* Re: [LARTC] An example of prio qdisc please...
2002-09-24 15:50 [LARTC] An example of prio qdisc please Emmanuel Lacour
@ 2002-09-25 7:28 ` Soulfly
2002-09-25 9:18 ` Emmanuel Lacour
` (7 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Soulfly @ 2002-09-25 7:28 UTC (permalink / raw)
To: lartc
tc qdisc add dev eth0 root handle 1: prio bands 5 priomap 2 3 2 2 3 3 3 3 1
1 1 1 2 2 2 2
tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10
tc qdisc add dev eth0 parent 1:2 handle 20: sfq perturb 10
tc qdisc add dev eth0 parent 1:3 handle 30: sfq perturb 10
tc qdisc add dev eth0 parent 1:4 handle 40: sfq perturb 10
tc filter add dev eth0 protocol ip parent 1: prio 10 u32 match ip protocol
0xXX 0xff flowid 1:1
have you read the docs? If not, do so to understand how it works and what
the quirks are. http://www.lartc.org/
----- Original Message -----
From: "Emmanuel Lacour" <elacour@easter-eggs.com>
To: <lartc@mailman.ds9a.nl>
Sent: Tuesday, September 24, 2002 5:50 PM
Subject: [LARTC] An example of prio qdisc please...
> I simply wan't to give higher priority for esp protocol.
>
> Could someone give me an example (I think using prio qdisc and u32
> filter???)
>
>
>
> --
> Easter-eggs Spécialiste GNU/Linux
> 44-46 rue de l'Ouest - 75014 Paris - France - Métro Gaité
> Phone: +33 (0) 1 43 35 00 37 - Fax: +33 (0) 1 41 35 00 76
> mailto:elacour@easter-eggs.com - http://www.easter-eggs.com
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [LARTC] An example of prio qdisc please...
2002-09-24 15:50 [LARTC] An example of prio qdisc please Emmanuel Lacour
2002-09-25 7:28 ` Soulfly
@ 2002-09-25 9:18 ` Emmanuel Lacour
2002-09-25 9:51 ` Rohan Almeida
` (6 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Emmanuel Lacour @ 2002-09-25 9:18 UTC (permalink / raw)
To: lartc
On Wed, Sep 25, 2002 at 09:28:28AM +0200, Soulfly wrote:
> tc qdisc add dev eth0 root handle 1: prio bands 5 priomap 2 3 2 2 3 3 3 3 1
> 1 1 1 2 2 2 2
> tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10
> tc qdisc add dev eth0 parent 1:2 handle 20: sfq perturb 10
> tc qdisc add dev eth0 parent 1:3 handle 30: sfq perturb 10
> tc qdisc add dev eth0 parent 1:4 handle 40: sfq perturb 10
> tc filter add dev eth0 protocol ip parent 1: prio 10 u32 match ip protocol
> 0xXX 0xff flowid 1:1
>
> have you read the docs? If not, do so to understand how it works and what
> the quirks are. http://www.lartc.org/
>
>
Of course, I did it already, the lartc howto is a really good doc, but
all of this is not really easy so by giving me this example I will be
able to understand more and do what I wan't.
Thanks!
--
Easter-eggs Spécialiste GNU/Linux
44-46 rue de l'Ouest - 75014 Paris - France - Métro Gaité
Phone: +33 (0) 1 43 35 00 37 - Fax: +33 (0) 1 41 35 00 76
mailto:elacour@easter-eggs.com - http://www.easter-eggs.com
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [LARTC] An example of prio qdisc please...
