0000:00:1f.2
    2060-206f : ata_piix
  20c0-20df : 0000:00:1d.0
    20c0-20df : uhci_hcd
  2120-213f : 0000:00:1a.0
    2120-213f : uhci_hcd
  2140-2147 : 0000:00:1f.2
    2140-2147 : ata_piix
  2148-214f : 0000:00:1f.2
    2148-214f : ata_piix
  2158-215b : 0000:00:1f.2
    2158-215b : ata_piix
  215c-215f : 0000:00:1f.2
    215c-215f : ata_piix
  3000-3fff : PCI Bus 0000:06
  efa0-efbf : 0000:00:1f.3
  ffe0-ffef : 0000:00:1f.2
    ffe0-ffef : ata_piix
00000000-00000fff : reserved
00001000-0008efff : System RAM
0008f000-0008ffff : reserved
00090000-0009fbff : System RAM
0009fc00-000fffff : reserved
  000a0000-000bffff : PCI Bus 0000:00
  000c0000-000cedff : Video ROM
  000f0000-000fffff : System ROM
00100000-1fffffff : System RAM
  01000000-01710dd0 : Kernel code
  01710dd1-01cf3b7f : Kernel data
  01e3c000-01f75fff : Kernel bss
20000000-201fffff : reserved
  20000000-201fffff : pnp 00:09
20200000-3fffffff : System RAM
40000000-401fffff : reserved
  40000000-401fffff : pnp 00:09
40200000-8ad33fff : System RAM
8ad34000-8ad5efff : ACPI Non-volatile Storage
8ad5f000-8afa1fff : ACPI Tables
8afa2000-8affefff : reserved
8afff000-8affffff : ACPI Tables
8b000000-8f9fffff : reserved
8fa00000-feafffff : PCI Bus 0000:00
  90000000-9fffffff : 0000:00:02.0
  a0000000-a03fffff : 0000:00:02.0
  a0400000-a04fffff : PCI Bus 0000:02
    a0400000-a040ffff : 0000:02:00.0
      a0400000-a040ffff : tg3
    a0410000-a041ffff : 0000:02:00.0
      a0410000-a041ffff : tg3
    a0420000-a042ffff : 0000:02:00.1
      a0420000-a042ffff : mmc0
  a0500000-a05fffff : PCI Bus 0000:04
    a0500000-a05fffff : PCI Bus 0000:05
      a0500000-a0503fff : 0000:05:00.0
      a0504000-a05047ff : 0000:05:00.0
        a0504000-a05047ff : firewire_ohci
  a0600000-a06fffff : PCI Bus 0000:03
    a0600000-a0603fff : 0000:03:00.0
      a0600000-a0603fff : bcma-pci-bridge
  a0700000-a07fffff : PCI Bus 0000:02
  a0800000-a08fffff : PCI Bus 0000:01
  a0900000-a0903fff : 0000:00:1b.0
    a0900000-a0903fff : ICH HD audio
  a0906800-a0906bff : 0000:00:1d.7
    a0906800-a0906bff : ehci_hcd
  a0906c00-a0906fff : 0000:00:1a.7
    a0906c00-a0906fff : ehci_hcd
  a0907000-a09070ff : 0000:00:1f.3
  a0907100-a090710f : 0000:00:16.0
    a0907100-a090710f : mei
  a0a00000-a4efffff : PCI Bus 0000:06
  a4f00000-a8efffff : PCI Bus 0000:06
  e0000000-efffffff : reserved
    e0000000-efffffff : pnp 00:08
      e0000000-e9cfffff : PCI MMCONFIG 0000 [bus 00-9c]
fec00000-fec00fff : reserved
  fec00000-fec003ff : IOAPIC 0
fed00000-fed03fff : reserved
  fed00000-fed003ff : HPET 0
    fed00000-fed003ff : pnp 00:02
fed10000-fed13fff : reserved
fed18000-fed19fff : reserved
  fed18000-fed18fff : pnp 00:08
  fed19000-fed19fff : pnp 00:08
fed1c000-fed1ffff : reserved
  fed1c000-fed1ffff : pnp 00:08
    fed1f410-fed1f414 : iTCO_wdt
fed20000-fed3ffff : pnp 00:08
fed40000-fed44fff : PCI Bus 0000:00
fed45000-fed8ffff : pnp 00:08
fed90000-fed93fff : pnp 00:08
fee00000-fee00fff : Local APIC
  fee00000-fee00fff : reserved
ff800000-ffffffff : reserved
100000000-26fdfffff : System RAM
26fe00000-26fffffff : RAM buffer

AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family
High Definition Audio Controller (rev 05)
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory@a0900000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
 Address: 00000000fee0f00c  Data: 4162
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
 MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns,
L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Virtual Channel
 Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
 Ctrl: ArbSelect=Fixed
Status: InProgress-
 VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
 Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
 VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
 Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
Status: NegoPending- InProgress-
 Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
 Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
 Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0700000-a07fffff
 Prefetchable memory behind bridge: 00000000a0400000-00000000a04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1
<16us
ClockPM- Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
 DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 41d1
Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 [Core
i7, 15", 2011]
 Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0600000-a06fffff
 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1
<16us
ClockPM- Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
 DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 41e1
Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 [Core
i7, 15", 2011]
 Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0500000-a05fffff
 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1
<16us
ClockPM- Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
 DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 4122
Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 [Core
i7, 15", 2011]
 Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Universal Host Controller #1 (rev 05) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports@20c0 [size=32]
 Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
 AFStatus: TP-
Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
 Interrupt: pin A routed to IRQ 22
Region 0: Memory@a0906800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
 AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci

00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC
Controller (rev 05)
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich

00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset
Family 4 port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO
PriP PriO])
Subsystem: Intel Corporation Device 7270
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 2148 [size=8]
 Region 1: I/O ports at 215c [size=4]
Region 2: I/O ports at 2140 [size=8]
Region 3: I/O ports at 2158 [size=4]
 Region 4: I/O ports at 2060 [size=16]
Region 5: I/O ports@ffe0 [size=16]
Capabilities: [70] Power Management version 3
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
 AFStatus: TP-
Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus
Controller (rev 05)
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
 Region 0: Memory at a0907000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports@efa0 [size=32]

02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM57765
Gigabit Ethernet PCIe (rev 10)
Subsystem: Broadcom Corporation NetXtreme BCM57765 Gigabit Ethernet PCIe
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at a0400000 (64-bit, prefetchable) [size=64K]
 Region 2: Memory@a0410000 (64-bit, prefetchable) [size=64K]
Capabilities: [48] Power Management version 3
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
 Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000  Data: 0000
Capabilities: [a0] MSI-X: Enable+ Count=6 Masked-
 Vector table: BAR=2 offset=00000000
PBA: BAR=2 offset=00000120
Capabilities: [ac] Express (v2) Endpoint, MSI 00
 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop-
 MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1
<64us
ClockPM+ Surprise- LLActRep- BwNot-
 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
 CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Device Serial Number 00-00-3c-07-54-52-c0-d1
 Capabilities: [150 v1] Power Budgeting <?>
Capabilities: [160 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Kernel driver in use: tg3

02:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory
Card Reader (rev 10) (prog-if 01)
Subsystem: Broadcom Corporation Device 0000
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory@a0420000 (64-bit, prefetchable) [size=64K]
 Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
 Address: 0000000000000000  Data: 0000
Capabilities: [ac] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
 ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1
<64us
ClockPM+ Surprise- LLActRep- BwNot-
 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
 CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [150 v1] Power Budgeting <?>
 Capabilities: [160 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Kernel driver in use: sdhci-pci

03:00.0 Network controller: Broadcom Corporation BCM4331 802.11a/b/g/n (rev
02)
Subsystem: Apple Inc. Device 00e4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Interrupt: pin A routed to IRQ 17
Region 0: Memory@a0600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
 Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
 Address: 0000000000000000  Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
 ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1
<64us
ClockPM+ Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
 UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
 Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 87-7d-6d-ff-ff-57-68-a8
 Capabilities: [16c v1] Power Budgeting <?>
Kernel driver in use: bcma-pci-bridge

04:00.0 PCI bridge: Texas Instruments XIO2213A/B/XIO2221 PCI Express to PCI
Bridge [Cheetah Express] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=04, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0500000-a05fffff
 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
 Address: 0000000000000000  Data: 0000
Capabilities: [80] Subsystem: Device 0000:0000
Capabilities: [90] Express (v1) PCI/PCI-X Bridge, MSI 00
 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
 MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns,
L1 <16us
ClockPM+ Surprise- LLActRep- BwNot-
 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
 UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-

05:00.0 FireWire (IEEE 1394): Texas Instruments XIO2213A/B/XIO2221
IEEE-1394b OHCI Controller [Cheetah Express] (rev 01) (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 248 (500ns min, 1000ns max), Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 18
Region 0: Memory at a0504000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at a0500000 (32-bit, non-prefetchable) [size=16K]
 Capabilities: [44] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: firewire_ohci

callum@callum-Macmini:~$ sudo lspci -vvv
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family
DRAM Controller (rev 09)
Subsystem: Apple Inc. Device 00e6
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
 Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
 Memory behind bridge: a0800000-a08fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Apple Inc. Device 00e6
 Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
 Address: fee0f00c  Data: 41b1
Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
 LnkCap: Port #2, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <1us, L1
<4us
ClockPM- Surprise- LLActRep- BwNot+
 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #1, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
 Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -3.5dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Capabilities: [140 v1] Root Complex Link
 Desc: PortNumber=02 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped
LinkValid+
 Addr: 00000000fed19000
Kernel driver in use: pcieport

00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=06, subordinate=9c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: a0a00000-a4efffff
 Prefetchable memory behind bridge: 00000000a4f00000-00000000a8efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [88] Subsystem: Apple Inc. Device 00e6
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
 Address: fee0f00c  Data: 41c1
Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
 LnkCap: Port #3, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <256ns, L1
<4us
ClockPM- Surprise- LLActRep- BwNot+
 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #2, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -3.5dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Capabilities: [140 v1] Root Complex Link
 Desc: PortNumber=03 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped
LinkValid+
 Addr: 00000000fed19000
Kernel driver in use: pcieport

00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA
controller])
Subsystem: Apple Inc. Device 00e6
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at a0000000 (64-bit, non-prefetchable) [size=4M]
 Region 2: Memory at 90000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2000 [size=64]
 Expansion ROM@<unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 4152
 Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
 AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915

00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 (rev 04)
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory@a0907100 (64-bit, non-prefetchable) [size=16]
 Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
 Address: 00000000fee0f00c  Data: 4142
Kernel driver in use: mei

00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Universal Host Controller #5 (rev 05) (prog-if 00 [UHCI])
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
 Interrupt: pin B routed to IRQ 21
Region 4: I/O ports@2120 [size=32]
Capabilities: [50] PCI Advanced Features
 AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
 Kernel driver in use: uhci_hcd

00:1a.7 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
 Interrupt: pin A routed to IRQ 23
Region 0: Memory@a0906c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
 AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family
High Definition Audio Controller (rev 05)
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory@a0900000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
 Address: 00000000fee0f00c  Data: 4162
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
 MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns,
L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Virtual Channel
 Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
 Ctrl: ArbSelect=Fixed
Status: InProgress-
 VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
 Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
 VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
 Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
Status: NegoPending- InProgress-
 Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
 Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
 Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0700000-a07fffff
 Prefetchable memory behind bridge: 00000000a0400000-00000000a04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1
<16us
ClockPM- Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
 DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 41d1
Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 [Core
i7, 15", 2011]
 Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0600000-a06fffff
 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1
<16us
ClockPM- Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
 DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 41e1
Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 [Core
i7, 15", 2011]
 Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0500000-a05fffff
 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1
<16us
ClockPM- Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
 DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 4122
Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 [Core
i7, 15", 2011]
 Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Universal Host Controller #1 (rev 05) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports@20c0 [size=32]
 Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
 AFStatus: TP-
Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
 Interrupt: pin A routed to IRQ 22
Region 0: Memory@a0906800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
 AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci

00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC
Controller (rev 05)
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich

00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset
Family 4 port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO
PriP PriO])
Subsystem: Intel Corporation Device 7270
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 2148 [size=8]
 Region 1: I/O ports at 215c [size=4]
Region 2: I/O ports at 2140 [size=8]
Region 3: I/O ports at 2158 [size=4]
 Region 4: I/O ports at 2060 [size=16]
Region 5: I/O ports@ffe0 [size=16]
Capabilities: [70] Power Management version 3
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
 AFStatus: TP-
Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus
Controller (rev 05)
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
 Region 0: Memory at a0907000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports@efa0 [size=32]

02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM57765
Gigabit Ethernet PCIe (rev 10)
Subsystem: Broadcom Corporation NetXtreme BCM57765 Gigabit Ethernet PCIe
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at a0400000 (64-bit, prefetchable) [size=64K]
 Region 2: Memory@a0410000 (64-bit, prefetchable) [size=64K]
Capabilities: [48] Power Management version 3
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
 Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000  Data: 0000
Capabilities: [a0] MSI-X: Enable+ Count=6 Masked-
 Vector table: BAR=2 offset=00000000
PBA: BAR=2 offset=00000120
Capabilities: [ac] Express (v2) Endpoint, MSI 00
 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop-
 MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1
<64us
ClockPM+ Surprise- LLActRep- BwNot-
 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
 CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Device Serial Number 00-00-3c-07-54-52-c0-d1
 Capabilities: [150 v1] Power Budgeting <?>
Capabilities: [160 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Kernel driver in use: tg3

02:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory
Card Reader (rev 10) (prog-if 01)
Subsystem: Broadcom Corporation Device 0000
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory@a0420000 (64-bit, prefetchable) [size=64K]
 Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
 Address: 0000000000000000  Data: 0000
Capabilities: [ac] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
 ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1
<64us
ClockPM+ Surprise- LLActRep- BwNot-
 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
 CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [150 v1] Power Budgeting <?>
 Capabilities: [160 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Kernel driver in use: sdhci-pci

03:00.0 Network controller: Broadcom Corporation BCM4331 802.11a/b/g/n (rev
02)
Subsystem: Apple Inc. Device 00e4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Interrupt: pin A routed to IRQ 17
Region 0: Memory@a0600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
 Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
 Address: 0000000000000000  Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
 ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1
<64us
ClockPM+ Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
 UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
 Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 87-7d-6d-ff-ff-57-68-a8
 Capabilities: [16c v1] Power Budgeting <?>
Kernel driver in use: bcma-pci-bridge

04:00.0 PCI bridge: Texas Instruments XIO2213A/B/XIO2221 PCI Express to PCI
Bridge [Cheetah Express] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=04, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0500000-a05fffff
 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
 Address: 0000000000000000  Data: 0000
Capabilities: [80] Subsystem: Device 0000:0000
Capabilities: [90] Express (v1) PCI/PCI-X Bridge, MSI 00
 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
 MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns,
L1 <16us
ClockPM+ Surprise- LLActRep- BwNot-
 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
 UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-

05:00.0 FireWire (IEEE 1394): Texas Instruments XIO2213A/B/XIO2221
IEEE-1394b OHCI Controller [Cheetah Express] (rev 01) (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 248 (500ns min, 1000ns max), Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 18
Region 0: Memory at a0504000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at a0500000 (32-bit, non-prefetchable) [size=16K]
 Capabilities: [44] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: firewire_ohci

callum at callum-Macmini:~$ clear

callum@callum-Macmini:~$ sudo lspci -vvv
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family
DRAM Controller (rev 09)
 Subsystem: Apple Inc. Device 00e6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
 Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
 Memory behind bridge: a0800000-a08fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Apple Inc. Device 00e6
 Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
 Address: fee0f00c  Data: 41b1
Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
 LnkCap: Port #2, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <1us, L1
<4us
ClockPM- Surprise- LLActRep- BwNot+
 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #1, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
 Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -3.5dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Capabilities: [140 v1] Root Complex Link
 Desc: PortNumber=02 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped
LinkValid+
 Addr: 00000000fed19000
Kernel driver in use: pcieport

00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=06, subordinate=9c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: a0a00000-a4efffff
 Prefetchable memory behind bridge: 00000000a4f00000-00000000a8efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [88] Subsystem: Apple Inc. Device 00e6
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
 Address: fee0f00c  Data: 41c1
Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
 LnkCap: Port #3, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <256ns, L1
<4us
ClockPM- Surprise- LLActRep- BwNot+
 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #2, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -3.5dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Capabilities: [140 v1] Root Complex Link
 Desc: PortNumber=03 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped
LinkValid+
 Addr: 00000000fed19000
Kernel driver in use: pcieport

00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA
controller])
Subsystem: Apple Inc. Device 00e6
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at a0000000 (64-bit, non-prefetchable) [size=4M]
 Region 2: Memory at 90000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2000 [size=64]
 Expansion ROM@<unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 4152
 Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
 AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915

00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 (rev 04)
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory@a0907100 (64-bit, non-prefetchable) [size=16]
 Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
 Address: 00000000fee0f00c  Data: 4142
Kernel driver in use: mei

00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Universal Host Controller #5 (rev 05) (prog-if 00 [UHCI])
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
 Interrupt: pin B routed to IRQ 21
Region 4: I/O ports@2120 [size=32]
Capabilities: [50] PCI Advanced Features
 AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
 Kernel driver in use: uhci_hcd

00:1a.7 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
 Interrupt: pin A routed to IRQ 23
Region 0: Memory@a0906c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
 AFCtrl: FLR-
AFStatus: TP+
Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family
High Definition Audio Controller (rev 05)
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory@a0900000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
 Address: 00000000fee0f00c  Data: 4162
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
 MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns,
L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Virtual Channel
 Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
 Ctrl: ArbSelect=Fixed
Status: InProgress-
 VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
 Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
 VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
 Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
Status: NegoPending- InProgress-
 Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
 Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
 Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0700000-a07fffff
 Prefetchable memory behind bridge: 00000000a0400000-00000000a04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1
<16us
ClockPM- Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
 DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 41d1
Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 [Core
i7, 15", 2011]
 Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0600000-a06fffff
 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1
<16us
ClockPM- Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
 DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 41e1
Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 [Core
i7, 15", 2011]
 Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0500000-a05fffff
 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1
<16us
ClockPM- Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
 DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 4122
Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 [Core
i7, 15", 2011]
 Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Universal Host Controller #1 (rev 05) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports@20c0 [size=32]
 Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
 AFStatus: TP-
Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
 Interrupt: pin A routed to IRQ 22
Region 0: Memory@a0906800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
 AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci

00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC
Controller (rev 05)
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich

00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset
Family 4 port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO
PriP PriO])
Subsystem: Intel Corporation Device 7270
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 2148 [size=8]
 Region 1: I/O ports at 215c [size=4]
Region 2: I/O ports at 2140 [size=8]
Region 3: I/O ports at 2158 [size=4]
 Region 4: I/O ports at 2060 [size=16]
Region 5: I/O ports@ffe0 [size=16]
Capabilities: [70] Power Management version 3
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
 AFStatus: TP-
Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus
Controller (rev 05)
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
 Region 0: Memory at a0907000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports@efa0 [size=32]

02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM57765
Gigabit Ethernet PCIe (rev 10)
Subsystem: Broadcom Corporation NetXtreme BCM57765 Gigabit Ethernet PCIe
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at a0400000 (64-bit, prefetchable) [size=64K]
 Region 2: Memory@a0410000 (64-bit, prefetchable) [size=64K]
Capabilities: [48] Power Management version 3
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
 Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000  Data: 0000
Capabilities: [a0] MSI-X: Enable+ Count=6 Masked-
 Vector table: BAR=2 offset=00000000
PBA: BAR=2 offset=00000120
Capabilities: [ac] Express (v2) Endpoint, MSI 00
 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop-
 MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1
<64us
ClockPM+ Surprise- LLActRep- BwNot-
 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
 CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Device Serial Number 00-00-3c-07-54-52-c0-d1
 Capabilities: [150 v1] Power Budgeting <?>
Capabilities: [160 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Kernel driver in use: tg3

02:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory
Card Reader (rev 10) (prog-if 01)
Subsystem: Broadcom Corporation Device 0000
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory@a0420000 (64-bit, prefetchable) [size=64K]
 Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
 Address: 0000000000000000  Data: 0000
Capabilities: [ac] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
 ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1
<64us
ClockPM+ Surprise- LLActRep- BwNot-
 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
 CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [150 v1] Power Budgeting <?>
 Capabilities: [160 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Kernel driver in use: sdhci-pci

03:00.0 Network controller: Broadcom Corporation BCM4331 802.11a/b/g/n (rev
02)
Subsystem: Apple Inc. Device 00e4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Interrupt: pin A routed to IRQ 17
Region 0: Memory@a0600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
 Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
 Address: 0000000000000000  Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
 ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1
<64us
ClockPM+ Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
 UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
 Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 87-7d-6d-ff-ff-57-68-a8
 Capabilities: [16c v1] Power Budgeting <?>
Kernel driver in use: bcma-pci-bridge

04:00.0 PCI bridge: Texas Instruments XIO2213A/B/XIO2221 PCI Express to PCI
Bridge [Cheetah Express] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=04, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0500000-a05fffff
 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
 Address: 0000000000000000  Data: 0000
Capabilities: [80] Subsystem: Device 0000:0000
Capabilities: [90] Express (v1) PCI/PCI-X Bridge, MSI 00
 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
 MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns,
L1 <16us
ClockPM+ Surprise- LLActRep- BwNot-
 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
 UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-

05:00.0 FireWire (IEEE 1394): Texas Instruments XIO2213A/B/XIO2221
IEEE-1394b OHCI Controller [Cheetah Express] (rev 01) (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 248 (500ns min, 1000ns max), Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 18
Region 0: Memory at a0504000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory@a0500000 (32-bit, non-prefetchable) [size=16K]
 Capabilities: [44] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: firewire_ohci

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: Hitachi HTS54505 Rev: PB4A
  Type:   Direct-Access                    ANSI  SCSI revision: 05

(Apologies to the kernel devs for any useless crap/long reading, I'm just
following the guide to reporting a proper bug for you from
https://wiki.ubuntu.com/Bugs/Upstream/kernel )

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-04-03 10:31 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2013-04-03 10:31 UTC (permalink / raw)
  To: ath9k-devel

monitor mode (non promiscuous) are corrupted. They
have the QoS Control stripped, with LLC header
finding itself in the QoS Control. Wireshark shows
such packets as A-MSDU corrupted frames. I tried
restoring the QoS Control but it didn't fix that.

I think we'll need to make a copy of skb, work on
that copy and keep the original skbuff pointer as
a "cookie" to use with mac80211 functions
(tx_status, free_txskb). I'm hoping this won't
degrade tx performance (well, we already do a
memmove()).

Yuck. Any comments?


Michal Kazior (2):
  ath10k: make more space in ath10k_skb_cb
  ath10k: copy skb during tx

 drivers/net/wireless/ath/ath10k/core.h |   32 ++++++++++++++++++++------------
 drivers/net/wireless/ath/ath10k/mac.c  |   21 +++++++++++++++++++--
 drivers/net/wireless/ath/ath10k/txrx.c |    8 +++++---
 3 files changed, 44 insertions(+), 17 deletions(-)

-- 
1.7.9.5

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-04-03 10:31 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2013-04-03 10:31 UTC (permalink / raw)
  To: ath9k-devel

Bartosz

On 9 May 2013 12:33, Kalle Valo <kvalo@qca.qualcomm.com> wrote:

> Bartosz Markowski <bartosz.markowski@tieto.com> writes:
>
> > Kalle, could you please submit/review these?
>
> I will not commit any patches which have either RFC or RFT tag. And I
> also review them in lower priority.
>
> So if you want me to commit something I recommend to use only PATCH.
>
> --
> Kalle Valo
>

--f46d04388e55778a4404dc43abee
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

<div>Michal, could you please address Kalle&#39;s comments.</div>
<div>=A0</div>
<div>From me ACK for the series (tested OK)</div>
<div>=A0</div>
<div>Bartosz<br><br></div>
<div class=3D"gmail_quote">On 9 May 2013 12:33, Kalle Valo <span dir=3D"ltr=
">&lt;<a href=3D"mailto:kvalo@qca.qualcomm.com" target=3D"_blank">kvalo at qca=
.qualcomm.com</a>&gt;</span> wrote:<br>
<blockquote style=3D"BORDER-LEFT:#ccc 1px solid;MARGIN:0px 0px 0px 0.8ex;PA=
DDING-LEFT:1ex" class=3D"gmail_quote">
<div class=3D"im">Bartosz Markowski &lt;<a href=3D"mailto:bartosz.markowski=
@tieto.com">bartosz.markowski at tieto.com</a>&gt; writes:<br><br>&gt; Kalle, =
could you please submit/review these?<br><br></div>I will not commit any pa=
tches which have either RFC or RFT tag. And I<br>
also review them in lower priority.<br><br>So if you want me to commit some=
thing I recommend to use only PATCH.<br><span class=3D"HOEnZb"><font color=
=3D"#888888"><br>--<br>Kalle Valo<br></font></span></blockquote></div><br>

--f46d04388e55778a4404dc43abee--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-04-03 10:31 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2013-04-03 10:31 UTC (permalink / raw)
  To: ath9k-devel

supposed to be prepared for reception of the firmware code from the driver.
This normally happens when the device boots up and passes the first stage of
the bootloader.  I suppose (I'm really totally guessing) that the driver
somehow doesn't do something to prepare the device for firmware upload if the
device is already past stage 2.

I would love to have the UART pins connected to some terminal, but I don't
have the soldering tools for such small-scale work...

-- 
A person is shit's way of making more shit.
		-- S. Barnett, anthropologist.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-04-03 10:31 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2013-04-03 10:31 UTC (permalink / raw)
  To: ath9k-devel

priority feature. For me most important is to support the real monitor
mode (iw wlan0 set type monitor), anything else is just nice to have.

I haven't even looked at your patches, but I'm worried that if a very
low priority feature jeopardizes normal functionality. What if we just
don't support the monitor mode while associated feature? Can we do that?

Disclaimer: I haven't looked at your patches

-- 
Kalle Valo

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-02-25  7:24 Prasad Lakshman
  0 siblings, 0 replies; 335+ messages in thread
From: Prasad Lakshman @ 2013-02-25  7:24 UTC (permalink / raw)
  To: kernelnewbies

Hi ,
I am trying to implement own system call in Linux. Kernel version I
chose is 3.5.7

I am following the steps from Linux Kernel Development 3rd edition.
I got two problems with the implementation.
1.while trying to modify the code in kernel , there is no entry.S file
for Intel x86 32 bit architecture. (my be i am missing some thing.)
2.while I am compiling user application with gcc I am getting

error: unknown type name ?helloworld?

my application is as follows

#define __NR_helloworld 367
__syscall0(long, helloworld)

int main ()
{
printf("The helloworld system call is\n";
helloworld();
return 0;
}


I looked at Link [blog.163.com] which is given by Wanny but i could
not find the solution,I could not locate syscall_table_32.s in my
Linux source.

Please  help me in identifying the entry.S file for Intel x86 32 bit
architecture in 3.5.7 kernel version sources,where i can make an entry
for my system call into system call table.

Help me in resolving  error: unknown type name ?helloworld? in my application.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-02-15  5:48 Kaushal Billore
  0 siblings, 0 replies; 335+ messages in thread
From: Kaushal Billore @ 2013-02-15  5:48 UTC (permalink / raw)
  To: kernelnewbies

I have some doubt regarding Linux kernel V4l2 API's.
When capture application calls Reqbuff ioctl to allocate n no of buffer which would belongs to v4l2 layer and display application calls the Reqbuff ioctl to allocate N no of buffer which would also belongs to device memory.

Question:
1. V4l2 maintains the generic layer for all devices in which buffers can be allocated by any device and can be handle by any device?

2. If not then while capturing the data from capture device can capture device allocated buffer gets filled and while displaying the same data  there memory copy happens between capture buffer and output buffers?

3. If not then I want to capture data from capture device and display onto display device through the v4l2 framework layer. 
   
Awaiting for responce!

Thanks in advance 
Kaushal 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20130215/f203090c/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-02-06 22:30 Jimmy Pan
  0 siblings, 0 replies; 335+ messages in thread
From: Jimmy Pan @ 2013-02-06 22:30 UTC (permalink / raw)
  To: kernelnewbies

unsuscribe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20130207/884e7ffe/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-01-16 21:46 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2013-01-16 21:46 UTC (permalink / raw)
  To: ath9k-devel

limitation in that it must not be reset more than once. That seems
like not so reliable PCIe IP, as long as the issue really is well
understood, but I'm not sure?

I would really like to hear the exact details about what the hardware
requires.


//Peter

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2013-01-16 21:46 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2013-01-16 21:46 UTC (permalink / raw)
  To: ath9k-devel

driver isn't doing something stupid like running multiple copies of
the reset / setup path on different CPUs/threads, it should be
reliable.

HTH,



Adrian

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-12-29  9:17 steve.zhan
  0 siblings, 0 replies; 335+ messages in thread
From: steve.zhan @ 2012-12-29  9:17 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,

    It is good idea add this feature.

1: Can we let the "ret = hwspin_lock_tests(ops, hwlock);" add after
hwspin_lock_register_single have return
succeed, that can avoid test duplicated Or error lockid. Of course, If
this interface is intend to test soc hardware capability only, we can
put it in the arch module not this core framework. For driver hardware
sanity check, i would add it after software have register it.


2:Is it possible that interface add configs that choose which locks
will be test? Because the hwspinlock module is init late in
postcore_initcall phase, Maybe MACH/ARCH code(for example: code in
early_initcall) need use private other interfaces to lock some
hwspinlocks and then register hw locks to hwspinlock framework, Maybe
some hw locks is in lock status but which test failed.




-- 
Steve Zhan


> From: Ido Yariv <ido@wizery.com>
> To: Ohad Ben-Cohen <ohad@wizery.com>, linux-kernel at vger.kernel.org,
> 	linux-arm-kernel at lists.infradead.org, linux-omap at vger.kernel.org
> Cc: Ido Yariv <ido@wizery.com>
> Subject: [PATCH] hwspinlock/core: Add testing capabilities
> Message-ID: <1355344026-17222-1-git-send-email-ido@wizery.com>
>
> Add testing capabilities for verifying correctness of the underlying
> hwspinlock layers. This can be handy especially during development.
> These tests are performed only once as part of the hwspinlock
> registration.
>
> Signed-off-by: Ido Yariv <ido@wizery.com>
> ---
>  drivers/hwspinlock/Kconfig           |    9 +++++
>  drivers/hwspinlock/hwspinlock_core.c |   54
> ++++++++++++++++++++++++++++++++++
>  2 files changed, 63 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/hwspinlock/Kconfig b/drivers/hwspinlock/Kconfig
> index c7c3128..ad632cd 100644
> --- a/drivers/hwspinlock/Kconfig
> +++ b/drivers/hwspinlock/Kconfig
> @@ -8,6 +8,15 @@ config HWSPINLOCK
>
>  menu "Hardware Spinlock drivers"
>
> +config HWSPINLOCK_TEST
> +	bool "Verify underlying hwspinlock implementation"
> +	depends on HWSPINLOCK
> +	help
> +	  Say Y here to perform tests on the underlying hwspinlock
> +	  implementation. The tests are only performed once per implementation.
> +
> +	  Say N, unless you absolutely know what you are doing.
> +
>  config HWSPINLOCK_OMAP
>  	tristate "OMAP Hardware Spinlock device"
>  	depends on ARCH_OMAP4
> diff --git a/drivers/hwspinlock/hwspinlock_core.c
> b/drivers/hwspinlock/hwspinlock_core.c
> index 085e28e..1874e85 100644
> --- a/drivers/hwspinlock/hwspinlock_core.c
> +++ b/drivers/hwspinlock/hwspinlock_core.c
> @@ -307,6 +307,53 @@ out:
>  	return hwlock;
>  }
>
> +#ifdef CONFIG_HWSPINLOCK_TEST
> +#define NUM_OF_TEST_ITERATIONS 100
> +static int hwspin_lock_tests(const struct hwspinlock_ops *ops,
> +			     struct hwspinlock *hwlock)
> +{
> +	int i;
> +	int ret;
> +
> +	for (i = 0; i < NUM_OF_TEST_ITERATIONS; i++) {
> +		ret = ops->trylock(hwlock);
> +		if (!ret) {
> +			pr_err("%s: Initial lock failed\n", __func__);
> +			return -EFAULT;
> +		}
> +
> +		/* Verify lock actually works - re-acquiring it should fail */
> +		ret = ops->trylock(hwlock);
> +		if (ret) {
> +			/* Keep locks balanced even in failure cases */
> +			ops->unlock(hwlock);
> +			ops->unlock(hwlock);
> +			pr_err("%s: Recursive lock succeeded unexpectedly\n",
> +			       __func__);
> +			return -EFAULT;
> +		}
> +
> +		/* Verify unlock by re-acquiring the lock after releasing it */
> +		ops->unlock(hwlock);
> +		ret = ops->trylock(hwlock);
> +		if (!ret) {
> +			pr_err("%s: Unlock failed\n", __func__);
> +			return -EINVAL;
> +		}
> +
> +		ops->unlock(hwlock);
> +	}
> +
> +	return 0;
> +}
> +#else /* CONFIG_HWSPINLOCK_TEST*/
> +static int hwspin_lock_tests(const struct hwspinlock_ops *ops,
> +			     struct hwspinlock *hwlock)
> +{
> +	return 0;
> +}
> +#endif
> +
>  /**
>   * hwspin_lock_register() - register a new hw spinlock device
>   * @bank: the hwspinlock device, which usually provides numerous hw locks
> @@ -345,6 +392,13 @@ int hwspin_lock_register(struct hwspinlock_device
> *bank, struct device *dev,
>  		spin_lock_init(&hwlock->lock);
>  		hwlock->bank = bank;
>
> +		ret = hwspin_lock_tests(ops, hwlock);
> +		if (ret) {
> +			pr_err("hwspinlock tests failed on lock %d\n",
> +			       base_id + i);
> +			goto reg_failed;
> +		}
> +
>  		ret = hwspin_lock_register_single(hwlock, base_id + i);
>  		if (ret)
>  			goto reg_failed;
> --
> 1.7.7.6

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-12-05 13:48 Niroj Pokhrel
  0 siblings, 0 replies; 335+ messages in thread
From: Niroj Pokhrel @ 2012-12-05 13:48 UTC (permalink / raw)
  To: kernelnewbies

Hi,
I'm trying to work on android audio (pcm_native.c) but got stuck in some
parameters like start threshold, stop threshold, silence zone, silence
threshold. Can anybody please elaborate on what they are each used for ??

-- 
Niroj Pokhrel
Software Engineer,
Samsung India Software Operations
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20121205/9b5d1739/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-11-19 11:41 唐忠诚
  0 siblings, 0 replies; 335+ messages in thread
From: 唐忠诚 @ 2012-11-19 11:41 UTC (permalink / raw)
  To: kernelnewbies

thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20121119/5b84e70c/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-11-11 14:16 Sammy Chan
  0 siblings, 0 replies; 335+ messages in thread
From: Sammy Chan @ 2012-11-11 14:16 UTC (permalink / raw)
  To: linux-arm-kernel

  http://ncompass1.altervista.org/wp-content/plugins/zgstplauaao/ugoogle.html

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-11-08  9:33 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2012-11-08  9:33 UTC (permalink / raw)
  To: ath9k-devel

timestamp (first frame?).

Thomas

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-11-08  8:07 Abhimanyu Kapur
  0 siblings, 0 replies; 335+ messages in thread
From: Abhimanyu Kapur @ 2012-11-08  8:07 UTC (permalink / raw)
  To: linux-arm-kernel

subscribe  		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20121108/ea49c32b/attachment-0001.html>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-11-02 10:46 Pritam Bankar
  0 siblings, 0 replies; 335+ messages in thread
From: Pritam Bankar @ 2012-11-02 10:46 UTC (permalink / raw)
  To: kernelnewbies

Hi,
I know very well that memory on 32-bit Linux system is normally split
in following way

First 3GB = user space (High memory)
Last 1GB = kernel space (Low memory)

But I have some questions,

1. How is memory split up on 64-bit architecture
2. Can we override this 3:1 split ?
3. If yes, who can do that user or kernel?

Thanks,
Pritam Bankar

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-10-15  9:24 Niroj Pokhrel
  0 siblings, 0 replies; 335+ messages in thread
From: Niroj Pokhrel @ 2012-10-15  9:24 UTC (permalink / raw)
  To: kernelnewbies

Hi,
I'm new to linux and kernel . I'm ongoing with the linux device drivers.
I've followed the the book LDD but i'm lost about how to call my driver's
specific method from the user space.
Eg: if have developed a character device and inserted the module then how
can i make sure that when I read or write that it implement the functions
via the methods i have implemented in my module.

-- 
Niroj Pokhrel
NIT Jamshedpur,
B.Tech,Electronics and Communication
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20121015/5d90dec4/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-10-14 10:05 Alexey Dobriyan
  0 siblings, 0 replies; 335+ messages in thread
From: Alexey Dobriyan @ 2012-10-14 10:05 UTC (permalink / raw)
  To: linux-arm-kernel

  http://www.hzsonic.com/en/wp-content/themes/twentyten/career.html

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-08-27  6:40 Simon Horman
  0 siblings, 0 replies; 335+ messages in thread
From: Simon Horman @ 2012-08-27  6:40 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Arnd, Hi Olaf,

please consider the following enhancements for the Armadillo800EVA board
from Laurent Pinchart for inclusion in 3.7.

I am currently in the processes of taking over maintenance
of shmoble from Rafael Wysocki and this my the first pull request
in that role.

----------------------------------------------------------------
The following changes since commit fea7a08acb13524b47711625eebea40a0ede69a0:

  Linux 3.6-rc3 (2012-08-22 13:29:06 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git armadillo800eva

for you to fetch changes up to 5c1d2d16772e2d7d4e2e8da99a92d6f50b9102f0:

  ARM: mach-shmobile: armadillo800eva: Enable power button as wakeup source (2012-08-25 15:44:53 +0900)

----------------------------------------------------------------
Laurent Pinchart (2):
      ARM: mach-shmobile: armadillo800eva: Fix GPIO buttons descriptions
      ARM: mach-shmobile: armadillo800eva: Enable power button as wakeup source

 arch/arm/mach-shmobile/board-armadillo800eva.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-08-13 10:09 Vivek Panwar
  0 siblings, 0 replies; 335+ messages in thread
From: Vivek Panwar @ 2012-08-13 10:09 UTC (permalink / raw)
  To: kernelnewbies

HI,

How KGDB works internally or how a gdb stub works internally with source
code for x86_64 arch. Can some one please suggest me the good docs for the
same.I am very new to this so want know whole detailed internally working
procedure for KGDB.

Thanks
Vivek
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20120813/60e980ea/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-08-06 10:43 =?gb18030?B?wObC5A==?=
  0 siblings, 0 replies; 335+ messages in thread
From: =?gb18030?B?wObC5A==?= @ 2012-08-06 10:43 UTC (permalink / raw)
  To: kernelnewbies

hello   i  want  to  sabrit  the  mailist
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20120806/8156c302/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-07-30 19:04 siddhesh phadke
  0 siblings, 0 replies; 335+ messages in thread
From: siddhesh phadke @ 2012-07-30 19:04 UTC (permalink / raw)
  To: kernelnewbies

I am newbie in nested KVM virtualization and I am trying to understand
the code for nested virtualization. I am not able to understand how
nested guest's ioctl calls are intercepted by KVM.Does each ioctl of
nested guest is intercepted by L0 or it is passed to L1?

Can anyone please help me with this or correct me if I am totally off the track?

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-06-21 18:26 Paul Walmsley
  0 siblings, 0 replies; 335+ messages in thread
From: Paul Walmsley @ 2012-06-21 18:26 UTC (permalink / raw)
  To: linux-arm-kernel

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi Tony

The following changes since commit 485802a6c524e62b5924849dd727ddbb1497cc71:

  Linux 3.5-rc3 (2012-06-16 17:25:17 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending.git tags/omap-cleanup-a-for-3.6

for you to fetch changes up to 07b3a13957aa250ff5b5409b8ed756b113544112:

  Merge branches 'clock_cleanup_misc_3.6', 'control_clean_dspbridge_writes_cleanup_3.6', 'hwmod_soc_conditional_cleanup_3.6', 'mcbsp_clock_aliases_cleanup_3.6' and 'remove_clkdm_requirement_from_hwmod_3.6' into omap_cleanup_a_3.6 (2012-06-20 20:11:36 -0600)

- ----------------------------------------------------------------

Some OMAP hwmod, clock, and System Control Module cleanup patches for 3.6.

- ----------------------------------------------------------------

Testing logs are available at

http://www.pwsan.com/omap/bootlogs/20120620/omap_cleanup_a_3.6__07b3a13957aa250ff5b5409b8ed756b113544112/

The summary is that 5912OSK NFS root and N800 MMC don't boot to
userspace; this broke between v3.4-rc2 and v3.5-rc3.  3517 boards are
still broken with NFS root and also several stack tracebacks during
boot.  In terms of PM, core isn't entering idle on OMAP3 or OMAP4.
These problems all exist in v3.5-rc3 - they aren't caused by this
series.

object size (delta in bytes from v3.5-rc3 (485802a6c524e62b5924849dd727ddbb1497cc71)):
  text 	  data 	   bss 	 total 	kernel
     0 	     0 	     0 	     0 	5912osk_testconfig/vmlinux
 +4636 	  -400 	     0 	 +4236 	am33xx_testconfig/vmlinux
  +440 	  -408 	   +32 	   +64 	n800_multi_omap2xxx/vmlinux
  +416 	  -192 	   +32 	  +256 	n800_testconfig/vmlinux
     0 	     0 	     0 	     0 	omap1510_defconfig/vmlinux
     0 	     0 	     0 	     0 	omap1_defconfig/vmlinux
  +732 	  -456 	     0 	  +276 	omap2_4_testconfig/vmlinux
 +4776 	  -624 	     0 	 +4152 	omap2plus_defconfig/vmlinux
  +684 	  -664 	     0 	   +20 	omap2plus_no_pm/vmlinux
  +616 	  -336 	   +64 	  +344 	omap3_4_testconfig/vmlinux
  +360 	  -384 	     0 	   -24 	omap3_testconfig/vmlinux
  +580 	  -120 	   +64 	  +524 	omap4_testconfig/vmlinux


Kevin Hilman (7):
      ARM: OMAP4: hwmod: rename _enable_module to _omap4_enable_module()
      ARM: OMAP2+: hwmod: use init-time function ptrs for enable/disable module
      ARM: OMAP4: hwmod: drop extra cpu_is check from _wait_target_disable()
      ARM: OMAP2+: hwmod: use init-time function pointer for wait_target_ready
      ARM: OMAP2+: hwmod: use init-time function pointer for hardreset
      ARM: OMAP2+: hwmod: use init-time function pointer for _init_clkdm
      ARM: OMAP2+: CLEANUP: Remove ARCH_OMAPx ifdef from struct dpll_data

Omar Ramirez Luna (2):
      ARM: OMAP2+: control: new APIs to configure boot address and mode
      ARM: OMAP: dsp: interface to control module functions

Paul Walmsley (2):
      ARM: OMAP2+: hwmod: remove prm_clkdm, cm_clkdm; allow hwmods to have no clockdomain
      Merge branches 'clock_cleanup_misc_3.6', 'control_clean_dspbridge_writes_cleanup_3.6', 'hwmod_soc_conditional_cleanup_3.6', 'mcbsp_clock_aliases_cleanup_3.6' and 'remove_clkdm_requirement_from_hwmod_3.6' into omap_cleanup_a_3.6

Peter Ujfalusi (3):
      ARM: OMAP2: Move McBSP fck clock alias to hwmod data for OMAP2420
      ARM: OMAP2: Move McBSP fck clock alias to hwmod data for OMAP2430
      ARM: OMAP3: Move McBSP fck clock alias to hwmod data

 arch/arm/mach-omap2/Makefile                       |    1 -
 arch/arm/mach-omap2/clock2420_data.c               |    4 -
 arch/arm/mach-omap2/clock2430_data.c               |   10 -
 arch/arm/mach-omap2/clock3xxx_data.c               |   10 -
 arch/arm/mach-omap2/clockdomain.h                  |    2 -
 arch/arm/mach-omap2/clockdomains2420_data.c        |    2 -
 arch/arm/mach-omap2/clockdomains2430_data.c        |    2 -
 arch/arm/mach-omap2/clockdomains3xxx_data.c        |    2 -
 arch/arm/mach-omap2/clockdomains44xx_data.c        |    2 -
 arch/arm/mach-omap2/clockdomains_common_data.c     |   24 --
 arch/arm/mach-omap2/control.c                      |   43 ++
 arch/arm/mach-omap2/control.h                      |    2 +
 arch/arm/mach-omap2/dsp.c                          |    4 +
 .../include/mach/ctrl_module_core_44xx.h           |    1 +
 arch/arm/mach-omap2/omap_hwmod.c                   |  427 ++++++++++++++------
 arch/arm/mach-omap2/omap_hwmod_2420_data.c         |   10 +
 arch/arm/mach-omap2/omap_hwmod_2430_data.c         |   16 +
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c         |   23 ++
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c         |    4 +-
 arch/arm/plat-omap/include/plat/clock.h            |    2 -
 arch/arm/plat-omap/include/plat/dsp.h              |    3 +
 arch/arm/plat-omap/include/plat/omap_hwmod.h       |    2 +
 22 files changed, 409 insertions(+), 187 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/clockdomains_common_data.c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
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=rQK5
-----END PGP SIGNATURE-----

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-06-06 10:33 Sascha Hauer
  0 siblings, 0 replies; 335+ messages in thread
From: Sascha Hauer @ 2012-06-06 10:33 UTC (permalink / raw)
  To: linux-arm-kernel

The following adds i.MX53 nand support and generally devicetree
based probing for i.MX5 boards. The first three patches should go
via mtd, the last patch optionally aswell if all agree.

Sascha

The following changes since commit f8f5701bdaf9134b1f90e5044a82c66324d2073f:

  Linux 3.5-rc1 (2012-06-02 18:29:26 -0700)

are available in the git repository at:

  git://git.pengutronix.de/git/imx/linux-2.6.git imx/nand-mx53

for you to fetch changes up to d55d1479a3bfaedbb9f0c6c956f4dff6bb6d6d61:

  ARM i.MX5: Add nand oftree support (2012-06-06 12:20:24 +0200)

----------------------------------------------------------------
Sascha Hauer (4):
      mtd nand mxc_nand: Use managed resources
      mtd nand mxc_nand: swap iomem resource order
      mtd nand mxc_nand: add i.MX53 support
      ARM i.MX5: Add nand oftree support

 arch/arm/boot/dts/imx51.dtsi                  |    7 ++
 arch/arm/boot/dts/imx53.dtsi                  |    7 ++
 arch/arm/mach-imx/clk-imx51-imx53.c           |    2 +
 arch/arm/plat-mxc/devices/platform-mxc_nand.c |   11 +-
 drivers/mtd/nand/mxc_nand.c                   |  137 ++++++++++++++-----------
 5 files changed, 97 insertions(+), 67 deletions(-)

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-05-25 15:26 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2012-05-25 15:26 UTC (permalink / raw)
  To: ath9k-devel

it being NULL along the way"
I guess you refer to the comment in mac80211.h, struct tx_info that I
removed:
- * The TX control's sta pointer is only valid during the ->tx call,
- * it may be NULL.

I am not sure what you want me to keep here as comment. As the sta
pointer is moved into the new struct tx_control and the remaining
pointers in the tx_info->control structure (vif, hw_key) are ALL only
valid during the ->tx call and may be NULL. So I could think of adding a
comment to tx_control about the sta been NULL, but anything more ?


>> The tx-path of all affected drivers is restructured to respect the
chaneged
>> layout of struct ieee80211_tx_info. List of modified drivers:
>> ath9k
>
> Please also remove the driver list. git can tell you the modified files
> very easily.

Will do so in v2.

Greetings Thomas

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-05-25 15:26 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2012-05-25 15:26 UTC (permalink / raw)
  To: ath9k-devel

"enabled" in the device driver. I will scour  the ath9k source code for
this config.

=20

Thank you for your input.

=20

Hasan R.

=20

=20

From: adrian.chadd@gmail.com [mailto:adrian.chadd at gmail.com] On Behalf
Of Adrian Chadd
Sent: Sunday, May 27, 2012 7:18 PM
To: Hasan Rashid
Cc: ath9k-devel at lists.ath9k.org
Subject: Re: [ath9k-devel] Atheros AR9382 W_DISABLE_L PIN 20 Mini-PCIe

=20

Hi,

=20

So the 30 second version of rfkill is this:

=20

* it can be software driven (ie, the driver implements rfkill by
stopping TX/RX and baseband activity, possibly shutting down the NIC)

* it can be hardware driven (ie, there's an RFKill line to the NIC via=
 a
GPIO pin)

=20

The pin itself can be controlled by:

=20

* hardware - ie, a physical switch to the rfkill pin;

* software - ie, some ACPI controlled function maps to the rfkill pin.

=20

What you have above seems to be (2) and (1) respectively - ie, that pin
is mapped to GPIO7 on the NIC, and now you need to program GPIO7 to be
an RFkill pin. There's code in ath9k somewhere to configure the GPIO pin
correctly to implement hardware rfkill.

=20

Good luck!

