Re: [LARTC] help, i want 10 mbps to my router

[George Tsuladze <gio@ultracom.ge>]

Stef Coene wrote:

>>gio: i have to use iptables?
>>
>Or 2 u32 filters : first filter matches local traffic, second filter matches 
>all traffic.  The second filter will never be used for the local traffic.
>
>Stef
>
tc qdisc del dev eth0 root
#eht0 rules
tc qdisc add dev eth0 root handle 1: htb default 12
#shape interface eth0
tc class add dev eth0 parent 1: classid 1:1 htb rate 10mbit ceil 10mbit 
burst 2k
#Internet
tc class add dev eth0 parent 1:1 classid 1:11 htb rate 500kbit ceil 
500kbit burst 2k
#Lan
tc class add dev eth0 parent 1:1 classid 1:12 htb rate 10mbit ceil 
10mbit burst 2k
#mark Internet class
tc filter add dev eth0 parent 1: protocol ip prio 3 handle 1 fw classid 1:11
#add qdisc discipline Lan
tc qdisc add dev eth0 parent 1:12 handle 32: sfq perturb 10
#add qdisc discipline Internet
tc qdisc add dev eth0 parent 1:11 handle 41: sfq perturb 10
###################################################################################
#fitler marks by iptables
#iptables output
iptables -F -t mangle
#Mark Internet traffic
iptables -A OUTPUT -t mangle -d $myip  -j MARK --set-mark 1

with this rule it shapes traffic for marked ip and gives all other 10 mbit

but i do not want this,
iptables -A OUTPUT -t mangle -d $myip  -s ! $routerip -j MARK --set-mark 1

it does not shapes internet traffic, it gaves 10mbit to all.

i am downloading from internet without shaping, note i am downloading 
through the SQUID which is running on router.



_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/