2002-09-24 15:50 [LARTC] An example of prio qdisc please Emmanuel Lacour
2002-09-25 7:28 ` Soulfly
2002-09-25 9:18 ` Emmanuel Lacour
@ 2002-09-25 9:51 ` Rohan Almeida
2002-09-25 10:45 ` Soulfly
` (5 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Rohan Almeida @ 2002-09-25 9:51 UTC (permalink / raw)
To: lartc
"Soulfly" <zob_soulfly@hotmail.com> thus wrote:
> tc qdisc add dev eth0 root handle 1: prio bands 5 priomap 2 3 2 2 3 3 3 3 1
> 1 1 1 2 2 2 2
> tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10
> tc qdisc add dev eth0 parent 1:2 handle 20: sfq perturb 10
> tc qdisc add dev eth0 parent 1:3 handle 30: sfq perturb 10
> tc qdisc add dev eth0 parent 1:4 handle 40: sfq perturb 10
> tc filter add dev eth0 protocol ip parent 1: prio 10 u32 match ip protocol
> 0xXX 0xff flowid 1:1
Hi there
This is ver infornmative
I've long wanted priority of some protocol over the other.
Now my question is:
Can i use this with htb?
I want:
o ip 172.16.0.5 bandwidth restriction of 32 kbps (htb ceil)
o ip 172.16.0.49 bandwidth restriction of 64 kbps (htb ceil)
o protocol 23 priority over protocol 80
U see, I don't want to limit "protocol 80" to some bandwidth
restriction so that "protocol 23" gets the rest available bandwidth
I just want "proto 23" packets priority over "proto 80"
In the above example u used the "prio" qdisc
Can i use this with my htb as the roo qdisc and prio
lower down in the class?
Thanx
--
arc_of_descent
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [LARTC] An example of prio qdisc please...
2002-09-24 15:50 [LARTC] An example of prio qdisc please Emmanuel Lacour
` (2 preceding siblings ...)
2002-09-25 9:51 ` Rohan Almeida
@ 2002-09-25 10:45 ` Soulfly
2002-09-25 11:02 ` Soulfly
` (4 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Soulfly @ 2002-09-25 10:45 UTC (permalink / raw)
To: lartc
I'm happy to help! I just want to make sure you've know the basics so you
don't fall into pitholes. Examples is one of the best sources of
information.
Oh I didn't look up the number for your protocol, so exchange the 'XX' with
this.
----- Original Message -----
From: "Emmanuel Lacour" <elacour@easter-eggs.com>
To: "Soulfly" <zob_soulfly@hotmail.com>
Cc: <lartc@mailman.ds9a.nl>
Sent: Wednesday, September 25, 2002 11:18 AM
Subject: Re: [LARTC] An example of prio qdisc please...
> On Wed, Sep 25, 2002 at 09:28:28AM +0200, Soulfly wrote:
> > tc qdisc add dev eth0 root handle 1: prio bands 5 priomap 2 3 2 2 3 3 3
3 1
> > 1 1 1 2 2 2 2
> > tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10
> > tc qdisc add dev eth0 parent 1:2 handle 20: sfq perturb 10
> > tc qdisc add dev eth0 parent 1:3 handle 30: sfq perturb 10
> > tc qdisc add dev eth0 parent 1:4 handle 40: sfq perturb 10
> > tc filter add dev eth0 protocol ip parent 1: prio 10 u32 match ip
protocol
> > 0xXX 0xff flowid 1:1
> >
> > have you read the docs? If not, do so to understand how it works and
what
> > the quirks are. http://www.lartc.org/
> >
> >
>
> Of course, I did it already, the lartc howto is a really good doc, but
> all of this is not really easy so by giving me this example I will be
> able to understand more and do what I wan't.
>
> Thanks!
>
> --
> Easter-eggs Spécialiste GNU/Linux
> 44-46 rue de l'Ouest - 75014 Paris - France - Métro Gaité
> Phone: +33 (0) 1 43 35 00 37 - Fax: +33 (0) 1 41 35 00 76
> mailto:elacour@easter-eggs.com - http://www.easter-eggs.com
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [LARTC] An example of prio qdisc please...
2002-09-24 15:50 [LARTC] An example of prio qdisc please Emmanuel Lacour
` (3 preceding siblings ...)