=20

=20

Adrian


This communication contains information that may be confidential or priv=
ileged. The information is solely intended for the use of the addressee.=
 If you are not the intended recipient, be advised that any disclosure,=
 copy, distribution, or use of the contents of this communication is pro=
hibited. If you have received this communication in
error, please immediately notify the sender by telephone or by electroni=
c mail.
------_=_NextPart_001_01CD3DB5.D3C19EF1
Content-Type: text/html; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable

<html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-m=
icrosoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:=
word" xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=
=3D"http://www.w3.org/TR/REC-html40"><head><meta http-equiv=3DContent-Ty=
pe content=3D"text/html; charset=3Dus-ascii"><meta name=3DGenerator cont=
ent=3D"Microsoft Word 14 (filtered medium)"><style><!--
/* Font Definitions */
@font-face
	{font-family:Calibri;
	panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
	{font-family:Tahoma;
	panose-1:2 11 6 4 3 5 4 4 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
	{margin:0in;
	margin-bottom:.0001pt;
	font-size:12.0pt;
	font-family:"Times New Roman","serif";}
a:link, span.MsoHyperlink
	{mso-style-priority:99;
	color:blue;
	text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
	{mso-style-priority:99;
	color:purple;
	text-decoration:underline;}
span.EmailStyle17
	{mso-style-type:personal-reply;
	font-family:"Calibri","sans-serif";
	color:#1F497D;}
.MsoChpDefault
	{mso-style-type:export-only;
	font-family:"Calibri","sans-serif";}
@page WordSection1
	{size:8.5in 11.0in;
	margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
	{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]--></head><body lang=3DEN-US link=3Dblue=
 vlink=3Dpurple><div class=3DWordSection1><p class=3DMsoNormal><span sty=
le=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'=
From your email I gather I have a RFKILL switch but it needs to be &#82=
20;enabled&#8221; in the device driver. I will scour &nbsp;the ath9k sou=
rce code for this config.<o:p></o:p></span></p><p class=3DMsoNormal><spa=
n style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F=
497D'><o:p>&nbsp;</o:p></span></p><p class=3DMsoNormal><span style=3D'fo=
nt-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Thank=
 you for your input.<o:p></o:p></span></p><p class=3DMsoNormal><span sty=
le=3D'font-size:10.0pt;font-family:"Arial","sans-serif";color:#1F497D'><=
o:p>&nbsp;</o:p></span></p><p class=3DMsoNormal><span style=3D'font-size=
:10.0pt;font-family:"Arial","sans-serif";color:#1F497D'>Hasan R.<o:p></o=
:p></span></p><p class=3DMsoNormal><span style=3D'font-size:10.0pt;font-=
family:"Arial","sans-serif";color:#1F497D'>&nbsp;<o:p></o:p></span></p><=
p class=3DMsoNormal><span style=3D'font-size:10.0pt;font-family:"Arial",=
"sans-serif";color:#1F497D'>&nbsp;</span><span style=3D'font-size:11.0pt=
;font-family:"Calibri","sans-serif";color:#1F497D'><o:p></o:p></span></p=
><p class=3DMsoNormal style=3D'margin-left:.5in'><b><span style=3D'font-=
size:10.0pt;font-family:"Tahoma","sans-serif"'>From:</span></b><span sty=
le=3D'font-size:10.0pt;font-family:"Tahoma","sans-serif"'> adrian.chadd@=
gmail.com [mailto:adrian.chadd at gmail.com] <b>On Behalf Of </b>Adrian Cha=
dd<br><b>Sent:</b> Sunday, May 27, 2012 7:18 PM<br><b>To:</b> Hasan Rash=
id<br><b>Cc:</b> ath9k-devel at lists.ath9k.org<br><b>Subject:</b> Re: [ath=
9k-devel] Atheros AR9382 W_DISABLE_L PIN 20 Mini-PCIe<o:p></o:p></span><=
/p><p class=3DMsoNormal style=3D'margin-left:.5in'><o:p>&nbsp;</o:p></p>=
<p class=3DMsoNormal style=3D'margin-left:.5in'>Hi,<o:p></o:p></p><div><=
p class=3DMsoNormal style=3D'margin-left:.5in'><o:p>&nbsp;</o:p></p></di=
v><div><p class=3DMsoNormal style=3D'margin-left:.5in'>So the 30 second=
 version of rfkill is this:<o:p></o:p></p></div><div><p class=3DMsoNorma=
l style=3D'margin-left:.5in'><o:p>&nbsp;</o:p></p></div><div><p class=3D=
MsoNormal style=3D'margin-left:.5in'>* it can be software driven (ie,=
 the driver implements rfkill by stopping TX/RX and baseband activity,=
 possibly shutting down the NIC)<o:p></o:p></p></div><div><p class=3DMso=
Normal style=3D'margin-left:.5in'>* it can be hardware driven (ie, there=
's an RFKill line to the NIC via a GPIO pin)<o:p></o:p></p></div><div><p=
 class=3DMsoNormal style=3D'margin-left:.5in'><o:p>&nbsp;</o:p></p></div=
><div><p class=3DMsoNormal style=3D'margin-left:.5in'>The pin itself can=
 be controlled by:<o:p></o:p></p></div><div><p class=3DMsoNormal style=
=3D'margin-left:.5in'><o:p>&nbsp;</o:p></p></div><div><p class=3DMsoNorm=
al style=3D'margin-left:.5in'>* hardware - ie, a physical switch to the=
 rfkill pin;<o:p></o:p></p></div><div><p class=3DMsoNormal style=3D'marg=
in-left:.5in'>* software - ie, some ACPI controlled function maps to the=
 rfkill pin.<o:p></o:p></p></div><div><p class=3DMsoNormal style=3D'marg=
in-left:.5in'><o:p>&nbsp;</o:p></p></div><div><p class=3DMsoNormal style=
=3D'margin-left:.5in'>What you have above seems to be (2) and (1) respec=
tively - ie, that pin is mapped to GPIO7 on the NIC, and now you need=
 to program GPIO7 to be an RFkill pin. There's code in ath9k somewhere=
 to configure the GPIO pin correctly to implement hardware rfkill.<o:p><=
/o:p></p></div><div><p class=3DMsoNormal style=3D'margin-left:.5in'><o:p=
>&nbsp;</o:p></p></div><div><p class=3DMsoNormal style=3D'margin-left:.5=
in'>Good luck!<o:p></o:p></p></div><div><p class=3DMsoNormal style=3D'ma=
rgin-left:.5in'><o:p>&nbsp;</o:p></p></div><div><p class=3DMsoNormal sty=
le=3D'margin-left:.5in'><o:p>&nbsp;</o:p></p></div><div><p class=3DMsoNo=
rmal style=3D'margin-left:.5in'>Adrian<o:p></o:p></p></div></div>
<!-- Begin Ninja Disclaimer ID 06d1f63c-a7f2-4bdd-9832-359e6e93159e -->
<P>This communication contains information that may be confidential or=
 privileged. The information is solely intended for the use of the addre=
ssee. If you are not the intended recipient, be advised that any disclos=
ure, copy, distribution, or use of the contents of this communication=
 is prohibited. If you have received this communication in<BR>error, ple=
ase immediately notify the sender by telephone or by electronic mail.</P>
<P>Export Notice: This email may contain technical data controlled under=
 the&nbsp; International Traffic in Arms Regulations (ITAR) by the U.S.=
 Department of State (22 CFR 120-130) or under the U.S Export Administra=
tion Regulations (EAR) by the Department of Commerce (15 CFR 730-744).&n=
bsp; Violations of these export laws are subject to severe criminal pena=
lties.&nbsp; <BR></P>
</body></html>
------_=_NextPart_001_01CD3DB5.D3C19EF1--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-05-18 12:27 Sascha Hauer
  0 siblings, 0 replies; 335+ messages in thread
From: Sascha Hauer @ 2012-05-18 12:27 UTC (permalink / raw)
  To: linux-arm-kernel

Hi All,

The following adds a drm/kms driver for the Freescale i.MX LCDC
controller. Most notable change to the last SDRM based version is that
the SDRM layer has been removed and the driver now is purely i.MX
specific. I hope that this is more acceptable now.

Another change is that the probe is now devicetree based. For now I
took the easy way out and only put an edid blob into the devicetree.
I haven't documented the binding yet, I would add that when the rest
is considered ok.

Comments very welcome.

Thanks
 Sascha

----------------------------------------------------------------
Sascha Hauer (2):
      DRM: add Freescale i.MX LCDC driver
      pcm038 lcdc support

 arch/arm/boot/dts/imx27-phytec-phycore.dts |   39 ++
 arch/arm/boot/dts/imx27.dtsi               |    7 +
 arch/arm/mach-imx/clock-imx27.c            |    1 +
 drivers/gpu/drm/Kconfig                    |    2 +
 drivers/gpu/drm/Makefile                   |    1 +
 drivers/gpu/drm/imx/Kconfig                |   18 +
 drivers/gpu/drm/imx/Makefile               |    8 +
 drivers/gpu/drm/imx/imx-drm-core.c         |  745 ++++++++++++++++++++++++++++
 drivers/gpu/drm/imx/imx-fb.c               |  179 +++++++
 drivers/gpu/drm/imx/imx-fbdev.c            |  275 ++++++++++
 drivers/gpu/drm/imx/imx-gem.c              |  343 +++++++++++++
 drivers/gpu/drm/imx/imx-lcdc-crtc.c        |  517 +++++++++++++++++++
 drivers/gpu/drm/imx/imx-parallel-display.c |  228 +++++++++
 13 files changed, 2363 insertions(+)
 create mode 100644 drivers/gpu/drm/imx/Kconfig
 create mode 100644 drivers/gpu/drm/imx/Makefile
 create mode 100644 drivers/gpu/drm/imx/imx-drm-core.c
 create mode 100644 drivers/gpu/drm/imx/imx-fb.c
 create mode 100644 drivers/gpu/drm/imx/imx-fbdev.c
 create mode 100644 drivers/gpu/drm/imx/imx-gem.c
 create mode 100644 drivers/gpu/drm/imx/imx-lcdc-crtc.c
 create mode 100644 drivers/gpu/drm/imx/imx-parallel-display.c

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-04-09 17:56 Martynov Semen
  2012-04-10  2:26 ` Vladimir Murzin
  0 siblings, 1 reply; 335+ messages in thread
From: Martynov Semen @ 2012-04-09 17:56 UTC (permalink / raw)
  To: kernelnewbies

Good afternoon,

I would like to understand, why I can't make the built-in object, when my code is in a folder /samples...

I have my module-code and if I put it in a folder /samples, I can receive only loadable module (.ko) but if I want to receive the built-in object - it turns out nothing (.?-file is created, but my code doesn't get in a kernel). When I allocate my module-code in any other folder (for example, /drivers) it works normally - I can receive .ko and I can make the built-in object.

Question - why I can't receive the built-in object when my code is in the folder /samples? What instruction in a make-file restricts it, and how?

P.S.: Sorry for my english.
-- 
Best regards,
Semen A Martynov.

Saint Petersburg, Russia.
https://www.facebook.com/semen.martynov

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-04-05  7:54 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2012-04-05  7:54 UTC (permalink / raw)
  To: ath9k-devel

relative to noise floor in dB."



Adrian

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-04-05  7:54 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2012-04-05  7:54 UTC (permalink / raw)
  To: ath9k-devel

relative to noise floor in dB.&quot;<br>
<span class=3D"HOEnZb"><font color=3D"#888888"><br>
<br>
<br>
Adrian<br>
</font></span></blockquote></div><br></div>

--bcaec52be6d10f215404c0d1b26d--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-03-20 18:28 John Szakmeister
  0 siblings, 0 replies; 335+ messages in thread
From: John Szakmeister @ 2012-03-20 18:28 UTC (permalink / raw)
  To: linux-arm-kernel

We've been running into several issues on the cache flushing front,
and I'm hoping that someone here can help clarify what should be
happening from a kernel perspective.

Late last year we discovered a few interesting problems.  One of them
is definitely our fault: we weren't flushing the cache after we read
data from a block device a wrote it into the page.  However, there was
another issue we noticed that made less sense: we had to flush a page
before writing it to our block device, otherwise we end up writing
some stale data.  The brd device ran into this issue before, and fixed
it in commit c2572f2b[1].  In that commit Nick Pidgin says:
    "brd is missing a flush_dcache_page. On 2nd thoughts, perhaps it is the
     pagecache's responsibility to flush user virtual aliases (the driver of
     course should flush kernel virtual mappings)... but anyway, there
     already exists cache flushing for one direction of transfer, so we
     should add the other."

I can't help but to feel he's right.  It was very surprising to me
that I had to flush the user virtual aliases before writing the data
to the device.  Is it expected that we (as device driver writers) have
to do that for block device drivers?  I love Linux, but one of the
aspects I find most frustrating is that I don't know what I can safely
assume at interface boundaries.  Even modeling my work after existing
code yields problems, because a number of drivers in the tree seem to
be broken in this regard.

But it leads to another concern.  Since I do have to flush on writes,
it got me thinking about whether it's necessary to flush user mode
aliases before conducting a read.  Consider the fact that a page can
span multiple blocks.  Is it possible that:
  * we're asked to read a block of data
  * a user app has scribbled on the page (so it's dirty, but not flushed)
  * we read the requested data from the device
  * load it into the page
  * do a flush_dcache_page()
  * then the data read from the device becomes corrupt because cached user data
    is written to RAM?

Or, instead of that, the cached data gets dropped entirely because it
was on the page, but shouldn't have been because we didn't read new
data into that area, and now that user data is lost?  I confess this
may all be my lack of understanding about Linux's block i/o subsystem,
but I'm thoroughly confused at this point.  What I do know is that
other device drivers are not flushing the page before writing the data
to a device.  For instance, the mmc driver for the at91 architecture
suffers from this problem, and I've been able to see that problem
using mmap.  My concern is that many other drivers also suffer from
this problem, so I'm not sure what the fix needs to be: fix the page
cache, fix the driver, or both.

Also, is there somewhere that says what's guaranteed on entry into my
block device driver?  I've scoured everything I could find... the
Documentation area (including cachetlb.txt), Linux sites, books...
I've yet to find anything mentioning the need to call
flush_dcache_page() much less talk about what the assumptions are.

Thanks in advance for the help.

-John

[1]: <http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=c2572f2b4ffc27ba79211aceee3bef53a59bb5cd>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-02-27  5:00 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2012-02-27  5:00 UTC (permalink / raw)
  To: ath9k-devel

actually useful for narrowing down the source of this issue...

- Felix

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-02-27  5:00 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2012-02-27  5:00 UTC (permalink / raw)
  To: ath9k-devel

;f=3Dhostapd/hostapd.conf),  I
cannot find what wme_enabled is.

=20

-          What does wme_enabled do ? Is it needed in conjunction with =
ht_capab ?

Another question, I live in CH, a reboot shows=20

[    9.201363] ath: Country alpha2 being used: AU

And changed it to CH.=20

=20

-          Which limitation can I expect, for not being a European Card, =
as it propagates AU ?

=20

Below I added lspci, iw list, hostapd.conf, dmesg output.

http://www.tp-link.com/en/products/details/?model=3DTL-WDN4800#spec

=20

Thanks for your help

Angela

=20

# lspci -vvd 168c:

02:00.0 Network controller: Atheros Communications Inc. AR9300 Wireless =
LAN adaptor (rev 01)

        Subsystem: Atheros Communications Inc. Device 3112

        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- =
ParErr- Stepping- SERR- FastB2B- DisINTx-

        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- =
<TAbort- <MAbort- >SERR- <PERR- INTx-

        Latency: 0, Cache Line Size: 64 bytes

        Interrupt: pin A routed to IRQ 17

        Region 0: Memory at fbe00000 (64-bit, non-prefetchable) =
[size=3D128K]

        Expansion ROM at fbe20000 [disabled] [size=3D64K]

        Capabilities: [40] Power Management version 3

                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=3D375mA =
PME(D0+,D1+,D2-,D3hot+,D3cold-)

                Status: D0 NoSoftRst- PME-Enable- DSel=3D0 DScale=3D0 =
PME-

        Capabilities: [50] MSI: Enable- Count=3D1/4 Maskable+ 64bit+

                Address: 0000000000000000  Data: 0000

                Masking: 00000000  Pending: 00000000

        Capabilities: [70] Express (v2) Endpoint, MSI 00

                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s =
<1us, L1 <8us

                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-

                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- =
Unsupported-

                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

                        MaxPayload 128 bytes, MaxReadReq 512 bytes

                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- =
TransPend-

                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, =
Latency L0 <2us, L1 <64us

                        ClockPM- Surprise- LLActRep- BwNot-

                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- =
CommClk+

                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ =
DLActive- BWMgmt- ABWMgmt-

                DevCap2: Completion Timeout: Not Supported, TimeoutDis+

                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-

                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- =
SpeedDis-, Selectable De-emphasis: -6dB

                         Transmit Margin: Normal Operating Range, =
EnterModifiedCompliance- ComplianceSOS-

                         Compliance De-emphasis: -6dB

                LnkSta2: Current De-emphasis Level: -6dB

        Capabilities: [100 v1] Advanced Error Reporting

                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- =
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- =
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- =
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- =
NonFatalErr-

                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- =
NonFatalErr+

                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- =
ChkEn-

        Capabilities: [140 v1] Virtual Channel

                Caps:   LPEVC=3D0 RefClk=3D100ns PATEntryBits=3D1

                Arb:    Fixed- WRR32- WRR64- WRR128-

                Ctrl:   ArbSelect=3DFixed

                Status: InProgress-

                VC0:    Caps:   PATOffset=3D00 MaxTimeSlots=3D1 =
RejSnoopTrans-

                       Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- =
WRR256-

                        Ctrl:   Enable+ ID=3D0 ArbSelect=3DFixed =
TC/VC=3D01

                        Status: NegoPending- InProgress-

        Capabilities: [300 v1] Device Serial Number =
00-00-00-00-00-00-00-00

        Kernel driver in use: ath9k

        Kernel modules: ath9k

=20

=20

# iw list

Wiphy phy0

        Band 1:

                Capabilities: 0x11ef

                        RX LDCP

                        HT20/HT40

                        SM Power Save disabled

                        RX HT20 SGI

                        RX HT40 SGI

                        TX STBC

                        RX STBC 1-stream

                        Max AMSDU length: 7935 bytes

                        DSSS/CCK HT40

                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)

                Minimum RX AMPDU time spacing: 8 usec (0x06)

                HT TX/RX MCS rate indexes supported: 0-23

                Frequencies:

                        * 2412 MHz [1] (20.0 dBm)

                        * 2417 MHz [2] (20.0 dBm)

                        * 2422 MHz [3] (20.0 dBm)

                        * 2427 MHz [4] (20.0 dBm)

                        * 2432 MHz [5] (20.0 dBm)

                        * 2437 MHz [6] (20.0 dBm)

                        * 2442 MHz [7] (20.0 dBm)

                        * 2447 MHz [8] (20.0 dBm)

                        * 2452 MHz [9] (20.0 dBm)

                        * 2457 MHz [10] (20.0 dBm)

                        * 2462 MHz [11] (20.0 dBm)

                        * 2467 MHz [12] (20.0 dBm)

                        * 2472 MHz [13] (20.0 dBm)

                        * 2484 MHz [14] (disabled)

                Bitrates (non-HT):

                        * 1.0 Mbps

                        * 2.0 Mbps (short preamble supported)

                        * 5.5 Mbps (short preamble supported)

                        * 11.0 Mbps (short preamble supported)

                        * 6.0 Mbps

                        * 9.0 Mbps

                        * 12.0 Mbps

                        * 18.0 Mbps

                        * 24.0 Mbps

                        * 36.0 Mbps

                        * 48.0 Mbps

                        * 54.0 Mbps

        Band 2:

                Capabilities: 0x11ef

                        RX LDCP

                        HT20/HT40

                        SM Power Save disabled

                        RX HT20 SGI

                        RX HT40 SGI

                        TX STBC

                        RX STBC 1-stream

                        Max AMSDU length: 7935 bytes

                        DSSS/CCK HT40

                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)

                Minimum RX AMPDU time spacing: 8 usec (0x06)

                HT TX/RX MCS rate indexes supported: 0-23

                Frequencies:

                        * 5180 MHz [36] (20.0 dBm)

                        * 5200 MHz [40] (20.0 dBm)

                        * 5220 MHz [44] (20.0 dBm)

                        * 5240 MHz [48] (20.0 dBm)

                        * 5260 MHz [52] (20.0 dBm) (passive scanning, no =
IBSS, radar detection)

                        * 5280 MHz [56] (20.0 dBm) (passive scanning, no =
IBSS, radar detection)

                        * 5300 MHz [60] (20.0 dBm) (passive scanning, no =
IBSS, radar detection)

                        * 5320 MHz [64] (20.0 dBm) (passive scanning, no =
IBSS, radar detection)

                        * 5500 MHz [100] (disabled)

                        * 5520 MHz [104] (disabled)

                        * 5540 MHz [108] (disabled)

                        * 5560 MHz [112] (disabled)

                        * 5580 MHz [116] (disabled)

                        * 5600 MHz [120] (disabled)

                        * 5620 MHz [124] (disabled)

                        * 5640 MHz [128] (disabled)

                        * 5660 MHz [132] (disabled)

                        * 5680 MHz [136] (disabled)

                        * 5700 MHz [140] (disabled)

                        * 5745 MHz [149] (disabled)

                        * 5765 MHz [153] (disabled)

                        * 5785 MHz [157] (disabled)

                        * 5805 MHz [161] (disabled)

                        * 5825 MHz [165] (disabled)

                Bitrates (non-HT):

                        * 6.0 Mbps

                        * 9.0 Mbps

                        * 12.0 Mbps

                        * 18.0 Mbps

                        * 24.0 Mbps

                        * 36.0 Mbps

                        * 48.0 Mbps

                        * 54.0 Mbps

        max # scan SSIDs: 4

        Supported interface modes:

                 * IBSS

                 * managed

                 * AP

                 * AP/VLAN

                 * WDS

                 * monitor

                 * mesh point

                 * Unknown mode (8)

                 * Unknown mode (9)

        Supported commands:

                 * new_interface

                 * set_interface

                 * new_key

                 * new_beacon

                 * new_station

                 * new_mpath

                 * set_mesh_params

                 * set_bss

                 * authenticate

                 * associate

                 * deauthenticate

                 * disassociate

                 * join_ibss

                 * Unknown command (68)

                 * Unknown command (55)

                 * Unknown command (57)

                 * Unknown command (59)

                 * Unknown command (67)

                 * set_wiphy_netns

                 * Unknown command (65)

                 * Unknown command (66)

                 * Unknown command (82)

                 * Unknown command (81)

                 * Unknown command (84)

                 * Unknown command (87)

                 * Unknown command (85)

                 * testmode

                 * connect

                 * disconnect

=20

=20

# cat /etc/hostapd.conf

# Schnittstelle und Treiber

interface=3Dwlan0

driver=3Dnl80211

=20

# WLAN-Konfiguration

ssid=3Dxxxx

channel=3D6

=20

# ESSID sichtbar

ignore_broadcast_ssid=3D0

=20

# L=E4ndereinstellungen

country_code=3DCH

ieee80211d=3D1

=20

# =DCbertragungsmodus

hw_mode=3Dg

# Optionale Einstellungen

# supported_rates=3D10 20 55 110 60 90 120 180 240 360 480 540

=20

# Draft-N Modus aktivieren / optional nur f=FCr entsprechende Karten

# ieee80211n=3D1

ieee80211n=3D1

=20

# Beacons

beacon_int=3D100

dtim_period=3D2

=20

# MAC-Authentifizierung

macaddr_acl=3D0

=20

# max. Anzahl der Clients

max_num_sta=3D255

=20

# Gr=F6=DFe der Datenpakete/Begrenzung

rts_threshold=3D2347

fragm_threshold=3D2346

=20

# hostapd Log Einstellungen

logger_syslog=3D-1

logger_syslog_level=3D2

logger_stdout=3D-1

logger_stdout_level=3D2

=20

# tempor=E4re Konfigurationsdateien

dump_file=3D/tmp/hostapd.dump

ctrl_interface=3D/var/run/hostapd

ctrl_interface_group=3D0

=20

# Authentifizierungsoptionen

auth_algs=3D1

=20

# wmm-Funktionalit=E4t

wmm_enabled=3D0

=20

# Verschl=FCsselung / hier rein WPA2

macaddr_acl=3D0

wpa=3D2

rsn_preauth=3D1

rsn_preauth_interfaces=3Dwlan0

wpa_key_mgmt=3DWPA-PSK

wpa_pairwise=3DTKIP

rsn_pairwise=3DCCMP

=20

# Schl=FCsselintervalle / Standardkonfiguration

wpa_group_rekey=3D600

wpa_ptk_rekey=3D600

wpa_gmk_rekey=3D86400

=20

# Zugangsschl=FCssel (PSK) / hier in Klartext (ASCII)

wpa_passphrase=3Dxxxx

=20

=20

[    0.000000] Linux version 3.3.0-rc2-1+ (root@linux) (gcc version =
4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #1 SMP Tue Feb 14
13:17:34 CET 2012

[    0.000000] Command line: BOOT_IMAGE=3D/vmlinuz-3.3.0-rc2-1+ =
root=3DUUID=3Dcfc15d9c-2cd1-4bad-9e9d-f2fa1ded76e2 ro

[    9.201360] ath: EEPROM regdomain: 0x21

[    9.201362] ath: EEPROM indicates we should expect a direct regpair =
map

[    9.201363] ath: Country alpha2 being used: AU

[    9.201364] ath: Regpair used: 0x21

[    9.531824] ieee80211 phy0: Selected rate control algorithm =
'ath9k_rate_control'

[    9.532132] Registered led device: ath9k-phy0

[    7.594696] cfg80211: Calling CRDA to update world regulatory domain

[    8.966680] cfg80211: World regulatory domain updated:

[    8.966682] cfg80211:   (start_freq - end_freq @ bandwidth), =
(max_antenna_gain, max_eirp)

[    8.966684] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    8.966686] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 =
mBi, 2000 mBm)

[    8.966687] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 =
mBi, 2000 mBm)

[    8.966688] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    8.966689] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.201366] cfg80211: Updating information on frequency 2412 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201368] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.201369] cfg80211: Updating information on frequency 2417 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201370] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.201371] cfg80211: Updating information on frequency 2422 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201373] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.201374] cfg80211: Updating information on frequency 2427 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201375] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.201376] cfg80211: Updating information on frequency 2432 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201378] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.201379] cfg80211: Updating information on frequency 2437 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201380] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.201381] cfg80211: Updating information on frequency 2442 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201383] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.201384] cfg80211: Updating information on frequency 2447 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201385] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.201386] cfg80211: Updating information on frequency 2452 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201388] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.201389] cfg80211: Updating information on frequency 2457 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201390] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.201391] cfg80211: Updating information on frequency 2462 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201393] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.201394] cfg80211: Disabling freq 2467 MHz as custom regd has no =
rule that fits a 20 MHz wide channel

[    9.201395] cfg80211: Disabling freq 2472 MHz as custom regd has no =
rule that fits a 20 MHz wide channel

[    9.201396] cfg80211: Disabling freq 2484 MHz as custom regd has no =
rule that fits a 20 MHz wide channel

[    9.201398] cfg80211: Updating information on frequency 5180 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201399] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A =
mBi, 3000 mBm)

[    9.201400] cfg80211: Updating information on frequency 5200 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201402] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A =
mBi, 3000 mBm)

[    9.201403] cfg80211: Updating information on frequency 5220 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201404] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A =
mBi, 3000 mBm)

[    9.201405] cfg80211: Updating information on frequency 5240 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201407] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A =
mBi, 3000 mBm)

[    9.201408] cfg80211: Updating information on frequency 5260 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201409] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A =
mBi, 3000 mBm)

[    9.201410] cfg80211: Updating information on frequency 5280 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201412] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A =
mBi, 3000 mBm)

[    9.201413] cfg80211: Updating information on frequency 5300 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201414] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A =
mBi, 3000 mBm)

[    9.201415] cfg80211: Updating information on frequency 5320 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201417] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A =
mBi, 3000 mBm)

[    9.201418] cfg80211: Disabling freq 5500 MHz as custom regd has no =
rule that fits a 20 MHz wide channel

[    9.201419] cfg80211: Disabling freq 5520 MHz as custom regd has no =
rule that fits a 20 MHz wide channel

[    9.201420] cfg80211: Disabling freq 5540 MHz as custom regd has no =
rule that fits a 20 MHz wide channel

[    9.201422] cfg80211: Disabling freq 5560 MHz as custom regd has no =
rule that fits a 20 MHz wide channel

[    9.201423] cfg80211: Disabling freq 5580 MHz as custom regd has no =
rule that fits a 20 MHz wide channel

[    9.201424] cfg80211: Disabling freq 5600 MHz as custom regd has no =
rule that fits a 20 MHz wide channel

[    9.201425] cfg80211: Disabling freq 5620 MHz as custom regd has no =
rule that fits a 20 MHz wide channel

[    9.201426] cfg80211: Disabling freq 5640 MHz as custom regd has no =
rule that fits a 20 MHz wide channel

[    9.201428] cfg80211: Disabling freq 5660 MHz as custom regd has no =
rule that fits a 20 MHz wide channel

[    9.201429] cfg80211: Disabling freq 5680 MHz as custom regd has no =
rule that fits a 20 MHz wide channel

[    9.201430] cfg80211: Disabling freq 5700 MHz as custom regd has no =
rule that fits a 20 MHz wide channel

[    9.201431] cfg80211: Updating information on frequency 5745 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201433] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A =
mBi, 3000 mBm)

[    9.201434] cfg80211: Updating information on frequency 5765 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201435] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A =
mBi, 3000 mBm)

[    9.201436] cfg80211: Updating information on frequency 5785 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201438] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A =
mBi, 3000 mBm)

[    9.201439] cfg80211: Updating information on frequency 5805 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201440] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A =
mBi, 3000 mBm)

[    9.201441] cfg80211: Updating information on frequency 5825 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.201443] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A =
mBi, 3000 mBm)

[    9.202827] cfg80211: Updating information on frequency 2412 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202829] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202830] cfg80211: Updating information on frequency 2417 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202831] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202833] cfg80211: Updating information on frequency 2422 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202834] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202845] cfg80211: Updating information on frequency 2427 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202847] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202848] cfg80211: Updating information on frequency 2432 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202849] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202851] cfg80211: Updating information on frequency 2437 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202852] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202853] cfg80211: Updating information on frequency 2442 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202855] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202856] cfg80211: Updating information on frequency 2447 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202857] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202859] cfg80211: Updating information on frequency 2452 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202860] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202861] cfg80211: Updating information on frequency 2457 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202863] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202864] cfg80211: Updating information on frequency 2462 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202865] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202867] cfg80211: Updating information on frequency 2467 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202868] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 =
mBi, 2000 mBm)

[    9.202869] cfg80211: Updating information on frequency 2472 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202871] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 =
mBi, 2000 mBm)

[    9.202872] cfg80211: Updating information on frequency 2484 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202874] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 =
mBi, 2000 mBm)

[    9.202875] cfg80211: Updating information on frequency 5180 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202877] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202878] cfg80211: Updating information on frequency 5200 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202879] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202881] cfg80211: Updating information on frequency 5220 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202882] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202884] cfg80211: Updating information on frequency 5240 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202885] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202887] cfg80211: Disabling freq 5260 MHz

[    9.202897] cfg80211: Disabling freq 5280 MHz

[    9.202898] cfg80211: Disabling freq 5300 MHz

[    9.202899] cfg80211: Disabling freq 5320 MHz

[    9.202900] cfg80211: Disabling freq 5500 MHz

[    9.202901] cfg80211: Disabling freq 5520 MHz

[    9.202901] cfg80211: Disabling freq 5540 MHz

[    9.202902] cfg80211: Disabling freq 5560 MHz

[    9.202903] cfg80211: Disabling freq 5580 MHz

[    9.202904] cfg80211: Disabling freq 5600 MHz

[    9.202905] cfg80211: Disabling freq 5620 MHz

[    9.202905] cfg80211: Disabling freq 5640 MHz

[    9.202916] cfg80211: Disabling freq 5660 MHz

[    9.202917] cfg80211: Disabling freq 5680 MHz

[    9.202918] cfg80211: Disabling freq 5700 MHz

[    9.202919] cfg80211: Updating information on frequency 5745 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202920] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202921] cfg80211: Updating information on frequency 5765 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202923] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202924] cfg80211: Updating information on frequency 5785 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202925] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202926] cfg80211: Updating information on frequency 5805 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202928] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.202929] cfg80211: Updating information on frequency 5825 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.202930] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 =
mBi, 2000 mBm)

[    9.532113] cfg80211: Calling CRDA for country: AU

[    9.533522] cfg80211: Updating information on frequency 2412 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533524] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.533525] cfg80211: Updating information on frequency 2417 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533527] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.533528] cfg80211: Updating information on frequency 2422 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533530] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.533531] cfg80211: Updating information on frequency 2427 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533533] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.533534] cfg80211: Updating information on frequency 2432 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533535] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.533537] cfg80211: Updating information on frequency 2437 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533538] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.533539] cfg80211: Updating information on frequency 2442 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533541] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.533542] cfg80211: Updating information on frequency 2447 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533544] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.533545] cfg80211: Updating information on frequency 2452 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533546] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.533547] cfg80211: Updating information on frequency 2457 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533549] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.533550] cfg80211: Updating information on frequency 2462 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533552] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.533553] cfg80211: Updating information on frequency 2467 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533554] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.533556] cfg80211: Updating information on frequency 2472 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533557] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)

[    9.533558] cfg80211: Disabling freq 2484 MHz

[    9.533559] cfg80211: Updating information on frequency 5180 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533561] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 =
mBi, 2300 mBm)

[    9.533562] cfg80211: Updating information on frequency 5200 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533564] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 =
mBi, 2300 mBm)

[    9.533565] cfg80211: Updating information on frequency 5220 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533566] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 =
mBi, 2300 mBm)

[    9.533568] cfg80211: Updating information on frequency 5240 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533569] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 =
mBi, 2300 mBm)

[    9.533570] cfg80211: Updating information on frequency 5260 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533572] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 =
mBi, 2300 mBm)

[    9.533573] cfg80211: Updating information on frequency 5280 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533575] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 =
mBi, 2300 mBm)

[    9.533576] cfg80211: Updating information on frequency 5300 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533577] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 =
mBi, 2300 mBm)

[    9.533579] cfg80211: Updating information on frequency 5320 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533580] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 =
mBi, 2300 mBm)

[    9.533581] cfg80211: Disabling freq 5500 MHz

[    9.533582] cfg80211: Disabling freq 5520 MHz

[    9.533583] cfg80211: Disabling freq 5540 MHz

[    9.533584] cfg80211: Disabling freq 5560 MHz

[    9.533585] cfg80211: Disabling freq 5580 MHz

[    9.533585] cfg80211: Disabling freq 5600 MHz

[    9.533586] cfg80211: Disabling freq 5620 MHz

[    9.533587] cfg80211: Disabling freq 5640 MHz

[    9.533588] cfg80211: Disabling freq 5660 MHz

[    9.533589] cfg80211: Disabling freq 5680 MHz

[    9.533590] cfg80211: Disabling freq 5700 MHz

[    9.533591] cfg80211: Updating information on frequency 5745 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533592] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 =
mBi, 3000 mBm)

[    9.533593] cfg80211: Updating information on frequency 5765 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533595] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 =
mBi, 3000 mBm)

[    9.533596] cfg80211: Updating information on frequency 5785 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533597] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 =
mBi, 3000 mBm)

[    9.533599] cfg80211: Updating information on frequency 5805 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533600] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 =
mBi, 3000 mBm)

[    9.533601] cfg80211: Updating information on frequency 5825 MHz for =
a 20 MHz width channel with regulatory rule:

[    9.533603] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 =
mBi, 3000 mBm)

[    9.533606] cfg80211: Regulatory domain changed to country: AU

[    9.533607] cfg80211:   (start_freq - end_freq @ bandwidth), =
(max_antenna_gain, max_eirp)

[    9.533608] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), =
(N/A, 2000 mBm)

[    9.533609] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 =
mBi, 2300 mBm)

[    9.533611] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 =
mBi, 2300 mBm)

[    9.533612] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 =
mBi, 3000 mBm)


------=_NextPart_000_0CFF_01CD01BB.A7359070
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<html xmlns:v=3D"urn:schemas-microsoft-com:vml" =
xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" =
xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta =
http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1"><meta name=3DGenerator content=3D"Microsoft Word =
12 (filtered medium)"><style><!--
/* Font Definitions */
@font-face
	{font-family:Wingdings;
	panose-1:5 0 0 0 0 0 0 0 0 0;}
@font-face
	{font-family:Wingdings;
	panose-1:5 0 0 0 0 0 0 0 0 0;}
@font-face
	{font-family:Calibri;
	panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
	{margin:0cm;
	margin-bottom:.0001pt;
	font-size:11.0pt;
	font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
	{mso-style-priority:99;
	color:blue;
	text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
	{mso-style-priority:99;
	color:purple;
	text-decoration:underline;}
p.MsoListParagraph, li.MsoListParagraph, div.MsoListParagraph
	{mso-style-priority:34;
	margin-top:0cm;
	margin-right:0cm;
	margin-bottom:0cm;
	margin-left:36.0pt;
	margin-bottom:.0001pt;
	font-size:11.0pt;
	font-family:"Calibri","sans-serif";}
span.EmailStyle17
	{mso-style-type:personal-compose;
	font-family:"Calibri","sans-serif";
	color:windowtext;}
.MsoChpDefault
	{mso-style-type:export-only;}
@page WordSection1
	{size:612.0pt 792.0pt;
	margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.WordSection1
	{page:WordSection1;}
/* List Definitions */
@list l0
	{mso-list-id:1667975767;
	mso-list-type:hybrid;
	mso-list-template-ids:1557444888 -1730749342 67698691 67698693 67698689 =
67698691 67698693 67698689 67698691 67698693;}
@list l0:level1
	{mso-level-start-at:2012;
	mso-level-number-format:bullet;
	mso-level-text:-;
	mso-level-tab-stop:none;
	mso-level-number-position:left;
	text-indent:-18.0pt;
	font-family:"Calibri","sans-serif";
	mso-fareast-font-family:Calibri;
	mso-bidi-font-family:"Times New Roman";}
ol
	{margin-bottom:0cm;}
ul
	{margin-bottom:0cm;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]--></head><body lang=3DEN-US link=3Dblue =
vlink=3Dpurple><div class=3DWordSection1><p =
class=3DMsoNormal>Hello<o:p></o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p class=3DMsoNormal>I have a TP =
Link WDN4800 (ar9380). A Windows 802.11n client showed 72Mb connection, =
150Mb should be possible. inSSIDer showed 195Mb. I want to have it =
optimized for 2.4Ghz. <o:p></o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p class=3DMsoNormal>iw =
list:<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 RX LDCP<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =
=A0=A0=A0=A0=A0=A0=A0=A0HT20/HT40<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 SM Power Save disabled<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 RX HT20 SGI<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 RX HT40 SGI<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 TX STBC<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 RX STBC 1-stream<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 Max AMSDU length: 7935 bytes<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 DSSS/CCK HT40<o:p></o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p class=3DMsoNormal>I =
haven&#8217;t found a complete guide (<a =
href=3D"http://linuxwireless.org/en/users/Documentation/hostapd">http://l=
inuxwireless.org/en/users/Documentation/hostapd</a>) for the ht_capab =
settings or some guidance to map them from iw list. Iw list shows HT20, =
what should/can be used, HT20, or HT20- or HT20+, with or without HT40*. =
Mapping to much seems also not to good.<o:p></o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p class=3DMsoListParagraph =
style=3D'text-indent:-18.0pt;mso-list:l0 level1 lfo1'><![if =
!supportLists]><span style=3D'mso-list:Ignore'>-<span =
style=3D'font:7.0pt "Times New =
Roman"'>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =
</span></span><![endif]>What are the most optimized settings for =
ht_capab ?<o:p></o:p></p><p class=3DMsoNormal><o:p>&nbsp;</o:p></p><p =
class=3DMsoNormal>From the guide and hostapd.conf (<a =
href=3D"http://hostap.epitest.fi/gitweb/gitweb.cgi?p=3Dhostap.git;a=3Dblo=
b_plain;f=3Dhostapd/hostapd.conf">http://hostap.epitest.fi/gitweb/gitweb.=
cgi?p=3Dhostap.git;a=3Dblob_plain;f=3Dhostapd/hostapd.conf</a>), =A0I =
cannot find what wme_enabled is.<o:p></o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p class=3DMsoListParagraph =
style=3D'text-indent:-18.0pt;mso-list:l0 level1 lfo1'><![if =
!supportLists]><span style=3D'mso-list:Ignore'>-<span =
style=3D'font:7.0pt "Times New =
Roman"'>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =
</span></span><![endif]>What does wme_enabled do ? Is it needed in =
conjunction with ht_capab ?<o:p></o:p></p><p class=3DMsoNormal> =
<o:p></o:p></p><p class=3DMsoNormal>Another question, I live in CH, a =
reboot shows <o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201363] =
ath: Country alpha2 being used: AU<o:p></o:p></p><p =
class=3DMsoNormal>And changed it to CH. <o:p></o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p class=3DMsoListParagraph =
style=3D'text-indent:-18.0pt;mso-list:l0 level1 lfo1'><![if =
!supportLists]><span style=3D'mso-list:Ignore'>-<span =
style=3D'font:7.0pt "Times New =
Roman"'>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =
</span></span><![endif]>Which limitation can I expect, for not being a =
European Card, as it propagates AU ?<o:p></o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p class=3DMsoNormal>Below I =
added lspci, iw list, hostapd.conf, dmesg output.<o:p></o:p></p><p =
class=3DMsoNormal><a =
href=3D"http://www.tp-link.com/en/products/details/?model=3DTL-WDN4800#sp=
ec">http://www.tp-link.com/en/products/details/?model=3DTL-WDN4800#spec</=
a><o:p></o:p></p><p class=3DMsoNormal><o:p>&nbsp;</o:p></p><p =
class=3DMsoNormal>Thanks for your help<o:p></o:p></p><p =
class=3DMsoNormal>Angela<o:p></o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p class=3DMsoNormal># lspci -vvd =
168c:<o:p></o:p></p><p class=3DMsoNormal>02:00.0 Network controller: =
Atheros Communications Inc. AR9300 Wireless LAN adaptor (rev =
01)<o:p></o:p></p><p class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 Subsystem: =
Atheros Communications Inc. Device 3112<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 Control: I/O+ Mem+ BusMaster+ =
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- =
DisINTx-<o:p></o:p></p><p class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 <span =
lang=3DDE-CH>Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast =
&gt;TAbort- &lt;TAbort- &lt;MAbort- &gt;SERR- &lt;PERR- =
INTx-<o:p></o:p></span></p><p class=3DMsoNormal><span =
lang=3DDE-CH>=A0=A0=A0=A0=A0=A0=A0 </span>Latency: 0, Cache Line Size: =
64 bytes<o:p></o:p></p><p class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 =
Interrupt: pin A routed to IRQ 17<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 Region 0: Memory at fbe00000 =
(64-bit, non-prefetchable) [size=3D128K]<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 Expansion ROM at fbe20000 =
[disabled] [size=3D64K]<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 Capabilities: [40] Power =
Management version 3<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Flags: =
PMEClk- DSI- D1+ D2- AuxCurrent=3D375mA =
PME(D0+,D1+,D2-,D3hot+,D3cold-)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Status: =
D0 NoSoftRst- PME-Enable- DSel=3D0 DScale=3D0 PME-<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 Capabilities: [50] MSI: Enable- =
Count=3D1/4 Maskable+ 64bit+<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Address: =
0000000000000000=A0 Data: 0000<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Masking: =
00000000=A0 Pending: 00000000<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 Capabilities: [70] Express (v2) =
Endpoint, MSI 00<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 DevCap: =
MaxPayload 128 bytes, PhantFunc 0, Latency L0s &lt;1us, L1 =
&lt;8us<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 <span lang=3DDE-CH>ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ =
FLReset-<o:p></o:p></span></p><p class=3DMsoNormal><span =
lang=3DDE-CH>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =
</span>DevCtl: Report errors: Correctable- Non-Fatal- Fatal- =
Unsupported-<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 RlxdOrd- ExtTag- PhantFunc- AuxPwr- =
NoSnoop-<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 MaxPayload 128 bytes, MaxReadReq 512 bytes<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 DevSta: =
CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- =
TransPend-<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 LnkCap: =
Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 &lt;2us, L1 =
&lt;64us<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 ClockPM- Surprise- LLActRep- BwNot-<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 LnkCtl: =
ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 ExtSynch- ClockPM- AutWidDis- BWInt- =
AutBWInt-<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 LnkSta: =
Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- =
ABWMgmt-<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 DevCap2: =
Completion Timeout: Not Supported, TimeoutDis+<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 DevCtl2: =
Completion Timeout: 50us to 50ms, TimeoutDis-<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 LnkCtl2: =
Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable =
De-emphasis: -6dB<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0=A0 Transmit Margin: Normal Operating Range, =
EnterModifiedCompliance- ComplianceSOS-<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0=A0 Compliance De-emphasis: -6dB<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 LnkSta2: =
Current De-emphasis Level: -6dB<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 Capabilities: [100 v1] Advanced =
Error Reporting<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =
UESta:=A0 DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- =
MalfTLP- ECRC- UnsupReq- ACSViol-<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =
=A0=A0UEMsk:=A0 DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- =
MalfTLP- ECRC- UnsupReq- ACSViol-<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 UESvrt: =
DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- =
UnsupReq- ACSViol-<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =
CESta:=A0 RxErr- BadTLP- BadDLLP- Rollover- Timeout- =
NonFatalErr-<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =
CEMsk:=A0 RxErr- BadTLP- BadDLLP- Rollover- Timeout- =
NonFatalErr+<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 AERCap: =
First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 Capabilities: [140 v1] Virtual =
Channel<o:p></o:p></p><p class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0 =
=A0=A0=A0=A0=A0=A0=A0Caps:=A0=A0 LPEVC=3D0 RefClk=3D100ns =
PATEntryBits=3D1<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =
Arb:=A0=A0=A0 Fixed- WRR32- WRR64- WRR128-<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =
Ctrl:=A0=A0 ArbSelect=3DFixed<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Status: =
InProgress-<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =
VC0:=A0=A0=A0 Caps:=A0=A0 PATOffset=3D00 MaxTimeSlots=3D1 =
RejSnoopTrans-<o:p></o:p></p><p class=3DMsoNormal> =
=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0Arb:=
=A0=A0=A0 Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 Ctrl:=A0=A0 Enable+ ID=3D0 ArbSelect=3DFixed =
TC/VC=3D01<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 Status: NegoPending- InProgress-<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 Capabilities: [300 v1] Device =
Serial Number 00-00-00-00-00-00-00-00<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 Kernel driver in use: =
ath9k<o:p></o:p></p><p class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 Kernel =
modules: ath9k<o:p></o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p class=3DMsoNormal># iw =
list<o:p></o:p></p><p class=3DMsoNormal>Wiphy phy0<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 Band 1:<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =
Capabilities: 0x11ef<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 RX LDCP<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 HT20/HT40<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 SM Power Save disabled<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 RX HT20 SGI<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 RX HT40 SGI<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 TX STBC<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 RX STBC 1-stream<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 Max AMSDU length: 7935 bytes<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 DSSS/CCK HT40<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Maximum =
RX AMPDU length 65535 bytes (exponent: 0x003)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Minimum =
RX AMPDU time spacing: 8 usec (0x06)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 HT TX/RX =
MCS rate indexes supported: 0-23<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =
Frequencies:<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 2412 MHz [1] (20.0 dBm)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 2417 MHz [2] (20.0 dBm)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 2422 MHz [3] (20.0 dBm)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 2427 MHz [4] (20.0 dBm)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 2432 MHz [5] (20.0 dBm)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 2437 MHz [6] (20.0 dBm)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 2442 MHz [7] (20.0 dBm)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 2447 MHz [8] (20.0 dBm)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 2452 MHz [9] (20.0 dBm)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 2457 MHz [10] (20.0 dBm)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 2462 MHz [11] (20.0 dBm)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 2467 MHz [12] (20.0 dBm)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0 =
=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0* 2472 =
MHz [13] (20.0 dBm)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 2484 MHz [14] (disabled)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Bitrates =
(non-HT):<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 1.0 Mbps<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 2.0 Mbps (short preamble supported)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5.5 Mbps (short preamble supported)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 11.0 Mbps (short preamble supported)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 6.0 Mbps<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 9.0 Mbps<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 12.0 Mbps<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 18.0 Mbps<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 24.0 Mbps<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 36.0 Mbps<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 48.0 Mbps<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 54.0 Mbps<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 Band 2:<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =
Capabilities: 0x11ef<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 RX LDCP<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =
=A0=A0=A0=A0=A0=A0=A0=A0HT20/HT40<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 SM Power Save disabled<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 <span lang=3DDE-CH>RX HT20 SGI<o:p></o:p></span></p><p =
class=3DMsoNormal><span =
lang=3DDE-CH>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0 RX HT40 SGI<o:p></o:p></span></p><p class=3DMsoNormal><span =
lang=3DDE-CH>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0 </span>TX STBC<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 RX STBC 1-stream<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 Max AMSDU length: 7935 bytes<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 DSSS/CCK HT40<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Maximum =
RX AMPDU length 65535 bytes (exponent: 0x003)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Minimum =
RX AMPDU time spacing: 8 usec (0x06)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 HT TX/RX =
MCS rate indexes supported: 0-23<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =
Frequencies:<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5180 MHz [36] (20.0 dBm)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5200 MHz [40] (20.0 dBm)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5220 MHz [44] (20.0 dBm)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5240 MHz [48] (20.0 dBm)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5260 MHz [52] (20.0 dBm) (passive scanning, no IBSS, =
radar detection)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5280 MHz [56] (20.0 dBm) (passive scanning, no IBSS, =
radar detection)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5300 MHz [60] (20.0 dBm) (passive scanning, no IBSS, =
radar detection)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5320 MHz [64] (20.0 dBm) (passive scanning, no IBSS, =
radar detection)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5500 MHz [100] (disabled)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5520 MHz [104] (disabled)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5540 MHz [108] (disabled)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5560 MHz [112] (disabled)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5580 MHz [116] (disabled)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5600 MHz [120] (disabled)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5620 MHz [124] (disabled)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
 =A0=A0=A0=A0* 5640 MHz [128] (disabled)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5660 MHz [132] (disabled)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5680 MHz [136] (disabled)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5700 MHz [140] (disabled)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5745 MHz [149] (disabled)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =
=A0=A0=A0=A0=A0=A0=A0=A0* 5765 MHz [153] (disabled)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5785 MHz [157] (disabled)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5805 MHz [161] (disabled)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 5825 MHz [165] (disabled)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Bitrates =
(non-HT):<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 6.0 Mbps<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 9.0 Mbps<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 12.0 Mbps<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 18.0 Mbps<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 24.0 Mbps<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 36.0 Mbps<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 48.0 Mbps<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0 * 54.0 Mbps<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 max # scan SSIDs: =
4<o:p></o:p></p><p class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 Supported =
interface modes:<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
IBSS<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
managed<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
AP<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
AP/VLAN<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
WDS<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
monitor<o:p></o:p></p><p class=3DMsoNormal>=A0=A0=A0=A0=A0=A0 =
=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0* mesh point<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
Unknown mode (8)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
Unknown mode (9)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0 Supported =
commands:<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
new_interface<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
set_interface<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
new_key<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
new_beacon<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0 =A0=A0=A0=A0=A0=A0=A0* =
new_station<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
new_mpath<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
set_mesh_params<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
set_bss<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
authenticate<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
associate<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
deauthenticate<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
disassociate<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
join_ibss<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
Unknown command (68)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
Unknown command (55)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
Unknown command (57)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
Unknown command (59)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
Unknown command (67)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
set_wiphy_netns<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
Unknown command (65)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
Unknown command (66)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
Unknown command (82)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
Unknown command (81)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
Unknown command (84)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
Unknown command (87)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =A0* =
Unknown command (85)<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
testmode<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
connect<o:p></o:p></p><p =
class=3DMsoNormal>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * =
disconnect<o:p></o:p></p><p class=3DMsoNormal><o:p>&nbsp;</o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p class=3DMsoNormal><span =
lang=3DDE-CH># cat /etc/hostapd.conf<o:p></o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH># Schnittstelle und =
Treiber<o:p></o:p></span></p><p =
class=3DMsoNormal>interface=3Dwlan0<o:p></o:p></p><p =
class=3DMsoNormal>driver=3Dnl80211<o:p></o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p class=3DMsoNormal># =
WLAN-Konfiguration<o:p></o:p></p><p =
class=3DMsoNormal>ssid=3Dxxxx<o:p></o:p></p><p =
class=3DMsoNormal>channel=3D6<o:p></o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p class=3DMsoNormal># ESSID =
sichtbar<o:p></o:p></p><p =
class=3DMsoNormal>ignore_broadcast_ssid=3D0<o:p></o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p class=3DMsoNormal><span =
lang=3DDE-CH># L=E4ndereinstellungen<o:p></o:p></span></p><p =
class=3DMsoNormal><span =
lang=3DDE-CH>country_code=3DCH<o:p></o:p></span></p><p =
class=3DMsoNormal><span =
lang=3DDE-CH>ieee80211d=3D1<o:p></o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH><o:p>&nbsp;</o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH># =
=DCbertragungsmodus<o:p></o:p></span></p><p class=3DMsoNormal><span =
lang=3DDE-CH>hw_mode=3Dg<o:p></o:p></span></p><p class=3DMsoNormal><span =
lang=3DDE-CH># Optionale Einstellungen<o:p></o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH># supported_rates=3D10 20 55 110 60 =
90 120 180 240 360 480 540<o:p></o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH><o:p>&nbsp;</o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH># Draft-N Modus aktivieren / =
optional nur f=FCr entsprechende Karten<o:p></o:p></span></p><p =
class=3DMsoNormal># ieee80211n=3D1<o:p></o:p></p><p =
class=3DMsoNormal>ieee80211n=3D1<o:p></o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p class=3DMsoNormal># =
Beacons<o:p></o:p></p><p =
class=3DMsoNormal>beacon_int=3D100<o:p></o:p></p><p =
class=3DMsoNormal><span =
lang=3DDE-CH>dtim_period=3D2<o:p></o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH><o:p>&nbsp;</o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH># =
MAC-Authentifizierung<o:p></o:p></span></p><p class=3DMsoNormal><span =
lang=3DDE-CH>macaddr_acl=3D0<o:p></o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH><o:p>&nbsp;</o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH># max. Anzahl der =
Clients<o:p></o:p></span></p><p class=3DMsoNormal><span =
lang=3DDE-CH>max_num_sta=3D255<o:p></o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH><o:p>&nbsp;</o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH># Gr=F6=DFe der =
Datenpakete/Begrenzung<o:p></o:p></span></p><p class=3DMsoNormal><span =
lang=3DDE-CH>rts_threshold=3D2347<o:p></o:p></span></p><p =
class=3DMsoNormal><span =
lang=3DDE-CH>fragm_threshold=3D2346<o:p></o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH><o:p>&nbsp;</o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH># hostapd Log =
Einstellungen<o:p></o:p></span></p><p class=3DMsoNormal><span =
lang=3DDE-CH>logger_syslog=3D-1<o:p></o:p></span></p><p =
class=3DMsoNormal>logger_syslog_level=3D2<o:p></o:p></p><p =
class=3DMsoNormal>logger_stdout=3D-1<o:p></o:p></p><p =
class=3DMsoNormal>logger_stdout_level=3D2<o:p></o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p class=3DMsoNormal># =
tempor=E4re Konfigurationsdateien<o:p></o:p></p><p =
class=3DMsoNormal>dump_file=3D/tmp/hostapd.dump<o:p></o:p></p><p =
class=3DMsoNormal>ctrl_interface=3D/var/run/hostapd<o:p></o:p></p><p =
class=3DMsoNormal>ctrl_interface_group=3D0<o:p></o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p class=3DMsoNormal><span =
lang=3DDE-CH># Authentifizierungsoptionen<o:p></o:p></span></p><p =
class=3DMsoNormal><span =
lang=3DDE-CH>auth_algs=3D1<o:p></o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH><o:p>&nbsp;</o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH># =
wmm-Funktionalit=E4t<o:p></o:p></span></p><p class=3DMsoNormal><span =
lang=3DDE-CH>wmm_enabled=3D0<o:p></o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH><o:p>&nbsp;</o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH># Verschl=FCsselung / hier rein =
WPA2<o:p></o:p></span></p><p class=3DMsoNormal><span =
lang=3DDE-CH>macaddr_acl=3D0<o:p></o:p></span></p><p =
class=3DMsoNormal>wpa=3D2<o:p></o:p></p><p =
class=3DMsoNormal>rsn_preauth=3D1<o:p></o:p></p><p =
class=3DMsoNormal>rsn_preauth_interfaces=3Dwlan0<o:p></o:p></p><p =
class=3DMsoNormal>wpa_key_mgmt=3DWPA-PSK<o:p></o:p></p><p =
class=3DMsoNormal>wpa_pairwise=3DTKIP<o:p></o:p></p><p =
class=3DMsoNormal>rsn_pairwise=3DCCMP<o:p></o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p class=3DMsoNormal># =
Schl=FCsselintervalle / Standardkonfiguration<o:p></o:p></p><p =
class=3DMsoNormal>wpa_group_rekey=3D600<o:p></o:p></p><p =
class=3DMsoNormal>wpa_ptk_rekey=3D600<o:p></o:p></p><p =
class=3DMsoNormal><span =
lang=3DDE-CH>wpa_gmk_rekey=3D86400<o:p></o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH><o:p>&nbsp;</o:p></span></p><p =
class=3DMsoNormal><span lang=3DDE-CH># Zugangsschl=FCssel (PSK) / hier =
in Klartext (ASCII)<o:p></o:p></span></p><p =
class=3DMsoNormal>wpa_passphrase=3Dxxxx<o:p></o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p =
class=3DMsoNormal><o:p>&nbsp;</o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
0.000000] Linux version 3.3.0-rc2-1+ (root at linux) (gcc version 4.6.1 =
(Ubuntu/Linaro 4.6.1-9ubuntu3) ) #1 SMP Tue Feb 14 13:17:34 CET =
2012<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 0.000000] Command =
line: BOOT_IMAGE=3D/vmlinuz-3.3.0-rc2-1+ =
root=3DUUID=3Dcfc15d9c-2cd1-4bad-9e9d-f2fa1ded76e2 ro<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201360] ath: EEPROM regdomain: =
0x21<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201362] ath: EEPROM =
indicates we should expect a direct regpair map<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201363] ath: Country alpha2 being used: =
AU<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201364] ath: Regpair =
used: 0x21<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.531824] =
ieee80211 phy0: Selected rate control algorithm =
'ath9k_rate_control'<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.532132] Registered led device: ath9k-phy0<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 7.594696] cfg80211: Calling CRDA to update =
world regulatory domain<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
8.966680] cfg80211: World regulatory domain updated:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 8.966682] cfg80211:=A0=A0 (start_freq - =
end_freq @ bandwidth), (max_antenna_gain, max_eirp)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 8.966684] cfg80211:=A0=A0 (2402000 KHz - =
2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 8.966686] cfg80211:=A0=A0 (2457000 KHz - =
2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 8.966687] cfg80211:=A0=A0 (2474000 KHz - =
2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 8.966688] cfg80211:=A0=A0 (5170000 KHz - =
5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 8.966689] cfg80211:=A0=A0 (5735000 KHz - =
5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201366] cfg80211: Updating information on =
frequency 2412 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201368] cfg80211: =
2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201369] cfg80211: =
Updating information on frequency 2417 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.201370] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, =
2000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201371] =
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201373] cfg80211: 2402000 KHz - 2472000 =
KHz @ 40000 KHz), (N/A mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201374] cfg80211: Updating information on =
frequency 2427 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201375] cfg80211: =
2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201376] cfg80211: =
Updating information on frequency 2432 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0 =
=A0=A09.201378] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A =
mBi, 2000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201379] =
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201380] cfg80211: 2402000 KHz - 2472000 =
KHz @ 40000 KHz), (N/A mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201381] cfg80211: Updating information on =
frequency 2442 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201383] cfg80211: =
2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201384] cfg80211: =
Updating information on frequency 2447 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.201385] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, =
2000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201386] =
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201388] cfg80211: 2402000 KHz - 2472000 =
KHz @ 40000 KHz), (N/A mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201389] cfg80211: Updating information on =
frequency 2457 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201390] cfg80211: =
2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201391] cfg80211: =
Updating information on frequency 2462 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.201393] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, =
2000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201394] =
cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a =
20 MHz wide channel<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.201395] cfg80211: Disabling freq 2472 MHz as custom regd has no rule =
that fits a 20 MHz wide channel<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201396] cfg80211: Disabling freq 2484 MHz =
as custom regd has no rule that fits a 20 MHz wide =
channel<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201398] =
cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201399] cfg80211: 5140000 KHz - 5360000 =
KHz @ 40000 KHz), (N/A mBi, 3000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201400] cfg80211: Updating information on =
frequency 5200 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201402] cfg80211: =
5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201403] cfg80211: =
Updating information on frequency 5220 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.201404] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, =
3000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201405] =
cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201407] cfg80211: 5140000 KHz - 5360000 =
KHz @ 40000 KHz), (N/A mBi, 3000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201408] cfg80211: Updating information on =
frequency 5260 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201409] cfg80211: =
5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201410] cfg80211: =
Updating information on frequency 5280 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.201412] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, =
3000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201413] =
cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201414] cfg80211: 5140000 KHz - 5360000 =
KHz @ 40000 KHz), (N/A mBi, 3000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201415] cfg80211: Updating information on =
frequency 5320 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201417] cfg80211: =
5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201418] cfg80211: =
Disabling freq 5500 MHz as custom regd has no rule that fits a 20 MHz =
wide channel<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201419] =
cfg80211: Disabling freq 5520 MHz as custom regd has no rule that fits a =
20 MHz wide channel<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.201420] cfg80211: Disabling freq 5540 MHz as custom regd has no rule =
that fits a 20 MHz wide channel<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201422] cfg80211: Disabling freq 5560 MHz =
as custom regd has no rule that fits a 20 MHz wide =
channel<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201423] =
cfg80211: Disabling freq 5580 MHz as custom regd has no rule that fits a =
20 MHz wide channel<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.201424] cfg80211: Disabling freq 5600 MHz as custom regd has no rule =
that fits a 20 MHz wide channel<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201425] cfg80211: Disabling freq 5620 MHz =
as custom regd has no rule that fits a 20 MHz wide =
channel<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201426] =
cfg80211: Disabling freq 5640 MHz as custom regd has no rule that fits a =
20 MHz wide channel<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.201428] cfg80211: Disabling freq 5660 MHz as custom regd has no rule =
that fits a 20 MHz wide channel<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201429] cfg80211: Disabling freq 5680 MHz =
as custom regd has no rule that fits a 20 MHz wide =
channel<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201430] =
cfg80211: Disabling freq 5700 MHz as custom regd has no rule that fits a =
20 MHz wide channel<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.201431] cfg80211: Updating information on frequency 5745 MHz for a 20 =
MHz width channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201433] cfg80211: 5715000 KHz - 5860000 =
KHz @ 40000 KHz), (N/A mBi, 3000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201434] cfg80211: Updating information on =
frequency 5765 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201435] cfg80211: =
5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201436] cfg80211: =
Updating information on frequency 5785 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.201438] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, =
3000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201439] =
cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201440] cfg80211: 5715000 KHz - 5860000 =
KHz @ 40000 KHz), (N/A mBi, 3000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.201441] cfg80211: Updating information on =
frequency 5825 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.201443] cfg80211: =
5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202827] cfg80211: =
Updating information on frequency 2412 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.202829] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, =
2000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202830] =
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202831] cfg80211: 2402000 KHz - 2472000 =
KHz @ 40000 KHz), (300 mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202833] cfg80211: Updating information on =
frequency 2422 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202834] cfg80211: =
2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202845] cfg80211: =
Updating information on frequency 2427 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.202847] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, =
2000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202848] =
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202849] cfg80211: 2402000 KHz - 2472000 =
KHz @ 40000 KHz), (300 mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202851] cfg80211: Updating information on =
frequency 2437 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202852] cfg80211: =
2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202853] cfg80211: =
Updating information on frequency 2442 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.202855] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, =
2000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202856] =
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202857] cfg80211: 2402000 KHz - 2472000 =
KHz @ 40000 KHz), (300 mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202859] cfg80211: Updating information on =
frequency 2452 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202860] cfg80211: =
2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202861] cfg80211: =
Updating information on frequency 2457 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.202863] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, =
2000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202864] =
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202865] cfg80211: 2402000 KHz - 2472000 =
KHz @ 40000 KHz), (300 mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202867] cfg80211: Updating information on =
frequency 2467 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202868] cfg80211: =
2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202869] cfg80211: =
Updating information on frequency 2472 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.202871] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, =
2000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202872] =
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202874] cfg80211: 2474000 KHz - 2494000 =
KHz @ 20000 KHz), (300 mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202875] cfg80211: Updating information on =
frequency 5180 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202877] cfg80211: =
5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202878] cfg80211: =
Updating information on frequency 5200 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.202879] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, =
2000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202881] =
cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202882] cfg80211: 5170000 KHz - 5250000 =
KHz @ 40000 KHz), (300 mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202884] cfg80211: Updating information on =
frequency 5240 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202885] cfg80211: =
5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202887] cfg80211: =
Disabling freq 5260 MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.202897] cfg80211: Disabling freq 5280 MHz<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202898] cfg80211: Disabling freq 5300 =
MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202899] cfg80211: =
Disabling freq 5320 MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.202900] cfg80211: Disabling freq 5500 MHz<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202901] cfg80211: Disabling freq 5520 =
MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202901] cfg80211: =
Disabling freq 5540 MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.202902] cfg80211: Disabling freq 5560 MHz<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202903] cfg80211: Disabling freq 5580 =
MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202904] cfg80211: =
Disabling freq 5600 MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.202905] cfg80211: Disabling freq 5620 MHz<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202905] cfg80211: Disabling freq 5640 =
MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202916] cfg80211: =
Disabling freq 5660 MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.202917] cfg80211: Disabling freq 5680 MHz<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202918] cfg80211: Disabling freq 5700 =
MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202919] cfg80211: =
Updating information on frequency 5745 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.202920] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, =
2000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202921] =
cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202923] cfg80211: 5735000 KHz - 5835000 =
KHz @ 40000 KHz), (300 mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202924] cfg80211: Updating information on =
frequency 5785 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202925] cfg80211: =
5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202926] cfg80211: =
Updating information on frequency 5805 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.202928] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, =
2000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.202929] =
cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.202930] cfg80211: 5735000 KHz - 5835000 =
KHz @ 40000 KHz), (300 mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.532113] cfg80211: Calling CRDA for =
country: AU<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533522] =
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533524] cfg80211: 2402000 KHz - 2482000 =
KHz @ 40000 KHz), (N/A mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533525] cfg80211: Updating information on =
frequency 2417 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533527] cfg80211: =
2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533528] cfg80211: =
Updating information on frequency 2422 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.533530] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, =
2000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533531] =
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533533] cfg80211: 2402000 KHz - 2482000 =
KHz @ 40000 KHz), (N/A mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533534] cfg80211: Updating information on =
frequency 2432 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533535] cfg80211: =
2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533537] cfg80211: =
Updating information on frequency 2437 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.533538] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, =
2000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533539] =
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533541] cfg80211: 2402000 KHz - 2482000 =
KHz @ 40000 KHz), (N/A mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533542] cfg80211: Updating information on =
frequency 2447 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533544] cfg80211: =
2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533545] cfg80211: =
Updating information on frequency 2452 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.533546] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, =
2000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533547] =
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533549] cfg80211: 2402000 KHz - 2482000 =
KHz @ 40000 KHz), (N/A mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533550] cfg80211: Updating information on =
frequency 2462 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533552] cfg80211: =
2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533553] cfg80211: =
Updating information on frequency 2467 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.533554] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, =
2000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533556] =
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533557] cfg80211: 2402000 KHz - 2482000 =
KHz @ 40000 KHz), (N/A mBi, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533558] cfg80211: Disabling freq 2484 =
MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533559] cfg80211: =
Updating information on frequency 5180 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.533561] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, =
2300 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533562] =
cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533564] cfg80211: 5170000 KHz - 5250000 =
KHz @ 40000 KHz), (300 mBi, 2300 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533565] cfg80211: Updating information on =
frequency 5220 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533566] cfg80211: =
5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533568] cfg80211: =
Updating information on frequency 5240 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.533569] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, =
2300 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533570] =
cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533572] cfg80211: 5250000 KHz - 5330000 =
KHz @ 40000 KHz), (300 mBi, 2300 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533573] cfg80211: Updating information on =
frequency 5280 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533575] cfg80211: =
5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533576] cfg80211: =
Updating information on frequency 5300 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.533577] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, =
2300 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533579] =
cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533580] cfg80211: 5250000 KHz - 5330000 =
KHz @ 40000 KHz), (300 mBi, 2300 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[ =A0=A0=A09.533581] cfg80211: Disabling freq 5500 =
MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533582] cfg80211: =
Disabling freq 5520 MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.533583] cfg80211: Disabling freq 5540 MHz<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533584] cfg80211: Disabling freq 5560 =
MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533585] cfg80211: =
Disabling freq 5580 MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.533585] cfg80211: Disabling freq 5600 MHz<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533586] cfg80211: Disabling freq 5620 =
MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533587] cfg80211: =
Disabling freq 5640 MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.533588] cfg80211: Disabling freq 5660 MHz<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533589] cfg80211: Disabling freq 5680 =
MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533590] cfg80211: =
Disabling freq 5700 MHz<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.533591] cfg80211: Updating information on frequency 5745 MHz for a 20 =
MHz width channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533592] cfg80211: 5735000 KHz - 5835000 =
KHz @ 40000 KHz), (300 mBi, 3000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533593] cfg80211: Updating information on =
frequency 5765 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533595] cfg80211: =
5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533596] cfg80211: =
Updating information on frequency 5785 MHz for a 20 MHz width channel =
with regulatory rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 =
9.533597] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, =
3000 mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533599] =
cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width =
channel with regulatory rule:<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533600] cfg80211: 5735000 KHz - 5835000 =
KHz @ 40000 KHz), (300 mBi, 3000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533601] cfg80211: Updating information on =
frequency 5825 MHz for a 20 MHz width channel with regulatory =
rule:<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533603] cfg80211: =
5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 =
mBm)<o:p></o:p></p><p class=3DMsoNormal>[=A0=A0=A0 9.533606] cfg80211: =
Regulatory domain changed to country: AU<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533607] cfg80211:=A0=A0 (start_freq - =
end_freq @ bandwidth), (max_antenna_gain, max_eirp)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533608] cfg80211:=A0=A0 (2402000 KHz - =
2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533609] cfg80211:=A0=A0 (5170000 KHz - =
5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533611] cfg80211:=A0=A0 (5250000 KHz - =
5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)<o:p></o:p></p><p =
class=3DMsoNormal>[=A0=A0=A0 9.533612] cfg80211:=A0=A0 (5735000 KHz - =
5835000 KHz @ 40000 KHz), (300 mBi, 3000 =
mBm)<o:p></o:p></p></div></body></html>
------=_NextPart_000_0CFF_01CD01BB.A7359070--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-02-27  5:00 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2012-02-27  5:00 UTC (permalink / raw)
  To: ath9k-devel

