[LARTC] New IMQ device available

[LARTC] New IMQ device available

[Patrick McHardy]

Hi!

I've completed a pre-release of the new IMQ device.
Changes include:
 - Multiple IMQ devices
 - Selection of what gets queued to which device is done using an iptables
   target, nothing gets queued be default
 - Ingress support (egress qdiscs can be used for ingress traffic control!)
 - Possible to build as a module

Sources and somewhat confuse instructions can be found at http://luxik.cdi.cz/~patrick/imq .

Bye,
Patrick

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] New IMQ device available

[Martin Devera]

good work ;) Please change Devara=>Devera .. I also
changed original page http://luxik.cdi.cz/~devik/qos/imq.htm
to mention your new one at beginning.

Also why there are four imqs ? I can't find way how to
direct packet to partiticular one ....
devik

On Thu, 4 Apr 2002, Patrick McHardy wrote:

> Hi!
> 
> I've completed a pre-release of the new IMQ device.
> Changes include:
>  - Multiple IMQ devices
>  - Selection of what gets queued to which device is done using an iptables
>    target, nothing gets queued be default
>  - Ingress support (egress qdiscs can be used for ingress traffic control!)
>  - Possible to build as a module
> 
> Sources and somewhat confuse instructions can be found at http://luxik.cdi.cz/~patrick/imq .
> 
> Bye,
> Patrick
> 
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
> 
> 

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] New IMQ device available

[Patrick McHardy]

Oops, forgot to reply to the list.

On Thu, 4 Apr 2002, Martin Devera wrote:

> Also why there are four imqs ? I can't find way how to
> direct packet to partiticular one ....

The IMQ iptables target has an option --todev to specify
to which imq device a packet should go. if it's not specified
it defaults to 0.

Bye Patrick

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] New IMQ device available

[Julián Muñoz]

>  - Ingress support (egress qdiscs can be used for ingress traffic control!)

Ehhhhhh, I can't believe it !!
Yahgooooooooo

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/