2002-09-25 10:45 ` Soulfly
@ 2002-09-25 11:02 ` Soulfly
2002-09-25 11:44 ` Stef Coene
` (3 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Soulfly @ 2002-09-25 11:02 UTC (permalink / raw)
To: lartc
> "Soulfly" <zob_soulfly@hotmail.com> thus wrote:
>
> > tc qdisc add dev eth0 root handle 1: prio bands 5 priomap 2 3 2 2 3 3 3
3 1
> > 1 1 1 2 2 2 2
> > tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10
> > tc qdisc add dev eth0 parent 1:2 handle 20: sfq perturb 10
> > tc qdisc add dev eth0 parent 1:3 handle 30: sfq perturb 10
> > tc qdisc add dev eth0 parent 1:4 handle 40: sfq perturb 10
> > tc filter add dev eth0 protocol ip parent 1: prio 10 u32 match ip
protocol
> > 0xXX 0xff flowid 1:1
>
I have a configuration which use 5 prio levels (2 above the standard
priolevels). I conerted it to 4 and forgot to alter the band parameter.. so
the correct line is..
tc qdisc add dev eth0 root handle 1: prio bands 4 priomap 2 3 2 2 3 3 3 3 1
1 1 1 2 2 2 2
> Hi there
> This is ver infornmative
> I've long wanted priority of some protocol over the other.
> Now my question is:
> Can i use this with htb?
>
> I want:
> o ip 172.16.0.5 bandwidth restriction of 32 kbps (htb ceil)
> o ip 172.16.0.49 bandwidth restriction of 64 kbps (htb ceil)
> o protocol 23 priority over protocol 80
>
> U see, I don't want to limit "protocol 80" to some bandwidth
> restriction so that "protocol 23" gets the rest available bandwidth
> I just want "proto 23" packets priority over "proto 80"
>
> In the above example u used the "prio" qdisc
> Can i use this with my htb as the roo qdisc and prio
> lower down in the class?
>
Yes, this should work out well. I suggest you add prio qdisc to the leafs in
your htb class-tree.
> Thanx
>
no problem
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [LARTC] An example of prio qdisc please...
2002-09-24 15:50 [LARTC] An example of prio qdisc please Emmanuel Lacour
` (4 preceding siblings ...)
2002-09-25 11:02 ` Soulfly
@ 2002-09-25 11:44 ` Stef Coene
2002-09-25 14:13 ` Tobias Geiger
` (2 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Stef Coene @ 2002-09-25 11:44 UTC (permalink / raw)
To: lartc
On Wednesday 25 September 2002 11:39, Rohan Almeida wrote:
> "Soulfly" <zob_soulfly@hotmail.com> thus wrote:
> > tc qdisc add dev eth0 root handle 1: prio bands 5 priomap 2 3 2 2 3 3 3 3
> > 1 1 1 1 2 2 2 2
> > tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10
> > tc qdisc add dev eth0 parent 1:2 handle 20: sfq perturb 10
> > tc qdisc add dev eth0 parent 1:3 handle 30: sfq perturb 10
> > tc qdisc add dev eth0 parent 1:4 handle 40: sfq perturb 10
> > tc filter add dev eth0 protocol ip parent 1: prio 10 u32 match ip
> > protocol 0xXX 0xff flowid 1:1
>
> Hi there
> This is ver infornmative
> I've long wanted priority of some protocol over the other.
> Now my question is:
> Can i use this with htb?
>
> I want:
> o ip 172.16.0.5 bandwidth restriction of 32 kbps (htb ceil)
> o ip 172.16.0.49 bandwidth restriction of 64 kbps (htb ceil)
> o protocol 23 priority over protocol 80
>
> U see, I don't want to limit "protocol 80" to some bandwidth
> restriction so that "protocol 23" gets the rest available bandwidth
> I just want "proto 23" packets priority over "proto 80"
>
> In the above example u used the "prio" qdisc
> Can i use this with my htb as the roo qdisc and prio
> lower down in the class?
Yes, you can add the prio qdisc on a htb class.
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [LARTC] An example of prio qdisc please...
2002-09-24 15:50 [LARTC] An example of prio qdisc please Emmanuel Lacour
` (5 preceding siblings ...)