The lower you go on the level of abstraction, the more data any kind of
debugging approach generates, meaning way more effort to analyze the
data and make sense of it.
I don't typically start with the part that's hardest to analyze. High
level states are easier to look into and make sense of, so they're also
easier to rule out.
Code review is also a very good starting point. I actually found and
fixed more user visible bugs through code review than any other
debugging method.

>> > but hardware development information in the community is not
>> > really available.
>> 
>> I found that people that have shown enough interest in improving ath9k
>> and have proven to be experienced in working on such drivers tend to get
>> access to documentation.
> 
> Well, let's say that in my experience the threshold for "approval"
> was set too high. As I said, and as you may remember, I was
> repeatedly shot down or ignored, offering to try to get to the bottom
> of the issues. I understand now that it may not really be legally
> possible for Atheros to provide the information that is actually
> required to get to the bottom of the issues, but that makes working
> on the driver too inefficient.
Most issues can be fixed with a good understanding of the code alone,
detailed hardware knowledge is often not as important.
This isn't unique to ath9k. I've fixed bugs in other drivers as well
without having any form of hardware documentation, because I'm able to
read and understand code and my brain can handle a bit of complexity.

>> > Being told to try to reverse engineer the hardware using the
>> > driver source code or any other source code does not qualify.
>> 
>> Your definition of 'reverse engineering' is quite funny.
> 
> There's not just one type of reverse engineering.
> 
> Suggesting hardware reverse engineering in an open source driver
> development effort is, well, not what I expect.
> 
> 
>> To me it looks somewhat ridiculous that you claim to know better what's
>> required to debug this issue than people working with the hardware on a
>> daily basis (Adrian, Mohammed, me).
> 
> I've developed both hardware and software for more than 20 years, and
> neither problems nor solutions have changed much, so I think I still
> have a clue.
OK, so let me get this straight: You can't imagine how the test result
from disabling PS could be useful for tracking down the problem, so you
automatically assume that it *must* be a lame workaround suggestion?
That seems rather narrow-minded of you.

Of course I can see multiple ways in which this information would be
useful, but I guess that may not matter to you.

- Felix

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2012-01-15  8:24 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2012-01-15  8:24 UTC (permalink / raw)
  To: ath9k-devel

=A0=A0=A0 /* Only use status info from the last fragment */
=A0=A0=A0 if (rx_stats->rs_more)
=A0=A0=A0 =A0=A0=A0 return 0=3B

rs_more is set from the receive descriptor in ath9k_hw_rxprocdesc=2C so if =
"fragment" is an A-MPDU subframe=2C each subframe gets its own descriptor. =
This looks promising.
 		 	   		  =

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-12-30 17:16 Philip Anil-QBW348
  0 siblings, 0 replies; 335+ messages in thread
From: Philip Anil-QBW348 @ 2011-12-30 17:16 UTC (permalink / raw)
  To: kernelnewbies

I want the drivers to be owned by a user, Foo. Whenever the drivers are
called by application Duh, I want a program Bar to run after the driver
has done its work, since Foo is now running the driver. Is it possible?

Anil 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20111230/30642c9f/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-12-28 14:01 Shawn Guo
  0 siblings, 0 replies; 335+ messages in thread
From: Shawn Guo @ 2011-12-28 14:01 UTC (permalink / raw)
  To: linux-arm-kernel

[Resend to cc LAKML.  Sorry.]

Hi Arnd, Olof,

Please consider to pull mxs/clk-prepare for 3.3.  I have not collected
the ack tag from every single subsystem maintainer, but I do not want
to hold this any longer, since it's close to merge window now.

Hi Sascha,

I send a couple of Richard's patch you have collected here for
completeness.

Regards,
Shawn

The following changes since commit 384703b8e6cd4c8ef08512e596024e028c91c339:

  Linux 3.2-rc6 (2011-12-16 18:36:26 -0800)

are available in the git repository at:
  git://git.linaro.org/people/shawnguo/linux-2.6.git mxs/clk-prepare

Richard Zhao (2):
      clk: add helper functions clk_prepare_enable and clk_disable_unprepare
      net: fec: add clk_prepare/clk_unprepare

Shawn Guo (10):
      ARM: mxs: convert platform code to clk_prepare/clk_unprepare
      dma: mxs-dma: convert to clk_prepare/clk_unprepare
      mmc: mxs-mmc: convert to clk_prepare/clk_unprepare
      mtd: gpmi-lib: convert to clk_prepare/clk_unprepare
      net: flexcan: convert to clk_prepare/clk_unprepare
      serial: mxs-auart: convert to clk_prepare/clk_unprepare
      video: mxsfb: convert to clk_prepare/clk_unprepare
      ASoC: mxs-saif: convert to clk_prepare/clk_unprepare
      clk: add config option HAVE_CLK_PREPARE into Kconfig
      ARM: mxs: select HAVE_CLK_PREPARE for clock

 arch/arm/Kconfig                      |    1 +
 arch/arm/mach-mxs/clock-mx23.c        |   10 +++++-----
 arch/arm/mach-mxs/clock-mx28.c        |   10 +++++-----
 arch/arm/mach-mxs/clock.c             |   33 +++++++++++++++++++++++----------
 arch/arm/mach-mxs/mach-mx28evk.c      |    2 +-
 arch/arm/mach-mxs/system.c            |    2 +-
 arch/arm/mach-mxs/timer.c             |    2 +-
 drivers/clk/Kconfig                   |    3 +++
 drivers/dma/mxs-dma.c                 |    8 ++++----
 drivers/mmc/host/mxs-mmc.c            |   10 +++++-----
 drivers/mtd/nand/gpmi-nand/gpmi-lib.c |   12 ++++++------
 drivers/net/can/flexcan.c             |   10 +++++-----
 drivers/net/ethernet/freescale/fec.c  |   10 +++++-----
 drivers/tty/serial/mxs-auart.c        |    8 ++++----
 drivers/video/mxsfb.c                 |    8 ++++----
 include/linux/clk.h                   |   22 ++++++++++++++++++++++
 sound/soc/mxs/mxs-saif.c              |    4 ++--
 17 files changed, 97 insertions(+), 58 deletions(-)

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-12-16  2:18 Swapnil Gaikwad
  0 siblings, 0 replies; 335+ messages in thread
From: Swapnil Gaikwad @ 2011-12-16  2:18 UTC (permalink / raw)
  To: kernelnewbies

Hi ,
     Tell me procedure or system call for-
     How to copy metadata of all files in a ext4 filesystem.

-- 
    Regards,

Swapnil Gaikwad.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-12-02 16:01 Will Deacon
  0 siblings, 0 replies; 335+ messages in thread
From: Will Deacon @ 2011-12-02 16:01 UTC (permalink / raw)
  To: linux-arm-kernel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-11-28  2:35 Jett.Zhou
  0 siblings, 0 replies; 335+ messages in thread
From: Jett.Zhou @ 2011-11-28  2:35 UTC (permalink / raw)
  To: linux-arm-kernel


1 remove unnecesary spinlock when release
2 remove change id

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-11-21 15:22 Jimmy Pan
  0 siblings, 0 replies; 335+ messages in thread
From: Jimmy Pan @ 2011-11-21 15:22 UTC (permalink / raw)
  To: kernelnewbies

..Do you want to feel something new? Do you want to feel new
unforgettable sensations? This is for you!
http://un-ocean.fr/p.g.php?wellink_friend_id=14ox0

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-11-12 14:39 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2011-11-12 14:39 UTC (permalink / raw)
  To: ath9k-devel

and/or experimental. Am I right?
Either way I would be more than happy to help with debugging this and
maybe get this chipset working
sometime soon! The only problem us that my expertise only stretches so
far. Even though I know C
I've never done any kernel or driver work.
So what can I do? I'll see if I can get my hands on one (or two) of
those usb-to-serial adapters and see what happens, but I live on a
very tight budget so I can't hope for too much.

// Kim

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-11-12 14:39 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2011-11-12 14:39 UTC (permalink / raw)
  To: ath9k-devel

masked out and then unmasked. So I bet ath_rx_tasklet() is actually
running somehow and not doing anything useful.

Kim - can you please add a debug statement inside ath_rx_tasklet() -
at the beginning, then at the end of the function where it's
re-enabling RXEOL. Just to confirm that it _is_ running and causing
the RXEOL bit to be re-enabled.

Thanks,


Adrian

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-09-23  3:42 毕春雷
  0 siblings, 0 replies; 335+ messages in thread
From: 毕春雷 @ 2011-09-23  3:42 UTC (permalink / raw)
  To: kernelnewbies


nirvanacn2011 at hotmail.com 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20110923/b0ee862a/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-09-19  1:45 Saleem Abdulrasool
  0 siblings, 0 replies; 335+ messages in thread
From: Saleem Abdulrasool @ 2011-09-19  1:45 UTC (permalink / raw)
  To: linux-arm-kernel


Hi.

The attached patch adds polled io methods for the mxcuart.  I needed them in
order to use kgdb during the early boot.  The changes have been sitting in (my
and) Genesi's tree for quite some time now.  I believe that the changes are
generally useful and would like you to consider merging them in the "upstream"
repository.

Thanks.

-- 
Saleem Abdulrasool
compnerd (at) compnerd (dot) org

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-09-15  2:03 Jongpill Lee
  0 siblings, 0 replies; 335+ messages in thread
From: Jongpill Lee @ 2011-09-15  2:03 UTC (permalink / raw)
  To: linux-arm-kernel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-08-05  3:08 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2011-08-05  3:08 UTC (permalink / raw)
  To: ath9k-devel

explained in the wireshark documentation.

Cheers,
Julien

-- 
  .''`.   Julien Valroff ~ <julien@kirya.net> ~ <julien@debian.org>    
 : :'  :  Debian Developer & Free software contributor
 `. `'`   http://www.kirya.net/
   `-     4096R/ E1D8 5796 8214 4687 E416  948C 859F EF67 258E 26B1

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-08-05  3:08 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2011-08-05  3:08 UTC (permalink / raw)
  To: ath9k-devel

so the user should only be allowed to change the value to anything else than
what is stored in the eeprom if we know it's a valid setting.

As far as I understand the EEPROM only stores a single value for the
antenna-switch setting, i.e. if there multiple valid values these must come from
somewhere else.

I don't know the exact electronic details of the implementation, so I'd go with
a list of known-to-be-good values (passed to the driver via platform-data)
instead of a causal check (e.g. don't allow to set the TX and RX to the same
antenna or whatever you imagine to possibly be an invalid setting).


Cheers

Daniel

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-08-05  3:08 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2011-08-05  3:08 UTC (permalink / raw)
  To: ath9k-devel

users on debugging issues like this, even if end users happen to be
competent. The prefered modus operandi is to attempt to reproduce
issues internally, and if that is successful then some time later
there usually comes a patch into wireless-testing.git. This is of
course useless for corner case problems.

This mailing list is a lot like first-line support. You usually don't
get quality engineer time from Atheros here. I can understand that,
because remote debugging is a tremendous pain. But it's also the only
way to resolve odd problems.

I would recommend that you try to reproduce using FreeBSD. I'm unsure
if the driver there supports AR9287, but if it does I think you will
be able to get good help thanks to Adrian, the main fbsd driver
developer, who is also active on this list, but he's obviously not
working on the Linux driver. :)


//Peter

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-08-05  3:08 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2011-08-05  3:08 UTC (permalink / raw)
  To: ath9k-devel

1. ASPM is disabled on my machine wherever possible (in fact I think
my mainboard doesn't even support it and this is detected correctly,
at least there I couldn't find any related setting in bios)
2. My wireless card is PCI not PCIe, and if I don't confuse something
here, ASPM is a feature of PCIe and PCIe only.

Power-saving I might check by disabling all the related options, I'll
let you know if it changes anything.

Thanks,
Philipp

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-08-05  3:08 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2011-08-05  3:08 UTC (permalink / raw)
  To: ath9k-devel

that'd occur with the NIC awake or having something being written to
it) the NIC shouldn't be generating interrupts if:

* sync/async cause are 0;
* ier is 0;
* imr is 0.

Now maybe some part of ath9k is still trying to write to the NIC when
it's asleep, but it would set some bits in sync_cause/async_cause.

At this point I'd really suggest whacking other devices into the slot
to see if they generate the same kind of behaviour.



Adrian

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-07-21 11:12 Padmavathi Venna
  0 siblings, 0 replies; 335+ messages in thread
From: Padmavathi Venna @ 2011-07-21 11:12 UTC (permalink / raw)
  To: linux-arm-kernel

Add external interrupt support for S5P64X0.The external interrupt
group 0(0 to 15) is used for wake-up source in stop and sleep mode.
Add generic irq chip support

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
---

Please ignore my previous patch due to wrong return value.

 arch/arm/mach-s5p64x0/Makefile                 |    2 +-
 arch/arm/mach-s5p64x0/include/mach/regs-gpio.h |   10 ++
 arch/arm/mach-s5p64x0/irq-eint.c               |  152 ++++++++++++++++++++++++
 3 files changed, 163 insertions(+), 1 deletions(-)
 create mode 100644 arch/arm/mach-s5p64x0/irq-eint.c

diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
index ae6bf6f..5f6afdf 100644
--- a/arch/arm/mach-s5p64x0/Makefile
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -13,7 +13,7 @@ obj-				:=
 # Core support for S5P64X0 system
 
 obj-$(CONFIG_ARCH_S5P64X0)	+= cpu.o init.o clock.o dma.o gpiolib.o
-obj-$(CONFIG_ARCH_S5P64X0)	+= setup-i2c0.o
+obj-$(CONFIG_ARCH_S5P64X0)	+= setup-i2c0.o irq-eint.o
 obj-$(CONFIG_CPU_S5P6440)	+= clock-s5p6440.o
 obj-$(CONFIG_CPU_S5P6450)	+= clock-s5p6450.o
 
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
index 0953ef6..6ce2547 100644
--- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
@@ -34,4 +34,14 @@
 #define S5P6450_GPQ_BASE		(S5P_VA_GPIO + 0x0180)
 #define S5P6450_GPS_BASE		(S5P_VA_GPIO + 0x0300)
 
+/* External interrupt control registers for group0 */
+
+#define EINT0CON0_OFFSET		(0x900)
+#define EINT0MASK_OFFSET		(0x920)
+#define EINT0PEND_OFFSET		(0x924)
+
+#define S5P64X0_EINT0CON0		(S5P_VA_GPIO + EINT0CON0_OFFSET)
+#define S5P64X0_EINT0MASK		(S5P_VA_GPIO + EINT0MASK_OFFSET)
+#define S5P64X0_EINT0PEND		(S5P_VA_GPIO + EINT0PEND_OFFSET)
+
 #endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c
new file mode 100644
index 0000000..69ed454
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/irq-eint.c
@@ -0,0 +1,152 @@
+/* arch/arm/mach-s5p64x0/irq-eint.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *		http://www.samsung.com/
+ *
+ * Based on linux/arch/arm/mach-s3c64xx/irq-eint.c
+ *
+ * S5P64X0 - Interrupt handling for External Interrupts.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <plat/regs-irqtype.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+
+#define eint_offset(irq)	((irq) - IRQ_EINT(0))
+
+static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+	int offs = eint_offset(data->irq);
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+
+	if (offs > 15)
+		return -EINVAL;
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No edge setting!\n");
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S3C2410_EXTINT_RISEEDGE;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S3C2410_EXTINT_FALLEDGE;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S3C2410_EXTINT_BOTHEDGE;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S3C2410_EXTINT_LOWLEV;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S3C2410_EXTINT_HILEV;
+		break;
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	shift = (offs / 2) * 4;
+	mask = 0x7 << shift;
+
+	ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, S5P64X0_EINT0CON0);
+
+	/* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
+	if (0x50000 == (__raw_readl(S5P64X0_SYS_ID) & 0xFF000))
+		s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
+	else
+		s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
+
+	return 0;
+}
+
+/*
+ * s5p64x0_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into
+ * the specific handlers s5p64x0_irq_demux_eintX_Y.
+ */
+static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end)
+{
+	u32 status = __raw_readl(S5P64X0_EINT0PEND);
+	u32 mask = __raw_readl(S5P64X0_EINT0MASK);
+	unsigned int irq;
+
+	status &= ~mask;
+	status >>= start;
+	status &= (1 << (end - start + 1)) - 1;
+
+	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+		if (status & 1)
+			generic_handle_irq(irq);
+		status >>= 1;
+	}
+}
+
+static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+	s5p64x0_irq_demux_eint(0, 3);
+}
+
+static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
+{
+	s5p64x0_irq_demux_eint(4, 11);
+}
+
+static void s5p64x0_irq_demux_eint12_15(unsigned int irq,
+					struct irq_desc *desc)
+{
+	s5p64x0_irq_demux_eint(12, 15);
+}
+
+static int s5p64x0_alloc_gc(void)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+
+	gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE,
+				    S5P_VA_GPIO, handle_level_irq);
+	if (!gc) {
+		printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0"
+			"external interrupts failed\n", __func__);
+		return -EINVAL;
+	}
+
+	ct = gc->chip_types;
+	ct->chip.irq_ack = irq_gc_ack;
+	ct->chip.irq_mask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+	ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
+	ct->regs.ack = EINT0PEND_OFFSET;
+	ct->regs.mask = EINT0MASK_OFFSET;
+	irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+	return 0;
+}
+
+static int __init s5p64x0_init_irq_eint(void)
+{
+	int ret = s5p64x0_alloc_gc();
+	irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3);
+	irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11);
+	irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15);
+
+	return ret;
+}
+arch_initcall(s5p64x0_init_irq_eint);
-- 
1.7.0.4

^ permalink raw reply related	[flat|nested] 335+ messages in thread
* No subject
@ 2011-06-27 20:47 Jongpill Lee
  0 siblings, 0 replies; 335+ messages in thread
From: Jongpill Lee @ 2011-06-27 20:47 UTC (permalink / raw)
  To: linux-arm-kernel



>From bogus@does.not.exist.com  Mon Jun 27 16:47:34 2011
From: bogus@does.not.exist.com ()
Date: Mon, 27 Jun 2011 20:47:34 -0000
Subject: No subject
Message-ID: <mailman.139.1316181028.20020.linux-arm-kernel@lists.infradead.org>

- General tidy-up after Thomas' review. I've kept the config option
  for the time being until we can sort out the anonymous union
  problem.

Marc Zyngier (3):
  genirq: add support for per-cpu dev_id interrupts
  ARM: gic: consolidate PPI handling
  ARM: gic, local timers: use the request_percpu_irq() interface

 arch/arm/common/Kconfig                           |    1 +
 arch/arm/common/gic.c                             |   38 +++-
 arch/arm/include/asm/entry-macro-multi.S          |    7 -
 arch/arm/include/asm/hardirq.h                    |    3 -
 arch/arm/include/asm/hardware/entry-macro-gic.S   |   19 +--
 arch/arm/include/asm/hardware/gic.h               |    1 -
 arch/arm/include/asm/localtimer.h                 |   19 +-
 arch/arm/include/asm/smp.h                        |    5 -
 arch/arm/include/asm/smp_twd.h                    |    2 +-
 arch/arm/kernel/irq.c                             |    3 -
 arch/arm/kernel/smp.c                             |   33 +---
 arch/arm/kernel/smp_twd.c                         |   47 +++++-
 arch/arm/mach-exynos4/include/mach/entry-macro.S  |    6 +-
 arch/arm/mach-exynos4/mct.c                       |    5 -
 arch/arm/mach-msm/board-msm8x60.c                 |   11 -
 arch/arm/mach-msm/include/mach/entry-macro-qgic.S |   73 +-------
 arch/arm/mach-msm/timer.c                         |   69 ++++---
 arch/arm/mach-omap2/include/mach/entry-macro.S    |   14 +--
 arch/arm/mach-shmobile/entry-intc.S               |    3 -
 arch/arm/mach-shmobile/include/mach/entry-macro.S |    3 -
 include/linux/interrupt.h                         |   40 +++-
 include/linux/irq.h                               |   16 ++-
 include/linux/irqdesc.h                           |    1 +
 kernel/irq/Kconfig                                |    4 +
 kernel/irq/chip.c                                 |   54 ++++++
 kernel/irq/internals.h                            |    2 +
 kernel/irq/irqdesc.c                              |   25 +++
 kernel/irq/manage.c                               |  209 +++++++++++++++++=
+++-
 kernel/irq/settings.h                             |    7 +
 29 files changed, 471 insertions(+), 249 deletions(-)

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-06-27 20:47 John Ogness
  0 siblings, 0 replies; 335+ messages in thread
From: John Ogness @ 2011-06-27 20:47 UTC (permalink / raw)
  To: linux-arm-kernel

The alignment exception handler is setup fairly late in
the boot process (fs_initcall). However, with newer gcc
versions and the compiler option -fconserve-stack, code
accessing unaligned data is generated in functions that
are called earlier, for example pcpu_dump_alloc_info().
This results in unhandled alignment exceptions during
boot. By setting up the exception handler sooner, we
reduce the window where a compiler may generate code
accessing unaligned data.

Here is a minimal example that shows the issue seen with
pcpu_dump_alloc_info():

=========== begin align_test.c ==========
extern void exfunc(char *str);
void somefunc(void)
{
        char mystr[] = "--------";  /* 9 bytes */
        exfunc(mystr);
}
============ end align_test.c ===========

Using the cross toolchain:
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2011.03-41) 4.5.2

$ arm-none-linux-gnueabi-gcc \
     -march=armv6 \
     -mtune=arm1136j-s \
     -marm \
     -Os \
     -fconserve-stack \
     -c align_test.c

The object dump of align_test.o shows:

00000000 <somefunc>:
   0:   e92d401f        push    {r0, r1, r2, r3, r4, lr}
   4:   e28d0007        add     r0, sp, #7
   8:   e59f3020        ldr     r3, [pc, #32]   ; 30 <somefunc+0x30>
   c:   e5932000        ldr     r2, [r3]
  10:   e58d2007        str     r2, [sp, #7]
  ...
  ...

At address 0x10 there is unaligned access.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
---
Patch against linux-next-20110831.
 arch/arm/include/asm/setup.h |    1 +
 arch/arm/kernel/setup.c      |    2 ++
 arch/arm/mm/alignment.c      |   10 +++++++---
 3 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index a3ca303..b3e18f8 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -232,6 +232,7 @@ extern struct meminfo meminfo;
 extern int arm_add_memory(phys_addr_t start, unsigned long size);
 extern void early_print(const char *str, ...);
 extern void dump_machine_table(void);
+extern int __init alignment_init(void);
 
 #endif  /*  __KERNEL__  */
 
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 0ca06f7..0f1b2b5 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -950,6 +950,8 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	early_trap_init();
 
+	alignment_init();
+
 	if (mdesc->init_early)
 		mdesc->init_early();
 }
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 715eb1d..5f013cb 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -950,7 +950,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
  * it isn't a sysctl, and it doesn't contain sysctl information.
  * We now locate it in /proc/cpu/alignment instead.
  */
-static int __init alignment_init(void)
+static int __init alignment_sysfs_init(void)
 {
 #ifdef CONFIG_PROC_FS
 	struct proc_dir_entry *res;
@@ -960,7 +960,13 @@ static int __init alignment_init(void)
 	if (!res)
 		return -ENOMEM;
 #endif
+	return 0;
+}
+
+fs_initcall(alignment_sysfs_init);
 
+int __init alignment_init(void)
+{
 	if (cpu_is_v6_unaligned()) {
 		cr_alignment &= ~CR_A;
 		cr_no_alignment &= ~CR_A;
@@ -985,5 +991,3 @@ static int __init alignment_init(void)
 
 	return 0;
 }
-
-fs_initcall(alignment_init);
-- 
1.7.2.5

^ permalink raw reply related	[flat|nested] 335+ messages in thread
* No subject
@ 2011-06-16 11:41 Venkateswarlu P
  0 siblings, 0 replies; 335+ messages in thread
From: Venkateswarlu P @ 2011-06-16 11:41 UTC (permalink / raw)
  To: kernelnewbies

how to understand the kernerl source  files in a simple way


what header  files i have to understand first


for example  to understand      do_fork()     function  for process
creation  which is defined in  kernel/fork.c



-- 
**
P VENKATESWARLU
M.Tech (CSE) II year
NIT Calicut ,Kerala* **
*+91-9995115752
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20110616/e52d0718/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-06-14 12:20 Venkateswarlu P
  0 siblings, 0 replies; 335+ messages in thread
From: Venkateswarlu P @ 2011-06-14 12:20 UTC (permalink / raw)
  To: kernelnewbies

anyone can send
implementation of  *fork()* library call  in the library

i want to know how it is get connected to the system call.















**
P VENKATESWARLU
M.Tech (CSE) II year
NIT Calicut ,Kerala* **
*+91-9995115752
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20110614/e1414a9f/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-06-13 17:29 Andre Silva
  0 siblings, 0 replies; 335+ messages in thread
From: Andre Silva @ 2011-06-13 17:29 UTC (permalink / raw)
  To: linux-arm-kernel

Subject: [PATCH 1/2] ARM:mach-mx5/mx53_ard: Add ESDHC support

Signed-off-by: Andre Silva <andre.silva@freescale.com>

---
 arch/arm/mach-mx5/Kconfig          |    1 +
 arch/arm/mach-mx5/board-mx53_ard.c |   22 ++++++++++++++++++++++
 2 files changed, 23 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 695cdf0..9a8e6f8 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -213,6 +213,7 @@ config MACH_MX53_ARD
 	bool "Support MX53 ARD platforms"
 	select SOC_IMX53
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	help
 	  Include support for MX53 ARD platform. This includes specific
 	  configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
index 7e1859b..6049fda 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-mx5/board-mx53_ard.c
@@ -36,6 +36,8 @@
 #include "devices-imx53.h"
 
 #define ARD_ETHERNET_INT_B	IMX_GPIO_NR(2, 31)
+#define ARD_SD1_CD		IMX_GPIO_NR(1, 1)
+#define ARD_SD1_WP		IMX_GPIO_NR(1, 9)
 
 static iomux_v3_cfg_t mx53_ard_pads[] = {
 	/* UART1 */
@@ -69,6 +71,19 @@ static iomux_v3_cfg_t mx53_ard_pads[] = {
 	MX53_PAD_EIM_OE__EMI_WEIM_OE,
 	MX53_PAD_EIM_RW__EMI_WEIM_RW,
 	MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
+	/* SDHC1 */
+	MX53_PAD_SD1_CMD__ESDHC1_CMD,
+	MX53_PAD_SD1_CLK__ESDHC1_CLK,
+	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
+	MX53_PAD_PATA_DATA8__ESDHC1_DAT4,
+	MX53_PAD_PATA_DATA9__ESDHC1_DAT5,
+	MX53_PAD_PATA_DATA10__ESDHC1_DAT6,
+	MX53_PAD_PATA_DATA11__ESDHC1_DAT7,
+	MX53_PAD_GPIO_1__GPIO1_1,
+	MX53_PAD_GPIO_9__GPIO1_9,
 };
 
 static struct resource ard_smsc911x_resources[] = {
@@ -100,6 +115,11 @@ static struct platform_device ard_smsc_lan9220_device = {
 	},
 };
 
+static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = {
+	.cd_gpio = ARD_SD1_CD,
+	.wp_gpio = ARD_SD1_WP,
+};
+
 static void __init mx53_ard_io_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
@@ -156,6 +176,8 @@ static void __init mx53_ard_board_init(void)
 	mx53_ard_io_init();
 	weim_cs_config();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
 }
 
 static void __init mx53_ard_timer_init(void)
-- 
1.7.1

^ permalink raw reply related	[flat|nested] 335+ messages in thread
* No subject
@ 2011-06-05 18:33 Hector Oron
  0 siblings, 0 replies; 335+ messages in thread
From: Hector Oron @ 2011-06-05 18:33 UTC (permalink / raw)
  To: linux-arm-kernel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-06-04 23:16 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2011-06-04 23:16 UTC (permalink / raw)
  To: ath9k-devel

not even used an AR9300 yet, let alone tinkered with the TPC stuff) it
looks all very straightforward. Unless some other chip functionality
is required that hasn't been ported to ath9k, it "should just work".

Sorry, I can't be more helpful than that.

(Also, it'd be nice if someone contributed per-packet TPC support -
proper support at that! - to ath9k. :)


adrian

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-06-04 23:16 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2011-06-04 23:16 UTC (permalink / raw)
  To: ath9k-devel

"Evidently, some BIOSes have their ASPM support misconfigured and thus
problems can arise if the PCI-E link power mode is dropped on an
unsupported device. There are a few mentions of hangs and other issues
under Linux associated with this power management feature. It's not
really a surprise though that the BIOSes would be misconfigured given
all of the other BIOS-related problems under Linux and the once very
poor suspend-and-resume support due to all of the workarounds and
hacks that BIOS/hardware vendors have done to cater towards Microsoft
Windows power management. In this case, it seems a large number of
mobile systems are supporting ASPM but not properly advertising the
support via the standard BIOS ACPI FADT (Fixed ACPI Description
Table). Some Linux drivers even forcibly disable ASPM on Linux (e.g.
this kernel patch)."

Would someone please take charge of testing an unmodified ath9k (ie,
without my APSM disable fix) and try reverting this kernel patch?

Thanks,


Adrian

On 25 February 2011 04:02, Jonathan Nieder <jrnieder@gmail.com> wrote:
> (just cc-ing some people listed in MAINTAINERS)
> Hi,
>
> Tony Houghton wrote:
>
>> With 2.6.37 I can not use suspend on my Compaq/HP 311c (Intel Atom
>> N270/NVidia Ion LE). Originally the machine just kept locking up without
>> even blanking the display when I tried to suspend (using the GNOME menu
>> or by shutting the lid). I upgraded upower and gnome-power-manager etc
>> to experimental and after that the machine suspended OK but could not
>> resume. The backlight came on but the screen stayed blank and I could
>> not get to a console or anything with Alt+Fn.
> [...]
>> I tried replacing network-manager with wicd but that crashed the system
>> when it connected instead of when disconnected.
> [...]
>> While testing different kernels I found it would crash at different
>> times, usually before the screen turned off for suspending, but
>> sometimes it would crash on resuming and occasionally it locked up while
>> booting, but it's always a complete lock-up ie the keyboard is
>> completely responsive, including caps lock, the mouse won't move if the
>> display is still on, and the only way out is to hold down the power
>> button.
> [...]
>> I haven't tried looking in logs because the crashes are so severe I
>> don't think they'd be able to record anything useful. But using git
>> bisect I think I have tracked down the change that started causing this
>> problem:
>>
>> 53bc7aa08b48e5cd745f986731cc7dc24eef2a9f is the first bad commit
>> commit 53bc7aa08b48e5cd745f986731cc7dc24eef2a9f
>> Author: Vivek Natarajan <vnatarajan@atheros.com>
>> Date: =A0 Mon Apr 5 14:48:04 2010 +0530
>>
>> =A0 =A0 ath9k: Add support for newer AR9285 chipsets.
>>
>> =A0 =A0 This patch adds support for a modified newer version of AR9285
>> =A0 =A0 chipsets.
>>
>> =A0 =A0 Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
>> =A0 =A0 Signed-off-by: John W. Linville <linville@tuxdriver.com>
>
> The adaptor is an AR9285[1].
>
> That commit is based against v2.6.33 and was merged in v2.6.35-rc1
>
> $ git describe 53bc7aa08b48e5cd745f986731cc7dc24eef2a9f
> v2.6.33-3523-g53bc7aa
> $ git name-rev --tags 53bc7aa08b48e5cd745f986731cc7dc24eef2a9f
> 53bc7aa08b48e5cd745f986731cc7dc24eef2a9f tags/v2.6.35-rc1~473^2~167^2~346
>
> Any ideas for tracking this down?
>
> Thanks,
> Jonathan
>
> [1]
>> 84: udi =3D '/org/freedesktop/Hal/devices/pci_168c_2b'
>> =A0 pci.device_protocol =3D 0 =A0(0x0) =A0(int)
>> =A0 pci.vendor =3D 'Atheros Communications Inc.' =A0(string)
>> =A0 info.vendor =3D 'Atheros Communications Inc.' =A0(string)
>> =A0 pci.product =3D 'AR9285 Wireless Network Adapter
>> (PCI-Express)' =A0(string) linux.sysfs_path =3D
>> '/sys/devices/pci0000:00/0000:00:15.0/0000:03:00.0' =A0(strin g)
>> =A0 info.parent =3D '/org/freedesktop/Hal/devices/pci_10de_ac6' =A0(stri=
ng)
>> =A0 info.linux.driver =3D 'ath9k' =A0(string)
>> =A0 pci.subsys_vendor =3D 'Hewlett-Packard Company' =A0(string)
>> =A0 linux.hotplug_type =3D 2 =A0(0x2) =A0(int)
>> =A0 linux.subsystem =3D 'pci' =A0(string)
>> =A0 info.subsystem =3D 'pci' =A0(string)
>> =A0 info.product =3D 'AR9285 Wireless Network Adapter
>> (PCI-Express)' =A0(string) info.udi =3D
>> '/org/freedesktop/Hal/devices/pci_168c_2b' =A0(string)
>> pci.linux.sysfs_path =3D
>> '/sys/devices/pci0000:00/0000:00:15.0/0000:03:00.0' =A0(string)
>> pci.product_id =3D 43 =A0(0x2b) =A0(int) pci.vendor_id =3D 5772 =A0(0x16=
8c)
>> (int) pci.subsys_product_id =3D 12352 =A0(0x3040) =A0(int)
>> pci.subsys_vendor_id =3D 4156 =A0(0x103c) =A0(int) pci.device_class =3D =
2
>> (0x2) =A0(int) pci.device_subclass =3D 128 =A0(0x80) =A0(int)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless"=
 in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at =A0http://vger.kernel.org/majordomo-info.html
>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-05-17  9:28 Javier Martin
  0 siblings, 0 replies; 335+ messages in thread
From: Javier Martin @ 2011-05-17  9:28 UTC (permalink / raw)
  To: linux-arm-kernel


This series of patches provides support for Aptina mt9p031 sensor on Beagleboard xM.
It has been tested using media-ctl and yavta.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-05-13 19:35 Vadim Bendebury
  0 siblings, 0 replies; 335+ messages in thread
From: Vadim Bendebury @ 2011-05-13 19:35 UTC (permalink / raw)
  To: linux-arm-kernel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-04-07  5:55 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2011-04-07  5:55 UTC (permalink / raw)
  To: ath9k-devel

the silicon itself at power-on. 'abcd' sounds a bit too convenient to be
what's in EEPROM/OTP; so maybe it's a default value in the silicon?

(All just conjecture here at this point.)


