From: mok2 <mok2@armageddonnet.com>
To: lartc@vger.kernel.org
Subject: [LARTC] Nano.Txt with PPP
Date: Tue, 18 Dec 2001 18:15:45 +0000 [thread overview]
Message-ID: <marc-lartc-100870317321113@msgid-missing> (raw)
Abbreviations:
IFI internal interface
IPI IP address of internal interface
NMI netmask for the internal interface
IFE1, IFE2 external interfaces
IPE1, IPE2 external IP address
NWE1, NWE2 external network address
NME1, NME2 mask for the external network (number of bits, like in /24)
BRD1, BRD2 broadcast address for external network
GWE1, GWE2 gateway for external interface
I am tyring to setup a gw with a cable modem and a dialup connection.
Following the nano.txt, i cant figure out how to define ppp0
ppp0 Link encap:Point-to-Point Protocol
inet addr:166.50.32.206 P-t-P:166.50.32.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:4 errors:2 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:40 (40.0 b) TX bytes:92 (92.0 b)
since there is no broadcast or network address that i can tell.
what do i put for these variables..
thx
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
next reply other threads:[~2001-12-18 18:15 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-12-18 18:15 mok2 [this message]
2001-12-18 19:00 ` [LARTC] Nano.Txt with PPP mok2
2001-12-18 19:27 ` mok2
2001-12-18 19:39 ` Christoph Simon
2001-12-18 20:06 ` mok2
2001-12-18 20:14 ` Christoph Simon
2001-12-18 20:21 ` mok2
2001-12-18 20:43 ` Christoph Simon
2001-12-18 21:20 ` Christoph Simon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-100870317321113@msgid-missing \
--to=mok2@armageddonnet.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.