2002-09-25 11:44 ` Stef Coene
@ 2002-09-25 14:13 ` Tobias Geiger
2002-09-25 15:42 ` Stef Coene
2002-09-26 9:52 ` Emmanuel Lacour
8 siblings, 0 replies; 10+ messages in thread
From: Tobias Geiger @ 2002-09-25 14:13 UTC (permalink / raw)
To: lartc
correct me if im wrong, but couldn't u achieve the same goal only with htb?
i mean by creating a leave-level with classes rate^[ps, ceil=maxbw, prio 0-6
and attaching sfq/pfifo as leave-qdiscs to these classes?
s.th. like:
tc qdisc root handle 1:0 htb
tc class parent 1:0 handle 1:1 rate <maxuploadbw>
tc class parent 1:1 handle 1:10 rate 1bps ceil <maxuploadbw> prio 0
tc class parent 1:1 handle 1:11 rate .... ... .. prio 1
and so on
tc qdisc parent 1:10 handle 10:0 pfifo/sfq
tc qdisc parent 1:11 handle 11:0 ....
and so on
tc filter 1:0 protocol ip prio 0 handle 9999 fw classid 1:10
(syntax is not correct :)
and/or other filters
doesn't do this setup the same as the priomap (in general)?
Greetings
Tobias
> On Wednesday 25 September 2002 11:39, Rohan Almeida wrote:
>> "Soulfly" <zob_soulfly@hotmail.com> thus wrote:
>> > tc qdisc add dev eth0 root handle 1: prio bands 5 priomap 2 3 2 2 3
>> 3 3 3 1 1 1 1 2 2 2 2
>> > tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10
>> > tc qdisc add dev eth0 parent 1:2 handle 20: sfq perturb 10
>> > tc qdisc add dev eth0 parent 1:3 handle 30: sfq perturb 10
>> > tc qdisc add dev eth0 parent 1:4 handle 40: sfq perturb 10
>> > tc filter add dev eth0 protocol ip parent 1: prio 10 u32 match ip
>> protocol 0xXX 0xff flowid 1:1
>>
>> Hi there
>> This is ver infornmative
>> I've long wanted priority of some protocol over the other.
>> Now my question is:
>> Can i use this with htb?
>>
>> I want:
>> o ip 172.16.0.5 bandwidth restriction of 32 kbps (htb ceil)
>> o ip 172.16.0.49 bandwidth restriction of 64 kbps (htb ceil)
>> o protocol 23 priority over protocol 80
>>
>> U see, I don't want to limit "protocol 80" to some bandwidth
>> restriction so that "protocol 23" gets the rest available bandwidth I
>> just want "proto 23" packets priority over "proto 80"
>>
>> In the above example u used the "prio" qdisc
>> Can i use this with my htb as the roo qdisc and prio
>> lower down in the class?
> Yes, you can add the prio qdisc on a htb class.
>
> Stef
>
> --
>
> stef.coene@docum.org
> "Using Linux as bandwidth manager"
> http://www.docum.org/
> #lartc @ irc.oftc.net
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [LARTC] An example of prio qdisc please...
2002-09-24 15:50 [LARTC] An example of prio qdisc please Emmanuel Lacour
` (6 preceding siblings ...)
2002-09-25 14:13 ` Tobias Geiger
@ 2002-09-25 15:42 ` Stef Coene
2002-09-26 9:52 ` Emmanuel Lacour
8 siblings, 0 replies; 10+ messages in thread
From: Stef Coene @ 2002-09-25 15:42 UTC (permalink / raw)
To: lartc
On Wednesday 25 September 2002 16:13, Tobias Geiger wrote:
> correct me if im wrong, but couldn't u achieve the same goal only with htb?
>
> i mean by creating a leave-level with classes rate=1bps, ceil=maxbw, prio
> 0-6
>
> and attaching sfq/pfifo as leave-qdiscs to these classes?