Adrian

On 10 April 2011 23:17, Mohammed Shafi <shafi.ath9k@gmail.com> wrote:

> On Sun, Apr 10, 2011 at 8:41 PM, Peter Stuge <peter@stuge.se> wrote:
> > Mohammed Shafi wrote:
> >> > Is this a serious proposal from Atheros, or just your attempt at
> >> > a quick fix?
> >>
> >> No! its purely a personal idea (am completely responsible for the
> >> mistake),and I will take a look at it carefully to fix this.
> >
> > Sorry, I didn't mean that you made a mistake, just that the
> > suggestion probably would not get us closer to the actual issue.
> >
> > Bus level issues are indeed difficult. :\
>
> thanks, i did not know that. thought simple as adding another device id.
> >
> >
> >> > A device having an unexpected PCI id means that something is really
> >> > wrong in the device or on the bus, and the solution is rarely to
> >> > pretend that it didn't happen.]
> >>
> >> Yeah I can see that, hoping that I may get a correct Device ID from
> >> the reporter. I dont think 'abcd' is a proper vendor id.
> >
> > Yes, it's easy to spot. The question is how we can find out *why*
> > this happened, so that this error case can be prevented.
>
> Yes sure.
> >
> >
> >> > Since this card should work fine in principle, maybe it's some issue
> >> > with missing, or wrong, firmware stored on the Linux system.
> >>
> >> AR9382 does not seems to have firmware
> >
> > Aha! That's only for the USB devices maybe. I don't know much detail
> > for these latest devices.
> >
> currently only  ath9k_htc needs firmware.
>
> >
> >> and you have any idea what might went wrong.
> >
> > Sorry, I don't understand what you mean here.
>
> Your suggestions about what might have went wrong, as you had already
> told it might be a bus level issue.
>
> >
> >
> >> Also why its detected as Ethernet Controller rather than
> >> Network controller.
> >
> > This string comes from the pciutils package and could easily have
> > changed. Better look at the numerical device class code, which is
> > what is read from hardware.
>
> thanks, I will look into that.
>
> >
> > But I expect that when one thing in config space (device id) is bogus
> > then the rest of config space is also quite possibly bogus, for the
> > same reason, whatever it is.
> >
> >
> > //Peter
> > _______________________________________________
> > ath9k-devel mailing list
> > ath9k-devel at lists.ath9k.org
> > https://lists.ath9k.org/mailman/listinfo/ath9k-devel
> >
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>

--20cf300256ecb39f7b04a09232d4
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Incorrect or misplaced EEPROM/OTP data, perhaps?<div><br></div><div>From wh=
at I gather, the PCI ID on earlier devices is loaded out of EEPROM by the s=
ilicon itself at power-on. &#39;abcd&#39; sounds a bit too convenient to be=
 what&#39;s in EEPROM/OTP; so maybe it&#39;s a default value in the silicon=
?</div>
<div><br></div><div>(All just conjecture here at this point.)</div><div><br=
></div><div><br></div><div>Adrian</div><div><br><div class=3D"gmail_quote">=
On 10 April 2011 23:17, Mohammed Shafi <span dir=3D"ltr">&lt;<a href=3D"mai=
lto:shafi.ath9k@gmail.com">shafi.ath9k at gmail.com</a>&gt;</span> wrote:<br>
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1p=
x #ccc solid;padding-left:1ex;"><div class=3D"im">On Sun, Apr 10, 2011 at 8=
:41 PM, Peter Stuge &lt;<a href=3D"mailto:peter@stuge.se">peter at stuge.se</a=
>&gt; wrote:<br>

&gt; Mohammed Shafi wrote:<br>
&gt;&gt; &gt; Is this a serious proposal from Atheros, or just your attempt=
 at<br>
&gt;&gt; &gt; a quick fix?<br>
&gt;&gt;<br>
&gt;&gt; No! its purely a personal idea (am completely responsible for the<=
br>
&gt;&gt; mistake),and I will take a look at it carefully to fix this.<br>
&gt;<br>
&gt; Sorry, I didn&#39;t mean that you made a mistake, just that the<br>
&gt; suggestion probably would not get us closer to the actual issue.<br>
&gt;<br>
&gt; Bus level issues are indeed difficult. :\<br>
<br>
</div>thanks, i did not know that. thought simple as adding another device =
id.<br>
<div class=3D"im">&gt;<br>
&gt;<br>
&gt;&gt; &gt; A device having an unexpected PCI id means that something is =
really<br>
&gt;&gt; &gt; wrong in the device or on the bus, and the solution is rarely=
 to<br>
&gt;&gt; &gt; pretend that it didn&#39;t happen.]<br>
&gt;&gt;<br>
&gt;&gt; Yeah I can see that, hoping that I may get a correct Device ID fro=
m<br>
&gt;&gt; the reporter. I dont think &#39;abcd&#39; is a proper vendor id.<b=
r>
&gt;<br>
&gt; Yes, it&#39;s easy to spot. The question is how we can find out *why*<=
br>
&gt; this happened, so that this error case can be prevented.<br>
<br>
</div>Yes sure.<br>
<div class=3D"im">&gt;<br>
&gt;<br>
&gt;&gt; &gt; Since this card should work fine in principle, maybe it&#39;s=
 some issue<br>
&gt;&gt; &gt; with missing, or wrong, firmware stored on the Linux system.<=
br>
&gt;&gt;<br>
&gt;&gt; AR9382 does not seems to have firmware<br>
&gt;<br>
&gt; Aha! That&#39;s only for the USB devices maybe. I don&#39;t know much =
detail<br>
&gt; for these latest devices.<br>
&gt;<br>
</div>currently only =A0ath9k_htc needs firmware.<br>
<div class=3D"im"><br>
&gt;<br>
&gt;&gt; and you have any idea what might went wrong.<br>
&gt;<br>
&gt; Sorry, I don&#39;t understand what you mean here.<br>
<br>
</div>Your suggestions about what might have went wrong, as you had already=
<br>
told it might be a bus level issue.<br>
<div class=3D"im"><br>
&gt;<br>
&gt;<br>
&gt;&gt; Also why its detected as Ethernet Controller rather than<br>
&gt;&gt; Network controller.<br>
&gt;<br>
&gt; This string comes from the pciutils package and could easily have<br>
&gt; changed. Better look at the numerical device class code, which is<br>
&gt; what is read from hardware.<br>
<br>
</div>thanks, I will look into that.<br>
<div><div></div><div class=3D"h5"><br>
&gt;<br>
&gt; But I expect that when one thing in config space (device id) is bogus<=
br>
&gt; then the rest of config space is also quite possibly bogus, for the<br=
>
&gt; same reason, whatever it is.<br>
&gt;<br>
&gt;<br>
&gt; //Peter<br>
&gt; _______________________________________________<br>
&gt; ath9k-devel mailing list<br>
&gt; <a href=3D"mailto:ath9k-devel@lists.ath9k.org">ath9k-devel at lists.ath9k=
.org</a><br>
&gt; <a href=3D"https://lists.ath9k.org/mailman/listinfo/ath9k-devel" targe=
t=3D"_blank">https://lists.ath9k.org/mailman/listinfo/ath9k-devel</a><br>
&gt;<br>
_______________________________________________<br>
ath9k-devel mailing list<br>
<a href=3D"mailto:ath9k-devel@lists.ath9k.org">ath9k-devel at lists.ath9k.org<=
/a><br>
<a href=3D"https://lists.ath9k.org/mailman/listinfo/ath9k-devel" target=3D"=
_blank">https://lists.ath9k.org/mailman/listinfo/ath9k-devel</a><br>
</div></div></blockquote></div><br></div>

--20cf300256ecb39f7b04a09232d4--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-04-07  5:55 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2011-04-07  5:55 UTC (permalink / raw)
  To: ath9k-devel

-------------------------------
Device Instance Id:
PCI\VEN_168C&DEV_0030&SUBSYS_3116168C&REV_01\4&492937F&0&00E2

Hardware Ids:
PCI\VEN_168C&DEV_0030&SUBSYS_3116168C&REV_01
PCI\VEN_168C&DEV_0030&SUBSYS_3116168C
PCI\VEN_168C&DEV_0030&CC_028000
PCI\VEN_168C&DEV_0030&CC_0280

Compatible Ids:
PCI\VEN_168C&DEV_0030&REV_01
PCI\VEN_168C&DEV_0030
PCI\VEN_168C&CC_028000
PCI\VEN_168C&CC_0280
PCI\VEN_168C
PCI\CC_028000
PCI\CC_0280

Matching Device Id:
pci\ven_168c&dev_0030&subsys_3116168c


Here is the interesting bit, when I first hooked this card I booted my=
 machine in Ubuntu I saw the same 168c:ABCD. After using it under Window=
s, I booted in to Linux today and found that it is reporting the expecte=
d IDs. Now ath9k works right out of the box, no Vendor ID hacking requir=
ed. I am using it as station right now. The other card is in a different=
 machine. I will try to swap the cards to verify my theory. I am thinkin=
g the Windows driver applied a firmware update to the card. Or, the othe=
r card skipped quality checks and has bogus EEPROM data. Any thoughts?

0e:00.0 Network controller [0280]: Atheros Communications Inc. AR9300=
 Wireless LAN adaptor [168c:0030] (rev 01)

lspci -vvvnn returns

0e:00.0 Network controller [0280]: Atheros Communications Inc. AR9300=
 Wireless LAN adaptor [168c:0030] (rev 01)
	Subsystem: Atheros Communications Inc. Device [168c:3116]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Ste=
pping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- <TAbor=
t- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=3D128K]
	[virtual] Expansion ROM@f2000000 [disabled] [size=3D64K]
	Capabilities: <access denied>
	Kernel driver in use: ath9k
	Kernel modules: ath9k


Hasan R.

-----Original Message-----
From: Mohammed Shafi [mailto:shafi.ath9k at gmail.com]=20
Sent: Tuesday, April 12, 2011 7:47 AM
To: Hasan Rashid
Cc: ath9k-devel at lists.ath9k.org
Subject: Re: [ath9k-devel] Sparklan WPEA-121N AR9382 168c:abcd

On Mon, Apr 11, 2011 at 11:24 PM, Hasan Rashid <hrashad@avionica.com>=
 wrote:
>
> I have attached the driver load output in dmesg.
>
> By the way why does AR9382 require Kernel 2.6.36 or higher? Can you=20
> list the major requirements?

because the hardware code(HAL) will be present from that kernel version=
 only.
>
> Hasan R.
>
> -----Original Message-----
> From: ath9k-devel-bounces at lists.ath9k.org
> [mailto:ath9k-devel-bounces at lists.ath9k.org] On Behalf Of Peter Stuge
> Sent: Monday, April 11, 2011 12:20 PM
> To: ath9k-devel at lists.ath9k.org
> Subject: Re: [ath9k-devel] Sparklan WPEA-121N AR9382 168c:abcd
>
> Mohammed Shafi wrote:
>> to make sure that HT is configured in driver please do this
>>
>> diff --git a/drivers/net/wireless/ath/ath9k/hw.c
>> b/drivers/net/wireless/ath/ath9k/hw.c
>> index 1b5bd13..720a866 100644
>> --- a/drivers/net/wireless/ath/ath9k/hw.c
>> +++ b/drivers/net/wireless/ath/ath9k/hw.c
>> @@ -1855,6 +1855,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
>> =A0 =A0 =A0 =A0 else
>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 pCap->hw_caps &=3D ~ATH9K_HW_CAP_HT;
>>
>> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 pCap->hw_caps |=3D ATH9K_HW_CAP_HT;
>> +
>
> The indentation is off, or do you mean to include the added line only=20
> within the else block? If so, remember to add braces.
>
>
> //Peter
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
> This communication contains information that may be confidential or=20
> privileged. The information is solely intended for the use of the addr=
essee. If you are not the intended recipient, be advised that any disclo=
sure, copy, distribution, or use of the contents of this communication=
 is prohibited. If you have received this communication in error, please=
 immediately notify the sender by telephone or by electronic mail.
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
>


This communication contains information that may be confidential or priv=
ileged. The information is solely intended for the use of the addressee.=
 If you are not the intended recipient, be advised that any disclosure,=
 copy, distribution, or use of the contents of this communication is pro=
hibited. If you have received this communication in
error, please immediately notify the sender by telephone or by electroni=
c mail.
------_=_NextPart_001_01CBF922.E6EB9838
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; charset=3Diso-88=
59-1">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version 6.5.7654.=
12">
<TITLE>RE: [ath9k-devel] Sparklan WPEA-121N AR9382 168c:abcd</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/plain format -->

<P><FONT SIZE=3D2>I put another Sparklan card in a Windows XP machine=
 and following are the device ids reported by the Atheros driver on Wind=
ows. It seems it is reporting the correct 0x168c, and 0x0030.<BR>
<BR>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-04-07  5:55 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2011-04-07  5:55 UTC (permalink / raw)
  To: ath9k-devel

-------------------------------<br>
Device Instance Id:<br>
PCI\VEN_168C&amp;DEV_0030&amp;SUBSYS_3116168C&amp;REV_01\4&amp;492937F&amp;=
0&amp;00E2<br>
<br>
Hardware Ids:<br>
PCI\VEN_168C&amp;DEV_0030&amp;SUBSYS_3116168C&amp;REV_01<br>
PCI\VEN_168C&amp;DEV_0030&amp;SUBSYS_3116168C<br>
PCI\VEN_168C&amp;DEV_0030&amp;CC_028000<br>
PCI\VEN_168C&amp;DEV_0030&amp;CC_0280<br>
<br>
Compatible Ids:<br>
PCI\VEN_168C&amp;DEV_0030&amp;REV_01<br>
PCI\VEN_168C&amp;DEV_0030<br>
PCI\VEN_168C&amp;CC_028000<br>
PCI\VEN_168C&amp;CC_0280<br>
PCI\VEN_168C<br>
PCI\CC_028000<br>
PCI\CC_0280<br>
<br>
Matching Device Id:<br>
pci\ven_168c&amp;dev_0030&amp;subsys_3116168c<br>
<br>
<br>
Here is the interesting bit, when I first hooked this card I booted my mach=
ine in Ubuntu I saw the same 168c:ABCD. After using it under Windows, I boo=
ted in to Linux today and found that it is reporting the expected IDs. Now =
ath9k works right out of the box, no Vendor ID hacking required. I am using=
 it as station right now. The other card is in a different machine. I will =
try to swap the cards to verify my theory. I am thinking the Windows driver=
 applied a firmware update to the card. Or, the other card skipped quality =
checks and has bogus EEPROM data. Any thoughts?<br>

<br>
0e:00.0 Network controller [0280]: Atheros Communications Inc. AR9300 Wirel=
ess LAN adaptor [168c:0030] (rev 01)<br>
<br>
lspci -vvvnn returns<br>
<br>
0e:00.0 Network controller [0280]: Atheros Communications Inc. AR9300 Wirel=
ess LAN adaptor [168c:0030] (rev 01)<br>
=A0=A0=A0=A0=A0=A0=A0 Subsystem: Atheros Communications Inc. Device [168c:3=
116]</font></p><div class=3D"im"><font size=3D"2"><br>
=A0=A0=A0=A0=A0=A0=A0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGA=
Snoop- ParErr- Stepping- SERR- FastB2B- DisINTx-<br>
=A0=A0=A0=A0=A0=A0=A0 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfa=
st &gt;TAbort- &lt;TAbort- &lt;MAbort- &gt;SERR- &lt;PERR- INTx-<br></font>=
</div><font size=3D"2">
=A0=A0=A0=A0=A0=A0=A0 Latency: 0, Cache Line Size: 64 bytes<br>
=A0=A0=A0=A0=A0=A0=A0 Interrupt: pin A routed to IRQ 18<br>
=A0=A0=A0=A0=A0=A0=A0 Region 0: Memory at fa000000 (64-bit, non-prefetchabl=
e) [size=3D128K]<br>
=A0=A0=A0=A0=A0=A0=A0 [virtual] Expansion ROM at f2000000 [disabled] [size=
=3D64K]<br>
=A0=A0=A0=A0=A0=A0=A0 Capabilities: &lt;access denied&gt;<br>
=A0=A0=A0=A0=A0=A0=A0 Kernel driver in use: ath9k<br>
=A0=A0=A0=A0=A0=A0=A0 Kernel modules: ath9k<br>
<br>
<br>
Hasan R.<div class=3D"im"><br>
<br>
-----Original Message-----<br>
From: Mohammed Shafi [<a href=3D"mailto:shafi.ath9k@gmail.com" target=3D"_b=
lank">mailto:shafi.ath9k at gmail.com</a>]<br></div><div class=3D"im">
Sent: Tuesday, April 12, 2011 7:47 AM<br>
To: Hasan Rashid<br></div><div><div></div><div class=3D"h5">
Cc: <a href=3D"mailto:ath9k-devel@lists.ath9k.org" target=3D"_blank">ath9k-=
devel at lists.ath9k.org</a><br>
Subject: Re: [ath9k-devel] Sparklan WPEA-121N AR9382 168c:abcd<br>
<br>
On Mon, Apr 11, 2011 at 11:24 PM, Hasan Rashid &lt;<a href=3D"mailto:hrasha=
d@avionica.com" target=3D"_blank">hrashad at avionica.com</a>&gt; wrote:<br>
&gt;<br>
&gt; I have attached the driver load output in dmesg.<br>
&gt;<br>
&gt; By the way why does AR9382 require Kernel 2.6.36 or higher? Can you<br=
>
&gt; list the major requirements?<br>
<br>
because the hardware code(HAL) will be present from that kernel version onl=
y.<br>
&gt;<br>
&gt; Hasan R.<br>
&gt;<br>
&gt; -----Original Message-----<br>
&gt; From: <a href=3D"mailto:ath9k-devel-bounces@lists.ath9k.org" target=3D=
"_blank">ath9k-devel-bounces at lists.ath9k.org</a><br>
&gt; [<a href=3D"mailto:ath9k-devel-bounces@lists.ath9k.org" target=3D"_bla=
nk">mailto:ath9k-devel-bounces at lists.ath9k.org</a>] On Behalf Of Peter Stug=
e<br>
&gt; Sent: Monday, April 11, 2011 12:20 PM<br>
&gt; To: <a href=3D"mailto:ath9k-devel@lists.ath9k.org" target=3D"_blank">a=
th9k-devel at lists.ath9k.org</a><br>
&gt; Subject: Re: [ath9k-devel] Sparklan WPEA-121N AR9382 168c:abcd<br>
&gt;<br>
&gt; Mohammed Shafi wrote:<br>
&gt;&gt; to make sure that HT is configured in driver please do this<br>
&gt;&gt;<br>
&gt;&gt; diff --git a/drivers/net/wireless/ath/ath9k/hw.c<br>
&gt;&gt; b/drivers/net/wireless/ath/ath9k/hw.c<br>
&gt;&gt; index 1b5bd13..720a866 100644<br>
&gt;&gt; --- a/drivers/net/wireless/ath/ath9k/hw.c<br>
&gt;&gt; +++ b/drivers/net/wireless/ath/ath9k/hw.c<br>
&gt;&gt; @@ -1855,6 +1855,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah=
)<br>
&gt;&gt; =A0 =A0 =A0 =A0 else<br>
&gt;&gt; =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 pCap-&gt;hw_caps &amp;=3D ~ATH9K_H=
W_CAP_HT;<br>
&gt;&gt;<br>
&gt;&gt; + =A0 =A0 =A0 =A0 =A0 =A0 =A0 pCap-&gt;hw_caps |=3D ATH9K_HW_CAP_H=
T;<br>
&gt;&gt; +<br>
&gt;<br>
&gt; The indentation is off, or do you mean to include the added line only<=
br>
&gt; within the else block? If so, remember to add braces.<br>
&gt;<br>
&gt;<br>
&gt; //Peter<br>
&gt; _______________________________________________<br>
&gt; ath9k-devel mailing list<br>
&gt; <a href=3D"mailto:ath9k-devel@lists.ath9k.org" target=3D"_blank">ath9k=
-devel at lists.ath9k.org</a><br>
&gt; <a href=3D"https://lists.ath9k.org/mailman/listinfo/ath9k-devel" targe=
t=3D"_blank">https://lists.ath9k.org/mailman/listinfo/ath9k-devel</a><br>
&gt;<br>
&gt; This communication contains information that may be confidential or<br=
>
&gt; privileged. The information is solely intended for the use of the addr=
essee. If you are not the intended recipient, be advised that any disclosur=
e, copy, distribution, or use of the contents of this communication is proh=
ibited. If you have received this communication in error, please immediatel=
y notify the sender by telephone or by electronic mail.<br>

&gt; _______________________________________________<br>
&gt; ath9k-devel mailing list<br>
&gt; <a href=3D"mailto:ath9k-devel@lists.ath9k.org" target=3D"_blank">ath9k=
-devel at lists.ath9k.org</a><br>
&gt; <a href=3D"https://lists.ath9k.org/mailman/listinfo/ath9k-devel" targe=
t=3D"_blank">https://lists.ath9k.org/mailman/listinfo/ath9k-devel</a><br>
&gt;<br>
&gt;<br>
<br>
</div></div></font>
<p></p><div><div></div><div class=3D"h5">



This communication contains information that may be confidential or privile=
ged. The information is solely intended for the use of the addressee. If yo=
u are not the intended recipient, be advised that any disclosure, copy, dis=
tribution, or use of the contents of this communication is prohibited. If y=
ou have received this communication in<br>
error, please immediately notify the sender by telephone or by electronic m=
ail.
</div></div></div>
<br>_______________________________________________<br>
ath9k-devel mailing list<br>
<a href=3D"mailto:ath9k-devel@lists.ath9k.org">ath9k-devel at lists.ath9k.org<=
/a><br>
<a href=3D"https://lists.ath9k.org/mailman/listinfo/ath9k-devel" target=3D"=
_blank">https://lists.ath9k.org/mailman/listinfo/ath9k-devel</a><br>
<br></blockquote></div><br>

--002215b031060bfd5704a0c0a00c--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-04-07  5:55 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2011-04-07  5:55 UTC (permalink / raw)
  To: ath9k-devel

-------------------------------<BR>
Device Instance Id:<BR>
PCI\VEN_168C&amp;DEV_0030&amp;SUBSYS_3116168C&amp;REV_01\4&amp;492937F&a=
mp;0&amp;00E2<BR>
<BR>
Hardware Ids:<BR>
PCI\VEN_168C&amp;DEV_0030&amp;SUBSYS_3116168C&amp;REV_01<BR>
PCI\VEN_168C&amp;DEV_0030&amp;SUBSYS_3116168C<BR>
PCI\VEN_168C&amp;DEV_0030&amp;CC_028000<BR>
PCI\VEN_168C&amp;DEV_0030&amp;CC_0280<BR>
<BR>
Compatible Ids:<BR>
PCI\VEN_168C&amp;DEV_0030&amp;REV_01<BR>
PCI\VEN_168C&amp;DEV_0030<BR>
PCI\VEN_168C&amp;CC_028000<BR>
PCI\VEN_168C&amp;CC_0280<BR>
PCI\VEN_168C<BR>
PCI\CC_028000<BR>
PCI\CC_0280<BR>
<BR>
Matching Device Id:<BR>
pci\ven_168c&amp;dev_0030&amp;subsys_3116168c<BR>
<BR>
<BR>
Here is the interesting bit, when I first hooked this card I booted my=
 machine in Ubuntu I saw the same 168c:ABCD. After using it under Window=
s, I booted in to Linux today and found that it is reporting the expecte=
d IDs. Now ath9k works right out of the box, no Vendor ID hacking requir=
ed. I am using it as station right now. The other card is in a different=
 machine. I will try to swap the cards to verify my theory. I am thinkin=
g the Windows driver applied a firmware update to the card. Or, the othe=
r card skipped quality checks and has bogus EEPROM data. Any thoughts?<B=
R>
<BR>
0e:00.0 Network controller [0280]: Atheros Communications Inc. AR9300=
 Wireless LAN adaptor [168c:0030] (rev 01)<BR>
<BR>
lspci -vvvnn returns<BR>
<BR>
0e:00.0 Network controller [0280]: Atheros Communications Inc. AR9300=
 Wireless LAN adaptor [168c:0030] (rev 01)<BR>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Subsystem: Atheros Communicat=
ions Inc. Device [168c:3116]<BR>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Control: I/O+ Mem+ BusMaster+=
 SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-=
<BR>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Status: Cap+ 66MHz- UDF- Fast=
B2B- ParErr- DEVSEL=3Dfast &gt;TAbort- &lt;TAbort- &lt;MAbort- &gt;SERR-=
 &lt;PERR- INTx-<BR>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Latency: 0, Cache Line Size:=
 64 bytes<BR>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Interrupt: pin A routed to=
 IRQ 18<BR>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Region 0: Memory at fa000000=
 (64-bit, non-prefetchable) [size=3D128K]<BR>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; [virtual] Expansion ROM at=
 f2000000 [disabled] [size=3D64K]<BR>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Capabilities: &lt;access deni=
ed&gt;<BR>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Kernel driver in use: ath9k<B=
R>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Kernel modules: ath9k<BR>
<BR>
<BR>
Hasan R.<BR>
<BR>
-----Original Message-----<BR>
From: Mohammed Shafi [<A HREF=3D"mailto:shafi.ath9k@gmail.com">mailto:sh=
afi.ath9k at gmail.com</A>]<BR>
Sent: Tuesday, April 12, 2011 7:47 AM<BR>
To: Hasan Rashid<BR>
Cc: ath9k-devel at lists.ath9k.org<BR>
Subject: Re: [ath9k-devel] Sparklan WPEA-121N AR9382 168c:abcd<BR>
<BR>
On Mon, Apr 11, 2011 at 11:24 PM, Hasan Rashid &lt;hrashad at avionica.com&=
gt; wrote:<BR>
&gt;<BR>
&gt; I have attached the driver load output in dmesg.<BR>
&gt;<BR>
&gt; By the way why does AR9382 require Kernel 2.6.36 or higher? Can you=
<BR>
&gt; list the major requirements?<BR>
<BR>
because the hardware code(HAL) will be present from that kernel version=
 only.<BR>
&gt;<BR>
&gt; Hasan R.<BR>
&gt;<BR>
&gt; -----Original Message-----<BR>
&gt; From: ath9k-devel-bounces at lists.ath9k.org<BR>
&gt; [<A HREF=3D"mailto:ath9k-devel-bounces@lists.ath9k.org">mailto:ath9=
k-devel-bounces at lists.ath9k.org</A>] On Behalf Of Peter Stuge<BR>
&gt; Sent: Monday, April 11, 2011 12:20 PM<BR>
&gt; To: ath9k-devel at lists.ath9k.org<BR>
&gt; Subject: Re: [ath9k-devel] Sparklan WPEA-121N AR9382 168c:abcd<BR>
&gt;<BR>
&gt; Mohammed Shafi wrote:<BR>
&gt;&gt; to make sure that HT is configured in driver please do this<BR>
&gt;&gt;<BR>
&gt;&gt; diff --git a/drivers/net/wireless/ath/ath9k/hw.c<BR>
&gt;&gt; b/drivers/net/wireless/ath/ath9k/hw.c<BR>
&gt;&gt; index 1b5bd13..720a866 100644<BR>
&gt;&gt; --- a/drivers/net/wireless/ath/ath9k/hw.c<BR>
&gt;&gt; +++ b/drivers/net/wireless/ath/ath9k/hw.c<BR>
&gt;&gt; @@ -1855,6 +1855,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw=
 *ah)<BR>
&gt;&gt; =A0 =A0 =A0 =A0 else<BR>
&gt;&gt; =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 pCap-&gt;hw_caps &amp;=3D ~ATH9=
K_HW_CAP_HT;<BR>
&gt;&gt;<BR>
&gt;&gt; + =A0 =A0 =A0 =A0 =A0 =A0 =A0 pCap-&gt;hw_caps |=3D ATH9K_HW_CA=
P_HT;<BR>
&gt;&gt; +<BR>
&gt;<BR>
&gt; The indentation is off, or do you mean to include the added line=
 only<BR>
&gt; within the else block? If so, remember to add braces.<BR>
&gt;<BR>
&gt;<BR>
&gt; //Peter<BR>
&gt; _______________________________________________<BR>
&gt; ath9k-devel mailing list<BR>
&gt; ath9k-devel at lists.ath9k.org<BR>
&gt; <A HREF=3D"https://lists.ath9k.org/mailman/listinfo/ath9k-devel">ht=
tps://lists.ath9k.org/mailman/listinfo/ath9k-devel</A><BR>
&gt;<BR>
&gt; This communication contains information that may be confidential=
 or<BR>
&gt; privileged. The information is solely intended for the use of the=
 addressee. If you are not the intended recipient, be advised that any=
 disclosure, copy, distribution, or use of the contents of this communic=
ation is prohibited. If you have received this communication in error,=
 please immediately notify the sender by telephone or by electronic mail=
.<BR>
&gt; _______________________________________________<BR>
&gt; ath9k-devel mailing list<BR>
&gt; ath9k-devel at lists.ath9k.org<BR>
&gt; <A HREF=3D"https://lists.ath9k.org/mailman/listinfo/ath9k-devel">ht=
tps://lists.ath9k.org/mailman/listinfo/ath9k-devel</A><BR>
&gt;<BR>
&gt;<BR>
<BR>
</FONT>
</P>


<!-- Begin Ninja Disclaimer ID 06d1f63c-a7f2-4bdd-9832-359e6e93159e -->
This communication contains information that may be confidential or priv=
ileged. The information is solely intended for the use of the addressee.=
 If you are not the intended recipient, be advised that any disclosure,=
 copy, distribution, or use of the contents of this communication is pro=
hibited. If you have received this communication in<BR>error, please imm=
ediately notify the sender by telephone or by electronic mail.
</BODY>
</HTML>
------_=_NextPart_001_01CBF922.E6EB9838--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-04-07  5:55 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2011-04-07  5:55 UTC (permalink / raw)
  To: ath9k-devel

ATTITUDE ADJUSTMENT (bleeding edge, r26358) ----------

root at jv-2400-ap1:~# uptime
 16:57:14 up 3 days, 14:15, load average: 0.00, 0.01, 0.04
root at jv-2400-ap1:~# iw wlan0 station dump | grep -i failed
	tx failed:	0
	tx failed:	0
	tx failed:	0
	tx failed:	0
	tx failed:	0
	tx failed:	0
	tx failed:	7
	tx failed:	0
	tx failed:	0
root at jv-2400-ap1:~#

-- 
Larry Vaden, CoFounder
Internet Texoma, Inc.
Serving Rural Texomaland Since 1995
We Care About Your Connection!

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-03-22 18:13 nijil yes
  0 siblings, 0 replies; 335+ messages in thread
From: nijil yes @ 2011-03-22 18:13 UTC (permalink / raw)
  To: kernelnewbies

Hi,
could anyone mention what are the projects available for beginners to do in gsoc 
this time from kernel newbies.I am comfortable with c/c++.I would be glad if 
someone could suggest a few

Regards,
Nijil



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20110322/1858b878/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-03-01 14:02 Javier Martin
  0 siblings, 0 replies; 335+ messages in thread
From: Javier Martin @ 2011-03-01 14:02 UTC (permalink / raw)
  To: linux-arm-kernel

This series of patches provides support for audio in Visstrim_M10 boards.

This second version has some fixes in the aic32x4 codec driver as asked by
Mark Brown.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-02-26  6:20 Aldyth Maharsha
  0 siblings, 0 replies; 335+ messages in thread
From: Aldyth Maharsha @ 2011-02-26  6:20 UTC (permalink / raw)
  To: kernelnewbies


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20110226/cfa13c75/attachment.html 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2011-01-13  9:13 Uwe Kleine-König
  0 siblings, 0 replies; 335+ messages in thread
From: Uwe Kleine-König @ 2011-01-13  9:13 UTC (permalink / raw)
  To: linux-arm-kernel

<jason77.wang@gmail.com>
Bcc: 
Subject: Re: i.MX & IRQF_ONESHOT
Reply-To: 
In-Reply-To: <4D2EB6EF.7030608@eukrea.com>

Hello,

[adding tglx who AFAIK invented threaded irqs and the people involved
in 2991a1ca6e9b to Cc]

On Thu, Jan 13, 2011 at 09:25:19AM +0100, Eric B?nard wrote:
> while testing 2.6.37 on our i.MX27 based board - code in
> arch/arm/mach-imx/eukrea_mbimx27-baseboard.c - I noticed the
> touchscreen controller (ADS7846) doesn't work anymore.
> 
> A few IRQ are generated when probing for the chipset and starting
> calibration (usually first point works), then nothing more (even if
> the IRQ signals is generated as seen on the scope, the irq count
> doesn't increase anymore and stays <= 4 and no data is reported to
> the input layer).
> 
> drivers/input/touchscreen/ads7846.c was switched to threaded IRQ in
> commit 2991a1ca6e9b13b639a82c0eec0cbc191bf1f42f where was added :
> irq_flags |= IRQF_ONESHOT;
AFAIK this is how threaded irq usually work.  The irq should get
reenabled by irq_thread -> irq_finalize_oneshot then.

> Commenting out this line in the ads7846 driver makes it work again.
> Am I missing something obvious or is there a reason for IRQF_ONESHOT
> creating trouble with gpio irq or SPI on i.MX ?
I don't know.  Is the irq masked?  pending?

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-12-19 23:59 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-12-19 23:59 UTC (permalink / raw)
  To: ath9k-devel

chip haven't been woken up.

The AR9280 support works (for values of "work") in FreeBSD, so I'm
thinking the local code is missing a couple of relevant register
settings to enable the thing.

Does anyone know off-hand what I may need to glimpse at to make it
work? What's different between the AR9280 and AR9220 initialisation
sequences? I couldn't see anything AR9220 specific in ath9k.

Thanks,


Adrian

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-12-19 23:59 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-12-19 23:59 UTC (permalink / raw)
  To: ath9k-devel

rupt earlier. For example, I send 1st frame=A0 with rate MCS 1 and 2nd fram=
e with MCS 2, but some time I can get hw tx interrupt for second frame eali=
er than the first. I think this may relate to the aggregation. So I have tr=
ied set ATH_AMPDU_SUBFRAME_DEFAULT to 1, but that doesn&#39;t help. Then I =
tried substitute ath_tx_send_ampdu with ath_tx_send_normal in ath_tx_start_=
dma, and I find that disorder issue doesn&#39;t happen again. Also, I find =
that <br>

in the disorder case, it looks like that transmitter triggers ath_tx_txqadd=
buf for 1st then for 2nd, however, immediately ath_tx_txqaddbuf is triggere=
d again and for 2nd first, and 1st. But from tx_info.status, I find that bo=
th 1st and 2nd frame is transmitted once and successfully received.<br>

<br>Moreover, the transmitter may send 1st aggregation frame with sequence =
from 0-31, and send 2nd aggregation frame with sequence 32-63 immediately, =
and then based on the tx_info.status, transmitter send the un-acked frame i=
n the later frame. In this case, I mean, transmitter can send the 2nd aggre=
gation frame without knowing the result for the first one, is this right?<b=
r>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-12-19 23:59 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-12-19 23:59 UTC (permalink / raw)
  To: ath9k-devel

MIMO, but with only two spatial streams, so it should handle MCS0
through MCS15.  Check the output of "iw list" for a line like the
following:

HT TX/RX MCS rate indexes supported: 0-15

It is possible for a card to support multiple spatial streams without
having support for space-time block coding.

-Brian

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-12-19 23:59 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-12-19 23:59 UTC (permalink / raw)
  To: ath9k-devel

rupt earlier. For example, I send 1st frame=A0 with rate MCS 1 and 2nd fram=
e with MCS 2, but some time I can get hw tx interrupt for second frame eali=
er than the first. I think this may relate to the aggregation. So I have tr=
ied set ATH_AMPDU_SUBFRAME_DEFAULT to 1, but that doesn&#39;t help. Then I =
tried substitute ath_tx_send_ampdu with ath_tx_send_normal in ath_tx_start_=
dma, and I find that disorder issue doesn&#39;t happen again. Also, I find =
that <br>
in the disorder case, it looks like that transmitter triggers ath_tx_txqadd=
buf for 1st then for 2nd, however, immediately ath_tx_txqaddbuf is triggere=
d again and for 2nd first, and 1st. But from tx_info.status, I find that bo=
th 1st and 2nd frame is transmitted once and successfully received.<br>
<br>Moreover, the transmitter may send 1st aggregation frame with sequence =
from 0-31, and send 2nd aggregation frame with sequence 32-63 immediately, =
and then based on the tx_info.status, transmitter send the un-acked frame i=
n the later frame. In this case, I mean, transmitter can send the 2nd aggre=
gation frame without knowing the result for the first one, is this right?<b=
r>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-12-19 23:59 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-12-19 23:59 UTC (permalink / raw)
  To: ath9k-devel

<br>
* If your RX chainmask has &gt;1 radio enabled, you&#39;ll always be doing<=
br>
receive-side &quot;diversity&quot; (which is really &quot;combining&quot; (=
MRC) if I<br>
understand the technology correctly on multi-radio atheros 11n cards);<br>
* If your TX chainmask has &gt;1 radio enabled and the TX descriptor has<br=
>
the relevant chainmask bits set, you should be transmitting on both<br>
antennas regardless of the rate. I honestly haven&#39;t verified it (I&#39;=
ve<br>
only verified that behaviour for transmitting legacy rates out of the<br>
11n chips);<br>
<br>
* For rates &lt; MCS8 (and legacy rates) there&#39;s further TX-side tricke=
ry<br>
that can be going on which I&#39;m not too up-to-date on. For example,<br>
some (all?) of the 11n chips allow you to optionally transmit MCS0-7<br>
using STBC. But iirc, STBC is only enabled for 1-stream TX.<br>
<br>
In short, if you&#39;ve got all the radios enabled =A0for RX and ath9k is<b=
r>
enabling both/all radio chains when TX&#39;ing, I think the answer is<br>
&quot;yes&quot; for you. :)<br>
<br>
Adrian<br>
<br>
On 16 February 2011 22:47, Baldomero Coll &lt;<a href=3D"mailto:baldo.ath9k=
@gmail.com" target=3D"_blank">baldo.ath9k at gmail.com</a>&gt; wrote:<br>
&gt; I&#39;m not sure, but I&#39;ve read somewhere that by default the two =
antennas are<br>
&gt; used.<br>
&gt; It is true that I&#39;m not interested in selecting the number of ante=
nnas, what<br>
&gt; I really want is that the MIMO capability is exploited if I&#39;m usin=
g 802.11n<br>
&gt; HT IBSS operation mode.<br>
&gt; Can someone confirm that by default the two antennas (spatial diversit=
y) are<br>
&gt; being used when we create the HT IBSS network?<br>
&gt;<br>
&gt; 2011/2/16 Mohammed Shafi &lt;<a href=3D"mailto:shafi.ath9k@gmail.com" =
target=3D"_blank">shafi.ath9k at gmail.com</a>&gt;<br>
&gt;&gt;<br>
&gt;&gt; On Tue, Feb 15, 2011 at 2:35 PM, Baldomero Coll &lt;<a href=3D"mai=
lto:baldo.ath9k@gmail.com" target=3D"_blank">baldo.ath9k at gmail.com</a>&gt;<=
br>
&gt;&gt; wrote:<br>
&gt;&gt; &gt; Hello,<br>
&gt;&gt; &gt;<br>
&gt;&gt; &gt; Can you please tell me how do you select one o two antennas?<=
br>
&gt;&gt;<br>
&gt;&gt; I don&#39;t know why you should do that. I guess changing the tx/r=
x<br>
&gt;&gt; chainmask will do after it was read from eeprom.<br>
&gt;&gt;<br>
&gt;&gt; &gt;<br>
&gt;&gt; &gt; I&#39;m using a similar setting than you:<br>
&gt;&gt; &gt; Linux kernel: 2.6.32-28-generic-pae.<br>
&gt;&gt; &gt; Driver: compat-wireless-2011-01-17 and iw-0.9.21 with the pat=
ch<br>
&gt;&gt; &gt; suggested by<br>
&gt;&gt; &gt; Alex.<br>
&gt;&gt; &gt; Radio card: Ubiquiti SR71x<br>
&gt;&gt; &gt;<br>
&gt;&gt; &gt; Thanks in advance,<br>
&gt;&gt; &gt; Baldomero<br>
&gt;&gt; &gt;&gt;<br>
&gt;&gt; &gt;&gt; Hi all,<br>
&gt;&gt; &gt;&gt;<br>
&gt;&gt; &gt;&gt; I would like to confirm my findings. My test platform con=
figurations<br>
&gt;&gt; &gt;&gt; are<br>
&gt;&gt; &gt;&gt; follow.<br>
&gt;&gt; &gt;&gt; Board: pcengine alix3d2<br>
&gt;&gt; &gt;&gt; Linux kernel: 2.6.35 from linux-wireless git<br>
&gt;&gt; &gt;&gt; Driver: compat-wireless-2011-01-17 and iw-0.9.21 with the=
 patch<br>
&gt;&gt; &gt;&gt; suggested by Alex.<br>
&gt;&gt; &gt;&gt; Radio card: Ubiqiti SR71a on channel 36 with HT40+<br>
&gt;&gt; &gt;&gt; Measurement tool and settings: Iperf, UDP, 100Mb offered =
load<br>
&gt;&gt; &gt;&gt;<br>
&gt;&gt; &gt;&gt; Recored throughput: 50-54Mbps (one antenna); 78-80Mbps (t=
wo or three<br>
&gt;&gt; &gt;&gt; antennas).<br>
&gt;&gt; &gt;<br>
&gt;&gt; &gt;<br>
&gt;&gt; &gt; _______________________________________________<br>
&gt;&gt; &gt; ath9k-devel mailing list<br>
&gt;&gt; &gt; <a href=3D"mailto:ath9k-devel@lists.ath9k.org" target=3D"_bla=
nk">ath9k-devel at lists.ath9k.org</a><br>
&gt;&gt; &gt; <a href=3D"https://lists.ath9k.org/mailman/listinfo/ath9k-dev=
el" target=3D"_blank">https://lists.ath9k.org/mailman/listinfo/ath9k-devel<=
/a><br>
&gt;&gt; &gt;<br>
&gt;&gt; &gt;<br>
&gt;<br>
&gt;<br>
&gt; _______________________________________________<br>
&gt; ath9k-devel mailing list<br>
&gt; <a href=3D"mailto:ath9k-devel@lists.ath9k.org" target=3D"_blank">ath9k=
-devel at lists.ath9k.org</a><br>
&gt; <a href=3D"https://lists.ath9k.org/mailman/listinfo/ath9k-devel" targe=
t=3D"_blank">https://lists.ath9k.org/mailman/listinfo/ath9k-devel</a><br>
&gt;<br>
&gt;<br>
</blockquote></div></div></div><br>
</blockquote></div><br></div>

--0016362847b84c7571049c7ca7bc--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-12-19 23:59 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-12-19 23:59 UTC (permalink / raw)
  To: ath9k-devel

discarded. But for ping packet __ieee80211_parse_tx_radiotap function
returns false. Surprisingly radtap_hdr_len is getting printed to be 65535,
which I assumed will be 0 at this point.

So in function  ieee80211_monitor_start_xmit(), i tried following
approaches:
1) pulling radio tap header from skb and disabling RADIOTAP flag and send
rest of skb as it is.
2) allocate a new skb of size  ieee80211_hdr and assigning  first 2 bytes of
skb->data to  0x08 and 0x02 and pass this skb to the called functions.
However i could not see any activity over the air. :(.
I am not using packetspammer like utlity to send packets to driver, but just
ping packets.
Any suggestion over this will be appreciated.

Thanks
-Sagar

--20cf3079bdf4c2e5cd049d932c1c
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hi, <br>For my research, I want to send the packet at a specified time. I g=
uess monitor mode is suitable for this. <br>From code it looks like in moni=
tor mode the radiotap header is parsed and discarded. But for ping packet _=
_ieee80211_parse_tx_radiotap function returns false. Surprisingly radtap_hd=
r_len is getting printed to be 65535, which I assumed will be 0 at this poi=
nt.<br>

<br>So in function=A0 ieee80211_monitor_start_xmit(), i tried following app=
roaches:<br>1) pulling radio tap header from skb and disabling RADIOTAP fla=
g and send rest of skb as it is. <br>2) allocate a new skb of size=A0 ieee8=
0211_hdr and assigning=A0 first 2 bytes of skb-&gt;data to=A0 0x08 and 0x02=
 and pass this skb to the called functions.<br>

However i could not see any activity over the air. :(. <br>I am not using p=
acketspammer like utlity to send packets to driver, but just ping packets.<=
br>Any suggestion over this will be appreciated. <br><br>Thanks<br>-Sagar<b=
r>


--20cf3079bdf4c2e5cd049d932c1c--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-12-19 23:59 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-12-19 23:59 UTC (permalink / raw)
  To: ath9k-devel

hen the transmitter receive the hw tx interrupt, is there anything wrong or=
 missing? Actually, I don&#39;t quite understand how aggregation works in a=
th9k, could you give some information? <br>
<br>Thank you for your time on this.<br><br>Best regards,<br>Jerry Zhao<br>

--0016e649cdb2575291049ce47042--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-12-19 23:59 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-12-19 23:59 UTC (permalink / raw)
  To: ath9k-devel

* If your RX chainmask has >1 radio enabled, you'll always be doing
receive-side "diversity" (which is really "combining" (MRC) if I
understand the technology correctly on multi-radio atheros 11n cards);
* If your TX chainmask has >1 radio enabled and the TX descriptor has
the relevant chainmask bits set, you should be transmitting on both
antennas regardless of the rate. I honestly haven't verified it (I've
only verified that behaviour for transmitting legacy rates out of the
11n chips);

* For rates < MCS8 (and legacy rates) there's further TX-side trickery
that can be going on which I'm not too up-to-date on. For example,
some (all?) of the 11n chips allow you to optionally transmit MCS0-7
using STBC. But iirc, STBC is only enabled for 1-stream TX.

In short, if you've got all the radios enabled  for RX and ath9k is
enabling both/all radio chains when TX'ing, I think the answer is
"yes" for you. :)



Adrian

On 16 February 2011 22:47, Baldomero Coll <baldo.ath9k@gmail.com> wrote:
> I'm not sure, but I've read somewhere that by default the two antennas are
> used.
> It is true that I'm not interested in selecting the number of antennas, what
> I really want is that the MIMO capability is exploited if I'm using 802.11n
> HT IBSS operation mode.
> Can someone confirm that by default the two antennas (spatial diversity) are
> being used when we create the HT IBSS network?
>
> 2011/2/16 Mohammed Shafi <shafi.ath9k@gmail.com>
>>
>> On Tue, Feb 15, 2011 at 2:35 PM, Baldomero Coll <baldo.ath9k@gmail.com>
>> wrote:
>> > Hello,
>> >
>> > Can you please tell me how do you select one o two antennas?
>>
>> I don't know why you should do that. I guess changing the tx/rx
>> chainmask will do after it was read from eeprom.
>>
>> >
>> > I'm using a similar setting than you:
>> > Linux kernel: 2.6.32-28-generic-pae.
>> > Driver: compat-wireless-2011-01-17 and iw-0.9.21 with the patch
>> > suggested by
>> > Alex.
>> > Radio card: Ubiquiti SR71x
>> >
>> > Thanks in advance,
>> > Baldomero
>> >>
>> >> Hi all,
>> >>
>> >> I would like to confirm my findings. My test platform configurations
>> >> are
>> >> follow.
>> >> Board: pcengine alix3d2
>> >> Linux kernel: 2.6.35 from linux-wireless git
>> >> Driver: compat-wireless-2011-01-17 and iw-0.9.21 with the patch
>> >> suggested by Alex.
>> >> Radio card: Ubiqiti SR71a on channel 36 with HT40+
>> >> Measurement tool and settings: Iperf, UDP, 100Mb offered load
>> >>
>> >> Recored throughput: 50-54Mbps (one antenna); 78-80Mbps (two or three
>> >> antennas).
>> >
>> >
>> > _______________________________________________
>> > ath9k-devel mailing list
>> > ath9k-devel at lists.ath9k.org
>> > https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>> >
>> >
>
>
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-12-19 23:59 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-12-19 23:59 UTC (permalink / raw)
  To: ath9k-devel

interrupt earlier. For example, I send 1st frame  with rate MCS 1 and 2nd
frame with MCS 2, but some time I can get hw tx interrupt for second frame
ealier than the first. I think this may relate to the aggregation. So I have
tried set ATH_AMPDU_SUBFRAME_DEFAULT to 1, but that doesn't help. Then I
tried substitute ath_tx_send_ampdu with ath_tx_send_normal in
ath_tx_start_dma, and I find that disorder issue doesn't happen again. Also,
I find that
in the disorder case, it looks like that transmitter triggers
ath_tx_txqaddbuf for 1st then for 2nd, however, immediately ath_tx_txqaddbuf
is triggered again and for 2nd first, and 1st. But from tx_info.status, I
find that both 1st and 2nd frame is transmitted once and successfully
received.

Moreover, the transmitter may send 1st aggregation frame with sequence from
0-31, and send 2nd aggregation frame with sequence 32-63 immediately, and
then based on the tx_info.status, transmitter send the un-acked frame in the
later frame. In this case, I mean, transmitter can send the 2nd aggregation
frame without knowing the result for the first one, is this right?

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-12-19 23:59 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-12-19 23:59 UTC (permalink / raw)
  To: ath9k-devel

rupt earlier. For example, I send 1st frame=A0 with rate MCS 1 and 2nd fram=
e with MCS 2, but some time I can get hw tx interrupt for second frame eali=
er than the first. I think this may relate to the aggregation. So I have tr=
ied set ATH_AMPDU_SUBFRAME_DEFAULT to 1, but that doesn&#39;t help. Then I =
tried substitute ath_tx_send_ampdu with ath_tx_send_normal in ath_tx_start_=
dma, and I find that disorder issue doesn&#39;t happen again. Also, I find =
that <br>

in the disorder case, it looks like that transmitter triggers ath_tx_txqadd=
buf for 1st then for 2nd, however, immediately ath_tx_txqaddbuf is triggere=
d again and for 2nd first, and 1st. But from tx_info.status, I find that bo=
th 1st and 2nd frame is transmitted once and successfully received.<br>

<br>Moreover, the transmitter may send 1st aggregation frame with sequence =
from 0-31, and send 2nd aggregation frame with sequence 32-63 immediately, =
and then based on the tx_info.status, transmitter send the un-acked frame i=
n the later frame. In this case, I mean, transmitter can send the 2nd aggre=
gation frame without knowing the result for the first one, is this right?<b=
r>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-12-19 23:59 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-12-19 23:59 UTC (permalink / raw)
  To: ath9k-devel

hen the transmitter receive the hw tx interrupt, is there anything wrong or=
 missing? Actually, I don&#39;t quite understand how aggregation works in a=
th9k, could you give some information? <br>

<br>Thank you for your time on this.<br><br>Best regards,<br>Jerry Zhao<br>
</blockquote></div><br>

--0016e659f780473917049cfe2f87--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-12-19 23:59 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-12-19 23:59 UTC (permalink / raw)
  To: ath9k-devel

when the transmitter receive the hw tx interrupt, is there anything wrong or
missing? Actually, I don't quite understand how aggregation works in ath9k,
could you give some information?

Thank you for your time on this.

