* [LARTC] 答复: Re: [LARTC] help, HTB2 and filter ?
@ 2002-10-14 13:24 lihpc
2002-10-14 13:42 ` Martin Devera
0 siblings, 1 reply; 2+ messages in thread
From: lihpc @ 2002-10-14 13:24 UTC (permalink / raw)
To: lartc
>> BUT:
>>
>> tc filter add dev eth1 protocol ip parent 10:1 prio 1 handle 100 fw
>> classid 10:100
>>
>> OUTPUT : "RTNETLINK answers: Invaid argument"
>
>cls_fw is not loaded ? (quick guess only).
> devik
tc filter add dev eth1 protocol ip parent 10:1 prio 1 fw
can run !!
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [LARTC] 答复: Re: [LARTC] help, HTB2 and filter ?
2002-10-14 13:24 [LARTC] 答复: Re: [LARTC] help, HTB2 and filter ? lihpc
@ 2002-10-14 13:42 ` Martin Devera
0 siblings, 0 replies; 2+ messages in thread
From: Martin Devera @ 2002-10-14 13:42 UTC (permalink / raw)
To: lartc
> >
> >cls_fw is not loaded ? (quick guess only).
> > devik
>
> tc filter add dev eth1 protocol ip parent 10:1 prio 1 fw
>
> can run !!
hmm can you try HTB3 ? I will not look into HTB2 anymore
but if there would be problem with HTB3 too (I've seen
similar report) then I'd look at it.
devik
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-10-14 13:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-10-14 13:24 [LARTC] 答复: Re: [LARTC] help, HTB2 and filter ? lihpc
2002-10-14 13:42 ` Martin Devera
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.