[LARTC] kernel debugger for RH 7.3

[LARTC] kernel debugger for RH 7.3

[Daniel Sullivan]

Hi,
Can anyone recommend a kernel debugger for Red Hat 7.3 (kernel 2.4.18)? I
would like to step through the kernel and modules that perform traffic
control.

Thanks,
Dan

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] kernel debugger for RH 7.3

[Werner Almesberger]

Daniel Sullivan wrote:
> I would like to step through the kernel and modules that perform traffic
> control.

Depending on what you plan to do, you may find tcsim a more convenient
tool than a kernel debugger. tcsim runs most of the traffic control
subsystem in user space, so you can just use gdb or any other debugger.

tcsim is part of tcng, http://tcng.sourceforge.net/

- Werner

-- 
  _________________________________________________________________________
 / Werner Almesberger, Buenos Aires, Argentina         wa@almesberger.net /
/_http://www.almesberger.net/____________________________________________/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] kernel debugger for RH 7.3

[EGAL Vincent]

Daniel Sullivan wrote:

>Hi,
>Can anyone recommend a kernel debugger for Red Hat 7.3 (kernel 2.4.18)? I
>would like to step through the kernel and modules that perform traffic
>control.
>
>Thanks,
>Dan
>
>_______________________________________________
>LARTC mailing list / LARTC@mailman.ds9a.nl
>http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
>  
>
hi, you can use kgdb but you need two hosts, it works fine.


-- 
Vincent EGAL
Email : egal@ipanematech.com



_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/