Best regards,
Jerry Zhao

--0016e649cdb2575291049ce47042
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Dear all,<br>Good day.<br>I have got a question about disorder of hw tx int=
erupt. I am looking for your helps. Thanks in advance.<br>I am using D-link=
 652 and ubuntu 10.04 as my platform.<br>I am running some tests, I set fra=
mes with an cyclic increasing rate from MCS 0 - MCS 15, it&#39;s done per f=
rame. After the transmitter sends the frame, it gets a hw tx interrupt afte=
r successful transmission or no ack.<br>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-12-19 23:59 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-12-19 23:59 UTC (permalink / raw)
  To: ath9k-devel

<br>
* If your RX chainmask has &gt;1 radio enabled, you&#39;ll always be doing<=
br>
receive-side &quot;diversity&quot; (which is really &quot;combining&quot; (=
MRC) if I<br>
understand the technology correctly on multi-radio atheros 11n cards);<br>
* If your TX chainmask has &gt;1 radio enabled and the TX descriptor has<br=
>
the relevant chainmask bits set, you should be transmitting on both<br>
antennas regardless of the rate. I honestly haven&#39;t verified it (I&#39;=
ve<br>
only verified that behaviour for transmitting legacy rates out of the<br>
11n chips);<br>
<br>
* For rates &lt; MCS8 (and legacy rates) there&#39;s further TX-side tricke=
ry<br>
that can be going on which I&#39;m not too up-to-date on. For example,<br>
some (all?) of the 11n chips allow you to optionally transmit MCS0-7<br>
using STBC. But iirc, STBC is only enabled for 1-stream TX.<br>
<br>
In short, if you&#39;ve got all the radios enabled =C2=A0for RX and ath9k i=
s<br>
enabling both/all radio chains when TX&#39;ing, I think the answer is<br>
&quot;yes&quot; for you. :)<br>
<br>
Adrian<br>
<br>
On 16 February 2011 22:47, Baldomero Coll &lt;<a href=3D"mailto:baldo.ath9k=
@gmail.com">baldo.ath9k at gmail.com</a>&gt; wrote:<br>
&gt; I&#39;m not sure, but I&#39;ve read somewhere that by default the two =
antennas are<br>
&gt; used.<br>
&gt; It is true that I&#39;m not interested in selecting the number of ante=
nnas, what<br>
&gt; I really want is that the MIMO capability is exploited if I&#39;m usin=
g 802.11n<br>
&gt; HT IBSS operation mode.<br>
&gt; Can someone confirm that by default the two antennas (spatial diversit=
y) are<br>
&gt; being used when we create the HT IBSS network?<br>
&gt;<br>
&gt; 2011/2/16 Mohammed Shafi &lt;<a href=3D"mailto:shafi.ath9k@gmail.com">=
shafi.ath9k at gmail.com</a>&gt;<br>
&gt;&gt;<br>
&gt;&gt; On Tue, Feb 15, 2011 at 2:35 PM, Baldomero Coll &lt;<a href=3D"mai=
lto:baldo.ath9k@gmail.com">baldo.ath9k at gmail.com</a>&gt;<br>
&gt;&gt; wrote:<br>
&gt;&gt; &gt; Hello,<br>
&gt;&gt; &gt;<br>
&gt;&gt; &gt; Can you please tell me how do you select one o two antennas?<=
br>
&gt;&gt;<br>
&gt;&gt; I don&#39;t know why you should do that. I guess changing the tx/r=
x<br>
&gt;&gt; chainmask will do after it was read from eeprom.<br>
&gt;&gt;<br>
&gt;&gt; &gt;<br>
&gt;&gt; &gt; I&#39;m using a similar setting than you:<br>
&gt;&gt; &gt; Linux kernel: 2.6.32-28-generic-pae.<br>
&gt;&gt; &gt; Driver: compat-wireless-2011-01-17 and iw-0.9.21 with the pat=
ch<br>
&gt;&gt; &gt; suggested by<br>
&gt;&gt; &gt; Alex.<br>
&gt;&gt; &gt; Radio card: Ubiquiti SR71x<br>
&gt;&gt; &gt;<br>
&gt;&gt; &gt; Thanks in advance,<br>
&gt;&gt; &gt; Baldomero<br>
&gt;&gt; &gt;&gt;<br>
&gt;&gt; &gt;&gt; Hi all,<br>
&gt;&gt; &gt;&gt;<br>
&gt;&gt; &gt;&gt; I would like to confirm my findings. My test platform con=
figurations<br>
&gt;&gt; &gt;&gt; are<br>
&gt;&gt; &gt;&gt; follow.<br>
&gt;&gt; &gt;&gt; Board: pcengine alix3d2<br>
&gt;&gt; &gt;&gt; Linux kernel: 2.6.35 from linux-wireless git<br>
&gt;&gt; &gt;&gt; Driver: compat-wireless-2011-01-17 and iw-0.9.21 with the=
 patch<br>
&gt;&gt; &gt;&gt; suggested by Alex.<br>
&gt;&gt; &gt;&gt; Radio card: Ubiqiti SR71a on channel 36 with HT40+<br>
&gt;&gt; &gt;&gt; Measurement tool and settings: Iperf, UDP, 100Mb offered =
load<br>
&gt;&gt; &gt;&gt;<br>
&gt;&gt; &gt;&gt; Recored throughput: 50-54Mbps (one antenna); 78-80Mbps (t=
wo or three<br>
&gt;&gt; &gt;&gt; antennas).<br>
&gt;&gt; &gt;<br>
&gt;&gt; &gt;<br>
&gt;&gt; &gt; _______________________________________________<br>
&gt;&gt; &gt; ath9k-devel mailing list<br>
&gt;&gt; &gt; <a href=3D"mailto:ath9k-devel@lists.ath9k.org">ath9k-devel at li=
sts.ath9k.org</a><br>
&gt;&gt; &gt; <a href=3D"https://lists.ath9k.org/mailman/listinfo/ath9k-dev=
el" target=3D"_blank">https://lists.ath9k.org/mailman/listinfo/ath9k-devel<=
/a><br>
&gt;&gt; &gt;<br>
&gt;&gt; &gt;<br>
&gt;<br>
&gt;<br>
&gt; _______________________________________________<br>
&gt; ath9k-devel mailing list<br>
&gt; <a href=3D"mailto:ath9k-devel@lists.ath9k.org">ath9k-devel at lists.ath9k=
.org</a><br>
&gt; <a href=3D"https://lists.ath9k.org/mailman/listinfo/ath9k-devel" targe=
t=3D"_blank">https://lists.ath9k.org/mailman/listinfo/ath9k-devel</a><br>
&gt;<br>
&gt;<br>
</blockquote></div><br>

--002215048f672c1ad2049c7703f8--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-12-19 23:59 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-12-19 23:59 UTC (permalink / raw)
  To: ath9k-devel

hen the transmitter receive the hw tx interrupt, is there anything wrong or=
 missing? Actually, I don&#39;t quite understand how aggregation works in a=
th9k, could you give some information? <br>

<br>Thank you for your time on this.<br><br>Best regards,<br>Jerry Zhao<br>
<br>_______________________________________________<br>
ath9k-devel mailing list<br>
<a href=3D"mailto:ath9k-devel@lists.ath9k.org">ath9k-devel at lists.ath9k.org<=
/a><br>
<a href=3D"https://lists.ath9k.org/mailman/listinfo/ath9k-devel" target=3D"=
_blank">https://lists.ath9k.org/mailman/listinfo/ath9k-devel</a><br>
<br></blockquote></div><br></div></div>

--bcaec53f8e215e2cfc049ce55219--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-12-03  1:08 tarek attia
  0 siblings, 0 replies; 335+ messages in thread
From: tarek attia @ 2010-12-03  1:08 UTC (permalink / raw)
  To: linux-arm-kernel

register

-- 
tarek

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-10-08  6:02 Daein Moon
  0 siblings, 0 replies; 335+ messages in thread
From: Daein Moon @ 2010-10-08  6:02 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Ben Dooks and Kukjin,

I found an issue about s3c_gpio_getpull API.

The 'plat-samsung' provides 's3c_gpio_setpull' and 's3c_gpio_getpull'
to set and get pull-{none|up|down} of GPIO. But there is no
's3c_gpio_getpull' definition in 'arch/arm/plat-samsung/gpio-config.c',
and there is only declaration in the corresponding header file.

's3c_gpio_getpull' isn't supported/used. So if providing this api, its
definition should be inserted.

Otherwise, code that is used to provide s3c_gpio_getpull including
following code should be removed.

arch/arm/plat-samsung/include/plat/gpio-cfg.h:
	extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);

arch/arm/mach-{s3c*|s5p*}/gpiolib.c:
        .get_pull       = s3c_gpio_getpull_updown,


What do you think about that?

Best Regards,
Daein Moon

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-09-24 14:53 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-09-24 14:53 UTC (permalink / raw)
  To: ath9k-devel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-09-24 14:53 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-09-24 14:53 UTC (permalink / raw)
  To: ath9k-devel

Like you said, it is low because both interfaces share the medium but if I don??t change the rate using iwconfig, this values or at least the first one goes down until 1,5 MBits. That??s way I wonder if there is something that keeps the rate low by the time a virtual interface is created. 

Thanks for your response

Best regards

Lorna 


-------- Original-Nachricht --------
> Datum: Thu, 11 Nov 2010 09:00:45 -0800
> Von: Ben Greear <greearb@candelatech.com>
> An: "Lorna Gonz??lez" <lorna.glez@gmx.net>
> CC: Jouni Malinen <jouni.malinen@atheros.com>, ath9k-devel at venema.h4ckr.net
> Betreff: Re: [ath9k-devel] ath9k: Virtual interface as AP

> On 11/11/2010 07:06 AM, "Lorna Gonz??lez" wrote:
> >
> > Hello
> >
> > I finally got a station an a virtual AP working on the same channel
> using the setup below. I made some test sending TCP through iperf between the
> AP and the station and the VAP to a station associated with it.
> > Using an AP operating with Ieee802.11n, an atheros AR928X and without
> virtual interfaces I get a max throughput of 50 MBits/s.
> > As soon as I start using my desired setup, the thoughput of the station
> is about 15 MBits/s... I actually need to make the rate fixed using
> iwconfig to get this max. Otherwise the traffic is sent at 1 MBit/s.
> >
> > Can someone please tell me how is the behaviour of the rate control in
> case of virtual interfaces on mac80211?
> 
> Can you give a more detailed description/diagram of your virtual AP setup
> and
> network throughput test?  It sounds like you are using the same radio as
> AP
> and STA?  If so, then of course you are going to get less bandwidth on the
> VIFS because they have to share the radio.
> 
> I'm not sure it should drop all the way to 15Mbps, though.  We haven't
> done a lot of throughput
> testing yet, but if we use two STA vifs on the ath9k box connected to an
> 80211n AP (trendnet),
> then we can set a max of about 9Mbps tx + rx across each STA (the STAs are
> sending to each other).
> That is around 40Mbps total tx + rx across the radio.
> 
> Thanks,
> Ben
> 
> -- 
> Ben Greear <greearb@candelatech.com>
> Candela Technologies Inc  http://www.candelatech.com
> 

-- 
Neu: GMX De-Mail - Einfach wie E-Mail, sicher wie ein Brief!  
Jetzt De-Mail-Adresse reservieren: http://portal.gmx.net/de/go/demail

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-09-24 14:53 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-09-24 14:53 UTC (permalink / raw)
  To: ath9k-devel

Like you said, it is low because both interfaces share the medium but if I don??t change the rate using iwconfig, this values or at least the first one goes down until 1,5 MBits. That??s way I wonder if there is something that keeps the rate low by the time a virtual interface is created. 

Thanks for your response

Best regards

Lorna 


-------- Original-Nachricht --------
> Datum: Thu, 11 Nov 2010 09:00:45 -0800
> Von: Ben Greear <greearb@candelatech.com>
> An: "Lorna Gonz??lez" <lorna.glez@gmx.net>
> CC: Jouni Malinen <jouni.malinen@atheros.com>, ath9k-devel at venema.h4ckr.net
> Betreff: Re: [ath9k-devel] ath9k: Virtual interface as AP

> On 11/11/2010 07:06 AM, "Lorna Gonz??lez" wrote:
> >
> > Hello
> >
> > I finally got a station an a virtual AP working on the same channel
> using the setup below. I made some test sending TCP through iperf between the
> AP and the station and the VAP to a station associated with it.
> > Using an AP operating with Ieee802.11n, an atheros AR928X and without
> virtual interfaces I get a max throughput of 50 MBits/s.
> > As soon as I start using my desired setup, the thoughput of the station
> is about 15 MBits/s... I actually need to make the rate fixed using
> iwconfig to get this max. Otherwise the traffic is sent at 1 MBit/s.
> >
> > Can someone please tell me how is the behaviour of the rate control in
> case of virtual interfaces on mac80211?
> 
> Can you give a more detailed description/diagram of your virtual AP setup
> and
> network throughput test?  It sounds like you are using the same radio as
> AP
> and STA?  If so, then of course you are going to get less bandwidth on the
> VIFS because they have to share the radio.
> 
> I'm not sure it should drop all the way to 15Mbps, though.  We haven't
> done a lot of throughput
> testing yet, but if we use two STA vifs on the ath9k box connected to an
> 80211n AP (trendnet),
> then we can set a max of about 9Mbps tx + rx across each STA (the STAs are
> sending to each other).
> That is around 40Mbps total tx + rx across the radio.
> 
> Thanks,
> Ben
> 
> -- 
> Ben Greear <greearb@candelatech.com>
> Candela Technologies Inc  http://www.candelatech.com
> 

-- 
Neu: GMX De-Mail - Einfach wie E-Mail, sicher wie ein Brief!  
Jetzt De-Mail-Adresse reservieren: http://portal.gmx.net/de/go/demail

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-09-24 14:53 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-09-24 14:53 UTC (permalink / raw)
  To: ath9k-devel

ath9k, I read.
The mac filtering has not implemented at ath9k or not?

I would like to know how it is about the status.

Any comments will be very appreciated of..
-
mason

--0016e68e92891791f80497724c8a
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

<div>From the openwrt site, mac address filtering has not implemented yet a=
t ath9k, I read.</div>
<div>The mac filtering has not implemented at ath9k or not? </div>
<div>=A0</div>
<div>I would like to know how it is about the status.</div>
<div>=A0</div>
<div>Any comments will be very appreciated of..</div>
<div>-</div>
<div>mason</div>
<div><br clear=3D"all"><br>=A0</div>

--0016e68e92891791f80497724c8a--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-09-24 14:53 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-09-24 14:53 UTC (permalink / raw)
  To: ath9k-devel

possible with the driver at this point.

As a side note, no, iwconfig should not be used for anything anymore.


//Peter

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-09-24 14:53 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-09-24 14:53 UTC (permalink / raw)
  To: ath9k-devel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-09-24 14:53 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-09-24 14:53 UTC (permalink / raw)
  To: ath9k-devel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-09-24 14:53 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-09-24 14:53 UTC (permalink / raw)
  To: ath9k-devel

when ath_draintxq() is called. From ath_draintxq() point of view that
looks like a bad idea (race between CPU and DMA).

Also, that looking around "cabq_depth =3D cabq->axq_depth;" looks very
peculiar. I believe it's correct (because nobody else puts anything
into this queue and we don't care if it's shorter later on when we
drain it) but I think it would be nice with a comment.

Any thoughts? I can whip up and test a patch if there are no objections.

/Bj=F6rn

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-09-24 14:53 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-09-24 14:53 UTC (permalink / raw)
  To: ath9k-devel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-09-24 14:53 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-09-24 14:53 UTC (permalink / raw)
  To: ath9k-devel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-09-24 14:53 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-09-24 14:53 UTC (permalink / raw)
  To: ath9k-devel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-09-09  3:33 tarek attia
  0 siblings, 0 replies; 335+ messages in thread
From: tarek attia @ 2010-09-09  3:33 UTC (permalink / raw)
  To: linux-arm-kernel

register

--
tarek

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-08-30  5:02 auto595907
  0 siblings, 0 replies; 335+ messages in thread
From: auto595907 @ 2010-08-30  5:02 UTC (permalink / raw)
  To: rjw; +Cc: linux-kernel

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16423
Subject		: netfilter/iptables stopped logging 2.6.35-rc
Submitter	: auto401300@hushmail.com
Date		: 2010-07-17 10:20 (44 days old)
Message-ID	: <20100717072036.1BBE52804B@smtp.hushmail.com>
References	: 
http://lkml.indiana.edu/hypermail/linux/kernel/1007.2/00440.html


this patch fixes the bug above:
(http://marc.info/?l=netfilter-devel&m=128116762801769&w=2)

fixed in 2.6.36-rc3


thanks


^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-08-23 14:32 auto595907
  0 siblings, 0 replies; 335+ messages in thread
From: auto595907 @ 2010-08-23 14:32 UTC (permalink / raw)
  To: maciej.rutecki; +Cc: netdev, linux-kernel

>I created a Bugzilla entry at 
>https://bugzilla.kernel.org/show_bug.cgi?id=16423
>for your bug report, please add your address to the CC list in 
>there, thanks!
>
>-- 
>Maciej Rutecki
>http://www.maciek.unixy.pl


this patch fixes the bug above
(http://marc.info/?l=netfilter-devel&m=128116762801769&w=2)


thanks.


^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-07-23 10:05 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-07-23 10:05 UTC (permalink / raw)
  To: ath9k-devel

mesh point. We have not yet figured out why the mesh interface is removed a=
nd reset to an interface of type NL80211_IFTYPE_STATION.

Regards
Abhijeet

-----Original Message-----
From: Luis R. Rodriguez [mailto:mcgrof at gmail.com]
Sent: Wednesday, July 28, 2010 9:23 PM
To: Abhijeet Chandran
Cc: ath9k-devel at lists.ath9k.org
Subject: Re: [ath9k-devel] ath9k mesh point not emitting beacons

On Wed, Jul 28, 2010 at 7:19 AM, Abhijeet Chandran <Abhijeet.Chandran@arice=
nt.com> wrote:
> Hi
> We have a problem that we have configured a  mesh point for the first
> time and  it  does not seem to start emitting beacons as soon as it comes=
 up.
> The card we are using is ath 9220
> We brought mesh point up , ex:
> # iw phy phy0 interface add mesh type mp mesh_id mymesh # ifconfig
> mesh up
>
> Through tracing in the kernel module mac80211  it appears that a
> callback function ieee80211_open is called with type mesh point as
> soon as the above commands are executed.
> However it  is immediately followed by the callback function
> ieee80211_stop (usually called when the mesh point is brought down) ,
> following which the meshpoint related sdata is flushed .
> Another question that we have is that do we need to enable scanning
> for the mesh point to emit beacons/probes?
>
> We have used the simulator mac80211_hwsim before  in which beacons are
> emitted as soon as the mesh point comes up.In the simulator don't need
> to start scanning on the mesh point.
> We'd really appreciate if somone can help us out here.

Known issue no one has yet looked into:

https://bugzilla.kernel.org/show_bug.cgi?id=3D14187

It should start beaconing if you issue a scan.

  Luis

"DISCLAIMER: This message is proprietary to Aricent and is intended solely =
for the use of the individual to whom it is addressed. It may contain privi=
leged or confidential information and should not be circulated or used for =
any purpose other than for what it is intended. If you have received this m=
essage in error, please notify the originator immediately. If you are not t=
he intended recipient, you are notified that you are strictly prohibited fr=
om using, copying, altering, or disclosing the contents of this message. Ar=
icent accepts no responsibility for loss or damage arising from the use of =
the information transmitted by this email including damage from virus."

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-06-24 13:48 Uwe Kleine-König
  0 siblings, 0 replies; 335+ messages in thread
From: Uwe Kleine-König @ 2010-06-24 13:48 UTC (permalink / raw)
  To: linux-arm-kernel

Hello,

this is the next step in the project "clean up the imx port" targeting
2.6.36.  The highlights this time are:

 - Unification of mach-mx2 and mach-mx1 into mach-imx
 - start allocating devices dynamically
   This should reduce the memory footprint because (in the end) no
   unused struct platform_device, struct resource or struct
   $platformdatafordriverX are kept in memory.  This also cleans up
   with naming conflicts.

This is intermixed with various fixes and simplifications.

I have to admit that some patches could have squashed but squashing them
now would be more work that it's worth so I kept them as they are now.

The patches are based on 67a3e12b05e055c0415c556a315a3d3eb637e29e

  Linux 2.6.35-rc1 (2010-05-30 13:21:02 -0700)

and are available in the git repository at:
  git://git.pengutronix.de/git/ukl/linux-2.6.git imx/for-2.6.36

plus sent as a reply to this mail.  Shortlog and diffstat are to be
found below.

Have fun
Uwe

Uwe Kleine-K?nig (61):
      ARM: mx3: rename mach-mx35pdk.c to mach-mx35_3ds.c matching its arch number
      ARM: mx25: rename mach-mx25pdk.c to mach-mx25_3ds.c matching its arch number
      ARM: mx1: don't use deprecated symbol names
      ARM: mx1/scb9328: fix type of uart1_mxc_exit to make compiler happy
      ARM: mx2/mx27_3ds: document alternative names and remove empty header
      ARM: imx: remove empty and unused board headers
      ARM: mx3/kzm_arm11_01: fold board header in its only user
      ARM: mx2/mx21ads: fold board header in its only user
      ARM: mx2/mx27ads: fold board header in its only user
      ARM: mx3/qong: get rid of nearly empty header
      ARM: mx3/mx31_3ds: fold board header in its only user
      ARM: mx3/mx31ads: fold board header in its only user
      ARM: mxc: grammar fix
      ARM: imx: rename mach dir for mx21 and mx27 to mach-imx
      ARM: imx/mx1: fold crm_regs.h into its only consumer
      ARM: imx: get rid of mxc_gpio_init
      ARM: imx: fold serial.c into devices.c
      ARM: imx1: rename imx_csi_device to match its .name
      ARM: imx1: rename imx_i2c_device to follow a common naming scheme
      ARM: imx1: rename imx_uart[12]_device to follow a common naming scheme
      ARM: mx3: mx31lilly: fix build error for !CONFIG_USB_ULPI
      ARM: imx: rename mxc_uart_devicex to follow a common naming scheme
      ARM: imx: move mx1 support to mach-imx
      ARM: imx: Kconfig: use an if block instead of a depend for many symbols
      ARM: imx: prepare deprecating ARCH_MX1, MACH_MX2, MACH_MX21 and MACH_MX27
      ARM: imx: prepare deprecating ARCH_MX1, MACH_MX2, MACH_MX21 and MACH_MX27
      ARM: imx: new Kconfig symbol and feature test macro for DMA on mx1 and mx2
      ARM: imx: new helper function imx_add_platform_device
      MTD: mxc_nand: make bit fields unsigned to please sparse
      ARM: imx: remove paragraphs with old address of the FSF
      ARM: mx25: remove paragraphs with old address of the FSF
      ARM: mx3: remove paragraphs with old address of the FSF
      ARM: mxc91231: remove paragraphs with old address of the FSF
      ARM: mxc: remove paragraphs with old address of the FSF
      ARM: imx: Change the way nand devices are registered (generic part)
      ARM: imx: Change the way nand devices are registered (imx21)
      ARM: imx: Change the way nand devices are registered (imx25)
      ARM: imx: Change the way nand devices are registered (imx27)
      ARM: imx: Change the way nand devices are registered (imx31)
      ARM: imx: Change the way nand devices are registered (imx35)
      ARM: imx: dynamically register imx-i2c devices (generic part)
      ARM: imx: dynamically register imx-i2c devices (imx1)
      ARM: imx: dynamically register imx-i2c devices (imx21)
      ARM: imx: dynamically register imx-i2c devices (imx25)
      ARM: imx: dynamically register imx-i2c devices (imx27)
      ARM: imx: dynamically register imx-i2c devices (imx31)
      ARM: imx: dynamically register imx-i2c devices (imx35)
      ARM: imx: dynamically register spi_imx devices (generic part)
      ARM: imx: dynamically register spi_imx devices (imx21)
      ARM: imx: dynamically register spi_imx devices (imx25)
      ARM: imx: dynamically register spi_imx devices (imx27)
      ARM: imx: dynamically register spi_imx devices (imx31)
      ARM: imx: dynamically register spi_imx devices (imx35)
      ARM: imx: dynamically register imx-uart devices (generic part)
      ARM: imx: dynamically register imx-uart devices (imx1)
      ARM: imx: dynamically register imx-uart devices (imx21)
      ARM: imx: dynamically register imx-uart devices (imx25)
      ARM: imx: dynamically register imx-uart devices (imx27)
      ARM: imx: dynamically register imx-uart devices (imx31)
      ARM: imx: dynamically register imx-uart devices (imx35)
      ARM: mx3: complement uart init routine with an exit routine

 arch/arm/Makefile                                  |    4 +-
 arch/arm/mach-imx/Kconfig                          |  186 +++++++++++
 arch/arm/{mach-mx2 => mach-imx}/Makefile           |   18 +-
 arch/arm/{mach-mx2 => mach-imx}/Makefile.boot      |    4 +
 .../{mach-mx1/clock.c => mach-imx/clock-imx1.c}    |   50 +++-
 .../clock_imx21.c => mach-imx/clock-imx21.c}       |    0
 .../clock_imx27.c => mach-imx/clock-imx27.c}       |    0
 .../{mach-mx2/cpu_imx27.c => mach-imx/cpu-imx27.c} |    0
 arch/arm/mach-imx/devices-imx1.h                   |   18 +
 arch/arm/mach-imx/devices-imx21.h                  |   30 ++
 arch/arm/mach-imx/devices-imx27.h                  |   38 +++
 arch/arm/{mach-mx2 => mach-imx}/devices.c          |  250 +++++++++------
 arch/arm/{mach-mx2 => mach-imx}/devices.h          |   30 +--
 .../{plat-mxc/dma-mx1-mx2.c => mach-imx/dma-v1.c}  |    4 +-
 .../eukrea_mbimx27-baseboard.c                     |   19 +-
 arch/arm/mach-imx/include/mach/dma-mx1-mx2.h       |   10 +
 .../include/mach/dma-v1.h}                         |   10 +-
 arch/arm/{mach-mx2 => mach-imx}/mach-cpuimx27.c    |   25 +-
 arch/arm/{mach-mx2 => mach-imx}/mach-imx27lite.c   |   11 +-
 arch/arm/{mach-mx1 => mach-imx}/mach-mx1ads.c      |   34 +-
 arch/arm/{mach-mx2 => mach-imx}/mach-mx21ads.c     |   58 +++-
 arch/arm/{mach-mx2 => mach-imx}/mach-mx27_3ds.c    |   17 +-
 arch/arm/{mach-mx2 => mach-imx}/mach-mx27ads.c     |   76 +++--
 arch/arm/{mach-mx2 => mach-imx}/mach-mxt_td60.c    |   36 +--
 arch/arm/{mach-mx2 => mach-imx}/mach-pca100.c      |   23 +-
 arch/arm/{mach-mx2 => mach-imx}/mach-pcm038.c      |   33 +--
 arch/arm/{mach-mx1 => mach-imx}/mach-scb9328.c     |   21 +-
 .../arm/{mach-mx1/generic.c => mach-imx/mm-imx1.c} |   23 +-
 arch/arm/{mach-mx2 => mach-imx}/mm-imx21.c         |    5 +-
 arch/arm/{mach-mx2 => mach-imx}/mm-imx27.c         |    5 +-
 .../ksym_mx1.c => mach-imx/mx1-camera-fiq-ksym.c}  |    0
 .../mx1_camera_fiq.S => mach-imx/mx1-camera-fiq.S} |    0
 arch/arm/{mach-mx2 => mach-imx}/pcm970-baseboard.c |    0
 arch/arm/mach-mx1/Kconfig                          |   19 -
 arch/arm/mach-mx1/Makefile                         |   15 -
 arch/arm/mach-mx1/Makefile.boot                    |    4 -
 arch/arm/mach-mx1/crm_regs.h                       |   55 ---
 arch/arm/mach-mx1/devices.c                        |  242 --------------
 arch/arm/mach-mx1/devices.h                        |    7 -
 arch/arm/mach-mx2/Kconfig                          |  116 -------
 arch/arm/mach-mx2/serial.c                         |  141 --------
 arch/arm/mach-mx25/Kconfig                         |    2 +
 arch/arm/mach-mx25/Makefile                        |    2 +-
 arch/arm/mach-mx25/devices-imx25.h                 |   38 +++
 arch/arm/mach-mx25/devices.c                       |  231 +-------------
 arch/arm/mach-mx25/devices.h                       |   12 -
 .../mach-mx25/{mach-mx25pdk.c => mach-mx25_3ds.c}  |   21 +-
 arch/arm/mach-mx25/mm.c                            |    7 +-
 arch/arm/mach-mx3/Kconfig                          |   26 ++
 arch/arm/mach-mx3/Makefile                         |    2 +-
 arch/arm/mach-mx3/devices-imx31.h                  |   38 +++
 arch/arm/mach-mx3/devices-imx35.h                  |   32 ++
 arch/arm/mach-mx3/devices.c                        |  247 +--------------
 arch/arm/mach-mx3/devices.h                        |   13 -
 arch/arm/mach-mx3/mach-armadillo5x0.c              |   17 +-
 arch/arm/mach-mx3/mach-kzm_arm11_01.c              |   31 ++-
 arch/arm/mach-mx3/mach-mx31_3ds.c                  |   64 +++--
 arch/arm/mach-mx3/mach-mx31ads.c                   |   55 +++-
 arch/arm/mach-mx3/mach-mx31lilly.c                 |   47 ++--
 arch/arm/mach-mx3/mach-mx31lite.c                  |   17 +-
 arch/arm/mach-mx3/mach-mx31moboard.c               |   50 ++--
 .../mach-mx3/{mach-mx35pdk.c => mach-mx35_3ds.c}   |   16 +-
 arch/arm/mach-mx3/mach-pcm037.c                    |   31 +-
 arch/arm/mach-mx3/mach-pcm037_eet.c                |    7 +-
 arch/arm/mach-mx3/mach-pcm043.c                    |   25 +-
 arch/arm/mach-mx3/mach-qong.c                      |   16 +-
 arch/arm/mach-mx3/mm.c                             |    7 +-
 arch/arm/mach-mx3/mx31lilly-db.c                   |   14 +-
 arch/arm/mach-mx3/mx31lite-db.c                    |   15 +-
 arch/arm/mach-mx3/mx31moboard-devboard.c           |   10 +-
 arch/arm/mach-mx3/mx31moboard-marxbot.c            |    4 -
 arch/arm/mach-mx3/mx31moboard-smartbot.c           |   11 +-
 arch/arm/mach-mx5/devices.c                        |    2 +-
 arch/arm/mach-mx5/mm.c                             |    3 +
 arch/arm/mach-mxc91231/crm_regs.h                  |    5 -
 arch/arm/mach-mxc91231/devices.c                   |    2 +-
 arch/arm/mach-mxc91231/mm.c                        |    8 +-
 arch/arm/plat-mxc/Kconfig                          |   10 +-
 arch/arm/plat-mxc/Makefile                         |    4 +-
 arch/arm/plat-mxc/audmux-v1.c                      |    4 -
 arch/arm/plat-mxc/audmux-v2.c                      |    4 -
 arch/arm/plat-mxc/devices.c                        |   33 ++
 arch/arm/plat-mxc/devices/Kconfig                  |   11 +
 arch/arm/plat-mxc/devices/Makefile                 |    4 +
 arch/arm/plat-mxc/devices/platform-imx-i2c.c       |   29 ++
 arch/arm/plat-mxc/devices/platform-imx-uart.c      |   60 ++++
 arch/arm/plat-mxc/devices/platform-mxc_nand.c      |   44 +++
 arch/arm/plat-mxc/devices/platform-spi_imx.c       |   30 ++
 arch/arm/plat-mxc/ehci.c                           |    4 -
 .../arm/plat-mxc/include/mach/board-armadillo5x0.h |   15 -
 .../plat-mxc/include/mach/board-eukrea_cpuimx27.h  |    2 +-
 arch/arm/plat-mxc/include/mach/board-kzmarm11.h    |   39 ---
 arch/arm/plat-mxc/include/mach/board-mx21ads.h     |   52 ---
 arch/arm/plat-mxc/include/mach/board-mx27ads.h     |  344 --------------------
 arch/arm/plat-mxc/include/mach/board-mx27lite.h    |   14 -
 arch/arm/plat-mxc/include/mach/board-mx27pdk.h     |   14 -
 arch/arm/plat-mxc/include/mach/board-mx31_3ds.h    |   59 ----
 arch/arm/plat-mxc/include/mach/board-mx31ads.h     |  117 -------
 arch/arm/plat-mxc/include/mach/board-mx31lilly.h   |    2 +-
 arch/arm/plat-mxc/include/mach/board-mx31lite.h    |    2 +-
 arch/arm/plat-mxc/include/mach/board-mx31moboard.h |    2 +-
 arch/arm/plat-mxc/include/mach/board-mx35pdk.h     |   22 --
 arch/arm/plat-mxc/include/mach/board-pcm037.h      |   22 --
 arch/arm/plat-mxc/include/mach/board-pcm038.h      |    2 +-
 arch/arm/plat-mxc/include/mach/board-pcm043.h      |   22 --
 arch/arm/plat-mxc/include/mach/board-qong.h        |   17 -
 arch/arm/plat-mxc/include/mach/devices-common.h    |   42 +++
 arch/arm/plat-mxc/include/mach/iomux-mxc91231.h    |    4 -
 arch/arm/plat-mxc/include/mach/mx1.h               |   28 +-
 arch/arm/plat-mxc/include/mach/mx25.h              |   28 ++-
 arch/arm/plat-mxc/include/mach/mx27.h              |    4 +-
 arch/arm/plat-mxc/include/mach/mx31.h              |    4 +-
 arch/arm/plat-mxc/include/mach/mx35.h              |    4 +-
 arch/arm/plat-mxc/include/mach/mx3_camera.h        |    4 -
 arch/arm/plat-mxc/include/mach/mxc91231.h          |    4 -
 arch/arm/plat-mxc/include/mach/mxc_nand.h          |    6 +-
 arch/arm/plat-mxc/include/mach/system.h            |    4 -
 arch/arm/plat-mxc/include/mach/timex.h             |    4 -
 arch/arm/plat-mxc/include/mach/uncompress.h        |    4 -
 arch/arm/plat-mxc/include/mach/vmalloc.h           |    4 -
 arch/arm/plat-mxc/irq.c                            |    3 -
 arch/arm/plat-mxc/system.c                         |    4 -
 arch/arm/plat-mxc/tzic.c                           |    2 -
 123 files changed, 1424 insertions(+), 2478 deletions(-)
 create mode 100644 arch/arm/mach-imx/Kconfig
 rename arch/arm/{mach-mx2 => mach-imx}/Makefile (55%)
 rename arch/arm/{mach-mx2 => mach-imx}/Makefile.boot (67%)
 rename arch/arm/{mach-mx1/clock.c => mach-imx/clock-imx1.c} (90%)
 rename arch/arm/{mach-mx2/clock_imx21.c => mach-imx/clock-imx21.c} (100%)
 rename arch/arm/{mach-mx2/clock_imx27.c => mach-imx/clock-imx27.c} (100%)
 rename arch/arm/{mach-mx2/cpu_imx27.c => mach-imx/cpu-imx27.c} (100%)
 create mode 100644 arch/arm/mach-imx/devices-imx1.h
 create mode 100644 arch/arm/mach-imx/devices-imx21.h
 create mode 100644 arch/arm/mach-imx/devices-imx27.h
 rename arch/arm/{mach-mx2 => mach-imx}/devices.c (73%)
 rename arch/arm/{mach-mx2 => mach-imx}/devices.h (54%)
 rename arch/arm/{plat-mxc/dma-mx1-mx2.c => mach-imx/dma-v1.c} (99%)
 rename arch/arm/{mach-mx2 => mach-imx}/eukrea_mbimx27-baseboard.c (93%)
 create mode 100644 arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
 rename arch/arm/{plat-mxc/include/mach/dma-mx1-mx2.h => mach-imx/include/mach/dma-v1.h} (93%)
 rename arch/arm/{mach-mx2 => mach-imx}/mach-cpuimx27.c (90%)
 rename arch/arm/{mach-mx2 => mach-imx}/mach-imx27lite.c (86%)
 rename arch/arm/{mach-mx1 => mach-imx}/mach-mx1ads.c (81%)
 rename arch/arm/{mach-mx2 => mach-imx}/mach-mx21ads.c (77%)
 rename arch/arm/{mach-mx2 => mach-imx}/mach-mx27_3ds.c (85%)
 rename arch/arm/{mach-mx2 => mach-imx}/mach-mx27ads.c (82%)
 rename arch/arm/{mach-mx2 => mach-imx}/mach-mxt_td60.c (86%)
 rename arch/arm/{mach-mx2 => mach-imx}/mach-pca100.c (93%)
 rename arch/arm/{mach-mx2 => mach-imx}/mach-pcm038.c (91%)
 rename arch/arm/{mach-mx1 => mach-imx}/mach-scb9328.c (89%)
 rename arch/arm/{mach-mx1/generic.c => mach-imx/mm-imx1.c} (68%)
 rename arch/arm/{mach-mx2 => mach-imx}/mm-imx21.c (95%)
 rename arch/arm/{mach-mx2 => mach-imx}/mm-imx27.c (95%)
 rename arch/arm/{mach-mx1/ksym_mx1.c => mach-imx/mx1-camera-fiq-ksym.c} (100%)
 rename arch/arm/{mach-mx1/mx1_camera_fiq.S => mach-imx/mx1-camera-fiq.S} (100%)
 rename arch/arm/{mach-mx2 => mach-imx}/pcm970-baseboard.c (100%)
 delete mode 100644 arch/arm/mach-mx1/Kconfig
 delete mode 100644 arch/arm/mach-mx1/Makefile
 delete mode 100644 arch/arm/mach-mx1/Makefile.boot
 delete mode 100644 arch/arm/mach-mx1/crm_regs.h
 delete mode 100644 arch/arm/mach-mx1/devices.c
 delete mode 100644 arch/arm/mach-mx1/devices.h
 delete mode 100644 arch/arm/mach-mx2/Kconfig
 delete mode 100644 arch/arm/mach-mx2/serial.c
 create mode 100644 arch/arm/mach-mx25/devices-imx25.h
 rename arch/arm/mach-mx25/{mach-mx25pdk.c => mach-mx25_3ds.c} (91%)
 create mode 100644 arch/arm/mach-mx3/devices-imx31.h
 create mode 100644 arch/arm/mach-mx3/devices-imx35.h
 rename arch/arm/mach-mx3/{mach-mx35pdk.c => mach-mx35_3ds.c} (89%)
 create mode 100644 arch/arm/plat-mxc/devices/Kconfig
 create mode 100644 arch/arm/plat-mxc/devices/Makefile
 create mode 100644 arch/arm/plat-mxc/devices/platform-imx-i2c.c
 create mode 100644 arch/arm/plat-mxc/devices/platform-imx-uart.c
 create mode 100644 arch/arm/plat-mxc/devices/platform-mxc_nand.c
 create mode 100644 arch/arm/plat-mxc/devices/platform-spi_imx.c
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-kzmarm11.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx21ads.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx27ads.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx27lite.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx27pdk.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx31ads.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx35pdk.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-pcm037.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-pcm043.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-qong.h
 create mode 100644 arch/arm/plat-mxc/include/mach/devices-common.h

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-06-07 17:58 Dave Hylands
  0 siblings, 0 replies; 335+ messages in thread
From: Dave Hylands @ 2010-06-07 17:58 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,

I'm trying to understand what I need to be concerned about with SMP
processors and sharing global data (in particular a dual Cortex-A9)

I'm familiar with spinlocks, but in this case I'm trying to work with
some lockless data structures.

What I'm not sure is whether the following would work. Suppose I have
a couple of 8-bit get/put indicies which are in adjacent memory
locations (within the same 32-bit word).

If I have an ISR and a thread running on an SMP core, and the ISR is
running on one core and the thread is running on a second core, if the
ISR were to only write to the put pointer and the thread were only to
write to the get pointer, does the cache maintain consistency? Or do
the get and put pointers need to be in separate cache lines?

Another way of asking this: If both cores are writing to the same
32-bit word (but different bytes) do the writes collide?

--
Dave Hylands
Shuswap, BC, Canada
http://www.DaveHylands.com/

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-05-18 10:38 Marek Szyprowski
  0 siblings, 0 replies; 335+ messages in thread
From: Marek Szyprowski @ 2010-05-18 10:38 UTC (permalink / raw)
  To: linux-arm-kernel

Hello,

This patch series perform a general cleanup in Samsung S5PC100 SoC support.
This chip is moved from custom s5pc1xx platform framework to new plat-s5p
framework, so more common code can be easily reused in upcomming extensions
for S5PV210/S5PC110 SoCs.

This patch series is prepared against next-samsung tree, with assumption
that the "[PATCH v3] ARM: S5PC100: Pre-requisite clock patch for
plat-s5pc1xx to plat-s5p" has been applied as well as the '[PATCH v6]
ARM: S5PV210: Add Ext interrupt support' (with additional bug fixes).

I've tried to split my changes as much as possible to clearly show how the
transition from plat-s5pc1xx to plat-s5p is being done.

Changes since v2:
- fixed some whitespace/tabs errors
- removed external interrupt code, a common code from plat-s5p will be used
- moved SMDKC100 fixes to separate patch series

Changes since v1:
- bases on completely new clock code provided by Kukjin Kim
- added some plat-s5p fixes required for transition
- removed custom functions from gpiolib implementation (now uses common
  code from plat-samsung)
- restructured the changes to avoid breaking the functionality beteen the
  patches
- some other minor cleanups (mainly c1xx to c100 renames)

This patch series includes:

[PATCH 01/11] drivers: serial: S5PC100 serial driver cleanup
[PATCH 02/11] ARM: S5PC100: Use common functions for gpiolib implementation
[PATCH 03/11] ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100
[PATCH 04/11] ARM: S5PC100: gpio.h cleanup
[PATCH 05/11] ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100
[PATCH 06/11] ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100
[PATCH 07/11] ARM: S5PC100: Move sdhci helpers from plat-s5pc1xx to mach-s5pc100
[PATCH 08/11] ARM: Samsung: move S5PC100 support from plat-s5pc1xx to plat-s5p framework
[PATCH 09/11] ARM: S5PC100: Add support for gpio interrupt
[PATCH 10/11] ARM: S5PC100: use common plat-s5p external interrupt code
[PATCH 11/11] ARM: remove obsolete plat-s5pc1xx directory

Best regards
--
Marek Szyprowski
Samsung Poland R&D Center

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-04-17 21:43 nelakurthi koteswararao
  0 siblings, 0 replies; 335+ messages in thread
From: nelakurthi koteswararao @ 2010-04-17 21:43 UTC (permalink / raw)
  To: linux-arm-kernel

http://ColleenKitts2530.co.cc

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-03-25 17:02 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-03-25 17:02 UTC (permalink / raw)
  To: ath9k-devel

the production level yet, although my chipset is AR9160.

One issue is after a long time running the traffic maybe stopped
occasionally. Another one is it seems have some compatibility issue
with Intel chipset. They have troubled me a lot.

-Daniel

2010/5/6 Alan <lameventanas@gmail.com>:
> Can anybody give me a status report on the current state of ath9k?
> I know the one shipped with kernel 2.6.33.2 is working without major
> issues with 802.11g because I'm using it.
> But what is the status of 802.11n?
> What is the status of multiple ssids? Can I configure more than one in
> master mode?
>
> I'm asking because I'm about to set up an AP to be considered
> production level, and having 802.11n and two ssids (one open for
> guests, one encrypted for intended users) would be great.
> Should I stick to the version provided with the current kernel or
> should I use compat-wireless?
> Should I wait for the next kernel to be released with a major
> breakthrough in ath9k? (judging by the mailing list activity, it seems
> so).
> Hardware is AR5008 (dual band, 3 antennas).
>
> Thanks a lot!
>
> Alan
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-03-25 17:02 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2010-03-25 17:02 UTC (permalink / raw)
  To: ath9k-devel

different behaviour and if the ls and error message were done on the same
machine the file is actually there.
I have not read the code, so I am more speculating, but could some other error
in the firmware loading be falsely evaluated as fw not found?

-Stefan

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2010-02-25  9:36 Thomas Weber
  0 siblings, 0 replies; 335+ messages in thread
From: Thomas Weber @ 2010-02-25  9:36 UTC (permalink / raw)
  To: linux-arm-kernel

Subject: [PATCH/RFC] OMAP2: serial.c: Fix number of uarts in early_init

The omap_serial_early_init prints the following errors:

Could not get uart4_ick
Could not get uart4_fck

because all the uarts available in omap_uart[] will be initialized.
Only omap4430 and omap3630 have 4 uarts at the moment.
This patch reduces the number of uarts when cpu is not omap4430 or
omap3630.

Signed-off-by: Thomas Weber <weber@corscience.de>
---
 arch/arm/mach-omap2/serial.c |   15 ++++++++++-----
 1 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index b79bc89..da77930 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -644,16 +644,21 @@ static void serial_out_override(struct uart_port *up, int offset, int value)
 }
 void __init omap_serial_early_init(void)
 {
-	int i;
+	int i, nr_ports;
 	char name[16];
 
+	if (!(cpu_is_omap3630() || cpu_is_omap4430()))
+		nr_ports = 3;
+	else
+		nr_ports = ARRAY_SIZE(omap_uart);
+
 	/*
 	 * Make sure the serial ports are muxed on at this point.
 	 * You have to mux them off in device drivers later on
 	 * if not needed.
 	 */
 
-	for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
+	for (i = 0; i < nr_ports; i++) {
 		struct omap_uart_state *uart = &omap_uart[i];
 		struct platform_device *pdev = &uart->pdev;
 		struct device *dev = &pdev->dev;
@@ -669,17 +674,17 @@ void __init omap_serial_early_init(void)
 			continue;
 		}
 
-		sprintf(name, "uart%d_ick", i+1);
+		sprintf(name, "uart%d_ick", i + 1);
 		uart->ick = clk_get(NULL, name);
 		if (IS_ERR(uart->ick)) {
-			printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
+			printk(KERN_ERR "Could not get uart%d_ick\n", i + 1);
 			uart->ick = NULL;
 		}
 
 		sprintf(name, "uart%d_fck", i+1);
 		uart->fck = clk_get(NULL, name);
 		if (IS_ERR(uart->fck)) {
-			printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
+			printk(KERN_ERR "Could not get uart%d_fck\n", i + 1);
 			uart->fck = NULL;
 		}
 
-- 
1.6.4.4

^ permalink raw reply related	[flat|nested] 335+ messages in thread
* No subject
@ 2009-11-19 13:58 Vimal Singh
  0 siblings, 0 replies; 335+ messages in thread
From: Vimal Singh @ 2009-11-19 13:58 UTC (permalink / raw)
  To: linux-mtd

This patch series adds flash support for NAND (in sdp, zoom and ldp),
OneNAND and NOR (in sdp)

Tested on Zoom2 and 3430SDP

Vimal Singh (4):
[PATCH-v6 1/4] OMAP2/3: Add support for flash on SDP boards
[PATCH-v6 2/4] OMAP3: Add support for NAND on ZOOM/LDP boards
[PATCH-v6 3/4] OMAP: Zoom2: Enable NAND and JFFS2 support in defconfig
[PATCH-v6 4/4] OMAP: 3430SDP: Enable NAND in defconfig


v6 :
1. Implemented Tony's comments on below threads:

[PATCH-v5 1/4] OMAP2/3: Add support for flash on SDP boards
http://marc.info/?l=linux-omap&m=125805845217778&w=2

[PATCH-v5 2/4] OMAP3: Add support for NAND on ZOOM2/LDP boards
http://marc.info/?l=linux-omap&m=125805867318269&w=2

[PATCH 2/3]NAND: OMAP: Fixing omap nand driver, compiled as module
http://marc.info/?l=linux-omap&m=125787938923028&w=2

2. Creating 'mach-omap2/gpmc-nand.c' to handle GPMC related setups for
the driver.
3. Removed all 'gpmc_cs_read_reg' and 'gpmc_cs_write_reg' calls from
'nand/omap2.c'
4. Corrected macro 'GPMC_CONFIG1_DEVICETYPE_NAND' for NAND
5. Removed 'nand unlock' routine in patch 2/4, will take this
discussion to mtd list.

v4-v5:
[PATCH-v5 1/4] OMAP2/3: Add support for flash on SDP boards:
Implemented Tony's comments.

-- 
Regards,
Vimal Singh

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2009-09-17  9:37 Marc Kleine-Budde
  0 siblings, 0 replies; 335+ messages in thread
From: Marc Kleine-Budde @ 2009-09-17  9:37 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,

This patch series adds support for the Atmel CAN controller as found
on the AT91SAM9263.

It adds the at91_can to the generic device definition, activates the CAN
controller on the at91sam9263ek and adds the driver itself.

Changes since V1:
- let Kconfig depend on CAN_DEV
- add example how driver is used in baord file

Please review and consider for inclusion.

cheers, Marc

Marc Kleine-Budde (3):
      at91sam9263: add at91_can device to generic device definition
      at91sam9263ek: activate at91 CAN controller
      at91_can: add driver for Atmel's CAN controller on AT91SAM9263

 arch/arm/mach-at91/at91sam9263_devices.c |   36 +
 arch/arm/mach-at91/board-sam9263ek.c     |   19 +
 arch/arm/mach-at91/include/mach/board.h  |    6 +
 drivers/net/can/Kconfig                  |    6 +
 drivers/net/can/Makefile                 |    1 +
 drivers/net/can/at91_can.c               | 1186 ++++++++++++++++++++++++++++++
 6 files changed, 1254 insertions(+), 0 deletions(-)
 create mode 100644 drivers/net/can/at91_can.c

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2009-09-07 14:07 Somshekar ChandrashekarKadam
  0 siblings, 0 replies; 335+ messages in thread
From: Somshekar ChandrashekarKadam @ 2009-09-07 14:07 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Catalin Marinas,

I am working on ARM1176 Realview board.
Kernel stable arm 2.6.28

My first query

I think reboot command is not implemented. ?

Work done locally here.

Implemented reboot by setting  8th bit of SYS_RESETCTL (reset control register 0x10000040). It works fine when given command reboot.

Issue Faced

ASLA works fine when done hard poweroff and poweron. ALSA detected properly and works fine.When I do a soft reboot using reboot command.  when kernel boots up it doesn't detect ALSA device itself with the
following messages. It is not able to read AC97 Register failing
because of timeout. I tried increasing the timeout and udelay still the
same case. Messages are shown below a the end.I also tried setting the various depth of a soft reset like 
(1=SYSRST rest logic tile, 2=PLLLOCK reset PLL, 4=PBRESET board reset,
same as pressing reset button). still ALSA does not work.Now I am confused on this. Please throw some light on this or any pointer will be useful.It is not able to read AC97 Register failing
because of timeout. routine (/*
 * Read an AC'97 register.
 */
static unsigned short aaci_ac97_read(struct snd_ac97 *ac97, unsigned short reg)) 
I hope i have made myself clear. 
Thanks In Advance

Messages when ALSA not detected

====================================================

When sound doesn't work I see following in boot log:

Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: wrong ac97 register read back (0 != 7c)
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: wrong ac97 register read back (0 != 7e)
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: wrong ac97 register read back (0 != 7c)
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: wrong ac97 register read back (0 != 7e)
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: wrong ac97 register read back (0 != 1c)
port 1 high speed
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: wrong ac97 register read back (0 != 7c)
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: wrong ac97 register read back (0 != 7e)
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: wrong ac97 register read back (0 != 1c)
usb 1-1: new high speed USB device using isp1760 and address 2
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: ac97 read back fail.  retry
aaci-pl041 fpga:04: wrong ac97 register read back 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20090907/092b9ae9/attachment-0001.htm>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2009-08-25 10:34 Syed Rafiuddin
  0 siblings, 0 replies; 335+ messages in thread
From: Syed Rafiuddin @ 2009-08-25 10:34 UTC (permalink / raw)
  To: linux-arm-kernel

From: Syed Rafiuddin <rafiuddin.syed@ti.com>

This patch Adds Keypad support on OMAP4.And adds
OMAP4 register addresses and configures them for OMAP4.


This patch has been updated as per the comments received from
Trilok Soni to remove GPIO based omap2 keypad logic from omap_keypad.c
(http://www.mail-archive.com/linux-omap at vger.kernel.org/msg14570.html)
Matrix_keypad.c (gpio based keypad driver) can be used in OMAP2,
which is not tested on OMAP2 since unavailability of omap2 target's.


Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
---
 drivers/input/keyboard/omap-keypad.c |  247 ++++++++++++++++-------------------
 1 files changed, 115 insertions(+), 132 deletions(-)

Index: kernel-omap4-base/drivers/input/keyboard/omap-keypad.c
===================================================================
--- kernel-omap4-base.orig/drivers/input/keyboard/omap-keypad.c	2009-08-19 12:23:14.000000000 +0530
+++ kernel-omap4-base/drivers/input/keyboard/omap-keypad.c	2009-08-19 18:25:17.000000000 +0530
@@ -44,6 +44,36 @@

 #undef NEW_BOARD_LEARNING_MODE

+#define OMAP4_KBDOCP_BASE              0x4A31C000
+#define OMAP4_KBD_REVISION             0x00
+#define OMAP4_KBD_SYSCONFIG            0x10
+#define OMAP4_KBD_SYSSTATUS            0x14
+#define OMAP4_KBD_IRQSTATUS            0x18
+#define OMAP4_KBD_IRQENABLE            0x1C
+#define OMAP4_KBD_WAKEUPENABLE         0x20
+#define OMAP4_KBD_PENDING              0x24
+#define OMAP4_KBD_CTRL                 0x28
+#define OMAP4_KBD_DEBOUNCINGTIME       0x2C
+#define OMAP4_KBD_LONGKEYTIME          0x30
+#define OMAP4_KBD_TIMEOUT              0x34
+#define OMAP4_KBD_STATEMACHINE         0x38
+#define OMAP4_KBD_ROWINPUTS            0x3C
+#define OMAP4_KBD_COLUMNOUTPUTS                0x40
+#define OMAP4_KBD_FULLCODE31_0         0x44
+#define OMAP4_KBD_FULLCODE63_32                0x48
+
+#define OMAP4_KBD_SYSCONFIG_SOFTRST    (1 << 1)
+#define OMAP4_KBD_SYSCONFIG_ENAWKUP    (1 << 2)
+#define OMAP4_KBD_IRQENABLE_EVENTEN    (1 << 0)
+#define OMAP4_KBD_IRQENABLE_LONGKEY    (1 << 1)
+#define OMAP4_KBD_IRQENABLE_TIMEOUTEN  (1 << 2)
+#define OMAP4_KBD_CTRL_NOSOFTMODE      (1 << 1)
+#define OMAP4_KBD_CTRLPTVVALUE         (1 << 2)
+#define OMAP4_KBD_CTRLPTV              (1 << 1)
+#define OMAP4_KBD_IRQDISABLE           0x00
+
+#define OMAP4_KBD_IRQSTATUSDISABLE     0xffff
+
 static void omap_kp_tasklet(unsigned long);
 static void omap_kp_timer(unsigned long);

@@ -65,55 +95,16 @@ struct omap_kp {
 static DECLARE_TASKLET_DISABLED(kp_tasklet, omap_kp_tasklet, 0);

 static int *keymap;
-static unsigned int *row_gpios;
-static unsigned int *col_gpios;
-
-#ifdef CONFIG_ARCH_OMAP2
-static void set_col_gpio_val(struct omap_kp *omap_kp, u8 value)
-{
-	int col;
-
-	for (col = 0; col < omap_kp->cols; col++)
-		gpio_set_value(col_gpios[col], value & (1 << col));
-}
-
-static u8 get_row_gpio_val(struct omap_kp *omap_kp)
-{
-	int row;
-	u8 value = 0;
-
-	for (row = 0; row < omap_kp->rows; row++) {
-		if (gpio_get_value(row_gpios[row]))
-			value |= (1 << row);
-	}
-	return value;
-}
-#else
-#define		set_col_gpio_val(x, y)	do {} while (0)
-#define		get_row_gpio_val(x)	0
-#endif

 static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
 {
-	struct omap_kp *omap_kp = dev_id;
+	if (cpu_is_omap44xx()) {
+		/* disable keyboard interrupt and schedule for handling */
+		omap_writel(OMAP4_KBD_IRQDISABLE, OMAP4_KBDOCP_BASE +
+			OMAP4_KBD_IRQENABLE);

-	/* disable keyboard interrupt and schedule for handling */
-	if (cpu_is_omap24xx()) {
-		int i;
-
-		for (i = 0; i < omap_kp->rows; i++) {
-			int gpio_irq = gpio_to_irq(row_gpios[i]);
-			/*
-			 * The interrupt which we're currently handling should
-			 * be disabled _nosync() to avoid deadlocks waiting
-			 * for this handler to complete.  All others should
-			 * be disabled the regular way for SMP safety.
-			 */
-			if (gpio_irq == irq)
-				disable_irq_nosync(gpio_irq);
-			else
-				disable_irq(gpio_irq);
-		}
+		omap_writel(omap_readl(OMAP4_KBDOCP_BASE + OMAP4_KBD_IRQSTATUS),
+			OMAP4_KBDOCP_BASE + OMAP4_KBD_IRQSTATUS);
 	} else
 		/* disable keyboard interrupt and schedule for handling */
 		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
@@ -132,14 +123,13 @@ static void omap_kp_scan_keypad(struct o
 {
 	int col = 0;

+	u32 *p = (u32 *) state;
 	/* read the keypad status */
-	if (cpu_is_omap24xx()) {
-		/* read the keypad status */
-		for (col = 0; col < omap_kp->cols; col++) {
-			set_col_gpio_val(omap_kp, ~(1 << col));
-			state[col] = ~(get_row_gpio_val(omap_kp)) & 0xff;
-		}
-		set_col_gpio_val(omap_kp, 0);
+	if (cpu_is_omap44xx()) {
+
+		*p = omap_readl(OMAP4_KBDOCP_BASE + OMAP4_KBD_FULLCODE31_0);
+		*(p + 1) = omap_readl(OMAP4_KBDOCP_BASE +
+					OMAP4_KBD_FULLCODE63_32);

 	} else {
 		/* disable keyboard interrupt and schedule for handling */
@@ -198,7 +188,13 @@ static void omap_kp_tasklet(unsigned lon
 			       row, (new_state[col] & (1 << row)) ?
 			       "pressed" : "released");
 #else
-			key = omap_kp_find_key(col, row);
+
+			/* Keymappings have changed in omap4.*/
+			if (cpu_is_omap44xx())
+				key = omap_kp_find_key(row, col);
+			else
+				key = omap_kp_find_key(col, row);
+
 			if (key < 0) {
 				printk(KERN_WARNING
 				      "omap-keypad: Spurious key event %d-%d\n",
@@ -213,8 +209,16 @@ static void omap_kp_tasklet(unsigned lon
 				continue;

 			kp_cur_group = key & GROUP_MASK;
-			input_report_key(omap_kp_data->input, key & ~GROUP_MASK,
-					 new_state[col] & (1 << row));
+
+			if (cpu_is_omap44xx())
+				input_report_key(omap_kp_data->input,
+					key & ~GROUP_MASK, new_state[row]
+						& (1 << col));
+			else
+				input_report_key(omap_kp_data->input,
+					key & ~GROUP_MASK, new_state[col]
+						& (1 << row));
+
 #endif
 		}
 	}
@@ -229,14 +233,18 @@ static void omap_kp_tasklet(unsigned lon
 		mod_timer(&omap_kp_data->timer, jiffies + delay);
 	} else {
 		/* enable interrupts */
-		if (cpu_is_omap24xx()) {
-			int i;
-			for (i = 0; i < omap_kp_data->rows; i++)
-				enable_irq(gpio_to_irq(row_gpios[i]));
-		} else {
-			omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+		if (cpu_is_omap44xx()) {
+			omap_writew(OMAP4_KBD_IRQENABLE_EVENTEN |
+				OMAP4_KBD_IRQENABLE_LONGKEY,
+					OMAP4_KBDOCP_BASE +
+					OMAP4_KBD_IRQENABLE);
 			kp_cur_group = -1;
-		}
+		} else {
+			omap_writew(0, OMAP_MPUIO_BASE +
+				OMAP_MPUIO_KBD_MASKIT);
+				kp_cur_group = -1;
+			}
+
 	}
 }

@@ -296,7 +304,7 @@ static int __devinit omap_kp_probe(struc
 	struct omap_kp *omap_kp;
 	struct input_dev *input_dev;
 	struct omap_kp_platform_data *pdata =  pdev->dev.platform_data;
-	int i, col_idx, row_idx, irq_idx, ret;
+	int i, col_idx, row_idx, ret;

 	if (!pdata->rows || !pdata->cols || !pdata->keymap) {
 		printk(KERN_ERR "No rows, cols or keymap from pdata\n");
@@ -316,7 +324,7 @@ static int __devinit omap_kp_probe(struc
 	omap_kp->input = input_dev;

 	/* Disable the interrupt for the MPUIO keyboard */
-	if (!cpu_is_omap24xx())
+	if (!cpu_is_omap44xx())
 		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);

 	keymap = pdata->keymap;
@@ -327,39 +335,11 @@ static int __devinit omap_kp_probe(struc
 	if (pdata->delay)
 		omap_kp->delay = pdata->delay;

-	if (pdata->row_gpios && pdata->col_gpios) {
-		row_gpios = pdata->row_gpios;
-		col_gpios = pdata->col_gpios;
-	}
-
 	omap_kp->rows = pdata->rows;
 	omap_kp->cols = pdata->cols;

-	if (cpu_is_omap24xx()) {
-		/* Cols: outputs */
-		for (col_idx = 0; col_idx < omap_kp->cols; col_idx++) {
-			if (gpio_request(col_gpios[col_idx], "omap_kp_col") < 0) {
-				printk(KERN_ERR "Failed to request"
-				       "GPIO%d for keypad\n",
-				       col_gpios[col_idx]);
-				goto err1;
-			}
-			gpio_direction_output(col_gpios[col_idx], 0);
-		}
-		/* Rows: inputs */
-		for (row_idx = 0; row_idx < omap_kp->rows; row_idx++) {
-			if (gpio_request(row_gpios[row_idx], "omap_kp_row") < 0) {
-				printk(KERN_ERR "Failed to request"
-				       "GPIO%d for keypad\n",
-				       row_gpios[row_idx]);
-				goto err2;
-			}
-			gpio_direction_input(row_gpios[row_idx]);
-		}
-	} else {
-		col_idx = 0;
-		row_idx = 0;
-	}
+	col_idx = 0;
+	row_idx = 0;

 	setup_timer(&omap_kp->timer, omap_kp_timer, (unsigned long)omap_kp);

@@ -369,7 +349,7 @@ static int __devinit omap_kp_probe(struc

 	ret = device_create_file(&pdev->dev, &dev_attr_enable);
 	if (ret < 0)
-		goto err2;
+		goto err1;

 	/* setup input device */
 	__set_bit(EV_KEY, input_dev->evbit);
@@ -387,47 +367,54 @@ static int __devinit omap_kp_probe(struc
 	ret = input_register_device(omap_kp->input);
 	if (ret < 0) {
 		printk(KERN_ERR "Unable to register omap-keypad input device\n");
-		goto err3;
+		goto err2;
 	}

-	if (pdata->dbounce)
-		omap_writew(0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING);
+	if (pdata->dbounce) {
+		if (cpu_is_omap44xx())
+			omap_writew(0xff, OMAP_MPUIO_BASE +
+				OMAP4_KBD_DEBOUNCINGTIME);
+		else
+			omap_writew(0xff, OMAP_MPUIO_BASE +
+				OMAP_MPUIO_GPIO_DEBOUNCING);
+	}

 	/* scan current status and enable interrupt */
 	omap_kp_scan_keypad(omap_kp, keypad_state);
-	if (!cpu_is_omap24xx()) {
-		omap_kp->irq = platform_get_irq(pdev, 0);
-		if (omap_kp->irq >= 0) {
-			if (request_irq(omap_kp->irq, omap_kp_interrupt, 0,
-					"omap-keypad", omap_kp) < 0)
-				goto err4;
-		}
+
+	/* Configuring OMAP4 keypad registers */
+	if (cpu_is_omap44xx()) {
+		omap_writew(OMAP4_KBD_SYSCONFIG_SOFTRST |
+			OMAP4_KBD_SYSCONFIG_ENAWKUP, OMAP4_KBDOCP_BASE
+				+ OMAP4_KBD_SYSCONFIG);
+		omap_writew((OMAP4_KBD_CTRLPTVVALUE << OMAP4_KBD_CTRLPTV) |
+			OMAP4_KBD_CTRL_NOSOFTMODE,
+				OMAP4_KBDOCP_BASE + OMAP4_KBD_CTRL);
+	}
+
+	omap_kp->irq = platform_get_irq(pdev, 0);
+
+	if (omap_kp->irq >= 0) {
+		if (request_irq(omap_kp->irq, omap_kp_interrupt, 0,
+				"omap-keypad", omap_kp) < 0)
+			goto err3;
+	}
+
+	if (!cpu_is_omap44xx())
 		omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
-	} else {
-		for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) {
-			if (request_irq(gpio_to_irq(row_gpios[irq_idx]),
-					omap_kp_interrupt,
-					IRQF_TRIGGER_FALLING,
-					"omap-keypad", omap_kp) < 0)
-				goto err5;
-		}
+
+	if (cpu_is_omap44xx()) {
+		omap_writew(OMAP4_KBD_IRQENABLE_EVENTEN |
+			OMAP4_KBD_IRQENABLE_LONGKEY, OMAP4_KBDOCP_BASE +
+				OMAP4_KBD_IRQENABLE);
 	}
 	return 0;
-err5:
-	for (i = irq_idx - 1; i >=0; i--)
-		free_irq(row_gpios[i], 0);
-err4:
+err3:
 	input_unregister_device(omap_kp->input);
 	input_dev = NULL;
-err3:
-	device_remove_file(&pdev->dev, &dev_attr_enable);
 err2:
-	for (i = row_idx - 1; i >=0; i--)
-		gpio_free(row_gpios[i]);
+	device_remove_file(&pdev->dev, &dev_attr_enable);
 err1:
-	for (i = col_idx - 1; i >=0; i--)
-		gpio_free(col_gpios[i]);
-
 	kfree(omap_kp);
 	input_free_device(input_dev);

@@ -440,14 +427,10 @@ static int __devexit omap_kp_remove(stru

 	/* disable keypad interrupt handling */
 	tasklet_disable(&kp_tasklet);
-	if (cpu_is_omap24xx()) {
-		int i;
-		for (i = 0; i < omap_kp->cols; i++)
-			gpio_free(col_gpios[i]);
-		for (i = 0; i < omap_kp->rows; i++) {
-			gpio_free(row_gpios[i]);
-			free_irq(gpio_to_irq(row_gpios[i]), 0);
-		}
+	if (cpu_is_omap44xx()) {
+		omap_writel(OMAP4_KBD_IRQDISABLE, OMAP4_KBDOCP_BASE +
+			OMAP4_KBD_IRQENABLE);
+		free_irq(omap_kp->irq, 0);
 	} else {
 		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 		free_irq(omap_kp->irq, 0);

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2009-02-27 19:01 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2009-02-27 19:01 UTC (permalink / raw)
  To: ath9k-devel

(usually link quality warries between 60-70)


Machine started to suffer with disconnects.

Below is fuller log.
1249488753.366831: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
1249488753.366985: wlan0 (phy #0): disconnected (local request)
1249488848.660029: wlan0 (phy #0): auth 00:1e:58:b4:f6:83 ->
00:22:b0:bc:1e:1e status: 0: Successful
1249488848.668387: wlan0 (phy #0): assoc 00:1e:58:b4:f6:83 ->
00:22:b0:bc:1e:1e status: 0: Successful
1249488848.668489: wlan0 (phy #0): connected to 00:1e:58:b4:f6:83
1249488918.365949: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
1249488918.365996: wlan0 (phy #0): disconnected (local request)
1249489968.542997: wlan0 (phy #0): auth 00:1e:58:b4:f6:83 ->
00:22:b0:bc:1e:1e status: 0: Successful
1249489968.551472: wlan0 (phy #0): assoc 00:1e:58:b4:f6:83 ->
00:22:b0:bc:1e:1e status: 0: Successful
1249489968.551576: wlan0 (phy #0): connected to 00:1e:58:b4:f6:83
1249489985.366774: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
1249489985.366850: wlan0 (phy #0): disconnected (local request)
1249490017.023313: wlan0 (phy #0): auth 00:1e:58:b4:f6:83 ->
00:22:b0:bc:1e:1e status: 0: Successful
1249490017.031578: wlan0 (phy #0): assoc 00:1e:58:b4:f6:83 ->
00:22:b0:bc:1e:1e status: 0: Successful
1249490017.031616: wlan0 (phy #0): connected to 00:1e:58:b4:f6:83
1249490039.365052: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
1249490039.365096: wlan0 (phy #0): disconnected (local request)

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2009-02-27 19:01 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2009-02-27 19:01 UTC (permalink / raw)
  To: ath9k-devel

required. You can think of my previous phrase as possible feature
request, or a question of "how to?" type. I know that borh SLI nvidia
cards are sharing IRQ 16 as well as atheros based dlink wireless card.
(if it's not difficult, please look into my previous emails, they will
have dmesg and lspci -vv details, otherwise just ask me for more
details, i shall provide them)
>>  Obviously, there is not much point of asking Nvidia to do it, since
>> those behemoth's won't do anything for sure, since their current driver
>> (i dont use it for that matter)release is pretty banged up...
>>     
>
> If you do most of the work finding how to work around the problem, and
> it turns out that something could be improved in free software, then
> maybe your patch will be applied.
>
> If you expect others to question you about the symptoms, then suggest
> patches and push them to the kernel, that's not going to happen.
>   
Symptoms are simple with nvidia module and ath9k loaded at the same time
connection degrades over short period of time and after several minutes
disappears all together. I suspect it could be IRQ sharing or other I/O
or similar hardware conflict, since both of them work pretty well while
other devices driver is not loaded. no unusual messages in dmesg.
Machine may hang and even if in terminal(not in X), machine hangs
completely without providing a bit of information, not even oops message.
>   
>> Another question, my Access Point and PCI wifi card are from same
>> manufacturer. AP is set to B,G,N auto mode, but my card only connects to
>> it using G mode, which is not why i bought it in the first place. Why is
>> this happening? i am pretty much only user to network myself 99% of
>> time. i tried to force it to use N mode, it could detect it, but it
>> couldn't connect.
>>     
>
> I suggest that you actually show what commands you run and what they
> return, not just your interpretation.
>
> In case you are hitting the stuck scan bug, try setting the channel with
> iwconfig instead of loading and unloading modules.
>
>   
Commands are simple as well.
ip link set wlan0 up
iwconfig wlan0 essid dlink
they don't give any errors and don't show any unusual messages in dmesg

thats pretty much it. (no wireless security used at all)

N.B.
What i really don't want is any kind of aggression towards to me.
Coding something for a community, even advanced one requires certain
amount of tolerance, as ANY normal communication.
I am not perfect tester(i just attempt to become better one), i
understand that, but i am not coming after difficult day, working with
difficult people to submit difficult issues(which other people may
prefer to ignore all together or for those reasons abandon Linux and go
to MS products, i have seeing enough of those). I am not going to become
more enthusiastic by being referred to "RTFM noob" like documents, who
nearly imply my stupidity.
So far I was very happy in this list, and even my lack of technical
knowledge did not spoil my attitude towards this list. I want it to stay
that way. Ignoring problems of people who lack technical knowledge on
matter is path to nowhere. I seriously, don't want to start flame wars,
i am not naive and I don't ask for apologies. I just ask one thing,
please be tolerant, everyone can have a shi*** day, that includes you
and me!

Dmitri

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2009-02-27 19:01 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2009-02-27 19:01 UTC (permalink / raw)
  To: ath9k-devel

is=20
yet, but I wonder if anyone else has solved this with a vendor extension?

--=20
Tim Smith <Tim.Smith@csr.com>


Member of the CSR plc group of companies. CSR plc registered in England and=
 Wales, registered number 4187346, registered office Churchill House, Cambr=
idge Business Park, Cowley Road, Cambridge, CB4 0WZ, United Kingdom

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2009-02-27 19:01 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2009-02-27 19:01 UTC (permalink / raw)
  To: ath9k-devel

rev. 2.1 now), a single function device may _only_ provide an interrupt
request on pin A and no others.  Pins B-D only have meaning for multi-
function devices.

> > There seems to be some kind of race.  If I have both the AR5416 and 
> > HPT371N, loaded, and after the board has booted(everything is 
> > configured), the "IRQ X  Nobody cared" never occurs.   If i remove 
> > AR5416 mini-pci,  I also never get the "IRQ X  Nobody cared".
> 
> You would have to investigate a) which chip generates the bogus IRQ,
> and b) how to clear it. Then you can clear the IRQ in the platform code,
> or using a PCI quirk code if it's not related to the platform.

It sounds to me like the driver is prodding the chip, and it's generating
an interrupt but the driver hasn't yet registered its handler.  If so,
that's really a driver bug needing to be fixed.

Normally you get a backtrace when a "nobody cared" message is issued -
this should tell you which driver is probably the cause.

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2009-02-27 19:01 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2009-02-27 19:01 UTC (permalink / raw)
  To: ath9k-devel

wlan0: STA 00:23:4d:b7:98:e8 IEEE 802.11: authenticated
MGMT
mgmt::assoc_req
association request: STA=00:23:4d:b7:98:e8 capab_info=0x431 listen_interval=10
handle_assoc STA 00:23:4d:b7:98:e8 - no HT, num of non-HT stations 1
hostapd_ht_operation_update current operation mode=0x0
hostapd_ht_operation_update new operation mode=0x13 changes=2
  new AID 1
wlan0: STA 00:23:4d:b7:98:e8 IEEE 802.11: association OK (aid 1)

This is weird, since it chooses non-HT mode for the STA.
Am not sure why this is happening. Are you running the latest git
code for all 3 cases ?

* hostapd
* ath9k - AP side
* ath9k - STA side

Also, can you paste your hostapd.conf and wpa_supplicant's configuration file here ?

Sujith

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2009-02-27 19:01 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2009-02-27 19:01 UTC (permalink / raw)
  To: ath9k-devel

  // ?? nice pointer arithmetic... should use PTR_ALIGN here?
  off = ((unsigned long) skb->data) % sc->cachelsz;
  if (off != 0)
      skb_reserve(skb, sc->cachelsz);

in other words, when we allocate, round up to the next cache line
greater than IEEE80211_MAX_LEN, then add an extra cache_line-1
bytes so we can map starting from it.

dev_alloc_skb already does some padding and alignment, and it's
configurable on a per-arch basis (though looks like only powerpc
sets it to L1 cache size, everywhere else it's 32 bytes.)

I guess if someone is bored some benchmarking would be useful.

-- 
Bob Copeland %% www.bobcopeland.com

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2009-02-27 19:01 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2009-02-27 19:01 UTC (permalink / raw)
  To: ath9k-devel

should be automagically functional on the kernel I'm on, assuming the
hardware is compatible?

So that's where I stand now. I'm probably not asking the right
questions or providing enough information - please let me know any
tests you'd like me to run or further information I can give.

Thanks!

Andrew

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2009-02-15  8:49 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2009-02-15  8:49 UTC (permalink / raw)
  To: ath9k-devel

am not sure if this is related to AP mode in ath9k.

Sujith

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2009-01-04 17:33 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2009-01-04 17:33 UTC (permalink / raw)
  To: ath9k-devel

802.11n chips. Is any one has ath9k or similar driver for linux 2.6.21? I
saw the ath9k driver in 2.6.28. It is higly dependent on linux 2.6.28
kernel. Anyone has PCI/PCIe driver supporting any 802.11n chips for 2.6.21?

any sugestions welcome!!

thanks,
MB.

--000e0cd15718164b2c0462176409
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

<div>Hi All,</div>
<div>&nbsp;</div>
<div>From Linux 2.6.28 onwards ath9k driver is part of the linux and suppor=
ts 802.11n chips. Is any one has ath9k or similar driver for linux 2.6.21? =
I saw the ath9k driver in 2.6.28. It is higly dependent on linux 2.6.28 ker=
nel. Anyone has PCI/PCIe driver supporting any 802.11n chips for 2.6.21?</d=
iv>

<div>&nbsp;</div>
<div>any sugestions welcome!!</div>
<div>&nbsp;</div>
<div>thanks,</div>
<div>MB.</div>

--000e0cd15718164b2c0462176409--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2009-01-04 17:33 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2009-01-04 17:33 UTC (permalink / raw)
  To: ath9k-devel

---------------------------------------------------------------------------=
------------------------
Reason Meaning
0	Reserved
1	Unspecified reason
2	Previous authentication no longer valid
3	Deauthenticated because sending STA is leaving (or has left) IBSS or ESS
4	Disassociated due to inactivity
5	Disassociated because AP is unable to handle all currently associated STA=
s
6	Class 2 frame received from nonauthenticated STA
7	Class 3 frame received from nonassociated STA
8	Disassociated because sending STA is leaving (or has left) BSS
9	STA requesting (re)association is not authenticated with responding STA
10	Disassociated because the information in the Power Capability element is=
 unacceptable
11	Disassociated because the information in the Supported Channels element =
is unacceptable
12	Reserved
13	Invalid information element, i.e., an information element defined in thi=
s standard for
	which the content does not meet the specifications in Clause 7
14	Message integrity code (MIC) failure
15	4-Way Handshake timeout
16	Group Key Handshake timeout
17	Information element in 4-Way Handshake different from (Re)Association Re=
quest/Probe
	Response/Beacon frame
18	Invalid group cipher
19	Invalid pairwise cipher
20	Invalid AKMP
21	Unsupported RSN information element version
22	Invalid RSN information element capabilities
23	IEEE 802.1X authentication failed
24	Cipher suite rejected because of the security policy
25=E2=80=9331	Reserved
32	Disassociated for unspecified, QoS-related reason
33	Disassociated because QoS AP lacks sufficient bandwidth for this QoS STA
34	Disassociated because excessive number of frames need to be acknowledged=
, but are not
	acknowledged due to AP transmissions and/or poor channel conditions
35	Disassociated because STA is transmitting outside the limits of its TXOP=
s
36	Requested from peer STA as the STA is leaving the BSS (or resetting)
37	Requested from peer STA as it does not want to use the mechanism
38	Requested from peer STA as the STA received frames using the mechanism f=
or which a
	setup is required
39	Requested from peer STA due to timeout
45	Peer STA does not support the requested cipher suite
46=E2=80=9365	Reserved
535	Reserved
---------------------------------------------------------------------------=
------------------------

> Jan 30 23:31:37 ws1 dhcpcd[23630]: wlan0: carrier lost
> Jan 30 23:31:37 ws1 wpa_cli: interface wlan0 DISCONNECTED
> Jan 30 23:31:38 ws1 [ 9444.502016] wlan0: associate with AP f51a5ea8
> Jan 30 23:31:38 ws1 dhcpcd[23630]: wlan0: received SIGTERM, stopping
> Jan 30 23:31:38 ws1 [ 9444.703019] wlan0: associate with AP f51a5ea8
> Jan 30 23:31:38 ws1 [ 9444.902015] wlan0: associate with AP f51a5ea8
> Jan 30 23:31:39 ws1 [ 9445.102013] wlan0: association with AP f51a5ea8 ti=
med out
> Jan 30 23:31:40 ws1 [ 9445.990865] wlan0: authenticate with AP f51a5ea8
> Jan 30 23:31:40 ws1 [ 9445.998616] wlan0: authenticate with AP f51a5ea8
> Jan 30 23:31:40 ws1 [ 9446.000416] wlan0: authenticated
> Jan 30 23:31:40 ws1 [ 9446.000421] wlan0: associate with AP f51a5ea8
> Jan 30 23:31:40 ws1 [ 9446.003209] wlan0: RX AssocResp from f029002a (cap=
ab=3D0x411 status=3D0 aid=3D2)
> Jan 30 23:31:40 ws1 [ 9446.003214] wlan0: associated
> Jan 30 23:31:40 ws1 wpa_cli: interface wlan0 CONNECTED
> Jan 30 23:31:41 ws1 dhcpcd[24556]: wlan0: dhcpcd 4.0.7 starting
> Jan 30 23:31:41 ws1 dhcpcd[24556]: wlan0: broadcasting for a lease
> Jan 30 23:31:42 ws1 dhcpcd[24556]: wlan0: offered 192.168.1.100 from 192.=
168.1.1
> Jan 30 23:31:42 ws1 dhcpcd[24556]: wlan0: checking 192.168.1.100 is avail=
able on attached networks
> Jan 30 23:31:47 ws1 dhcpcd[24556]: wlan0: acknowledged 192.168.1.100 from=
 192.168.1.1

Yeap everything looks good except your AP doesn't seem to like you to be id=
le
for more than 8 minutes, that is if no traffic was going on in between your
dhcp negotiation and your disassoc.

> Used Hardware :
> My Router: Linksys WRT 160v2 Standard: 80211N. maybe a broadcom Chip
> My Wlan Card: Linksys WMP 300N v2 Standard: 80211N. AR5416 Chip
>=20
> But at all it works. Today i have set the router that he only uses the 80=
211N Standard and it works with my Wireless Card.

I don't see any issues above. Please see:

http://wireless.kernel.org/en/users/Documentation/Reporting_bugs

> !!!!!!!!!!!!!!Big Thanks for your great drivers and packages!!!!!!!!!!!!!=
!
>=20
> Well night
>=20
> kind regards
>=20
> Alexander Bartha

  Luis

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-12-07 21:22 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-12-07 21:22 UTC (permalink / raw)
  To: buildroot

Author: ulf <ulf@69ca8d6d-28ef-0310-b511-8ec308f3f277>
Date:   Thu Aug 16 21:54:48 2007 +0000

    Add further documentation for BSP patch

I'm also not completely happy about that section.

 Thomas> Is the author of this section on the list ? If so, could he
 Thomas> mention what the intention was ?

He posted on the list a few days ago.

--=20
Bye, Peter Korsgaard

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-11-21  1:22 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-11-21  1:22 UTC (permalink / raw)
  To: buildroot

	DEPMOD=$(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26

And 4 lines further down this is even used directly.
This tool is pulled through this dependency:

linux26-modules: cross-depmod26 $(LINUX26_DIR)/.modules_installed

And this cross-depmod26 is provided by module-init-tools.


Nicolas

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-10-23 17:17 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-10-23 17:17 UTC (permalink / raw)
  To: buildroot

config BR2_TARGET_ROOTFS_EXT2_BLOCKS
        int "size in blocks (leave at 0 for auto calculation)"
        depends on BR2_TARGET_ROOTFS_EXT2
        default 0

config BR2_TARGET_ROOTFS_EXT2_INODES
        int "inodes (leave at 0 for auto calculation)"
        depends on BR2_TARGET_ROOTFS_EXT2
        default 0

 Adam> Strangely, when I mount/chroot into one of the pre-built root
 Adam> filesystems available from the uclibc website, I can create files
 Adam> without any problems.

The really old ones? They were afaik padded to 128MB.

-- 
Bye, Peter Korsgaard

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-10-23 17:17 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-10-23 17:17 UTC (permalink / raw)
  To: buildroot

build 3.7x, so I have so far just fixed the 3.61 URL.

-- 
Bye, Peter Korsgaard

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-10-23 17:17 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-10-23 17:17 UTC (permalink / raw)
  To: buildroot

at91sam9260ek		MACH_AT91SAM9260EK	AT91SAM9260EK
1099

It appears you have the 9G20 suppost in u-boot but still have a kernel
for the 9260.

Hartley

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-10-14 11:50 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-10-14 11:50 UTC (permalink / raw)
  To: ath9k-devel

computer) I get a stable stream at >4MBps.

Eirik

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-10-14 11:50 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-10-14 11:50 UTC (permalink / raw)
  To: ath9k-devel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-10-14 11:50 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-10-14 11:50 UTC (permalink / raw)
  To: ath9k-devel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-10-14 11:50 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-10-14 11:50 UTC (permalink / raw)
  To: ath9k-devel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-10-14 11:50 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-10-14 11:50 UTC (permalink / raw)
  To: ath9k-devel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-10-14 11:50 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-10-14 11:50 UTC (permalink / raw)
  To: ath9k-devel

how can i else monitor the problem?

On Mon, 13 Oct 2008 15:14:37 -0700
"Luis R. Rodriguez" <mcgrof@gmail.com> wrote:

> On Sat, Oct 11, 2008 at 6:46 AM, Alexander Petukhov <al_petukhov@mail.ru> wrote:
> > Hello,
> >
> > first of all - many thanks to you guys for developing this driver!
> > i'm owning D-Link DWA-547 card (Atheros Communications Inc. AR5416 802.11abgn Wireless PCI Adapter (rev 01)), and i'm on Debian Lenny\Sid.
> > My current kernel is 2.6.27 released not long ago, and i have one problem - connection periodicly losts, i.e. i can't even ping router i'm associated with. After some time (5-40 seconds) all becomes fine again. This happents one time for an hour or so on. Interface is not down when this problem occures, gnome applet shows it is up and have a normal(~90%) signal strength. Now i'm using wpa on router and wpasupplicant package on debian box(without any network-managers), but this still happents even without any encryption used.
> > Would be glad to help in testing.
> 
> Can you do this:
> 
> sudo dmesg -c > /dev/null
> 
> Then connect to the AP, every now and then do this:
> 
> sudo dmesg -c | tee log
> 
> Keep doing this routinely, it'll keep overwriting the data from the
> kernel ring buffer to the log but you will also be able to see it on
> the screen. Once you see the strange disconnect issue appear please
> play more careful attention to what comes up and send us the log. To
> be safe you can just use 'tee -a' to append to the log all the
> information.
> 
> Anyway please send us the log.
> 
>   Luis
> 


-- 
Best regards,
Alexander Petukhov <al_petukhov@mail.ru>

--Multipart=_Wed__15_Oct_2008_01_31_40_+0400_4IyuS81Mmz9KfB9=
Content-Type: application/octet-stream;
 name="log"
Content-Disposition: attachment;
 filename="log"
Content-Transfer-Encoding: base64
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--Multipart=_Wed__15_Oct_2008_01_31_40_+0400_4IyuS81Mmz9KfB9=--

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-10-14 11:50 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-10-14 11:50 UTC (permalink / raw)
  To: ath9k-devel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-10-14 11:50 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-10-14 11:50 UTC (permalink / raw)
  To: ath9k-devel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-10-14 11:50 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-10-14 11:50 UTC (permalink / raw)
  To: ath9k-devel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-10-14 11:50 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-10-14 11:50 UTC (permalink / raw)
  To: ath9k-devel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-10-14 11:50 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-10-14 11:50 UTC (permalink / raw)
  To: ath9k-devel



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-09-15 17:22 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-09-15 17:22 UTC (permalink / raw)
  To: buildroot

>>>>>>>
And add uClibc-0.9.29-cygwin_host_loadlibes.patch
for solved identical problem during build uClibc 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
10-24-07 08:28  AndyI          New Issue                                    
10-24-07 08:28  AndyI          Status                   new => assigned     
10-24-07 08:28  AndyI          Assigned To               => buildroot       
10-24-07 08:28  AndyI          File Added: fix_cygwin_HOST_LOADLIBES.patch      
             
10-24-07 08:28  AndyI          File Added:
uClibc-0.9.29-cygwin_host_loadlibes.patch                    
10-24-07 08:29  AndyI          Issue Monitored: AndyI                       
09-17-08 05:42  AndyI          Note Added: 0011544                          
======================================================================

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-09-15 17:22 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-09-15 17:22 UTC (permalink / raw)
  To: buildroot

>>>>>>>
And add uClibc-0.9.29-cygwin_host_loadlibes.patch
for solved identical problem during build uClibc 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
10-24-07 08:28  AndyI          New Issue                                    
10-24-07 08:28  AndyI          Status                   new => assigned     
10-24-07 08:28  AndyI          Assigned To               => buildroot       
10-24-07 08:28  AndyI          File Added: fix_cygwin_HOST_LOADLIBES.patch      
             
10-24-07 08:28  AndyI          File Added:
uClibc-0.9.29-cygwin_host_loadlibes.patch                    
10-24-07 08:29  AndyI          Issue Monitored: AndyI                       
09-17-08 05:42  AndyI          Note Added: 0011544                          
09-17-08 06:30  bernhardf      Status                   assigned => closed  
======================================================================

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-07-28  4:41 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-07-28  4:41 UTC (permalink / raw)
  To: ath9k-devel

Connectivtiy is lost after Group rekeying is done. The keytype
maintained by ath9k is reset when group key is updated. Though
sc_keytype can be reset only for broadcast key the proper fix
would be to use mac80211 provided key type from txinfo during
xmit and get rid of sc_keytype from ath9k ath_softc.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
---
 drivers/net/wireless/ath9k/core.h |    1 -
 drivers/net/wireless/ath9k/main.c |    3 ---
 drivers/net/wireless/ath9k/xmit.c |    6 +++---
 3 files changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k=
/core.h
index b66de29..e8ccbe4 100644
--- a/drivers/net/wireless/ath9k/core.h
+++ b/drivers/net/wireless/ath9k/core.h
@@ -976,7 +976,6 @@ struct ath_softc {
        u32 sc_keymax;          /* size of key cache */
        DECLARE_BITMAP(sc_keymap, ATH_KEYMAX);  /* key use bit map */
        u8 sc_splitmic;         /* split TKIP MIC keys */
-       int sc_keytype;

        /* RX */
        struct list_head sc_rxbuf;
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k=
/main.c
index 1ba1800..aca893a 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -204,8 +204,6 @@ static int ath_key_config(struct ath_softc *sc,
        if (!ret)
                return -EIO;

-       if (mac)
-               sc->sc_keytype =3D hk.kv_type;
        return 0;
 }

@@ -1507,7 +1505,6 @@ static int ath9k_set_key(struct ieee80211_hw *hw,
        case DISABLE_KEY:
                ath_key_delete(sc, key);
                clear_bit(key->keyidx, sc->sc_keymap);
-               sc->sc_keytype =3D ATH9K_CIPHER_CLR;
                break;
        default:
                ret =3D -EINVAL;
diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k=
/xmit.c
index 3fc6641..2592905 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -239,11 +239,11 @@ static int ath_tx_prepare(struct ath_softc *sc,
                txctl->keyix =3D tx_info->control.hw_key->hw_key_idx;
                txctl->frmlen +=3D tx_info->control.icv_len;

-               if (sc->sc_keytype =3D=3D ATH9K_CIPHER_WEP)
+               if (tx_info->control.hw_key->alg =3D=3D ALG_WEP)
                        txctl->keytype =3D ATH9K_KEY_TYPE_WEP;
-               else if (sc->sc_keytype =3D=3D ATH9K_CIPHER_TKIP)
+               else if (tx_info->control.hw_key->alg =3D=3D ALG_TKIP)
                        txctl->keytype =3D ATH9K_KEY_TYPE_TKIP;
-               else if (sc->sc_keytype =3D=3D ATH9K_CIPHER_AES_CCM)
+               else if (tx_info->control.hw_key->alg =3D=3D ALG_CCMP)
                        txctl->keytype =3D ATH9K_KEY_TYPE_AES;
        }

--
1.5.5



--opJtzjQTFsWo+cga
Content-Type: text/x-diff; charset="us-ascii"
Content-Disposition: attachment; filename="connectivity.patch"

^ permalink raw reply related	[flat|nested] 335+ messages in thread
* No subject
@ 2008-07-14 13:16 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-07-14 13:16 UTC (permalink / raw)
  To: buildroot

make[1]: Entering directory
`/media/EkstraDisk/buildroot/build_i686/dnsmasq-2.41'
cd src && /usr/bin/make \
 DBUS_MINOR=" `echo -DNO_IPV6 | ../bld/pkg-wrapper pkg-config --modversion
dbus-1 | nawk -F . -- '{ if ($(NF-1)) print \"-DDBUS_MINOR=\"$(NF-1) }'`" 
\
 DBUS_CFLAGS="`echo -DNO_IPV6 | ../bld/pkg-wrapper pkg-config --cflags
dbus-1`"  \
 DBUS_LIBS="  `echo -DNO_IPV6 | ../bld/pkg-wrapper pkg-config --libs
dbus-1`"  \
 SUNOS_LIBS=" `if uname | grep SunOS 2>&1 >/dev/null; then echo -lsocket
-lnsl -lposix4; fi `" \
 SUNOS_VER="  `if uname | grep SunOS 2>&1 >/dev/null; then uname -r | nawk
-F . -- '{ print \"-DSUNOS_VER=\"$2 }'; fi`" \
 -f ../bld/Makefile dnsmasq 
/bin/sh: line 1: nawk: command not found

Don't you have nawk installed? On my system, nawk is a link to gawk.

Seems like we don't currently check for awk in dependencies.sh, will fix 

---------------------------------------------------------------------- 
 jacmet - 06-18-08 06:17  
---------------------------------------------------------------------- 
I have now added an awk check to dependencies.sh and forced dnsmasq to use
awk rather than nawk, so closing issue. 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
06-14-08 17:01  KHAksnes       New Issue                                    
06-14-08 17:01  KHAksnes       Status                   new => assigned     
06-14-08 17:01  KHAksnes       Assigned To               => buildroot       
06-15-08 13:40  jacmet         Note Added: 0008264                          
06-15-08 14:07  KHAksnes       Note Added: 0008274                          
06-15-08 14:08  KHAksnes       File Added: compilelog                       
06-18-08 06:06  jacmet         Note Added: 0008384                          
06-18-08 06:17  jacmet         Status                   assigned => resolved
06-18-08 06:17  jacmet         Resolution               open => fixed       
06-18-08 06:17  jacmet         Note Added: 0008394                          
07-16-08 08:02  bernhardf      Status                   resolved => new     
07-17-08 03:39  bernhardf      Status                   new => closed       
======================================================================

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-07-14 13:16 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-07-14 13:16 UTC (permalink / raw)
  To: buildroot

PrBoom is a version of Doom using the Simple Direct Media
layer (SDL) library, which enables it to use XFree86, OpenGL,
Linux framebuffer console, GGI, SVGALib or even color or
monochrome text consoles as display. There is an additional
OpenGL renderer as well.
-- 
Bye, Peter Korsgaard

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-07-14 13:16 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-07-14 13:16 UTC (permalink / raw)
  To: buildroot

Modified:
   trunk/buildroot/package/config/lex.zconf.c_shipped
   trunk/buildroot/package/config/zconf.l


Changeset:
Modified: trunk/buildroot/package/config/lex.zconf.c_shipped
===================================================================
--- trunk/buildroot/package/config/lex.zconf.c_shipped	2008-08-27 15:06:41 UTC (rev 23246)
+++ trunk/buildroot/package/config/lex.zconf.c_shipped	2008-08-27 20:18:33 UTC (rev 23247)
@@ -815,6 +815,11 @@
 void append_string(const char *str, int size)
 {
 	int new_size = text_size + size + 1;
+	if (size > 70) {
+		fprintf (stderr, "%s:%d warning: Overlong line\n",
+		current_file->name, current_file->lineno);
+	}
+
 	if (new_size > text_asize) {
 		new_size += START_STRSIZE - 1;
 		new_size &= -START_STRSIZE;

Modified: trunk/buildroot/package/config/zconf.l
===================================================================
--- trunk/buildroot/package/config/zconf.l	2008-08-27 15:06:41 UTC (rev 23246)
+++ trunk/buildroot/package/config/zconf.l	2008-08-27 20:18:33 UTC (rev 23247)
@@ -49,6 +49,10 @@
 void append_string(const char *str, int size)
 {
 	int new_size = text_size + size + 1;
+	if (size > 70) {
+	        fprintf (stderr, "%s:%d warning: Overlong line\n",
+			 current_file->name, current_file->lineno);
+	}
 	if (new_size > text_asize) {
 		new_size += START_STRSIZE - 1;
 		new_size &= -START_STRSIZE;

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-07-14 13:16 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-07-14 13:16 UTC (permalink / raw)
  To: buildroot

ttymxc0 device. If so, then the reason why you cannot login is that
you don't have ttymxc0 listed in /etc/securetty.

The file comes from target/generic/target_skeleton/etc, but you can
simply edit it under project_build_arm/uclibc/root/etc and rerun make
to regenerate your filesystem image.

I don't see any mention of /dev/ttymxcN in Documentation/devices.txt
in the kernel sources? I take it that the serial driver isn't in the
mainline kernel?

 > THe other thing I tried to do was pass init=/dev/sh and
 > init=/dev/bash to try to get a direct shell prompt. I don't think
 > it was connecting to the MX31's serial port because I never saw any
 > outputs after the filesystem was mounted. Is there a recommended
 > way to force /dev/sh to appear on a ttyS0 (or actually ttymxc0 for
 > the MX31)

I take it you mean /bin/sh not /dev/sh?

Strange. And you do get output from init and login with the same
filesystem if you boot without init=/bin/sh?

-- 
Bye, Peter Korsgaard

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-04-23 14:39 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-04-23 14:39 UTC (permalink / raw)
  To: buildroot


Modified:
   trunk/buildroot/package/config/Makefile.kconfig
   trunk/buildroot/package/config/README.buildroot2
   trunk/buildroot/package/config/conf.c
   trunk/buildroot/package/config/confdata.c
   trunk/buildroot/package/config/kconfig-language.txt
   trunk/buildroot/package/config/kconfig-to-buildroot2.patch
   trunk/buildroot/package/config/lex.zconf.c_shipped
   trunk/buildroot/package/config/mconf.c
   trunk/buildroot/package/config/qconf.cc
   trunk/buildroot/package/config/util.c
   trunk/buildroot/package/config/zconf.gperf
   trunk/buildroot/package/config/zconf.hash.c_shipped
   trunk/buildroot/package/config/zconf.tab.c_shipped
   trunk/buildroot/package/config/zconf.y


Changeset:

Sorry, the patch is too large to include (4155 lines).
Please use ViewCVS to see it!

http://uclibc.org/cgi-bin/viewcvs.cgi?view=3Drev&root=3Dsvn&rev=3D22451
_______________________________________________
buildroot mailing list
buildroot at uclibc.org
http://busybox.net/mailman/listinfo/buildroot

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-04-23 14:39 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-04-23 14:39 UTC (permalink / raw)
  To: buildroot


Modified:
   trunk/buildroot/Makefile
   trunk/buildroot/package/config/Makefile


Changeset:
Modified: trunk/buildroot/Makefile
===================================================================
--- trunk/buildroot/Makefile	2008-06-19 07:24:59 UTC (rev 22448)
+++ trunk/buildroot/Makefile	2008-06-19 08:11:35 UTC (rev 22449)
@@ -170,6 +170,8 @@
 HOST_EXEEXT:=.exe
 HOST_LIBEXT:=.lib
 HOST_SHREXT:=.dll
+HOST_LOADLIBES="-lcurses -lintl"
+export HOST_LOADLIBES
 endif
 ifneq ($(findstring mingw,$(BR2_GNU_BUILD_SUFFIX)),)
 HOST_EXEEXT:=.exe

Modified: trunk/buildroot/package/config/Makefile
===================================================================
--- trunk/buildroot/package/config/Makefile	2008-06-19 07:24:59 UTC (rev 22448)
+++ trunk/buildroot/package/config/Makefile	2008-06-19 08:11:35 UTC (rev 22449)
@@ -17,10 +17,10 @@
 host-cobjs := $(sort $(foreach m,$(__hostprogs),$($(m)-objs)))
 
 $(host-csingle): %: %.c
-	$(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTCFLAGS) $(HOSTCFLAGS_$@) $(HOST_LOADLIBES) $< -o $@
+	$(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTCFLAGS) $(HOSTCFLAGS_$@) $< $(HOST_LOADLIBES) -o $@
 
 $(host-cmulti): %: $(host-cobjs) $(host-cshlib)
-	$(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTCFLAGS) $(HOSTCFLAGS_$@) $(HOST_LOADLIBES) $($@-objs) -o $@
+	$(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTCFLAGS) $(HOSTCFLAGS_$@) $($@-objs) $(HOST_LOADLIBES) -o $@
 
 $(host-cobjs): %.o: %.c
 	$(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTCFLAGS) $(HOSTCFLAGS_$@) -c $< -o $@

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-04-23 14:39 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-04-23 14:39 UTC (permalink / raw)
  To: buildroot

0x40000930  0x40003f50  Yes
/home/osingla/buildroot-9260/buildroot/build_arm/staging_dir/lib/ld-uClibc.so.0
0x40011dd0  0x40018380  Yes
/home/osingla/buildroot-9260/buildroot/build_arm/staging_dir/lib/libpthread.so.0
0x40033800  0x40071e60  Yes
/home/osingla/buildroot-9260/buildroot/build_arm/staging_dir/lib/libc.so.0
(gdb) q
~$

When the thread has been created, it is not visible from the debugger.
It runs, but I can't put a breakpoint.
A few notes:

- I do not like the message "warning: Remote failure reply: E01", it
might mean that gdb host and gdbserver are not in sync for whatever
reason.

- If I put a breakpoint on the thread function, before 'cont', the
program terminates as soon the thread is created.

- the shared library 'thread_db' is not loaded (I think it should):
# cat /proc/2298/maps
00008000-00009000 r-xp 00000000 00:0c 4339       /tmp/test
00010000-00011000 rw-p 00000000 00:0c 4339       /tmp/test
00011000-00012000 rwxp 00011000 00:00 0          [heap]
40000000-40005000 r-xp 00000000 00:01 398        /lib/ld-uClibc-0.9.29.so
40005000-40006000 rw-p 40005000 00:00 0
4000c000-4000d000 r--p 00004000 00:01 398        /lib/ld-uClibc-0.9.29.so
4000d000-4000e000 rw-p 00005000 00:01 398        /lib/ld-uClibc-0.9.29.so
4000e000-40019000 r-xp 00000000 00:01 406        /lib/libpthread-0.9.29.so
40019000-40020000 ---p 40019000 00:00 0
40020000-40021000 r--p 0000a000 00:01 406        /lib/libpthread-0.9.29.so
40021000-40026000 rw-p 0000b000 00:01 406        /lib/libpthread-0.9.29.so
40026000-40028000 rw-p 40026000 00:00 0
40028000-400b5000 r-xp 00000000 00:01 414        /lib/libuClibc-0.9.29.so
400b5000-400bc000 ---p 400b5000 00:00 0
400bc000-400bd000 r--p 0008c000 00:01 414        /lib/libuClibc-0.9.29.so
400bd000-400be000 rw-p 0008d000 00:01 414        /lib/libuClibc-0.9.29.so
400be000-400c3000 rw-p 400be000 00:00 0
bebde000-bebf3000 rwxp befeb000 00:00 0          [stack]

I used linuxthreads (stable/old), and I checked 'pthreads debugging
support ' within uclibc menuconfig.

Any idea what I am missing?

TIA,
~Olivier

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-04-23 14:39 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-04-23 14:39 UTC (permalink / raw)
  To: buildroot


Modified:
   trunk/buildroot/package/config/Makefile.kconfig
   trunk/buildroot/package/config/README.buildroot2
   trunk/buildroot/package/config/conf.c
   trunk/buildroot/package/config/confdata.c
   trunk/buildroot/package/config/expr.h
   trunk/buildroot/package/config/gconf.c
   trunk/buildroot/package/config/kconfig-language.txt
   trunk/buildroot/package/config/kconfig-to-buildroot2.patch
   trunk/buildroot/package/config/kxgettext.c
   trunk/buildroot/package/config/lkc_proto.h
   trunk/buildroot/package/config/lxdialog/check-lxdialog.sh
   trunk/buildroot/package/config/mconf.c
   trunk/buildroot/package/config/menu.c
   trunk/buildroot/package/config/qconf.cc
   trunk/buildroot/package/config/zconf.tab.c_shipped
   trunk/buildroot/package/config/zconf.y


Changeset:
Modified: trunk/buildroot/package/config/Makefile.kconfig
===================================================================
--- trunk/buildroot/package/config/Makefile.kconfig	2008-06-19 08:11:35 UTC (rev 22449)
+++ trunk/buildroot/package/config/Makefile.kconfig	2008-06-19 08:11:43 UTC (rev 22450)
@@ -22,24 +22,25 @@
 silentoldconfig: $(obj)/conf
 	$< -s arch/$(ARCH)/Kconfig
 
+# Create new linux.po file
+# Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files
+# The symlink is used to repair a deficiency in arch/um
 update-po-config: $(obj)/kxgettext
-	xgettext --default-domain=linux \
-          --add-comments --keyword=_ --keyword=N_ \
-          --files-from=scripts/kconfig/POTFILES.in \
-          --output scripts/kconfig/config.pot
-	$(Q)ln -fs Kconfig_i386 arch/um/Kconfig_arch
-	$(Q)for i in `ls arch/`; \
-	do \
-	  scripts/kconfig/kxgettext arch/$$i/Kconfig \
-	    | msguniq -o scripts/kconfig/linux_$${i}.pot; \
-	done
-	$(Q)msgcat scripts/kconfig/config.pot \
-	  `find scripts/kconfig/ -type f -name linux_*.pot` \
-	  --output scripts/kconfig/linux_raw.pot
-	$(Q)msguniq --sort-by-file scripts/kconfig/linux_raw.pot \
-	    --output scripts/kconfig/linux.pot
-	$(Q)rm -f arch/um/Kconfig_arch
-	$(Q)rm -f scripts/kconfig/linux_*.pot scripts/kconfig/config.pot
+	xgettext --default-domain=linux                  \
+	    --add-comments --keyword=_ --keyword=N_      \
+	    --from-code=UTF-8                            \
+	    --files-from=scripts/kconfig/POTFILES.in     \
+	    --output $(obj)/config.pot
+	$(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot
+	$(Q)ln -fs Kconfig.i386 arch/um/Kconfig.arch
+	(for i in `ls arch/`;                            \
+	do                                               \
+	    $(obj)/kxgettext arch/$$i/Kconfig;           \
+	done ) >> $(obj)/config.pot
+	msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \
+	    --output $(obj)/linux.pot
+	$(Q)rm -f arch/um/Kconfig.arch
+	$(Q)rm -f $(obj)/config.pot
 
 PHONY += randconfig allyesconfig allnoconfig allmodconfig defconfig
 

Modified: trunk/buildroot/package/config/README.buildroot2
===================================================================
--- trunk/buildroot/package/config/README.buildroot2	2008-06-19 08:11:35 UTC (rev 22449)
+++ trunk/buildroot/package/config/README.buildroot2	2008-06-19 08:11:43 UTC (rev 22450)
@@ -1,15 +1,16 @@
-This is a copy of the kconfig code in the kernel (currently 2.6.22.7) tweaked to
-suit Buildroot.
+This is a copy of the kconfig code in the kernel (currently 2.6.23.14) tweaked
+to suit Buildroot.
 
