All of lore.kernel.org
 help / color / mirror / Atom feed
* [LARTC] Installation Problem
@ 2002-05-17 15:50 Justin Owens
  2002-05-17 20:43 ` Martin Devera
  0 siblings, 1 reply; 2+ messages in thread
From: Justin Owens @ 2002-05-17 15:50 UTC (permalink / raw)
  To: lartc

Hi,

Could someone send me a dump of what options I need configured in a 2.4.18
kernel to get htb3.3 to work.

At present I am getting the following error:

[root@htb src]# tc qdisc add dev eth1 root handle 1: htb default 12
RTNETLINK answers: Invalid argument
[root@htb src]#

Alternatively any other suggestions would be welcome.

Regards

Justin Owens


The information contained in this email is privileged and confidential, intended only for the use of the individual or entity to whom it is addressed. If the reader of this email is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this email is strictly prohibited. If you have received this email in error, please notify the sender immediately by email and delete this email. Any views expressed in this email are those of the individual sender unless the sender specifically states 
This mail was virus scanned by SurfControl.


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [LARTC] Installation Problem
  2002-05-17 15:50 [LARTC] Installation Problem Justin Owens
@ 2002-05-17 20:43 ` Martin Devera
  0 siblings, 0 replies; 2+ messages in thread
From: Martin Devera @ 2002-05-17 20:43 UTC (permalink / raw)
  To: lartc

You have to enable QoS and HTB in "make menuconfig". If you
then set HTB up as module you have to insmod it of course.
The error bellow seems  like if you have no htb compiled
or loaded into kernel.
devik

On Fri, 17 May 2002, Justin Owens wrote:

> Hi,
>
> Could someone send me a dump of what options I need configured in a 2.4.18
> kernel to get htb3.3 to work.
>
> At present I am getting the following error:
>
> [root@htb src]# tc qdisc add dev eth1 root handle 1: htb default 12
> RTNETLINK answers: Invalid argument
> [root@htb src]#
>
> Alternatively any other suggestions would be welcome.
>
> Regards
>
> Justin Owens
>
>
> The information contained in this email is privileged and confidential, intended only for the use of the individual or entity to whom it is addressed. If the reader of this email is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this email is strictly prohibited. If you have received this email in error, please notify the sender immediately by email and delete this email. Any views expressed in this email are those of the individual sender unless the sender specifically states
> This mail was virus scanned by SurfControl.
>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2002-05-17 20:43 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-05-17 15:50 [LARTC] Installation Problem Justin Owens
2002-05-17 20:43 ` Martin Devera

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.