[LARTC] Two adapter, One IP address

[LARTC] Two adapter, One IP address

[shen jing]

Hi,

I have a question,  is it possible to assign one IP address to two
ntework adapter installed on the same Linux box?
Must we use NAT at gateway to enable such a reduant configuation?


Thanks a lot.

Jing



_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] Two adapter, One IP address

[Christian Hammers]

On Thu, Aug 01, 2002 at 06:15:22PM +0800, shen jing wrote:
> I have a question,  is it possible to assign one IP address to two
> ntework adapter installed on the same Linux box?
Would the bonding driver support (kernel/network options) be an option
for you?

bye,

-christian-

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] Two adapter, One IP address

[Stef Coene]

On Thursday 01 August 2002 12:15, shen jing wrote:
> Hi,
>
> I have a question,  is it possible to assign one IP address to two
> ntework adapter installed on the same Linux box?
It's possible.

> Must we use NAT at gateway to enable such a reduant configuation?
If you want to read some about it, you can read the paper called "Some evil ideas about decentralised loadbalancing/clustering, with no 
single point of failure " on www.ds9a.nl.

Stef

-- 

stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/