 To update:
 	cp -r /usr/src/linux/scripts/kconfig package/config.new
 	cd package/config.new
 	cp /usr/src/linux/Documentation/kbuild/kconfig-language.txt .
+	patch -p1 < ../config/kconfig-to-buildroot2.patch
 	mv Makefile Makefile.kconfig
-	patch -p1 < ../config/kconfig-to-buildroot2.patch
 	cp ../config/README.buildroot2 .
 	cp ../config/foo.h .
 	cp ../config/Makefile .
+	cp ../config/kconfig-to-buildroot2.patch .
 	cd ..
 	rm -rf config
 	mv config.new config

Modified: trunk/buildroot/package/config/conf.c
===================================================================
--- trunk/buildroot/package/config/conf.c	2008-06-19 08:11:35 UTC (rev 22449)
+++ trunk/buildroot/package/config/conf.c	2008-06-19 08:11:43 UTC (rev 22450)
@@ -37,6 +37,14 @@
 
 static char nohelp_text[] = N_("Sorry, no help available for this option yet.\n");
 
+static const char *get_help(struct menu *menu)
+{
+	if (menu_has_help(menu))
+		return menu_get_help(menu);
+	else
+		return nohelp_text;
+}
+
 static void strip(char *str)
 {
 	char *p = str;
@@ -172,7 +180,7 @@
 int conf_string(struct menu *menu)
 {
 	struct symbol *sym = menu->sym;
-	const char *def, *help;
+	const char *def;
 
 	while (1) {
 		printf("%*s%s ", indent - 1, "", menu->prompt->text);
@@ -188,10 +196,7 @@
 		case '?':
 			/* print help */
 			if (line[1] == '\n') {
-				help = nohelp_text;
-				if (menu->sym->help)
-					help = menu->sym->help;
-				printf("\n%s\n", menu->sym->help);
+				printf("\n%s\n", get_help(menu));
 				def = NULL;
 				break;
 			}
@@ -209,7 +214,6 @@
 	struct symbol *sym = menu->sym;
 	int type;
 	tristate oldval, newval;
-	const char *help;
 
 	while (1) {
 		printf("%*s%s ", indent - 1, "", menu->prompt->text);
@@ -235,7 +239,7 @@
 			printf("/m");
 		if (oldval != yes && sym_tristate_within_range(sym, yes))
 			printf("/y");
-		if (sym->help)
+		if (menu_has_help(menu))
 			printf("/?");
 		printf("] ");
 		if (!conf_askvalue(sym, sym_get_string_value(sym)))
@@ -272,10 +276,7 @@
 		if (sym_set_tristate_value(sym, newval))
 			return 0;
 help:
-		help = nohelp_text;
-		if (sym->help)
-			help = sym->help;
-		printf("\n%s\n", help);
+		printf("\n%s\n", get_help(menu));
 	}
 }
 
@@ -345,7 +346,7 @@
 			goto conf_childs;
 		}
 		printf("[1-%d", cnt);
-		if (sym->help)
+		if (menu_has_help(menu))
 			printf("?");
 		printf("]: ");
 		switch (input_mode) {
@@ -362,8 +363,7 @@
 			fgets(line, 128, stdin);
 			strip(line);
 			if (line[0] == '?') {
-				printf("\n%s\n", menu->sym->help ?
-					menu->sym->help : nohelp_text);
+				printf("\n%s\n", get_help(menu));
 				continue;
 			}
 			if (!line[0])
@@ -394,8 +394,7 @@
 		if (!child)
 			continue;
 		if (line[strlen(line) - 1] == '?') {
-			printf("\n%s\n", child->sym->help ?
-				child->sym->help : nohelp_text);
+			printf("\n%s\n", get_help(child));
 			continue;
 		}
 		sym_set_choice_value(sym, child->sym);

Modified: trunk/buildroot/package/config/confdata.c
===================================================================
--- trunk/buildroot/package/config/confdata.c	2008-06-19 08:11:35 UTC (rev 22449)
+++ trunk/buildroot/package/config/confdata.c	2008-06-19 08:11:43 UTC (rev 22450)
@@ -338,27 +338,42 @@
 		conf_unsaved++;
 		/* maybe print value in verbose mode... */
 	sym_ok:
+		if (!sym_is_choice(sym))
+			continue;
+		/* The choice symbol only has a set value (and thus is not new)
+		 * if all its visible childs have values.
+		 */
+		prop = sym_get_choice_prop(sym);
+		flags = sym->flags;
+		for (e = prop->expr; e; e = e->left.expr)
+			if (e->right.sym->visible != no)
+				flags &= e->right.sym->flags;
+		sym->flags &= flags | ~SYMBOL_DEF_USER;
+	}
+
+	for_all_symbols(i, sym) {
 		if (sym_has_value(sym) && !sym_is_choice_value(sym)) {
-			if (sym->visible == no)
+			/* Reset values of generates values, so they'll appear
+			 * as new, if they should become visible, but that
+			 * doesn't quite work if the Kconfig and the saved
+			 * configuration disagree.
+			 */
+			if (sym->visible == no && !conf_unsaved)
 				sym->flags &= ~SYMBOL_DEF_USER;
 			switch (sym->type) {
 			case S_STRING:
 			case S_INT:
 			case S_HEX:
-				if (!sym_string_within_range(sym, sym->def[S_DEF_USER].val))
-					sym->flags &= ~(SYMBOL_VALID|SYMBOL_DEF_USER);
+				/* Reset a string value if it's out of range */
+				if (sym_string_within_range(sym, sym->def[S_DEF_USER].val))
+					break;
+				sym->flags &= ~(SYMBOL_VALID|SYMBOL_DEF_USER);
+				conf_unsaved++;
+				break;
 			default:
 				break;
 			}
 		}
-		if (!sym_is_choice(sym))
-			continue;
-		prop = sym_get_choice_prop(sym);
-		flags = sym->flags;
-		for (e = prop->expr; e; e = e->left.expr)
-			if (e->right.sym->visible != no)
-				flags &= e->right.sym->flags;
-		sym->flags &= flags | ~SYMBOL_DEF_USER;
 	}
 
 	sym_add_change_count(conf_warnings || conf_unsaved);

Modified: trunk/buildroot/package/config/expr.h
===================================================================
--- trunk/buildroot/package/config/expr.h	2008-06-19 08:11:35 UTC (rev 22449)
+++ trunk/buildroot/package/config/expr.h	2008-06-19 08:11:43 UTC (rev 22450)
@@ -71,14 +71,12 @@
 struct symbol {
 	struct symbol *next;
 	char *name;
-	char *help;
 	enum symbol_type type;
 	struct symbol_value curr;
 	struct symbol_value def[4];
 	tristate visible;
 	int flags;
 	struct property *prop;
-	struct expr *dep, *dep2;
 	struct expr_value rev_dep;
 };
 
@@ -139,7 +137,7 @@
 	struct property *prompt;
 	struct expr *dep;
 	unsigned int flags;
-	/*char *help; */
+	char *help;
 	struct file *file;
 	int lineno;
 	void *data;

Modified: trunk/buildroot/package/config/gconf.c
===================================================================
--- trunk/buildroot/package/config/gconf.c	2008-06-19 08:11:35 UTC (rev 22449)
+++ trunk/buildroot/package/config/gconf.c	2008-06-19 08:11:43 UTC (rev 22450)
@@ -38,9 +38,6 @@
 static gboolean show_debug = FALSE;
 static gboolean resizeable = FALSE;
 
-static char nohelp_text[] =
-    N_("Sorry, no help available for this option yet.\n");
-
 GtkWidget *main_wnd = NULL;
 GtkWidget *tree1_w = NULL;	// left  frame
 GtkWidget *tree2_w = NULL;	// right frame
@@ -462,12 +459,9 @@
 	GtkTextIter start, end;
 	const char *prompt = menu_get_prompt(menu);
 	gchar *name;
-	const char *help = _(nohelp_text);
+	const char *help;
 
-	if (!menu->sym)
-		help = "";
-	else if (menu->sym->help)
-		help = _(menu->sym->help);
+	help = _(menu_get_help(menu));
 
 	if (menu->sym && menu->sym->name)
 		name = g_strdup_printf(_(menu->sym->name));

Modified: trunk/buildroot/package/config/kconfig-language.txt
===================================================================
--- trunk/buildroot/package/config/kconfig-language.txt	2008-06-19 08:11:35 UTC (rev 22449)
+++ trunk/buildroot/package/config/kconfig-language.txt	2008-06-19 08:11:43 UTC (rev 22450)
@@ -98,6 +98,15 @@
   times, the limit is set to the largest selection.
   Reverse dependencies can only be used with boolean or tristate
   symbols.
+  Note:
+	select is evil.... select will by brute force set a symbol
+	equal to 'y' without visiting the dependencies. So abusing
+	select you are able to select a symbol FOO even if FOO depends
+	on BAR that is not set. In general use select only for
+	non-visible symbols (no promts anywhere) and for symbols with
+	no dependencies. That will limit the usefulness but on the
+	other hand avoid the illegal configurations all over. kconfig
+	should one day warn about such things.
 
 - numerical ranges: "range" <symbol> <symbol> ["if" <expr>]
   This allows to limit the range of possible input values for int

Modified: trunk/buildroot/package/config/kconfig-to-buildroot2.patch
===================================================================
--- trunk/buildroot/package/config/kconfig-to-buildroot2.patch	2008-06-19 08:11:35 UTC (rev 22449)
+++ trunk/buildroot/package/config/kconfig-to-buildroot2.patch	2008-06-19 08:11:43 UTC (rev 22450)
@@ -501,15 +501,6 @@
  };
  
  struct symbol {
-@@ -139,7 +139,7 @@ struct menu {
- 	struct property *prompt;
- 	struct expr *dep;
- 	unsigned int flags;
--	//char *help;
-+	/*char *help; */
- 	struct file *file;
- 	int lineno;
- 	void *data;
 diff -rdup kernel-config/gconf.c config/gconf.c
 --- kernel-config/gconf.c	2007-09-22 00:38:23.000000000 +0200
 +++ config/gconf.c	2007-09-23 15:33:26.000000000 +0200

Modified: trunk/buildroot/package/config/kxgettext.c
===================================================================
--- trunk/buildroot/package/config/kxgettext.c	2008-06-19 08:11:35 UTC (rev 22449)
+++ trunk/buildroot/package/config/kxgettext.c	2008-06-19 08:11:43 UTC (rev 22450)
@@ -170,8 +170,8 @@
 		     menu->file == NULL ? "Root Menu" : menu->file->name,
 		     menu->lineno);
 
-	if (menu->sym != NULL && menu->sym->help != NULL)
-		message__add(menu->sym->help, menu->sym->name,
+	if (menu->sym != NULL && menu_has_help(menu))
+		message__add(menu_get_help(menu), menu->sym->name,
 			     menu->file == NULL ? "Root Menu" : menu->file->name,
 			     menu->lineno);
 
@@ -212,7 +212,9 @@
 	struct message *m = message__list;
 
 	while (m != NULL) {
-		message__print_gettext_msgid_msgstr(m);
+		/* skip empty lines ("") */
+		if (strlen(m->msg) > sizeof("\"\""))
+			message__print_gettext_msgid_msgstr(m);
 		m = m->next;
 	}
 }

Modified: trunk/buildroot/package/config/lkc_proto.h
===================================================================
--- trunk/buildroot/package/config/lkc_proto.h	2008-06-19 08:11:35 UTC (rev 22449)
+++ trunk/buildroot/package/config/lkc_proto.h	2008-06-19 08:11:43 UTC (rev 22450)
@@ -15,6 +15,8 @@
 P(menu_get_prompt,const char *,(struct menu *menu));
 P(menu_get_root_menu,struct menu *,(struct menu *menu));
 P(menu_get_parent_menu,struct menu *,(struct menu *menu));
+P(menu_has_help,bool,(struct menu *menu));
+P(menu_get_help,const char *,(struct menu *menu));
 
 /* symbol.c */
 P(symbol_hash,struct symbol *,[SYMBOL_HASHSIZE]);

Modified: trunk/buildroot/package/config/lxdialog/check-lxdialog.sh
===================================================================
--- trunk/buildroot/package/config/lxdialog/check-lxdialog.sh	2008-06-19 08:11:35 UTC (rev 22449)
+++ trunk/buildroot/package/config/lxdialog/check-lxdialog.sh	2008-06-19 08:11:43 UTC (rev 22450)
@@ -51,7 +51,7 @@
 	printf "Usage: $0 [-check compiler options|-header|-library]\n"
 }
 
-if [ $# == 0 ]; then
+if [ $# -eq 0 ]; then
 	usage
 	exit 1
 fi

Modified: trunk/buildroot/package/config/mconf.c
===================================================================
--- trunk/buildroot/package/config/mconf.c	2008-06-19 08:11:35 UTC (rev 22449)
+++ trunk/buildroot/package/config/mconf.c	2008-06-19 08:11:43 UTC (rev 22450)
@@ -417,11 +417,13 @@
 {
 	struct symbol **sym_arr;
 	struct gstr res;
+	char *dialog_input;
 	int dres;
 again:
 	dialog_clear();
 	dres = dialog_inputbox(_("Search Configuration Parameter"),
-			      _("Enter CONFIG_ (sub)string to search for (omit CONFIG_)"),
+			      _("Enter CONFIG_ (sub)string to search for "
+				"(with or without \"CONFIG\")"),
 			      10, 75, "");
 	switch (dres) {
 	case 0:
@@ -433,7 +435,12 @@
 		return;
 	}
 
-	sym_arr = sym_re_search(dialog_input_result);
+	/* strip CONFIG_ if necessary */
+	dialog_input = dialog_input_result;
+	if (strncasecmp(dialog_input_result, "CONFIG_", 7) == 0)
+		dialog_input += 7;
+
+	sym_arr = sym_re_search(dialog_input);
 	res = get_relations_str(sym_arr);
 	free(sym_arr);
 	show_textbox(_("Search Results"), str_get(&res), 0, 0);
@@ -716,11 +723,11 @@
 	struct gstr help = str_new();
 	struct symbol *sym = menu->sym;
 
-	if (sym->help)
+	if (menu_has_help(menu))
 	{
 		if (sym->name) {
 			str_printf(&help, "CONFIG_%s:\n\n", sym->name);
-			str_append(&help, _(sym->help));
+			str_append(&help, _(menu_get_help(menu)));
 			str_append(&help, "\n");
 		}
 	} else {

Modified: trunk/buildroot/package/config/menu.c
===================================================================
--- trunk/buildroot/package/config/menu.c	2008-06-19 08:11:35 UTC (rev 22449)
+++ trunk/buildroot/package/config/menu.c	2008-06-19 08:11:43 UTC (rev 22450)
@@ -417,3 +417,15 @@
 	return menu;
 }
 
+bool menu_has_help(struct menu *menu)
+{
+	return menu->help != NULL;
+}
+
+const char *menu_get_help(struct menu *menu)
+{
+	if (menu->help)
+		return menu->help;
+	else
+		return "";
+}

Modified: trunk/buildroot/package/config/qconf.cc
===================================================================
--- trunk/buildroot/package/config/qconf.cc	2008-06-19 08:11:35 UTC (rev 22449)
+++ trunk/buildroot/package/config/qconf.cc	2008-06-19 08:11:43 UTC (rev 22450)
@@ -1041,7 +1041,7 @@
 		if (showDebug())
 			debug = debug_info(sym);
 
-		help = print_filter(_(sym->help));
+		help = print_filter(_(menu_get_help(menu)));
 	} else if (menu->prompt) {
 		head += "<big><b>";
 		head += print_filter(_(menu->prompt->text));

Modified: trunk/buildroot/package/config/zconf.tab.c_shipped
===================================================================
--- trunk/buildroot/package/config/zconf.tab.c_shipped	2008-06-19 08:11:35 UTC (rev 22449)
+++ trunk/buildroot/package/config/zconf.tab.c_shipped	2008-06-19 08:11:43 UTC (rev 22450)
@@ -1722,7 +1722,7 @@
   case 83:
 
     {
-	current_entry->sym->help = (yyvsp[0].string);
+	current_entry->help = (yyvsp[0].string);
 ;}
     break;
 
@@ -2280,11 +2280,11 @@
 			break;
 		}
 	}
-	if (sym->help) {
-		int len = strlen(sym->help);
-		while (sym->help[--len] == '\n')
-			sym->help[len] = 0;
-		fprintf(out, "  help\n%s\n", sym->help);
+	if (menu->help) {
+		int len = strlen(menu->help);
+		while (menu->help[--len] == '\n')
+			menu->help[len] = 0;
+		fprintf(out, "  help\n%s\n", menu->help);
 	}
 	fputc('\n', out);
 }

Modified: trunk/buildroot/package/config/zconf.y
===================================================================
--- trunk/buildroot/package/config/zconf.y	2008-06-19 08:11:35 UTC (rev 22449)
+++ trunk/buildroot/package/config/zconf.y	2008-06-19 08:11:43 UTC (rev 22450)
@@ -402,7 +402,7 @@
 
 help: help_start T_HELPTEXT
 {
-	current_entry->sym->help = $2;
+	current_entry->help = $2;
 };
 
 /* depends option */
@@ -649,11 +649,11 @@
 			break;
 		}
 	}
-	if (sym->help) {
-		int len = strlen(sym->help);
-		while (sym->help[--len] == '\n')
-			sym->help[len] = 0;
-		fprintf(out, "  help\n%s\n", sym->help);
+	if (menu->help) {
+		int len = strlen(menu->help);
+		while (menu->help[--len] == '\n')
+			menu->help[len] = 0;
+		fprintf(out, "  help\n%s\n", menu->help);
 	}
 	fputc('\n', out);
 }

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-04-23 14:39 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-04-23 14:39 UTC (permalink / raw)
  To: buildroot

make[1]: Entering directory
`/media/EkstraDisk/buildroot/build_i686/dnsmasq-2.41'
cd src && /usr/bin/make \
 DBUS_MINOR=" `echo -DNO_IPV6 | ../bld/pkg-wrapper pkg-config --modversion
dbus-1 | nawk -F . -- '{ if ($(NF-1)) print \"-DDBUS_MINOR=\"$(NF-1) }'`" 
\
 DBUS_CFLAGS="`echo -DNO_IPV6 | ../bld/pkg-wrapper pkg-config --cflags
dbus-1`"  \
 DBUS_LIBS="  `echo -DNO_IPV6 | ../bld/pkg-wrapper pkg-config --libs
dbus-1`"  \
 SUNOS_LIBS=" `if uname | grep SunOS 2>&1 >/dev/null; then echo -lsocket
-lnsl -lposix4; fi `" \
 SUNOS_VER="  `if uname | grep SunOS 2>&1 >/dev/null; then uname -r | nawk
-F . -- '{ print \"-DSUNOS_VER=\"$2 }'; fi`" \
 -f ../bld/Makefile dnsmasq 
/bin/sh: line 1: nawk: command not found

Don't you have nawk installed? On my system, nawk is a link to gawk.

Seems like we don't currently check for awk in dependencies.sh, will fix 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
06-14-08 17:01  KHAksnes       New Issue                                    
06-14-08 17:01  KHAksnes       Status                   new => assigned     
06-14-08 17:01  KHAksnes       Assigned To               => buildroot       
06-15-08 13:40  jacmet         Note Added: 0008264                          
06-15-08 14:07  KHAksnes       Note Added: 0008274                          
06-15-08 14:08  KHAksnes       File Added: compilelog                       
06-18-08 06:06  jacmet         Note Added: 0008384                          
======================================================================

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-04-23 14:39 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-04-23 14:39 UTC (permalink / raw)
  To: buildroot


Modified:
   trunk/buildroot/package/config/Makefile.kconfig
   trunk/buildroot/package/config/README.buildroot2
   trunk/buildroot/package/config/conf.c
   trunk/buildroot/package/config/confdata.c
   trunk/buildroot/package/config/kconfig-language.txt
   trunk/buildroot/package/config/kconfig-to-buildroot2.patch
   trunk/buildroot/package/config/lex.zconf.c_shipped
   trunk/buildroot/package/config/mconf.c
   trunk/buildroot/package/config/qconf.cc
   trunk/buildroot/package/config/util.c
   trunk/buildroot/package/config/zconf.gperf
   trunk/buildroot/package/config/zconf.hash.c_shipped
   trunk/buildroot/package/config/zconf.tab.c_shipped
   trunk/buildroot/package/config/zconf.y


Changeset:

Sorry, the patch is too large to include (4155 lines).
Please use ViewCVS to see it!

http://uclibc.org/cgi-bin/viewcvs.cgi?view=rev&root=svn&rev=22451

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-04-23 14:39 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-04-23 14:39 UTC (permalink / raw)
  To: buildroot

./arch-arm/kernel-patches-2.6.24/linux-2.6.24-at91.patch
./arch-arm/kernel-patches-2.6.20.4/linux-2.6.20.4-atmel.patch
./arch-arm/kernel-patches-2.6.21.1/linux-2.6.21.1-at91.patch
./arch-arm/kernel-patches-2.6.21.1/linux-2.6.21.1-at91-1-update.patch
./arch-arm/kernel-patches-2.6.21.5/linux-2.6.21.5-at91-1-update.patch
./arch-arm/kernel-patches-2.6.21.5/linux-2.6.21.5-at91.patch

Not to mention having a separate u-boot, just because the Atmel ARM
didn't get to get their patches upstream, while AVR32 did.

>  > On top of that, external toolchain tries to download prepatched
>  > toochain from a site that you control, but that has no such files to
>  > download from.
>
>  BR2_ATMEL_MIRROR should be ftp://www.at91.com/pub/buildroot/
>  I see the files in this location.

There is no gcc 4.2.2 in there. There is no gdb-4.7.1 in there.

>  > Please revert your changes asap.
>  >
>
>  No, if there are problems, it should be fixed within the external toolchain
>  to avoid adding those megabytes, which are of no interest to AVR32 users.
>  There are hooks to patch the external toolchain if neccessary.

Then I guess we will all be getting FTP user accounts to your server
now? So that we can fix things within the external toolchain?
I'm interested in those few kb (namely 915826 bytes). Last time I
checked, I was in the universe of AVR32 users.

You didn't even care to test your changes, and despite protests
removed the toolchain support anyway. You are taking away our freedom
to update, fix, do whatever with the toolchain from within buildroot.
Not to mention breaking things up and making me and a hell lot of
other people lose their day's or week's work.
Please revert your changes asap.

Regards,
   Thiago A. Correa

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-04-23 14:39 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-04-23 14:39 UTC (permalink / raw)
  To: buildroot

make[1]: Entering directory
`/media/EkstraDisk/buildroot/build_i686/dnsmasq-2.41'
cd src && /usr/bin/make \
 DBUS_MINOR=" `echo -DNO_IPV6 | ../bld/pkg-wrapper pkg-config --modversion
dbus-1 | nawk -F . -- '{ if ($(NF-1)) print \"-DDBUS_MINOR=\"$(NF-1) }'`" 
\
 DBUS_CFLAGS="`echo -DNO_IPV6 | ../bld/pkg-wrapper pkg-config --cflags
dbus-1`"  \
 DBUS_LIBS="  `echo -DNO_IPV6 | ../bld/pkg-wrapper pkg-config --libs
dbus-1`"  \
 SUNOS_LIBS=" `if uname | grep SunOS 2>&1 >/dev/null; then echo -lsocket
-lnsl -lposix4; fi `" \
 SUNOS_VER="  `if uname | grep SunOS 2>&1 >/dev/null; then uname -r | nawk
-F . -- '{ print \"-DSUNOS_VER=\"$2 }'; fi`" \
 -f ../bld/Makefile dnsmasq 
/bin/sh: line 1: nawk: command not found

Don't you have nawk installed? On my system, nawk is a link to gawk.

Seems like we don't currently check for awk in dependencies.sh, will fix 

---------------------------------------------------------------------- 
 jacmet - 06-18-08 06:17  
---------------------------------------------------------------------- 
I have now added an awk check to dependencies.sh and forced dnsmasq to use
awk rather than nawk, so closing issue. 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
06-14-08 17:01  KHAksnes       New Issue                                    
06-14-08 17:01  KHAksnes       Status                   new => assigned     
06-14-08 17:01  KHAksnes       Assigned To               => buildroot       
06-15-08 13:40  jacmet         Note Added: 0008264                          
06-15-08 14:07  KHAksnes       Note Added: 0008274                          
06-15-08 14:08  KHAksnes       File Added: compilelog                       
06-18-08 06:06  jacmet         Note Added: 0008384                          
06-18-08 06:17  jacmet         Status                   assigned => resolved
06-18-08 06:17  jacmet         Resolution               open => fixed       
06-18-08 06:17  jacmet         Note Added: 0008394                          
======================================================================

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-04-23 14:39 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-04-23 14:39 UTC (permalink / raw)
  To: buildroot


Added:
   trunk/buildroot/package/config/check.sh


Changeset:
Added: trunk/buildroot/package/config/check.sh
===================================================================
--- trunk/buildroot/package/config/check.sh	                        (rev 0)
+++ trunk/buildroot/package/config/check.sh	2008-06-19 19:06:08 UTC (rev 22454)
@@ -0,0 +1,14 @@
+#!/bin/sh
+# Needed for systems without gettext
+$* -xc -o /dev/null - > /dev/null 2>&1 << EOF
+#include <libintl.h>
+int main()
+{
+	gettext("");
+	return 0;
+}
+EOF
+if [ ! "$?" -eq "0"  ]; then
+	echo -DKBUILD_NO_NLS;
+fi
+


Property changes on: trunk/buildroot/package/config/check.sh
___________________________________________________________________
Name: svn:executable
   + *

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2008-03-17 22:01 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2008-03-17 22:01 UTC (permalink / raw)
  To: buildroot

There is a dependency on buildroot's gcc 3.4.6 that probably should be
added.

As for mapping buildroot's target architectures to uMon ports, that
may be unnecessary.  However, the following ports are available in
uMon:

adse_imx21
as3dev
csb250
csb335
csb360
csb472
csb625
csb655
fads860
ads_imx21
bf537
csb272
csb337
csb431
csb535fs
csb637
csb726
mpc852t
v4
altep2c35
csb226
csb281
csb350
csb437tl
csb536fs
csb650
evalsh2
m68en302
walnut

I'm not the best candidate to limit uMon selection to buildroot
architectures that cover those ports.

Josh

On Mon, Mar 31, 2008 at 10:55 PM, Ulf Samuelsson <ulf@atmel.com> wrote:
>
>
>  > The following patch adds support for the Microcross Micromonitor
>  > (uMon) bootloader.
>  > Josh
>  >
>  >
>
>  Does this work for all targets, or do we want to only
>  enable the configuration for those targets which
>  actually can build uMon?
>
>  Best Regards
>  Ulf Samuelsson
>
>
>
>
>  > diff -purN buildroot/target/Config.in buildroot-umon/target/Config.in
>  > --- buildroot/target/Config.in 2008-03-31 00:15:26.000000000 -0700
>  > +++ buildroot-umon/target/Config.in 2008-03-31 22:22:09.000000000 -0700
>  > @@ -19,6 +19,7 @@ source "target/x86/grub/Config.in"
>  > source "target/x86/syslinux/Config.in"
>  > source "target/powerpc/yaboot/Config.in"
>  > source "target/u-boot/Config.in"
>  > +source "target/umon/Config.in"
>  > endmenu
>  >
>  > menu "Kernel"
>  > diff -purN buildroot/target/Makefile.in buildroot-umon/target/Makefile.in
>  > --- buildroot/target/Makefile.in 2008-03-31 00:15:26.000000000 -0700
>  > +++ buildroot-umon/target/Makefile.in 2008-03-31 22:22:30.000000000 -0700
>  > @@ -15,6 +15,10 @@ ifeq ($(strip $(BR2_TARGET_UBOOT)),y)
>  > include target/u-boot/Makefile.in
>  > endif
>  >
>  > +ifeq ($(strip $(BR2_TARGET_UMON)),y)
>  > +include target/umon/Makefile.in
>  > +endif
>  > +
>  > # and finally build the filesystems/tarballs
>  > include target/*/*.mk
>  >
>  > diff -purN buildroot/target/umon/Config.in buildroot-umon/target/umon/Config.in
>  > --- buildroot/target/umon/Config.in 1969-12-31 16:00:00.000000000 -0800
>  > +++ buildroot-umon/target/umon/Config.in 2008-03-31 22:18:49.000000000 -0700
>  > @@ -0,0 +1,20 @@
>  > +config BR2_TARGET_UMON
>  > + bool "Micromonitor Boot Loader"
>  > + default n
>  > + help
>  > +   Build uMon bootloader.
>  > +
>  > +config BR2_TARGET_UMON_PORT
>  > + string "port name"
>  > + depends on BR2_TARGET_UMON
>  > + default "$(BOARD_NAME)"
>  > + help
>  > +   uMon port name. This is the name of the directory under umon_ports.
>  > +
>  > +config BR2_TARGET_UMON_CUSTOM_PATCH
>  > + string "custom patch"
>  > + depends on BR2_TARGET_UMON
>  > + help
>  > +   If your board requires a custom patch, add the path to the file here.
>  > +   Most users may leave this empty.
>  > +
>  > diff -purN buildroot/target/umon/Makefile.in
>  > buildroot-umon/target/umon/Makefile.in
>  > --- buildroot/target/umon/Makefile.in 1969-12-31 16:00:00.000000000 -0800
>  > +++ buildroot-umon/target/umon/Makefile.in 2008-03-31 22:18:49.000000000 -0700
>  > @@ -0,0 +1,66 @@
>  > +#############################################################
>  > +#
>  > +# umon
>  > +#
>  > +#############################################################
>  > +UMON_VERSION:=sep8_2007
>  > +UMON_SOURCE:=umon_$(UMON_VERSION).tgz
>  > +UMON_SITE:=http://microcross.com
>  > +UMON_PORT:=$(strip $(subst ",,$(BR2_TARGET_UMON_PORT)))
>  > +UMON_DIR:=$(PROJECT_BUILD_DIR)/umon/umon_ports/$(UMON_PORT)
>  > +UMON_HOST_DIR:=$(PROJECT_BUILD_DIR)/umon/umon_main/host
>  > +UMON_PATCH_DIR:=$(PROJECT_BUILD_DIR)/umon-patches
>  > +UMON_CAT:=$(ZCAT)
>  > +UMON_BIN:=boot.bin
>  > +UMON_TOP:=$(PROJECT_BUILD_DIR)/umon/umon_main
>  > +# this is a nasty hack to get the PLATFORM variable from the makefile
>  > +UMON_PLATFORM:=$$(grep '^PLATFORM.*=' $(UMON_DIR)/makefile | sed
>  > 's@^PLATFORM.*=@@')
>  > +
>  > +$(DL_DIR)/$(UMON_SOURCE):
>  > + $(WGET) -P $(DL_DIR) $(UMON_SITE)/$(UMON_SOURCE)
>  > +
>  > +$(UMON_DIR)/.unpacked: $(DL_DIR)/$(UMON_SOURCE)
>  > + $(UMON_CAT) $(DL_DIR)/$(UMON_SOURCE) \
>  > + | tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) -
>  > + touch $@
>  > +
>  > +$(UMON_DIR)/.patched: $(UMON_DIR)/.unpacked
>  > +ifneq ($(strip $(BR2_TARGET_UMON_CUSTOM_PATCH)),"")
>  > + @mkdir -p $(UMON_PATCH_DIR)
>  > + cp -dpr $(BR2_TARGET_UMON_CUSTOM_PATCH) $(UMON_PATCH_DIR)
>  > + toolchain/patch-kernel.sh $(PROJECT_BUILD_DIR)/umon $(UMON_PATCH_DIR) *.patch
>  > +endif
>  > + touch $@
>  > +
>  > +$(UMON_DIR)/build_$(UMON_PLATFORM)/$(UMON_BIN): $(UMON_DIR)/.patched
>  > + $(MAKE) -C $(UMON_HOST_DIR) UMON_TOP=$(UMON_TOP) OSTYPE=linux install
>  > + $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(UMON_DIR) UMONTOP=$(UMON_TOP)
>  > +
>  > +$(BINARIES_DIR)/$(UMON_BIN): $(UMON_DIR)/build_$(UMON_PLATFORM)/$(UMON_BIN)
>  > + cp $(UMON_DIR)/build_$(UMON_PLATFORM)/$(UMON_BIN) $(BINARIES_DIR)/$(UMON_BIN)
>  > +
>  > +umon: $(BINARIES_DIR)/$(UMON_BIN)
>  > +
>  > +umon-clean:
>  > + $(MAKE) -C $(UMON_DIR) clean
>  > +
>  > +umon-dirclean:
>  > + rm -rf $(UMON_DIR)
>  > +
>  > +umon-source: $(DL_DIR)/$(UMON_SOURCE)
>  > +
>  > +#############################################################
>  > +#
>  > +# Toplevel Makefile options
>  > +#
>  > +#############################################################
>  > +ifeq ($(strip $(BR2_TARGET_UMON)),y)
>  > +TARGETS+=umon
>  > +endif
>  > +
>  > +umon-status:
>  > + @echo
>  > + @echo BR2_TARGET_UMON_PORT = $(BR2_TARGET_UMON_PORT)
>  > + @echo BR2_TARGET_UMON_CUSTOM_PATCH = $(BR2_TARGET_UMON_CUSTOM_PATCH)
>  > + @echo
>  > + @exit 0
>  > _______________________________________________
>  > buildroot mailing list
>  > buildroot at uclibc.org
>  > http://busybox.net/mailman/listinfo/buildroot
>  >
>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2007-12-01  7:52 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2007-12-01  7:52 UTC (permalink / raw)
  To: buildroot

default "package/busybox/busybox-1.6.0.config" if BR2_BUSYBOX_VERSION_1_9_X

 Will> I have fixed it by just going back to the 1.6.0 file - is that correct?

Yes.

-- 
Bye, Peter Korsgaard

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2007-12-01  7:52 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2007-12-01  7:52 UTC (permalink / raw)
  To: buildroot

native gcc (not the cross-compiler), which is using headers from
/usr. That looks like a bug, either in the configure script or in the
relevant .mk files for programs that use OpenSSL.

I've got OpenSSL enabled with python linking against it and no such
issues.


Hamish
-- 
Hamish Moffatt VK3SB <hamish@debian.org> <hamish@cloud.net.au>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2007-10-06 20:13 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2007-10-06 20:13 UTC (permalink / raw)
  To: buildroot

I assume make allconfig will give tons of errors.
Today I just tried to make all packages except "Graphic libraries and applications"
and it gave me about 40 errors related with wrong URLs and versions! I'm not talking
about even correctness of installing into staging dir and rootfs packaging.



Best regards,
Ivan
--------------------------------
Embedded Linux engineer,
Promwad Company: http://www.promwad.com/
Homepage : http://www.ivankuten.com/
--------------------------------

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2007-10-06 20:13 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2007-10-06 20:13 UTC (permalink / raw)
  To: buildroot

Regards,
Ivan
-- 

--------------------------------
Embedded Linux engineer,
Promwad Company: http://www.promwad.com/
Homepage : http://www.ivankuten.com/
--------------------------------

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2007-10-06 20:13 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2007-10-06 20:13 UTC (permalink / raw)
  To: buildroot

May be strace does not provide correct output?

Regards,
Ivan

ing. Federico Fuga wrote:
> Hi Ivan,
> 
> which kernel version and kernel headers are you using? Mine are 2.6.23.1
> and 2.6.23, but now I am trying to move the kernel headers to 2.6.21
> (Angstrom  linux works without problems, but are based on different
> kernel headers).
> uclibc I am using are 0.9.29, alsa 1.0.14.
> The failing ioctl is identical both in the working (Angstrom) and not
> working versions, and since the kernel is the same (really the same!) I
> am thinking that is only a problem between the "glue" of uclibc and
> kernel...
> I'll keep you informed.
> 
> Regards,
> 
> ing. Federico Fuga
> 
> Ivan Kuten ha scritto:
>> Hi Federico!
>>
>> I'm observing the same problem with ALSA as you.
>>
>>   
>>> ioctl(4, USBDEVFS_CONTROL, 0xbef809cc)  = 0
>>> ioctl(4, UI_DEV_CREATE, 0xbef80ab0)     = 0
>>> ioctl(4, USBDEVFS_CONNECTINFO, 0xbef80634) = 0
>>> ioctl(4, USBDEVFS_HUB_PORTINFO, 0xbef80748) = -1 ENOTTY (Inappropriate
>>> ioctl for device)
>>>     
>> Think these lines are key to understanding what the problem is.
>>
>> Regards,
>> Ivan
>>
>>
>>   
> 


--------------------------------
Embedded Linux engineer,
Promwad Company: http://www.promwad.com/
Homepage : http://www.ivankuten.com/
--------------------------------

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2007-07-23 18:04 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2007-07-23 18:04 UTC (permalink / raw)
  To: buildroot

the extra path arguments to configure at all.

Care to remove those and send a tested, updated patch?

TIA && cheers,
Bernhard

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2007-07-23 18:04 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2007-07-23 18:04 UTC (permalink / raw)
  To: buildroot

> 
> I Think we should modify this so that the Makefile
> checks for the existance of the source file in $(DL_DIR)
> like most other packages.
> Tried, (see patch below), but the rule:
> 
> +$(DL_DIR)/$$($(PKG)_SOURCE):
>         $(call MESSAGE,"Downloading")
>         test -e $(DL_DIR)/$($(PKG)_SOURCE) || $(WGET) -P $(DL_DIR)
> $($(PKG)_SITE)/$($(PKG)_SOURCE)
>         mkdir -p $(@D)
Mainly because of the way, make handles variables. They get
expanded,when the makefile is parsed. Even the doubled dollarsign can't
help you here.

> 
> fails (is not found) so I had to add 
> 
> +$$($(2)_TARGET_SOURCE):
> +       $(WGET) -P $(DL_DIR) $$($(2)_SITE)/$$($(2)_SOURCE)
> +
> 
In the macro it gets evaluated every time any package wants it to use.
Does that really pays the one unneeded stamp-file?

> to make it work.
> Anyone got a clue why the first rule fails?
> 
> 
> Maybe we should also consider building x11r7 in $(BUILD_DIR)/x11r7
> due to crowding.
You even get afraid of crowding, aren't you?
> 
> 
> Index: package/Makefile.autotools.in
> ===================================================================
> --- package/Makefile.autotools.in       (revision 19425)
> +++ package/Makefile.autotools.in       (arbetskopia)
> @@ -127,7 +127,7 @@
> 
> ################################################################################
>  
>  # Retrieve and unpack the archive
> -$(BUILD_DIR)/%/.stamp_downloaded:
> +$(DL_DIR)/$$($(PKG)_SOURCE):
>         $(call MESSAGE,"Downloading")
>         test -e $(DL_DIR)/$($(PKG)_SOURCE) || $(WGET) -P $(DL_DIR)
> $($(PKG)_SITE)/$($(PKG)_SOURCE)
>         mkdir -p $(@D)
> @@ -279,7 +279,7 @@
>  $(2)_TARGET_AUTORECONF =       $$($(2)_DIR)/.stamp_autoconfigured
>  $(2)_TARGET_PATCH =            $$($(2)_DIR)/.stamp_patched
>  $(2)_TARGET_EXTRACT =          $$($(2)_DIR)/.stamp_extracted
> -$(2)_TARGET_SOURCE =           $$($(2)_DIR)/.stamp_downloaded
> +$(2)_TARGET_SOURCE =           $$(DL_DIR)/$$($(2)_SOURCE)
>  $(2)_TARGET_UNINSTALL =                $$($(2)_DIR)/.stamp_uninstalled
>  $(2)_TARGET_CLEAN =            $$($(2)_DIR)/.stamp_cleaned
>  $(2)_TARGET_DIRCLEAN =         $$($(2)_DIR)/.stamp_dircleaned
> @@ -322,6 +322,9 @@
>  
>  $(1)-depends:          $(1)-source $$($(2)_DEPENDANCIES)
>  
> +$$($(2)_TARGET_SOURCE):
> +       $(WGET) -P $(DL_DIR) $$($(2)_SITE)/$$($(2)_SOURCE)
> +
>  $(1)-source:           $$($(2)_TARGET_SOURCE)
>  
>  # non-build targets
> 
> 
> Best Regards
> Ulf Samuelsson
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> buildroot mailing list
> buildroot at uclibc.org
> http://busybox.net/mailman/listinfo/buildroot
> 

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2007-06-23 20:07 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2007-06-23 20:07 UTC (permalink / raw)
  To: buildroot

* under $(STAGING_DIR)/{bin,lib,include} and $(STAGING_DIR)/{bin,lib}
for the toolchain (e.g. uclibc)
* under $(STAGING_DIR)/usr/{bin,lib,include} and
$(STAGING_DIR)/usr/{bin,lib} for other packages (e.g. gtk)

Is this correct?

If so, we have a problem.
Half the of the package/*/*.mk use one option, half use the other.
As I "svn uped" today, the fontconfig package I had a hard time
patching broke, because expat decided AGAIN to install directly under
/lib.

Please, please establish a clear policy on this, so we can start
submiting patches
-- 
Julien Letessier
<julien.letessier@technosens.fr>

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2007-02-14  8:32 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2007-02-14  8:32 UTC (permalink / raw)
  To: buildroot

Does this handle multiple patch-files ?

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2007-02-14  8:32 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2007-02-14  8:32 UTC (permalink / raw)
  To: buildroot

people think about this, though.

HTH,

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2007-02-14  8:32 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2007-02-14  8:32 UTC (permalink / raw)
  To: buildroot

make[1]: Leaving directory `/tmp/buildroot/package/config'
package/Config.in:33: can't open file "package/config/Config.in"
make: *** [menuconfig] Error 1

Adding Config.h fomr a cvs ckeckout fixed it.
====================================================================== 

---------------------------------------------------------------------- 
 vapier - 03-20-05 18:38  
---------------------------------------------------------------------- 
works fine for me ...

i turned on these options under packages:
[*] DHCP support
[*]  dhcp server
[*]  dhcp relay
[*]  dhcp client 

---------------------------------------------------------------------- 
 thomasez - 03-31-05 11:22  
---------------------------------------------------------------------- 
It has obviously been fixed. This bug should be closed (Yes, I tested this
now aswell). 

---------------------------------------------------------------------- 
 vapier - 03-31-05 12:02  
---------------------------------------------------------------------- 
sounds good 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
02-10-05 13:53  thomasez       New Issue                                    
03-16-05 12:13  andersen       Status                   new => assigned     
03-16-05 12:13  andersen       Assigned To               => uClibc          
03-20-05 18:38  vapier         Note Added: 0000109                          
03-31-05 11:22  thomasez       Note Added: 0000121                          
03-31-05 12:02  vapier         Status                   assigned => closed  
03-31-05 12:02  vapier         Note Added: 0000122                          
02-12-07 05:51  vapier         Status                   closed => assigned  
02-12-07 05:51  vapier         Assigned To              uClibc => buildroot 
03-08-07 00:13  bernhardf      Status                   assigned => closed  
======================================================================

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2007-02-06  7:08 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2007-02-06  7:08 UTC (permalink / raw)
  To: buildroot

make[1]: Leaving directory `/tmp/buildroot/package/config'
package/Config.in:33: can't open file "package/config/Config.in"
make: *** [menuconfig] Error 1

Adding Config.h fomr a cvs ckeckout fixed it.
====================================================================== 

---------------------------------------------------------------------- 
 vapier - 03-20-05 18:38  
---------------------------------------------------------------------- 
works fine for me ...

i turned on these options under packages:
[*] DHCP support
[*]  dhcp server
[*]  dhcp relay
[*]  dhcp client 

---------------------------------------------------------------------- 
 thomasez - 03-31-05 11:22  
---------------------------------------------------------------------- 
It has obviously been fixed. This bug should be closed (Yes, I tested this
now aswell). 

---------------------------------------------------------------------- 
 vapier - 03-31-05 12:02  
---------------------------------------------------------------------- 
sounds good 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
02-10-05 13:53  thomasez       New Issue                                    
03-16-05 12:13  andersen       Status                   new => assigned     
03-16-05 12:13  andersen       Assigned To               => uClibc          
03-20-05 18:38  vapier         Note Added: 0000109                          
03-31-05 11:22  thomasez       Note Added: 0000121                          
03-31-05 12:02  vapier         Status                   assigned => closed  
03-31-05 12:02  vapier         Note Added: 0000122                          
02-12-07 05:51  vapier         Status                   closed => assigned  
02-12-07 05:51  vapier         Assigned To              uClibc => buildroot 
======================================================================

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2007-02-06  7:08 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2007-02-06  7:08 UTC (permalink / raw)
  To: buildroot

targets clean and distclean are to have different effects, depending on
whether or not a .config file is present in the top-level directory.

This is because 'clean' and 'distclean' are part of the noconfig_targets
list.

The attached patch removes clean and distclean from the noconfig_targets
list, allowing the behavior of clean and distclean to vary depending on
whether or not a .config file is present.

====================================================================== 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
04-22-05 19:31  samrobb        New Issue                                    
04-22-05 19:31  samrobb        File Added: noconfig_targets.patch               
    
01-25-06 05:37  prpplague      Status                   assigned => resolved
01-25-06 05:37  prpplague      Resolution               open => fixed       
01-25-06 05:37  prpplague      Additional Information Updated                   

03-08-06 16:53  vapier         Status                   resolved => closed  
02-12-07 05:47  vapier         Status                   closed => assigned  
02-12-07 05:47  vapier         Assigned To              uClibc => buildroot 
======================================================================

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2007-02-06  7:08 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2007-02-06  7:08 UTC (permalink / raw)
  To: buildroot

the build_i386/staging_dir. It seems to be creating a full usr/include,
usr/lib, etc directory hierarchy under inside build_i386/staging_dir,
rather than integrating with the include/lib/etc dirs that exist at the
staging_dir level (ie. the installation of gettext files occurs at one
level too deep)

This means that libintl.h and the shared libraries aren't where other apps
expect it and compilation errors can occur.

The attached patch fixes this - hope it's ok.

Cheers,

Marcus
====================================================================== 

---------------------------------------------------------------------- 
 prpplague - 05-24-06 07:49  
---------------------------------------------------------------------- 
fixed as of revision 15160 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
11-29-05 07:56  crafterm       New Issue                                    
11-29-05 07:56  crafterm       Status                   new => assigned     
11-29-05 07:56  crafterm       Assigned To               => uClibc          
11-29-05 07:56  crafterm       File Added: gettext-stagingfix.patch             
      
05-24-06 07:49  prpplague      Note Added: 0001377                          
05-24-06 07:49  prpplague      Status                   assigned => closed  
02-12-07 05:45  vapier         Status                   closed => assigned  
02-12-07 05:45  vapier         Assigned To              uClibc => buildroot 
======================================================================

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2007-02-06  7:08 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2007-02-06  7:08 UTC (permalink / raw)
  To: buildroot

-e 's/^.*(.CC) \([0-9\.]\)/\1/g' -e "s/[-\ ].*//g"

What do you think? 

---------------------------------------------------------------------- 
 bernhardf - 11-28-06 02:08  
---------------------------------------------------------------------- 
fixed in r16703 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
11-20-06 17:47  alchemar       New Issue                                    
11-20-06 17:47  alchemar       Status                   new => assigned     
11-20-06 17:47  alchemar       Assigned To               => uClibc          
11-20-06 17:47  alchemar       File Added: dependencies.sh                    
11-22-06 13:16  bernhardf      Note Added: 0001770                          
11-22-06 15:41  alchemar       Note Added: 0001788                          
11-22-06 16:14  bernhardf      Note Added: 0001789                          
11-28-06 01:48  bernhardf      Note Added: 0001820                          
11-28-06 02:07  bernhardf      Relationship added       duplicate of 0000961
11-28-06 02:08  bernhardf      Status                   assigned => closed  
11-28-06 02:08  bernhardf      Note Added: 0001824                          
11-28-06 02:08  bernhardf      Resolution               open => fixed       
02-12-07 05:43  vapier         Status                   closed => assigned  
02-12-07 05:43  vapier         Assigned To              uClibc => buildroot 
======================================================================

^ permalink raw reply	[flat|nested] 335+ messages in thread
* (no subject)
@ 2007-02-01  7:54 kou.ishizaki
  2007-02-04  4:37 ` No Subject Benjamin Herrenschmidt
  0 siblings, 1 reply; 335+ messages in thread
From: kou.ishizaki @ 2007-02-01  7:54 UTC (permalink / raw)
  To: jens; +Cc: linuxppc-dev, netdev

jgarzik@pobox.com, jim@jklewis.com
Subject: Re: [Cbe-oss-dev] spidernet: dynamic phy setup code
In-Reply-To: <200701261409.29537.jens@de.ibm.com>
From: Ishizaki Kou <kouish@swc.toshiba.co.jp>
X-Mailer: Mew version 4.2 on Emacs 21.3 / Mule 5.0 (SAKAKI)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Jens-san

> This patch modifies the patch submitted by Kou Ishizaki to make it
work on the
> blade
(http://marc.theaimsgroup.com/?l=linux-netdev&m=116593424505539&w=2).
> Unfortunately I dont have access to a Celleb so I cannot test it
there.

Thanks for arranging our patch to work on Cell Blade.

This patch partially works on celleb but remains 
following several problems.
1. It doesn't recover once an ethernet cable which is
   connected to a spider_net card is unpluged. 
2. It doesn't work when the spider_net card is connected to 
   a 100Mbps ethernet switch.

To solve these problems, we need to restore some codes
you removed from your patch.

(1)
>- if (card->aneg_count > 10) {
>-  /* timeout */
>-  card->aneg_count = 0;
>-  is1000 = !is1000;
>-  goto re_setup;

>- if (phy->speed == 1000 && !is1000) {
>-  is1000 = 1;
>-  goto re_setup;
>- } else if(phy->speed != 1000 && is1000) {
>-  is1000 = 0;
>-  goto re_setup;
>- }

We need to use different auto-neg initial settings between
for 10/100Mbps ethernet switches and for Gbps ethernet switches.
Driver don't know which type of network switch is connected to
network card, so we try both settings alternately in auto negtiation
sequences by using a variable "is1000".
Furthermore, we have a problem that poll_link() may succeed even when
the auto-neg initial setting is for different network switch type,
and the network card does not work on this case. We retry auto-neg
with the another initial setting on this case.

