* [LARTC] RE: Contents of LARTC digest, Vol 1 #282 - 4 msgs
@ 2001-10-01 11:25 David
0 siblings, 0 replies; only message in thread
From: David @ 2001-10-01 11:25 UTC (permalink / raw)
To: lartc
[-- Attachment #1: Type: text/plain, Size: 1418 bytes --]
As far as I know, the cable modems each share the same bandwidth. They
would also share the same subnet, so if one link goes down, wouldn't
they both be down? I can't see using more than 1 modem for each coaxial
line.
Chris.
David wrote:
> Here is the setup I have. I have 3 network cards in my linux machine.
> 1 network card (eth0) goes to my internet network (192.168.0.0).
> Network Card 2 (eth1) and Network Card 3(eth2) go to the internet via
> 2 cable modems whose address is determined by dhcp. I can get either
> cable modem to work alone but I can't get them to work together. I
> would really like to be able to combine the 2 into 1 and have it
> detect a bad link as well in case i have to unplug 1 cable modem.
>
>
>
> Thanks!
>
> David
> maniacdavid@cableone.net
>
>
>
I am using 2 different cable modems because there are 2 different people
paying of them. The way our cable system is set up is that 2 separate cable
modems combined together ($50 each) will be faster than the cable company's
$100 package. And yes, they would both go down at the same time. But for
future reference, it would be nice if I could have it detect when 1 goes
down (like unplugging it) because later I will be combining a DSL and a
cable. Im trying to get this teql thing (tc qdisc,etc.) to work but now that
Im reading about it seems like I would have to access to both sides.
Thanks
David
maniacdavid@cableone.net
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-10-01 11:25 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-10-01 11:25 [LARTC] RE: Contents of LARTC digest, Vol 1 #282 - 4 msgs David
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.