RE: Re: Re: Re: [LARTC] help, a children can not borrow from a parent?

RE: Re: Re: Re: [LARTC] help, a children can not borrow from a parent?

[lihpc]

>>
>>   WHEN i send packets  from 10.1.1.1  at rate frome 12mbit to 50mbit BY
>> using
>> SMARTBIT 600, the rate of class 10:100 is always 12Mbits.
>>
>> >I suppose it's the SMATRBIT 600 that says it sends 12bits.
>> >WHAT if you change 12mbit to 15mbit.  WHAT if you send more then
20Mbit.
>>
>> WHAT
>>
>> >if you change 12mbit to a lower value (1mbit).
>> >CAN you can do that and post the results?
>> >I don't think there is an error in your setup.
>>
>> WHEN i change 12mbit to 15mbit and send packets  at rate
>> 15mbit,20mbit,30mbit,50mbit, the rate of class 10:100 is always 15mbits.
>> WHEN i change 12mbit to 30mbit and send packets  at rate
>> 30mbit,40mbit,50mbit, the rate of class 10:100 is always 30mbits.
>> WHEN i change 12mbit to a lower value (1mbit) and send packets  at rate
>> 1mbit,2mbit,10mbit,20mbit, the rate of class 10:100 is always 1mbits.
>The ceil parameter always worked for me.  What version of tc/htb/kernel
are
>you using?

TC from htb3.6-020525.zip
kernel  2.2.21 and patch ds9-2.2.21-2.diff rbtree-2.2.21-1.diff
ds9-htb3-2.2.21-1.diff
from http://www.ssi.bg/~ja/ds9/

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: Re: Re: Re: [LARTC] help, a children can not borrow from a parent?

[Stef Coene]

> TC from htb3.6-020525.zip
> kernel  2.2.21 and patch ds9-2.2.21-2.diff rbtree-2.2.21-1.diff
> ds9-htb3-2.2.21-1.diff
> from http://www.ssi.bg/~ja/ds9/
HTB 3.6 + kernel 2.4.19 are working for me.  You are using a backport of htb 
from 2.4 to 2.2.  Maybe they made an error when they backported htb.  Check 
it out with the maintainer (not Devik, but the one who created the files you 
us).

Stef

-- 

stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

RE: Re: Re: Re: [LARTC] help, a children can not borrow from a

[Julian Anastasov]

	Hello,

On Wed, 23 Oct 2002 lihpc@Legend.com wrote:

> >The ceil parameter always worked for me.  What version of tc/htb/kernel
> are
> >you using?
>
> TC from htb3.6-020525.zip
> kernel  2.2.21 and patch ds9-2.2.21-2.diff rbtree-2.2.21-1.diff
> ds9-htb3-2.2.21-1.diff
> from http://www.ssi.bg/~ja/ds9/

	I just upgraded to HTB 3.7 from 2.4.20pre11: ds9-htb3-2.2.21-2.diff

	I can't comment the HTB behavior, my tests with HTB were
very simple. In production I'm using this backport only for CBQ,
U32, SFQ, Ingress, policers. I have never observed deviations from
the 2.4 behavior. It would be good if you can compare the same
settings on 2.4.20pre.

Regards

--
Julian Anastasov <ja@ssi.bg>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

RE: Re: Re: Re: [LARTC] help, a children can not borrow from a

[Julian Anastasov]

	Hello,

On Wed, 23 Oct 2002 lihpc@Legend.com wrote:

	Ops, is that correct?:

> ipchains -A fw -s 0.0.0.0 -d 0.0.0.0 -j ACCEPT

	it should be

ipchains -A fw -s 0.0.0.0/0 -d 0.0.0.0/0 -j ACCEPT

Regards

--
Julian Anastasov <ja@ssi.bg>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/