[LARTC] controling nat'ed network

[LARTC] controling nat'ed network

[Ethy H. Brito]

Dear Guru

How can I control the output traffic of variuous clients with various
classes when all the IP's will be singly nat'ed?

Client 1 - http Class (X Kbit)--> --+ 
Client 1 - pop3 Class (Y Kbit)--> --+ 
Client 2   http Class (X Kbit)--> --+----> master Class  (Z Kbit)--->
NAT addr Client 2 - smtp Class (W Kbit)--> --+
Client 3   pop3 Class (Y Kbit)--> --+

Regards

-- 

Ethy H. Brito         /"\
InterNexo Ltda.       \ /  CAMPANHA DA FITA ASCII - CONTRA MAIL HTML
+55 (12) 3941-6860     X   ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL
S.J.Campos - Brasil   / \ 
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] controling nat'ed network

[Stef Coene]

On Tuesday 15 October 2002 17:03, Ethy H. Brito wrote:
> Dear Guru
>
> How can I control the output traffic of variuous clients with various
> classes when all the IP's will be singly nat'ed?
Mark the packets when they enter the box and use that mark to filter the 
packets when they leave the box.  The mark will survivie the natting of the 
packets.

> Client 1 - http Class (X Kbit)--> --+
> Client 1 - pop3 Class (Y Kbit)--> --+
> Client 2   http Class (X Kbit)--> --+----> master Class  (Z Kbit)--->
> NAT addr Client 2 - smtp Class (W Kbit)--> --+
> Client 3   pop3 Class (Y Kbit)--> --+

Stef

-- 

stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/