Re: [LARTC] NETWORK ROUTES

From: "Ángel Carrasco" <falkom@arrakis.es>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] NETWORK ROUTES
Date: Thu, 24 Oct 2002 12:29:17 +0000	[thread overview]
Message-ID: <marc-lartc-103546275724415@msgid-missing> (raw)
In-Reply-To: <marc-lartc-103544439008094@msgid-missing>

Ok:

My office network is: 172.16.16.0/24 and his IP is: 172.16.16.1.
My web network is: 172.16.8.0/24 and his IP is: 172.16.8.1
My service network is: 172.16.4.0/24 and his IP is: 172.16.4.1
My public network is:213.250.143.240/28 and his IP is: 213.250.143.242.

The public router is 213.250.143.241 (and only works with the range
213.250.143.240/28)
The office router is 172.16.16.254 (and only works with the range
172.16.16.0/24)

The static default route is 172.16.16.254

This is my route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
213.250.143.240 0.0.0.0         255.255.255.240 U     0      0        0 eth0
172.16.4.0      0.0.0.0         255.255.255.0   U     0      0        0 eth1
172.16.16.0     0.0.0.0         255.255.255.0   U     0      0        0 eth3
172.16.8.0      0.0.0.0         255.255.255.0   U     0      0        0 eth2
0.0.0.0         172.16.16.254   0.0.0.0         UG    0      0        0 eth3

And my dinamic route to using the public network is:
ip rule add from 213.250.143.242 table publica
ip route add from default via 213.250.143.241 dev eth0 table publica
ip route flush cache

And the problem is when I try to use 213.250.143.242 in my internals
networks doesnt run because the information goes by 213.250.143.241 and not
in the normal routes.

Can you help me, please?

----- Original Message -----
From: "Stef Coene" <stef.coene@docum.org>
To: "Ángel Carrasco" <falkom@arrakis.es>; <lartc@mailman.ds9a.nl>
Sent: Thursday, October 24, 2002 1:45 PM
Subject: Re: [LARTC] NETWORK ROUTES

On Thursday 24 October 2002 09:23, Ángel Carrasco wrote:
> Hi all,
>
> I have a debian server with 4 network cards:
> The first card is used to connect to public network and this network
> connects with a big router.
> The Second, third and fourth cards are used by other networks.
> The first card used a dinamic route with the big router.
> The other cards used a static route with a little router.
> All runs good but my problem is when I try to use the IP of my first card
> in my internals networks
> doesn't work because, all information doesn't go by internals networks, it
> goes by the big network.
Can you clarify this a bit?  Routes, ip-adresses, what you tried, what's
working, what's not working, ...

Stef

--

stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/