Yes and it's even better. With cbq you can give the all classes a minimum
bandwidth so one class can not kill an other by using all bandwidth. With
prio, you can generate a lot of traffic in the highest band so the other
bands have no bandwidth left.
> s.th. like:
> tc qdisc root handle 1:0 htb
> tc class parent 1:0 handle 1:1 rate <maxuploadbw>
> tc class parent 1:1 handle 1:10 rate 1bps ceil <maxuploadbw> prio 0
> tc class parent 1:1 handle 1:11 rate .... ... .. prio 1
> and so on
> tc qdisc parent 1:10 handle 10:0 pfifo/sfq
> tc qdisc parent 1:11 handle 11:0 ....
> and so on
> tc filter 1:0 protocol ip prio 0 handle 9999 fw classid 1:10
> (syntax is not correct :)
> and/or other filters
>
> doesn't do this setup the same as the priomap (in general)?
It's not the same, but you can get the same result.
Remember, prio is only for excess bandidth. So each class will get's at least
his rate and the class with the lowest prio will get the remaining bandwidth.
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [LARTC] An example of prio qdisc please...
2002-09-24 15:50 [LARTC] An example of prio qdisc please Emmanuel Lacour
` (7 preceding siblings ...)
2002-09-25 15:42 ` Stef Coene
@ 2002-09-26 9:52 ` Emmanuel Lacour
8 siblings, 0 replies; 10+ messages in thread
From: Emmanuel Lacour @ 2002-09-26 9:52 UTC (permalink / raw)
To: lartc
On Wed, Sep 25, 2002 at 01:02:03PM +0200, Soulfly wrote:
> > "Soulfly" <zob_soulfly@hotmail.com> thus wrote:
> >
> > > tc qdisc add dev eth0 root handle 1: prio bands 5 priomap 2 3 2 2 3 3 3
> 3 1
> > > 1 1 1 2 2 2 2
> > > tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10
> > > tc qdisc add dev eth0 parent 1:2 handle 20: sfq perturb 10
> > > tc qdisc add dev eth0 parent 1:3 handle 30: sfq perturb 10
> > > tc qdisc add dev eth0 parent 1:4 handle 40: sfq perturb 10
> > > tc filter add dev eth0 protocol ip parent 1: prio 10 u32 match ip
> protocol
> > > 0xXX 0xff flowid 1:1
> >
>
> I have a configuration which use 5 prio levels (2 above the standard
> priolevels). I conerted it to 4 and forgot to alter the band parameter.. so
> the correct line is..
>
> tc qdisc add dev eth0 root handle 1: prio bands 4 priomap 2 3 2 2 3 3 3 3 1
> 1 1 1 2 2 2 2
>
Here is my net config:
LAN1->(eth1)ipsec_gw1(ppp0)---------------(ppp0)ipsec_gw2(eth1)<-LAN2
^
|
server
Ok, so I tried this:
tc qdisc del dev ppp0 root
tc qdisc add dev ppp0 root handle 1: prio
tc qdisc add dev ppp0 parent 1:1 handle 10: sfq perturb 10
tc qdisc add dev ppp0 parent 1:2 handle 20: sfq perturb 10
tc qdisc add dev ppp0 parent 1:3 handle 30: sfq perturb 10
tc filter add dev ppp0 protocol ip parent 1: prio 10 u32 match ip
protocol 0x50 0xff flowid 1:1
I did it on my too ipsec-end gateway
so if from I connect from LAN1 to LAN2 via ssh, all traffic go in 10:,
and when I ftp from LAN1 to the server directly through internet (no
tunnel), traffic go in 30:
But this doesn't change anything, ssh is as slow as without prio when I
do ftp????
Where is my probably qos conception error??
Thanks for any help.
--
Easter-eggs Spécialiste GNU/Linux
44-46 rue de l'Ouest - 75014 Paris - France - Métro Gaité
Phone: +33 (0) 1 43 35 00 37 - Fax: +33 (0) 1 41 35 00 76
mailto:elacour@easter-eggs.com - http://www.easter-eggs.com
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 10+ messages in thread