From: mok2 <mok2@armageddonnet.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Nano.Txt with PPP
Date: Tue, 18 Dec 2001 19:27:20 +0000 [thread overview]
Message-ID: <marc-lartc-100870749000550@msgid-missing> (raw)
In-Reply-To: <marc-lartc-100870317321113@msgid-missing>
Destination Gateway Genmask Flags Metric Ref Use Iface
166.50.32.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
176.30.3.192 0.0.0.0 255.255.255.192 U 0 0 0 eth2
10.2.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 176.30.3.193 0.0.0.0 UG 0 0 0 eth2
eth2 Link encap:Ethernet HWaddr
inet addr:176.30.3.38 Bcast:176.30.3.255 Mask:255.255.255.192
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:98373 errors:0 dropped:0 overruns:0 frame:0
TX packets:116675 errors:0 dropped:0 overruns:0 carrier:0
collisions:1015
RX bytes:76086367 (72.5 Mb) TX bytes:97127829 (92.6 Mb)
ppp0 Link encap:Point-to-Point Protocol
inet addr:166.50.33.32 P-t-P:166.50.32.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:4 errors:1 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:40 (40.0 b) TX bytes:61 (61.0 b)
the gw with the lowest metric determines which connection will work..
i cannot add in both gw and make both connections work at the same time..
that is my problem..
On Tue, 18 Dec 2001, Christoph Simon wrote:
> On Tue, 18 Dec 2001 14:00:06 -0500 (EST)
> mok2 <mok2@armageddonnet.com> wrote:
>
> >
> > I am not tyring to route outbound traffice through ppp0 just recieve
> > traffic on that interface.
> > while still being connected to my cable provider..
> >
> > and yes i have a dynamic ip on ppp0 and a static for my cable..
>
> In that case, I'm not sure to understand your problem. You are not
> going to have any multipath route; it a standard setup.
>
> --
> Christoph Simon
> ciccio@kiosknet.com.br
> ---
> ^X^C
> q
> quit
> :q
> ^C
> end
> x
> exit
> ZZ
> ^D
> ?
> help
> .
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
next prev parent reply other threads:[~2001-12-18 19:27 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-12-18 18:15 [LARTC] Nano.Txt with PPP mok2
2001-12-18 19:00 ` mok2
2001-12-18 19:27 ` mok2 [this message]
2001-12-18 19:39 ` Christoph Simon
2001-12-18 20:06 ` mok2
2001-12-18 20:14 ` Christoph Simon
2001-12-18 20:21 ` mok2
2001-12-18 20:43 ` Christoph Simon
2001-12-18 21:20 ` Christoph Simon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-100870749000550@msgid-missing \
--to=mok2@armageddonnet.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.