Re: [LARTC] help, i want 10 mbps to my router

[George Tsuladze <gio@ultracom.ge>]

George Tsuladze wrote:

> tc qdisc del dev eth0 root
> #eht0 rules
> tc qdisc add dev eth0 root handle 1: htb default 12
> #shape interface eth0
> tc class add dev eth0 parent 1: classid 1:1 htb rate 10mbit ceil 
> 10mbit burst 2k
> #Internet
> tc class add dev eth0 parent 1:1 classid 1:11 htb rate 500kbit ceil 
> 500kbit burst 2k
> #Lan
> tc class add dev eth0 parent 1:1 classid 1:12 htb rate 10mbit ceil 
> 10mbit burst 2k
> #mark Internet class
> tc filter add dev eth0 parent 1: protocol ip prio 3 handle 1 fw 
> classid 1:11
> #add qdisc discipline Lan
> tc qdisc add dev eth0 parent 1:12 handle 32: sfq perturb 10
> #add qdisc discipline Internet
> tc qdisc add dev eth0 parent 1:11 handle 41: sfq perturb 10
> ################################################################################### 
>
> #fitler marks by iptables
> #iptables output
> iptables -F -t mangle
> #Mark Internet traffic
> iptables -A OUTPUT -t mangle -d $myip  -j MARK --set-mark 1
>
> with this rule it shapes traffic for marked ip and gives all other 10 
> mbit
>
> but i do not want this,
> iptables -A OUTPUT -t mangle -d $myip  -s ! $routerip -j MARK 
> --set-mark 1
>
> it does not shapes internet traffic, it gaves 10mbit to all.
>
> i am downloading from internet without shaping, note i am downloading 
> through the SQUID which is running on router.
>
>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
> .
> Were i am doing wrong?




_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/