[LARTC] Police to xxx mbit with port range

[LARTC] Police to xxx mbit with port range

[Mark beck]

Hi,

I want to POLICE to a certain bw in one direction only - over a range of 
500 ports.  Is this possible and if so could someone please give me some 
pointers to the configuration and any Kernel requirements necessary.

Many thanks,
Mark


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

Re: [LARTC] Police to xxx mbit with port range

[Stef Coene]

On Sunday 10 February 2002 23:25, Mark beck wrote:
> Hi,
>
> I want to POLICE to a certain bw in one direction only - over a range of
> 500 ports.  Is this possible and if so could someone please give me some
> pointers to the configuration and any Kernel requirements necessary.
RTFM : http://ds9a.nl/2.4Routing/HOWTO/cvs/2.4routing/output/2.4routing.html

Stef


-- 

stef.coene@docum.org
 More QOS info : http://www.docum.org/
 Title : "Using Linux as bandwidth manager"
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

Re: [LARTC] Police to xxx mbit with port range

[Mark Beck]

Oh so helpful!

In the howto it only mentions how to do this on a single port basis - and I 
cant find TC documentation:

# tc filter add dev eth0 protocol ip parent 10: prio 1 u32 match ip sport 
80 0xffff flowid 10:1

I assume after the 80 we have a hex mask, so would the following match 
ports 10240->10751?

# tc filter add dev eth0 protocol ip parent 10: prio 1 u32 match ip sport 
10240 0x200 flowid 10:1

Thanks in advance,
Mark


At 11:04 11/02/2002 +0100, Stef Coene wrote:
>On Sunday 10 February 2002 23:25, Mark beck wrote:
> > Hi,
> >
> > I want to POLICE to a certain bw in one direction only - over a range of
> > 500 ports.  Is this possible and if so could someone please give me some
> > pointers to the configuration and any Kernel requirements necessary.
>RTFM : http://ds9a.nl/2.4Routing/HOWTO/cvs/2.4routing/output/2.4routing.html
>
>Stef
>
>
>--
>
>stef.coene@docum.org
>  More QOS info : http://www.docum.org/
>  Title : "Using Linux as bandwidth manager"



_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

Re: [LARTC] Police to xxx mbit with port range

[Stef Coene]

On Monday 11 February 2002 23:32, Mark Beck wrote:
> Oh so helpful!
>
> In the howto it only mentions how to do this on a single port basis - and I
> cant find TC documentation:
>
> # tc filter add dev eth0 protocol ip parent 10: prio 1 u32 match ip sport
> 80 0xffff flowid 10:1
>
> I assume after the 80 we have a hex mask, so would the following match
> ports 10240->10751?
>
> # tc filter add dev eth0 protocol ip parent 10: prio 1 u32 match ip sport
> 10240 0x200 flowid 10:1
Goog guess :-)  But I never tried it myself.


Stef

-- 

stef.coene@docum.org
 More QOS info : http://www.docum.org/
 Title : "Using Linux as bandwidth manager"
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/