Re: [LARTC] Hosting script

["Charles Williams" <chuck@slydder.homelinux.com>]

----- Original Message -----
From: "Charles Williams" <chuck@slydder.homelinux.com>
To: "Stef Coene" <stef.coene@docum.org>; <lartc@mailman.ds9a.nl>
Sent: Sunday, March 31, 2002 8:57 PM
Subject: Re: [LARTC] Hosting script


>
> ----- Original Message -----
> From: "Stef Coene" <stef.coene@docum.org>
> To: "Charles Williams" <chuck@slydder.homelinux.com>;
> <lartc@mailman.ds9a.nl>
> Sent: Saturday, January 05, 1980 4:41 AM
> Subject: Re: [LARTC] Hosting script
>
>
> >> >remark 3 : weight 1 is very low for the classes
> >Calculate the weight from the rate : weight = rate / 10.

Also, is the formula meant for Kbit or Mbit rates?  I would imagine Mbit.

chuck

> >
> >But what do you want to do with the scipt?  There is already a cbq-script
> >configuration : http://freshmeat.net/projects/cbq.init/
> >
> >Stef
>
> Stef,
>
> This is for a hosting company data center (maybe) and will be controlling
> the entire bandwidth for the 34Mbps line for that section of the data
> center.
>
> Also, thanks for the link to the script.  I'll take a look at it later.  I
> wanted to make sure I had this down without the script before hand though
so
> that I KNOW what's going on.
>
> thanks,
> chuck
>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/