#We are commented that "is1000" should be in spider_net_card.
#We fixed it in another patch. Please refer the following.
#http://ozlabs.org/pipermail/linuxppc-dev/2007-January/030203.html

But we don't think this is the best solution, and we are still
developing 
our spidernet driver. If you have a good alternative idea, please tell
us.

(2)
>- spider_net_write_reg(card, SPIDER_NET_GMACST,
>-        spider_net_read_reg(card, SPIDER_NET_GMACST));
>- spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0x4);

These codes are enabling LINK status interrupt which is disabled
at the beginning of auto-neg.
Without this operation, auto negotiation works only when a connection
detected for the first time, and auto negotiation will not work 
when an ethernet cable is unpluged or pluged.

(3)
>- mii_phy_probe(phy, phy->mii_id);
It seems that PHY reset is necessary before auto negotiation,
after a link once went down.
We can't call directly reset routine from driver, so we call
mii_phy_probe().
We are still developping the patch as we noted, and we are considering
to call mii_phy_probe() from spider_net_setup_aneg(), or to call
reset_one_mii_phy() from bcm54xx_setup_aneg().

We think these (1)-(3) are necessary, but we are afraid that you removed
them
by a reason that they causes some trouble in Cell Blade. If so please
tell us.


Best regards,
Kou Ishizaki

^ permalink raw reply	[flat|nested] 335+ messages in thread
* (no subject)
@ 2006-10-09 23:13 albox
  2006-10-09 23:31 ` No Subject Tobin Davis
  0 siblings, 1 reply; 335+ messages in thread
From: albox @ 2006-10-09 23:13 UTC (permalink / raw)
  To: tdavis; +Cc: alsa-devel



It doesn't work for me either (at least, I can load the driver after using the
patch from Takashi).

Here are some details :

lspci -nv says:
0000:00:1b.0 0403: 8086:27d8 (rev 02)
        Subsystem: 161f:2054
        Flags: bus master, fast devsel, latency 0, IRQ 82
        Memory at d5300000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable+
        Capabilities: [70] #10 [0091]

$ dmesg | grep ALSA
[17179588.696000] ALSA
/home/albuntu/install/realtek-linux-audiopack-4.05b/alsa-driver-1.0.13/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:680:
codec_mask = 0x3
[17179588.876000] ALSA
/home/albuntu/install/realtek-linux-audiopack-4.05b/alsa-driver-1.0.13/pci/hda/hda_codec.c:1741:
hda_codec: model 'medion' is selected
[17179589.604000] ALSA
/home/albuntu/install/realtek-linux-audiopack-4.05b/alsa-driver-1.0.13/pci/hda/../../alsa-kernel/pci/hda/patch_si3054.c:245:
si3054: cannot initialize. EXT MID = 0000
[17179589.612000] ALSA
/home/albuntu/install/realtek-linux-audiopack-4.05b/alsa-driver-1.0.13/pci/hda/../../alsa-kernel/pci/hda/patch_si3054.c:257:
Link Frame Detect(FDT) is not ready (line status: 0000)
[17179635.900000] ALSA
/home/albuntu/install/realtek-linux-audiopack-4.05b/alsa-driver-1.0.13/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:1142:
azx_pcm_prepare: bufsize=0x10000, fragsize=0x1000, format=0x11
[17179635.900000] ALSA
/home/albuntu/install/realtek-linux-audiopack-4.05b/alsa-driver-1.0.13/pci/hda/hda_codec.c:630:
hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x11
[17179635.908000] ALSA
/home/albuntu/install/realtek-linux-audiopack-4.05b/alsa-driver-1.0.13/pci/hda/hda_codec.c:630:
hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x11
[17179635.916000] ALSA
/home/albuntu/install/realtek-linux-audiopack-4.05b/alsa-driver-1.0.13/pci/hda/hda_codec.c:630:
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x11
[17179635.924000] ALSA
/home/albuntu/install/realtek-linux-audiopack-4.05b/alsa-driver-1.0.13/pci/hda/hda_codec.c:630:
hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x11

$ cat /proc/asound/card0/codec#0
Codec: Realtek ALC883
Address: 0
Vendor Id: 0x10ec0883
Subsystem Id: 0x161fd82b
Revision Id: 0x100002
Default PCM: rates 0x560, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x02 [Audio Output] wcaps 0x11: Stereo
  PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x03 [Audio Output] wcaps 0x11: Stereo
  PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x04 [Audio Output] wcaps 0x11: Stereo
  PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x05 [Audio Output] wcaps 0x11: Stereo
  PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
  PCM: rates 0x560, bits 0x1e, types 0x1
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80]
  PCM: rates 0x160, bits 0x06, types 0x1
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80]
  PCM: rates 0x160, bits 0x06, types 0x1
  Connection: 1
     0x22
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
  PCM: rates 0x560, bits 0x1e, types 0x1
  Connection: 1
     0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x00 0x00] [0x1f 0x1f] [0x00 0x00] [0x00 0x00] [0x00 0x00]
[0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 10
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
  Amp-Out vals:  [0x1f 0x1f]
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
  Amp-Out vals:  [0x06 0x06]
  Connection: 2
     0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
  Amp-Out vals:  [0x0b 0x07]
  Connection: 2
     0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
  Amp-Out vals:  [0x06 0x06]
  Connection: 2
     0x05 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x083e: IN OUT HP Detect
  Pin Default 0x01011110: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Black
  Pin-ctls: 0x40: OUT
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x083e: IN OUT HP Detect
  Pin Default 0x01011112: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Black
  Pin-ctls: 0x40: OUT
  Connection: 5
     0x0c 0x0d* 0x0e 0x0f 0x26
Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x083e: IN OUT HP Detect
  Pin Default 0x01011111: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Black
  Pin-ctls: 0x40: OUT
  Connection: 5
     0x0c 0x0d 0x0e* 0x0f 0x26
Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x083e: IN OUT HP Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
  Pin-ctls: 0x40: OUT
  Connection: 5
     0x0c 0x0d 0x0e 0x0f* 0x26
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x08173e: IN OUT HP Detect
  Pin Default 0x02a11c3f: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Black
  Pin-ctls: 0x24: IN
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x08173e: IN OUT HP Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
  Pin-ctls: 0x24: IN
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x08173e: IN OUT HP Detect
  Pin Default 0x99830130: [Fixed] Line In at Int ATAPI
    Conn = ATAPI, Color = Unknown
  Pin-ctls: 0x20: IN
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x08173e: IN OUT HP Detect
  Pin Default 0x0221111f: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Black
  Pin-ctls: 0xc0: OUT HP
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
  Pincap 0x0820: IN
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
  Pin-ctls: 0x00:
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
  Pincap 0x0820: IN
  Pin Default 0x99830131: [Fixed] Line In at Int ATAPI
    Conn = ATAPI, Color = Unknown
  Pin-ctls: 0x00:
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
  Pincap 0x0810: OUT
  Pin Default 0x01451120: [Jack] SPDIF Out at Ext Rear
    Conn = Optical, Color = Black
  Pin-ctls: 0x00:
  Connection: 1
     0x06
Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
  Pincap 0x0820: IN
  Pin Default 0x01c46160: [Jack] SPDIF In at Ext Rear
    Conn = RCA, Color = Orange
  Pin-ctls: 0x00:
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x00 0x00]
[0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Amp-Out caps: N/A
  Amp-Out vals:  [0x00 0x00]
  Connection: 11
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
[0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Amp-Out caps: N/A
  Amp-Out vals:  [0x00 0x00]
  Connection: 11
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x25 [Audio Output] wcaps 0x11: Stereo
  PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
  Amp-Out vals:  [0x00 0x00]
  Connection: 2
     0x25 0x0b


I also tried speaker-test but nothing happened. I'll now try the tarball that
Remy posted last weekend and I'll let you know if it works...

Cheers,
AL

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2006-08-17  1:58 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2006-08-17  1:58 UTC (permalink / raw)
  To: buildroot

>>
This seems to be due to an incompatibility between:
1) toolchain.../gcc-x.x.x/config/arm/linux-elf.h
2) toolchain.../binutils-x.x.x/ld/earmelf_linux_eabi.c

In 1) there is a setting TARGET_LINKER_EMULATION "armelf_linux"
In 2) there is a string (part of a struct initialiser) "armelf_linux_eabi"

so unless I can find matching strings in a version of gcc and ld,
buildroot will never be able to build a toolchain.

But 2) says the file is generated by a shell script, so maybe it's
that script which is to blame !
Or maybe I could just hack 1) to have the correct string.
<<

Don't know enough about how this works to fix the discrepancy ...
is there a missing setting (or patch) which should tell
gcc/config/arm/linux-elf.h to append 'eabi' onto the end
of its 'armelf-linux' string ?

Regards,
MikeW

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2006-08-17  1:58 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2006-08-17  1:58 UTC (permalink / raw)
  To: buildroot

gcc-4.x.x
Latest stable GNU config usable for armeb is: binutils-2.16.1 +
gcc-3.4.6
I am wondering if anybody worked on the build of armeb gnu toolchain
with gcc-4.x.x?

gcc-4.x.x provides new interesting cpu types: arm966, arm1176, ...etc

Many thanks for your answers.

Regards - Luc

-----Original Message-----
From: buildroot-bounces@uclibc.org [mailto:buildroot-bounces at uclibc.org]
On Behalf Of Tor Krill
Sent: vendredi 27 octobre 2006 08:07
To: Philippe Ney
Cc: buildroot at uclibc.org
Subject: Re: [Buildroot] Error building arm toolchain: undefined
referenceto `raise'

Quoting Philippe Ney <philippe.ney@pardes.ws>:

> > Hi,
> >
> > I'm trying to build an up to date toolchain for our arm920t board,
> at91rm9200.
> > However compilation fails with a:
> [...]
> >
>
/home/tor/tmp/buildroot/toolchain_build_arm/gcc-4.1.1/gcc/config/arm/lib
1funcs.asm:1000:
> > undefined reference to `raise'
> [...]
> > Am i missing something here?
>
> Have a look at the gumstix buildroot (www.gumstix.org) for a patch=20
> called uClibc-gcc-41-raise-error.patch, I think this will do the
trick.

Thanks Philippe, this solved the compilation error.

/Tor
_______________________________________________
buildroot mailing list
buildroot at uclibc.org
http://busybox.net/mailman/listinfo/buildroot

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2006-08-17  1:58 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2006-08-17  1:58 UTC (permalink / raw)
  To: buildroot

ccache is a fast compiler cache. It is used as a front end to your compiler to safely cache compilation output. When the same code is compiled again the cached output is used giving a significant speedup (typically 5x).


Is this 5x speedup overstated, or why do you have no need for it?

-------- Original-Nachricht --------
Datum: Fri, 24 Nov 2006 15:10:47 +0100
Von: Bernhard Fischer <rep.nop@aon.at>
An: "Matthias G?lck" <Real.Magic@gmx.de>
Betreff: Re: [Buildroot] problem with absolute paths to tools in ccache

> On Fri, Nov 24, 2006 at 03:06:43PM +0100, "Matthias G?lck" wrote:
> >Thanks for your quick response.
> 
> Well, it was not really helpful, i think.
> 
> >Could you please tell me, why you do not use ccache?
> 
> I simply have no need for it.

-- 
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! 
Ideal f?r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer

-- 
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! 
Ideal f?r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2006-08-17  1:58 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2006-08-17  1:58 UTC (permalink / raw)
  To: buildroot

ccache is a fast compiler cache. It is used as a front end to your compiler to safely cache compilation output. When the same code is compiled again the cached output is used giving a significant speedup (typically 5x).


Is this 5x speedup overstated, or why do you have no need for it?

-------- Original-Nachricht --------
Datum: Fri, 24 Nov 2006 15:10:47 +0100
Von: Bernhard Fischer <rep.nop@aon.at>
An: "Matthias G?lck" <Real.Magic@gmx.de>
Betreff: Re: [Buildroot] problem with absolute paths to tools in ccache

> On Fri, Nov 24, 2006 at 03:06:43PM +0100, "Matthias G?lck" wrote:
> >Thanks for your quick response.
> 
> Well, it was not really helpful, i think.
> 
> >Could you please tell me, why you do not use ccache?
> 
> I simply have no need for it.

-- 
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! 
Ideal f?r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2006-08-17  1:58 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2006-08-17  1:58 UTC (permalink / raw)
  To: buildroot

target types), but the usual reponse is 'get the latest version' which seems a
bit of
a cop-out, plus I am currently required to use 3.4.3 so this does not apply.

a) any ideas to defeat this problem (not involving 3.4.x, x>3 !)
b) if it's frequent, how come it's not been resolved once & for all

Thanks,
MikeW

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2006-08-17  1:58 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2006-08-17  1:58 UTC (permalink / raw)
  To: buildroot

ccache is a fast compiler cache. It is used as a front end to your compiler to safely cache compilation output. 
When the same code is compiled again the cached output is used giving a significant speedup (typically 5x).


Is this 5x speedup overstated, or why do you have no need for it?

-- 
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! 
Ideal f?r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer

^ permalink raw reply	[flat|nested] 335+ messages in thread
* No subject
@ 2006-08-17  1:58 bogus
  0 siblings, 0 replies; 335+ messages in thread
From: bogus @ 2006-08-17  1:58 UTC (permalink / raw)
  To: buildroot

ccache is a fast compiler cache. It is used as a front end to your compiler to safely cache compilation output. When the same code is compiled again the cached output is used giving a significant speedup (typically 5x).


Is this 5x speedup overstated, or why do you have no need for it?
-- 
"Ein Herz f?r Kinder" - Ihre Spende hilft! Aktion: www.deutschlandsegelt.de
Unser Dankesch?n: Ihr Name auf dem Segel der 1. deutschen America's Cup-Yacht!

^ permalink raw reply	[flat|nested] 335+ messages in thread
[parent not found: <Pine.LNX.4.33.0111200151170.1364-100000@home.apu.edu>]
* (no subject)
@ 2004-12-14 16:49 Andi Kleen
  2004-12-15 23:50 ` No Subject Alan Cox
  0 siblings, 1 reply; 335+ messages in thread
From: Andi Kleen @ 2004-12-14 16:49 UTC (permalink / raw)
  To: Keir.Fraser, Christian.Limpach, Steven.Hand, Ian.Pratt, akpm,
	linux-kernel, riel

Sender: ak@wotan.suse.de
To: Rik van Riel <riel@redhat.com>
cc: linux-kernel@vger.kernel.org, akpm@osdl.org,
	Ian Pratt <Ian.Pratt@cl.cam.ac.uk>, Steven.Hand@cl.cam.ac.uk,
	Christian.Limpach@cl.cam.ac.uk, Keir.Fraser@cl.cam.ac.uk
Subject: arch/xen considered harmful was Re: Xen VMM patch set - take 2
References: <E1CXLph-0000XC-00@mta1.cl.cam.ac.uk.suse.lists.linux.kernel>
	<Pine.LNX.4.61.0411281206100.12575@chimarrao.boston.redhat.com.suse.lists.linux.kernel>
From: Andi Kleen <ak@suse.de>
Date: 14 Dec 2004 17:49:07 +0100
In-Reply-To: <Pine.LNX.4.61.0411281206100.12575@chimarrao.boston.redhat.com.suse.lists.linux.kernel>
Message-ID: <p73mzwgddvg.fsf_-_@wotan.suse.de>
Lines: 48
User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.3
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii

Rik van Riel <riel@redhat.com> writes:

[very late answer]

> Stunned silence I guess - merging an architecture is
> usually much more controversial ;)

In my opinion it's still an extremly bad idea to have arch/xen
an own architecture. It will cause a lot of work long term
to maintain it, especially when it gets x86-64 support too.
It would be much better to just merge it with i386/x86-64.

Currently it's already difficult enough to get people to
add fixes to both i386 and x86-64, adding fixes to three
or rather four (xen32 and xen64) architectures will be quite bad.
In practice we'll likely get much worse code drift and missing
fixes. Also I still suspect Ian is underestimating how much
work it is long term to keep an Linux architecture uptodate.

I cannot imagine the virtualization hooks are intrusive anyways. The
only things it needs to hook idle and the page table updates, right?
Doing that cleanly in the existing architectures shouldn't be that
hard.

I suspect xen64 will be rather different from xen32 anyways
because as far as I can see the tricks Xen32 uses to be
fast (segment limits) just plain don't work on 64bit
because the segments don't extend into 64bit space.
So having both in one architecture may also end up messy.

And i386 and x86-64 are in many pieces very different anyways,
I have my doubts that trying to mesh them together in arch/xen
will be very pretty.

Also the other thing I'm worried about is that there is no clear
specification on how the Xen<->Linux interface works. Assuming
there will be other para Hypervisors in the future too will we
end up with even more virtual architectures? It would be much
better to have at least a somewhat defined "linux virtual interface"
first that is actually understood by multiple people outside
the Xen group.

I think before merging stuff the hypervisor interfaces need to be
discussed on linux-kernel. Splitting the patches and posting them
as individual pieces for i386 with good description will be a good
first step for that.

-Andi

^ permalink raw reply	[flat|nested] 335+ messages in thread
* (no subject)
@ 2004-07-16 16:54 Hermann Gottschalk
  2004-07-16 16:59 ` No Subject Jesse Stockall
  0 siblings, 1 reply; 335+ messages in thread
From: Hermann Gottschalk @ 2004-07-16 16:54 UTC (permalink / raw)
  To: linux-kernel

unsubscribe

^ permalink raw reply	[flat|nested] 335+ messages in thread
* (no subject)
@ 2004-02-22 17:51 redzic fadil
  2004-02-22 20:54 ` No Subject Ludootje
  0 siblings, 1 reply; 335+ messages in thread
From: redzic fadil @ 2004-02-22 17:51 UTC (permalink / raw)
  To: linux-kernel

hello


I hope I don't disturb,


I have tried to compile the hello.c module under kernel 2.6.3.
And I'd like to insert the hello.o module in the kernel.
But this doesn't work with kernel 2.6.3 .

I have compiled this module with kernel 2.4.* and it is well.

Also I cannot include the header file module.h, because I get error 
messages.

my module:
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>


int initial_module (void)
{
	printk("\ninitial module\n");
	return (0);
}

void delete_module (void)
{
	printk("\ndelete module\n");
}

module_init(initial_module);
module_exit(delete_module);


my Makefile:
CC=gcc
CFLAGS=-isystem /lib/modules/`uname -r`/build/include -O2 -D__KERNEL__ 
-DMODULE
all: hello.o

If you have any idea please send an E-Mail:  redzic_fadil@hotmail.com

thanks

_________________________________________________________________
Die ultimative Fan-Seite für den MSN Messenger http://www.ilovemessenger.de 
Emoticons und Hintergründe kostenlos downloaden!


^ permalink raw reply	[flat|nested] 335+ messages in thread
[parent not found: <Pine.GSO.4.58.0401251223440.20527@waterleaf.sonytel.be>]
* (no subject)
@ 2003-02-21 13:43 News Admin
  2003-02-21 15:01 ` No Subject Alan Cox
  0 siblings, 1 reply; 335+ messages in thread
From: News Admin @ 2003-02-21 13:43 UTC (permalink / raw)
  To: linux-kernel

>From news Fri Feb 21 14:43:28 2003
Received: (from news@localhost)
	by nimloth.ics.muni.cz (8.11.6+Sun/8.10.0.Beta12) id h1LDhSm13508
	for newsmaster; Fri, 21 Feb 2003 14:43:28 +0100 (MET)
Newsgroups: cz.muni.redir.linux-kernel
Path: news
From: Zdenek Kabelac <kabi@i.am>
Subject: SMP kernel 2.4 and gcc-3.2
Message-ID: <3E562CFC.774860C7@i.am>
Sender: UNKNOWN@decibel.fi.muni.cz
Date: Fri, 21 Feb 2003 13:43:24 GMT
X-Nntp-Posting-Host: decibel.fi.muni.cz
Content-Transfer-Encoding: 7bit
X-Accept-Language: cs, en
Content-Type: text/plain; charset=us-ascii
Mime-Version: 1.0
X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.4.19-rc3-ac3 i686)
Organization: unknown

Hello

As I've so far not noticed any such post - maybe it's just me.

But I simply can not build usable SMP 2.4.2x kernel
with gcc-3.2

Whenever I use gcc-3.2 - the compiled kernel just immediately
reboots machine - Exactly the same kernel with same configuration
compiled with gcc-2.95 works normaly.
The box is Abit BP6/256MB Ram/Matrox G400 with 2xCelerons

I've just seen slightly different behavior with various
versions - sometime it just locked the box (i.e. GRUB screen
has stayed on the screen and I had to press 'reset' button
myself)

Ok - what should I do to help fix this problem - as I've said
I've tried various configuration - I don't think there
is something special in there (http://www.fi.muni.cz/~kabi/.config)

$ gcc -v
Reading specs from /usr/lib/gcc-lib/i386-linux/3.2.3/specs
Configured with: ../src/configure -v
--enable-languages=c,c++,java,f77,proto,pascal,objc,ada --prefix=/usr
--mandir=/usr/share/man --infodir=/usr/share/info
--with-gxx-include-dir=/usr/include/c++/3.2 --enable-shared
--with-system-zlib --enable-nls --without-included-gettext
--enable-__cxa_atexit --enable-clocale=gnu --enable-java-gc=boehm
--enable-objc-gc i386-linux
Thread model: posix
gcc version 3.2.3 20030210 (Debian prerelease)


please Cc: me

-- 
  .''`.
 : :' :    Zdenek Kabelac  kabi@{debian.org, users.sf.net, fi.muni.cz}
 `. `'           Debian GNU/Linux maintainer - www.debian.{org,cz}
   `-


^ permalink raw reply	[flat|nested] 335+ messages in thread
* (no subject)
@ 2002-08-05 13:08 Christos Kartsaklis
  2002-08-05 14:53 ` No Subject Alan Cox
  0 siblings, 1 reply; 335+ messages in thread
From: Christos Kartsaklis @ 2002-08-05 13:08 UTC (permalink / raw)
  To: linux-kernel

Folks, I got this Oops on my box (Redhat 7.1) while mounting one of my disks. 
After the Oops report comes info which might be of some use to you. 

I have two 60.0 GB ATA133 hard disks installed on my system, a Maxtor D740X-6L
and a Quantum Fireball Plus AS 60.0 GB (not identified properly in dmesg),
both in EXT2 fs. I see why the system got poked that sharply, I don't know
why this _random_ behaviour is caused though. Note also that the BIOS cannot
identify any of them. I have been using these two disks on Redhat 7.2, and
today I tried to install them on another box (the offending one) running Redhat
7.1, not being used for ~7 months. 

If you need more info, let me know. I hope this helps, and yes, I know that I
should get a newer kernel version. 

Please CC me all, as I am not subscribed to the list.


ksymoops 2.4.1 on i686 2.4.7-10.  Options used
     -V (default)
     -k /proc/ksyms (default)
     -l /proc/modules (default)
     -o /lib/modules/2.4.7-10/ (default)
     -m /boot/System.map-2.4.7-10 (default)

Warning: You did not tell me where to find symbol information.  I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc.  ksymoops -h explains the options.

Error (expand_objects): cannot stat(/lib/sd_mod.o) for sd_mod
Error (expand_objects): cannot stat(/lib/scsi_mod.o) for scsi_mod
Error (pclose_local): find_objects pclose failed 0x100
Warning (compare_maps): mismatch on symbol partition_name  , ksyms_base says c01b3570, System.map says c0155720.  Ignoring ksyms_base entry
Warning (compare_maps): mismatch on symbol lp_table  , lp says c885d640, /lib/modules/2.4.7-10/kernel/drivers/char/lp.o says c885d440.  Ignoring /lib/modules/2.4.7-10/kernel/drivers/char/lp.o entry
Warning (compare_maps): mismatch on symbol usb_devfs_handle  , usbcore says c88479a0, /lib/modules/2.4.7-10/kernel/drivers/usb/usbcore.o says c88474c0.  Ignoring /lib/modules/2.4.7-10/kernel/drivers/usb/usbcore.o entry
Warning (compare_maps): mismatch on symbol sd  , sd_mod says c881bce4, /lib/modules/2.4.7-10/kernel/drivers/scsi/sd_mod.o says c881bba0.  Ignoring /lib/modules/2.4.7-10/kernel/drivers/scsi/sd_mod.o entry
Warning (compare_maps): mismatch on symbol proc_scsi  , scsi_mod says c8817568, /lib/modules/2.4.7-10/kernel/drivers/scsi/scsi_mod.o says c8815df0.  Ignoring /lib/modules/2.4.7-10/kernel/drivers/scsi/scsi_mod.o entry
Warning (compare_maps): mismatch on symbol scsi_devicelist  , scsi_mod says c8817594, /lib/modules/2.4.7-10/kernel/drivers/scsi/scsi_mod.o says c8815e1c.  Ignoring /lib/modules/2.4.7-10/kernel/drivers/scsi/scsi_mod.o entry
Warning (compare_maps): mismatch on symbol scsi_hostlist  , scsi_mod says c8817590, /lib/modules/2.4.7-10/kernel/drivers/scsi/scsi_mod.o says c8815e18.  Ignoring /lib/modules/2.4.7-10/kernel/drivers/scsi/scsi_mod.o entry
Warning (compare_maps): mismatch on symbol scsi_hosts  , scsi_mod says c8817598, /lib/modules/2.4.7-10/kernel/drivers/scsi/scsi_mod.o says c8815e20.  Ignoring /lib/modules/2.4.7-10/kernel/drivers/scsi/scsi_mod.o entry
Warning (compare_maps): mismatch on symbol scsi_logging_level  , scsi_mod says c8817564, /lib/modules/2.4.7-10/kernel/drivers/scsi/scsi_mod.o says c8815dec.  Ignoring /lib/modules/2.4.7-10/kernel/drivers/scsi/scsi_mod.o entry
CPU:    0
EIP:    0010:[<c018cf9a>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010212
eax: 00000000   ebx: 00001640   ecx: 00000000   edx: 00000000
esi: c02de2c4   edi: 00001100   ebp: 00000040   esp: c440dee8
ds: 0018   es: 0018   ss: 0018
Process mount (pid: 1190, stackpage=c440d000)
Stack: 00001600 00000040 00000464 00000001 c02de458 00000330 c018d031 00001640
       00000001 c02de2c4 c75ce440 c449faa0 c449faa0 c018d0ef c75d2860 c75ce440
       c013cb97 c75ce440 c449faa0 c449faa0 c75ce440 c13df300 c0134e03 c75ce440
Call Trace: [<c018d031>] [<c018d0ef>] [<c013cb97>] [<c0134e03>] [<c0134d2d>]
   [<c013f63e>] [<c0135006>] [<c0106f0b>]
Code: 8b 40 28 85 c0 74 04 56 ff d0 5a 80 a6 ae 00 00 00 fb 8d 86

>>EIP; c018cf9a <ide_revalidate_disk+da/110>   <=====
Trace; c018d031 <revalidate_drives+61/90>
Trace; c018d0ef <ide_open+2f/100>
Trace; c013cb97 <blkdev_open+47/80>
Trace; c0134e03 <dentry_open+c3/140>
Trace; c0134d2d <filp_open+4d/60>
Trace; c013f63e <getname+5e/a0>
Trace; c0135006 <sys_open+36/b0>
Trace; c0106f0b <system_call+33/38>
Code;  c018cf9a <ide_revalidate_disk+da/110>
00000000 <_EIP>:
Code;  c018cf9a <ide_revalidate_disk+da/110>   <=====
   0:   8b 40 28                  mov    0x28(%eax),%eax   <=====
Code;  c018cf9d <ide_revalidate_disk+dd/110>
   3:   85 c0                     test   %eax,%eax
Code;  c018cf9f <ide_revalidate_disk+df/110>
   5:   74 04                     je     b <_EIP+0xb> c018cfa5 <ide_revalidate_disk+e5/110>
Code;  c018cfa1 <ide_revalidate_disk+e1/110>
   7:   56                        push   %esi
Code;  c018cfa2 <ide_revalidate_disk+e2/110>
   8:   ff d0                     call   *%eax
Code;  c018cfa4 <ide_revalidate_disk+e4/110>
   a:   5a                        pop    %edx
Code;  c018cfa5 <ide_revalidate_disk+e5/110>
   b:   80 a6 ae 00 00 00 fb      andb   $0xfb,0xae(%esi)
Code;  c018cfac <ide_revalidate_disk+ec/110>
  12:   8d 86 00 00 00 00         lea    0x0(%esi),%eax


10 warnings and 3 errors issued.  Results may not be reliable.


cat /proc/version:
------------------
Linux version 2.4.7-10 (bhcompile@stripples.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)) #1 Thu Sep 6 17:27:27 EDT 2001

dmesg:
------
Linux version 2.4.7-10 (bhcompile@stripples.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)) #1 Thu Sep 6 17:27:27 EDT 2001
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
 BIOS-e820: 0000000007ff0000 - 0000000007ff3000 (ACPI NVS)
 BIOS-e820: 0000000007ff3000 - 0000000008000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
On node 0 totalpages: 32752
zone(0): 4096 pages.
zone(1): 28656 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=302 BOOT_FILE=/boot/vmlinuz-2.4.7-10
Initializing CPU#0
Detected 451.033 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 897.84 BogoMIPS
Memory: 125148k/131008k available (1269k kernel code, 4576k reserved, 90k data, 220k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
CPU:     After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU:             Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Katmai) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
mxt_scan_bios: enter
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10d
block: queued sectors max/low 83064kB/27688kB, 256 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: QUANTUM FIREBALL CR8.4A, ATA DISK drive
hdc: MAXTOR 6L060J3, ATA DISK drive
hdd: AEA\x02@\x01, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 16514064 sectors (8455 MB) w/418KiB Cache, CHS=1027/255/63, UDMA(33)
hdc: 117266688 sectors (60041 MB) w/1819KiB Cache, CHS=116336/16/63, UDMA(33)
hdd: 0 sectors (0 MB) w/1900KiB Cache, CHS=513/0/3
hdd: INVALID GEOMETRY: 0 PHYSICAL HEADS?
ide-floppy driver 0.97
Partition check:
 hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
 hdc: hdc1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
hdd: 0 sectors (0 MB) w/1900KiB Cache, CHS=513/0/3
hdd: INVALID GEOMETRY: 0 PHYSICAL HEADS?
ide-floppy driver 0.97
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 378k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
Freeing unused kernel memory: 220k freed
Adding Swap: 136512k swap-space (priority -1)
Adding Swap: 88316k swap-space (priority -2)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.259 $ time 17:36:49 Sep  6 2001
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 3
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
8139too Fast Ethernet driver 0.9.18a
PCI: Found IRQ 10 for device 00:10.0
PCI: Sharing IRQ 10 with 00:04.0
eth0: RealTek RTL8139 Fast Ethernet at 0xc8866100, 00:00:21:db:01:e7, IRQ 10
eth0:  Identified 8139 chip type 'RTL-8139B'
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
lp0: console ready

^ permalink raw reply	[flat|nested] 335+ messages in thread
* (no subject)
@ 2002-08-03 19:26 Pawel Kot
  2002-08-03 21:45 ` No Subject Alan Cox
  0 siblings, 1 reply; 335+ messages in thread
From: Pawel Kot @ 2002-08-03 19:26 UTC (permalink / raw)
  To: Alan Cox, Marcelo Tosatti
  Cc: Linux Kernel Mailing List, Bartlomiej Zolnierkiewicz

Hi,

The problem I reported once, still exist in 2.4.19. See my previous emails
for the reference:
http://marc.theaimsgroup.com/?l=linux-kernel&m=102495067602135&w=2
http://marc.theaimsgroup.com/?l=linux-kernel&m=102277249800423&w=2
It is fixed in -ac series though.

As Bartek Zolnierkiewicz pointed me, the problem was introduced by two
factors:
 - checking the return value of pci_enable_device(dev)
 - some settings problem with PCI resources -- BIOS/controller does
prepare them for XP
(these are more-less Bartek's words).

What helped me was using fixup_device_piix() from -ac in
ide_scan_pcidev(). My controler's ID is DEVID_ICH3M.
It is used in a different, more generic way in -ac, so I don't post the
patch.

Alan, Marcelo: is there any chance that this change will be ported from
-ac in 2.4.20?

many thanks to Bartek,
pkot
-- 
mailto:pkot@linuxnews.pl :: mailto:pkot@slackware.pl
http://kt.linuxnews.pl/ :: Kernel Traffic po polsku












^ permalink raw reply	[flat|nested] 335+ messages in thread
* No Subject
@ 2001-08-24 22:16 abraxas2
  0 siblings, 0 replies; 335+ messages in thread
From: abraxas2 @ 2001-08-24 22:16 UTC (permalink / raw)
  To: linux-kernel

hi everybody,

i have implemented an improved linux ntfs driver.

the following changes have been done :

- full deletion support
- full hardlink support
- support for multiple mft records
- support for chmod, rename, truncate, df, du, ...
- implemented new tools ntchmod, ntlink, ntrm, ntundel (undeletion)
  there is a NT port of the tools, too
- fixed a bunch of FIXME's and another bunch of bugs

the kernel part of the sources increased almost to the double.

one of the performed tests was a complete linux kernel build on a
ntfs volume. without any complaints by chkdsk.


this is currently for kernel 2.2.x.

work is in progress for the following items :
- support for kernel 2.4.x
- support for symlinks, device files and chown/chgrp
- full support for compressed files

if you are interested, please send me an email. please indicate if you
want only the kernel part or the complete sources.

Abraxas

<abraxas2@findhere.com>



^ permalink raw reply	[flat|nested] 335+ messages in thread
* No Subject
@ 2000-11-19 20:02 jingai
  0 siblings, 0 replies; 335+ messages in thread
From: jingai @ 2000-11-19 20:02 UTC (permalink / raw)
  To: linuxppc-dev


This may not be the appropriate list to post this on, but since it
does work on my x86 box at work, here goes...

I'm having trouble burning multisession discs with cdrdao.  My
TOC file is as follows:

CD_ROM_XA
TRACK AUDIO
FILE "audio.raw" 0

TRACK MODE2_FORM1
DATAFILE "data.raw"

And the command line:

cdrdao write --multi --device 1,4,0 my.toc

Here is the output from cdrdao:

Cdrdao version 1.1.3 - (C) Andreas Mueller <mueller@daneb.ping.de>
  SCSI interface library - (C) Joerg Schilling
  L-EC encoding library - (C) Heiko Eissfeldt
  Paranoia DAE library - (C) Monty

1,4,0: YAMAHA CRW6416S  Rev: 1.0c
Using driver: Generic SCSI-3/MMC - Version 1.0 (data) (options 0x0000)

Starting write simulation at speed 6...
Pausing 10 seconds - hit CTRL-C to abort.
Process can be aborted with QUIT signal (usually CTRL-\).
Using POSIX real time scheduling.
Executing power calibration...
cdrdao: No such device or address. Cannot set SG_SET_TIMEOUT.

It is apparently failing on the power calibration, but with the same
CD writer at work, it does not fail here.

My second problem happens both on x86 and PowerPC.  If I
specify the --multi option to cdrdao, it fails shortly after the
burn begins (it does write some data to the disc though) with
a buffer underrun.  If I omit the --multi option, it burns fine
on x86.  Seeing as I am trying to burn a multisession disc,
it's kind of necessary (I think?) to specify the --multi
option.

Both boxes are running Debian woody and kernel 2.2.18pre21.

Any help would be greatly appreciated.

Regards,
Jonathan


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 335+ messages in thread
end of thread, other threads:[~2023-08-31  7:20 UTC | newest]

Thread overview: 335+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-02-14  8:32 No subject bogus
  -- strict thread matches above, loose matches on Subject: below --
2023-08-31  7:20 Peter Yin
2022-06-21  9:06 ventas
2019-08-21 15:45 Ivan Mikhaylov
2019-03-19 14:41 Maxim Levitsky
2019-03-20 11:03 ` Felipe Franciosi
2019-03-20 19:08   ` Maxim Levitsky
2019-03-21 16:12     ` Stefan Hajnoczi
2019-03-21 16:21       ` Keith Busch
2019-03-21 16:41         ` Felipe Franciosi
2019-03-21 17:04           ` Maxim Levitsky
2019-03-22  7:54             ` Felipe Franciosi
2019-03-22 10:32               ` Maxim Levitsky
2019-03-22 15:30               ` Keith Busch
2019-03-25 15:44                 ` Felipe Franciosi
2019-03-16 11:17 Bharath Vedartham
2018-10-05 13:39 Christoph Hellwig
2018-08-02 10:48 TU PHUNG VAN
2018-07-06 21:16 Santosh Shilimkar
2018-07-06 21:16 ` Santosh Shilimkar
2018-07-06 21:16 ` Santosh Shilimkar
2018-07-06 21:18   ` Santosh Shilimkar
2018-07-06  5:52 inventsekar
2018-06-23 21:08 David Lechner
2018-05-08  6:10 Vishnu Gopinath
2018-05-04 20:06 Bjorn Helgaas
2018-04-20  8:02 Christoph Hellwig
2018-04-20  8:02 ` Christoph Hellwig
2018-04-16  1:22 Andrew Worsley
2018-02-25  0:39 J Freyensee
2018-02-02  6:54 Jianchao Wang
2017-11-30 10:25 Mary Cuevas
2017-09-13 18:15 unmesh rathi
2017-08-22  1:38 Nicholas Piggin
2017-06-26 13:16 [PATCH] arm64: use readq() instead of readl() to read 64bit entry_point Luc Van Oostenryck
2017-07-03 23:46 ` No subject Khuong Dinh
2017-06-06  7:19 From Lori J. Robinson
2017-06-04 11:59 Yury Norov
     [not found] <CAMj-D2DO_CfvD77izsGfggoKP45HSC9aD6auUPAYC9Yeq_aX7w@mail.gmail.com>
2017-05-04 16:44 ` gengdongjiu
2017-04-21 23:23 Sandeep Mann
2017-04-21  4:59 wendyqzx at gmail.com
2017-04-16 15:11 wendyqzx at gmail.com
2017-04-09 10:46 76564 at max.arc.nasa.gov
2017-02-07  0:22 Scott Bauer
2017-02-07  0:46 ` Jens Axboe
2017-01-31  7:58 Andy Gross
2017-01-09 11:33 [PATCH v2 0/7] uapi: export all headers under uapi directories Arnd Bergmann
2017-01-13 10:46 ` [PATCH v3 0/8] " Nicolas Dichtel
2017-01-13 10:46   ` [PATCH v3 1/8] arm: put types.h in uapi Nicolas Dichtel
2017-01-13 15:36     ` No subject David Howells
2017-01-13 10:46   ` [PATCH v3 4/8] x86: stop exporting msr-index.h to userland Nicolas Dichtel
2017-01-13 15:43     ` No subject David Howells
2016-12-01 10:00 Ramana Radhakrishnan
2016-11-19 18:31 bogus
2016-11-19 18:31 bogus
2016-11-19 18:31 bogus
2016-11-19 18:31 bogus
2016-11-11  3:38 Chunyan Zhang
2016-09-30 14:37 Maxime Ripard
2016-07-10  9:24 Neil Armstrong
2016-07-10  9:24 ` Neil Armstrong
2016-06-13  6:24 bogus
2016-06-13  6:24 bogus
2016-04-22  8:25 Daniel Lezcano
2016-04-22  8:27 ` Daniel Lezcano
2016-04-11  7:51 Paul Walmsley
2016-03-07 17:52 nunojsa
2016-02-09  7:29 bogus
2015-12-13 21:57 何旦洁
2015-11-16 16:13 bogus
2015-10-27  0:44 xuyiping
     [not found] <E1ZqY3A-0004Mt-KH@feisty.vs19.net>
2015-10-26  3:21 ` Jiada Wang
2015-10-21  6:17 Rock Lee
2015-10-12 17:26 bogus
2015-09-18 17:23 Shraddha Barke
2015-09-18  4:49 Shraddha Barke
2015-09-01 14:14 Mika Penttilä
2015-09-01 15:22 ` Fabio Estevam
2015-07-22 14:05 Chunfeng Yun
2015-07-15  9:32 Yuan Yao
2015-05-18 20:00 raghu MG
2015-04-21 10:18 Ard Biesheuvel
2015-03-30  4:56 Woody Wu
2015-02-26 16:56 Jorge Ramirez-Ortiz
2015-02-18 16:14 Lee Jones
2015-01-27 16:49 Grzegorz Dwornicki
2014-11-10  6:39 Libo Chen
2014-11-10  3:11 Libo Chen
2014-10-28 14:13 Mark Rutland
2014-09-22 19:41 Santosh Shilimkar
2014-09-22  7:45 Jingchang Lu
2014-09-13 19:40 bogus
2014-09-13 19:40 bogus
2014-09-13 19:40 bogus
2014-09-13 19:40 bogus
2014-09-13 19:40 bogus
2014-08-29 14:22 Ravi Raj
2014-08-29 14:47 ` Valdis.Kletnieks at vt.edu
2014-08-29 14:58   ` Ravi Raj
2014-08-29 15:32     ` No subject Valdis.Kletnieks at vt.edu
2014-08-29 15:34     ` Valdis.Kletnieks at vt.edu
2014-07-09 17:49 Sebastian Andrzej Siewior
2014-05-24  1:21 Loc Ho
2014-05-12 16:40 Santosh Shilimkar
2014-05-12 16:38 Santosh Shilimkar
2014-05-12  4:37 Sivakumar V
2014-04-21  2:59 Amber Thrall
2014-02-22 15:53 Hans de Goede
2014-01-21  4:09 John Tobias
2014-01-16 16:11 Loc Ho
2014-01-16 16:09 Loc Ho
2014-01-13 10:32 Lothar Waßmann
2014-01-13 10:29 Lothar Waßmann
2013-12-12  7:30 Loc Ho
2013-11-01  7:04 Xiubo Li
2013-09-24  3:13 Rohit Vaswani
2013-09-15  9:49 bogus
2013-09-15  9:49 bogus
2013-09-15  9:49 bogus
2013-09-02 17:01 Drasko DRASKOVIC
2013-08-24  9:29 Haojian Zhuang
2013-07-30  4:09 PV Juliet
2013-07-26 10:05 Haojian Zhuang
2013-06-28  5:49 Wang, Yalin
2013-06-19 10:57 Ben Dooks
2013-04-24 18:07 Viral Mehta
2013-04-12  7:08 Callum Hutchinson
2013-04-03 10:31 bogus
2013-04-03 10:31 bogus
2013-04-03 10:31 bogus
2013-04-03 10:31 bogus
2013-02-25  7:24 Prasad Lakshman
2013-02-15  5:48 Kaushal Billore
2013-02-06 22:30 Jimmy Pan
2013-01-16 21:46 bogus
2013-01-16 21:46 bogus
2012-12-29  9:17 steve.zhan
2012-12-05 13:48 Niroj Pokhrel
2012-11-19 11:41 唐忠诚
2012-11-11 14:16 Sammy Chan
2012-11-08  9:33 bogus
2012-11-08  8:07 Abhimanyu Kapur
2012-11-02 10:46 Pritam Bankar
2012-10-15  9:24 Niroj Pokhrel
2012-10-14 10:05 Alexey Dobriyan
2012-08-27  6:40 Simon Horman
2012-08-13 10:09 Vivek Panwar
2012-08-06 10:43 =?gb18030?B?wObC5A==?=
2012-07-30 19:04 siddhesh phadke
2012-06-21 18:26 Paul Walmsley
2012-06-06 10:33 Sascha Hauer
2012-05-25 15:26 bogus
2012-05-25 15:26 bogus
2012-05-18 12:27 Sascha Hauer
2012-04-09 17:56 Martynov Semen
2012-04-10  2:26 ` Vladimir Murzin
2012-04-10  4:03   ` Martynov Semen
2012-04-10  4:48   ` Martynov Semen
2012-04-10 16:08     ` Vladimir Murzin
2012-04-10 17:00       ` Semen Martynov
2012-04-05  7:54 bogus
2012-04-05  7:54 bogus
2012-03-20 18:28 John Szakmeister
2012-02-27  5:00 bogus
2012-02-27  5:00 bogus
2012-02-27  5:00 bogus
2012-01-15  8:24 bogus
2011-12-30 17:16 Philip Anil-QBW348
2011-12-28 14:01 Shawn Guo
2011-12-16  2:18 Swapnil Gaikwad
2011-12-02 16:01 Will Deacon
2011-11-28  2:35 Jett.Zhou
2011-11-21 15:22 Jimmy Pan
2011-11-12 14:39 bogus
2011-11-12 14:39 bogus
2011-09-23  3:42 毕春雷
2011-09-19  1:45 Saleem Abdulrasool
2011-09-15  2:03 Jongpill Lee
2011-08-05  3:08 bogus
2011-08-05  3:08 bogus
2011-08-05  3:08 bogus
2011-08-05  3:08 bogus
2011-08-05  3:08 bogus
2011-07-21 11:12 Padmavathi Venna
2011-06-27 20:47 Jongpill Lee
2011-06-27 20:47 John Ogness
2011-06-16 11:41 Venkateswarlu P
2011-06-14 12:20 Venkateswarlu P
2011-06-13 17:29 Andre Silva
2011-06-05 18:33 Hector Oron
2011-06-04 23:16 bogus
2011-06-04 23:16 bogus
2011-05-17  9:28 Javier Martin
2011-05-13 19:35 Vadim Bendebury
2011-04-07  5:55 bogus
2011-04-07  5:55 bogus
2011-04-07  5:55 bogus
2011-04-07  5:55 bogus
2011-04-07  5:55 bogus
2011-03-22 18:13 nijil yes
2011-03-01 14:02 Javier Martin
2011-02-26  6:20 Aldyth Maharsha
2011-01-13  9:13 Uwe Kleine-König
2010-12-19 23:59 bogus
2010-12-19 23:59 bogus
2010-12-19 23:59 bogus
2010-12-19 23:59 bogus
2010-12-19 23:59 bogus
2010-12-19 23:59 bogus
2010-12-19 23:59 bogus
2010-12-19 23:59 bogus
2010-12-19 23:59 bogus
2010-12-19 23:59 bogus
2010-12-19 23:59 bogus
2010-12-19 23:59 bogus
2010-12-19 23:59 bogus
2010-12-19 23:59 bogus
2010-12-03  1:08 tarek attia
2010-10-08  6:02 Daein Moon
2010-09-24 14:53 bogus
2010-09-24 14:53 bogus
2010-09-24 14:53 bogus
2010-09-24 14:53 bogus
2010-09-24 14:53 bogus
2010-09-24 14:53 bogus
2010-09-24 14:53 bogus
2010-09-24 14:53 bogus
2010-09-24 14:53 bogus
2010-09-24 14:53 bogus
2010-09-24 14:53 bogus
2010-09-09  3:33 tarek attia
2010-08-30  5:02 auto595907
2010-08-23 14:32 auto595907
2010-07-23 10:05 bogus
2010-06-24 13:48 Uwe Kleine-König
2010-06-07 17:58 Dave Hylands
2010-05-18 10:38 Marek Szyprowski
2010-04-17 21:43 nelakurthi koteswararao
2010-03-25 17:02 bogus
2010-03-25 17:02 bogus
2010-02-25  9:36 Thomas Weber
2009-11-19 13:58 Vimal Singh
2009-09-17  9:37 Marc Kleine-Budde
2009-09-07 14:07 Somshekar ChandrashekarKadam
2009-08-25 10:34 Syed Rafiuddin
2009-02-27 19:01 bogus
2009-02-27 19:01 bogus
2009-02-27 19:01 bogus
2009-02-27 19:01 bogus
2009-02-27 19:01 bogus
2009-02-27 19:01 bogus
2009-02-27 19:01 bogus
2009-02-15  8:49 bogus
2009-01-04 17:33 bogus
2009-01-04 17:33 bogus
2008-12-07 21:22 bogus
2008-11-21  1:22 bogus
2008-10-23 17:17 bogus
2008-10-23 17:17 bogus
2008-10-23 17:17 bogus
2008-10-14 11:50 bogus
2008-10-14 11:50 bogus
2008-10-14 11:50 bogus
2008-10-14 11:50 bogus
2008-10-14 11:50 bogus
2008-10-14 11:50 bogus
2008-10-14 11:50 bogus
2008-10-14 11:50 bogus
2008-10-14 11:50 bogus
2008-10-14 11:50 bogus
2008-10-14 11:50 bogus
2008-09-15 17:22 bogus
2008-09-15 17:22 bogus
2008-07-28  4:41 bogus
2008-07-14 13:16 bogus
2008-07-14 13:16 bogus
2008-07-14 13:16 bogus
2008-07-14 13:16 bogus
2008-04-23 14:39 bogus
2008-04-23 14:39 bogus
2008-04-23 14:39 bogus
2008-04-23 14:39 bogus
2008-04-23 14:39 bogus
2008-04-23 14:39 bogus
2008-04-23 14:39 bogus
2008-04-23 14:39 bogus
2008-04-23 14:39 bogus
2008-03-17 22:01 bogus
2007-12-01  7:52 bogus
2007-12-01  7:52 bogus
2007-10-06 20:13 bogus
2007-10-06 20:13 bogus
2007-10-06 20:13 bogus
2007-07-23 18:04 bogus
2007-07-23 18:04 bogus
2007-06-23 20:07 bogus
2007-02-14  8:32 bogus
2007-02-14  8:32 bogus
2007-02-14  8:32 bogus
2007-02-06  7:08 bogus
2007-02-06  7:08 bogus
2007-02-06  7:08 bogus
2007-02-06  7:08 bogus
2007-02-01  7:54 kou.ishizaki
2007-02-04  4:37 ` No Subject Benjamin Herrenschmidt
2006-10-09 23:13 (no subject) albox
2006-10-09 23:31 ` No Subject Tobin Davis
2006-08-17  1:58 No subject bogus
2006-08-17  1:58 bogus
2006-08-17  1:58 bogus
2006-08-17  1:58 bogus
2006-08-17  1:58 bogus
2006-08-17  1:58 bogus
2006-08-17  1:58 bogus
     [not found] <Pine.LNX.4.33.0111200151170.1364-100000@home.apu.edu>
2005-05-19  6:23 ` SACAH
2005-05-19  6:23 ` Chen, Zhen Y (Zhen)
2005-05-19  6:23 ` Gyimesi Attila
2005-05-19  6:23 ` Minesh Khatri
2005-05-19  6:24 ` Bryan Call
2005-05-19  6:24 ` Kirby Dotson
2005-05-19  6:24 ` Zaffar Khalid
2005-05-19  6:24 ` cst01074
2005-05-19  6:24 ` spreckel
2005-05-19  6:24 ` jmp
2005-05-19  6:25 ` no subject firase kaled
2005-05-19  6:25 ` No subject andreas
2005-05-19  6:25 ` Rudolf Marek
2005-05-19  6:25 ` Tomáš Thiemel
2004-12-14 16:49 Andi Kleen
2004-12-15 23:50 ` No Subject Alan Cox
2004-07-16 16:54 Hermann Gottschalk
2004-07-16 16:59 ` No Subject Jesse Stockall
2004-02-22 17:51 redzic fadil
2004-02-22 20:54 ` No Subject Ludootje
     [not found] <Pine.GSO.4.58.0401251223440.20527@waterleaf.sonytel.be>
2004-01-25 13:02 ` Benjamin Herrenschmidt
2003-02-21 13:43 News Admin
2003-02-21 15:01 ` No Subject Alan Cox
2002-08-05 13:08 Christos Kartsaklis
2002-08-05 14:53 ` No Subject Alan Cox
2002-08-03 19:26 Pawel Kot
2002-08-03 21:45 ` No Subject Alan Cox
2002-08-03 21:58   ` Bartlomiej Zolnierkiewicz
2002-08-03 22:16     ` Bartlomiej Zolnierkiewicz
2002-08-03 23:38       ` Alan Cox
2002-08-03 22:53         ` Bartlomiej Zolnierkiewicz
2002-08-04 13:28           ` Henning P. Schmiedehausen
2002-08-04 15:40             ` Daniela Engert
2002-08-03 23:27         ` Petr Vandrovec
2001-08-24 22:16 abraxas2
2000-11-19 20:02 jingai

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.