[LARTC] filtered gateway

[LARTC] filtered gateway

[htb]

Hi
I am trying to configure my linux box with 2.4.18 as a gateway/firewall for
 my public network. I don't know what rules I must use to accept incoming
 packets for other hosts with publics ips (like a router with filtering). Nat
 table is for masquerading only, where I configure these rules and how?
 topology:
ISP -> router -> linux box -> other hosts with public ip

thanks in advance.

-------------------------------------------------------

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] filtered gateway

[Stef Coene]

On Tuesday 01 October 2002 14:44, htb@cideweb.com wrote:
> Hi
> I am trying to configure my linux box with 2.4.18 as a gateway/firewall for
>  my public network. I don't know what rules I must use to accept incoming
>  packets for other hosts with publics ips (like a router with filtering).
> Nat table is for masquerading only, where I configure these rules and how?
> topology:
> ISP -> router -> linux box -> other hosts with public ip
If the routing is ok and you enabled ip forwarding, it should work.

Stef

-- 

stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/