* [LARTC] U32 classifier filter
@ 2002-06-08 13:43 Kim Oppalfens
2002-06-08 14:43 ` Alexey Talikov
0 siblings, 1 reply; 2+ messages in thread
From: Kim Oppalfens @ 2002-06-08 13:43 UTC (permalink / raw)
To: lartc
Hi,
I don't really know if this is the correct list for asking this, if not a
referral to the correct list would
be very much appreciated.
Ok here it goes. I would like to create a u32 filter for tcp packets that
are larger then 1480 bytes
but I am not really sure how of if this can be done. I know about the
pattern and mask thing but
I am not terribly familiar with the masking thing. I think my ip basics are
good enough though.
Second question I have is another rule I would like to create for packets
that are destined for the ports 441,412&413.
Can I create one rule for that or should I create 3 separate rules?
Last question accept for the linux advanced routing & traffic shaping how
to is there a place where I can get
more info & examples on the u32 classifier??
Thanks in advance
Kim
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [LARTC] U32 classifier filter
2002-06-08 13:43 [LARTC] U32 classifier filter Kim Oppalfens
@ 2002-06-08 14:43 ` Alexey Talikov
0 siblings, 0 replies; 2+ messages in thread
From: Alexey Talikov @ 2002-06-08 14:43 UTC (permalink / raw)
To: lartc
http://www.linux.net.pl/cbq/selector.html
and Advanced Routing HOWTO
08.06.2002 18:43:32, Kim Oppalfens <kimoppalfens@freegates.be> wrote:
>Hi,
>
>I don't really know if this is the correct list for asking this, if not a
>referral to the correct list would
>be very much appreciated.
>
>Ok here it goes. I would like to create a u32 filter for tcp packets that
>are larger then 1480 bytes
>but I am not really sure how of if this can be done. I know about the
>pattern and mask thing but
>I am not terribly familiar with the masking thing. I think my ip basics are
>good enough though.
>
>Second question I have is another rule I would like to create for packets
>that are destined for the ports 441,412&413.
>Can I create one rule for that or should I create 3 separate rules?
>
>Last question accept for the linux advanced routing & traffic shaping how
>to is there a place where I can get
>more info & examples on the u32 classifier??
>
>Thanks in advance
>Kim
>
>_______________________________________________
>LARTC mailing list / LARTC@mailman.ds9a.nl
>http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
-----------------------------------
mailto:alexey_talikov@texlab.com.uz
BR
Alexey Talikov
FORTEK
-----------------------------------
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-06-08 14:43 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-06-08 13:43 [LARTC] U32 classifier filter Kim Oppalfens
2002-06-08 14:43 ` Alexey Talikov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.